Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | randyf | Posted: | Apr 20, 2024 00:00 | Subject: | Re: 553b | Viewed: | 32 times | Topic: | Catalog | |
| In Catalog, Bond writes:
| In Catalog, randyf writes:
Ah. So...I could just use the plain 553 entry to add that part in Set 22011 to
my inventory -- assuming that entry also pertains to any 553 having axle
holes -- and no need for a CCR?
Hoping that this is the case.
- B
|
Yes. 👍
|
|
Author: | randyf | Posted: | Apr 19, 2024 20:42 | Subject: | Re: 553b | Viewed: | 30 times | Topic: | Catalog | |
| In Catalog, Bond writes:
| During parting out and adding to my inventory this set:
I noticed that 553b (aka Brick, Round 2 x 2 Dome Top, C = Magenta or 71) is without
either catalog entry or image. I was about to submit a Cat Change Request and
then I remembered the ongoing headaches regarding the Variant Project as detailed
in this message:
https://www.bricklink.com/message.asp?ID=1451828
So, is the image and entry merely and temporarily 'down' due to Variant
Project implementation? Or is 553b entry actually gone-gone and a CCR needs
to be completed in order to make 553b part of 553? Note that there are currently
only two catalog entries for Brick, Round 2 x 2 Dome Top. One is while
553a is listed as "without Bottom Axle Holder".
FWIW, the 553 in Set 11022 has a blocked open stud.
I'm uncertain what action to take, or if I even should.
- B
|
The inventory is correct as is since 553b is gone, gone as of April 12:
https://www.bricklink.com/catalogReqList.asp?nID=&viewDate=Y&viewType=E&viewStatus=1.2&itemType=P&viewAction=M
|
|
Author: | randyf | Posted: | Apr 18, 2024 21:33 | Subject: | Re: Technic Turntable 60T Redesign - 88738 | Viewed: | 41 times | Topic: | Catalog | |
| In Catalog Requests, Duq writes:
| So, Catalog admins, will this get updated?
|
Yes.
| At the moment you have 18938 and 88738 as alternate numbers for the same part,
and 48168 as a mold variant. How anyone could have entered a 60 tooth gear as
mold variant of a 56 tooth gear is a question for another day...
From what I can see the mold variant link should be removed - Z56 and Z60 are
different.
The alternate number link should also be removed, and the descriptions of the
part should be updated to reflect the bevel teeth on one of them.
Or does all this fall in your recent program of dumbing down the database...
|
That had nothing to do with the catalog administrators.
|
|
Author: | randyf | Posted: | Apr 17, 2024 12:29 | Subject: | Re: Sent an email to support 2.5 months ago | Viewed: | 52 times | Topic: | Help | |
| In Help, Poncke writes:
| I sent a ticket to support two and a half months ago and still havent received
a reply
I do not have enough words to express my frustration about this.
There is no ticket system, no ticket reference, not even an option to see the
ticket I logged, no option to follow up. Just absolutely nothing, and this place
is owned by Lego.
Baffling is an understatement.
How do I get a reply from bricklink?
|
I wouldn't worry about it too much. Help is on the way.
https://www.bricklink.com/message.asp?ID=1442600
|
|
Author: | randyf | Posted: | Apr 16, 2024 21:58 | Subject: | Inventory Change Request for Set 2445-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Orange {4010px1 Duplo Cow Adult, Black Eyes to 4010pb01 Duplo Cow Adult, Black and White Eyes}
Comments from Submitter:
https://www.bricklink.com/message.asp?ID=1465048
|
Author: | randyf | Posted: | Apr 16, 2024 20:11 | Subject: | Re: Inventory Change Request for Set 70404-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
|
|
|
|
Author: | randyf | Posted: | Apr 16, 2024 16:48 | Subject: | Re: Inventory Change Request for Set 70404-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Delete 1 Part 30237 Black Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type)
* Delete 8 Part 30237 Dark Bluish Gray Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type)
* Add 1 Part 30237a Black Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)
* Add 8 Part 30237a Dark Bluish Gray Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)
Comments from Submitter:
I own a copy of this set and the u clip is the variant included.
|
Requests accepted.
Sealed set unboxing and build showing the 30237a variants:
https://brickshelf.com/cgi-bin/gallery.cgi?f=539712
https://brickshelf.com/cgi-bin/gallery.cgi?i=6031525
https://brickshelf.com/cgi-bin/gallery.cgi?i=6031531
|
|
|
Author: | randyf | Posted: | Apr 16, 2024 16:08 | Subject: | Re: Inventory Change Request for Set 30131-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Delete 3 Part 3794 Reddish Brown Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type)
* Add 3 Part 3794a Reddish Brown Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)
Comments from Submitter:
As you can see in the item picture the without groove variant is clearly included.
|
We do not use set images for change requests.
However, this request will be accepted due to finding evidence of 3794a from
a sealed set opening and review:
https://youtu.be/z_u3zN5-c2U?t=39
|
|
|
Author: | randyf | Posted: | Apr 16, 2024 15:38 | Subject: | Re: Inventory Change Request for Set 70402-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Delete 2 Part 30237 Dark Bluish Gray Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) (match ID 1)
* Add 2 Part 30237a Dark Bluish Gray Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip) (match ID 1)
Comments from Submitter:
If alternate item is the round clip the real alternative to the undetermined clip is the U clip. Plus I own a copy of this set and the u clip is the one included.(I bought the whole sub series -1 set)
|
Request accepted.
30237a shown in the unboxing and build here:
https://youtu.be/Qj3AwKE_Xt8?t=278
30237b shown in the unboxing and build here:
https://brickshelf.com/cgi-bin/gallery.cgi?f=538286
|
|
|
Author: | randyf | Posted: | Apr 16, 2024 14:54 | Subject: | Re: Inventory Change Request for Set 70400-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Delete 3 Part 3794 Tan Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (Alternate) (match ID 1)
Comments from Submitter:
I don’t know how this works but if you think about it, a undetermined type can’t be a alternate item.
|
There is plenty of easily found video evidence to support the 'b' variant
of the jumper, so that one is okay.
And here is proof of the 'a' variant of the jumper:
https://brickshelf.com/cgi-bin/gallery.cgi?f=537604
Specifically
https://brickshelf.com/cgi-bin/gallery.cgi?i=6003391
|
|
|
Author: | randyf | Posted: | Apr 16, 2024 13:17 | Subject: | Re: Help desk not responding | Viewed: | 55 times | Topic: | General | |
| https://www.bricklink.com/message.asp?ID=1442600
In General, Swatson217 writes:
| I finally sent an email to Lego corporate asking them to address this situation.
Maybe if all sellers send them emails, they will at least communicate SOMETHING
about the situation. It is really poor business practice to have this problem
continuing for so long when you have sellers paying fees every month.
In General, uticabrix writes:
| In General, bricksinbloom writes:
| How long on average is it taking for the help desk to respond?
My account is currently sitting with two nss despite providing bricklink with
the details it needs to remove them.
In the past it would be sorted overnight but it's been about 2 weeks I believe.
I'm scared to open a new ticket in case it goes back to the end of the queue
again
|
You would think the would get more staffing and more updated platform since some
of us spend over $600 a month for this service.
|
|
|
|
Author: | randyf | Posted: | Apr 15, 2024 15:42 | Subject: | Re: Inventory Change Request for Set 3508-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Change 10 Part Black {2493 Window 1 x 4 x 5 (Undetermined Type) to 2493b Window 1 x 4 x 5 with Hollow Studs}
Comments from Submitter:
From sealed set images provided by member zorbanj.
|
|
|
Author: | randyf | Posted: | Apr 15, 2024 15:39 | Subject: | Inventory Change Request for Set 3508-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 10 Part Black {2493 Window 1 x 4 x 5 (Undetermined Type) to 2493b Window 1 x 4 x 5 with Hollow Studs}
Comments from Submitter:
From sealed set images provided by member zorbanj.
|
|
Author: | randyf | Posted: | Apr 15, 2024 15:21 | Subject: | Re: Inventory Change Request for Set 70401-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Delete 1 Part 30237 Dark Bluish Gray Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) (match ID 1)
* Add 1 Part 30237a Dark Bluish Gray Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip) (match ID 1)
Comments from Submitter:
If alternate item is the round clip the real alternative to the undetermined clip is the U clip. Plus I own a copy of this set and the u clip is the one included.
|
Request accepted.
30237a shown in the unboxing and build here:
https://youtu.be/XZcXG0lg9Tk?t=123
|
|
|
Author: | randyf | Posted: | Apr 15, 2024 14:57 | Subject: | Re: Inventory Change Request for Set 1295-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Delete 1 Part 6152 Trans-Dark Blue Windscreen 6 x 4 x 1 1/3 (Undetermined Type)
* Add 1 Part 6152a Trans-Dark Blue Windscreen 6 x 4 x 1 1/3 with Bottom Tabs and Hollow Studs
Comments from Submitter:
Item picture shows hollow stud variant. Brick set does as well. Pic to follow.
|
Variants have to be proven with sealed set contents or sets that were previously
new and never mixed with other parts. We do not accept evidence from set images
or instructions.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 15, 2024 14:56 | Subject: | Re: Inventory Change Request for Set 6465-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Delete 1 Part 6152 Trans-Dark Blue Windscreen 6 x 4 x 1 1/3 (Undetermined Type)
* Delete 1 Part 6152 White Windscreen 6 x 4 x 1 1/3 (Undetermined Type)
* Add 1 Part 6152a Trans-Dark Blue Windscreen 6 x 4 x 1 1/3 with Bottom Tabs and Hollow Studs
* Add 1 Part 6152a White Windscreen 6 x 4 x 1 1/3 with Bottom Tabs and Hollow Studs
Comments from Submitter:
As you can see in the item pic the hollow stud variant can be see for both parts. Also if you look at a different image from brick set you can also the the hollow stud. Unfortunately there are no videos that I could find on this set.
|
Variants have to be proven with sealed set contents or sets that were previously
new and never mixed with other parts. We do not accept evidence from set images
or instructions.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 15, 2024 12:32 | Subject: | Re: Color name tweak | Viewed: | 38 times | Topic: | Catalog | |
| In Catalog, Skafte writes:
| In Catalog, Admin_Russell writes:
Hi, sorry to dig up an old thread, but the blue iridescent one I have is definitely
not Bright Light Blue, the coating is put on a Medium Blue brick. All pics I
can find seem to be Medium Blue as well, they do not get brighter or lighter
by the coating.
I propose a name change for this gear (Key Chain 853993)
from
2 x 4 Brick - Bright Light Blue with Iridescent Coating Key Chain
to
2 x 4 Brick - Medium Blue with Iridescent Coating Key Chain
Thanks
|
I agree. It is definitely darker than Sweet Mayhem's hair piece which really
is Bright Light Blue. I have updated the item name.
|
|
Author: | randyf | Posted: | Apr 15, 2024 12:26 | Subject: | Re: Inventory Change Request for Set 70400-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Delete 3 Part 3794 Tan Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (Alternate) (match ID 1)
Comments from Submitter:
I don’t know how this works but if you think about it, a undetermined type can’t be a alternate item.
|
This is not how it works.
|
|
Author: | randyf | Posted: | Apr 15, 2024 12:24 | Subject: | Re: Inventory Change Request for Minifigure dp095 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, 1001bricks writes:
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, axaday writes:
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Delete 1 Part 15875c00pb031 Bright Light Blue Mini Doll Hips and Skirt Full Length with Metallic Light Blue Bow and Silver Sparkles with Light Aqua Insert Pattern - Undetermined Hinge
* Add 1 Part 36187c00pb003 Bright Light Blue Mini Doll Hips and Skirt Full Length with Metallic Light Blue Bow and Silver Sparkles with Light Aqua Insert Pattern - Thin Hinge
Comments from Submitter:
As you can see in the picture it is clearly the thin variant.
|
That isn't how it works. That is the undetermined entry and has the picture
that it had when we realized it needed to be split. That picture is almost certainly
not from one of the foil packs.
I have the foil packs in a shopping cart and I am waiting for my sales tax waiver
to be approved.
|
So, does that mean you are going to fix it?
|
Now I don't understand why they'd fix an obsolete entry to be deleted.
Again: "This catalog entry is obsolete and will be marked for deletion
once it is removed from all inventories."
Also, I'm sure there are more actual valid entries to fix if they've
got some time
|
There is nothing to fix for
The two current set inventories containing it need to be checked to see if they
should actually have
or
Once those two set inventories are checked and dp095 is removed from them in
favor of dp095a or dp095b, then dp095 will be marked for deletion.
Hope that clears it up.
|
|
Author: | randyf | Posted: | Apr 15, 2024 12:07 | Subject: | Re: Sticker identification | Viewed: | 32 times | Topic: | Catalog Identification | |
| In Catalog Identification, ZwarteMagica writes:
| Please help me find the following stickers. They are probably on the wrong pieces
or not in the catalog at all. Please point me to the correct stickersheet.
Thank you!
|
Looks like some of them may come from these:
|
|
Author: | randyf | Posted: | Apr 15, 2024 12:00 | Subject: | Re: LED Key Light Darth Vader Key Chain Boxed | Viewed: | 27 times | Topic: | Catalog Identification | |
| In Catalog Identification, QBricks writes:
| I sold what I had listed as 825068 LED Key Light Darth Vader Key Chain (LEDLITE)
- Boxed Version today but the ones I have are actually a tagged version LGL-KE7T.
The tagged version in the catalogue is LGL-KE7H. I'm waiting to hear back
from the buyer to see if they still want it.
The catalogue says the tagged version was released in 2020 but I've had mine
since 2011. Does anyone know of a name change and if "boxed version"
was added to the name at some point? I listed them too long ago to remember what
the name of the item was at the time.
|
had its name changed from "Mini Torch Minifig Flashlight Key Chain Darth
Vader" to "LED Key Light Darth Vader Key Chain (LEDLITE) - Boxed Version"
in 2013, and the images of the boxes were added after the original entry. Therefore,
it is highly possible that this entry was originally for the tagged version of
the key chain from 2011 that you have and then later inappropriately redefined
to be the boxed version. When the updated tagged version came along in 2020,
it only made sense to add it as the tagged version then because the other one
had stated "Boxed Version" for so long.
I think you did the right thing by reaching out to the buyer.
| The tag on mine is different to the one in the catalogue and it also has a white
tag with instructions on how to replace the batteries. That tag says z11175 v1,
8/02/11.
|
|
|
Author: | randyf | Posted: | Apr 14, 2024 17:08 | Subject: | Re: 30118pb03 - Add known color - Light Gray | Viewed: | 45 times | Topic: | Catalog | |
| In Catalog Requests, custommike writes:
| Picture on the catalog is of a light gray piece but no known color information
is listed.
|
If that part ever appeared in a set, then it would need to be added to the set
to get known color information to show up.
However, I think it is just the print from
* | | 30119pb01 Wing Plate Bi-level 8 x 4 and 2 x 3 1/3 Down with Silver/Orange/Black UFO Logo Pattern Parts: Wing |
printed on the wrong part.
In that case, the part should probably not even be in the catalog.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 14, 2024 00:08 | Subject: | Re: Inventory Change Request for Set 42163-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Change {2 to 3} Part Black 3873 Technic, Link Tread (Extra)
Comments from Submitter:
Just opened a sealed copy and there where 3 extras.
|
I think you got lucky.
I watched multiple unboxing and build videos of the set and compared them all
to the current inventory which was also compiled from a sealed set. All of them
only showed two extra treads. Since most people part out sets blindly with the
extra pieces included, it is best to keep the inventory as is for the most common
case.
Therefore, I have decided not to accept this change.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 14, 2024 00:02 | Subject: | Re: Inventory Change Request for Set 8486-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
| In Inventories Requests, Fractal0 writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Fractal0 writes:
| Please make changes to the following inventory:
* Delete 2 Part 3245bpb23 Red Brick 1 x 2 x 2 with Inside Axle Holder with '95' Pattern (Sticker) - Set 8486 (Counterpart)
Comments from Submitter:
just built this set and the BL inventory says there are 2 x 3245cpb187 and 2 x 3245bpb23. These are actually mould variations and there are only 2 of one or the other, not both. The other two 1 x 2 x 2 red bricks do not have stickers.
|
This request will not be accepted.
It is correct that there are four red 1x2x2 bricks in the set and that two of
them use stickers. However, since the four red 1x2x2 bricks in the set can be
either of two variants (3245b or 3245c), then the two of them that use stickers
can be either of two variants (3245b or 3245c). The Counterparts area shows that
both variants of the bricks with stickers can be found in any given used set.
Cheers,
Randy
|
Wouldn't the two 3245cpb187 stickered bricks go in the alternate section?
Thats where they put the 4 3245c bricks. I accidently said "delete" but
meant "moved to alternate". Sorry for the confusion.
|
Counterparts never go in the Alternate Items section. The Counterparts section
does not always have a one-to-one correspondence to parts in the Regular Items
section. It is basically a dumping ground for catalog items that may be found
in any used example of the set.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 13, 2024 23:46 | Subject: | Re: Inventory Change Request for Set 8486-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, Fractal0 writes:
| Please make changes to the following inventory:
* Delete 2 Part 3245bpb23 Red Brick 1 x 2 x 2 with Inside Axle Holder with '95' Pattern (Sticker) - Set 8486 (Counterpart)
Comments from Submitter:
just built this set and the BL inventory says there are 2 x 3245cpb187 and 2 x 3245bpb23. These are actually mould variations and there are only 2 of one or the other, not both. The other two 1 x 2 x 2 red bricks do not have stickers.
|
This request will not be accepted.
It is correct that there are four red 1x2x2 bricks in the set and that two of
them use stickers. However, since the four red 1x2x2 bricks in the set can be
either of two variants (3245b or 3245c), then the two of them that use stickers
can be either of two variants (3245b or 3245c). The Counterparts area shows that
both variants of the bricks with stickers can be found in any given used set.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 13, 2024 20:44 | Subject: | Re: 42163 extra parts | Viewed: | 39 times | Topic: | Catalog | |
| In Catalog, Saitobricks.ca writes:
| Just bought one copy of the set and received 3 spare,
Should I make a inventory change request?
|
If you built it correctly, then yes.
|
|
Author: | randyf | Posted: | Apr 13, 2024 11:22 | Subject: | Re: Item names cut off | Viewed: | 28 times | Topic: | Catalog Identification | |
| In Catalog Identification, Admin_Russell writes:
| In Catalog Identification, Admin_Russell writes:
| In Catalog Identification, Admin_Russell writes:
| In Catalog Identification, axaday writes:
| In Catalog Identification, joshbeagrie writes:
presumably
| after "with groove" was removed.
|
That's what the change log shows. Sloppy copy and pasting.
|
No, the public form cuts off at 150 characters. The full name is pasted into
the form, straight from the list of downloaded item names.
Once the project is done, we will check all item names for this cuttoff and repair
them. Between now and then, if you see issues, feel free to correct them.
|
Here are the remaining parts with names cut off - see the letters in red.
|
Finshed. Please let me know if you see others.
|
👍
|
|
Author: | randyf | Posted: | Apr 13, 2024 11:15 | Subject: | Re: Inventory Change Request for Set 30378-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, gvbricks writes:
| Please make changes to the following inventory:
* Add 1 Part 3673 Light Bluish Gray Technic, Pin without Friction Ridges (Extra)
* Add 1 Part 4073 Yellow Plate, Round 1 x 1 (Extra)
* Change {3 to 2} Part Light Bluish Gray 3673 Technic, Pin without Friction Ridges
Comments from Submitter:
partout / building instruction
|
3x
are all needed in Step 7.
Since these requests were already accepted by someone else, the inventory will
need to be updated once more.
|
I should not do catalog work from my mobile phone.
The extra part is correct, though:
https://youtu.be/hbST_d7NBCI?t=33
https://youtu.be/jzf38kKBm0Y?t=72
|
I had found evidence already that the extras were correct. I just wanted to give
the OP the chance to add them.
|
|
Author: | randyf | Posted: | Apr 13, 2024 11:02 | Subject: | Re: Inventory Change Request for Set 6253-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Change 1 Part Black 48002a Boat, Mast 2 x 2 x 20 with Holes and Axle Hole (x Shape / + Orientation) {Alternate to Regular}
* Change 1 Part Black 48002b Boat, Mast 2 x 2 x 20 with Holes and Axle Hole (x Shape / x Orientation) {Regular to Alternate}
Comments from Submitter:
This set cannot be built with 48002b. It must have the '+' orientation, so I am moving 48002a to the Regular Items section. The inclusion of 48002b in the inventory is most likely an error.
|
|
|
|
Author: | randyf | Posted: | Apr 13, 2024 11:02 | Subject: | Inventory Change Request for Set 6253-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black 48002a Boat, Mast 2 x 2 x 20 with Holes and Axle Hole (x Shape / + Orientation) {Alternate to Regular}
* Change 1 Part Black 48002b Boat, Mast 2 x 2 x 20 with Holes and Axle Hole (x Shape / x Orientation) {Regular to Alternate}
Comments from Submitter:
This set cannot be built with 48002b. It must have the '+' orientation, so I am moving 48002a to the Regular Items section. The inclusion of 48002b in the inventory is most likely an error.
|
|
Author: | randyf | Posted: | Apr 12, 2024 14:31 | Subject: | Re: Inventory Change Request for Set 30378-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, gvbricks writes:
| Please make changes to the following inventory:
* Add 1 Part 3673 Light Bluish Gray Technic, Pin without Friction Ridges (Extra)
* Add 1 Part 4073 Yellow Plate, Round 1 x 1 (Extra)
* Change {3 to 2} Part Light Bluish Gray 3673 Technic, Pin without Friction Ridges
Comments from Submitter:
partout / building instruction
|
3x
are all needed in Step 7.
Since these requests were already accepted by someone else, the inventory will
need to be updated once more.
Cheers,
Randy
|
|
|
Author: | randyf | Posted: | Apr 12, 2024 14:22 | Subject: | Re: Inventory Change Request for Set 70413-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, Nubs_Select writes:
| Please make changes to the following inventory:
* Delete 2 Part 30237 Reddish Brown Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) (Alternate) (match ID 2)
* Add 2 Part 30237a Reddish Brown Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip) (Alternate) (match ID 2)
Comments from Submitter:
from watching the build of a brand-new copy of the set. picture to follow. https://youtu.be/TqpY8DbTJls?t=118
|
30237b shown in the unboxing and build here:
https://youtu.be/CWUAspjTr8k?t=180
|
|
|
Author: | randyf | Posted: | Apr 12, 2024 13:35 | Subject: | Re: Quality control issues | Viewed: | 52 times | Topic: | General | |
| In General, WildBricks writes:
| So either the kid who this collection came from is unusually strong or LEGO is
having some serious quality control issues. I've found more broken parts
in this lot than I've ever seen before. I've got plates and bricks from
30+ years ago that have held up better than these parts from under 7 years ago.
Anyone else seeing an increase in damaged parts from newer bulk used purchases?
|
Completely common in the modern era, unfortunately.
|
|
Author: | randyf | Posted: | Apr 12, 2024 13:31 | Subject: | Re: Window 1 x 4 x 5 with Hollow Studs Item 2493b | Viewed: | 39 times | Topic: | Colors | |
| In Colors, Aquilon writes:
| Hi everybody
I want to enter this part Window 1 x 4 x 5 with Hollow Studs Item No: 2493b
in my collection but the color I have does not exist. My part is black. I don't
know which set it comes from but I saw on https://rebrickable.com/home/ that
there are at least 9 sets in which it takes place in black. How can I do ?
Thanks.
|
It most likely comes from one or more of the following sets:
https://www.bricklink.com/catalogItemIn.asp?P=2493&colorID=11&in=A
that currently contains
When someone can prove definitively that any of those sets came with the hollow-stud
version of the window, then we can update the inventories to show that. This
will then trigger the color "Black" to show up on the catalog page for
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 12, 2024 13:22 | Subject: | Re: Honey, where are my Pants? | Viewed: | 36 times | Topic: | Catalog Identification | |
| In Catalog Identification, novabrick writes:
| Hello there!
Could we maybe start giving Legs a bit more descriptive names?
|
These days, almost everything gets a very descriptive name, but that was not
always the case. Having said that, everyone is free to submit name change requests
on anything that they find lacking in description, and that has always been the
case.
https://www.bricklink.com/catalogReq.asp
Cheers,
Randy
| Items like:
are a bit hard to find for people who haven't memorized the whole catalog
of Star Wars Characters and Uniforms.
Thanks you for your consideration.
Christian
novabrick-team
|
|
|
Author: | randyf | Posted: | Apr 12, 2024 05:29 | Subject: | Re: Inventory Change Request for Set 70410-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, Nubs_Select writes:
| Please make changes to the following inventory:
* Delete 1 Part 30237 Reddish Brown Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) (Alternate) (match ID 1)
* Add 1 Part 30237a Reddish Brown Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip) (Alternate) (match ID 1)
Comments from Submitter:
from watching the build of a brand-new copy of the set. picture to follow. https://youtu.be/g57PeKPW8T8?t=81
|
30237b shown in the unboxing and build here:
https://youtu.be/r69wX0Uilgc?t=117
|
|
|
Author: | randyf | Posted: | Apr 12, 2024 05:15 | Subject: | Re: Inventory Change Request for Set 70409-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, Nubs_Select writes:
| Please make changes to the following inventory:
* Delete 1 Part 30237 Reddish Brown Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) (Alternate) (match ID 1)
* Add 1 Part 30237a Reddish Brown Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip) (Alternate) (match ID 1)
Comments from Submitter:
from watching the build of a brand-new copy of the set. picture to follow. https://youtu.be/gl2y0s5sERQ?t=159
|
30237b shown in the unboxing and build here:
https://youtu.be/EtOEutsTX-4?t=56
|
|
|
Author: | randyf | Posted: | Apr 11, 2024 22:31 | Subject: | Re: Inventory Change Request for Set 75903-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, Nubs_Select writes:
| In Inventories Requests, Nubs_Select writes:
| Please make changes to the following inventory:
* Delete 1 Part 30237 Reddish Brown Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) (Alternate) (match ID 1)
* Add 1 Part 30237a Reddish Brown Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip) (Alternate) (match ID 1)
Comments from Submitter:
from watching the build of a brand-new copy of the set. picture to follow. https://youtu.be/6al2aT-zItE?t=154
|
|
30237b shown in the unboxing and build here:
https://youtu.be/DgVMVMEhzAU?t=100
|
|
|
Author: | randyf | Posted: | Apr 11, 2024 22:04 | Subject: | Re: Inventory Change Request for Set 10687-1 | Viewed: | 30 times | Topic: | Inventories Requests | |
| In Inventories Requests, Nubs_Select writes:
| In Inventories Requests, Nubs_Select writes:
| Please make changes to the following inventory:
* Delete 1 Part 30237 Red Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) (Alternate) (match ID 1)
* Add 1 Part 30237a Red Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip) (Alternate) (match ID 1)
Comments from Submitter:
from watching the build of a brand-new copy of the set. picture to follow. https://youtu.be/e5A4B2elSuA?t=269
|
|
30237b shown in the unboxing and build here:
https://youtu.be/NBPG9enZr1Y?t=108
|
|
|
Author: | randyf | Posted: | Apr 11, 2024 15:33 | Subject: | Re: Stickers Package Type | Viewed: | 33 times | Topic: | Catalog | |
| In Catalog, Give.Me.A.Brick writes:
| In Catalog, randyf writes:
| In Catalog, Give.Me.A.Brick writes:
| Sorry if I have missed something, but who and why is changing Stickers Package
Type from Weight To Volume Bound thus making Instant Checkout unavailable?
Thank you.
|
All paper items in the catalog should be set to Volume Bound according to our
guidelines. Any new sticker sheets, cardboard items, etc. added to the catalog
get set to Volume Bound from the beginning, but ones that we come across in our
travels through the catalog that need to get updated get updated. To solve your
issue, you have a couple of choices. You can change them in your personal store
settings to "Weight Bound"
|
In this last batch of 100+ stickers whose package types were changed to Volume
Bound, many, if not most, of them, I had already set them manually to Weight
Bound in my store. Usually, as soon as I add them to my inventory.
Not something you have control over but I don't think these changes should
override my initial settings.
|
You are right. They definitely should not override your initial settings. If
they do, then that is another "feature" that should be addressed.
|
| or you can add the packing dimensions of the
sticker sheets causing the issues to the catalog.
Cheers,
Randy
|
|
|
|
Author: | randyf | Posted: | Apr 11, 2024 14:04 | Subject: | Re: Stickers Package Type | Viewed: | 39 times | Topic: | Catalog | |
| In Catalog, Give.Me.A.Brick writes:
| Sorry if I have missed something, but who and why is changing Stickers Package
Type from Weight To Volume Bound thus making Instant Checkout unavailable?
Thank you.
|
All paper items in the catalog should be set to Volume Bound according to our
guidelines. Any new sticker sheets, cardboard items, etc. added to the catalog
get set to Volume Bound from the beginning, but ones that we come across in our
travels through the catalog that need to get updated get updated. To solve your
issue, you have a couple of choices. You can change them in your personal store
settings to "Weight Bound" or you can add the packing dimensions of the
sticker sheets causing the issues to the catalog.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 11, 2024 13:56 | Subject: | Re: Merge alarm clocks | Viewed: | 44 times | Topic: | Catalog Requests | |
| In Catalog Requests, TakeAbricK writes:
| In Catalog Requests, Saitobricks.ca writes:
| Please merge,
[G=LG11006]
[G=LG11009]
into one entry, with diffent colour options.
Reason, all item are the same, only difference is colour.
|
I'm not 100% confident with this one, for the images don't show all sides,
so there could be differences the images don't show. Like these are different
also (different on the BL images that is).
[g=LG11007]
I found images online though, which do look the same as the other 3. So the BrickLink
image could be a render from a catalog or website and not represent the actual
item.
And then those will be left to merge just because of black instead of white printing.
[g=N10746]
[g=LG11012]
|
You already merged the pocket photo albums that had different printing colors,
so I don't know what the difference would be here.
| I didn't have time to look for more differences.
Although I appreciate it very much that you are looking into this, I would also
appreciate it if you would wait with more requests like these. We already know
that there are more items that can be merged for the same reason, but doing that
takes a lot of time.
The actual merge doesn't take much time.
But before we can merge we have to check if they are indeed 100% the same (except
for the color), then save all info and images of the items that are going to
be merged. All wanted lists and items for sale have to be updated.
And after the merge all this info and images have to be added manually.
So it's not just pressing a button
|
|
|
Author: | randyf | Posted: | Apr 10, 2024 13:50 | Subject: | Re: Item names cut off | Viewed: | 26 times | Topic: | Catalog Identification | |
| In Catalog Identification, joshbeagrie writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, Dhobeck writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, joshbeagrie writes:
| Hi,
I have noticed a few of the HP dots have had the end of their name cut off, presumably
after "with groove" was removed. It's on quite a few of them.
This makes these ones unsearchable for example Deathly Hallows will not show
up because it is "Hall" instead.
Not sure if any other entries are like this I have just noticed on the dots as
I created them.
3070pb289 - 321
* | | 3070pb315 Tile 1 x 1 with Black Triangle, Line, and Circle Symbol, Bright Light Blue and Dark Bluish Gray Dots and Sparkles Pattern (HP Sign of the Deathly Hallows) Parts: Tile, Decorated {White} |
Do I need to submit name change requests to all that need fixed?
Josh
|
Just post here which ones need to be updated and I can fix them behind the scenes
very quickly. The one above has been fixed.
Cheers,
Randy
|
And also these
* | | 3070pb296 Tile 1 x 1 with Bright Light Blue Potion Vial with Gold Stopper and Dots and Sparkles on Dark Purple Background Pattern (HP Felix Felicis / Liquid Luck) Parts: Tile, Decorated {White} |
* | | 3070pb304 Tile 1 x 1 with Female Witch Head with Smile, Black Hat and Glasses, and Light Bluish Eyebrows and Hair on Coral Background Pattern (HP Minerva McGonagall) Parts: Tile, Decorated {White} |
|
Also, both now fixed. Thanks again!
|
That's them all fixed thanks Randy
|
Wonderful! 👍
Let me know if you find anymore cut off names.
|
|
Author: | randyf | Posted: | Apr 9, 2024 21:51 | Subject: | Re: Add fig for MetalBeard's Sea Cow set 70810 | Viewed: | 38 times | Topic: | Catalog | |
| In Catalog Requests, Saitobricks.ca writes:
| Please add Metalbeard figure for set
|
This forum topic should only be used for things that cannot be handled through
the standard forms and processes that are available to everyone.
If someone wants to add him to the catalog, they can start here:
https://www.bricklink.com/wantedCatalog.asp?catType=M
Cheers,
Randy
|
|
Author: | randyf | Posted: | Apr 9, 2024 21:03 | Subject: | Re: Item names cut off | Viewed: | 33 times | Topic: | Catalog Identification | |
| In Catalog Identification, Saitobricks.ca writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, Saitobricks.ca writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, joshbeagrie writes:
| Hi,
I have noticed a few of the HP dots have had the end of their name cut off, presumably
after "with groove" was removed. It's on quite a few of them.
This makes these ones unsearchable for example Deathly Hallows will not show
up because it is "Hall" instead.
Not sure if any other entries are like this I have just noticed on the dots as
I created them.
3070pb289 - 321
* | | 3070pb315 Tile 1 x 1 with Black Triangle, Line, and Circle Symbol, Bright Light Blue and Dark Bluish Gray Dots and Sparkles Pattern (HP Sign of the Deathly Hallows) Parts: Tile, Decorated {White} |
Do I need to submit name change requests to all that need fixed?
Josh
|
Just post here which ones need to be updated and I can fix them behind the scenes
very quickly. The one above has been fixed.
Cheers,
Randy
|
Thanks to the most diligent admin
|
Thank you. I have an amazing team of fellow admins to work worth, and this site
would not be the same without all of their hard work, too. Combined, the small
lot of us get a lot accomplished. I am just the one who happens to be around
right now.
|
Maybe that’s because your always working
|
Just on the same continent as you. All of the other admins are in Europe and
hopefully sleeping right now.
|
|
Author: | randyf | Posted: | Apr 9, 2024 20:59 | Subject: | Re: Item names cut off | Viewed: | 33 times | Topic: | Catalog Identification | |
| In Catalog Identification, Dhobeck writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, joshbeagrie writes:
| Hi,
I have noticed a few of the HP dots have had the end of their name cut off, presumably
after "with groove" was removed. It's on quite a few of them.
This makes these ones unsearchable for example Deathly Hallows will not show
up because it is "Hall" instead.
Not sure if any other entries are like this I have just noticed on the dots as
I created them.
3070pb289 - 321
* | | 3070pb315 Tile 1 x 1 with Black Triangle, Line, and Circle Symbol, Bright Light Blue and Dark Bluish Gray Dots and Sparkles Pattern (HP Sign of the Deathly Hallows) Parts: Tile, Decorated {White} |
Do I need to submit name change requests to all that need fixed?
Josh
|
Just post here which ones need to be updated and I can fix them behind the scenes
very quickly. The one above has been fixed.
Cheers,
Randy
|
And also these
* | | 3070pb296 Tile 1 x 1 with Bright Light Blue Potion Vial with Gold Stopper and Dots and Sparkles on Dark Purple Background Pattern (HP Felix Felicis / Liquid Luck) Parts: Tile, Decorated {White} |
* | | 3070pb304 Tile 1 x 1 with Female Witch Head with Smile, Black Hat and Glasses, and Light Bluish Eyebrows and Hair on Coral Background Pattern (HP Minerva McGonagall) Parts: Tile, Decorated {White} |
|
Also, both now fixed. Thanks again!
|
|
Author: | randyf | Posted: | Apr 9, 2024 20:53 | Subject: | Re: Item names cut off | Viewed: | 32 times | Topic: | Catalog Identification | |
| In Catalog Identification, Dhobeck writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, joshbeagrie writes:
| Hi,
I have noticed a few of the HP dots have had the end of their name cut off, presumably
after "with groove" was removed. It's on quite a few of them.
This makes these ones unsearchable for example Deathly Hallows will not show
up because it is "Hall" instead.
Not sure if any other entries are like this I have just noticed on the dots as
I created them.
3070pb289 - 321
* | | 3070pb315 Tile 1 x 1 with Black Triangle, Line, and Circle Symbol, Bright Light Blue and Dark Bluish Gray Dots and Sparkles Pattern (HP Sign of the Deathly Hallows) Parts: Tile, Decorated {White} |
Do I need to submit name change requests to all that need fixed?
Josh
|
Just post here which ones need to be updated and I can fix them behind the scenes
very quickly. The one above has been fixed.
Cheers,
Randy
|
Found these
* | | 3070pb289 Tile 1 x 1 with Male Head with Smile, Black Eyebrows, Glasses, and Hair, and Medium Nougat Lightning Bolt Scar on Coral Background Pattern (HP Harry Potter) Parts: Tile, Decorated {White} |
* | | 3070pb310 Tile 1 x 1 with Female Head with Smile, Bright Yellow Hair, and Medium Nougat Spectrespecs Glasses on Bright Light Blue Background Pattern (HP Luna Lovegood) Parts: Tile, Decorated {White} |
|
Both fixed. Thank you!
|
|
Author: | randyf | Posted: | Apr 9, 2024 20:51 | Subject: | Re: Item names cut off | Viewed: | 36 times | Topic: | Catalog Identification | |
| In Catalog Identification, Saitobricks.ca writes:
| In Catalog Identification, randyf writes:
| In Catalog Identification, joshbeagrie writes:
| Hi,
I have noticed a few of the HP dots have had the end of their name cut off, presumably
after "with groove" was removed. It's on quite a few of them.
This makes these ones unsearchable for example Deathly Hallows will not show
up because it is "Hall" instead.
Not sure if any other entries are like this I have just noticed on the dots as
I created them.
3070pb289 - 321
* | | 3070pb315 Tile 1 x 1 with Black Triangle, Line, and Circle Symbol, Bright Light Blue and Dark Bluish Gray Dots and Sparkles Pattern (HP Sign of the Deathly Hallows) Parts: Tile, Decorated {White} |
Do I need to submit name change requests to all that need fixed?
Josh
|
Just post here which ones need to be updated and I can fix them behind the scenes
very quickly. The one above has been fixed.
Cheers,
Randy
|
Thanks to the most diligent admin
|
Thank you. I have an amazing team of fellow admins to work worth, and this site
would not be the same without all of their hard work, too. Combined, the small
lot of us get a lot accomplished. I am just the one who happens to be around
right now.
|
|
Author: | randyf | Posted: | Apr 9, 2024 20:23 | Subject: | Re: Item names cut off | Viewed: | 41 times | Topic: | Catalog Identification | |
| In Catalog Identification, joshbeagrie writes:
| Hi,
I have noticed a few of the HP dots have had the end of their name cut off, presumably
after "with groove" was removed. It's on quite a few of them.
This makes these ones unsearchable for example Deathly Hallows will not show
up because it is "Hall" instead.
Not sure if any other entries are like this I have just noticed on the dots as
I created them.
3070pb289 - 321
* | | 3070pb315 Tile 1 x 1 with Black Triangle, Line, and Circle Symbol, Bright Light Blue and Dark Bluish Gray Dots and Sparkles Pattern (HP Sign of the Deathly Hallows) Parts: Tile, Decorated {White} |
Do I need to submit name change requests to all that need fixed?
Josh
|
Just post here which ones need to be updated and I can fix them behind the scenes
very quickly. The one above has been fixed.
Cheers,
Randy
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|