Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | FlamesFire101 | Posted: | Oct 27, 2019 15:24 | Subject: | Four New Stud.io Pieces | Viewed: | 64 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Four pieces that I would like to see added are:
Black Large Figure Torso Skeletal with Gear Hips / Waist / Bottom
Pearl Dark Gray Large Figure Torso Skeletal Connector with 2 Ball Joints
Flat Silver Bionicle Armor Uniter with 2 Pin Holes on Front, Axle and Pin Holes
on Sides
Pearl Gold Bionicle Armor Uniter with 2 Pin Holes on Front, Axle and Pin Holes
on Sides
These four would be very good for 2016 uniter mocs, as it is currently difficult
to make them
|
|
Author: | november3 | Posted: | Oct 27, 2019 00:45 | Subject: | Stud.io Piece not found and needs to be added | Viewed: | 58 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| stud.io is missing some pieces which I know but it has the majority of star wars
custom peices exept for 1 and heres 1 I need:
Trans-Red Dish 4 x 4 Inverted (Radar) with Solid Stud with Radial TIE Fighter
Cockpit Pattern
|
Author: | AZbrickGUY | Posted: | Oct 18, 2019 00:20 | Subject: | Custom minis | Viewed: | 114 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hey all,
Has there ever been a spot for custom minis? Any way we could add
a spot? Mainly MOC out of existing parts that are out there. Not hand made or
painted parts. Thanks.
|
|
Author: | net1986 | Posted: | Oct 17, 2019 09:29 | Subject: | Very necessary suggestion? | Viewed: | 210 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hello! I'm net1986 from South Korea!
I would like to suggest something today.
First of all I apologize for my poor English grammar, please understand.
This is what I would suggest this time.
"I wish there was function to view information of just part product from the
set, Not whole set. And function to order those just part product."
For example,
1. I want to get only police swat van from set 60008 Museum Break-in.(don't
need any part like figs or Museum)
2. But there is only brick information for whole set(Unnecessary a lot of information
confuses me)
3. It takes a lot of hard work to analyze for only just the swat van.
4. And It's very hard to order each part brick for the van
What I mean is that I wish there was a function to view a only part product(just
swat van of set 60008)and I wish I would order those part in way "easy buy".
I know that the "east buy" function already exists.
It's very helpful for restorers.
But now, It adjust only set product or MOC product as I know.
So, I wish the "easy buy" function is more enhanced(add part product from set)
I hope you guys understand my words.
reply me, thanks.
Best regard,
|
|
Author: | Graham. | Posted: | Oct 10, 2019 15:33 | Subject: | Communication difficulties | Viewed: | 151 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| The first is folks sending messages directly to my PayPal and BrickLink notifications
email address. Which I don’t check on a regular basis.
Wouldn’t it be better all round if the user email address were hidden? therefore
emails would have to go thru the message system.
Leads to the second. BrickLink notifications are often delayed by two or three
days, then they all come thru together. Which is why I don’t check that mail
box often. Fairly frequently I receive the order placed notification AFTER I
have shipped the order!
I check messages on site, every morning when I first log on.
Also would benefit BrickLink as it would be far more difficult to trade off site,
if anyone were so inclined.
Please give this some consideration, it works well on the other place.
Thanks, Graham
|
|
Author: | jakyasar | Posted: | Oct 7, 2019 07:10 | Subject: | Database for inventory | Viewed: | 99 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi all
As the number of sets/pieces growing, I need to start cataloging my inventory
to avoid double purchases.
Any recommendations for such program to keep track of inventory is appreciated.
Thank you
|
|
Author: | axaday | Posted: | Sep 30, 2019 06:10 | Subject: | Limit Shipping Method to One Customer | Viewed: | 97 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I just opened a shipping method that I keep closed to avoid confusion because
it allows an international customer to instant checkout using domestic shipping
rates. It is for international customers who have a friend or forwarding service
in the US, but I keep it closed to avoid accidental or intentional misuse. It
would be handy if I could limit that to a country or to a specific user.
|
|
Author: | jaydotjay | Posted: | Sep 28, 2019 08:24 | Subject: | Thumbnail Size | Viewed: | 70 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Is it possible to customize or change the thumbnail size when searching in the
catalog? I'm not sure if it's a setting I missed, but it would be useful
to when you're overlooking an entire line to find something specific.
|
Author: | GregSwiss | Posted: | Sep 23, 2019 06:47 | Subject: | Sort by in Wanted List | Viewed: | 55 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hello
Would it be possible to implement a new sort by-option in the Wanted List?
What I would like to see is "Missing" what would be the difference between "Wanted"
and "Have".
Cheers
Greg
|
|
Author: | Bitsnpieces.... | Posted: | Sep 22, 2019 01:40 | Subject: | Quote System/Cart to be like a Store Cart | Viewed: | 90 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Quote system/Cart
Can we get the quote system/cart to be the same as the store cart?
As we all know with the Store cart when an item gets sold or the quantity differs
than you put in your cart, you can adjust the items in your store cart, or delete,
and your store cart is still active, and can remain active until you go through
with the order or empty it completely.
Can we get the quote system/cart to be like the store as well?
Rather than just losing everything in the quote cart when its gets cancelled
by whatever reason, and having to start all over again?
Rob
|
|
Author: | ihave36paws | Posted: | Sep 20, 2019 12:49 | Subject: | Layout | Viewed: | 110 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| How can you change the Classic Layout. If you are going to make changes to things
it would be the new Layout.
We hate the way they removed the (My Order Note) line from under the order.
Now you have to travel way over to the right to see it, unless you have your
screen so small that you can't read it.
Please change it back.
|
|
Author: | kelmgo | Posted: | Sep 17, 2019 12:33 | Subject: | Request a Quote | Viewed: | 124 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I am after a few pieces to complete a few kits and am going from one checkout
to another, then to another and then cancelling the orders (before payment) because
the vendors haven't got the "Request a Quote" provision set up.
Clearly it would save a lot of stuffing around if you know the full cost incl
P&H before hand.
Even better - there should be a little icon or something next to the vendors
name to indicate whether they send quotes or not so you don't have to go
through the checkouts to find out right at the end.
This is what I'm experiencing in Australia
|
|
Author: | Nowaker | Posted: | Sep 14, 2019 22:20 | Subject: | Search setting: seller location filter | Viewed: | 90 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I'm interested to see offers from United States only.
Each time I'm on a hunt for something, I have to open the filtering options
and select selector location United States.
Please make it possible to set a default filter for all searches. It should be
available here: https://www.bricklink.com/searchSettings.asp?viewFrom=P
This will improve the shopping experience immensely.
Thank you.
-Nowaker
|
|
Author: | kaiser1401 | Posted: | Sep 13, 2019 10:20 | Subject: | Stud.io feature: background image or sketch | Viewed: | 51 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| First: Is this the right part of the forum to suggest features for stud.io? Where
else can I contact developers file bugs, propose features etc?
I think it would be nice to be able to import a sketch, drawing, photo as a background
plane (either xy-plane, one of the three or freely positioned) and scale it to
your needs. I think this would help me designing models way more easily if I
can base it on a drawing, blueprint, etc.
Any opinions on that?
-Kaiser
|
|
Author: | HallBricks | Posted: | Sep 12, 2019 10:44 | Subject: | Change time zone | Viewed: | 95 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| It would be great if I could change the time zone on BrickLink. Maybe not the
most necessary feature, but it feels like it wouldn't be that difficult of
a thing to implement.
|
|
Author: | BrickTobi | Posted: | Sep 11, 2019 15:55 | Subject: | Remark in PartOut | Viewed: | 64 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| At the moment I have to search very time-consuming for the remarks when distributing
new parts, which are already in my invetory. Currently I always have to jump
into the inventory and take over the remark.
My suggestion would be to transfer the existing remarks already into the corresponding
fields. This function can also be optional (only if I want to transfer the old
remarks).
I would be very happy about this function.
Thanks and greetings
|
|
Author: | axaday | Posted: | Sep 11, 2019 13:11 | Subject: | New Relationship - Items Reference Each Other | Viewed: | 103 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I would like to propose a new relationship for the catalog. Items that reference
each other. Some examples are below.
and
===
and
===
and
===
and
===
and
|
|
Author: | irdroid3 | Posted: | Sep 11, 2019 06:35 | Subject: | Can we have another order status? | Viewed: | 138 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| It would be useful to have an Order status to go between "Received" and "Complete"
- something like "Queried" or "Querying" - for when I have started a communication
with the vendor - it's almost complete, but maybe a part missing?
Cheers, Ian
.
|
Author: | BrickTobi | Posted: | Sep 9, 2019 07:05 | Subject: | Remark in validation process | Viewed: | 65 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I miss the remarks by adding a new part to my invetory. if I have the part in
the invetory there is shown the old price but not the old (and new) remarks.
thanks and regards
tobias
|
Author: | Shintaku | Posted: | Sep 9, 2019 04:18 | Subject: | More stockrooms! | Viewed: | 142 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I personally am fine with three but I've heard people complaining that 3
stockrooms are very few, as you can have a lot of wanted lists, a lot of featured
items, it's limitating that you only have 3.
I don't think it would be dramatic to increaase this number.
What do you thinK?
|
Author: | TeeBoxLu | Posted: | Sep 8, 2019 21:01 | Subject: | new tile category - with stickers only | Viewed: | 117 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I would love to see tiles with stickers as a separate category from printed tiles.
I have seen this topic discussed on a few Lego Facebook Groups as well.
|
Author: | gizmoh | Posted: | Sep 6, 2019 05:00 | Subject: | order download - missing weight totals | Viewed: | 68 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi All,
Maybe a stupid question, but why is the order details on the site the weight
of all items (so Lot weight x items ordered) and if you download it, the weight
of 1 unique lot.
Second, is it possible to have the total estimated weight per order on the Download,
like it's shown online in the order?
This because I like to see/calculate the average price/kg and the average price/piece
for my orders.
Gizmoh
|
|
Author: | sandrainnz | Posted: | Aug 29, 2019 22:43 | Subject: | Add new wanted list sort feature - Difference | Viewed: | 52 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi, sorry if this has been suggested before but I cannot find it. It would be
great to have an ability to sort a Wanted list on "Difference" which is what
I want minus what I have. Then I can see what is missing and try to borrow the
parts from friends.
(= Want - Have).
The system must have this, otherwise the Buy All feature would not work correctly.
So please can it be an option in the Display pull-down box?
Thanks
|
|
Author: | primadeluxe | Posted: | Aug 29, 2019 01:18 | Subject: | Need of inventory of parts sw12v1rightM/leftM | Viewed: | 71 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi, just asking for your opinion, because I am wondering if there is a need for
inventory of parts sw12v1rightM and sw12v1leftM? I think there is, because my
white axle is broken off and to replace this I have to buy a complete switch!
As there are several parts like the screw, case and white axle, in my opinion,
it is usefull to add a inventory of these parts. What is your opinion? Greets,
Wilbert
|
|
Author: | Gaston.La.Brick | Posted: | Aug 23, 2019 13:51 | Subject: | Email vs Message systems | Viewed: | 106 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| When a buyer contacts me, using the contact form on BL, I get an email from BL
with the message. However, replying to that email just results in a bounced email.
I am forced to go into BL message center and copy/paste my text. Even worse when
I need to reply with an attachment (like a photo of a brick): not an option.
This all ends up in two // streams of communication: some messages are sent using
BL, others over direct email.
I'm forced to use a communication medium (BL) that is not adequate. Until
it's adequate, I would suggest to remove the "Messaging" feature all together.
Until BL can offer a mature messaging feature that makes direct email obsolete,
I would suggest to remove the Message feature (and point the users to direct
email contact). Now it's just a very confusing and annoying mix of communication
channels.
|
|
Author: | Remko100 | Posted: | Aug 23, 2019 11:03 | Subject: | Auto-fill "my cost" for part-setting | Viewed: | 54 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I would like to see the simple option to auto-fill the "my cost" during part-setting.
Other fields auto-fill (6 months average-sales of the option to use old remarks,
etc., even old/new average "my cost").
When I am part-setting I like to keep count of the average part-cost. When part-setting
bigger sets I will have to fill these out (copy/paste) 300-400 times, depending
on the lot-count. Absolutely killing my motivation. If I can choose one number
on the first part-out screen, it can be filled-out in the overview. Some lots
I change (baseplates/minifigs/stickersheet are not 6-7 eurocents "cost", but
| 90% of the lots gets the same number.
|
I can;t imagine no one has had the idea to implement this before.
Kind regards,
Remko
Its a Bricky World
|
|
Author: | kreativsnail | Posted: | Aug 17, 2019 14:45 | Subject: | Known colors | Viewed: | 77 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I would really really really like to see a message when you try to list an item
in a colour that it wasn’t ever known to be in a set. This would cut down on
the HUGE number of mislisted incorrect colours. It would be a huge help. And
those of us that are really listing rare non-production colours would probably
be fine with clicking the “yes, I know this is crazy rare, I want to list it
“ button. The known colours info is already on the site, but many BL sellers
are obviously not looking at it.
|
|
Author: | Illuminatus | Posted: | Aug 10, 2019 09:54 | Subject: | Sorting Wanted Lists Alphabetically | Viewed: | 49 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| It would be really helpful if the site could memorize your last "sort by" setting
in every section and consider it your default, without exception.
For example, if I open a specific wanted list and sort it by item number, then
every next list I open will also be sorted by item number until I set it back
to "item name."
However, no matter how many times I open the master wanted list, i.e. my list
of wanted lists (lol), and sort it alphabetically, as soon as I refresh or revisit
the page the sorting is set back to "newest."
It would be really great if this could be... sorted out.
Thanks and sorry if this has been brought up before.
|
|
Author: | Jamesf077 | Posted: | Aug 9, 2019 15:04 | Subject: | Country flag icon on sales posts | Viewed: | 164 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| It would be really helpful if the 'sales' posts in the marketplace discussion
page had a stores country flag icon next to the username. To be able to see at
a glance would save us having to click on each post to find out. Personally I
tend not to buy outside the EU because of shipping costs and taxes.
|
|
Author: | slm2mars | Posted: | Aug 9, 2019 07:15 | Subject: | Add sub-serinal numbers to normal items | Viewed: | 71 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hello
Many times i search for a decorated items (xxxxPBxx for an exemple).
Exemple
I have this one :
2440pb002 / https://www.bricklink.com/v2/catalog/catalogitem.page?id=2911#T=C
But it sadly never appears when we search for 2440 (what's only written on
the part)
And that's only thanks a long search on some other website that i finally
could find it on brickink.
So, is it possible to add all those sub-serial numbers to the normal search
For an exemple it could be a new COLOR category : decorated.
Or as for my exemple, it is a black part with decoration, so to put it in the
BLACK color.
Thanks a lot in advance
WOULD HELP A LOT in searches.
best wishes and long live your fabulous website
|
|
Author: | PzKpWRexFives | Posted: | Jul 30, 2019 22:52 | Subject: | Easier wanted list viewing | Viewed: | 90 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| At the wanted lists "home page" there's obviouly the list of all your wanted
lists. But on the left, there's a menu where you can click on different part
catagories, set themes, minifigure themes, and such to see what you want from
that subsection across all your wanted lists. I would like the ability to filter
this to look at certain lists and not others, simular to when you're looking
at a store and can choose which wanted lists you want to buy for. I have 18 lists
and it is a little crowded and difficult to compare 2-4 lists with all that extra
information.
|
|
Author: | PzKpWRexFives | Posted: | Jul 30, 2019 22:35 | Subject: | Recently updated sorting option for stores | Viewed: | 75 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| When looking at items in a store there are several options on how to sort the
items (price, quantity, color, etc). I would like a RECENTLY UPDATED option to
be added. This is simular to the RECENTLY ADDED, but not quite.
Recently it took me a few days to finalize a cart and I noticed price and quantity
changes for items in my cart. So I went back to the store to see if pieces I
thought were too expensive had gone down or if more pieces were added to an item
I wanted more of. But I couldn't find an easy way to see this without going
through every item again (which takes a while then there are hundreds of items
in my wantedlists/cart).
The RECENTLY ADDED option just shows when a piece was first added, not updated.
For instance the store I was in, said the most recent item was added in 2012.
This shows a false sense of inactivity which is obviouly wrong when stuff is
changing in my cart and this store has fulfilled thousands of orders. This additional
option would help people like me in simular situations, those who have recently
bought from the store and want to buy again, or who are adding to an order over
the next week or so (I see alot of store allowing this).
|
|
Author: | tpr | Posted: | Jul 30, 2019 10:13 | Subject: | Appoint a new administrator | Viewed: | 254 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi
I know a lot of work goes on behind the scenes with volunteer administrators
who do a damn good job with the catalogue and inventories.
Is it about time Bricklink appointed an (or more) administrator (s) to oversee
the selling side of Bricklink.
Bricklink would not exists without its revenue from sellers putting in time and
effort to sell and pay fees to Bricklink.
Surely it is only fair to sellers and buyers that items for sale conform to the
rules. If items are being mis-represented they should be removed or sellers given
the opportunity to amend their listing.
It would be nice if Bricklink appointed people to oversee the selling side of
the business. Sellers may then start conforming with their listings
tpr
|
|
Author: | bb37988 | Posted: | Jul 21, 2019 00:37 | Subject: | Lego Game Category Needed | Viewed: | 121 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| In searching through the categories for Lego sets, I could not find one that
included Lego games. Over the years Lego has produced many games: chess sets,
mazes, Heroica, etc. Is this omission an oversight or is it because there is
little market for used game sets? In either case, I felt disappointed in the
absence of such a category.
|
Author: | Umpfinho | Posted: | Jul 17, 2019 09:54 | Subject: | wish list on checkout | Viewed: | 58 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi.
Is it possible to create a list after the checkout, in which the wish lists can
be recognized, where the parts came from?
Maybe with a new function?
Would be great!
|
Author: | Umpfinho | Posted: | Jul 17, 2019 09:50 | Subject: | checking function for buyers? | Viewed: | 68 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi.
Would it be possible to add a function that would allow us (buyers) to check
our orders part by part? (using a hook or something like that)?
For more than 100 parts it's always very cumbersome, with printing lists
or something like that.
It would be great!
|
|
Author: | NorthJ90 | Posted: | Jun 30, 2019 08:03 | Subject: | Connecting to Royal Mail | Viewed: | 101 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| It would be so much easier if BrickLink could connect to Royal Mail and download
orders like you can on eBay. I’d be happy to pay a little more on fees to accommodate
it.
Also if the shipping could be a little easier, I used to prefer the old way of
selecting a country, but I know the change was for auto invoicing etc.
Is there any guide that can help me or suggestions on making things easier?
|
|
Author: | steigdg1 | Posted: | Jun 28, 2019 17:02 | Subject: | Add own store to Buy Wanted List | Viewed: | 61 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I would love to be able to take all of the items in my own inventory and include
them as the cheapest (e.g. zero cost) option for any wanted list search. Right
now my store doesn't seem to show up at all, and it won't let me buy
from myself.
I can search for inventory items that are in a wanted list, but I can't automatically
mark them as 'Have' in the wanted list. So I have to print the list
and then go through by hand and mark the quantities in the Wanted list. Seems
like if I could just do it all in the Wanted List Buy screen, it would be easy!
|
|
Author: | broomhandle | Posted: | Jun 21, 2019 18:25 | Subject: | about to make notes in orders | Viewed: | 77 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| When I make a purchase from a store, it could be for 3 or more builds. I would
like to be able to make a note on the order page, or a link to which want list.
This would help, a lot of the time, after a week or so shipment. I forget...
|
|
Author: | ACBuilds | Posted: | Jun 20, 2019 21:40 | Subject: | Hiding items in wanted list | Viewed: | 92 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I don't want to see certain items on my lists but I want them to still be
on my lists.
When I am sorting through my pieces and finding pieces that I already have before
needing to buy more, I want to hide the pieces I either confirm that I do not
have or hide the pieces I have already.
I know I can sort by quantity but that still shows pieces that I have looked
for and do not have.
What is left visible on the lists will be pieces that I have not yet looked for.
I have gotten around this in the past by creating multiple wanted lists per project
and moving pieces to lists that say need to buy... but that has made my wanted
lists messy and I would prefer clean wanted lists.
|
|
Author: | brum_blue | Posted: | Jun 20, 2019 11:48 | Subject: | Add ability possible to search carts | Viewed: | 61 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Add the ability to search all carts by the name of an item. Sometimes I take
a while to build list of parts in several carts, for different stores. This process
may take several days (on and off). It would be very useful to see if I have
already put a part in a cart.
Thanks for considering.
|
|
Author: | bb1415098 | Posted: | Jun 12, 2019 06:54 | Subject: | There should really be an FOV slider! | Viewed: | 126 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I apologize if this is for suggestions for the website specifically, but I couldn't
find where to submit suggestions for the Bricklink Studio program itself. The
field of view in the view port is waaaay too narrow. If possible, a simple FOV
slider that goes up to at least 90 degrees would be enough to make using the
Studio program so much more easier, not only so I can see more but it so it won't
make me nearly as dizzy to use. Thanks for reading this, and I again apologize
if this was the wrong place to post this but I couldn't find any other place
to suggest this.
|
|
Author: | WhiteHorseMatt | Posted: | Jun 8, 2019 05:47 | Subject: | 'Prefer My BrickLink Classic?' | Viewed: | 155 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Can we please remove the 'Prefer My Bricklink Classic?' (and the corresponding
one from the old screen) from the top of the 'My Bricklink' page.
It takes up loads of screen real estate and would be as a tick box on a display
settings option.
I think after it being there a year most people will have chosen which style
they prefer.
Matt
|
|
Author: | jonwil | Posted: | Jun 5, 2019 05:51 | Subject: | Suggestion for battery boxes | Viewed: | 87 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I think all battery boxes (and other parts that take batteries) as well as the
sets that contain them should have a statement "this part/set takes xyz batteries"
to let people know what batteries they need.
A few items contain such information in their "notes" but its inconsistent (ideally
it should cover all the items that need batteries and possibly be a specific
field rather than just notes)
|
|
Author: | bb1404048 | Posted: | Jun 1, 2019 00:09 | Subject: | Option to Donate to reach min. buy | Viewed: | 190 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| This is a fairly bad marketing idea for shops that probably don't work out
in the shops favour. I know a majority of my browsing has ended up in me taking
my business and money to another shop. Where I am either buying from someone
without a min buy, or selecting other items I actually want to hit that minimum
purchase amount. So my suggestion is to add a donation field/possibility to finish
passing the required purchase line.
I have only made 3 purchases since I joined but these 3 people are profiting
by shop deterrence over the min buy. One of which was a difference of 3 cents
to the min buy vs. paying 1 cent more for the same thing because it didn't
have one.
|
|
Author: | CCBricks | Posted: | May 28, 2019 08:39 | Subject: | Embedding pictures in contact function | Viewed: | 72 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Good morning all,
Is there a way to send photos via the contact option? I have a potential buyer
interested in a certain minifigure and wants photos. I'm happy to oblige,
but can't figure out how to send photos. I dont have the email address so
I can't send then that way. I tried using the Help section. But was unsuccessful.
any help is appreciated.
Brian
|
|
Author: | alexbinary | Posted: | May 28, 2019 01:23 | Subject: | Warning to seller for inconsistent config | Viewed: | 189 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hello,
After some time as a buyer, I just opened my store on BrickLink.
At first I was only shipping domestic so I configured domestic shipping method
and checked only the domestic checkbox for PayPal payments.
I am now opening to international sales, so I configured international shipping
methods, but I had forgotten about the international checkbox for PayPal and
did not check it.
I got messages from potential buyers saying they could not checkout because I
had not configured a payment method.
I do not understand how enabling international shipping without international
payment can make sense, so I would assume that anyone who did this made a mistake.
My suggestion is to have BrickLink check for this inconsistent configuration
and at least warn sellers about it, or maybe even prevent it from happening.
Thanks
Alex
|
|
Author: | DeLuca | Posted: | May 27, 2019 20:46 | Subject: | Rewording of Forum Rule #4 | Viewed: | 184 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| I recently noticed that the wording of Forum Rule #4 is quite odd. While I do
understand the meaning of the existing version, it is structured awkwardly and
ambiguously (such that, for example, it could indicate that offensive
words are not to be replaced with pornography!).
A revised version of Rule #4 (such as I have drafted) would clarify what, precisely,
is defined as "offensive" (as this is a highly subjective term), as well as making
the sentence-structure more understandable - Particularly to non-native English-speakers.
Existing:
"Posts should not include foul language, lewd, or other offensive content, or
links to such content. This includes replacing offensive words with alternate
letters or characters, pornography, or any kind of racial/prejudicial content."
Revised:
"Posts should not include offensive content, nor any links to such content, including:
Profane, foul, lewd, pornographic, violent, or prejudicial language or images.
Replacing censored words with alternate letters or characters, or editing images
to obscure forbidden content with pixilation or black bars, is also prohibited."
|
|
Author: | calsbricks | Posted: | May 27, 2019 05:50 | Subject: | Helpful but .... | Viewed: | 233 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Firstly let me say that we know suggestions are not being implemented and according
to MP no work is being done on the classic site however this is a small request
which doesn't require huge amounts of development time and would make life
a bit easier.
Currently the method of manually adding inventory is long winded, provides no
audit trail of what has been done and at best is clumsy.
We use Brickstock for most of our updates to our store. It is much easier, quicker
and provides us with a complete audit trail - the only real snag is what happens
when the file gets to Bricklink, The verify screen drops off the Bricklink part
number for some reason so we are left with an audit trail which, when variants
are involved, isn't really all that helpful, although to be fair we have
used this for some time.
Simply placing the bricklink product code on the verify screen would be very
helpful and this is not a major programming issue. At the same time give us a
print button to print that screen Using the print command from the browser doesn't
work well with the page setup falling short of what is needed.
This is a simple matter and could be resolved in minimal time - please implement.
|
|
Author: | bb1126827 | Posted: | May 9, 2019 10:29 | Subject: | New Rigid Hoses flex | Viewed: | 96 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi Studio Devs,
thanks for adding rigid hose flex feature
i am actually trying that new feature and cant seem to make it work on that type
of projet (attached picture)
looks like the tip of the hose wont follow camera orientation. it is always facing
my mouse cursor in all camera modes/orientation. That said, i just cant plug
the tip of the hose in the proper way as you can see on the picture. Maybe i
need tips on that to make it work.
Keep doing a great job on studio
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|