Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | SezaR  | | Posted: | Mar 19, 2018 21:40 | | Subject: | Inventory Change Request for Set 5590-1 | | Viewed: | 44 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 7 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 8 Part Light Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
|
 |
| Author: | SezaR | | Posted: | Mar 19, 2018 21:38 | | Subject: | Inventory Change Request for Set 5510-1 | | Viewed: | 49 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 3 Part Light Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
|
|
| Author: | el_gordo | | Posted: | Mar 19, 2018 21:32 | | Subject: | Inventory Change Request for Set 10000-1 | | Viewed: | 56 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Black {3044 Slope 45 2 x 1 Double - Undetermined Underside to 3044b Slope 45 2 x 1 Double - with Inside Bar}
* Change 1 Part Black {3049 Slope 45 2 x 1 Double / Inverted - Undetermined Underside to 3049b Slope 45 2 x 1 Double / Inverted - without Bottom Tube or Bottom Stud Holder}
Comments from Submitter:
Verified from newly-opened MISB set.
|
|
| Author: | el_gordo | | Posted: | Mar 19, 2018 20:55 | | Subject: | Inventory Change Request for Set 740-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
All jumpers in the 20th century were the same, ungrooved type
|
|
| Author: | el_gordo | | Posted: | Mar 19, 2018 20:52 | | Subject: | Inventory Change Request for Set 720-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Light Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
All jumpers in the 20th century were the same, ungrooved type
|
|
| Author: | el_gordo | | Posted: | Mar 19, 2018 20:50 | | Subject: | Inventory Change Request for Set 1655-1 | | Viewed: | 12 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
All jumpers in the 20th century were the same, ungrooved type.
|
|
| Author: | el_gordo | | Posted: | Mar 19, 2018 20:46 | | Subject: | Inventory Change Request for Set 6062-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
All jumpers in the 20th century were the same, ungrooved type. Other versions are comparatively recent.
|
|
| Author: | pzielak | | Posted: | Mar 19, 2018 15:56 | | Subject: | Inventory Change Request for Set 60064-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 11293pb003 Orange Aircraft Fuselage Curved Forward 6 x 8 Top with Arctic Explorer Logo Pattern (Sticker) - Set 60034 (Counterpart)
Comments from Submitter:
This part should be included as a counterpart to set 60064, similar to 60034.
|
|
| Author: | phyllisw8 | | Posted: | Mar 19, 2018 15:20 | | Subject: | Inventory Change Request for Set 7586-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4150pb185 Black Tile, Round 2 x 2 with Mirrored Magenta Circle Pattern (Sticker) - Set 7586 (Counterpart)
|
|
| Author: | Brick.Door | | Posted: | Mar 19, 2018 14:39 | | Subject: | Bricklink: please clean up incomplete sets | | Viewed: | 194 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| I recently listed another batch of used sets. Once again in reviewing prices
I found in most cases the cheapest one available for sale is listed as "complete"
but missing minifigures.
Bricklink can't you do a sweep of these errant listings and send the seller
a warning? Maybe query sets that are listed as complete but have the word "missing"
or "no minifigs" in the comments
I know you don't want to make changes automatically (the seller could have
written "no missing minifigures" or something) but it is a long and slow process
to find these one by one. And there are thousands of them listed.
Sounds like a lot of work? You are probably losing money too. The average
sold price is lower than it should be because so many incomplete sets are being
sold as complete. If sellers saw the real average price they would set their
prices higher and Bricklink would benefit from the higher commission.
For example I recently listed Star Wars set. The cheapest 3 currently available
(listed as complete) are $15, $20 and $24. None of them are complete according
to the sellers description.
The average sold for this set is $22 but since 3 of the sold sets were prices
$15, $15 and $21 they were probably incomplete but sold as complete and now are
polluting the price guide. The correct average sold is about $27
|
|
| Author: | lego.12vtrains | | Posted: | Mar 19, 2018 11:53 | | Subject: | Inventory Change Request for Set 5063-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 117983b (Not Applicable) Paper, Information Note, Special Suppressor Rail with Wire and Connector - 117983
|
|
| Author: | therobo | | Posted: | Mar 19, 2018 10:48 | | Subject: | Inventory Change Request for Minifig frnd241 | | Viewed: | 45 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* | | frnd241 (Inv) Friends Olivia (Nougat) - Bright Light Yellow Vest over Dark Azure Shirt and Dark Pink Tie, Dark Pink Shorts
Minifigures: Friends |
* Change 1 Part {Medium Dark Flesh to Flesh} 37588 Mini Doll, Head Friends with Light Brown Eyes and Glasses with Silver Frames, Magenta Lips and Closed Mouth Pattern
* Change 1 Part {Medium Dark Flesh to Flesh} FTFpb169c01 Torso Mini Doll Friends Bright Light Yellow Vest with Zippers over Dark Azure Shirt and Dark Pink Tie, Flesh Arms with Hands
|
|
| Author: | SezaR | | Posted: | Mar 19, 2018 05:55 | | Subject: | Inventory Change Request for Set 7722-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4274 Light Gray Technic, Pin 1/2 (Extra)
|
| Author: | saosivert | | Posted: | Mar 19, 2018 02:51 | | Subject: | Inventory Change Request for Set 41095-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2454pb128 Lavender Brick 1 x 2 x 5 with Dragonfly and Flowers Pattern (Sticker) - Set 41095 (Counterpart)
|
| Author: | saosivert | | Posted: | Mar 19, 2018 02:51 | | Subject: | Inventory Change Request for Set 41095-1 | | Viewed: | 15 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2454pb127 Lavender Brick 1 x 2 x 5 with Girl and Lime Parrot Pattern (Sticker) - Set 41095 (Counterpart)
|
|
| Author: | PurpleDave | | Posted: | Mar 18, 2018 21:52 | | Subject: | Save Offsite Paypal! | | Viewed: | 321 times | | Topic: | Suggestions | | Status: | Implemented | |
|
| Bricklink famously ground to a halt, twice, because it got hacked. The site
may have been restored to working condition, but a lot of us want nothing to
do with risking exposure of our financial accounts to anyone who may be lurking
behind the scenes. Sellers don't want to give Bricklink the level of control
required to accept payments through Bricklink. Bricklink has announced that
in about a month, they plan to scuttle offsite Paypal as a payment option, without
even taking any input from their core membership. The reason stated was that
new, usually one-time buyers, can't figure out where the payment button is
when they select offsite Paypal as a payment option, so they plan to basically
cut off any buyers and sellers who refuse to use any other form of payment, and
who especially want nothing to do with any onsite Paypal options.
Make offsite Paypal an opt-in payment option. Sellers obviously have to select
up front which payment options they will accept. Make all _buyers_ voluntarily
choose to see offsite Paypal as a payment option when checking out. If a seller
does not accept any other payment options, have them flagged as "does not ship
to you", just like if they were from another country and didn't have your
country enabled for shipping options. If a new buyer signs up, they should be
required to read an explanation of how offsite Paypal works, and confirm that
they want to be able to choose that as a payment option before they even see
it appear in lists.
But seriously, don't chase away a bunch of your regular customers in the
hope that you might be able to "grow your business" on the bank accounts of people
who just get sent here to buy a replacement part that LEGO Consumer Affairs can't
provide, or who are looking for just one retired set, and will never log in again
after they receive their shipment.
|
|
| Author: | Jojo | | Posted: | Mar 18, 2018 21:18 | | Subject: | Inventory Change Request for Set 75827-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 33009pb056 Reddish Brown Minifig, Utensil Book 2 x 3 with 'MAGICAL PATHS TO FORTUNE AND POWER' and 2 x 4 Brick Pattern (Sticker) - Set 75827 (Counterpart)
|
| Author: | Jojo | | Posted: | Mar 18, 2018 21:17 | | Subject: | Inventory Change Request for Set 41134-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 33009pb057 Magenta Minifig. Utensil Book 2 x 3 with Wavy Piano Keys Pattern (Sticker) - Set 41134 (Counterpart)
|
| Author: | Jojo | | Posted: | Mar 18, 2018 21:16 | | Subject: | Inventory Change Request for Set 41335-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 33009pb058 Magenta Minifig, Utensil Book 2 x 3 with 'Scary Stories' and Ghost with Speech Bubble Pattern (Sticker) - Set 41335 (Counterpart)
|
|
| Author: | elias3 | | Posted: | Mar 18, 2018 15:52 | | Subject: | Inventory Change Request for Set 60173-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 59895 Black Tire 14mm D. x 4mm Smooth Small Single - New Style - with Number Molded on Side (Extra)
* Add 1 Part 61482 Light Bluish Gray Minifig, Utensil Handcuffs (Extra)
* Add 1 Part 4274 Light Bluish Gray Technic, Pin 1/2 (Extra)
* Add 1 Part 4624 Light Bluish Gray Wheel 8mm D. x 6mm (Extra)
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Trans-Red Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Trans-Green Tile 1 x 1 with Groove (Extra)
* Add 1 Part 6266 Reddish Brown Leg Skeleton (Extra)
* Add 1 Part 98138 Trans-Clear Tile, Round 1 x 1 (Extra)
* Add 1 Part 2447 Trans-Black Minifig, Visor Standard (Extra)
* Add 1 Part 4073 Trans-Light Blue Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
all extra's
|
|
| Author: | alahaka | | Posted: | Mar 18, 2018 15:30 | | Subject: | Have all members pay BL $1 to buy and/or sell | | Viewed: | 343 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Mentioned in other posts, I am submitting this as a separate suggestion.
The goal of the $1 payment is to preclude new members from making false orders
and thereby avoid time wasted on pulling order items, attaining packing supplies,
calculating shipping, etc.
Perhaps there is also a benefit with regard to new sellers. Not sure.
I recognize there will be process, payment, and accounting challenges for BrickLink
administrators, along with maybe an undesired initial action to become a member,
however this proposal would screen out false buyers, and benefit the integrity
and positive experiences of the entire new member, buyer, and seller community
-- which for my part is a key reason I'm here.
|
|
| Author: | alahaka | | Posted: | Mar 18, 2018 15:05 | | Subject: | Seller checkout approval for <X new buyers | | Viewed: | 115 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Whether X = 0 or some short optional range between say -3 and +3, I suggest
that any seller be able to approve of new zero-or-low-feedback members before
they are allowed to check out.
As a heads-up courtesy, new buyers can be advised by BrickLink, via a notice
both near the cart symbol while shopping and in the cart, that checking out will
require the seller's approval.
Attaining approval would require a BrickLink message from the prospective buyer
to the seller requesting to check out. In lieu of a better indicator, this message,
or perhaps more importantly the simple effort to send it, would allow a seller
to make an approval or disapproval decision.
The seller makes a decision, with ideally everything being on the up & up, and
a bona fide order and purchase follow.
However the rule and process is set up, it can be deconflicted with the "Disallow
members with negative feedback" rule.
- - - -
A better solution that what's above, to minimize time-wasting
fake orders, is to have all buyers pay BrickLink a dollar or euro before being
allowed to order.
I for one am happy to pay a dollar, although I cannot speak for anyone else.
- - - -
I've welcomed several new buyers to BrickLink, and I hope to welcome more.
On the flip side, I spent an hour-and-a-half pulling eight sets last Thursday
night, in order to identify a good shipping box (which to free up involved shifting
around several more sets) and to attain an accurate overseas shipping quote on
behalf of the customer, assuming the best with regard to their intentions. I
did this promptly within three hours of order receipt, in order to set up a timely
invoice.
I almost took everything to the post office the next day, in order to get a better
weight since the big box covered my small scale. Thankfully the member's
first negative arrived before that, and I decided to estimate the weight.
This morning, I spent another hour getting these sets back to their storage places.
I did all this on behalf of someone who is playing a mean game with several BrickLink
sellers ... ... ... simply because he can as a new member. Furthermore,
he's now at -4 and has the BrickLink greenlight to order from unsuspecting
sellers. The wasted-time toll of this false buyer round remains TBD.
My sets are safely stored wherever they fit throughout my place; I do not have
a crystal ball to store them in some purchase and ease-of-access order; and I
do not have a warehouse facility.
In light of such service efforts, extensive or otherwise, sellers should be able
to screen new buyers, even if such an evaluation is limited to interpreting a
message.
Or have everyone pay BrickLink a token amount before receiving buyer privileges.
Probably not easy given payment means and currencies, but it would likely alleviate
an ongoing and possibly growing issue.
|
|
| Author: | saosivert | | Posted: | Mar 18, 2018 14:09 | | Subject: | Inventory Change Request for Set 9495-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 6259pb036 White Cylinder Half 2 x 4 x 4 with Silver Hatch and Mechanical Pattern (Sticker) - Set 9495 (Counterpart)
|
| Author: | saosivert | | Posted: | Mar 18, 2018 14:02 | | Subject: | Inventory Change Request for Set 60145-1 | | Viewed: | 10 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 98834pb10 White Vehicle, Spoiler 2 x 4 with '85' and Dark Bluish Gray and Red Stripes Pattern (Sticker) - Set 60145 (Counterpart)
|
| Author: | saosivert | | Posted: | Mar 18, 2018 14:01 | | Subject: | Inventory Change Request for Set 60145-1 | | Viewed: | 10 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 24309pb007 White Slope, Curved 3 x 2 No Studs With Dark Bluish Gray and Red Stripes Pattern (Sticker) - Set 60145 (Counterpart)
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Canada, British Columbia
Portugal
USA, Michigan
Italy, Veneto
Germany, Berlin
Russia, Tatarstan
Belgium, Oost-Vlaanderen
