Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | StormChaser  | | Posted: | Jun 18, 2018 06:05 | | Subject: | Re: Inventory Change Request for Set 926-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, eurotoyslego writes:
| | only one of each of the minifigures is included, but should be two.
|
Indeed. That's my fault and I apologize. When I made the changes back in
April I got the quantities wrong. Thank you for catching this error.
|
 |
| Author: | StormChaser | | Posted: | Jun 18, 2018 06:04 | | Subject: | Re: Inventory Change Request for Set 118-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
| In Inventories Requests, wannes. writes:
| | sorry but i don't own any at the moment. don't worry every collector
knows that these things come with a red dot
|
I would still like to see some evidence and have that evidence preserved for
those who examine this change in the future. I've looked at several scans
of catalogs from the time period and don't see the red dot in any of the
photos.
Just to be clear: I don't have any doubt that you know what you're talking
about. I'd just like to see changes to these older sets thoroughly documented.
|
|
| Author: | SezaR | | Posted: | Jun 18, 2018 02:46 | | Subject: | Re: Inventory Change Request for Set 926-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| That is true.
Are the sticker sheets exactly as
and
?
In Inventories Requests, eurotoyslego writes:
| | Please make changes to the following inventory:
* Change {1 to 2} Minifig sp064 Classic Space - Red with Airtanks, Stickered Torso Pattern (Counterpart)
* Change {1 to 2} Minifig sp063 Classic Space - White with Airtanks, Stickered Torso Pattern (Counterpart)
|
|
|
| Author: | eurotoyslego | | Posted: | Jun 18, 2018 02:28 | | Subject: | Inventory Change Request for Set 926-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {1 to 2} Minifig sp064 Classic Space - Red with Airtanks, Stickered Torso Pattern (Counterpart)
* Change {1 to 2} Minifig sp063 Classic Space - White with Airtanks, Stickered Torso Pattern (Counterpart)
|
|
| Author: | eurotoyslego | | Posted: | Jun 18, 2018 02:25 | | Subject: | Inventory Change Request for Set 926-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {1 to 2} Minifig sp127 Classic Space - Red with Airtanks, Torso Plain
* Change {1 to 2} Minifig sp128 Classic Space - White with Airtanks, Torso Plain
Comments from Submitter:
only one of each of the minifigures is included, but should be two. Verified by a sealed set
|
|
| Author: | PotterMoreBrick | | Posted: | Jun 17, 2018 18:52 | | Subject: | Inventory Change Request for Set 10218-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 15254 Light Bluish Gray Brick, Arch 1 x 6 x 2 - Medium Thick Top without Reinforced Underside (Alternate)
Comments from Submitter:
Just parted out 3 Pet Shops and all three had the 15254 arch instead of the two types already listed
|
|
| Author: | normann1974 | | Posted: | Jun 17, 2018 11:01 | | Subject: | Re: Inventory Change Request for Set 4998-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Add 2 Part 4032 Green Plate, Round 2 x 2 with Axle Hole (Alternate) (match ID 1)
* Add 1 Part 32064 Light Bluish Gray Technic, Brick 1 x 2 with Axle Hole (Alternate) (match ID 2)
* Change 2 Part Green 4032b Plate, Round 2 x 2 with Axle Hole - X Opening {match ID 0 to 1}
* Change 1 Part Light Bluish Gray 32064b Technic, Brick 1 x 2 with Axle Hole - New Style with X Opening {match ID 0 to 2}
Comments from Submitter:
These variants are in my set. Source: MISB-based set that were never mixed with other bricks.
|
|
|
|
| Author: | normann1974 | | Posted: | Jun 17, 2018 11:00 | | Subject: | Inventory Change Request for Set 4998-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 4032 Green Plate, Round 2 x 2 with Axle Hole (Alternate) (match ID 1)
* Add 1 Part 32064 Light Bluish Gray Technic, Brick 1 x 2 with Axle Hole (Alternate) (match ID 2)
* Change 2 Part Green 4032b Plate, Round 2 x 2 with Axle Hole - X Opening {match ID 0 to 1}
* Change 1 Part Light Bluish Gray 32064b Technic, Brick 1 x 2 with Axle Hole - New Style with X Opening {match ID 0 to 2}
Comments from Submitter:
These variants are in my set. Source: MISB-based set that were never mixed with other bricks.
|
| Author: | jenwick | | Posted: | Jun 17, 2018 10:13 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 36 times | | Topic: | Suggestions | |
| | Yes, this Amazon style has me greatly concerned. |
| Author: | wannes. | | Posted: | Jun 17, 2018 08:26 | | Subject: | Re: Inventory Change Request for Set 118-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, wannes. writes:
| | Battery boxes with red dot. you can also see this in the catalogs.
|
Please post a photo or scan of one or more of these appearances in catalogs showing
the red dot for future reference.
Thank you.
|
sorry but i don't own any at the moment. don't worry every collector
knows that these things come with a red dot.
|
| Author: | axaday | | Posted: | Jun 16, 2018 22:43 | | Subject: | Inventory Change Request for Set 70640-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87994 Black Bar 3L (Bar Arrow) (Extra)
* Add 1 Part 18654 Black Technic, Pin Connector Round 1L (Extra)
* Add 1 Part 18654 Flat Silver Technic, Pin Connector Round 1L (Extra)
* Add 1 Part 3713 Light Bluish Gray Technic Bush (Extra)
|
| Author: | normann1974 | | Posted: | Jun 16, 2018 16:01 | | Subject: | Inventory Change Request for Set 6752-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
My set contains this variant.
|
| Author: | StormChaser | | Posted: | Jun 16, 2018 15:59 | | Subject: | Re: Inventory Change Request for Set 118-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, wannes. writes:
| | Battery boxes with red dot. you can also see this in the catalogs.
|
Please post a photo or scan of one or more of these appearances in catalogs showing
the red dot for future reference.
Thank you.
|
|
| Author: | calsbricks | | Posted: | Jun 16, 2018 11:24 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 45 times | | Topic: | Suggestions | |
| In Suggestions, 62Bricks writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, 62Bricks writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, JulieK writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, jenwick writes:
| | In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
Of course
On the right hand side of the My Inventory page there are several options to
choose from, but one that is missing is colour. When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004. You can do this if
you use the PCC but who know those off the top of their head.
|
You can get that info from the catalog page, make sure the color info tab is
clicked.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3004&idColor=10#T=C&C=10
|
Thanks but we already knew that and it isn't what we want. When you search
your inventory you should be able to do the same as you can when you are within
your store. Choose a part no and a condition and a colour. The only way this
can be done currently is via a PCC and a condition filter.
Hope I have now made that clearer.
|
The issue is that although the search option is labeled "Catalog Name and Number"
it is actually Catalog Name OR Number." BL has the part numbers and part names
in separate fields and it does not search them both at once. If you include a
part number in the search terms it defaults to a part number search and ignores
the other keywords.
So if you search for [3004 dark green] it only searcesh on 3004 and ignores the
"dark green," so it shows you all your 3004s.
To search by color and part, do not search on the part number but use
the part name. Try searching your inventory with "any part of field" selected
for [dark green 1x2 brick] and you should get the results you expect.
|
That does work your Goatleg knowledge of how it works is useful. Having said
that not many people would be aware of that and it still would be easier to do
it the way we suggested.
At the end of the day it is not a significant programming change to alter the
query by form using colour as a 'where' statement, especially if there
are separate fields in the database.
|
Well the color information is actually in two places - in the color field as
well as in the name - and like the part number search, it will default to searching
the color field if you search only for a color name. Try an inventory keyword
search for [dark green] and you'll get nothing, because it tries to do a
color search but the color field is not included in the query.
I assume the somewhat crippled nature of the search function was meant to reduce
the load and improve response time on Bricklink's original servers. Searching
three fields at once was maybe more than it could handle in a reasonable amount
of time. Capabilities have advanced considerably.
|
Yes things have moved on and now with the announcement from Brickworld it looks
like it doesn't matter anyway cause we will be another Amazon if the CEO
has his way. If we wanted to sell on Amazon we would open on Amazon. (It is a
hopeless site anyway with excessive fees, the worst customer service on record
and despite his billions prone to dramatic and total flop decisions). He got
some right after the disastorous start which made him very wealthy - now he dabbles,
pays his employees peanuts and has 10 recent flops with the tangent decisions
he has made - but at least he can afford them.
|
|
|
| Author: | 62Bricks | | Posted: | Jun 16, 2018 11:09 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 31 times | | Topic: | Suggestions | |
| In Suggestions, calsbricks writes:
| | In Suggestions, 62Bricks writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, JulieK writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, jenwick writes:
| | In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
Of course
On the right hand side of the My Inventory page there are several options to
choose from, but one that is missing is colour. When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004. You can do this if
you use the PCC but who know those off the top of their head.
|
You can get that info from the catalog page, make sure the color info tab is
clicked.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3004&idColor=10#T=C&C=10
|
Thanks but we already knew that and it isn't what we want. When you search
your inventory you should be able to do the same as you can when you are within
your store. Choose a part no and a condition and a colour. The only way this
can be done currently is via a PCC and a condition filter.
Hope I have now made that clearer.
|
The issue is that although the search option is labeled "Catalog Name and Number"
it is actually Catalog Name OR Number." BL has the part numbers and part names
in separate fields and it does not search them both at once. If you include a
part number in the search terms it defaults to a part number search and ignores
the other keywords.
So if you search for [3004 dark green] it only searcesh on 3004 and ignores the
"dark green," so it shows you all your 3004s.
To search by color and part, do not search on the part number but use
the part name. Try searching your inventory with "any part of field" selected
for [dark green 1x2 brick] and you should get the results you expect.
|
That does work your Goatleg knowledge of how it works is useful. Having said
that not many people would be aware of that and it still would be easier to do
it the way we suggested.
At the end of the day it is not a significant programming change to alter the
query by form using colour as a 'where' statement, especially if there
are separate fields in the database.
|
Well the color information is actually in two places - in the color field as
well as in the name - and like the part number search, it will default to searching
the color field if you search only for a color name. Try an inventory keyword
search for [dark green] and you'll get nothing, because it tries to do a
color search but the color field is not included in the query.
I assume the somewhat crippled nature of the search function was meant to reduce
the load and improve response time on Bricklink's original servers. Searching
three fields at once was maybe more than it could handle in a reasonable amount
of time. Capabilities have advanced considerably.
|
|
| Author: | calsbricks | | Posted: | Jun 16, 2018 10:51 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 27 times | | Topic: | Suggestions | |
| In Suggestions, 62Bricks writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, JulieK writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, jenwick writes:
| | In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
Of course
On the right hand side of the My Inventory page there are several options to
choose from, but one that is missing is colour. When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004. You can do this if
you use the PCC but who know those off the top of their head.
|
You can get that info from the catalog page, make sure the color info tab is
clicked.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3004&idColor=10#T=C&C=10
|
Thanks but we already knew that and it isn't what we want. When you search
your inventory you should be able to do the same as you can when you are within
your store. Choose a part no and a condition and a colour. The only way this
can be done currently is via a PCC and a condition filter.
Hope I have now made that clearer.
|
The issue is that although the search option is labeled "Catalog Name and Number"
it is actually Catalog Name OR Number." BL has the part numbers and part names
in separate fields and it does not search them both at once. If you include a
part number in the search terms it defaults to a part number search and ignores
the other keywords.
So if you search for [3004 dark green] it only searcesh on 3004 and ignores the
"dark green," so it shows you all your 3004s.
To search by color and part, do not search on the part number but use
the part name. Try searching your inventory with "any part of field" selected
for [dark green 1x2 brick] and you should get the results you expect.
|
That does work your Goatleg knowledge of how it works is useful. Having said
that not many people would be aware of that and it still would be easier to do
it the way we suggested.
At the end of the day it is not a significant programming change to alter the
query by form using colour as a 'where' statement, especially if there
are separate fields in the database.
|
|
| Author: | 62Bricks | | Posted: | Jun 16, 2018 10:45 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 40 times | | Topic: | Suggestions | |
| In Suggestions, calsbricks writes:
| | In Suggestions, JulieK writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, jenwick writes:
| | In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
Of course
On the right hand side of the My Inventory page there are several options to
choose from, but one that is missing is colour. When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004. You can do this if
you use the PCC but who know those off the top of their head.
|
You can get that info from the catalog page, make sure the color info tab is
clicked.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3004&idColor=10#T=C&C=10
|
Thanks but we already knew that and it isn't what we want. When you search
your inventory you should be able to do the same as you can when you are within
your store. Choose a part no and a condition and a colour. The only way this
can be done currently is via a PCC and a condition filter.
Hope I have now made that clearer.
|
The issue is that although the search option is labeled "Catalog Name and Number"
it is actually Catalog Name OR Number." BL has the part numbers and part names
in separate fields and it does not search them both at once. If you include a
part number in the search terms it defaults to a part number search and ignores
the other keywords.
So if you search for [3004 dark green] it only searcesh on 3004 and ignores the
"dark green," so it shows you all your 3004s.
To search by color and part, do not search on the part number but use
the part name. Try searching your inventory with "any part of field" selected
for [dark green 1x2 brick] and you should get the results you expect.
|
|
| Author: | calsbricks | | Posted: | Jun 16, 2018 10:20 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 39 times | | Topic: | Suggestions | |
| In Suggestions, jenwick writes:
| | OK, I understand the color part and totally agree. Now can you explain point 2
|
We seem to be having a two person dialogue on this but, sadly that is what happens
to lots of suggestions, both good and bad.
Currently when you go to the My Inventory page, you see below:
What we would like to see is a sub-total line entered below each major category
e.g. sets; parts, minfigures etc. showing the totals for lots, items and value
and then at the bottom of this we would like a summary which would read something
like this (Not real figures, of course)
On the summary you might want to see the % breakdown on lots, items or value
so this should be 'choosable'
It took ma few minutes to do that so you could image how long it would really
take up if you had to constantly add up numbers. All of which computers are here
for.
|
|
|
| Author: | jenwick | | Posted: | Jun 16, 2018 09:54 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 38 times | | Topic: | Suggestions | |
| OK, I understand the color part and totally agree. Now can you explain point
2?
|
| Author: | shungabubus | | Posted: | Jun 15, 2018 18:04 | | Subject: | Re: Price Guide Filter on Qty | | Viewed: | 36 times | | Topic: | Suggestions | |
| Hello,
That can do the trick, thanks, but I'd still prefer the original idea. 
Thanks:
Tamas
|
| Author: | Bionicleseller | | Posted: | Jun 15, 2018 15:12 | | Subject: | Re: Classic Wanted List Unavailable on June 5th | | Viewed: | 133 times | | Topic: | Suggestions | |
| In Administrative, SylvainLS writes:
| | In Administrative, Bionicleseller writes:
| | […]
Remember, if we
cannot figure it out, imagine what it must be like for newcomers?
|
Remember they are not hampered as you are by your knowledge of the olden ways.
|
They will be worse off than we are because they have absolutely no idea what
it is capable of. At least we know what the wanted list can do. They
don't and what it's really doing is costing all of us sales.
*Thanks for the grammar correction*
|
|
| Author: | wannes. | | Posted: | Jun 15, 2018 14:30 | | Subject: | Inventory Change Request for Set 118-1 | | Viewed: | 39 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {bb45c01 Electric 4.5V Battery Box 6 x 11 x 3 Type I Complete Assembly for 1-Prong Connectors (Old Type) to bb45c01pb01 Electric 4.5V Battery Box 6 x 11 x 3 Type I Complete Assembly for 1-Prong Connectors with Red Dot Pattern (Set 118)}
* Change 1 Part Black {bb45c02 Electric 4.5V Battery Box 6 x 11 x 3 Type II Complete Assembly for 1-Prong & 2-Prong Connectors to bb45c02pb01 Electric 4.5V Battery Box 6 x 11 x 3 Type II Complete Assembly for 1-Prong & 2-Prong Connectors with Red Dot Pattern (Set 138)} (Alternate)
Comments from Submitter:
For proof look at the pictures of the listed sets. they all have Battery boxes with red dot. you can also see this in the catalogs.
|
|
| Author: | axaday | | Posted: | Jun 15, 2018 11:08 | | Subject: | Re: Inventory Change Request for Set 75172-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
| In Inventories Requests, lecentor writes:
| | I have 2 pieces 4085d in my sealed bags. Bizarre that there are differences between
several sets
|
It really isn't. The sets get made in different factories and Lego does
not regard 4085b and 4085d as different pieces.
|
| Author: | AiBL | | Posted: | Jun 15, 2018 11:06 | | Subject: | Inventory Change Request for Set 70641-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 50860c08 Dark Purple Motorcycle Dirt Bike, Complete Assembly with Black Chassis and Red Wheels (70641) (Counterpart)
|
| Author: | axaday | | Posted: | Jun 15, 2018 11:06 | | Subject: | Re: Inventory Change Request for Part Carn01 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| | Please make changes to the following inventory:
* Add 1 Part 98061c01pb06 Medium Dark Flesh Dino Leg Large (Rear) Tyrannosaurus rex with Pin, Black Claws and Dark Brown and Orange Spots over Reddish Brown Pattern - Left
|
It isn't letting me add the tail.
|
| Author: | axaday | | Posted: | Jun 15, 2018 11:04 | | Subject: | Inventory Change Request for Part Carn01 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 98061c01pb06 Medium Dark Flesh Dino Leg Large (Rear) Tyrannosaurus rex with Pin, Black Claws and Dark Brown and Orange Spots over Reddish Brown Pattern - Left
|
|
|
| Author: | bb798663 | | Posted: | Jun 15, 2018 10:29 | | Subject: | Re: Inventory Change Request for Set 75172-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, lecentor writes:
| | Please make changes to the following inventory:
* Delete 2 Part 4085b Yellow Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (match ID 2)
* Add 2 Part 4085d Yellow Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip)
Comments from Submitter:
The pieces in the set are 4085d yellow and not 4085b
|
BTW d variant is already in inventory as alternate.
|
I have 2 pieces 4085d in my sealed bags. Bizarre that there are differences between
several sets
|
|
| Author: | shungabubus | | Posted: | Jun 15, 2018 09:15 | | Subject: | Price Guide Filter on Qty | | Viewed: | 75 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| Hello All,
I wonder why I can't set a filter on QTY for the Price Guide. I wonder how
relevant is that when I seek for 200 bricks (3001 black) that there is someone
who is selling 1 piece for HUF 9.69 when I actually can only buy from the guy
sells for HUF 43.74 due to lot size.
Not to mention the shipping costs...
Cheers:
Tamas
|
|
| Author: | Hygrotus | | Posted: | Jun 15, 2018 09:06 | | Subject: | Re: Inventory Change Request for Set 75172-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
| In Inventories Requests, lecentor writes:
| | Please make changes to the following inventory:
* Delete 2 Part 4085b Yellow Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (match ID 2)
* Add 2 Part 4085d Yellow Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip)
Comments from Submitter:
The pieces in the set are 4085d yellow and not 4085b
|
BTW d variant is already in inventory as alternate.
|
|
| Author: | Hygrotus | | Posted: | Jun 15, 2018 08:52 | | Subject: | Re: Inventory Change Request for Set 75172-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, lecentor writes:
| | Please make changes to the following inventory:
* Delete 2 Part 4085b Yellow Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (match ID 2)
* Add 2 Part 4085d Yellow Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip)
Comments from Submitter:
The pieces in the set are 4085d yellow and not 4085b
|
I inventoried it from sealed set contents and I assure you that in my set was
b version of yellow 4085, but I know it looks strange because this part was d
version in DBG color in the same set.
Let the inventory administrator judge this case  
|
Base on the explanation from inventory submiter I reject this change request.
Marek
|
|
| Author: | Hygrotus | | Posted: | Jun 15, 2018 08:44 | | Subject: | Re: Inventory Change Request for Set 75172-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, lecentor writes:
| | Please make changes to the following inventory:
* Delete 2 Part 4085b Yellow Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (match ID 2)
* Add 2 Part 4085d Yellow Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip)
Comments from Submitter:
The pieces in the set are 4085d yellow and not 4085b
|
I inventoried it from sealed set contents and I assure you that in my set was
b version of yellow 4085, but I know it looks strange because this part was d
version in DBG color in the same set.
Let the inventory administrator judge this case
|
|
| Author: | bb798663 | | Posted: | Jun 15, 2018 08:31 | | Subject: | Inventory Change Request for Set 75172-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4085b Yellow Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (match ID 2)
* Add 2 Part 4085d Yellow Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip)
Comments from Submitter:
The pieces in the set are 4085d yellow and not 4085b
|
|
| Author: | StormChaser | | Posted: | Jun 15, 2018 06:02 | | Subject: | Re: Inventory Change Request for Set 6292-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
| In Inventories Requests, msist3 writes:
| | Please make changes to the following inventory:
* Change {3 to 2} Part Green 3023 Plate 1 x 2
Comments from Submitter:
Only the two on the last instruction page of the second island part are needed for the build
|
It's easy to miss, isn't it? I had to look through 6278 once and 6292
twice before I found it. The third part (actually, the first) is added in step
19 (see attached image) and this request was not approved.
|
|
|
| Author: | bb699077 | | Posted: | Jun 14, 2018 19:31 | | Subject: | Re: Set inventory based on individual builds | | Viewed: | 43 times | | Topic: | Suggestions | |
| I see it, not the implementation I meant but it's a start, just need them
all on the same set page, rather than each build having its own page meaning
a set split over X amount of pages, that is unless the parent set (ie the actual
set number) hyperlinks to each individual page with a new tab (similar to the
Instructions tab) titled "Builds" or similar.
If it needs community manpower to split out each build then I'd get onboard
with it.
In Suggestions, yorbrick writes:
|
|
| Author: | msist3 | | Posted: | Jun 14, 2018 16:58 | | Subject: | Inventory Change Request for Set 6292-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {3 to 2} Part Green 3023 Plate 1 x 2
Comments from Submitter:
Only the two on the last instruction page of the second island part are needed for the build
|
|
| Author: | JulieK | | Posted: | Jun 14, 2018 13:35 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 43 times | | Topic: | Suggestions | |
| In Suggestions, calsbricks writes:
| | In Suggestions, JulieK writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, jenwick writes:
| | In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
Of course
On the right hand side of the My Inventory page there are several options to
choose from, but one that is missing is colour. When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004. You can do this if
you use the PCC but who know those off the top of their head.
|
You can get that info from the catalog page, make sure the color info tab is
clicked.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3004&idColor=10#T=C&C=10
|
Thanks but we already knew that and it isn't what we want. When you search
your inventory you should be able to do the same as you can when you are within
your store. Choose a part no and a condition and a colour. The only way this
can be done currently is via a PCC and a condition filter.
Hope I have now made that clearer.
|
ok, I misunderstood. "When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004."thanks for clarifying.
|
|
| Author: | calsbricks | | Posted: | Jun 14, 2018 13:32 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 34 times | | Topic: | Suggestions | |
| In Suggestions, calsbricks writes:
| | In Suggestions, JulieK writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, jenwick writes:
| | In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
Of course
On the right hand side of the My Inventory page there are several options to
choose from, but one that is missing is colour. When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004. You can do this if
you use the PCC but who know those off the top of their head.
|
You can get that info from the catalog page, make sure the color info tab is
clicked.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3004&idColor=10#T=C&C=10
|
Thanks but we already knew that and it isn't what we want. When you search
your inventory you should be able to do the same as you can when you are within
your store. Choose a part no and a condition and a colour. The only way this
can be done currently is via a PCC and a condition filter.
Hope I have now made that clearer.
|
One more thing. Everyone knows that behind Bricklink there is a SQL database.
The My inventory page is a query by form (in effect) - that means there is little
if any programming to add the colour filter and writing the code to provide sub
totals and a summary might take half an hour, at most. They already provide a
summary at the bottom of each inventory and although that should be improved
(similar to what Brickset provide) at least the idea exists somewhere.
So many little things that could make the site more helpful.
These are simple things which would make it easier for store owners, most of
whom do these types of things offline because they are not available through
the site. Part of sellers tools ? I don't believe anyone knows as these have
yet to be defined. Perhaps that will be in the new roadmap announcement being
made at Brickworld.
|
|
| Author: | calsbricks | | Posted: | Jun 14, 2018 13:23 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 44 times | | Topic: | Suggestions | |
| In Suggestions, JulieK writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, jenwick writes:
| | In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
Of course
On the right hand side of the My Inventory page there are several options to
choose from, but one that is missing is colour. When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004. You can do this if
you use the PCC but who know those off the top of their head.
|
You can get that info from the catalog page, make sure the color info tab is
clicked.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3004&idColor=10#T=C&C=10
|
Thanks but we already knew that and it isn't what we want. When you search
your inventory you should be able to do the same as you can when you are within
your store. Choose a part no and a condition and a colour. The only way this
can be done currently is via a PCC and a condition filter.
Hope I have now made that clearer.
|
|
| Author: | calsbricks | | Posted: | Jun 14, 2018 13:21 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 38 times | | Topic: | Suggestions | |
| In Suggestions, calsbricks writes:
| | In Suggestions, jenwick writes:
| | In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
Of course
On the right hand side of the My Inventory page there are several options to
choose from, but one that is missing is colour. When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004. You can do this if
you use the PCC but who know those off the top of their head.
On the sub totals when you see your inventory by category it is a simple list
broken by Sets, Parts etc. Rather than having to add up all the totals of lots,
items and value manually, it would be better if they were sub totalled so at
a glance I could see how many of each mainline category we have at any time.
Hoppe that makes it clearer if not let me know and I will put together some screen
shots of how we think it should look for easier use.
|
See below two very crude attachments - the first shows where we would like the
colour filter and the 2nd shows a small cut-out of the left hand side of the
MY inventory screen where your inventory is shown by category. We would like
subtotals after each main break e.g. sets, parts, minifigures, etc.
A summary at the bottom would be nice so at a glance you can see how your inventory
is broken down e.g.
Lots Items Value % of total
Sets xxxx xxxx xxxx
Parts xxxx xxxx xxxx
Minfigures xxxx xxxx xxxx
Again, at a glance one could tell a good deal more about your inventory from
this simple calculation.
|
|
|
| Author: | JulieK | | Posted: | Jun 14, 2018 13:17 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 51 times | | Topic: | Suggestions | |
| In Suggestions, calsbricks writes:
| | In Suggestions, jenwick writes:
| | In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
Of course
On the right hand side of the My Inventory page there are several options to
choose from, but one that is missing is colour. When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004. You can do this if
you use the PCC but who know those off the top of their head.
|
You can get that info from the catalog page, make sure the color info tab is
clicked.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=3004&idColor=10#T=C&C=10
|
|
|
| Author: | calsbricks | | Posted: | Jun 14, 2018 12:53 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 43 times | | Topic: | Suggestions | |
| In Suggestions, jenwick writes:
| | In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
Of course
On the right hand side of the My Inventory page there are several options to
choose from, but one that is missing is colour. When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004. You can do this if
you use the PCC but who know those off the top of their head.
On the sub totals when you see your inventory by category it is a simple list
broken by Sets, Parts etc. Rather than having to add up all the totals of lots,
items and value manually, it would be better if they were sub totalled so at
a glance I could see how many of each mainline category we have at any time.
Hoppe that makes it clearer if not let me know and I will put together some screen
shots of how we think it should look for easier use.
|
|
| Author: | jenwick | | Posted: | Jun 14, 2018 12:31 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 37 times | | Topic: | Suggestions | |
| In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
|
| Author: | SezaR | | Posted: | Jun 14, 2018 04:46 | | Subject: | Re: Inventory Change Request for Set 7735-1 | | Viewed: | 48 times | | Topic: | Inventories Requests | |
| Was this convincing?
Quiz: in each photo, what type the train weights are?
In Inventories Requests, SezaR writes:
| | Actually I know one MISB 7735 that is still for sale on Ebay. The problem is
that I have asked the seller special photos few times using various accounts.
If I request him another photo of the trian weights, he would easily suspect
something is wrong and then would likely call the police Interpol!
I know that his copy comes with motor type 4 (1989-90) and special curved conducting
rails 2931a (1988-90). We cannot read the Lego logos in any stud but we can see
that there is no difference in the way they appear in the photo. So they should
be of type 2. (photos 7-8)
I took many photos of my train weights.(photos 1-6) The two left ones are of
type 1 and the two right ones of type 2. Note that
1) In each photo, either I changed the angle of camera or the angle of my desk
lamp.
2) These are ALL photos I took. I changed zoomed them in and then resized them.
I think they are very convincing, specially the 6th one.
3) The Lego logo cannot be distinguished in my photos neither.
P.S. Did Dan considere a special prize (like the whole new Lego sets released
in one year) for the most technical (aka the most weird) support?
In Inventories Requests, SezaR writes:
| | This is why we should consider the discussion on probabilistic method. I just
didn't have time to provide a complete answer.
https://www.bricklink.com/message.asp?ID=1091380
But again, that is as reliable as other reliable methods (if used wisely: for
only rare parts, not on bricks,...) Indeed it can be even more reliable depending
on the case.
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, lego.12vtrains writes:
| | Here below 2 pictures of another second hand set with part 73090b.
|
There is no need to post photos of used sets, since I give this evidence almost
no weight when considering whether to approve or reject change requests.
Unless, that is, you are the original owner of the used set, you have owned it
since it was brand new from a sealed box, and you are very confident that it
has not been modified or mixed with other sets.
|
|
|
|
|
|
| Author: | SezaR | | Posted: | Jun 14, 2018 04:29 | | Subject: | Re: Inventory Change Request for Set 7745-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
| While checking a catalog of 1988, I saw something interesting. The photos attached
are taken from pages 21-23.
https://worldbricks.com/en/catalog-year/1980/catalogs-1988/1988-lego-catalog-2-en-fr-nl.html
In Inventories Requests, SezaR writes:
| | Concerning the hinges, I believe:
1) the inventory of the vintage trains were never made by checking a sealed set
as all the mistakes or incompleteness are those not found on instructions or
box. So I believe the hinges with solid stud was not verified to be included
in a copy of this set.
2) The motor is of type 3 dated 45 4 (45th week in 1984). This set is from 1985-90
so this copy should be from the first production run of this set.
Other parts included in this MISB set confirm this, for example the part
does not have reinforcements. In 1985 this part was improved and reinforcements
were added under the notches. Also
So in this first production run, the hinges are already of hollow studs.
3) As we don't have any proof that the old variants of hinges came in any
release, I requested to delete them.
More conservative option is to change them to alternate parts. Even if the old
variants of hinges were included, that would be in less than 1% copies of this
set so it makes sense to change them to alternate.
In the photos we can see most hinges. The owner of this set checked and confirmed
that all hinges were of hollow studs.
In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 5 Part 3003 Black Brick 2 x 2
* Add 5 Part 3003old Black Brick 2 x 2 without Inside Supports
* Delete 7 Part 3003 White Brick 2 x 2
* Add 7 Part 3003old White Brick 2 x 2 without Inside Supports
* Delete 2 Part 3002 Red Brick 2 x 3
* Add 2 Part 3002old Red Brick 2 x 3 without Cross Supports
* Add 1 Part 117983a (Not Applicable) Paper, Information Note, Special Suppressor Rail - 117983 (match ID 7)
* Add 1 Part 3241c (Not Applicable) Train, Track 12V Conducting Rail Curved, interference-free (match ID 7)
* Delete 2 Part 4276a Black Hinge Plate 1 x 2 with 2 Fingers and Solid Studs (match ID 1)
* Delete 2 Part 4275a Black Hinge Plate 1 x 2 with 3 Fingers and Solid Studs (match ID 2)
* Delete 2 Part 4276a Light Gray Hinge Plate 1 x 2 with 2 Fingers and Solid Studs (match ID 3)
* Delete 4 Part 4275a Light Gray Hinge Plate 1 x 2 with 3 Fingers and Solid Studs (match ID 4)
* Change 1 Part (Not Applicable) 117983b Paper, Information Note, Special Suppressor Rail with Wire and Connector - 117983 {Regular to Alternate} {match ID 0 to 7}
* Change 1 Part Light Gray 2731a Train, Track 12V Conducting Rail Curved with Connection Wire and Short Connector {Regular to Alternate} {match ID 0 to 7}
* Change 2 Part Black 4276 Hinge Plate 1 x 2 with 2 Fingers {Alternate to Regular}
* Change 2 Part Black 4275 Hinge Plate 1 x 2 with 3 Fingers {Alternate to Regular}
* Change 2 Part Light Gray 4276 Hinge Plate 1 x 2 with 2 Fingers {Alternate to Regular}
* Change 4 Part Light Gray 4275 Hinge Plate 1 x 2 with 3 Fingers {Alternate to Regular}
|
|
|
|
|
| Author: | StormChaser | | Posted: | Jun 13, 2018 07:23 | | Subject: | Re: Inventory Change Request for Set 40291-1 | | Viewed: | 31 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Fast_Bricks writes:
| | I didn't order anything, this is the first time I have been on here for at
least 2 months
|
Thank you for sharing this insight into the inventory of set 40291-1.
|
| Author: | bb869655 | | Posted: | Jun 13, 2018 07:12 | | Subject: | Re: Inventory Change Request for Set 40291-1 | | Viewed: | 36 times | | Topic: | Inventories Requests | |
| I didn't order anything, this is the first time I have been on here for at
least 2 months
|
|
| Author: | StormChaser | | Posted: | Jun 13, 2018 06:15 | | Subject: | Re: Inventory Change Request for Set 40291-1 | | Viewed: | 31 times | | Topic: | Inventories Requests | |
| In Inventories Requests, ralfklumb writes:
| | Please make changes to the following inventory:
* Add 2 Part 92946 White Slope 45 2 x 1 with 2/3 Cutout
Comments from Submitter:
In my set I had 2 of 92946 in white, one used in the build, one spare.
|
Did you cancel your request? I see it is no longer pending and it does not appear
to have been either approved or denied.
This part has never before been included in a set as an extra, but I was willing
to consider the possibility that this was the first instance. My copy of the
set, BTW, did not include the part as an extra. I have attached photos from
my set of the relevant bag still sealed and the complete contents of the bag.
|
|
|
| Author: | StormChaser | | Posted: | Jun 12, 2018 17:41 | | Subject: | Re: Inventory Change Request for Set 70920-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, wielklem writes:
| | Please make changes to the following inventory:
* Delete 1 Part 57539 Flat Silver Hose, Flexible Ribbed with 8mm Ends, 19L (Extra)
Comments from Submitter:
i have 2 sets parted out and that item does not come as an extra
|
Please see the section titled Additional Information About Extra Parts on this
page:
https://www.bricklink.com/help.asp?helpID=1562
While your sets did not include this part as an extra, other sets do. This request
was not approved.
|
|
| Author: | calsbricks | | Posted: | Jun 12, 2018 07:58 | | Subject: | Improvements needed on My Inventory Page | | Viewed: | 99 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
It would also be a good idea to incorporate the ability to update selected inventory
items into a superlot.
In addition, whilst you can use external tools to work on pricing it would be
far better if that type of tool existed on the MY Inventory page.
We are aware there has been discussion over sellers tools since 2013, and these
things may or may not be in those new tools, however it is now 5 years since
that discussion began and to date, I am not sure anyone is aware of what may
or may not be coming.
We are led to believe that Admin_Jaclyn is project managing the sellers tools
- Could we have an indication as to what is being considered, please?
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
)
)
)
)
)
