Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | mickandyp | Posted: | Jan 14, 2020 07:26 | Subject: | Inventory Change Request for Set 76103-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3010 Black Brick 1 x 4 (Counterpart)
Comments from Submitter:
Brick 1 x 4 with White upside down Triangle Pattern (Sticker) - Set 76103. Sticker #2
|
|
Author: | tons_of_bricks | Posted: | Jan 14, 2020 06:32 | Subject: | Naginata 41159pb01 two different colors. | Viewed: | 56 times | Topic: | Catalog | Status: | Open | |
|
| I have 11 new Naginatas all from the Titan Mech set 70676. However, there is
an obvious color difference among them when held up to the light. 5 of them look
trans-black, and the others look trans-dark blue (even the staff of the piece
has a bluish look when held just right in the light).
But the current Bricklink catalog only has Naginatas with a trans-orange blade
and trans-light blue, both of which mine don't fit. Does anyone else with
these pieces notice this color discrepancy? I'm not sure how to list these
pieces as I feel I'd be listing them incorrectly.
|
|
Author: | axaday | Posted: | Jan 14, 2020 06:15 | Subject: | Inventory Change Request for Set colsh-9 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 92338 Dark Purple Chain 5 Links (Extra)
Comments from Submitter:
Randy fixed the other extra on this set. I neglected to get them in there.
|
|
Author: | axaday | Posted: | Jan 13, 2020 17:03 | Subject: | Inventory Change Request for Set 6543-1 | Viewed: | 38 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {x77a String, Cord Thin (Undetermined Length) to x77ac75 String, Cord Thin 75cm}
* Change 1 Part Black {3962 Minifigure, Utensil Radio (Undetermined Handle Type) to 3962b Minifigure, Utensil Radio with Extended Handle}
* Change 5 Part Brown {2536 Plant, Tree Palm Trunk - (Undetermined Connector Version) to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
* Change 4 Part White {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud or Hollow Stud}
Comments from Submitter:
My string is actually 77.5 cm.
Pics to Follow
|
|
Author: | SezaR | Posted: | Jan 13, 2020 16:31 | Subject: | Inventory Change Request for Set 113-2 | Viewed: | 39 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part bb0007pb01 Blue Electric, Motor 4.5V Type A 12 x 4 x 4 with 4.5V stamped on front (match ID 11)
* Delete 4 Part trainrim Light Gray Train Rim for 4.5V & 12V Locomotive Wheels
* Delete 4 Part wheel1b Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor
* Add 4 Part wheel1bc01 Red Train Wheel with 2 x 2 Stud Center, Beveled Tread and Cam Axle for Motor with Light Gray Train Rim for 4.5V & 12V Locomotive Wheels (wheel1b / trainrim)
* Change 1 Part Blue bb0007 Electric, Motor 4.5V Type A 12 x 4 x 4 {match ID 0 to 11}
|
|
Author: | StormChaser | Posted: | Jan 13, 2020 11:34 | Subject: | Pattern 1. Pattern 2. | Viewed: | 164 times | Topic: | Catalog | Status: | Open | |
|
| There seems to be an increasing trend of identifying patterned parts by simply
calling them Pattern 1 and Pattern 2. Here are three random examples of recent
parts, but I could go on for a while.
I would caution against this practice of non-descriptively titling items. In
fact, I was hoping the site would move away from things like this, not more toward.
Although I suppose we could greatly simplify all titles by simply going the Mini
Upper Part "No. 1470" route that TLG uses.
|
|
Author: | go4bob | Posted: | Jan 13, 2020 06:23 | Subject: | Inventory Change Request for Set 3186-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3024 Trans-Red Plate 1 x 1 (Extra)
|
|
Author: | dcarmine | Posted: | Jan 12, 2020 15:25 | Subject: | Another inconsistency | Viewed: | 163 times | Topic: | Catalog | Status: | Open | |
|
| Inconsistency is a pet peeve of my, so you know it's my last nerve on this
issue.
I haven't parted out much lately, but I got an opportunity to part out 3
of the 2019 Star Wars Advent Calendars
For the last 9 years TLC has included a Winter-ized SW figure in the 24th position
on the calendar. I saw that this last year was a Porg Santa. I didn't look
at the BL inventory to see how the subsets were being handled before I started.
I wanted to preserve the Porg Santa as a complete fig and part out all the other
"parts only" droids.
After finishing the sorting, I went to upload the part-out to BL. And that's
when I found it....Porg Santa was a part out...grrr. But the Gonk and Mouse
droids were left to sell whole...grrrr.
Who decides this stuff? How hard is it to be more consistent? I know there
is a lot of discussion about "What SW Droids are figures" and what are not.
But geesse, SMH.
Just my two cents.
Thanks for reading, no changes are expected.
Donna
|
|
Author: | Odur | Posted: | Jan 12, 2020 14:36 | Subject: | Inventory Change Request for Set 60153-1 | Viewed: | 45 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 2599a Lime Minifigure, Footgear Flipper (Extra)
* Delete 1 Part 32918 Trans-Clear Plastic Triangle 6 x 12 Sail with Dark Blue Wave in Circle and Dark Azure, Dark Blue and Green Markings Pattern (Extra)
Comments from Submitter:
Inventory from a new sealed set
|
|
Author: | chetzler | Posted: | Jan 12, 2020 11:39 | Subject: | Please include Tax field when download orders | Viewed: | 120 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I recently dowloaded my orders in Excel format here:
https://www.bricklink.com/orderExcel.asp?orderType=received
I've done this before but I am now making a concerted effort to import this
into my own database primarily for tax purposes. I just realized that the process
imports every field except for Tax. Surely this was an oversight since the tax
field was added later. However it is frustrating because it means I still have
to manually search out every Minnesota order manually to calculate my total 2019
sales tax collected.
Surely this will be an easy fix and it can be corrected promptly!
Thank you,
-Chris
|
|
Author: | elias3 | Posted: | Jan 12, 2020 04:39 | Subject: | Inventory Change Request for Set 60042-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
source: part out sets and own collection
|
|
Author: | foxweasle | Posted: | Jan 12, 2020 02:52 | Subject: | Set 75248 Inventory Awareness | Viewed: | 191 times | Topic: | Inventories | Status: | Open | |
|
| I thought I would post this Discussion to bring to the members awareness of a
possible misinterpretation of the Inventory list of Set 75248 Star Wars Resistance
A-Wing Starfighter. The inventory is listed correct as I see it. I just opened
a sealed complete set and confirmed the Inventory. The only Item in Question
is Part 15303 Trans-Red Bar 8L with round End (Spring Shooter Dart). In the Instructions
it does show 3 Items are used but only 2 are actually used in the set. At first
I would think the 3rd piece would be considered an extra part, but since all
three are listed in step 101 the last Instruction step. The Inventory should
remain unchanged.
|
|
Author: | CamelCityBH | Posted: | Jan 11, 2020 22:50 | Subject: | Inventory Change Request for Set 60178-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 6239 Black Tail Shuttle (Counterpart)
Comments from Submitter:
There is no entry in inventory for the 6239 Tail Decorated with sticker #2 and #6.
|
|
Author: | Tom_a_Jerry | Posted: | Jan 11, 2020 18:38 | Subject: | Inventory Change Request for Set 75194-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 58176 Trans-Red Bar with Light Cover (Bulb) / Bionicle Barraki Eye (Extra)
Comments from Submitter:
Hi, I've built this set from a sealed box and found one extra part not displayed in the inventory, so I'm reporting it.
|
|
Author: | Mortimer | Posted: | Jan 11, 2020 18:28 | Subject: | Inventory Change Request for Set 76073-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4624 Light Bluish Gray Wheel 8mm D. x 6mm (Extra)
Comments from Submitter:
From MISB set.
|
|
Author: | elias3 | Posted: | Jan 11, 2020 13:19 | Subject: | Inventory Change Request for Set 60020-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (Alternate) (match ID 1)
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 4 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (Undetermined Version) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 4 Part Light Bluish Gray {42610c01 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5 x 6 Shallow Staggered Treads (42610 / 51011u) to 42610c03 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409)} {Counterpart to Regular}
Comments from Submitter:
source: part out sets and own collection
|
|
Author: | elias3 | Posted: | Jan 11, 2020 13:14 | Subject: | Inventory Change Request for Set 60026-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (Undetermined Version) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 2 Part Light Bluish Gray {42610c01 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5 x 6 Shallow Staggered Treads (42610 / 51011u) to 42610c03 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409)} (Counterpart)
Comments from Submitter:
source: part out sets and own collection
|
|
Author: | elias3 | Posted: | Jan 11, 2020 13:09 | Subject: | Inventory Change Request for Set 60025-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 3 Part 3794b Red Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 1)
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 5 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (Undetermined Version) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 3 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
* Change 5 Part Light Bluish Gray {42610c01 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5 x 6 Shallow Staggered Treads (42610 / 51011u) to 42610c03 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409)} (Counterpart)
Comments from Submitter:
source: part out sets and own collection
|
|
Author: | SezaR | Posted: | Jan 11, 2020 08:15 | Subject: | Inventory Change Request for Set 6274-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4502c01 Yellow Minifigure, Plume / Feather Wheel, 3 on Sprue (Counterpart)
|
|
Author: | Yogi_007 | Posted: | Jan 11, 2020 05:30 | Subject: | catalogue problem - zero lots showing up | Viewed: | 87 times | Topic: | Catalog | Status: | Open | |
|
| Hi All,
Ive been looking for through the catalogue for various parts and have found that
some lots are coming up as zero available but still showing up for sale.
I was looking at 3700 technic 1x2 brick in dark green last week and the stores
showed up with zero in stock in the catalogue. I checked again today and all
resolved.
I then looked at orange part 6005 and same thing.
Whats going on ??
Seems off to me or is it related to these rarer parts ?
Help please
Yogi
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|