Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Fragty | Posted: | Sep 5, 2019 17:24 | Subject: | Re: Help with another color | Viewed: | 26 times | Topic: | Colors | |
|
| Yes this is "brittle blue" for sure.
It fits the color, its fits the time period
See here for more info about what brittle blue is:
https://www.flickr.com/photos/126975831@N07/15210784018
ps some ppl might collect these
|
|
Author: | bb316892 | Posted: | Sep 5, 2019 16:52 | Subject: | Re: Help with another color | Viewed: | 22 times | Topic: | Colors | |
|
| In Colors, detroitbricks writes:
| In Colors, mmookk61 writes:
| In Colors, detroitbricks writes:
| Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
Put the set number into the list inventory button and see if there are two different
blues listed. What set is it?
|
I realized the lighting in my house in terrible, I tried for many pictures and
think this is it. The set is 3854 The Krusty Krab, and it says there is a 1x3
blue brick and the blue 1x2 jumper. Both are this weird blue and its 100% this
color even inside the brick.
|
Set 3825?
|
|
Author: | detroitbricks | Posted: | Sep 5, 2019 16:41 | Subject: | Re: Help with another color | Viewed: | 28 times | Topic: | Colors | |
|
| In Colors, mmookk61 writes:
| In Colors, detroitbricks writes:
| Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
Put the set number into the list inventory button and see if there are two different
blues listed. What set is it?
|
I realized the lighting in my house in terrible, I tried for many pictures and
think this is it. The set is 3854 The Krusty Krab, and it says there is a 1x3
blue brick and the blue 1x2 jumper. Both are this weird blue and its 100% this
color even inside the brick.
|
|
|
Author: | FreeStorm | Posted: | Sep 5, 2019 15:57 | Subject: | Inside boxes from set 523-1 | Viewed: | 72 times | Topic: | Catalog | Status: | Open | |
|
| Today I received my bought set
Inside the box
There is two identical boxes with parts inside (look that funny rabbit)
Should I add these boxes as alternate picture of original box 523-1 or add as
a gear inside inventory of set 523-1 ?
-Fred
PS: maybe that box exist in catalog, but I do not find them.
|
|
|
Author: | WoutR | Posted: | Sep 5, 2019 15:39 | Subject: | Re: What year were part numbers introduced? | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog, cosmicray writes:
| In Catalog, crazylegoman writes:
| In Catalog, 1271moggy writes:
| I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
The one or two digit numbers indicate molds and mold cavities in the actual machine
that creates the parts from liquid plastic injection. As far as what year TLC
started putting part numbers on the parts themselves, I'm afraid I do not
know.
David
|
Part number such as 3001 for a 2x4 brick ? Certainly the older CA parts had that,
so it must have been in the earliest days.
Nita Rae
|
The CA parts did have mold numbers (5 04) but not the part number (3176)
|
|
Author: | WoutR | Posted: | Sep 5, 2019 15:29 | Subject: | Re: What year were part numbers introduced? | Viewed: | 33 times | Topic: | Catalog | |
|
| In Catalog, 1271moggy writes:
| I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
If I remember correctly, around 1985.
|
|
Author: | cosmicray | Posted: | Sep 5, 2019 15:27 | Subject: | Re: What year were part numbers introduced? | Viewed: | 36 times | Topic: | Catalog | |
|
| In Catalog, crazylegoman writes:
| In Catalog, 1271moggy writes:
| I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
The one or two digit numbers indicate molds and mold cavities in the actual machine
that creates the parts from liquid plastic injection. As far as what year TLC
started putting part numbers on the parts themselves, I'm afraid I do not
know.
David
|
Part number such as 3001 for a 2x4 brick ? Certainly the older CA parts had that,
so it must have been in the earliest days.
Nita Rae
|
|
Author: | crazylegoman | Posted: | Sep 5, 2019 11:37 | Subject: | Re: What year were part numbers introduced? | Viewed: | 40 times | Topic: | Catalog | |
|
| In Catalog, 1271moggy writes:
| I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
The one or two digit numbers indicate molds and mold cavities in the actual machine
that creates the parts from liquid plastic injection. As far as what year TLC
started putting part numbers on the parts themselves, I'm afraid I do not
know.
David
|
|
Author: | pikachu3 | Posted: | Sep 5, 2019 10:30 | Subject: | Re: Help with color | Viewed: | 24 times | Topic: | Colors | |
|
| In Colors, randyf writes:
| In Colors, WoutR writes:
| I have discussed copper with Admins in the past, I think it is time for an update
|
The only color that I could see a chance of getting added would be something
akin to "Metallic Gold" or "Metallic Silver" to separate surface-coated copper
parts from copper-color molded parts. Beyond that, it would be highly unlikely
to get any consensus to make further changes.
Cheers,
Randy
|
+1 for Metallic Copper
I don't know of any part that comes in more than one copper color; without
any overlap, it makes sense to keep all the pearl copper colors together here.
|
|
Author: | WoutR | Posted: | Sep 5, 2019 10:09 | Subject: | Re: Help with color | Viewed: | 34 times | Topic: | Colors | |
|
| In Colors, randyf writes:
| In Colors, WoutR writes:
| I have discussed copper with Admins in the past, I think it is time for an update
|
The only color that I could see a chance of getting added would be something
akin to "Metallic Gold" or "Metallic Silver" to separate surface-coated copper
parts from copper-color molded parts. Beyond that, it would be highly unlikely
to get any consensus to make further changes.
Cheers,
Randy
|
That would be my priority also. I think we need a Metallic Copper.
|
|
Author: | 1271moggy | Posted: | Sep 5, 2019 07:51 | Subject: | What year were part numbers introduced? | Viewed: | 96 times | Topic: | Catalog | Status: | Open | |
|
| I have just wondering if anyone knew when Lego started putting the part number
on the pieces. I have just found part 3176 which looks fairly 'new'
but has no part number. It just has the numbers 5 and 04 on the underside.
What do these numbers refer to?
Apologies if this has been asked before - I cannot find a thread.
Thanking you all
|
|
Author: | paulvdb | Posted: | Sep 5, 2019 04:02 | Subject: | Re: Inventory Change Request for Set 088-1 | Viewed: | 31 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part 3404ac02 White Turntable 4 x 4 - Old Type Complete, Faceted with Indented Base
* Add 1 Part 3404ac01 White Turntable 4 x 4 - Old Type Complete, Faceted
|
The person who inventoried the set confirmed that 3404ac01 should be in this
set. See https://www.bricklink.com/message.asp?ID=1155688
|
|
Author: | SezaR | Posted: | Sep 5, 2019 00:51 | Subject: | Re: Inventory Change Request for Set 088-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part 3404ac02 White Turntable 4 x 4 - Old Type Complete, Faceted with Indented Base
* Add 1 Part 3404ac01 White Turntable 4 x 4 - Old Type Complete, Faceted
|
https://www.bricklink.com/catalogItemInv.asp?S=088-1&viewID=Y
I have checked many sets. It appears that the turnable 3404c02 was first produced
sometime between 1974-75 and then, it was replaced by 3403c01 in 1976.
|
|
Author: | SezaR | Posted: | Sep 5, 2019 00:45 | Subject: | Inventory Change Request for Set 088-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3404ac02 White Turntable 4 x 4 - Old Type Complete, Faceted with Indented Base
* Add 1 Part 3404ac01 White Turntable 4 x 4 - Old Type Complete, Faceted
|
|
Author: | dcarmine | Posted: | Sep 4, 2019 21:29 | Subject: | Re: Help with another color | Viewed: | 32 times | Topic: | Colors | |
|
| In Colors, detroitbricks writes:
| Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
It is discolored from age. I think someone calls it "brittle blue". I have
seen this in my inventory, brand new blue bricks turned yellowish, inside and
out. I donate them to schools. Sometimes these blue parts will crack easily,
especially minifig torsos. It's not all blue parts, so some blue parts are
made with a different recipe?
Someone else talked recently that he opened a MIB set from the '90s had a
lot of blue pieces discolored.
It's a known issue, but I'm not sure if anyone knows why.
HTH
Donna
|
|
Author: | bb316892 | Posted: | Sep 4, 2019 20:22 | Subject: | Re: Help with another color | Viewed: | 28 times | Topic: | Colors | |
|
| In Colors, detroitbricks writes:
| Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
Put the set number into the list inventory button and see if there are two different
blues listed. What set is it?
|
|
Author: | iprice | Posted: | Sep 4, 2019 20:11 | Subject: | Re: Help with another color | Viewed: | 26 times | Topic: | Colors | |
|
| In Colors, detroitbricks writes:
| Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
The hinge brick is definitely blue - it only comes in one shade of blue (if I've
selcted the right product from the catalogue), so that's got to be it. The
1x3 brick just looks like dark blue to me.
TBF the blue hing brick does look darker than normal blue, but that could be
due to bad light, camera etc.
Do you have any normal blue or dark blue bricks to compare these to?
|
|
Author: | detroitbricks | Posted: | Sep 4, 2019 19:01 | Subject: | Help with another color | Viewed: | 93 times | Topic: | Colors | Status: | Open | |
|
| Ok I have ran across another color issue, I have ran across this a few times
but this time both parts came from the same used set. Assume both are blue but
1 is discolored. Does anybody sell these or do they go in the scrap bin?
|
|
|
Author: | Teup | Posted: | Sep 4, 2019 18:11 | Subject: | Re: Add "Part Out Value" Link to Set Entry Page | Viewed: | 41 times | Topic: | Suggestions | |
|
| Ah, I didn't read properly Yes, that should already cause a whole lot
less burden.
Good thing that at least the link to the part out value result page is directly
accessible and editable without having to go through the "get value" button.
That way, at least some of us that have some programming or perhaps Excel or
other skills are able to save a bunch of clicks. Seller tools aren't coming
to it seems we all have to make our own But yes, I think I agree this would
be a good feature.
In Suggestions, speshy writes:
| In this suggestion I'm suggesting a simple link at each set's page (probably
the better function would be a button). Clicking on it would provide the same
function as navigating through Market Price Guide entering the set's
number, then clicking "Get Value". It doesn't need to be information saved
on the page, but if I'm looking at a set on BL and wondering what its part
out value is, I should be able to find out quicker than taking the above steps.
K
In Suggestions, Teup writes:
| In Suggestions, speshy writes:
| I'd like to suggest that each set's "Part Out Value" be linked directly
from its Set Entry page (assuming 6 mo. value of "new" parts). It would remove
a few annoying clicks to obtain a set's part out value after browsing it
in the catalog.
Thanks,
K
|
I'm not an expert but I think this would be too heavy for the website. Even
asking 1 part out value the system needs to process all priceguide data of all
parts in that set. If a totally random user would be browsing through 10 sets,
that whole process has to happen 10 times. It's only useful for sellers and
only at those moments that they want to purchase something, so I think it would
be an overkill of constant processing on the server for a small advantage.
|
|
|
|
Author: | speshy | Posted: | Sep 4, 2019 17:11 | Subject: | Re: Add "Part Out Value" Link to Set Entry Page | Viewed: | 26 times | Topic: | Suggestions | |
|
| In this suggestion I'm suggesting a simple link at each set's page (probably
the better function would be a button). Clicking on it would provide the same
function as navigating through Market Price Guide entering the set's
number, then clicking "Get Value". It doesn't need to be information saved
on the page, but if I'm looking at a set on BL and wondering what its part
out value is, I should be able to find out quicker than taking the above steps.
K
In Suggestions, Teup writes:
| In Suggestions, speshy writes:
| I'd like to suggest that each set's "Part Out Value" be linked directly
from its Set Entry page (assuming 6 mo. value of "new" parts). It would remove
a few annoying clicks to obtain a set's part out value after browsing it
in the catalog.
Thanks,
K
|
I'm not an expert but I think this would be too heavy for the website. Even
asking 1 part out value the system needs to process all priceguide data of all
parts in that set. If a totally random user would be browsing through 10 sets,
that whole process has to happen 10 times. It's only useful for sellers and
only at those moments that they want to purchase something, so I think it would
be an overkill of constant processing on the server for a small advantage.
|
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|