Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | 1977_mauro  | | Posted: | Feb 13, 2024 01:22 | | Subject: | Re: Variant Merge - How do I sort this out | | Viewed: | 59 times | | Topic: | Catalog | |
|
| What I noticed during parting out a set:
- When I go to the first part out screen, the system notifies me that some
of the parts to be parted out are already in my inventory
- As I want to consolidate them, this is perfectly fine
- But on the next screen before final confirmation the parts for which already
existing lots have a comment (e.g. 7 teeth) are now shown as new lots and will
be created exactly as new lots
This is very bad and I don't understand the difference why the system recognizes
the same lots on the first scheen but then finally does not merge these lots?
Do I miss something?
|
 |
| Author: | 1977_mauro | | Posted: | Feb 12, 2024 13:23 | | Subject: | Re: Differenzbesteuerung | | Viewed: | 79 times | | Topic: | LANG Deutsch | |
|
| Normal kauft man ja Sets ein, das ist der Eingang, dann verkauft man die Steine
daraus, das ist der Ausgang.
Was heißt, der Steuerberater akzeptiert dein Vorgehen nicht? Wird er vom Staat
bezahlt, oder von dir?
Ich würde knallhart den Steuerberater wechseln.
Außer, du hast ein anderes Vorgehen, als oben beschrieben.
Grüße Mauro
In LANG Deutsch, Steineparadies writes:
| | Guten Morgen zusammen.
Ich würde gerne in Erfahrung bringen, wie Ihr die Differenzbesteuerung bei Gebrauchtwaren
ansetzt.
Unser Finanzamt sowie mein Steuerberater akzeptieren mein Vorgehen nicht.
Ich wollte Konto A gegen Konto B rechnen.
Nun soll ich genau aufzeichnen, woher ich welchen Stein habe und zu welchem Preis
ich diesen eingekauft habe. WTF, wie soll ich das anstellen? Es gibt einige,
die die Diff anwenden. Wie ist es bei euch?
|
|
|
| Author: | 1977_mauro | | Posted: | Feb 11, 2024 23:12 | | Subject: | Re: Inventory Change Request for Set 8781-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
|
| Oh sorry, I was sure that the minifig had the evil skull as well.
(I thought, I have even checked the minifig...)
I will delete the request.
In Inventories Requests, Turez writes:
| | In Inventories Requests, 1977_mauro writes:
| | Please make changes to the following inventory:
* Add 1 Part 3626bpb0001 White Minifigure, Head Skull Standard Pattern - Blocked Open Stud (Alternate) (match ID 5)
* Change 1 Part White 3626bpx115 Minifigure, Head Skull Evil with Eyebrows, Black Print Pattern - Blocked Open Stud {match ID 0 to 5}
Comments from Submitter:
There were 2 different skulls in the sealed set. The one used in the minifig was 3626bpx115 as inventorized but the loose one was the one I added.
|
The inventory already includes two different skulls. The minifigure has 3626bpb0001
and the loose head is 3626bpx115.
|
|
|
| Author: | 1977_mauro | | Posted: | Feb 11, 2024 05:18 | | Subject: | Inventory Change Request for Set 60093-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 6 Part Dark Bluish Gray {6192 Slope, Curved 2 x 4 Double (Undetermined Type) to 6192b Slope, Curved 2 x 4 Double with Groove}
Comments from Submitter:
From a sealed set.
Batch 27S5.
|
|
| Author: | 1977_mauro | | Posted: | Feb 11, 2024 00:48 | | Subject: | Inventory Change Request for Set 8781-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3626bpb0001 White Minifigure, Head Skull Standard Pattern - Blocked Open Stud (Alternate) (match ID 5)
* Change 1 Part White 3626bpx115 Minifigure, Head Skull Evil with Eyebrows, Black Print Pattern - Blocked Open Stud {match ID 0 to 5}
Comments from Submitter:
There were 2 different skulls in the sealed set. The one used in the minifig was 3626bpx115 as inventorized but the loose one was the one I added.
|
|
| Author: | 1977_mauro | | Posted: | Feb 10, 2024 07:52 | | Subject: | Inventory Change Request for Set 8781-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
* Change 1 Part Black {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Type) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From a sealed set.
|
|
| Author: | 1977_mauro | | Posted: | Feb 9, 2024 06:44 | | Subject: | Re: Pearl dark grey vs black in Part 4073 | | Viewed: | 62 times | | Topic: | General | |
|
| Sorrry but both colors can be very good differentiated for the part 4073.
Ask for photos of your part and the same part in black.
In General, BRCook writes:
| | Hi Bricklinkers,
I had a buyer who purchased 15x 4073 (New) in pearl dark grey (PDG). He sent
me a message today said I had supplied black instead of PDG. I checked my inventory
& I only have PDG in the drawer so I'm confident order was correct. I asked
him to check as difference between black & PDG is subtle. No it is black (offered
to provide photo).
My attitude is no point arguing over a few cents. I source my new parts from
unopened sets or directly from Lego so I can't offer the buyer anything else.
Automatic refund for the item.
I'm interested in other seller's experiences.
Thanks in advance.
Brendan
|
|
|
| Author: | 1977_mauro | | Posted: | Feb 9, 2024 03:05 | | Subject: | Inventory Change Request for Set 7775-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {3 to 2} Part Black 2599sprue Minifigure Footgear Flippers, 2 on Sprue
Comments from Submitter:
2 of them are used in the minifigs, another 2 remained.
The instruction as well clearly shows 4 pairs and not 5 in the part list.
|
|
| Author: | 1977_mauro | | Posted: | Feb 9, 2024 02:42 | | Subject: | Inventory Change Request for Set 7775-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4589b Black Cone 1 x 1 with Top Groove (Alternate) (match ID 6)
* Add 3 Part 4589b Green Cone 1 x 1 with Top Groove (Alternate) (match ID 9)
* Add 1 Part 32064 Yellow Technic, Brick 1 x 2 with Axle Hole (Alternate) (match ID 2)
* Add 4 Part 32064 Dark Red Technic, Brick 1 x 2 with Axle Hole (Alternate) (match ID 10)
* Change 2 Part Black 4589 Cone 1 x 1 {match ID 0 to 6}
* Change 3 Part Green 4589 Cone 1 x 1 {match ID 0 to 9}
* Change 4 Part Dark Red 32064b Technic, Brick 1 x 2 with Axle Hole (x Shape) {match ID 0 to 10}
Comments from Submitter:
My version had 32064 in Dark Red and Yellow, and DBG in 32064b
|
|
| Author: | 1977_mauro | | Posted: | Feb 9, 2024 00:29 | | Subject: | Inventory Change Request for Set 7775-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 48729b Dark Bluish Gray Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side (Alternate) (match ID 6)
* Change 2 Part Dark Bluish Gray {48729 Bar 1L with Clip Mechanical Claw (Undetermined Type) to 48729b Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side} {match ID 6 to 0}
* Change 1 Part Dark Bluish Gray {48729 Bar 1L with Clip Mechanical Claw (Undetermined Type) to 48729b Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side} (Extra)
* Change 2 Part Yellow {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
Comments from Submitter:
From a sealed set. Seal code 28S8
|
|
| Author: | 1977_mauro | | Posted: | Feb 7, 2024 23:45 | | Subject: | Inventory Change Request for Set 6119-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 3044b Red Slope 45 2 x 1 Double with Inside Bar (Alternate) (match ID 2)
* Change 4 Part Red 3044c Slope 45 2 x 1 Double with Bottom Stud Holder {match ID 0 to 2}
Comments from Submitter:
From a sealed set.
|
|
| Author: | 1977_mauro | | Posted: | Feb 7, 2024 01:48 | | Subject: | Inventory Change Request for Set 6396-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3962b Black Minifigure, Utensil Radio with Extended Handle (Alternate) (match ID 16)
* Change 1 Part Black 3962a Minifigure, Utensil Radio with Compact Handle {match ID 0 to 16}
|
|
| Author: | 1977_mauro | | Posted: | Feb 7, 2024 01:37 | | Subject: | Inventory Change Request for Set 6396-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3942p1 White Cone 2 x 2 x 2 with Horizontal Red Stripes Pattern (Alternate) (match ID 15)
* Change 1 Part White 3942bpb01 Cone 2 x 2 x 2 - Blocked Open Stud with Horizontal Red Stripes Pattern {match ID 0 to 15}
Comments from Submitter:
From a sealed set. The copy had the part with open stud and not with blocked stud.
|
|
| Author: | 1977_mauro | | Posted: | Feb 6, 2024 10:16 | | Subject: | Inventory Change Request for Set 8877-1 | | Viewed: | 40 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 3 Part Black {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
Comments from Submitter:
From a sealed set.
|
|
| Author: | 1977_mauro | | Posted: | Feb 2, 2024 05:45 | | Subject: | Inventory Change Request for Set 45401-1 | | Viewed: | 45 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Medium Azure {90509u Minifigure, Utensil Ski 6L (Undetermined Type) to 18744 Minifigure, Utensil Ski 6L (48mm Long)}
Comments from Submitter:
From an open set with sealed polybags.
|
|
| Author: | 1977_mauro | | Posted: | Jan 17, 2024 12:18 | | Subject: | Inventory Change Request for Set 11034-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32606 Dark Pink Plant Flower with Bar and Small Pin Hole (Extra)
Comments from Submitter:
Missed this one during inventorizing of this set.
|
|
| Author: | 1977_mauro | | Posted: | Jan 12, 2024 15:51 | | Subject: | Re: Important proposal regarding catalog variants | | Viewed: | 61 times | | Topic: | Catalog | |
|
| Thanks for clarification, exactly why we shouldn't merge them.
In Catalog, Turez writes:
| | In Catalog, Admin_Russell writes:
| | In Catalog, axaday writes:
| | In Catalog, Admin_Russell writes:
| | These variants are gone because we want them gone. Ty should never have been
added to the catalog in the first place. Other variants of greater importance
will be handled with a more advanced system when (or if) it is built.
|
I am not the king and I don't have the keys. But if I didn't very strongly
disagree concerning 32064c, I wouldn't have spent thousands of dollars tracking
them down for the last few years.
|
What is it about 32064c that is important to you? There is no functional difference,
and I've never seen one of them used so that the bottom of the brick is visible.
There are no transparent colors either.
|
The functional difference is described in the additional note. The inside supports
of 32064c do not fit over a stud, while all other 32064 variants have a bottom
pin that can be placed inside a hollow stud. To illustrate this, the following
assembly can be build with all 32064 variants exept 32064c.
|
|
|
| Author: | 1977_mauro | | Posted: | Jan 12, 2024 13:45 | | Subject: | Re: Important proposal regarding catalog variants | | Viewed: | 60 times | | Topic: | Catalog | |
|
| The answer is simple for that Russell, the old sets have them, the new ones not.
Mauro
In Catalog, Admin_Russell writes:
| | In Catalog, axaday writes:
| | In Catalog, Admin_Russell writes:
| | These variants are gone because we want them gone. They should never have been
added to the catalog in the first place. Other variants of greater importance
will be handled with a more advanced system when (or if) it is built.
|
I am not the king and I don't have the keys. But if I didn't very strongly
disagree concerning 32064c, I wouldn't have spent thousands of dollars tracking
them down for the last few years.
|
What is it about 32064c that is important to you? There is no functional difference,
and I've never seen one of them used so that the bottom of the brick is visible.
There are no transparent colors either.
|
|
|
| Author: | 1977_mauro | | Posted: | Jan 12, 2024 03:07 | | Subject: | Due to the upcoming variants merge do you... | | Viewed: | 196 times | | Topic: | Inventories | | Status: | Open | |
|
| ...still will differentiate the merged variants using the comment field?
Choose:
a) yes
b) no
c) not sure yet
Keep in mind that it won't be visible anymore in the old set inventories
which variant has been used.
Thanks Mauro
|
| Author: | 1977_mauro | | Posted: | Jan 11, 2024 16:02 | | Subject: | Re: Important proposal regarding catalog variants | | Viewed: | 89 times | | Topic: | Catalog | |
|
| But when we remove the variants from the part lists of sets, no one will know
anymore which variants have been used in an older set - this will drop the demand
of such old variants dramatically.
Mauro
|
|
| Author: | 1977_mauro | | Posted: | Jan 4, 2024 08:27 | | Subject: | Inventory Change Request for Set 10664-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 2 Part 3794b Black Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 1)
* Delete 4 Part 3794b Lime Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 2)
* Delete 4 Part 3794b White Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 3)
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)} {match ID 1 to 0}
* Change 4 Part Lime {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)} {match ID 2 to 0}
* Change 4 Part White {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)} {match ID 3 to 0}
Comments from Submitter:
From a sealed set, the 3794b variant is confirmed now.
|
|
| Author: | 1977_mauro | | Posted: | Dec 29, 2023 04:56 | | Subject: | Re: Where do the bricks come from? | | Viewed: | 106 times | | Topic: | General | |
|
| It depends how you did that....
In General, helge writes:
| | In General, Hm79 writes:
| | Hello seniors,
I have a small question: where do the bricks sold in shops in huge quantities
come from? (New bricks of course) Because if you buy from Lego.com, the price
is very expensive, and if you separate it from the sets, it's not feasible...!
Thank you and have a nice weekend!
Hm79
|
Why is it not feasible???
I have been doing that for 20+ years; am I doing something wrong? 
|
|
|
| Author: | 1977_mauro | | Posted: | Dec 29, 2023 04:53 | | Subject: | Re: Where do the bricks come from? | | Viewed: | 85 times | | Topic: | General | |
|
| You answered the question yourself - they are mostly parted out from new sets.
Mauro
In General, Hm79 writes:
| | Hello seniors,
I have a small question: where do the bricks sold in shops in huge quantities
come from? (New bricks of course) Because if you buy from Lego.com, the price
is very expensive, and if you separate it from the sets, it's not feasible...!
Thank you and have a nice weekend!
Hm79
|
|
|
| Author: | 1977_mauro | | Posted: | Dec 17, 2023 10:36 | | Subject: | Inventory Change Request for Set 10273-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2752 Light Bluish Gray Slope, Inverted 33 3 x 2 with Hollow Round Bottom Tube (Alternate) (match ID 3)
* Change 1 Part Light Bluish Gray 3747b Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs {match ID 0 to 3}
Comments from Submitter:
See another request for 10273.
|
|
| Author: | 1977_mauro | | Posted: | Dec 17, 2023 10:03 | | Subject: | Inventory Change Request for Set 10273-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 76959 Light Bluish Gray Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube (Alternate) (match ID 1)
* Add 4 Part 76959 Reddish Brown Slope, Inverted 45 2 x 2 with Hollow Round Bottom Tube (Alternate) (match ID 2)
* Change 2 Part Light Bluish Gray 3660 Slope, Inverted 45 2 x 2 with Flat Bottom Pin {match ID 0 to 1}
* Change 4 Part Reddish Brown 3660 Slope, Inverted 45 2 x 2 with Flat Bottom Pin {match ID 0 to 2}
Comments from Submitter:
From 2 sealed sets, both had the new variants included.
|
|
| Author: | 1977_mauro | | Posted: | Dec 15, 2023 06:23 | | Subject: | Re: Why there‘s brick with wrong color？ | | Viewed: | 51 times | | Topic: | Help | |
|
| I like this one 
"Some illegal LEGO elements (made in LEGO factories during ‘night shift’)"
-- I can imagine LEGO workers mixing all the avilable colors together and
create arbitrary parts with it...
|
|
| Author: | 1977_mauro | | Posted: | Dec 1, 2023 14:38 | | Subject: | Re: Inventory Change Request for Set 910023-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
|
| I deleted the request, I have noticed that even when the instruction shows 1
key we still include 2 keys on sprue as regular parts.
In Inventories Requests, axaday writes:
| | In Inventories Requests, 1977_mauro writes:
| | Please make changes to the following inventory:
* Add 1 Part 40359a Pearl Gold Minifigure, Utensil Key (Extra)
* Change {2 to 3} Part Pearl Gold {40359 Minifigure, Utensil Keys, 2 on Sprue to 40359a Minifigure, Utensil Key}
Comments from Submitter:
The online instruction clearly shows 3 loose keys and not 2 pairs of the keys on the sprue.
|
It would be just the second time a loose key came in a set.
|
|
|
| Author: | 1977_mauro | | Posted: | Nov 20, 2023 01:35 | | Subject: | Re: US $0.01 Fee Amount Due | | Viewed: | 48 times | | Topic: | Problem | |
|
| Thanks! 
In Problem, Admin_Russell writes:
| | In Problem, 1977_mauro writes:
| | Hi all,
I paid my BL fees for the last month but after payment still a balance of US
$0.01 remained.
I paid via PayPal in US $, thus it cannot be a conversion issue.
Now when I try to pay the 1 cent, on the next page it shows 0 cent and I am not
able to do so.
Now the balance turned into red and I will be suspended in the next month.
Who can help out here?
Thanks in advance
Mauro
|
That is a glitch in the system. I have fixed it for you.
|
|
|
| Author: | 1977_mauro | | Posted: | Nov 20, 2023 00:06 | | Subject: | US $0.01 Fee Amount Due | | Viewed: | 95 times | | Topic: | Problem | |
|
| Hi all,
I paid my BL fees for the last month but after payment still a balance of US
$0.01 remained.
I paid via PayPal in US $, thus it cannot be a conversion issue.
Now when I try to pay the 1 cent, on the next page it shows 0 cent and I am not
able to do so.
Now the balance turned into red and I will be suspended in the next month.
Who can help out here?
Thanks in advance
Mauro
|
|
| Author: | 1977_mauro | | Posted: | Nov 17, 2023 05:00 | | Subject: | Re: Do we need a note for this diffetence? | | Viewed: | 30 times | | Topic: | Catalog | |
|
| Thanks Randy!
In Catalog, randyf writes:
| | In Catalog Requests, 1977_mauro writes:
| | Hi Randy,
yes, the one with hole. It is the only difference as I can see.
Cheers
Mauro
In Catalog Requests, randyf writes:
| | In Catalog Requests, 1977_mauro writes:
| | Found in the new Mars Perseverance set.
Mauro
|
Which one was found in the Mars Perseverance set? The one with the hole in the
ball or the one without? Is that the only difference?
Thanks,
Randy
|
|
Thank you, Mauro. This has been completed.
I have added an additional note as well as your comparison image to the item.
Cheers,
Randy
|
|
|
| Author: | 1977_mauro | | Posted: | Nov 14, 2023 22:49 | | Subject: | Re: Do we need a note for this diffetence? | | Viewed: | 36 times | | Topic: | Catalog | |
|
| Hi Randy,
yes, the one with hole. It is the only difference as I can see.
Cheers
Mauro
In Catalog Requests, randyf writes:
| | In Catalog Requests, 1977_mauro writes:
| | Found in the new Mars Perseverance set.
Mauro
|
Which one was found in the Mars Perseverance set? The one with the hole in the
ball or the one without? Is that the only difference?
Thanks,
Randy
|
|
| Author: | 1977_mauro | | Posted: | Oct 18, 2023 15:19 | | Subject: | Re: Do we need a note for this diffetence? | | Viewed: | 36 times | | Topic: | Catalog | |
|
| The mold number is not vible on any of these parts.
In Catalog Requests, TakeAbricK writes:
| | In Catalog Requests, 1977_mauro writes:
| | Found in the new Mars Perseverance set.
Mauro
|
does it have number 50923?
|
|
| Author: | 1977_mauro | | Posted: | Oct 15, 2023 06:41 | | Subject: | Re: Do we need a note for this diffetence? | | Viewed: | 33 times | | Topic: | Catalog | |
|
| I even no found this number on the old part.
Will have a closer look.
In Catalog Requests, TakeAbricK writes:
| | In Catalog Requests, 1977_mauro writes:
| | Found in the new Mars Perseverance set.
Mauro
|
does it have number 50923?
|
|
| Author: | 1977_mauro | | Posted: | Oct 14, 2023 01:49 | | Subject: | Do we need a note for this diffetence? | | Viewed: | 123 times | | Topic: | Catalog | | Status: | Open | |
|
| Found in the new Mars Perseverance set.
Mauro
|
|
|
| Author: | 1977_mauro | | Posted: | Sep 15, 2023 04:23 | | Subject: | Re: Inventory Change Request for Set 10307-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| Then we can add the two hoses and the candle.
By the way, I had less extra 1 x 1 plates in dark bluish as well.
Mauro
In Inventories Requests, jennnifer writes:
| | In Inventories Requests, 1977_mauro writes:
| | Please make changes to the following inventory:
* Add 2 Part 75c12 Dark Bluish Gray Hose, Rigid 3mm D. 12L / 9.6cm (Extra)
* Add 1 Part 37762 Dark Bluish Gray Minifigure, Utensil Candle (Extra)
* Change {1 to 2} Part Tan 3024 Plate 1 x 1 (Extra)
* Change {1 to 2} Part Dark Bluish Gray 20482 Tile, Round 1 x 1 with Bar and Pin Holder (Extra)
Comments from Submitter:
Even I have checked the extra parts twice, I could still have made an error due to the large amount of parts. Please doublecheck.
|
My extras follow the current inventory except for:
I have 5 78258 instead of 7.
I have 8 3024 instead of 9.
I have 2 of 75c12.
I have 1 of 37762.
I have 1 of 3023.
My set actually had another 1 Trans-Clear 4073 in a bag of just Bright Green
24866 and was short one of those. But, I am going to assume that was a packing
error.
~Jen
|
|
|
| Author: | 1977_mauro | | Posted: | Sep 6, 2023 04:20 | | Subject: | Inventory Change Request for Set 76991-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 50945 Black Tire 14mm D. x 6mm Solid Smooth (Extra)
Comments from Submitter:
I have missed this one during inventorizing.
|
|
| Author: | 1977_mauro | | Posted: | Sep 5, 2023 15:21 | | Subject: | Inventory Change Request for Set 10307-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 75c12 Dark Bluish Gray Hose, Rigid 3mm D. 12L / 9.6cm (Extra)
* Add 1 Part 37762 Dark Bluish Gray Minifigure, Utensil Candle (Extra)
* Change {1 to 2} Part Tan 3024 Plate 1 x 1 (Extra)
* Change {1 to 2} Part Dark Bluish Gray 20482 Tile, Round 1 x 1 with Bar and Pin Holder (Extra)
Comments from Submitter:
Even I have checked the extra parts twice, I could still have made an error due to the large amount of parts. Please doublecheck.
|
|
| Author: | 1977_mauro | | Posted: | Aug 6, 2023 16:29 | | Subject: | Re: Inventory Change Request for Part 14518c01pb04 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
| Hi Randy,
but why is then this shark different?
Because it has a pattern?
Thanks
Mauro
In Inventories Requests, randyf writes:
| | In Inventories Requests, 1977_mauro writes:
| | Please make changes to the following inventory: [P=14518c01pb04]
* Change 1 Part {(Variable Color) to Light Bluish Gray} 14518 Shark Body with Gills
Comments from Submitter:
Currently the color is NOT APPLICABLE but should be LIGHT BLUISH GRAY.
|
The inventory is correct as is because the shark is all one color. Thus, this
entry can be reused if they make a complete dark bluish gray shark or complete
white shark, etc.
Cheers,
Randy
|
|
|
| Author: | 1977_mauro | | Posted: | Aug 6, 2023 10:15 | | Subject: | Inventory Change Request for Part 14518c01pb04 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory: [P=14518c01pb04]
* Change 1 Part {(Variable Color) to Light Bluish Gray} 14518 Shark Body with Gills
Comments from Submitter:
Currently the color is NOT APPLICABLE but should be LIGHT BLUISH GRAY.
|
|
| Author: | 1977_mauro | | Posted: | Jul 29, 2023 05:27 | | Subject: | Re: Inventory Change Request for Set 71741-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| How we should procceed here?
In Inventories Requests, 1977_mauro writes:
| | Please make changes to the following inventory:
* Add 1 Part 2540 White Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
* Add 1 Part 3839b White Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
Comments from Submitter:
Both parts are used to build the flying scooter in booklet 3 on page 111:
https://www.lego.com/cdn/product-assets/product.bi.core.pdf/6455444.pdf
|
|
|
| Author: | 1977_mauro | | Posted: | Jul 27, 2023 15:55 | | Subject: | Add alternate part number 62603pb04 to | | Viewed: | 46 times | | Topic: | Catalog Requests | | For: | Catalog Associate | | Status: | Completed | |
|
| ...the part
Like for all other shark bodies 62603 is molded on the part.
Thanks Mauro
|
|
| Author: | 1977_mauro | | Posted: | Jul 24, 2023 05:24 | | Subject: | Re: Inventory Change Request for Set 71741-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| I was wondering as well. This explains a lot. 😉
Mauro
In Inventories Requests, jennnifer writes:
| | In Inventories Requests, 1977_mauro writes:
| | Please make changes to the following inventory:
* Add 1 Part 2540 White Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
* Add 1 Part 3839b White Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
Comments from Submitter:
Both parts are used to build the flying scooter in booklet 3 on page 111:
https://www.lego.com/cdn/product-assets/product.bi.core.pdf/6455444.pdf
|
There are at least 3 versions of Book 3 of these instructions, so obviously LEGO
has been messing with (excuse me, updating) the build.
My original does not have the additional plates.
~Jen
|
|
|
| Author: | 1977_mauro | | Posted: | Jul 22, 2023 00:54 | | Subject: | Inventory Change Request for Set 71741-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 2540 White Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
* Add 1 Part 3839b White Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
Comments from Submitter:
Both parts are used to build the flying scooter in booklet 3 on page 111:
https://www.lego.com/cdn/product-assets/product.bi.core.pdf/6455444.pdf
|
|
| Author: | 1977_mauro | | Posted: | Jul 18, 2023 00:22 | | Subject: | Add alternate mold number 1887... | | Viewed: | 50 times | | Topic: | Catalog Requests | | For: | Catalog Associate | | Status: | Completed | |
|
| to the part:
It came in set:
Even there is no mold number visible on the part, there is a difference in the
inner side, see first photo - the new part on the right side has a round ring
deep inside, during the old version has a hexagon shaped ring.
But there are no differences in the outer side, see further photos in which the
new version is on the right side.
Thanks Mauro
|
|
|
| Author: | 1977_mauro | | Posted: | Jul 17, 2023 07:54 | | Subject: | Re: New part 4308 or an alternative for 77182? | | Viewed: | 33 times | | Topic: | Catalog Requests | |
|
| Thanks to all of you!
In Catalog Requests, TakeAbricK writes:
| | In Catalog Requests, 1977_mauro writes:
| | Thanks Jen, the ribs are another difference, correct.
In Catalog Requests, jennnifer writes:
| | I see slight differences in the notch at the curved front edge and also the ribs
in the middle section.
~Jen
|
|
I have an orange one in my
The white ones are of the old type. These differences are indeed the only differences
without any other functionality. Although it would have been nicer to have the
left version changed at the same time, you should have a very close look to see
the notch difference. I will add the new number as alternate item number.
Thanks,
Diana
|
|
|
| Author: | 1977_mauro | | Posted: | Jul 13, 2023 08:21 | | Subject: | Re: Test | | Viewed: | 41 times | | Topic: | Off Topic | |
|
| Failed...
In Off Topic, cosmicray writes:
|
| Author: | 1977_mauro | | Posted: | Jul 12, 2023 08:32 | | Subject: | Re: New part 4308 or an alternative for 77182? | | Viewed: | 39 times | | Topic: | Catalog Requests | |
|
| Thanks Jen, the ribs are another difference, correct.
In Catalog Requests, jennnifer writes:
| | I see slight differences in the notch at the curved front edge and also the ribs
in the middle section.
~Jen
|
|
|
| Author: | 1977_mauro | | Posted: | Jul 12, 2023 06:27 | | Subject: | New part 4308 or an alternative for 77182? | | Viewed: | 80 times | | Topic: | Catalog Requests | | For: | Catalog Associate | | Status: | Completed | |
|
| Hi,
in set
there is a new variant of part
It has the mold number 4308.
From the pictures I have added it seems that the open side (visible mostly in
the second picture) is a little bit different to the old part.
I don't have any in hand but you can see it here on the left bottom picture:
https://rebrickable.com/parts/77182/slope-curved-10-x-2-x-2-with-curved-end-right/378/
Best regards
Marius
|
|
|
| Author: | 1977_mauro | | Posted: | Jul 7, 2023 15:44 | | Subject: | Re: Additional 2 big parts in 60365-1 | | Viewed: | 21 times | | Topic: | Inventories | |
|
| Thanks for your insights!
In Inventories, 1977_mauro writes:
| | Hi all,
when I was finished with this set:
two parts were left:
and
I checked the building steps twice, no chance that I forgotten them. I checked
the box pictures as well, not found these two parts here as well (By the way,
another one 1 x 4 in medium azure and two 2 x 4 in dark bluish gray are used
in the instruction).
Has someone noticed that as well?
Mauro
|
|
|
| Author: | 1977_mauro | | Posted: | Jul 7, 2023 08:34 | | Subject: | Additional 2 big parts in 60365-1 | | Viewed: | 68 times | | Topic: | Inventories | | Status: | Open | |
|
| Hi all,
when I was finished with this set:
two parts were left:
and
I checked the building steps twice, no chance that I forgotten them. I checked
the box pictures as well, not found these two parts here as well (By the way,
another one 1 x 4 in medium azure and two 2 x 4 in dark bluish gray are used
in the instruction).
Has someone noticed that as well?
Mauro
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Germany, Baden-Württemberg
)
)
)
)
)
)
