Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Emilio_Magnelli  | | Posted: | Mar 10, 2023 02:50 | | Subject: | Flat silver color changed in Pearl light gray | | Viewed: | 92 times | | Topic: | Catalog | | Status: | Open | |
| Hi,
I'm working to add a few bionicle pieces, and I seen that flat silver color
for many pieces was changed in pearl light gray color.
Is this correct? Or is this a bug?
If is correct, is there any messahe that inform sellers about that change?
Sincerely
em
|
| Author: | JLRSextra | | Posted: | Mar 9, 2023 09:35 | | Subject: | 32270 Gear in Dark Gray vs. Light Gray | | Viewed: | 73 times | | Topic: | Catalog | | Status: | Open | |
| I have part 32270 (Technic, Gear 12 Tooth Double Bevel) in old gray - both Dark
Gray and Light Gray. They were clearly two different shades of the old gray colors.
All the Light Gray parts I had sold a long time ago. My Dark Gray gears aren't
moving at all.
Now I see that 32270 doesn't come in Dark Gray - officially. But a few others
have also listed this part in DARK Gray.
Why isn't this part officially listed as Dark Gray?
|
 |
| Author: | sagaku | | Posted: | Mar 9, 2023 01:05 | | Subject: | Parts 90509 and 18744 (minifig skis) | | Viewed: | 59 times | | Topic: | Catalog | | Status: | Open | |
| These two parts are extremely similar!
Couldn't they be collapsed into one part entry? I understand that they technically
have different ID numbers and maybe this means they must have different entries.
I've also been browsing all over the catalog and I've found many part
entries that have "multiple variations" (with more significant differences
than the 1mm difference between these two skis!) and even some with multiple
reference numbers.
Not totally sure how your classification system works here but if there's
room for tightening up, I think collapsing these into one would simplify part
identification with very little downside.
Thanks,
Sam
|
|
| Author: | Ianpugh | | Posted: | Mar 7, 2023 07:47 | | Subject: | part 4025 incorrect dimensions | | Viewed: | 54 times | | Topic: | Catalog | | Status: | Open | |
| Could the dimensions be updated on this part
https://www.bricklink.com/v2/catalog/catalogitem.page?P=4025#T=P
currently showing as 3.2cm high and 1.04cm long/wide, but it is actually 3.2cm
long/wide and 1.04cm high.
currently calculates postage incorrectly for instant checkout as will fit large
letter, does not need small parcel post.
Thanks,
Ian
|
|
| Author: | WoutR | | Posted: | Mar 5, 2023 17:29 | | Subject: | Part 3566 - Transp 2x4 bricks without crssprt | | Viewed: | 142 times | | Topic: | Catalog | | Status: | Open | |
| The new Satin Trans-Clear 2x4 bricks use a new mould with part number 3556.
It looks like this is a new mould for transparent bricks, and I think that we
can expect more transparent brick now LEGO is using MABS plastic and the new
mould has been made.
The mould does not have cross-supports. I guess this will look better when building
with transparent bricks, but it could be confusing in our catalog. Should we
identify this as a 3001 or 3001old (or 3001-something-new), and why?
|
|
|
| Author: | Ellum | | Posted: | Mar 4, 2023 12:33 | | Subject: | Danish promo "board game" from 1982 not on BL | | Viewed: | 86 times | | Topic: | Catalog | | Status: | Open | |
| I have this promo "board game" from 1982 that I want to put up for sale,
but I can't seem to find it. Do these kind of promos not have a place here
on BL or do I just suck at searching?
|
|
| Author: | StarBrick | | Posted: | Mar 4, 2023 05:56 | | Subject: | 60666 - incorrect stud length? | | Viewed: | 78 times | | Topic: | Catalog | | Status: | Open | |
| This part:
is described as:
Cone Half 6 x 4 x 10 (Elliptic Paraboloid)
But it actually is 12.2 studs long, not 10..... (below from Stud.IO)
Please correct?
|
|
| Author: | Jazeyen | | Posted: | Mar 3, 2023 21:33 | | Subject: | 70849-1 Color Change to Part 40938 | | Viewed: | 44 times | | Topic: | Catalog | | Status: | Open | |
| Part 40938, the hair to Rex is always dark brown, but in set 70849-1 it's
listed as reddish brown.
Couldn't get my submission working probably because I just couldn't figure
out the catalog entry.
|
| Author: | normann1974 | | Posted: | Mar 3, 2023 16:57 | | Subject: | Please add part no. | | Viewed: | 76 times | | Topic: | Catalog | | Status: | Open | |
| Please add part no 65570 to
Pick-a-brick currently sells this part in black and white using. I have bought
two of each. The only difference I see is that they're less texturized than
the earlier variant. No part number printed on the part.
/Jan
|
|
| Author: | anathema | | Posted: | Mar 3, 2023 09:20 | | Subject: | Set 2556-1 - year of release? | | Viewed: | 81 times | | Topic: | Catalog | | Status: | Open | |
|
The catalog states this to have been released in 1997. Most - but not all -
other reference sites have this date; some claim 1998.
The copyright date on the box and the instructions is 1998.
The Collector's Guide states it came out in 2000.
Does anyone know which (if any!) of these dates is correct?
|
|
| Author: | rretzler | | Posted: | Mar 3, 2023 08:41 | | Subject: | General question re items being deleted | | Viewed: | 81 times | | Topic: | Catalog | | Status: | Open | |
| I've been a Bricklinker for many years - I joined while my kids were small.
Now that they are grown, I'm trying to organize our LEGO collection. At one
point, we had been trying to collect all of the soccer sets as we are big fans.
I noticed recently in the soccer sets that items related to a promo set were
to be deleted (alternate minifigures for a promo set.) While these items may
not be for sale on BL, they certainly exist - I may even own them, and if I don't,
I want them.
I know that many other sites (and people) consider BL to be the ultimate reference.
So I don't understand why an existing set would be deleted from the BL catalog.
Can anyone give me a good answer about this? Or at least guide me to someone
to whom I can state my case?
If items are being deleted on the site, it doesn't give me a good feeling
about being able to use this as a reference tool for my collection.
Thanks!
|
|
| Author: | Nicolasamico37 | | Posted: | Mar 2, 2023 13:16 | | Subject: | Adding unreleased microfigures ? | | Viewed: | 103 times | | Topic: | Catalog | | Status: | Open | |
| Hi,
I wanted to add the inventory for the unreleased game 50004 Story Mixer, but
2 Microfigures don't exist at all. I know there are unreleased parts and
sets in the catalog. Is it still possible to add these Microfigures and after
that complete the inventory ?
The Instructions already exists with every part number.
Thanks,
Nicolas
|
|
| Author: | Akir | | Posted: | Mar 2, 2023 13:09 | | Subject: | part no. 6218 | | Viewed: | 58 times | | Topic: | Catalog | | Status: | Open | |
| Hey people,
just found a
which has the number 6218 stamped on the bottom. Is that a alternate nr. that
should be added? Got it out of a fleamarket box, so not new, but it clearly says
(c) LEGO, and looks identical to 6259, as far as I can tell.
Cheers!
|
| Author: | alexf72 | | Posted: | Feb 28, 2023 04:45 | | Subject: | item 32505 is listed as similar to 87788 | | Viewed: | 54 times | | Topic: | Catalog | | Status: | Open | |
| Hi,
the catalog lists item 32505 to be a similar mold as 87788, but the are both
rather different. While 32505 is a little bit larger, it does not have an axle
part on the inside to attatch it to another part.
photos:
red mask 32505
golden mask 87788
cheers,
Alex
|
|
| Author: | TitAnick | | Posted: | Feb 27, 2023 11:33 | | Subject: | Scala 3139 | | Viewed: | 75 times | | Topic: | Catalog | | Status: | Open | |
| Hi there
I just got a new scala 3139
The picture refering to the pants is not the right one.
Here is the one I pulled out of a scealed box.
Best regards
ANick
|
|
| Author: | superchicken77 | | Posted: | Feb 26, 2023 23:52 | | Subject: | Town plan board - Samsonite version | | Viewed: | 105 times | | Topic: | Catalog | | Status: | Open | |
| I can't find this in the catalogue. Looks like a town plan board but it's
not the UK/Australian version. This is the Canadian Samsonite version. Anyone
have any info on this or if it's already in the catalogue?
|
|
| Author: | Stuart9 | | Posted: | Feb 26, 2023 14:06 | | Subject: | Re-issue of 973pb4275 ? | | Viewed: | 96 times | | Topic: | Catalog | | Status: | Open | |
| Please put me out of my misery if you can. 
I have a newer form of 973pb4275.
Was this re-issued at some time like a number of others, I can’t find an entry
for a re-issue, might be me.
Both have Lego logo.
First image shows both looking the same and no reversed colours, however second
image shows old ( left ) style interior and newer ( right ) style interior
|
|
| Author: | kruger31 | | Posted: | Feb 26, 2023 13:20 | | Subject: | Harry Potter Figure Yes or No ???? | | Viewed: | 100 times | | Topic: | Catalog | | Status: | Open | |
| Hi is there a reason as to why gen001 appears in Set 10217 Diagon Alley yet is
not listed in the HP Section of Mini Figures , as opposed to gen013 and gen014
which are ???
|
| Author: | TheBrickGuys | | Posted: | Feb 25, 2023 21:08 | | Subject: | Set figs call for blocked open stud heads... | | Viewed: | 119 times | | Topic: | Catalog | | Status: | Open | |
| I just parted out and all the heads for all the minifigs have an inventory
with "blocked open studs" but my set has 3 of the figs with "hollow
stud". The 3 figs are:
There are no alternate minifigs with the option for hollow stud heads. I dont
want to break the figures down but I also dont want to sell them and have the
customers complain that we sent them the wrong heads. What should I do in this
case??
Thanks in advance.
Jim
|
|
| Author: | 1974 | | Posted: | Feb 25, 2023 12:17 | | Subject: | Two versions of part 2641 | | Viewed: | 103 times | | Topic: | Catalog | | Status: | Open | |
| I have noticed a rather significant mould variation on this part :
I reckon the original part "2641a" was not structually stable enough
so TLG made "2641b"
However, the "cut out" under the top plate was never used to any effect
in the two sets that used the part?
So TLG could have gone with "2641b" from the start ...
I only noticed this after buying a bunch for a MOC and I wanted to put a 4x4
structure uunder the supports. Not doable with half of them 
This part was also made in black for the Blacktron prototype set btw
What do you think?
Cheers,
Ole
|
|
|
| Author: | CBak | | Posted: | Feb 25, 2023 08:47 | | Subject: | Mystery Legoland Castle Sticker Sheet | | Viewed: | 231 times | | Topic: | Catalog | | Status: | Open | |
| I'm hoping someone here might know more about a sticker sheet that I came
across. The stickers were clearly made in reference to set 375 / 6075 Castle:
They are pre-cut, so that at least rules out them being the result of an amateur
print job. Stylistically the sticker sheet is quite similar to other sets from
the Legends theme:
And similar to other Legends sets, there is a 2002 LEGO copyright, but what LEGO
set would that copyright be connected to? The simplest explanation is that I've
come across yet another example of reproduction stickers meant for set 6075,
but then why did someone go to all the extra effort to add these anachronistic
details?
|
|
|
| Author: | 1974 | | Posted: | Feb 25, 2023 06:39 | | Subject: | How to list this part? | | Viewed: | 79 times | | Topic: | Catalog | | Status: | Open | |
| It's a colour inverted version of this one :
[p=3069bp05,3]
What are the rules now? Custom item?
Thanx in advance!
Ole
|
|
| Author: | Stuart9 | | Posted: | Feb 23, 2023 18:29 | | Subject: | Lightsaber minifigures | | Viewed: | 223 times | | Topic: | Catalog | | Status: | Open | |
| Is it possible to replace battery in lightsaber minifigures without damaging
them ?
Does the hood normally come off as the rest of the figure appears fixed, what
colour should it be ?
I have an sw0137 that fails to light
|
| Author: | krystensprouse | | Posted: | Feb 22, 2023 07:04 | | Subject: | Part 30360 use? | | Viewed: | 91 times | | Topic: | Catalog | | Status: | Open | |
| Theoretically, I know what it is... but what is it used for? Is it usually part
of an engine, building construction, generic mode of transportation part, minifigure
etc?
Trying to physically categorize it properly in my stuffs
|
| Author: | Scrp749 | | Posted: | Feb 19, 2023 19:13 | | Subject: | Adding PCC's to Catalog? | | Viewed: | 55 times | | Topic: | Catalog | | Status: | Open | |
| Hello,
I've inventoried some new sets in 2023 and seem to be finding more and more
Part Color Codes (PCC's) that don't show up in the catalog. Occasionally
I feel bold and state the PCC's in the inventory comments during submission,
but usually I am too lazy.
Is manually adding a PCC number into the catalog solely an Administrator function,
or can anyone submit a PCC? If so to the latter, where can I do this?
Thanks, - Chris
|
| Author: | mophead | | Posted: | Feb 19, 2023 13:02 | | Subject: | set 76115 missing stickered parts list | | Viewed: | 58 times | | Topic: | Catalog | | Status: | Open | |
| | can someone put in the stickered parts in set #76115 |
| Author: | Shaggy_Rogers | | Posted: | Feb 18, 2023 09:39 | | Subject: | 52603 - mechanical pencil with minifigure | | Viewed: | 66 times | | Topic: | Catalog | | Status: | Open | |
| Hi,
I am a minifigure collector and bought the mechanical pencil (52603) when i was
in the Lego Store because it came with a minifigure i didnt have. However since
coming home and searching on Bricklink on the page for 52603, it doesn't
actually have a link to the minifigure page (where it says what the item contains,
it just says N/A). Does anyone know the Bricklink reference number for this minifigure
or have a web link to its page?
Many thanks in advance for your help.
|
|
| Author: | LeeGo73 | | Posted: | Feb 18, 2023 05:15 | | Subject: | 75312: regular or extra item | | Viewed: | 77 times | | Topic: | Catalog | | Status: | Open | |
| For set 75312;
should items 61190d (3x) and 61190c (4x) not be listed as extra item instead
of regular item? Both are not used in the build of the model/minifigures and
are not shown in the instructions. Only 1 off 4 of 61190d is used in SW1158.
|
| Author: | BricksOfFaith | | Posted: | Feb 17, 2023 13:48 | | Subject: | My first catalog work: | | Viewed: | 113 times | | Topic: | Catalog | | Status: | Open | |
| So, I added my first pictures. Still pending. What do you guys think?
|
|
|
| Author: | 6thstring | | Posted: | Feb 17, 2023 02:46 | | Subject: | Joker Manor and Apocalypseburg | | Viewed: | 95 times | | Topic: | Catalog | | Status: | Open | |
| Hello. Trying to find out if I just am not sure how to navigate properly. The
70911 Joker Manor and 70840 Apocalypseburg sets I'm trying to part out used
versions. I can't find stickered pieces or at least more than a couple.
Do I need to upload those? Excited to try if so!
Thanks!
|
| Author: | Darth_Smithy | | Posted: | Feb 16, 2023 08:08 | | Subject: | Deleted minifig | | Viewed: | 138 times | | Topic: | Catalog | | Status: | Open | |
| I see that this minifig:
but with this helmet:
was deleted from the catalog. I can tell you with absolute certainty that that
figure does exist and I have the Samsonite set he came in. It was a 3 pack of
figs. Unfortunately...I have no idea what the set number was.
Anyone got any old catalogs??
|
|
| Author: | GrossyJr | | Posted: | Feb 15, 2023 08:04 | | Subject: | Should Bill and Mary marked as deletion? | | Viewed: | 156 times | | Topic: | Catalog | | Status: | Discarded | |
| Bill and Mary(of course,the legoland idea book mascots),as far as I know, did
not appeared in any set.Although there are torso stickers in the book,but you
need
to collect the other parts,so they need to be marked as deletion.
However,there are a lot of sellers who are selling them.So I can't make my
decision,could anyone solve my question?
(Ps:Sorry,my first message has a mistake,so I post it again.)
|
|
| Author: | psusaxman2000 | | Posted: | Feb 14, 2023 12:15 | | Subject: | Cardboard sleeves for instructions | | Viewed: | 77 times | | Topic: | Catalog | | Status: | Open | |
| First I apologize if this has been answered already as I've not been as active
in the forums as I was in the past.
I recently got around to building my Upon opening noticed that the
instructions were in a cardboard sleeve (attached). I know that we catalog cardboard
sleeves for capes and rubber bands, but should we also do it for these sleeves?
There appears to a be a PCC like code on here that would allow someone who was
to sell the sealed instructions a means of identifying it without opening the
sleeve. I know that there isn't a "sealed" option for instructions,
but thought it would be helpful for others. Thoughts?
|
|
|
| Author: | mateusz_welka | | Posted: | Feb 14, 2023 01:36 | | Subject: | 973p48c01 collar colour variation | | Viewed: | 86 times | | Topic: | Catalog | | Status: | Open | |
| Dear admins
I am owner of 973p48c01 but with two different colour variants of collar. One
is definitely red and second one is brown. On different sites there are no information
about colour variants but on some sides collar is named "RED" and on
other sides "Maroon".
Please add this information to part info.
Best regards
M.W.
|
|
| Author: | Thomasda | | Posted: | Feb 13, 2023 16:12 | | Subject: | Lego minifigures - visit cards - are the here | | Viewed: | 77 times | | Topic: | Catalog | | Status: | Open | |
| Some lego employees have minifigures with name and phone number etc. Printet
on them - serving as visit cards. Do these have a Place here on bricklink?
|
| Author: | bsjack13 | | Posted: | Feb 10, 2023 12:41 | | Subject: | Adding a new item | | Viewed: | 66 times | | Topic: | Catalog | | Status: | Open | |
| I added a new item a few days ago, and it said it was pending. Do we have a
way to track that item, or does anyone know how long it takes to get approved?
It is an official LEGO item with an item number. Thanks!
|
|
| Author: | binx17 | | Posted: | Feb 10, 2023 10:53 | | Subject: | Dual Molded Legs and Arms - Searchable "Tag" | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
| What I would like to propose is a new "tag" to add to many minifigure
arms and legs (even leg assemblies & torso assemblies) in the catalog so that
the tag could be searched for. Basically a new searchable term: "Dual Molded."
This way if a user wants to see every leg assembly or arm assembly that contains
even one dual molded arm or one dual molded leg within the assembly, then the
search results would populate with every instance that LEGO has made a part that
contained this.
I'm not sure how this would be achieved but I'm envisioning it as an
"invisible" tag, one that is coded into the catalog element but isn't
written out within the publicly readable description.
I think it would be greatly beneficial as certain parts that are dual molded
are harder to find via searching... For example, I sometimes try to find the
bulk of these dual molded parts by searching "boot pattern" or "sleeve
pattern," but I know there are a few other parts that exist that I'm
not seeing in my results. If the actual part isn't depicting a boot or sleeve
but is none the less dual molded, serving another design aesthetic, it won't
be listed. The same is true for dual molded parts that feature printing as this
sets them apart from the non-decorated dual molded legs/arms in other colors.
|
|
| Author: | IceWorm | | Posted: | Feb 9, 2023 22:54 | | Subject: | snake charmer is an adventurer | | Viewed: | 98 times | | Topic: | Catalog | | Status: | Open | |
| Was wondering why this snake charmer is listed under the adventurers category
for figures.
|
|
| Author: | bmitchel1976 | | Posted: | Feb 6, 2023 19:11 | | Subject: | Set 8898 - alternate stickered parts | | Viewed: | 55 times | | Topic: | Catalog | | Status: | Open | |
| I've put in a request to add two new parts for set 8898 (counterparts).
The instructions show 2x 3660 (Inverted slope 45 2 x 2) are stickered and 2 x
3665 (Inverted 46 1 x 2) are stickered.
The curent inventory shows 2x 3665L and 2 x 3665R.
What is the ETA normally on approvals for catalog requests?
Thanks.
|
|
| Author: | WILYKAT | | Posted: | Feb 5, 2023 17:50 | | Subject: | Found cardboard sleeve with number 6025311 | | Viewed: | 80 times | | Topic: | Catalog | | Status: | Open | |
| Was digging through older tub looking for something when I came across unopened
cardboard sleeve bearing number 6025311. Bricklink has listing for it
However Items Appears in was listed as N/A
I had to do a little bit of digging since 4 cloaks in one sleeve isn't common
and one of the cloak inside appeared in only one set
Logically the cardboard sleeve comes in only one set and the "Item Appears
in" should be updated to specify the set #79003-1
|
|
| Author: | Pauki86 | | Posted: | Feb 5, 2023 13:29 | | Subject: | Alternative Version Wilhuff Tarkin sw0157 | | Viewed: | 63 times | | Topic: | Catalog | | Status: | Open | |
| Hey at all,
I got a special version of the old Wilhuff Tarkin minifigure sw0157. This one
only have the red and blue signs without the yellow one. I found it in a LEGO
book as a picture. There is also the lego brand, so it is real. It is not listed
on bricklink, but im in contact.
Do you know where this special version is from?
I added a picture of the minifigure, the lego brand, the book picture and a comparison
of the normal tarkin, the alternativ tarkin and firmus piett. So you see the
difference.
Best regards Flo
|
|
|
| Author: | LeDav007 | | Posted: | Feb 5, 2023 07:04 | | Subject: | Part 20473 no marking ? | | Viewed: | 69 times | | Topic: | Catalog | | Status: | Open | |
| Hi, would anyone know that part 20473 (at least in trans neon orange, or for
some of them) does not have a LEGO logo or (C) on it ?
Photos (sorry for the bad lighting...) are of the one I have now in my hands
and I would like to confirm it's genuine...
Thank you all, David
|
|
| Author: | jennnifer | | Posted: | Feb 4, 2023 09:40 | | Subject: | Please help with missing image - DOTS | | Viewed: | 84 times | | Topic: | Catalog | | Status: | Open | |
| Hello all!
Could someone with sets
in hand please upload an image of the tile with the comet / meteor? I didn't
open one of those, but I would like the inventory to be complete.
[p=3070bpb288]
https://www.bricklink.com/v2/catalog/catalogImageAdd.page?itemType=P
Thanks!
Jen
|
|
| Author: | brunocandeias | | Posted: | Feb 3, 2023 09:16 | | Subject: | Part identification help | | Viewed: | 56 times | | Topic: | Catalog | | Status: | Open | |
| hello!!
Any help with this part?
It has the 39704 number printed but i can´t find it in catalog
Regards
|
|
| Author: | krystensprouse | | Posted: | Feb 2, 2023 03:54 | | Subject: | Catalog stats... | | Viewed: | 109 times | | Topic: | Catalog | | Status: | Open | |
| Is it just me, or do the catalog stats not change. I get popular parts are popular
parts... but it's NEVER chanegd! And it doesn't coincide at all with
my personal research... not that that really matters either I suppose
Also... is there a way to view catalog by price? Instead of by date etc? I remember
there being kind of a round about way but maybe that was a dream!
Thoughts??
|
| Author: | normivey | | Posted: | Jan 29, 2023 14:18 | | Subject: | Element Identification Help | | Viewed: | 80 times | | Topic: | Catalog | | Status: | Open | |
| Can anyone help me identify this element? It's a 2x2 brick with the shape
of a Minifigure torso holding a steering wheel.
|
|
| Author: | Stuart9 | | Posted: | Jan 29, 2023 12:21 | | Subject: | Smaller book with Super Heroes minifigure | | Viewed: | 81 times | | Topic: | Catalog | | Status: | Open | |
| Just found a book ( Buster Books ) that I can’t see in the catalogue.
Dimensions 14.5cm x 20.3cm x 2.1cm
Smaller than standard book.
Minifigure appears to be the same.
Only found Polish version of larger book ( b19sh01p1 ) with similar imagery but
different minifigure packaging, an English version is listed for sale under this
number.
Dimensions for this listed book are 21.5 x 27.4 x 1.5
Have I missed it somewhere ?
|
|
|
| Author: | platinum_lego | | Posted: | Jan 28, 2023 18:49 | | Subject: | Image not available | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
| Hi Catmins,
When I search the catalog for part 18798 I can see images for the different wheel
covers, but after clicking the 'Item consists of' link, the 'Image
not available' is shown for each part. In the page that opens after clicking
on one of these parts brings up 'No image', presumably because the default
color selected is 'Not applicable'.
Can the links be changed/modified so that an image is displayed on these pages
(even if it isn't the correct color), which would be more useful than displaying
nothing?
Steve
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)