Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | calsbricks | Posted: | Jan 17, 2016 10:33 | Subject: | Inventory Change Request for Set 31018-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 15712 Dark Bluish Gray Tile, Modified 1 x 1 with Clip - Rounded Edges (Alternate)
Comments from Submitter:
3 sets parted out - all had the rounded clip
|
|
Author: | calsbricks | Posted: | Jan 8, 2016 06:34 | Subject: | Re: Bricklink logins/accounts | Viewed: | 74 times | Topic: | Suggestions | |
|
| In Suggestions, Rob_and_Shelagh writes:
| In Suggestions, calsbricks writes:
| In Suggestions, Rob_and_Shelagh writes:
| In Suggestions, calsbricks writes:
| This one has been around a long time and unfortunately nothing seems to be happening
with it.
Bricklink needs to change the way the login/accounts function works. As a medium
sized store with an owner and 3 employees we need to allow the employees to log
into Bricklink and update store inventory, prices etc almost every day and as
things currently stand they have to use the owners login details (Poor security).
SQL, which is used for the database has quite a good security system built in
so even if we went native with that, it would be better than the current situation.
The same thing applies for stores with multiple locations - we have two processing
centres - one where all of our Lego inventory is stored, picked etc and one where
orders are packed and shipped from. Hence we want to set up a shipping from address
and a shipping to address. The fact that not all stores support the alternate
address system on Bricklink, as it currently stands means the only real way to
do this is using alternates on Paypal (for those that use Paypal).
So in summary - multiple logins to the stores with security/control permissions
and a minimum of 2 address for each store - one for ship from and 1 for ship
to.
|
The above would be a nice to have for us.... but had to vote no because of the
below.
| As an afterthought it might not be a bad idea to allow store owners to have two
accounts - one for buying and one for selling, with the appropriate feedback
associated with each function. This might make a difference as to how people
look at a situation - In our case we have over 800 buying feedback and over 2000
selling feedbacks.
|
Robert
|
Interesting Robert - can you elaborate? We know you can see the individual feedbacks
as to buying or selling by looking at the feedback profile but if they had a
facility for this it would save time and issues with a number of us.
|
The whole idea behind NOT having 2 accounts is to avoid potential abuse by sellers
who want one "clean" feedback account for selling and another "dirty" one which
would allow them to play games with other sellers without tarnishing their store
reputation (not suggesting you would use it that way Bill but there are many
who would). I personally like the way it is now so you can see on the FB page
how a member behaves as a seller and as a buyer. If anything I'd like the
FB the member leaves for others (as buyer and seller) to be more obvious/visible
but I'd much rather leave what ain't broke alone.
Robert
|
Understand - thanks for clarifying. Will cancel this and re-do without the 'afterthought'.
To be honest not sure I should cause the way suggestions are set up is not very
good or productive - it is almost to the stage of why bother......
|
|
Author: | calsbricks | Posted: | Jan 8, 2016 04:49 | Subject: | Re: Bricklink logins/accounts | Viewed: | 49 times | Topic: | Suggestions | |
|
| In Suggestions, mabccc writes:
| | Bricklink needs to change the way the login/accounts function works. As a medium
sized store with an owner and 3 employees we need to allow the employees to log
into Bricklink and update store inventory, prices etc almost every day and as
things currently stand they have to use the owners login details (Poor security).
SQL, which is used for the database has quite a good security system built in
so even if we went native with that, it would be better than the current situation.
|
What is the suggestion here, that you can have "minion" sub-accounts that can
access some functions but not others?
| The same thing applies for stores with multiple locations - we have two processing
centres - one where all of our Lego inventory is stored, picked etc and one where
orders are packed and shipped from. Hence we want to set up a shipping from address
and a shipping to address. The fact that not all stores support the alternate
address system on Bricklink, as it currently stands means the only real way to
do this is using alternates on Paypal (for those that use Paypal).
|
Why not just use the ship to address? Does it matter if a buyer thinks you are
shipping it from location A when in reality it comes from location B? Surely
any returns eventually go to the storage location A and not the packing location
anyway.
|
Good morning and thank you for taking the time to comment.
The multiple logins for each store would allow us to set up our employees and
give them certain functions - not complete administration which they have now
due to logging in with the single account. Not sure I would want to call them
minions though.
The ship to and ship from addresses are not used as you outline them so perhaps
we didn't explain that properly. When we buy items they are not always destined
for the storage centre, so to save going back and forth all deliveries go to
the order packing centre - are processed there and then whatever needs to go
to the other site goes and what doesn't doesn't. Hope I have made that
clearer. We cope at the moment by instructing the stores we buy from to send
to the paypal address not the Bricklink one but from time to time they miss that
and send it to the storage area which delays things.
|
|
Author: | calsbricks | Posted: | Jan 8, 2016 04:43 | Subject: | Re: Bricklink logins/accounts | Viewed: | 61 times | Topic: | Suggestions | |
|
| In Suggestions, Rob_and_Shelagh writes:
| In Suggestions, calsbricks writes:
| This one has been around a long time and unfortunately nothing seems to be happening
with it.
Bricklink needs to change the way the login/accounts function works. As a medium
sized store with an owner and 3 employees we need to allow the employees to log
into Bricklink and update store inventory, prices etc almost every day and as
things currently stand they have to use the owners login details (Poor security).
SQL, which is used for the database has quite a good security system built in
so even if we went native with that, it would be better than the current situation.
The same thing applies for stores with multiple locations - we have two processing
centres - one where all of our Lego inventory is stored, picked etc and one where
orders are packed and shipped from. Hence we want to set up a shipping from address
and a shipping to address. The fact that not all stores support the alternate
address system on Bricklink, as it currently stands means the only real way to
do this is using alternates on Paypal (for those that use Paypal).
So in summary - multiple logins to the stores with security/control permissions
and a minimum of 2 address for each store - one for ship from and 1 for ship
to.
|
The above would be a nice to have for us.... but had to vote no because of the
below.
| As an afterthought it might not be a bad idea to allow store owners to have two
accounts - one for buying and one for selling, with the appropriate feedback
associated with each function. This might make a difference as to how people
look at a situation - In our case we have over 800 buying feedback and over 2000
selling feedbacks.
|
Robert
|
Interesting Robert - can you elaborate? We know you can see the individual feedbacks
as to buying or selling by looking at the feedback profile but if they had a
facility for this it would save time and issues with a number of us.
|
|
Author: | calsbricks | Posted: | Jan 8, 2016 02:54 | Subject: | Bricklink logins/accounts | Viewed: | 268 times | Topic: | Suggestions | Status: | Discarded | |
|
| This one has been around a long time and unfortunately nothing seems to be happening
with it.
Bricklink needs to change the way the login/accounts function works. As a medium
sized store with an owner and 3 employees we need to allow the employees to log
into Bricklink and update store inventory, prices etc almost every day and as
things currently stand they have to use the owners login details (Poor security).
SQL, which is used for the database has quite a good security system built in
so even if we went native with that, it would be better than the current situation.
The same thing applies for stores with multiple locations - we have two processing
centres - one where all of our Lego inventory is stored, picked etc and one where
orders are packed and shipped from. Hence we want to set up a shipping from address
and a shipping to address. The fact that not all stores support the alternate
address system on Bricklink, as it currently stands means the only real way to
do this is using alternates on Paypal (for those that use Paypal).
So in summary - multiple logins to the stores with security/control permissions
and a minimum of 2 address for each store - one for ship from and 1 for ship
to.
As an afterthought it might not be a bad idea to allow store owners to have two
accounts - one for buying and one for selling, with the appropriate feedback
associated with each function. This might make a difference as to how people
look at a situation - In our case we have over 800 buying feedback and over 2000
selling feedbacks.
|
|
Author: | calsbricks | Posted: | Jan 5, 2016 09:55 | Subject: | Inventory Change Request for Set 30240-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15712 Black Tile, Modified 1 x 1 with Clip - Rounded Edges (Alternate)
Comments from Submitter:
Two Polybags parted out and both had the rounded clips
|
Author: | calsbricks | Posted: | Jan 5, 2016 03:32 | Subject: | Inventory Change Request for Set 70723-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 3 Part 3794 Black Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate)
Comments from Submitter:
2 Sets parted out - both had the non-groove variant.
|
Author: | calsbricks | Posted: | Dec 27, 2015 10:35 | Subject: | Inventory Change Request for Set 70130-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15712 Black Tile, Modified 1 x 1 with Clip - Rounded Edges (Alternate)
Comments from Submitter:
Two sets parted out today both had the variant.
|
|
Author: | calsbricks | Posted: | Dec 21, 2015 08:59 | Subject: | Inventory Change Request for Set 10195-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 14 Part 32064b Dark Bluish Gray Technic, Brick 1 x 2 with Axle Hole - New Style with X Opening (Alternate)
Comments from Submitter:
Set parted out today had mix of 32064 and 32064b.
|
|
Author: | calsbricks | Posted: | Dec 16, 2015 14:56 | Subject: | Inventory Change Request for Set 10245-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4085b Blue Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (Alternate)
* Add 18 Part 6019 Pearl Gold Plate, Modified 1 x 1 with Clip Horizontal (thick open U clip) (Alternate)
* Add 1 Part 4085b Light Bluish Gray Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (Alternate)
* Add 4 Part 4085b Reddish Brown Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (Alternate)
Comments from Submitter:
2 Sets parted out today all had the alternates as shown above.
|
|
Author: | calsbricks | Posted: | Dec 2, 2015 13:25 | Subject: | Inventory Change Request for Set 70724-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 2436b Black Bracket 1 x 2 - 1 x 4 with Rounded Corners (Alternate)
Comments from Submitter:
2 Sets parted out - both had non-rounded corners
|
Author: | calsbricks | Posted: | Nov 7, 2015 08:03 | Subject: | Inventory Change Request for Set 76014-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Dark Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate)
Comments from Submitter:
2 sets parted out - both had non-groove variant
|
|
Author: | calsbricks | Posted: | Nov 7, 2015 07:54 | Subject: | Re: Inventory Management help from Bricklink | Viewed: | 36 times | Topic: | Suggestions | |
|
| In Suggestions, brickcounter writes:
| In Suggestions, calsbricks writes:
| Have suggested this direct to Bricklink development and whilst the response has
been positive so far we are still waiting for either a confirmation that it will
become available (and when) or a reason why it cannot be done.
We have had good feedback from several of the UK's stores and wonder what
others around the globe feel.
This should give us the ability to deal with our inventories on a more accurate
basis and , if there are any gremlins in Bricklink's system, point them out.
Thoughts?
|
We currently log individual part transaction history (inward and outward) using
the API, so it's definitely doable, but there are obviously more pressing
tasks for the development team. Nothing to stop sellers doing it for themselves
if they have a mind to do so.
To that end, I'd be interested to know if there's any serious interest
from sellers for a non-programmer's guide to utilising the BL API?
As a recently converted non-programmer myself, it's something I've considered
writing, but with free time being a finite resource, it all too easy to find
reasons for not embarking on such a project, especially when the potential audience
for such a manual is unknown.
|
Hello there and thank you for joining the conversation.
We do the same but use an in-house developed application (Access) to records
ins and outs. We also run inventory checks on every order but we still find there
are discrepancies - far too many to be human error only. If it is doable and
we knew it was, then they should do it now - just as they are taking all these
sidewards steps on their development plans, this is a key one for the stores
and it helps them as well in so much as people should be able to trace the issues
much more easily.
We have offered to provide the query for them to extract the information (we
are a SQL Software house), provided they share the db scheme with us and are
waiting for a further response from Marvin at development.
A short time ago someone e3lse provided a non-programming guide to adding templates
to Brickstock. From what I understand from him (we used it and found it very
helpful) not many others took it up.
|
|
Author: | calsbricks | Posted: | Nov 7, 2015 06:55 | Subject: | Re: Inventory Management help from Bricklink | Viewed: | 29 times | Topic: | Suggestions | |
|
| In Suggestions, mabccc writes:
| Looks like it could be useful. But for stores doing 100s if orders per month,
it will be a very large file. Given how slow BL has been on and off recently,
we need assurance that the infrastructure can handle it. If everyone started
downloading a six month report every day, then there could be trouble. Maybe
it's use would need to be restricted.
|
Hello there and thanks for joining in with this suggestion. Putting restrictions
on this would defeat the purpose. It is up to Bricklink to sort out their infrastructure
- which has been a menace recently.
|
|
Author: | calsbricks | Posted: | Nov 7, 2015 00:47 | Subject: | Inventory Management help from Bricklink | Viewed: | 184 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Have suggested this direct to Bricklink development and whilst the response has
been positive so far we are still waiting for either a confirmation that it will
become available (and when) or a reason why it cannot be done.
We have had good feedback from several of the UK's stores and wonder what
others around the globe feel.
This should give us the ability to deal with our inventories on a more accurate
basis and , if there are any gremlins in Bricklink's system, point them out.
Thoughts?
|
|
|
Author: | calsbricks | Posted: | Nov 6, 2015 12:03 | Subject: | Inventory Change Request for Set 10697-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3070b Bright Pink Tile 1 x 1 with Groove (Extra)
Comments from Submitter:
6 sets parted out - all had 1 extra 3070b in Bright Pink
|
|
Author: | calsbricks | Posted: | Nov 5, 2015 10:17 | Subject: | Re: Improvements to Price Guide | Viewed: | 43 times | Topic: | Suggestions | |
|
| In Suggestions, Minifigforlife writes:
| I agree that a report telling you about the new lots that you can either save
or print would help enormously when putting items away.
I am not sure that Bricklink does store the part out value of a set historically,
it just presents the value to you at the time.
|
Hello there and thank you for taking the time to comment on our suggestion. As
Bricklink allows you to group prices by month, it must hold the information somewhere.
If it doesn't it is poor database design.
Perhaps Ryan or someone involved with the scheme could comment on that as it
would be useful to know.
|
|
Author: | calsbricks | Posted: | Nov 5, 2015 09:59 | Subject: | Improvements to Price Guide | Viewed: | 161 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Thought I would try this one more time. Currently if you use the price guide
to look at the value of parting out a set you get a figure for its value and
how many new lots will get added to your inventory.
We would like to see a simple little screen or report based result of the work
that Bricklink has done as far as determining which lots are the new one. This
helps us enormously in determining how we approach parting out.
Secondly and equally as important to us is the need to be able to follow the
value of the sets as they are parted out over time. So when the set was launched
it had a higher part out value than 6 months later, in some cases there are also
times when the set is much more valuable later on. This would help us as a store
to determine how long before we part out various sets that we have stock of.
At the moment we have a very crude offline system which gives us the result of
parting out at the date when we did it. Bricklink has all this data in its database
- surely we should be able to get at it as a valuable tool for the stores.
Remember without stores there would be no Bricklink !!! (I know the same applies
to buyers)
|
|
Author: | calsbricks | Posted: | Oct 23, 2015 10:16 | Subject: | Inventory Change Request for Set 76022-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 3794 Dark Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate)
Comments from Submitter:
Two sets parted out both had the non-groove variant
|
|
Author: | calsbricks | Posted: | Oct 22, 2015 07:27 | Subject: | Inventory Change Request for Set 76020-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 3794 Reddish Brown Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate)
Comments from Submitter:
Two sets parted out today both had the non-groove version of the plate
|
|
Author: | calsbricks | Posted: | Oct 20, 2015 02:25 | Subject: | Inventory Change Request for Set 75025-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Black Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate)
Comments from Submitter:
2 new sets parted out - both had the non-groove version
|
|
Author: | calsbricks | Posted: | Oct 5, 2015 10:17 | Subject: | Change to the way Bricklink Present fees | Viewed: | 158 times | Topic: | Suggestions | Status: | Discarded | |
|
| For some time now we have had considerable difficulty in reconciling the fees
statement to our accounts system. The fees are always paid - there is no problem
there, but the fact that it is a summary rather than detail and the conversion
rates may or may not be different it makes it a job rather than just a quick
check.
We would like to see each store given the option to receive either the summary
or a detailed breakdown. The detailed breakdown should include each order the
store is being charged for the date and value of that order and the calculated
fee + currency conversion rate.
Those of us who do not deal in dollars would like that information available.
Those who don't require it can remain with the summary.
If the fees program is within the code for Bricklink, this should not be a complicated
change as it has all the info already. If it is in another system that would
have to be looked at but even today's most simple billing programs allow
for this type of information to be presented.
|
|
Author: | calsbricks | Posted: | Sep 18, 2015 12:00 | Subject: | Inventory Change Request for Set 30244-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Black Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate)
Comments from Submitter:
2 Sets parted out both had 3794's instead of 3794b's.
|
|
Author: | calsbricks | Posted: | Sep 9, 2015 10:46 | Subject: | Inventory Change Request for Set 31022-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3713 Red Technic Bush (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 3673 Light Bluish Gray Technic, Pin without Friction Ridges Lengthwise (Extra)
Comments from Submitter:
2 Sets parted out each had one extra of above parts.
|
|
Author: | calsbricks | Posted: | Sep 9, 2015 10:14 | Subject: | Inventory Change Request for Set 31022-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4073 Black Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
2 sets parted out both had 1 extra of each of the above
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|