BrickLink Discussion Forum

Discussion Forum

Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies

Inventory Change Request for Set 9252-2 - StormChaser (569)

Please make changes to the following inventory: (Set 9252-2) * Add 12 Part 3002old Yellow Brick 2 x 3 without Cross Supports (Alternate) (match ID 1) * Change [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Inventory Change Request for Set 31045-1 - Turribrick (6)

Please make changes to the following inventory: (Set 31045-1) * Change 1 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Re: 42082 extra items - Hygrotus (869)

[...] Thank you for finding this. Inventory of this set has been corrected. (URL)
(66 months ago, Dec 5, 2018, to Inventories)

Inventory Change Request for Set 42082-1 - Hygrotus (869)

Please make changes to the following inventory: (Set 42082-1) * Add 1 Part 3070b Trans-Clear Tile 1 x 1 with Groove (Extra) Comments from Submitter: This extra part was [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Re: Inventory Change Request for Set 107-1 - Hygrotus (869)

[...] Sorry for the long wait for conclude this request Exactly part assembly plugs with wire which you want to add to the set to replace separate entries of plugs an wire are [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Inventory Change Request for Set 60158-1 - Turribrick (6)

Please make changes to the following inventory: (Set 60158-1) * Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Inventory Change Request for Set 60192-1 - Turribrick (6)

Please make changes to the following inventory: (Set 60192-1) * Change 8 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Re: Part #30027u - Wheel 8mm D. x 9mm (for Slicks - jagaboo (3324)

Never mind!!! I figured it out...SORRY!! In Catalog, jagaboo writes: [...]
(66 months ago, Dec 5, 2018, to Catalog)

Part #30027u - Wheel 8mm D. x 9mm (for Slicks - jagaboo (3324)

Notice the image of Part 30027u, showing 3 views of the part. The bottom view of it doesn’t have any notches. All my 30027u’s look like this...no notches. Looking at the photo [...]
(66 months ago, Dec 5, 2018, to Catalog)

Inventory Change Request for Set 9252-1 - StormChaser (569)

Please make changes to the following inventory: (Set 9252-1) * Delete 4 Minifig 4224c01 Basic Figure Finger Puppet Female (bfp001) (match ID 1) * Delete 4 Minifig [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Inventory Change Request for Set 76075-1 - mjwest83 (685)

Please make changes to the following inventory: (Set 76075-1) * Add 1 Part 15068pb154L Dark Bluish Gray Slope, Curved 2 x 2 No Studs with Dark Tan Belt over Pearl Dark Gray Armor [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Re: 60592c01 - whos idea was this? - littlepb (43)

[...] I personally think that assembled hinges can be marked as new because they have not been taken apart and if a buyer wants separated parts, they can order them separately. [...]
(66 months ago, Dec 5, 2018, to Catalog)

Re: Large Macaroni tile in classic blue? - littlepb (43)

[...] I think that that's what it is
(66 months ago, Dec 5, 2018, to Catalog)

Re: 60592c01 - whos idea was this? - yorbrick (1185)

[...] I'd say used, as there is the possibility of damage when opening it. Of course, you could test it by applynig power to it, but that makes it used. There will also [...]
(66 months ago, Dec 5, 2018, to Catalog)

Re: 60592c01 - whos idea was this? - yorbrick (1185)

[...] Just to correct that, the argument about minifigures is can a seller assemble them and still call them new. There is no argument about can a minifigure be new if it is [...]
(66 months ago, Dec 5, 2018, to Catalog)

Re: 60592c01 - whos idea was this? - SylvainLS (46)

[...] Well, the definition says New should have been manipulated for sorting only. Opening isn’t sorting… unless you sort by production date ;) Now, it’s about screws, [...]
(66 months ago, Dec 5, 2018, to Catalog)

Re: Automatic price while listing items - Teup (6606)

[...] They do, but they won't do anything.
(66 months ago, Dec 5, 2018, to Suggestions)

Inventory Change Request for Set 809-1 - TakeAbricK (13474)

Please make changes to the following inventory: (Set 809-1) * Change 1 Part Red {73436 Door 1 x 4 x 5 Left - (MARKED FOR DELETION - Undetermined Glass Color Version) to [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Re: Inventory Change Request for Set 7735-1 - SezaR (1395)

[...] You are welcome. :-) It seems I ran out of photo for now! (but I will double-check) Cheers Reza [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Re: Inventory Change Request for Set 6982-1 - SezaR (1395)

[...] Based on this mistake, if you revoke all my honored points, it is fair and I don't complain :-)
(66 months ago, Dec 5, 2018, to Inventories Requests)

Re: Inventory Change Request for Set 6982-1 - SezaR (1395)

[...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Inventory Change Request for Set 6982-1 - SezaR (1395)

Please make changes to the following inventory: (Set 6982-1) * Delete 4 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium * Delete 4 Part 4624 White Wheel 8mm D. x 6mm * [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Re: Inventory Change Request for Set 6982-1 - SezaR (1395)

[...] hmmmm, that seems to be a historic mistake! :-)
(66 months ago, Dec 5, 2018, to Inventories Requests)

Re: Large Macaroni tile in classic blue? - Hygrotus (869)

[...] Isn't this part on real photo there just dark azure, but it's look like this due to lighting condition of photo?
(66 months ago, Dec 5, 2018, to Catalog)

Re: Inventory Change Request for Set 6982-1 - Hygrotus (869)

[...] You wanted to delete tire to this wheel assembly rather than plate, yes? ;-)
(66 months ago, Dec 5, 2018, to Inventories Requests)

Large Macaroni tile in classic blue? - celloguy (858)

So on the page for this part someone had photographed a macaroni tile in classic blue which isn’t in any set. Is it coming out soon? If not, maybe it should be removed? I really [...]
(66 months ago, Dec 5, 2018, to Catalog)

Re: Inventory Change Request for Set 6982-1 - SezaR (1395)

[...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Inventory Change Request for Set 6982-1 - SezaR (1395)

Please make changes to the following inventory: (Set 6982-1) * Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder * Delete 4 Part 4624 White Wheel 8mm D. [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Re: Automatic price while listing items - Andrsv (2875)

[...] I agree 100% with everything you ask for!
(66 months ago, Dec 5, 2018, to Suggestions)

Re: Inventory Change Request for Set 6604-1 - randyf (442)

[...] Set unboxing can be found here: (URL) Additional note: The helmet for (Minifigure pln051) from this set unboxing is (Part 193b2)
(66 months ago, Dec 5, 2018, to Inventories Requests)

Inventory Change Request for Set 6604-1 - randyf (442)

Please make changes to the following inventory: (Set 6604-1) * Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small * Delete 4 Part 4624 White Wheel 8mm D. x 6mm * [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Re: Inventory Change Request for Set 7735-1 - randyf (442)

OK, got it. :D By the way, thanks very much for helping me with these inventory changes. If you can find any evidence for any other sets in the 1980-1992 range that included [...]
(66 months ago, Dec 5, 2018, to Inventories Requests)

Re: 60592c01 - whos idea was this? - SezaR (1395)

[...] It has been sometime I am thinking about this one: Does opening the screws (located on the top) and removing the motor housing in order to check the production [...]
(66 months ago, Dec 5, 2018, to Catalog)

Re: 60592c01 - whos idea was this? - mhortar (813)

[...] You assembled the parts. That's literally the definition of what makes them used (previously assembled). You can't build a set and then sell it as 'new, [...]
(66 months ago, Dec 5, 2018, to Catalog)

Re: Inventory Change Request for Set 7735-1 - SezaR (1395)

[...] Randy, I have saved many photos of used, MISB, or sealed copies for various train sets from 80s and even before 80s. I got them either from their owners or from past [...]
(66 months ago, Dec 4, 2018, to Inventories Requests)

Re: Inventory Change Request for Set 6686-1 - SezaR (1395)

[...] (URL)
(66 months ago, Dec 4, 2018, to Inventories Requests)

Re: Inventory Change Request for Set 6686-1 - SezaR (1395)

[...] My copy is 66%-NIB! One bag out of three is opened (the one including (4073c01 trans-yellow) and two white printed tiles (Part 3068bp06) and (Part 3068bp50) [...]
(66 months ago, Dec 4, 2018, to Inventories Requests)

Re: Inventory Change Request for Set 7735-1 - randyf (442)

[...] Reza - Assuming that you know where the images are located on the web, could you please add hyperlinks to where you find the images in your requests? The hyperlinks [...]
(66 months ago, Dec 4, 2018, to Inventories Requests)

Inventory Change Request for Set 6686-1 - SezaR (1395)

Please make changes to the following inventory: (Set 6686-1) * Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side * Add 1 Part 4073c01 Trans-Yellow Plate, Round [...]
(66 months ago, Dec 4, 2018, to Inventories Requests)

Re: Inventory Change Request for Set 7735-1 - SezaR (1395)

[...]
(66 months ago, Dec 4, 2018, to Inventories Requests)

Inventory Change Request for Set 7735-1 - SezaR (1395)

Please make changes to the following inventory: (Set 7735-1) * Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side * Delete 6 Part 4073 Trans-Red Plate, Round 1 x [...]
(66 months ago, Dec 4, 2018, to Inventories Requests)

Re: 60592c01 - whos idea was this? - brox999 (3790)

[...] Rubbish, putting two brand new, unused parts together does not make them used. I list the assembly as new if the parts came from a sealed set
(66 months ago, Dec 4, 2018, to Catalog)

Re: Bored? I Need Help - StormChaser (569)

[...] I'll do: 2nd Section: F, G, H, I, J This only leaves the 4th and 5th sections which still need to be worked on.
(66 months ago, Dec 4, 2018, to Catalog)

Re: 40292 minifig error - randyf (442)

[...] My bad, Robert. I forgot that those sections were the "work in progress" ones. The section that I was referencing about minifigures being added to the catalog in your [...]
(66 months ago, Dec 4, 2018, to Catalog)

Re: 40292 minifig error - axaday (7303)

[...] I think you are not asking for what we ultimately want, perhaps because you are aware that it is as far as we can get without the programmers getting involved. What [...]
(66 months ago, Dec 4, 2018, to Catalog)

Re: 40292 minifig error - StormChaser (569)

[...] I need to make it clear that these are not official guidelines. I have been working on a project to rework the catalog Help Center and the page linked to above is a [...]
(66 months ago, Dec 4, 2018, to Catalog)

Re: 42082 extra items - Hygrotus (869)

[...] Yes you have right it is visible in this review (URL) Please consider submiting invetory change request here (URL) BTW Are you able to check rest of the inventory. Parts [...]
(66 months ago, Dec 4, 2018, to Inventories)

Re: 42082 extra items - xxxzanka (3)

[...] Tile not plate, sorry
(66 months ago, Dec 4, 2018, to Inventories)

42082 extra items - xxxzanka (3)

It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3 in step 8 bags, 2 used in step 8). Giancarlo
(66 months ago, Dec 4, 2018, to Inventories)

Re: 40292 minifig error - randyf (442)

[...] And that is what we refer to as the "slippery slope". :) Randy
(66 months ago, Dec 4, 2018, to Catalog)

Next Page: 5 More | 10 More | 25 More | 50 More | 100 More