Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | da_old_builder  | | Posted: | Apr 16, 2018 21:28 | | Subject: | Inventory Change Request for Minifig cty789 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory: [M=cty789]
* Add 1 Minifig cty789 City Jungle Scientist - White Lab Coat with Test Tubes, Dark Blue Legs, Black Smooth Hair (60157)
Comments from Submitter:
Please add the weight of this Minifig. It's not eligible for instant checkout.
Thanks in advance.
|
 |
| Author: | bb307266 | | Posted: | Apr 16, 2018 21:00 | | Subject: | Inventory Change Request for Set 6557-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 30079 Orange Panel 3 x 3 x 3 Corner Convex (Divers) (Counterpart)
Comments from Submitter:
there are 2 yellow sub pieces with the 557 sticker on it. It is not here listed as a part
|
|
| Author: | Coulee_Bricks | | Posted: | Apr 16, 2018 18:05 | | Subject: | Inventory Change Request for Set 10402-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 59230 Black Arm Mechanical, Straight with Clips at 90 degrees (Vertical Grip) (Extra)
* Add 1 Part 48729b Black Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Extra)
* Add 1 Part 3024 Blue Plate 1 x 1 (Extra)
* Add 1 Part 98138pb010 Flat Silver Tile, Round 1 x 1 with Gauge with Red Pointer Pattern (Extra)
* Add 1 Part 64567 Light Bluish Gray Minifig, Weapon Lightsaber Hilt Straight (Extra)
* Add 1 Part 98138 Light Bluish Gray Tile, Round 1 x 1 (Extra)
* Add 1 Part 3024 Orange Plate 1 x 1 (Extra)
* Add 1 Part 20482 Pearl Gold Tile, Round 1 x 1 with Bar and Pin Holder (Extra)
* Add 1 Part 4592c02 Red Lever Small Base with Black Lever (Extra)
* Add 1 Part 4073 Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 25269 Red Tile, Round 1 x 1 Quarter (Extra)
* Add 1 Part 4073 Trans-Bright Green Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 White Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 98138pb027 White Tile, Round 1 x 1 with Black Eye with Pupil Partially Closed Pattern (Extra)
Comments from Submitter:
Updated inventory for the "Extra" parts included with set. I opened 3 sets, and they were all identical with these updates.
|
|
| Author: | TedNFlitsBricks | | Posted: | Apr 16, 2018 01:16 | | Subject: | Inventory Change Request for Set 21310-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 60623pb06 Reddish Brown Door 1 x 4 x 6 with 4 Panes and Stud Handle with 'GONE FISHIN'' Pattern (Sticker) - Set 21310 (Counterpart)
* Add 1 Part 60623pb07 Reddish Brown Door 1 x 4 x 6 with 4 Panes and Stud Handle with 'OPEN' Pattern (Sticker) - Set 21310 (Counterpart)
* Add 1 Part 60603pb008 Trans-Clear Glass for Window 1 x 4 x 3 - Opening with Newspaper 'The Conspirator' Pattern (Sticker) - Set 21310 (Counterpart)
* Add 1 Part 3068bpb1150 White Tile 2 x 2 with 'OPENING TIMES' Pattern (Sticker) - Set 21310 (Counterpart)
* Add 1 Part 26603pb018 Dark Bluish Gray Tile 2 x 3 with 'BOAT Rentals' Pattern (Sticker) - Set 21310 (Counterpart)
* Add 1 Part 87079pb480 Dark Bluish Gray Tile 2 x 4 with Scratches and Screws Pattern (Sticker) - Set 21310 (Counterpart)
* Add 1 Part 87079pb479 Dark Bluish Gray Tile 2 x 4 with Scratches and Worn Plates Pattern (Sticker) - Set 21310 (Counterpart)
* Add 1 Part 30350bpb067 Medium Dark Flesh Tile, Modified 2 x 3 with 2 Clips with Wood Grain and 4 Nails Pattern (Sticker) - Set 21310 (Counterpart)
* Add 1 Part 30350bpb068 Medium Dark Flesh Tile, Modified 2 x 3 with 2 Clips with Worn Plate Pattern (Sticker) - Set 21310 (Counterpart)
* Add 1 Part 30350bpb069 Reddish Brown Tile, Modified 2 x 3 with 2 Clips with Worn Plates Pattern (Sticker) - Set 21310 (Counterpart)
|
|
| Author: | TedNFlitsBricks | | Posted: | Apr 16, 2018 00:50 | | Subject: | Inventory Change Request for Set 21310-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3245cpb072 Light Bluish Gray Brick 1 x 2 x 2 with Inside Stud Holder with Newspaper 'Fish Tales' Pattern (Sticker) - Set 21310 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Apr 15, 2018 14:53 | | Subject: | Inventory Change Request for Set 40279-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Metallic Gold to Pearl Gold} 52 Rock 1 x 1 Crystal 5 Point
Comments from Submitter:
Finally found the instruction for this set. PCC for this part is 6174085 in the instruction, so it is Pearl Gold not Metallic Gold.
|
|
| Author: | bb1127331 | | Posted: | Apr 15, 2018 11:12 | | Subject: | Re: Inventory Change Request for Set 60167-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, L.tide writes:
| | Please make changes to the following inventory:
* Change 1 Part Red 15391c01 Minifig, Weapon Gun, Mini Blaster / Shooter with Dark Bluish Gray Trigger (15391 / 15392) {Regular to Counterpart}
Comments from Submitter:
15391-RED + 15392-DBG will be added separately as regular. no
|
|
|
| Author: | Hygrotus | | Posted: | Apr 15, 2018 10:33 | | Subject: | Re: Inventory Change Request for Set 60167-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, L.tide writes:
| | Please make changes to the following inventory:
* Change 1 Part Red 15391c01 Minifig, Weapon Gun, Mini Blaster / Shooter with Dark Bluish Gray Trigger (15391 / 15392) {Regular to Counterpart}
Comments from Submitter:
15391-RED + 15392-DBG will be added separately as regular.
|
No because in this particular set this part come already as complete assembly,
so that is why is in regular section as one. This is only happen in City sets.
Similar situation is with this part
See also this video in 1:08 min you can clearly see this part assembly in the
bag
https://www.youtube.com/watch?v=8MNExzXy6FU
Request will be rejected.
Marek
|
|
| Author: | L.tide | | Posted: | Apr 15, 2018 10:13 | | Subject: | Inventory Change Request for Set 60167-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Red 15391c01 Minifig, Weapon Gun, Mini Blaster / Shooter with Dark Bluish Gray Trigger (15391 / 15392) {Regular to Counterpart}
Comments from Submitter:
15391-RED + 15392-DBG will be added separately as regular.
|
|
| Author: | SezaR | | Posted: | Apr 15, 2018 09:17 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| I asked again the Swedish train collector. He confirmed that there are 5 black
legs in his set. His set was not sealed. But he bought it, together with 725
in an excellent condition. Looks to them like the parts were never touched.
My suggestion is to leave it with 5 legs as it is based on instructions. If a
6th leg should be included, then we would need a better evidence.
Correcting vintage sets is sometimes too difficult. I think I need to find a
time travel machine and then travel to the past, discuss with some managers of
TLG and get some help from them.
In Inventories Requests, peterab writes:
| | In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
Those photos actually show six legs. Two with the figures on either end of the
carriage, 3 on the nose and legs of the horse, and an extra one mounted behind
the figure on the rear of the horse.
|
|
|
| Author: | StormChaser | | Posted: | Apr 14, 2018 21:20 | | Subject: | Re: Inventory Change Request for Set 360-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | Please read the inventory not
|
Please read the inventory note, not the not. There is no not.
|
|
| Author: | StormChaser | | Posted: | Apr 14, 2018 21:19 | | Subject: | Re: Inventory Change Request for Set 360-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Brick1932 writes:
| | Please make changes to the following inventory:
* Add 4 Part 3069b Black Tile 1 x 2 with Groove
Comments from Submitter:
The item is in the list of alternate items but not in the actual list
|
Please read the inventory not at the bottom of the set inventory page. These
tiles come from an alternate version of the set which contains different instructions.
This request was not approved because the parts already exist in the set inventory
in their proper place.
|
|
| Author: | bb53904 | | Posted: | Apr 14, 2018 19:54 | | Subject: | Re: Inventory Change Request for Set 10246-1 | | Viewed: | 35 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, Thea writes:
| | It's up to you if you want to change the set to reflect this at BrickLink.
|
Since you found it in a sealed set, then yes. Please submit a change request,
though, so there will be a record of the details.
|
If there were the ability to note them as alternate spare parts, I would submit
a change request. I have no wish to make the BrickLink inventory conform to what
may have only occurred in my set.
Thea
|
|
| Author: | Brick1932 | | Posted: | Apr 14, 2018 16:52 | | Subject: | Inventory Change Request for Set 360-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 3069b Black Tile 1 x 2 with Groove
Comments from Submitter:
The item is in the list of alternate items but not in the actual list
|
|
| Author: | StormChaser | | Posted: | Apr 14, 2018 13:20 | | Subject: | Re: Inventory Change Request for Set 991201-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | Please make changes to the following inventory:
* Add 1 Set 991230-1 Large Green Plates Pack (Pack of 25)
|
This set was released in 2008 and I added it to the BrickLink catalog in 2016
when I found it in an Education catalog. In 2017, member MidwayPete reported
finding a new copy of the set and posted a photo on flickr:
https://www.flickr.com/photos/peterhoh/23850984678/in/album-72157618219993206/
In response to my request for further information, he posted this in the forum:
| | I have a crazy couple of days, after which I will take quality photos of the
set, each bag, and any printed material. The set was not sealed - that is, there
was no band around the bin, but the individual bags all appear to be there (and
are all unopened).
|
Unfortunately, after repeated attempts to contact him via PM he never followed
through. I have constructed a partial inventory consisting of the known contents
and noted what was unknown. I added some of the bags for this set to the BrickLink
catalog in 2010 because at that time some of them were being sold individually
on the LEGO website (the Shop at Home, I believe, but it could have been the
Education website).
I believe there is a copy of this set at the MERIT Library in Madison, WI in
the Teacher Education building if anyone would be interested in completing this
inventory.
|
|
|
| Author: | StormChaser | | Posted: | Apr 14, 2018 13:10 | | Subject: | Inventory Change Request for Set 991201-1 | | Viewed: | 36 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Set 991230-1 Large Green Plates Pack (Pack of 25)
|
| Author: | StormChaser | | Posted: | Apr 14, 2018 12:34 | | Subject: | Re: Inventory Change Request for Set 10246-1 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Thea writes:
| | It's up to you if you want to change the set to reflect this at BrickLink.
|
Since you found it in a sealed set, then yes. Please submit a change request,
though, so there will be a record of the details.
|
|
| Author: | bb53904 | | Posted: | Apr 14, 2018 05:12 | | Subject: | Re: Inventory Change Request for Set 10246-1 | | Viewed: | 42 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SylvainLS writes:
| | Now, what I think is that TLG noticed we had their rules figured, so they randomly
change them. 
|
I think I've decided that when it comes to TLG there are no rules.
|
Total Anarchy. I just opened MISB and built the Detective's Office
a few weeks ago. My extras don't agree with BrickLink or Rebrickable.
While I agreed with 2 extra Red
I also have 2 extra
and 3 extra
I have the ability to note any differences in my personal inventory at Rebrickable.
It's up to you if you want to change the set to reflect this at BrickLink.
Thea
Always An Adventure!
|
|
| Author: | StormChaser | | Posted: | Apr 13, 2018 21:26 | | Subject: | Re: Inventory Change Request for Set 4000001-1 | | Viewed: | 31 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | I'll post a smaller version of the relevant photo for future record.
|
|
|
|
| Author: | StormChaser | | Posted: | Apr 13, 2018 21:24 | | Subject: | Inventory Change Request for Set 4000001-1 | | Viewed: | 47 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 9 Part 4032b Black Plate, Round 2 x 2 with Axle Hole - X Opening
* Delete 2 Part 4032b Dark Bluish Gray Plate, Round 2 x 2 with Axle Hole - X Opening
* Add 9 Part 4032 Black Plate, Round 2 x 2 with Axle Hole
* Add 2 Part 4032 Dark Bluish Gray Plate, Round 2 x 2 with Axle Hole
Comments from Submitter:
Source for original inventory was given as set instructions. Therefore, submitter could not have known whether 4032 or 4032b was included. Numerous changes have already been made to this inventory to correct errors.
The year 2011 is currently the last year for 4032b and this set is one of only 4 sets in which it appeared that year.
Additionally, a sealed set appears to show that 4032 was included instead of 4032b. This can be seen here:
https://www.eurobricks.com/forum/index.php?/forums/topic/56346-review-moulding-machine-4000001-lego-insider-tour-exclusive/
And here:
https://www.flickr.com/photos/si-mocs/albums/72157626759883253
I'll post a smaller version of the relevant photo for future record.
|
|
| Author: | axaday | | Posted: | Apr 13, 2018 16:37 | | Subject: | Inventory Change Request for Set 76107-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Pearl Gold Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 21459 Flat Silver Minifig, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Extra)
* Add 4 Part 4085d Black Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip) (Alternate) (match ID 1)
* Change 4 Part Black 4085b Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) {match ID 0 to 1}
Comments from Submitter:
My personal opinion is that 4085b probably wasn't really found in 2018, but with no way of proving it I am taking the middle road. I parted out 3 and got all D's.
|
|
| Author: | StormChaser | | Posted: | Apr 13, 2018 15:57 | | Subject: | Re: Inventory Change Request for Set 10246-1 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SylvainLS writes:
| | Now, what I think is that TLG noticed we had their rules figured, so they randomly
change them.
|
I think I've decided that when it comes to TLG there are no rules.
|
|
| Author: | SylvainLS | | Posted: | Apr 13, 2018 15:13 | | Subject: | Re: Inventory Change Request for Set 10246-1 | | Viewed: | 34 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, 1977_mauro writes:
| | […]
"Normaly Lego add one extra of part 4073 per bag (of course there are exeptions
like in some 2017 sets)"
-- No, see my approved change request for Ship in the bottle, there were
5 extra light blue round plates included into this set, but only 3 bags with
these
plates. Two bags had 2 plates extra in each bag - and this set came out 2018...
|
Though this set is hardly “normal,” with all the water round plates needed (284).
It isn’t unbelievable that “rules” for bags of mixed bricks with a couple of
round plates aren’t the same than the ones for special bags with dozens of them.
Now, what I think is that TLG noticed we had their rules figured, so they randomly
change them.
|
|
| Author: | Hygrotus | | Posted: | Apr 13, 2018 13:36 | | Subject: | Re: Inventory Change Request for Set 10246-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, 1977_mauro writes:
| | Hi Marek,
I am not sure, if the third one was included in bag 1 or 2.
"Normaly Lego add one extra of part 4073 per bag (of course there are exeptions
like in some 2017 sets)"
-- No, see my approved change request for Ship in the bottle, there were
5 extra light blue round plates included into this set, but only 3 bags with
these
plates. Two bags had 2 plates extra in each bag - and this set came out 2018...
Mauro
In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, 1977_mauro writes:
| | Please make changes to the following inventory:
* Change {2 to 3} Part Red 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
3 are used in the building and 3 are extra parts.
|
One red 4073 is in one of bags numbered '1', two red 4073 are in one
of bags numbered '2'. Normaly Lego add one extra of part 4073 per bag
(of course there are exeptions like in some 2017 sets), so from this logic there
should be two extra only (part is in two bags). Here I also see only two extra
of this part https://www.eurobricks.com/forum/index.php?/forums/topic/103774-review-10246-detectives-office/
So you found in your set one more extra red 4073 is this correct? Just want to
be sure
Marek
|
|
Ok thanks for additional informations.
Marek
|
|
| Author: | 1977_mauro | | Posted: | Apr 13, 2018 12:52 | | Subject: | Re: Inventory Change Request for Set 10246-1 | | Viewed: | 34 times | | Topic: | Inventories Requests | |
|
| Hi Marek,
I am not sure, if the third one was included in bag 1 or 2.
"Normaly Lego add one extra of part 4073 per bag (of course there are exeptions
like in some 2017 sets)"
-- No, see my approved change request for Ship in the bottle, there were
5 extra light blue round plates included into this set, but only 3 bags with
these
plates. Two bags had 2 plates extra in each bag - and this set came out 2018...
Mauro
In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, 1977_mauro writes:
| | Please make changes to the following inventory:
* Change {2 to 3} Part Red 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
3 are used in the building and 3 are extra parts.
|
One red 4073 is in one of bags numbered '1', two red 4073 are in one
of bags numbered '2'. Normaly Lego add one extra of part 4073 per bag
(of course there are exeptions like in some 2017 sets), so from this logic there
should be two extra only (part is in two bags). Here I also see only two extra
of this part https://www.eurobricks.com/forum/index.php?/forums/topic/103774-review-10246-detectives-office/
So you found in your set one more extra red 4073 is this correct? Just want to
be sure
Marek
|
|
|
| Author: | samsam2 | | Posted: | Apr 13, 2018 11:54 | | Subject: | Inventory Change Request for Set 70165-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 92747pb12 Trans-Light Blue Minifig, Shield Oval with Lime Liquid and 'TOXIKITA' on Computer Screen Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Minifig uagt018s Agent Caila Phoenix with Jetpack with Sticker (Counterpart)
Comments from Submitter:
Ooops, here's my second attempt to add these parts to the correct set's inventory. It's not exactly easy to remember the progress of every part when each step forward can take days. I'm not complaining, just commenting.
|
|
| Author: | SezaR | | Posted: | Apr 13, 2018 05:43 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 34 times | | Topic: | Inventories Requests | |
|
| Nice idea but the box doesn't give us anything. This cowboy guy stays on
the back of the horse for the entire of his life.
In Inventories Requests, Thea writes:
| | In Inventories Requests, SezaR writes:
| | At first, I had checked the instructions but didn't see the legs of the hourse.
At the same time, I was in contact with a collector from Sweden. I asked him
and he said FIVE legs.
The photos that I uploaded are from the store Bluxe.
Stefaan, The problem is that there could have been a 6th leg so that the minifigure
on the horse can come down and walk, otherwise he has to borrow a pair of leg
from the legs or the "month" of that horse!
|
Sezar, Sometimes the question can be answered by the pictures on the back of
the set box. Can you ask the store Bluxe
if they have any photos of the back?
I wanted to look at mine, but it is in one of 4 large boxes that are supporting
a 6ft x 6ft display of a Texillion* Friends sets.
Thea
*This is a Texas measurement for anything approximately equal to the number of
counties in Texas. 41 of those counties are larger than Rhode Island. I can't
believe we haven't built a Googlefig yet. https://www.bricklink.com/message.asp?ID=1086035
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, SezaR writes:
| | Based on the comment of peterab, this inventory change request is not approved
No kidding, let me first check again with the collector of 12v train who checked
his copy yesterday. This is interesting now
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
|
Reza
What is the source here?
The instructions on Peeron are different as the build up on the picture.
Stefaan
|
|
|
|
|
|
| Author: | bb53904 | | Posted: | Apr 13, 2018 05:19 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 34 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | At first, I had checked the instructions but didn't see the legs of the hourse.
At the same time, I was in contact with a collector from Sweden. I asked him
and he said FIVE legs.
The photos that I uploaded are from the store Bluxe.
Stefaan, The problem is that there could have been a 6th leg so that the minifigure
on the horse can come down and walk, otherwise he has to borrow a pair of leg
from the legs or the "month" of that horse!
|
Sezar, Sometimes the question can be answered by the pictures on the back of
the set box. Can you ask the store Bluxe
if they have any photos of the back?
I wanted to look at mine, but it is in one of 4 large boxes that are supporting
a 6ft x 6ft display of a Texillion* Friends sets.
Thea
*This is a Texas measurement for anything approximately equal to the number of
counties in Texas. 41 of those counties are larger than Rhode Island. I can't
believe we haven't built a Googlefig yet. https://www.bricklink.com/message.asp?ID=1086035
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, SezaR writes:
| | Based on the comment of peterab, this inventory change request is not approved
No kidding, let me first check again with the collector of 12v train who checked
his copy yesterday. This is interesting now
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
|
Reza
What is the source here?
The instructions on Peeron are different as the build up on the picture.
Stefaan
|
|
|
|
| Author: | Hygrotus | | Posted: | Apr 13, 2018 05:01 | | Subject: | Re: Inventory Change Request for Set 10246-1 | | Viewed: | 36 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, 1977_mauro writes:
| | Please make changes to the following inventory:
* Change {2 to 3} Part Red 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
3 are used in the building and 3 are extra parts.
|
One red 4073 is in one of bags numbered '1', two red 4073 are in one
of bags numbered '2'. Normaly Lego add one extra of part 4073 per bag
(of course there are exeptions like in some 2017 sets), so from this logic there
should be two extra only (part is in two bags). Here I also see only two extra
of this part https://www.eurobricks.com/forum/index.php?/forums/topic/103774-review-10246-detectives-office/
So you found in your set one more extra red 4073 is this correct? Just want to
be sure
Marek
|
|
| Author: | LordSkylark | | Posted: | Apr 13, 2018 04:13 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| |
and now they replace it finally by new part
[m=sw909]
|
A very happy welcome.
|
|
| Author: | SezaR | | Posted: | Apr 13, 2018 03:46 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| At first, I had checked the instructions but didn't see the legs of the hourse.
At the same time, I was in contact with a collector from Sweden. I asked him
and he said FIVE legs.
The photos that I uploaded are from the store Bluxe.
Stefaan, The problem is that there could have been a 6th leg so that the minifigure
on the horse can come down and walk, otherwise he has to borrow a pair of leg
from the legs or the "month" of that horse!
In Inventories Requests, elias3 writes:
| | In Inventories Requests, SezaR writes:
| | Based on the comment of peterab, this inventory change request is not approved
No kidding, let me first check again with the collector of 12v train who checked
his copy yesterday. This is interesting now
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
|
Reza
What is the source here?
The instructions on Peeron are different as the build up on the picture.
Stefaan
|
|
|
| Author: | Hygrotus | | Posted: | Apr 13, 2018 03:32 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
|
and now they replace it finally by new part
[m=sw909]
|
|
| Author: | elias3 | | Posted: | Apr 13, 2018 03:16 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Based on the comment of peterab, this inventory change request is not approved
No kidding, let me first check again with the collector of 12v train who checked
his copy yesterday. This is interesting now
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
|
Reza
What is the source here?
The instructions on Peeron are different as the build up on the picture.
Stefaan
|
|
| Author: | elias3 | | Posted: | Apr 13, 2018 03:13 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 3 Part 15 Black Legs Old
Comments from Submitter:
Already included in the minifigures
|
This request will not be approved because there appear to be 5 of these legs
in the set according to the set instructions and approval of this request would
drop the number to 3.
However, it does bring up an interesting point: the minifigures in the set are
incorrectly assembled. As Stefaan pointed out, some changes to the minifigure
parts would be appropriate. He suggests removing the figures and having only
the parts in the inventory and that's not a bad idea since the instructions
don't really show complete figures.
The other option would be the addition of a new figure to the catalog which is
assembled like this figure from the torso upwards:
but includes this part in black as the legs:
Then 2 of those would be included as figures as shown in the instructions and
the cowboy on the horse would have only his parts (torso, head, hat) in the inventory.
As for old029, the instructions don't show that figure assembled that way
and it could be marked for deletion.
|
Hi
At that time we have more minifigs build up when they sit down.
In this set, it looks we have 2 minifigs but not one, (or: only '1' and
a half  )
when that '1' is also sit down.
https://www.bricklink.com/catalogItemInv.asp?S=617-1
http://www.peeron.com/scans/617-1/1
This one, not a real minifig because the motorcycle is part of it
https://www.bricklink.com/catalogItemInv.asp?S=659-1
http://www.peeron.com/scans/659-1/3
This is a correct one: we have sit down but can build up as a minifig without
extra's.
https://www.bricklink.com/v2/catalog/catalogitem.page?S=696-1#T=I
http://www.peeron.com/scans/696-1/1
about use the 3004 part, already in use are the slope parts
https://www.bricklink.com/catalogItemInv.asp?M=cas404
https://www.bricklink.com/catalogItemInv.asp?M=cas412
Stefaan
|
|
| Author: | SezaR | | Posted: | Apr 13, 2018 03:13 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
|
| Based on the comment of peterab, this inventory change request is not approved
No kidding, let me first check again with the collector of 12v train who checked
his copy yesterday. This is interesting now
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
|
|
| Author: | peterab | | Posted: | Apr 13, 2018 02:47 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
Those photos actually show six legs. Two with the figures on either end of the
carriage, 3 on the nose and legs of the horse, and an extra one mounted behind
the figure on the rear of the horse.
|
|
| Author: | VorpalRyu | | Posted: | Apr 13, 2018 01:41 | | Subject: | Re: Inventory Change Request for Set 75199-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, VorpalRyu writes:
| | Please make changes to the following inventory:
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 3024 Trans-Light Blue Plate 1 x 1 (Extra)
* Add 1 Part 4592c02 Light Bluish Gray Lever Small Base with Black Lever (Extra)
* Add 1 Part 64567 Metallic Silver Minifig, Weapon Lightsaber Hilt Straight (Extra)
Comments from Submitter:
Built set, these parts were left over in addition to a pair of arms for General Grievous.
|
You didn't have trans green
?
54200 is very common extra in modern sets.
|
No, no extra 54200 in trans-green, which was annoying, I was hoping there would
be at least one spare to add to my MOC parts supplies. Of the translucent green
colours, trans-green is the one I have the smallest amount for that part, being
that it's one of my favourite translucent colours (along with trans-medium
& trans-dark blue). I bought the set for the minifigures, with plans to part
it out into my MOC supplies, so not a complete annoyance, my trans-green 54200
increased, only by one, but still an increase.
|
|
| Author: | StormChaser | | Posted: | Apr 13, 2018 01:06 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
|
| Author: | SezaR | | Posted: | Apr 13, 2018 00:56 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 39 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | Please make changes to the following inventory:
* Change {3 to 2} Part Black 15 Legs Old
Comments from Submitter:
No source is given for the existing inventory which includes a total of 6 legs. Peeron's inventory lists 6 legs also and the source is given as instructions.
However, the instructions only show a total of 5 legs (3 for the horse and 2 for minifigures). In the absence of any evidence from an actual set and because of the likelihood that BL/Peeron inventory sources were set instructions, I am changing the count of legs to match the count shown in the instructions. Note that Brickset's inventory currently shows only 5 legs.
|
|
|
|
| Author: | StormChaser | | Posted: | Apr 13, 2018 00:36 | | Subject: | Inventory Change Request for Set 726-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {3 to 2} Part Black 15 Legs Old
Comments from Submitter:
No source is given for the existing inventory which includes a total of 6 legs. Peeron's inventory lists 6 legs also and the source is given as instructions.
However, the instructions only show a total of 5 legs (3 for the horse and 2 for minifigures). In the absence of any evidence from an actual set and because of the likelihood that BL/Peeron inventory sources were set instructions, I am changing the count of legs to match the count shown in the instructions. Note that Brickset's inventory currently shows only 5 legs.
|
|
| Author: | SezaR | | Posted: | Apr 13, 2018 00:29 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| Approved or rejected, there are only 5 of
not 6. Do I need to submit another request?
As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
Note that this set is the first train in which minifigure appear!
This set was released in 1976. I checked all catalogs I could find from 1977
but it did not appear in any of them.
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 3 Part 15 Black Legs Old
Comments from Submitter:
Already included in the minifigures
|
This request will not be approved because there appear to be 5 of these legs
in the set according to the set instructions and approval of this request would
drop the number to 3.
However, it does bring up an interesting point: the minifigures in the set are
incorrectly assembled. As Stefaan pointed out, some changes to the minifigure
parts would be appropriate. He suggests removing the figures and having only
the parts in the inventory and that's not a bad idea since the instructions
don't really show complete figures.
The other option would be the addition of a new figure to the catalog which is
assembled like this figure from the torso upwards:
but includes this part in black as the legs:
Then 2 of those would be included as figures as shown in the instructions and
the cowboy on the horse would have only his parts (torso, head, hat) in the inventory.
As for old029, the instructions don't show that figure assembled that way
and it could be marked for deletion.
|
|
|
| Author: | StormChaser | | Posted: | Apr 13, 2018 00:29 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, StormChaser writes:
| | However, it does bring up an interesting point: the minifigures in the set are
incorrectly assembled. As Stefaan pointed out, some changes to the minifigure
parts would be appropriate. He suggests removing the figures and having only
the parts in the inventory and that's not a bad idea since the instructions
don't really show complete figures.
|
Someone has pointed out to me privately that the way the figures are inventoried
in this set is something of an unwritten rule for these types of figures. They
are special exceptions which should be addressed in writing, but are not.
Since there is no guidance in the Help sections regarding these types of figures,
I will wait until it exists before doing anything further with these figures.
|
|
| Author: | 1977_mauro | | Posted: | Apr 13, 2018 00:12 | | Subject: | Inventory Change Request for Set 10246-1 | | Viewed: | 40 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {2 to 3} Part Red 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
3 are used in the building and 3 are extra parts.
|
|
| Author: | samsam2 | | Posted: | Apr 12, 2018 23:42 | | Subject: | Inventory Change Request for Set 75887-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 63864pb069 White Tile 1 x 3 with 'SCHAEFFLER' Logo Pattern (Sticker) - Set 75887 (Counterpart)
* Add 1 Part 62698pb11 Black Minifig, Utensil Computer Laptop with Race Car on Screen Pattern (Sticker) - Set 75887 (Counterpart)
|
|
| Author: | StormChaser | | Posted: | Apr 12, 2018 23:00 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 3 Part 15 Black Legs Old
Comments from Submitter:
Already included in the minifigures
|
This request will not be approved because there appear to be 5 of these legs
in the set according to the set instructions and approval of this request would
drop the number to 3.
However, it does bring up an interesting point: the minifigures in the set are
incorrectly assembled. As Stefaan pointed out, some changes to the minifigure
parts would be appropriate. He suggests removing the figures and having only
the parts in the inventory and that's not a bad idea since the instructions
don't really show complete figures.
The other option would be the addition of a new figure to the catalog which is
assembled like this figure from the torso upwards:
but includes this part in black as the legs:
Then 2 of those would be included as figures as shown in the instructions and
the cowboy on the horse would have only his parts (torso, head, hat) in the inventory.
As for old029, the instructions don't show that figure assembled that way
and it could be marked for deletion.
|
|
| Author: | Hygrotus | | Posted: | Apr 12, 2018 15:32 | | Subject: | Re: Inventory Change Request for Set 8105-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, jimbo4273 writes:
| | Please make changes to the following inventory:
* Add 1 Minifig exf015 Devastator - Pearl Light Gray Torso, Red Eyes
* Delete 1 Minifig exf009 Devastator - Trans-Red Torso, Red Eyes
Comments from Submitter:
The instructions and LEGO inventory page depicts a Devastator with a trans-red torso, but the set comes with a pearl light gray torso
|
I will accept this pearl light gray minifig addition but chanage it to alternate,
deletion of trans red one will not be accepted.
For the record (those messages in this thread will remain now):
Review of the set with exf015 (Pearl Light Gray)
https://www.youtube.com/watch?v=xZumqsnjY2s
Review of the set with exf009 (Trans Red)
https://www.youtube.com/watch?v=7U3nGXRyIkw
Marek
|
|
| Author: | SezaR | | Posted: | Apr 12, 2018 08:20 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
|
| There shouls be 5 of them. Currently y of them are listed. I just asked a collector
from Sweden.
I believe the windows 29 should be removed. Never saw them withput glass.
In Inventories Requests, elias3 writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 3 Part 15 Black Legs Old
Comments from Submitter:
Already included in the minifigures
|
Hi
No...
My source: instructions on Peeron!
there are 3 in use for the horse
http://www.peeron.com/scans/726-1/13
actually there is no minifig at all because all three head+hat+torso are separated
from the legs
count:
3x in white
3x in yellow
3x in blue
5x in black =
2x http://www.peeron.com/scans/726-1/9 and
3x http://www.peeron.com/scans/726-1/13
Don't know if there is/was a 3th legs part - as extra - to complete the 3th
minifig.
Isn't it better to remove the minifig and put all parts in the inventory
separate?
Stefaan
|
|
|
| Author: | elias3 | | Posted: | Apr 12, 2018 07:43 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 31 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 3 Part 15 Black Legs Old
Comments from Submitter:
Already included in the minifigures
|
Hi
No...
My source: instructions on Peeron!
there are 3 in use for the horse
http://www.peeron.com/scans/726-1/13
actually there is no minifig at all because all three head+hat+torso are separated
from the legs
count:
3x in white
3x in yellow
3x in blue
5x in black =
2x http://www.peeron.com/scans/726-1/9 and
3x http://www.peeron.com/scans/726-1/13
Don't know if there is/was a 3th legs part - as extra - to complete the 3th
minifig.
Isn't it better to remove the minifig and put all parts in the inventory
separate?
Stefaan
|
|
| Author: | Hygrotus | | Posted: | Apr 12, 2018 07:10 | | Subject: | Re: Inventory Change Request for Set 70165-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, samsam2 writes:
| | Please make changes to the following inventory:
* Add 1 Part 46212pb014 Trans-Light Blue Brick 1 x 2 x 5 without Side Supports with 'DNA TEST' and 'MOLECULE RESULT' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 46212pb015 Trans-Light Blue Brick 1 x 2 x 5 without Side Supports with 'ANALYSIS' and 'BRAIN ACTIVITY' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 30386pb07 Yellow Hinge Brick 1 x 2 Locking with Black Danger Stripes and 'AVA' on Clear Background Pattern on Both Sides (Stickers) - Set 70165 (Counterpart)
* Add 1 Part 30387pb015 Yellow Hinge Brick 1 x 4 Locking with Black Danger Stripes, Vents and 'RAF-165' on Clear Background Pattern on Both Sides (Stickers) - Set 70165 (Counterpart)
* Add 1 Part 57895pb048 Trans-Light Blue LegoGlass for Window 1 x 4 x 6 with Door Lock and 'LOCK' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 60581pb096 Trans-Light Blue Panel 1 x 4 x 3 with Side Supports - Hollow Studs with 'SATELLITE TRACKING' and Psyclone’s Flyer on Screen Pattern on Inside (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 59349pb137 Trans-Light Blue Panel 1 x 6 x 5 with Map, Computer Screen, Keyboard, 'AGENT PHOENIX' and 'SUSPECT' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 30602pb097 Trans-Light Blue Slope, Curved 2 x 2 Lip, No Studs with Silver and Black Circuitry Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 85984pb187 Black Slope 30 1 x 2 x 2/3 with Silver Ultra Agents Logo Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 13269pb003 Black Slope 45 6 x 4 Double / 33 (Train Roof) with Silver and Medium Azure Ultra Agents Logo Pattern (Sticker) - Set 70165 (Counterpart)
* Add 2 Part 3678bpb109 Black Slope 65 2 x 2 x 2 with Bottom Tube with Silver and Medium Azure Circuitry and Vents Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 30602pb098 Black Slope, Curved 2 x 2 Lip, No Studs with Silver Ultra Agents Logo and Vents Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 15068pb136 Dark Bluish Gray Slope, Curved 2 x 2 No Studs with Silver and Medium Azure Circuitry and Arrow Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 15068pb135 Black Slope, Curved 2 x 2 No Studs with Silver and Medium Azure Transformer Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 15068pb137 Black Slope, Curved 2 x 2 No Studs with Silver Ultra Agents Logo and 'QUAD ACCESS' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 15068pb138 Black Slope, Curved 2 x 2 No Studs with Stud Shooter and 'LOADING' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 93273pb083 Dark Bluish Gray Slope, Curved 4 x 1 Double No Studs with Lime, Silver and Black Circuitry, Microchips and Transformer Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 93273pb084 Dark Bluish Gray Slope, Curved 4 x 1 Double No Studs with Lime, Silver and Black Circuitry and Microchips Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 2431pb513 Black Tile 1 x 4 with Silver Ultra Agents Logo Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 6636pb159 Dark Bluish Gray Tile 1 x 6 with Silver and Medium Azure Circuitry and Vents Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 3069bpb639 Trans-Clear Tile 1 x 2 with Lime Liquid Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 87079pb478L Black Tile 2 x 4 with Silver and Medium Azure Ultra Agents Logo and Vents Left Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 87079pb478R Black Tile 2 x 4 with Silver and Medium Azure Ultra Agents Logo and Vents Right Pattern (Sticker) - Set 70165 (Counterpart)
|
What a challenge
Almost all were approved, but I found two issues
1. Part with sticker
should be 2 not 1, it is included on both legs on mech - instruction
book 1 page 18 and 21 and I see they are not mirrored. If it is OK then I will
adjust it manualy.
2. With this stickered part is bigger problem
it is part of minifig build, so shouldn't be separately in conterpart category
of this set inventory. It should be resolved as for example in this inventory:
so second minifig with this stickered part should be
added to catalog and then whole minifig added as counterpart. Like this:
[m=sw798]
[m=sw798s]
There is also example in Ultra Agents theme
from set
So I wll reject addition of this part to the inventory.
Marek
P.S. Now 6 sitckered parts only missing for this set
4 on part
one on and one on
|
|
| Author: | SezaR | | Posted: | Apr 12, 2018 06:33 | | Subject: | Inventory Change Request for Set 726-1 | | Viewed: | 36 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 3 Part 15 Black Legs Old
Comments from Submitter:
Already included in the minifigures
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Germany, Baden-Württemberg
USA, Illinois
Poland, w. Wielkopolskie
Slovakia, Žilinský Kraj
Canada, British Columbia
Belgium, Limburg
France, Nouvelle-Aquitaine
)
)
)
)
)
)
Australia, Victoria
)
)
)
)
)
)
)
)
