Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | mooselover | Posted: | Jan 16, 2022 08:31 | Subject: | Part 73562 in Dark Pink | Viewed: | 104 times | Topic: | Catalog Requests | For: | Inventories Administrator | Status: | Completed | |
| My set 41686-1 came with a part 73562 instead of the listed 41477 (same part,
different mold) in Dark Pink.
I can't find any listing where part 73562 comes in Dark Pink, so I'm
assuming this is a new colour for this part.
Photo: part 41477 on left - two part 73562 on right, one of them in Dark Pink
Please add.
Thanks!
|
|
|
Author: | randyf | Posted: | Jan 15, 2022 18:50 | Subject: | Re: Brick 1 x 6 "frosted" (and possibly others) | Viewed: | 46 times | Topic: | Catalog Requests | |
| In Catalog Requests, normann1974 writes:
| | An additional note has been added to this part.
Cheers,
Randy
|
If no one has a better image of [P=3002f1] (I don't see any "frosting" on
the current image),
|
I can definitely see the frosting in the image.
| I believe this may also just be the same as with
inside supports which are currently found only in set .
Please consider updating the part's note.
|
I would need to see the inside of solid color versions of 3002 from that time
period before considering the addition of a note.
|
|
Author: | normann1974 | Posted: | Jan 15, 2022 18:27 | Subject: | Re: Brick 1 x 6 "frosted" (and possibly others) | Viewed: | 43 times | Topic: | Catalog Requests | |
| | An additional note has been added to this part.
Cheers,
Randy
|
If no one has a better image of [P=3002f1] (I don't see any "frosting" on
the current image), I believe this may also just be the same as with
inside supports which are currently found only in set .
Please consider updating the part's note.
/Jan
|
|
Author: | BricksThatStick | Posted: | Jan 15, 2022 04:12 | Subject: | Re: Split entry for part 53588pb01 | Viewed: | 23 times | Topic: | Catalog Requests | |
| In Catalog Requests, thepretzelman writes:
| In Catalog Requests, Brickitty writes:
| In Catalog Requests, thepretzelman writes:
| Part number 53588pb01 is a raised baseplate piece in the color dark bluish gray
with red marbling. The entry lists this part being contained in 5 sets. Four
of which were released in the year 2006 and one in the year 2008. The last set
is called 'Coast Guard Patrol Boat & Tower'. I believe that the version
of this part from that set should have a separate entry (with part number 53588)
as it has no red marbling. The database on rebrickable already distinguishes
between these variations so I am not alone in considering them different in this
way.
Link to existing bricklink entry: https://www.bricklink.com/v2/catalog/catalogitem.page?P=53588pb01#T=C
|
There was a thread on this a couple of years back. Bricklink used to distinguish
between the 4 items in Bionicle sets as being marbled and the one from 7739 as
being solid Dark Bluish Gray. However, I had purchased a dozen of the supposed
DBG versions, and all were marbled at least a little bit.
So at the behest of the inventory admin I sent messages to every seller who had
the item listed. We could not locate a single item that was solid DBG. Some have
a reddish color mixed in, others don't, but all were marbled -- and as
with many marbled pieces, the marbling is not consistent.
The "pictures" on Rebrickable are just renders, not actual photographs, and I
believe Rebrickable still lists that as a separate part for set 7739 only because
Bricklink used to, and Rebrickable has not updated the entry since the change
on Bricklink.
If you have evidence of a solid non-marbled Dark Bluish Gray 53588, please provide
clear pictures from every angle, including from the underside. Otherwise, this
seems to be an error from when 7739 was originally inventoried.
|
Upon further inspection, I have found red marbling on mine which I previously
assumed to be from the latter set. It is very minimal and hard to notice if not
in direct light but it is there. I suspected them all to be marbled but perhaps
some excluded red but no, that is not the case it seems.
Mine has a 2005 date underneath and I suspect they were all manufactured then.
I suppose I was just lucky to get an especially gray one and the official set
photos of 7739 mislead me.
|
Here is the earlier thread for reference:
https://www.bricklink.com/messageThread.asp?ID=286039&nID=1259846
Thanks
Paul.
|
|
Author: | thepretzelman | Posted: | Jan 14, 2022 23:49 | Subject: | Re: Split entry for part 53588pb01 | Viewed: | 29 times | Topic: | Catalog Requests | |
| In Catalog Requests, Brickitty writes:
| In Catalog Requests, thepretzelman writes:
| Part number 53588pb01 is a raised baseplate piece in the color dark bluish gray
with red marbling. The entry lists this part being contained in 5 sets. Four
of which were released in the year 2006 and one in the year 2008. The last set
is called 'Coast Guard Patrol Boat & Tower'. I believe that the version
of this part from that set should have a separate entry (with part number 53588)
as it has no red marbling. The database on rebrickable already distinguishes
between these variations so I am not alone in considering them different in this
way.
Link to existing bricklink entry: https://www.bricklink.com/v2/catalog/catalogitem.page?P=53588pb01#T=C
|
There was a thread on this a couple of years back. Bricklink used to distinguish
between the 4 items in Bionicle sets as being marbled and the one from 7739 as
being solid Dark Bluish Gray. However, I had purchased a dozen of the supposed
DBG versions, and all were marbled at least a little bit.
So at the behest of the inventory admin I sent messages to every seller who had
the item listed. We could not locate a single item that was solid DBG. Some have
a reddish color mixed in, others don't, but all were marbled -- and as
with many marbled pieces, the marbling is not consistent.
The "pictures" on Rebrickable are just renders, not actual photographs, and I
believe Rebrickable still lists that as a separate part for set 7739 only because
Bricklink used to, and Rebrickable has not updated the entry since the change
on Bricklink.
If you have evidence of a solid non-marbled Dark Bluish Gray 53588, please provide
clear pictures from every angle, including from the underside. Otherwise, this
seems to be an error from when 7739 was originally inventoried.
|
Upon further inspection, I have found red marbling on mine which I previously
assumed to be from the latter set. It is very minimal and hard to notice if not
in direct light but it is there. I suspected them all to be marbled but perhaps
some excluded red but no, that is not the case it seems.
Mine has a 2005 date underneath and I suspect they were all manufactured then.
I suppose I was just lucky to get an especially gray one and the official set
photos of 7739 mislead me.
|
|
Author: | Brickitty | Posted: | Jan 14, 2022 23:17 | Subject: | Re: Split entry for part 53588pb01 | Viewed: | 30 times | Topic: | Catalog Requests | |
| In Catalog Requests, thepretzelman writes:
| Part number 53588pb01 is a raised baseplate piece in the color dark bluish gray
with red marbling. The entry lists this part being contained in 5 sets. Four
of which were released in the year 2006 and one in the year 2008. The last set
is called 'Coast Guard Patrol Boat & Tower'. I believe that the version
of this part from that set should have a separate entry (with part number 53588)
as it has no red marbling. The database on rebrickable already distinguishes
between these variations so I am not alone in considering them different in this
way.
Link to existing bricklink entry: https://www.bricklink.com/v2/catalog/catalogitem.page?P=53588pb01#T=C
|
There was a thread on this a couple of years back. Bricklink used to distinguish
between the 4 items in Bionicle sets as being marbled and the one from 7739 as
being solid Dark Bluish Gray. However, I had purchased a dozen of the supposed
DBG versions, and all were marbled at least a little bit.
So at the behest of the inventory admin I sent messages to every seller who had
the item listed. We could not locate a single item that was solid DBG. Some have
a reddish color mixed in, others don't, but all were marbled -- and as
with many marbled pieces, the marbling is not consistent.
The "pictures" on Rebrickable are just renders, not actual photographs, and I
believe Rebrickable still lists that as a separate part for set 7739 only because
Bricklink used to, and Rebrickable has not updated the entry since the change
on Bricklink.
If you have evidence of a solid non-marbled Dark Bluish Gray 53588, please provide
clear pictures from every angle, including from the underside. Otherwise, this
seems to be an error from when 7739 was originally inventoried.
|
|
Author: | thepretzelman | Posted: | Jan 14, 2022 23:01 | Subject: | Split entry for part 53588pb01 | Viewed: | 85 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Already Exists | |
| Part number 53588pb01 is a raised baseplate piece in the color dark bluish gray
with red marbling. The entry lists this part being contained in 5 sets. Four
of which were released in the year 2006 and one in the year 2008. The last set
is called 'Coast Guard Patrol Boat & Tower'. I believe that the version
of this part from that set should have a separate entry (with part number 53588)
as it has no red marbling. The database on rebrickable already distinguishes
between these variations so I am not alone in considering them different in this
way.
Link to existing bricklink entry: https://www.bricklink.com/v2/catalog/catalogitem.page?P=53588pb01#T=C
|
|
Author: | randyf | Posted: | Jan 10, 2022 21:08 | Subject: | Re: New mold: alternate or new part? | Viewed: | 42 times | Topic: | Catalog Requests | |
| In Catalog Requests, jennnifer writes:
| Thanks for taking care of this!
Jen
|
You're very welcome.
|
Author: | jennnifer | Posted: | Jan 10, 2022 18:16 | Subject: | Re: New mold: alternate or new part? | Viewed: | 29 times | Topic: | Catalog Requests | |
| Thanks for taking care of this!
Jen
|
|
Author: | jennnifer | Posted: | Jan 10, 2022 11:27 | Subject: | Re: SET 40522-1 | Viewed: | 78 times | Topic: | Catalog Requests | |
| In Catalog Requests, jfksdca writes:
| HI. I created an XML file for 40522-1 and would like to send it to the inventory
manager or upload it myself. I would have a couple of questions before adding
it myself. Thanks, Jim
|
I am always happy to help answer questions about catalog contributions!
If you would like to add this inventory to the BrickLink catalog, all the links
you need are on the Add or Change tab.
https://www.bricklink.com/catalogAdd.asp?utm_content=subnav
Choose Add Inventory: - Set
The data from LEGO is available for this set, so you only need to use the Manual
Add function and edit the data using the form.
If you would still prefer to use the XML, the upload tool is on that same page.
It's not quite as user-friendly but still works just fine.
Jen
|
|
Author: | jfksdca | Posted: | Jan 10, 2022 10:25 | Subject: | SET 40522-1 | Viewed: | 93 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| HI. I created an XML file for 40522-1 and would like to send it to the inventory
manager or upload it myself. I would have a couple of questions before adding
it myself. Thanks, Jim
|
Author: | randyf | Posted: | Jan 9, 2022 21:26 | Subject: | Re: 42098-1 (Instructions Entry) | Viewed: | 25 times | Topic: | Catalog Requests | |
| I have added them for you, but you can use the standard form in the future:
https://www.bricklink.com/catalogReq.asp?itemType=S
Cheers,
Randy
In Catalog Requests, AlfredMangott writes:
| Please set packing dimensions
27 x 20 x 2 cm
|
|
Author: | AlfredMangott | Posted: | Jan 9, 2022 15:06 | Subject: | 42098-1 (Instructions Entry) | Viewed: | 31 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| Please set packing dimensions
27 x 20 x 2 cm
|
|
Author: | Samst | Posted: | Jan 8, 2022 19:56 | Subject: | Re: 30531-1 (Instructions Entry) | Viewed: | 25 times | Topic: | Catalog Requests | |
| Thanks.
I did it by using the standard form. But when I click on « Submit Request »,
it opens up to me a blank page and indicate that there is server issue.
So, that's why I posted on the forum
Thanks 😀
Sylvain
In Catalog Requests, randyf writes:
| I have added them for you, but you can use the standard form in the future:
https://www.bricklink.com/catalogReq.asp?itemType=S
Cheers,
Randy
In Catalog Requests, Samst writes:
| I have Weight and dimensions for the instructions of the polybag 30531 (Ninjago
- Sons of Garmadon)
Weight : 3.6 grams
Dimensions :
x=5.3 ; y= 6.9 ; z=0.02
I am unable to enter this new information. So I give them to you here.
Thanks
|
|
|
|
Author: | randyf | Posted: | Jan 8, 2022 17:23 | Subject: | Re: 30531-1 (Instructions Entry) | Viewed: | 28 times | Topic: | Catalog Requests | |
| I have added them for you, but you can use the standard form in the future:
https://www.bricklink.com/catalogReq.asp?itemType=S
Cheers,
Randy
In Catalog Requests, Samst writes:
| I have Weight and dimensions for the instructions of the polybag 30531 (Ninjago
- Sons of Garmadon)
Weight : 3.6 grams
Dimensions :
x=5.3 ; y= 6.9 ; z=0.02
I am unable to enter this new information. So I give them to you here.
Thanks
|
|
Author: | Samst | Posted: | Jan 8, 2022 16:51 | Subject: | 30531-1 (Instructions Entry) | Viewed: | 51 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| I have Weight and dimensions for the instructions of the polybag 30531 (Ninjago
- Sons of Garmadon)
Weight : 3.6 grams
Dimensions :
x=5.3 ; y= 6.9 ; z=0.02
I am unable to enter this new information. So I give them to you here.
Thanks
|
Author: | axaday | Posted: | Jan 8, 2022 16:38 | Subject: | Please Add Alternate Number | Viewed: | 25 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
Now molded 76782. I compared to the Superman hair and don't see any difference
|
|
Author: | WoutR | Posted: | Jan 8, 2022 08:44 | Subject: | Re: New mold: alternate or new part? | Viewed: | 33 times | Topic: | Catalog Requests | |
| In Catalog Requests, WoutR writes:
| In Catalog Requests, jennnifer writes:
| Hello,
I found a new mold for part 60614 in set 10297.
https://brickset.com/parts/design-95270
https://brickset.com/parts/design-60614
By the way, the stock images for 60614 has misleading details: the big rounded
hinge pins. Does anyone actually have one of these or is it just another bad
render from LEGO? The actual photos of this part match the parts I have in hand
molded with 60614.
* | | 60614 Door 1 x 2 x 3 with Vertical Handle, Mold for Tabless Frames Parts: Door |
Either way, 95270 has cosmetic differences from 60614.
I would vote for adding this as an alternate and creating a note regarding the
variants. Any other opinions?
Jen
|
|
I agree with you. It is a variant. Please mention the year of first (known) use
AND the different design numbers in the note for future reference.
|
|
Author: | WoutR | Posted: | Jan 8, 2022 08:41 | Subject: | Re: New mold: alternate or new part? | Viewed: | 35 times | Topic: | Catalog Requests | |
| In Catalog Requests, jennnifer writes:
| Hello,
I found a new mold for part 60614 in set 10297.
https://brickset.com/parts/design-95270
https://brickset.com/parts/design-60614
By the way, the stock images for 60614 has misleading details: the big rounded
hinge pins. Does anyone actually have one of these or is it just another bad
render from LEGO? The actual photos of this part match the parts I have in hand
molded with 60614.
* | | 60614 Door 1 x 2 x 3 with Vertical Handle, Mold for Tabless Frames Parts: Door |
Either way, 95270 has cosmetic differences from 60614.
I would vote for adding this as an alternate and creating a note regarding the
variants. Any other opinions?
Jen
|
I agree with you. It is a variant. Please mention the year of first (known) use
in the note for future reference.
|
|
Author: | axaday | Posted: | Jan 7, 2022 21:14 | Subject: | Please Add Alternate Part Number | Viewed: | 36 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
Now molded 48461. I can't see an important difference between them, which
is lucky because according to Brickset we've had them mixed for several years
without acknowledging it.
|
|
|
Author: | jennnifer | Posted: | Jan 7, 2022 11:00 | Subject: | New mold: alternate or new part? | Viewed: | 110 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| Hello,
I found a new mold for part 60614 in set 10297.
https://brickset.com/parts/design-95270
https://brickset.com/parts/design-60614
By the way, the stock images for 60614 has misleading details: the big rounded
hinge pins. Does anyone actually have one of these or is it just another bad
render from LEGO? The actual photos of this part match the parts I have in hand
molded with 60614.
* | | 60614 Door 1 x 2 x 3 with Vertical Handle, Mold for Tabless Frames Parts: Door |
Either way, 95270 has cosmetic differences from 60614.
I would vote for adding this as an alternate and creating a note regarding the
variants. Any other opinions?
Jen
|
|
|
Author: | Stellar | Posted: | Jan 7, 2022 07:25 | Subject: | Re: Please Add Alternate Part Number | Viewed: | 23 times | Topic: | Catalog Requests | |
| In Catalog Requests, Turez writes:
| In Catalog Requests, Stellar writes:
| In Catalog Requests, axaday writes:
| New Part 50809. I compared it to 50747pb16. Part number is stamped and if 50747
is stamped it isn't in the same place. A few other little things are different
like that with the mold, but not any of the functional areas or material shape.
|
Maybe there is a hinge difference that was not split in those canopies?
[p=54671]
The rest of 50747* have difficult images to see the hinge.
|
All 50747* have hinges with seven teeth.
|
Thanks Jonas, its interesting how some connections are updated in some parts
over a long long time.
|
|
Author: | Turez | Posted: | Jan 7, 2022 07:14 | Subject: | Re: Please Add Alternate Part Number | Viewed: | 24 times | Topic: | Catalog Requests | |
| In Catalog Requests, Stellar writes:
| In Catalog Requests, axaday writes:
| New Part 50809. I compared it to 50747pb16. Part number is stamped and if 50747
is stamped it isn't in the same place. A few other little things are different
like that with the mold, but not any of the functional areas or material shape.
|
Maybe there is a hinge difference that was not split in those canopies?
[p=54671]
The rest of 50747* have difficult images to see the hinge.
|
All 50747* have hinges with seven teeth.
|
|
Author: | Stellar | Posted: | Jan 7, 2022 07:04 | Subject: | Re: Please Add Alternate Part Number | Viewed: | 23 times | Topic: | Catalog Requests | |
| In Catalog Requests, axaday writes:
| New Part 50809. I compared it to 50747pb16. Part number is stamped and if 50747
is stamped it isn't in the same place. A few other little things are different
like that with the mold, but not any of the functional areas or material shape.
|
Maybe there is a hinge difference that was not split in those canopies?
[p=54671]
The rest of 50747* have difficult images to see the hinge.
|
|
Author: | axaday | Posted: | Jan 7, 2022 06:51 | Subject: | Please Add Alternate Part Number | Viewed: | 50 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| New Part 50809. I compared it to 50747pb16. Part number is stamped and if 50747
is stamped it isn't in the same place. A few other little things are different
like that with the mold, but not any of the functional areas or material shape.
|
|
Author: | randyf | Posted: | Jan 7, 2022 03:11 | Subject: | Re: Minifig Series 22 isn't complete | Viewed: | 44 times | Topic: | Catalog Requests | |
| In Catalog Requests, idotter writes:
These two minifigures were just submitted yesterday, so us admins had not seen
them yet. I have gone ahead and approved them just now.
Cheers,
Randy
|
Author: | Snots4Life | Posted: | Jan 6, 2022 15:42 | Subject: | Please add Alternate Item Number | Viewed: | 55 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| I have the bicycle helmet with hair part from the skate park set, but it has
a new part number of 76417 molded in. So please add an alternate item number
for this part. Original Item #: 54647pb03.
|
|
Author: | yorbrick | Posted: | Jan 5, 2022 16:48 | Subject: | Re: Please add catalog description to gear 500599 | Viewed: | 19 times | Topic: | Catalog Requests | |
| | Whenever such info is available - artwork is always displayed/listed with the
year or at least a general timeline for when it was/is thought to be conceived.
That kind of info is also most often listed at the very end. That's *exactly*
what we have right now and it is just not right. No matter how you look at it
in it's current form - the answer to the question 'Can this be misleading'
is 'yes'. This is not an opinion and it is not something debatable. What
is debatable is whether BL wants to have it this way or not. Hence my suggestion
to add an actual year of production of the print. If there was no year mentioned
in the description - we probably would not be talking about this.
|
It is already clearly stated on the page - released 2019.
|
|
Author: | randyf | Posted: | Jan 5, 2022 15:52 | Subject: | Re: Please add catalog description to gear 500599 | Viewed: | 34 times | Topic: | Catalog Requests | |
| In Catalog Requests, enig writes:
| In Catalog Requests, yorbrick writes:
| In Catalog Requests, enig writes:
| Please add extended description:
*******************************
First Edition Print - Illustration in Water Color for LEGO® Wooden Toy Elephant,
Circa 1937
Printed on premium paper with embossing.
25.5cm x 31.6cm (10.03" x 12.44")
Available exclusively as a VIP Reward for 650 points beginning in August 2019.
Between November 27 and November 30, 2020, the "cost" of this reward was reduced
to 325 points as part of a Black Friday / Cyber Monday promotion before returning
to the original 650 points. Beginning February 1, 2021, the "cost" of this reward
was reduced to 150 points in celebration of LEGO Patent Day.
*******************************
ADDITIONALLY
Currently it makes it look as if you're buying an actual watercolour item
from 1937
I propose a name change to:
First Edition Print - Illustration in Water Color for LEGO Wooden Toy Elephant,
Circa 1937 (2019)
|
It is in the gear / poster section, so should be fairly obvious you are getting
a poster and not a real toy of an elephant from 1937.
I'm fairly sure the naming of it here is exactly what LEGO called it. It
is no longer in my rewards centre, but "1st Edition of Wooden Duck Print, 1958"
is. It also has the same name in the brickset database, suggesting it is LEGO's
name for it.
If this one gets changed to a different name then so should others like
to make it clear you are getting a print and not a brochure in this case or an
original patent in some other cases. Although it is obvious (to me) that these
are prints based on their category.
And does it really need the full history of the VIP point costs for redemption?
No other VIP rewards have this information and someone would need to keep track
of the redemption costs (and the history of the redemption costs) of all VIP
gifts such as:
* | | 5005205 VIP Chrome Red Minifigure Key Chain with LEGO Logo Tile, Modified 3 x 2 Curved with Hole - Yellow Label Gear: Key Chain |
They don't even get a note that they were VIP gifts, just like sets don't
get a note about which stores they were sold in or whether they were given away
with newspapers or magazines. Add to that that the costs (and the history of
the costs) of regular sets is not stored either, so why do it for VIP redemptions?
|
I see the name of the item has already been changed and the note added. Catmins
- thanks for the quick turnaround!
@yorbrick
1) You have misunderstood me. I don't think anyone looking at the listing
would think that they'll be getting an actual wooden Elephant? My issue was
in the description not being clear enough and leading to think that it is an
actual watercolour artwork from circa 1937. I still do not think
the naming as it is right now is clear enough:
LegoFirst Edition Print - Illustration in Water Color for LEGO Wooden Toy Elephant,
Circa 1937
Whenever such info is available - artwork is always displayed/listed with the
year or at least a general timeline for when it was/is thought to be conceived.
That kind of info is also most often listed at the very end. That's *exactly*
what we have right now and it is just not right. No matter how you look at it
in it's current form - the answer to the question 'Can this be misleading'
is 'yes'. This is not an opinion and it is not something debatable. What
is debatable is whether BL wants to have it this way or not. Hence my suggestion
to add an actual year of production of the print. If there was no year mentioned
in the description - we probably would not be talking about this.
|
The items are now named exactly as they are on the prints themselves. The year
of release is superfluous information because the catalog entry already stores
the year of release.
| 2) Extended description - argument that other items do not have such info is
not an argument to not add it. Origins of the item are always interesting to
know, especially when it has something to do with art. As far as the MSRP/retail
price goes - the amount of points needed to redeem the item... also tells a story.
If the proposed description was an essay instead of a paragraph then yes, perhaps
it would be a good idea to see if it can be shortened but in this case I do not
really see a problem. Besides, the value of any random LEGO set sold at lego.com
can at least be ball-parked. While saying that 'this was available to redeem
for points' leaves you guessing about the amount of points required/relative
value at the time.
|
If someone takes the time to add some historical information to a catalog entry,
then I think it should be added. It does not mean that it has to be added to
everything.
|
|
Author: | Turez | Posted: | Jan 5, 2022 15:03 | Subject: | Re: Add 37829pb07 as appearance in 122217-1 | Viewed: | 25 times | Topic: | Catalog Requests | |
| In Catalog Requests, saarlaenner writes:
| This dinosaur Baby is Part of this foil pack.
|
The foil pack does not have an inventory yet. If you own the set, you can submit
the inventory here:
https://www.bricklink.com/catalogInvAdd.asp?viewType=S
|
Author: | saarlaenner | Posted: | Jan 5, 2022 14:48 | Subject: | Add 37829pb07 as appearance in 122217-1 | Viewed: | 43 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Already Exists | |
| This dinosaur Baby is Part of this foil pack. |
|
Author: | enig | Posted: | Jan 5, 2022 14:27 | Subject: | Re: Please add catalog description to gear 500599 | Viewed: | 25 times | Topic: | Catalog Requests | |
| In Catalog Requests, yorbrick writes:
| In Catalog Requests, enig writes:
| Please add extended description:
*******************************
First Edition Print - Illustration in Water Color for LEGO® Wooden Toy Elephant,
Circa 1937
Printed on premium paper with embossing.
25.5cm x 31.6cm (10.03" x 12.44")
Available exclusively as a VIP Reward for 650 points beginning in August 2019.
Between November 27 and November 30, 2020, the "cost" of this reward was reduced
to 325 points as part of a Black Friday / Cyber Monday promotion before returning
to the original 650 points. Beginning February 1, 2021, the "cost" of this reward
was reduced to 150 points in celebration of LEGO Patent Day.
*******************************
ADDITIONALLY
Currently it makes it look as if you're buying an actual watercolour item
from 1937
I propose a name change to:
First Edition Print - Illustration in Water Color for LEGO Wooden Toy Elephant,
Circa 1937 (2019)
|
It is in the gear / poster section, so should be fairly obvious you are getting
a poster and not a real toy of an elephant from 1937.
I'm fairly sure the naming of it here is exactly what LEGO called it. It
is no longer in my rewards centre, but "1st Edition of Wooden Duck Print, 1958"
is. It also has the same name in the brickset database, suggesting it is LEGO's
name for it.
If this one gets changed to a different name then so should others like
to make it clear you are getting a print and not a brochure in this case or an
original patent in some other cases. Although it is obvious (to me) that these
are prints based on their category.
And does it really need the full history of the VIP point costs for redemption?
No other VIP rewards have this information and someone would need to keep track
of the redemption costs (and the history of the redemption costs) of all VIP
gifts such as:
* | | 5005205 VIP Chrome Red Minifigure Key Chain with LEGO Logo Tile, Modified 3 x 2 Curved with Hole - Yellow Label Gear: Key Chain |
They don't even get a note that they were VIP gifts, just like sets don't
get a note about which stores they were sold in or whether they were given away
with newspapers or magazines. Add to that that the costs (and the history of
the costs) of regular sets is not stored either, so why do it for VIP redemptions?
|
I see the name of the item has already been changed and the note added. Catmins
- thanks for the quick turnaround!
@yorbrick
1) You have misunderstood me. I don't think anyone looking at the listing
would think that they'll be getting an actual wooden Elephant? My issue was
in the description not being clear enough and leading to think that it is an
actual watercolour artwork from circa 1937. I still do not think
the naming as it is right now is clear enough:
LegoFirst Edition Print - Illustration in Water Color for LEGO Wooden Toy Elephant,
Circa 1937
Whenever such info is available - artwork is always displayed/listed with the
year or at least a general timeline for when it was/is thought to be conceived.
That kind of info is also most often listed at the very end. That's *exactly*
what we have right now and it is just not right. No matter how you look at it
in it's current form - the answer to the question 'Can this be misleading'
is 'yes'. This is not an opinion and it is not something debatable. What
is debatable is whether BL wants to have it this way or not. Hence my suggestion
to add an actual year of production of the print. If there was no year mentioned
in the description - we probably would not be talking about this.
2) Extended description - argument that other items do not have such info is
not an argument to not add it. Origins of the item are always interesting to
know, especially when it has something to do with art. As far as the MSRP/retail
price goes - the amount of points needed to redeem the item... also tells a story.
If the proposed description was an essay instead of a paragraph then yes, perhaps
it would be a good idea to see if it can be shortened but in this case I do not
really see a problem. Besides, the value of any random LEGO set sold at lego.com
can at least be ball-parked. While saying that 'this was available to redeem
for points' leaves you guessing about the amount of points required/relative
value at the time.
|
|
Author: | Stuart9 | Posted: | Jan 5, 2022 13:05 | Subject: | Re: what fits onto a 56145 | Viewed: | 29 times | Topic: | Catalog Requests | |
| It does show a list below image.
In Catalog Requests, tec writes:
|
* | | 56145 Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim Parts: Wheel |
Do someone know the tires it fits?
we lack a proper note I think.
|
|
|
|
Author: | yorbrick | Posted: | Jan 5, 2022 12:46 | Subject: | Re: Please add catalog description to gear 500599 | Viewed: | 28 times | Topic: | Catalog Requests | |
| In Catalog Requests, enig writes:
| Please add extended description:
*******************************
First Edition Print - Illustration in Water Color for LEGO® Wooden Toy Elephant,
Circa 1937
Printed on premium paper with embossing.
25.5cm x 31.6cm (10.03" x 12.44")
Available exclusively as a VIP Reward for 650 points beginning in August 2019.
Between November 27 and November 30, 2020, the "cost" of this reward was reduced
to 325 points as part of a Black Friday / Cyber Monday promotion before returning
to the original 650 points. Beginning February 1, 2021, the "cost" of this reward
was reduced to 150 points in celebration of LEGO Patent Day.
*******************************
ADDITIONALLY
Currently it makes it look as if you're buying an actual watercolour item
from 1937
I propose a name change to:
First Edition Print - Illustration in Water Color for LEGO Wooden Toy Elephant,
Circa 1937 (2019)
|
It is in the gear / poster section, so should be fairly obvious you are getting
a poster and not a real toy of an elephant from 1937.
I'm fairly sure the naming of it here is exactly what LEGO called it. It
is no longer in my rewards centre, but "1st Edition of Wooden Duck Print, 1958"
is. It also has the same name in the brickset database, suggesting it is LEGO's
name for it.
If this one gets changed to a different name then so should others like
to make it clear you are getting a print and not a brochure in this case or an
original patent in some other cases. Although it is obvious (to me) that these
are prints based on their category.
And does it really need the full history of the VIP point costs for redemption?
No other VIP rewards have this information and someone would need to keep track
of the redemption costs (and the history of the redemption costs) of all VIP
gifts such as:
* | | 5005205 VIP Chrome Red Minifigure Key Chain with LEGO Logo Tile, Modified 3 x 2 Curved with Hole - Yellow Label Gear: Key Chain |
They don't even get a note that they were VIP gifts, just like sets don't
get a note about which stores they were sold in or whether they were given away
with newspapers or magazines. Add to that that the costs (and the history of
the costs) of regular sets is not stored either, so why do it for VIP redemptions?
|
|
Author: | enig | Posted: | Jan 5, 2022 11:52 | Subject: | Re: Please add catalog description to gear 5005997 | Viewed: | 30 times | Topic: | Catalog Requests | |
| In Catalog Requests, enig writes:
| Please add extended description:
*******************************
First Edition Print - Illustration in Water Color for LEGO® Wooden Toy Elephant,
Circa 1937
Printed on premium paper with embossing.
25.5cm x 31.6cm (10.03" x 12.44")
Available exclusively as a VIP Reward for 650 points beginning in August 2019.
Between November 27 and November 30, 2020, the "cost" of this reward was reduced
to 325 points as part of a Black Friday / Cyber Monday promotion before returning
to the original 650 points. Beginning February 1, 2021, the "cost" of this reward
was reduced to 150 points in celebration of LEGO Patent Day.
*******************************
ADDITIONALLY
Currently it makes it look as if you're buying an actual watercolour item
from 1937
I propose a name change to:
First Edition Print - Illustration in Water Color for LEGO Wooden Toy Elephant,
Circa 1937 (2019)
Side-question. How does one post a gear-item inside the message? I am relatively
sure that it was possible to do previously. Did this feature got broken with
the addition of color attribute?
[g=500599]
[g=500599-1]
[gear=500599]
[gear=500599-1]
|
Oh. The correct gear ID is 5005997
/facepalm
|
|
Author: | enig | Posted: | Jan 5, 2022 11:39 | Subject: | Please add catalog description to gear 500599 | Viewed: | 53 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| Please add extended description:
*******************************
First Edition Print - Illustration in Water Color for LEGO® Wooden Toy Elephant,
Circa 1937
Printed on premium paper with embossing.
25.5cm x 31.6cm (10.03" x 12.44")
Available exclusively as a VIP Reward for 650 points beginning in August 2019.
Between November 27 and November 30, 2020, the "cost" of this reward was reduced
to 325 points as part of a Black Friday / Cyber Monday promotion before returning
to the original 650 points. Beginning February 1, 2021, the "cost" of this reward
was reduced to 150 points in celebration of LEGO Patent Day.
*******************************
ADDITIONALLY
Currently it makes it look as if you're buying an actual watercolour item
from 1937
I propose a name change to:
First Edition Print - Illustration in Water Color for LEGO Wooden Toy Elephant,
Circa 1937 (2019)
Side-question. How does one post a gear-item inside the message? I am relatively
sure that it was possible to do previously. Did this feature got broken with
the addition of color attribute?
[g=500599]
[g=500599-1]
[gear=500599]
[gear=500599-1]
|
|
Author: | Classicsmiley | Posted: | Jan 4, 2022 14:58 | Subject: | Re: 45517-1 Inventory | Viewed: | 49 times | Topic: | Catalog Requests | |
| In General, pb_bricks writes:
| I bought set (in its sealed box) and expected to have part
* | | 86444 Electric Power Adapter / Transformer, Input: 120V AC / Output: 10V DC Parts: Electric | inside,
as this is what Bricklink states as the inventory of the set. Instead of part
86444, I got part
* | | 16523 Electric Power Adapter / Transformer, Input: 100V - 240V AC / Output: 10V DC (Square Top) Parts: Electric | . So is this an inventory mistake or am I missing something?
|
|
|
Author: | pb_bricks | Posted: | Jan 4, 2022 14:47 | Subject: | 45517-1 Inventory | Viewed: | 92 times | Topic: | Catalog Requests | For: | Inventories Administrator | Status: | Completed | |
| I bought set 45517-1 (in its sealed box) and expected to have part 86444 inside,
as this is what Bricklink states as the inventory of the set. Instead of part
86444, I got part 16523. So is this an inventory mistake or am I missing something?
|
|
Author: | here4bricks614 | Posted: | Jan 3, 2022 08:28 | Subject: | Set 4820 PCCs and Trans Purple 6510 | Viewed: | 67 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| The instructions for set 4820 contain many PCCs that aren’t present on Bricklink,
but also raise another question regarding the existence of part 6510 in Trans-Purple.
Is there any evidence to suggest this part even exists? This part isn’t on sale,
nor does it have a PCC, photo, or presence on a render. It is also not present
on the instructions.
Perhaps a catalog associate can add these PCCs to the catalog. Some of the numbers
are quite difficult to make out, and perhaps they can make them out better than
I can.
|
|
Author: | axaday | Posted: | Jan 2, 2022 20:48 | Subject: | Re: Please Add Alternate Number | Viewed: | 37 times | Topic: | Catalog Requests | |
| In Catalog Requests, randyf writes:
| In Catalog Requests, axaday writes:
| I got a new bicycle wheel on the racing wheelchair and it IS a new color, but
it is actually the wheel that I already had on a bike from an older set. #28578.
28575c01
|
I can't find a 28578 or 28575 anywhere in the catalog.
What is the old number and what is the new number?
|
Sorry, I had a lot on my shoulders. I see it already done, but I am talking about
the one piece bicycle wheel. [p= 92851c01] now molded 28578.
|
|
Author: | randyf | Posted: | Jan 2, 2022 13:48 | Subject: | Re: Please Add Alternate Number | Viewed: | 34 times | Topic: | Catalog Requests | |
| In Catalog Requests, paulvdb writes:
| In Catalog Requests, randyf writes:
| In Catalog Requests, axaday writes:
| I got a new bicycle wheel on the racing wheelchair and it IS a new color, but
it is actually the wheel that I already had on a bike from an older set. #28578.
28575c01
|
I can't find a 28578 or 28575 anywhere in the catalog.
What is the old number and what is the new number?
|
28578 is the design ID https://brickset.com/parts/design-28578
|
Thanks, Paul.
|
|
Author: | paulvdb | Posted: | Jan 2, 2022 11:54 | Subject: | Re: Please Add Alternate Number | Viewed: | 30 times | Topic: | Catalog Requests | |
| In Catalog Requests, randyf writes:
| In Catalog Requests, axaday writes:
| I got a new bicycle wheel on the racing wheelchair and it IS a new color, but
it is actually the wheel that I already had on a bike from an older set. #28578.
28575c01
|
I can't find a 28578 or 28575 anywhere in the catalog.
What is the old number and what is the new number?
|
28578 is the design ID https://brickset.com/parts/design-28578
|
Author: | randyf | Posted: | Jan 2, 2022 11:38 | Subject: | Re: Please Add Alternate Number | Viewed: | 24 times | Topic: | Catalog Requests | |
| In Catalog Requests, axaday writes:
| I got a new bicycle wheel on the racing wheelchair and it IS a new color, but
it is actually the wheel that I already had on a bike from an older set. #28578.
28575c01
|
I can't find a 28578 or 28575 anywhere in the catalog.
What is the old number and what is the new number?
|
Author: | axaday | Posted: | Jan 2, 2022 11:30 | Subject: | Please Add Alternate Number | Viewed: | 49 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| I got a new bicycle wheel on the racing wheelchair and it IS a new color, but
it is actually the wheel that I already had on a bike from an older set. #28578.
28575c01
|
Author: | FreeStorm | Posted: | Dec 30, 2021 07:56 | Subject: | Additional note for 39787c01 | Viewed: | 38 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| lease add additional note below for part
* | | 39787c01 Duplo Siren with Light and Sound, 1 x 2 Base with Trans-Dark Blue Lights, Curved Edges and Red 2 Stud Button on Top Parts: DUPLO, Vehicle |
Additional note:
This part requires 3 LR41 batteries.
-Fred
|
Author: | FreeStorm | Posted: | Dec 30, 2021 07:46 | Subject: | Additional note for 52189c02 | Viewed: | 34 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| Please add additional note below for part
Additional note:
This part requires 3 LR41 batteries.
-Fred
|
Author: | SezaR | Posted: | Dec 29, 2021 18:19 | Subject: | Please mark for deletion 2972 | Viewed: | 68 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
* | | 2972 Train Base 6 x 34 Split-Level with Bottom Tubes (Undetermined Type) Parts: Train Marked for Deletion |
|
Author: | randyf | Posted: | Dec 28, 2021 20:29 | Subject: | Re: Please Merge These Clikits Pens | Viewed: | 34 times | Topic: | Catalog Requests | |
| In Catalog Requests, axaday writes:
| [g=4271396] and [g=P3602]
The packaging says neither clip nor carabiner, but I believe carabiner is a better
name.
|
Done.
|
Author: | axaday | Posted: | Dec 28, 2021 19:17 | Subject: | Please Merge These Clikits Pens | Viewed: | 47 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| [g=4271396] and [g=P3602]
The packaging says neither clip nor carabiner, but I believe carabiner is a better
name.
|
|
Author: | Fragty | Posted: | Dec 28, 2021 15:34 | Subject: | Add note to part 4006 | Viewed: | 68 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| Can a note be added to part 4006, similar to the note on part 4085a:
"This part in Light Gray is known to have a variation of shades as can be seen
in the additional image."
As you can see it's the exact same shade as the 4085a variation, and the
time period also matches (early 80's).
Probably made from the same material.
Greetings,
Koen
|
|
|
Author: | randyf | Posted: | Dec 28, 2021 02:57 | Subject: | Re: Please add notes for set/OB 4940-1 | Viewed: | 24 times | Topic: | Catalog Requests | |
| In Catalog Requests, cosmicray writes:
| Certain production runs of this set
came with a Rock Raiders comic book, while others did not.
If you look closely at the Original Box image, you will note the orange outlined
item in the lower right corner of the front surface. That is the indicator that
this was the run with the comic book.
The copies I have remaining (one of which has a good condition front panel) do
not have that orange outlined flash message. Of the 20-30 copies I obtained (between
2001 and 2002) I do not ever recall seeing a comic book. It possible (just a
hunch tho) that the comic book was primarily shipped in EU productions runs.
I'll try to get a good image of this box front to illustrate the difference.
This may also necessitate some adjustment to the inventory to show the comic
book to be optional.
thanks, Nita Rae
|
An additional note was added to the box entry for this set.
Cheers,
Randy
|
|
Author: | axaday | Posted: | Dec 27, 2021 20:44 | Subject: | Re: Add inventory and minifigure for set 40394 | Viewed: | 42 times | Topic: | Catalog Requests | |
| In Catalog Requests, Yergin writes:
| I've added chef027 for approval
|
I put a pic in.
|
|
Author: | Yergin | Posted: | Dec 26, 2021 19:27 | Subject: | Re: Add inventory and minifigure for set 40394 | Viewed: | 28 times | Topic: | Catalog Requests | |
| Thanks Jen,
I've added chef027 for approval, I've got the message image successfully
added.
Think I'm on the right track now.
Hopefully it gets approved and I can add it to the inventory as you describe
In Catalog Requests, jennnifer writes:
| In Catalog Requests, beaverbrick writes:
| In Catalog Requests, Yergin writes:
| Hi Jen,
I've managed to add the parts inventory request.
|
|
Looks good!
| |
The Minifigure request I'm still having difficulty in finding the options,
I've been trying to follow the Minifgure numbers from the previous 2 Lego
House Chefs (chef025 in 40295 and chef026 in 40356) by setting up chef027.
I can't seem to get past the first page when doing this so must be doing
something wrong.
Any assistance would be appreciated
Cheers
Nathan
|
I think you need to create the chef027 minifigure first?
You need to do that first before you can add the inventory of parts.
On the 'Catalog Add or Change' screen, you need to hit 'Minifigure'
under the 'Add Item' section. Direct link is...
https://www.bricklink.com/wantedCatalog.asp?catType=M
Once it's created, you'll need to add an image too.
|
Yes!
1) Add the new minifigure
2) Submit an image
3) Wait for approval
then:
4) Submit inventory for the minifig and edit your pending Inventory for the set
to include the minifig.
Jen
|
|
|
Author: | axaday | Posted: | Dec 25, 2021 17:01 | Subject: | Re: Please Move Image and Xref / Remove Image | Viewed: | 32 times | Topic: | Catalog Requests | |
| In Catalog Requests, here4bricks614 writes:
| Part 3004 in Earth Orange appears to have a photo as well but doesn't appear
in any sets, nor does it appear to be a NPP. The part in the photo looks and
is almost definitely Dark Orange.
|
Agree. Earth Orange would need to be shot in very poor light to look like that
and the background doesn't seem to have been affected.
|
Author: | here4bricks614 | Posted: | Dec 25, 2021 16:55 | Subject: | Re: Please Move Image and Xref / Remove Image | Viewed: | 30 times | Topic: | Catalog Requests | |
| In Catalog Requests, Turez writes:
Part 3004 in Earth Orange appears to have a photo as well but doesn't appear
in any sets, nor does it appear to be a NPP. The part in the photo looks and
is almost definitely Dark Orange.
|
|
Author: | axaday | Posted: | Dec 25, 2021 16:49 | Subject: | Re: Please Move Image and Xref / Remove Image | Viewed: | 29 times | Topic: | Catalog Requests | |
| In Catalog Requests, Turez writes:
Which is a darn shame. Like pink Minifig arms, they are pretty unlikely to fix
their omission now.
|
|
|
Author: | jennnifer | Posted: | Dec 25, 2021 13:06 | Subject: | Re: Add inventory and minifigure for set 40394 | Viewed: | 37 times | Topic: | Catalog Requests | |
| In Catalog Requests, beaverbrick writes:
| In Catalog Requests, Yergin writes:
| Hi Jen,
I've managed to add the parts inventory request.
|
|
Looks good!
| |
The Minifigure request I'm still having difficulty in finding the options,
I've been trying to follow the Minifgure numbers from the previous 2 Lego
House Chefs (chef025 in 40295 and chef026 in 40356) by setting up chef027.
I can't seem to get past the first page when doing this so must be doing
something wrong.
Any assistance would be appreciated
Cheers
Nathan
|
I think you need to create the chef027 minifigure first?
You need to do that first before you can add the inventory of parts.
On the 'Catalog Add or Change' screen, you need to hit 'Minifigure'
under the 'Add Item' section. Direct link is...
https://www.bricklink.com/wantedCatalog.asp?catType=M
Once it's created, you'll need to add an image too.
|
Yes!
1) Add the new minifigure
2) Submit an image
3) Wait for approval
then:
4) Submit inventory for the minifig and edit your pending Inventory for the set
to include the minifig.
Jen
|
|
Author: | beaverbrick | Posted: | Dec 25, 2021 05:24 | Subject: | Re: Add inventory and minifigure for set 40394 | Viewed: | 29 times | Topic: | Catalog Requests | |
| In Catalog Requests, Yergin writes:
| Hi Jen,
I've managed to add the parts inventory request.
The Minifigure request I'm still having difficulty in finding the options,
I've been trying to follow the Minifgure numbers from the previous 2 Lego
House Chefs (chef025 in 40295 and chef026 in 40356) by setting up chef027.
I can't seem to get past the first page when doing this so must be doing
something wrong.
Any assistance would be appreciated
Cheers
Nathan
In Catalog Requests, jennnifer writes:
| If you have this set in hand, you start at the Add or Change tab. Choose Add
Inventory -Set and enter your set number in the Manual Add column on the next
page. This will bring you to the inventory form where you can list the part numbers
and create the pending inventory. You will be able to edit this after you have
submitted it.
If this set follows the pattern of the other similar polybags, you will need
to add this minifigure to the catalog. I can walk you through the steps. Are
you able to take a decent image of the minifig? It will need to be built and
have nothing in its hands.
Jen
In Catalog Requests, Yergin writes:
| Hi,
Looking for help with trying add inventory and the minifigure in set 40394.
I haven't been able to work out how to do it myself.
Thanks in advance for any help.
1 Minifigure in set consisting of parts:
970c00 - Black Hips and Legs Plain (Monochrome)
973pb3131c01 - Torso Chef with 8 Buttons, Long Red Neckerchief, Light Bluish
Gray Wrinkles Front, LEGO House Home of the Brick Back Pattern / White Arms /
Yellow Hands
3626cpb2097 - Minifigure, Head Male Dark Brown Eyebrows, Open Mouth Smile with
White Teeth and Red Tongue Pattern - Hollow Stud
98381 - Minifigure, Headgear Cap, Butcher / Food Service
Set inventory:
2 x 34172 - Minifigure, Utensil Bowl
2 x 29636 - Minifigure, Utensil Whisk
|
|
|
I think you need to create the chef027 minifigure first?
You need to do that first before you can add the inventory of parts.
On the 'Catalog Add or Change' screen, you need to hit 'Minifigure'
under the 'Add Item' section. Direct link is...
https://www.bricklink.com/wantedCatalog.asp?catType=M
Once it's created, you'll need to add an image too.
|
|
Author: | Yergin | Posted: | Dec 25, 2021 03:23 | Subject: | Re: Add inventory and minifigure for set 40394 | Viewed: | 24 times | Topic: | Catalog Requests | |
| Hi Axaday,
The front of that torso is correct, the difference is he has the back print of
the Lego House part number 973pb3131c01
However looking at chef025 and chef026 from the other 2 Lego House Chefs the
images don't include a back shot on here.
In Catalog Requests, axaday writes:
| I can take a pic of the minifig if this torso is correct.
In Catalog Requests, jennnifer writes:
| If you have this set in hand, you start at the Add or Change tab. Choose Add
Inventory -Set and enter your set number in the Manual Add column on the next
page. This will bring you to the inventory form where you can list the part numbers
and create the pending inventory. You will be able to edit this after you have
submitted it.
If this set follows the pattern of the other similar polybags, you will need
to add this minifigure to the catalog. I can walk you through the steps. Are
you able to take a decent image of the minifig? It will need to be built and
have nothing in its hands.
Jen
In Catalog Requests, Yergin writes:
| Hi,
Looking for help with trying add inventory and the minifigure in set 40394.
I haven't been able to work out how to do it myself.
Thanks in advance for any help.
1 Minifigure in set consisting of parts:
970c00 - Black Hips and Legs Plain (Monochrome)
973pb3131c01 - Torso Chef with 8 Buttons, Long Red Neckerchief, Light Bluish
Gray Wrinkles Front, LEGO House Home of the Brick Back Pattern / White Arms /
Yellow Hands
3626cpb2097 - Minifigure, Head Male Dark Brown Eyebrows, Open Mouth Smile with
White Teeth and Red Tongue Pattern - Hollow Stud
98381 - Minifigure, Headgear Cap, Butcher / Food Service
Set inventory:
2 x 34172 - Minifigure, Utensil Bowl
2 x 29636 - Minifigure, Utensil Whisk
|
|
|
|
|
Author: | Yergin | Posted: | Dec 25, 2021 03:19 | Subject: | Re: Add inventory and minifigure for set 40394 | Viewed: | 26 times | Topic: | Catalog Requests | |
| Hi Jen,
I've managed to add the parts inventory request.
The Minifigure request I'm still having difficulty in finding the options,
I've been trying to follow the Minifgure numbers from the previous 2 Lego
House Chefs (chef025 in 40295 and chef026 in 40356) by setting up chef027.
I can't seem to get past the first page when doing this so must be doing
something wrong.
Any assistance would be appreciated
Cheers
Nathan
In Catalog Requests, jennnifer writes:
| If you have this set in hand, you start at the Add or Change tab. Choose Add
Inventory -Set and enter your set number in the Manual Add column on the next
page. This will bring you to the inventory form where you can list the part numbers
and create the pending inventory. You will be able to edit this after you have
submitted it.
If this set follows the pattern of the other similar polybags, you will need
to add this minifigure to the catalog. I can walk you through the steps. Are
you able to take a decent image of the minifig? It will need to be built and
have nothing in its hands.
Jen
In Catalog Requests, Yergin writes:
| Hi,
Looking for help with trying add inventory and the minifigure in set 40394.
I haven't been able to work out how to do it myself.
Thanks in advance for any help.
1 Minifigure in set consisting of parts:
970c00 - Black Hips and Legs Plain (Monochrome)
973pb3131c01 - Torso Chef with 8 Buttons, Long Red Neckerchief, Light Bluish
Gray Wrinkles Front, LEGO House Home of the Brick Back Pattern / White Arms /
Yellow Hands
3626cpb2097 - Minifigure, Head Male Dark Brown Eyebrows, Open Mouth Smile with
White Teeth and Red Tongue Pattern - Hollow Stud
98381 - Minifigure, Headgear Cap, Butcher / Food Service
Set inventory:
2 x 34172 - Minifigure, Utensil Bowl
2 x 29636 - Minifigure, Utensil Whisk
|
|
|
|
Author: | axaday | Posted: | Dec 24, 2021 19:17 | Subject: | Re: Add inventory and minifigure for set 40394 | Viewed: | 42 times | Topic: | Catalog Requests | |
| I can take a pic of the minifig if this torso is correct.
In Catalog Requests, jennnifer writes:
| If you have this set in hand, you start at the Add or Change tab. Choose Add
Inventory -Set and enter your set number in the Manual Add column on the next
page. This will bring you to the inventory form where you can list the part numbers
and create the pending inventory. You will be able to edit this after you have
submitted it.
If this set follows the pattern of the other similar polybags, you will need
to add this minifigure to the catalog. I can walk you through the steps. Are
you able to take a decent image of the minifig? It will need to be built and
have nothing in its hands.
Jen
In Catalog Requests, Yergin writes:
| Hi,
Looking for help with trying add inventory and the minifigure in set 40394.
I haven't been able to work out how to do it myself.
Thanks in advance for any help.
1 Minifigure in set consisting of parts:
970c00 - Black Hips and Legs Plain (Monochrome)
973pb3131c01 - Torso Chef with 8 Buttons, Long Red Neckerchief, Light Bluish
Gray Wrinkles Front, LEGO House Home of the Brick Back Pattern / White Arms /
Yellow Hands
3626cpb2097 - Minifigure, Head Male Dark Brown Eyebrows, Open Mouth Smile with
White Teeth and Red Tongue Pattern - Hollow Stud
98381 - Minifigure, Headgear Cap, Butcher / Food Service
Set inventory:
2 x 34172 - Minifigure, Utensil Bowl
2 x 29636 - Minifigure, Utensil Whisk
|
|
|
|
Author: | jennnifer | Posted: | Dec 24, 2021 17:18 | Subject: | Re: Add inventory and minifigure for set 40394 | Viewed: | 41 times | Topic: | Catalog Requests | |
| If you have this set in hand, you start at the Add or Change tab. Choose Add
Inventory -Set and enter your set number in the Manual Add column on the next
page. This will bring you to the inventory form where you can list the part numbers
and create the pending inventory. You will be able to edit this after you have
submitted it.
If this set follows the pattern of the other similar polybags, you will need
to add this minifigure to the catalog. I can walk you through the steps. Are
you able to take a decent image of the minifig? It will need to be built and
have nothing in its hands.
Jen
In Catalog Requests, Yergin writes:
| Hi,
Looking for help with trying add inventory and the minifigure in set 40394.
I haven't been able to work out how to do it myself.
Thanks in advance for any help.
1 Minifigure in set consisting of parts:
970c00 - Black Hips and Legs Plain (Monochrome)
973pb3131c01 - Torso Chef with 8 Buttons, Long Red Neckerchief, Light Bluish
Gray Wrinkles Front, LEGO House Home of the Brick Back Pattern / White Arms /
Yellow Hands
3626cpb2097 - Minifigure, Head Male Dark Brown Eyebrows, Open Mouth Smile with
White Teeth and Red Tongue Pattern - Hollow Stud
98381 - Minifigure, Headgear Cap, Butcher / Food Service
Set inventory:
2 x 34172 - Minifigure, Utensil Bowl
2 x 29636 - Minifigure, Utensil Whisk
|
|
|
Author: | Yergin | Posted: | Dec 24, 2021 06:17 | Subject: | Add inventory and minifigure for set 40394 | Viewed: | 74 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| Hi,
Looking for help with trying add inventory and the minifigure in set 40394.
I haven't been able to work out how to do it myself.
Thanks in advance for any help.
1 Minifigure in set consisting of parts:
970c00 - Black Hips and Legs Plain (Monochrome)
973pb3131c01 - Torso Chef with 8 Buttons, Long Red Neckerchief, Light Bluish
Gray Wrinkles Front, LEGO House Home of the Brick Back Pattern / White Arms /
Yellow Hands
3626cpb2097 - Minifigure, Head Male Dark Brown Eyebrows, Open Mouth Smile with
White Teeth and Red Tongue Pattern - Hollow Stud
98381 - Minifigure, Headgear Cap, Butcher / Food Service
Set inventory:
2 x 34172 - Minifigure, Utensil Bowl
2 x 29636 - Minifigure, Utensil Whisk
|
|
Author: | jbroman | Posted: | Dec 22, 2021 13:49 | Subject: | Re: Please change item numbers | Viewed: | 34 times | Topic: | Catalog Requests | |
| In Catalog Requests, randyf writes:
| In Catalog Requests, jbroman writes:
| Please change [g=g31391] to 31390 (Original Box Entry)
And add to as Original Box Entry
Question:
Is there an official way to add original boxes?
I looked on the Catalog Add or Change page, but didn't see anything about
boxes.
|
Gear items cannot have original box entries. Only the Set item type has this
feature.
In this case, though, what you are looking at is two entirely different game
entries. One of these entries is for the game in the normal cardboard box packaging
(31390), and the other entry is for the game in the collector's tin (31391).
31391 is _not_ just the packaging for 31390.
Cheers,
Randy
|
I missed that little nuance.
I’ll put in the change then like I did for 31390.
|
|
Author: | randyf | Posted: | Dec 22, 2021 10:41 | Subject: | Re: Please change item numbers | Viewed: | 29 times | Topic: | Catalog Requests | |
| In Catalog Requests, jbroman writes:
| Please change [g=g31391] to 31390 (Original Box Entry)
And add to as Original Box Entry
Question:
Is there an official way to add original boxes?
I looked on the Catalog Add or Change page, but didn't see anything about
boxes.
|
Gear items cannot have original box entries. Only the Set item type has this
feature.
In this case, though, what you are looking at is two entirely different game
entries. One of these entries is for the game in the normal cardboard box packaging
(31390), and the other entry is for the game in the collector's tin (31391).
31391 is _not_ just the packaging for 31390.
Cheers,
Randy
|
|
Author: | ZwarteMagica | Posted: | Dec 22, 2021 05:18 | Subject: | Please mark 3006pb009 for deletion | Viewed: | 81 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| Entry
* | | BA311pb01 Stickered Assembly 10 x 3 x 1 with AMD and Vodafone Logo Pattern (Stickers) - Set 8654 - 1 Brick 2 x 10, 1 Technic, Brick 1 x 1 with Hole Parts: Stickered Assembly {Red} |
makes
obsoleet.
|
Author: | jbroman | Posted: | Dec 21, 2021 21:08 | Subject: | Please change item numbers | Viewed: | 50 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Discarded | |
| Please change [g=g31391] to 31390 (Original Box Entry)
And add to as Original Box Entry
Question:
Is there an official way to add original boxes?
I looked on the Catalog Add or Change page, but didn't see anything about
boxes.
|
Author: | fritsp | Posted: | Dec 21, 2021 07:41 | Subject: | Re: Add dimensions to 910028-1 Pursuit of Flight | Viewed: | 29 times | Topic: | Catalog Requests | |
| In Catalog Requests, DamoB writes:
| Lego have sent me an early Christmas present when my 910028-1 was delivered this
morning but the form wouldn't work to add dimensions ('internal server
error'.
Width = 19.0 cm
Length = 35.7 cm
Height = 5.7cm
|
I tried to input the above values, worked. so they are in there now!
|
Author: | DamoB | Posted: | Dec 21, 2021 06:25 | Subject: | Add dimensions to 910028-1 Pursuit of Flight | Viewed: | 38 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Already Exists | |
| Lego have sent me an early Christmas present when my 910028-1 was delivered this
morning but the form wouldn't work to add dimensions ('internal server
error'.
Width = 19.0 cm
Length = 35.7 cm
Height = 5.7cm
|
Author: | BricksThatStick | Posted: | Dec 21, 2021 05:23 | Subject: | Re: Delete 4694c01pb03 - sticker is wrong | Viewed: | 36 times | Topic: | Catalog Requests | |
| In Catalog Requests, BricksShop writes:
| Hello,
According the instruction of on page 36 the stickers are applied to
the switch and a 1x2 Technic Brick on the narrow side.
These will be Stickered Assemblies.
For that reason the item should be deleted.
Regards,
Oliver.
|
Do (or anyone else reading with this set) have have them to submit new stickered
assembly catalog entries?
Thanks
Paul.
|
|
Author: | randyf | Posted: | Dec 20, 2021 17:22 | Subject: | Re: Ms Marvel Minifigure image missing parts | Viewed: | 44 times | Topic: | Catalog Requests | |
| In Catalog Requests, Turez writes:
| In Catalog Requests, randyf writes:
| In Catalog Requests, MEAD_Bricks writes:
| Hi
The Ms marvel minifigure (sh375) is missing 2 parts from her inventory on the
photo :
2 x Medium Nougat Hand Gorilla Fist (fits Minifigure Hand) Catalog: Parts: Minifigure,
Body Part 6167913
I don't have one on my inventory, but the picture should be updated to add
these two parts.
|
The inventory in this case should be made to match the photo. In accordance with
catalog guidelines, the gorilla fists are considered hand-held accessories and
should not be a part of the minifigure. I have switched this over to an Inventory
Admin so that they may update the inventory.
|
Done. The hands are now included in the set inventory.
Please remove the alternate image for the figure.
|
Also done. Thanks, Jonas.
|
|
Author: | Turez | Posted: | Dec 20, 2021 17:08 | Subject: | Re: Ms Marvel Minifigure image missing parts | Viewed: | 30 times | Topic: | Catalog Requests | |
| In Catalog Requests, randyf writes:
| In Catalog Requests, MEAD_Bricks writes:
| Hi
The Ms marvel minifigure (sh375) is missing 2 parts from her inventory on the
photo :
2 x Medium Nougat Hand Gorilla Fist (fits Minifigure Hand) Catalog: Parts: Minifigure,
Body Part 6167913
I don't have one on my inventory, but the picture should be updated to add
these two parts.
|
The inventory in this case should be made to match the photo. In accordance with
catalog guidelines, the gorilla fists are considered hand-held accessories and
should not be a part of the minifigure. I have switched this over to an Inventory
Admin so that they may update the inventory.
|
Done. The hands are now included in the set inventory.
Please remove the alternate image for the figure.
|
|
Author: | randyf | Posted: | Dec 20, 2021 16:49 | Subject: | Re: Ms Marvel Minifigure image missing parts | Viewed: | 41 times | Topic: | Catalog Requests | |
| In Catalog Requests, MEAD_Bricks writes:
| Hi
The Ms marvel minifigure (sh375) is missing 2 parts from her inventory on the
photo :
2 x Medium Nougat Hand Gorilla Fist (fits Minifigure Hand) Catalog: Parts: Minifigure,
Body Part 6167913
I don't have one on my inventory, but the picture should be updated to add
these two parts.
|
The inventory in this case should be made to match the photo. In accordance with
catalog guidelines, the gorilla fists are considered hand-held accessories and
should not be a part of the minifigure. I have switched this over to an Inventory
Admin so that they may update the inventory.
Cheers,
Randy
|
|
Author: | Brick_a_mind | Posted: | Dec 20, 2021 13:03 | Subject: | Re: 41681c01, 41681c02 | Viewed: | 27 times | Topic: | Catalog Requests | |
| While we are at it, 41681c04 could be as follows:
41679 x 2 in Dark Gray
41680 x 1 in Black
41681 x 1 in Red
and 41681c05 could be:
41679 x 2 in Dark Gray
41680 x 1 in Black
41681 x 1 in Blue
These combinations come from set 8558-1, Cahdok & Gahdok
Thanks again.
|
Author: | Brick_a_mind | Posted: | Dec 20, 2021 12:43 | Subject: | 41681c01, 41681c02 | Viewed: | 59 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Discarded | |
| Could we add to the catalog a third combination (41681c03)? This would include
the following:
41679 x 2 in Dark Gray
41680 x 1 in Light Gray
41681 x 1 in Dark Gray
This combination comes from set 8557-1, Exo-Toa.
Thanks
|
|
Author: | taxan | Posted: | Dec 20, 2021 12:32 | Subject: | Re: Duplo Vehicle Bases - 4883/2312 | Viewed: | 22 times | Topic: | Catalog Requests | |
| In Catalog Requests, taxan writes:
| In Catalog Requests, gmcferrin writes:
| I've been going through and uploading all my Duplo to inventory, and came
across a weird discrepancy. I have 2 vintage parts with the 4883 mold stamp,
but an open hitch end like 2312. I also have another 2 that are stamped with
3884, instead of 4883, but are also the open hitch end. See attached photos.
|
Congratulations you have found probably on of the oldest catalog error on Bricklink.
I have tried to fix this it once. But did not get a responce for it that time.
Part number 2312 & 4883 were incorrectly entered in the database from the beginning
(they switched places) as there was no number on the part back then not until
mold 13.
If a catalog admin read this Please switch the part numbers on those two, the
text and picture are correct.
|
And i forgot to write that 3884 is 4883 molded the wrong way, you need to look
at it through a mirror,
|
|
Author: | taxan | Posted: | Dec 20, 2021 12:25 | Subject: | Re: Duplo Vehicle Bases - 4883/2312 | Viewed: | 29 times | Topic: | Catalog Requests | |
| In Catalog Requests, gmcferrin writes:
| I've been going through and uploading all my Duplo to inventory, and came
across a weird discrepancy. I have 2 vintage parts with the 4883 mold stamp,
but an open hitch end like 2312. I also have another 2 that are stamped with
3884, instead of 4883, but are also the open hitch end. See attached photos.
|
Congratulations you have found probably on of the oldest catalog error on Bricklink.
I have tried to fix this it once. But did not get a responce for it that time.
Part number 2312 & 4883 were incorrectly entered in the database from the beginning
(they switched places) as there was no number on the part back then not until
mold 13.
If a catalog admin read this Please switch the part numbers on those two, the
text and picture are correct.
|
|
Author: | psusaxman2000 | Posted: | Dec 20, 2021 11:44 | Subject: | Re: Ms Marvel Minifigure image missing parts | Viewed: | 41 times | Topic: | Catalog Requests | |
| In Catalog Requests, MEAD_Bricks writes:
| Hi
The Ms marvel minifigure (sh375) is missing 2 parts from her inventory on the
photo :
2 x Medium Nougat Hand Gorilla Fist (fits Minifigure Hand) Catalog: Parts: Minifigure,
Body Part 6167913
I don't have one on my inventory, but the picture should be updated to add
these two parts.
|
There is a secondary photo with the arms unfolded that has the hands included.
If you are selling parts, is best to use the inventory rather then just the
images.
|
|
Author: | MEAD_Bricks | Posted: | Dec 20, 2021 09:53 | Subject: | Ms Marvel Minifigure image missing parts | Viewed: | 98 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| Hi
The Ms marvel minifigure (sh375) is missing 2 parts from her inventory on the
photo :
2 x Medium Nougat Hand Gorilla Fist (fits Minifigure Hand) Catalog: Parts: Minifigure,
Body Part 6167913
I don't have one on my inventory, but the picture should be updated to add
these two parts.
|
Author: | gmcferrin | Posted: | Dec 20, 2021 09:12 | Subject: | Duplo Vehicle Bases - 4883/2312 | Viewed: | 54 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Open | |
| I've been going through and uploading all my Duplo to inventory, and came
across a weird discrepancy. I have 2 vintage parts with the 4883 mold stamp,
but an open hitch end like 2312. I also have another 2 that are stamped with
3884, instead of 4883, but are also the open hitch end. See attached photos.
|
|
|
Author: | randyf | Posted: | Dec 18, 2021 18:23 | Subject: | Re: Separate Grouping Category for Animals | Viewed: | 36 times | Topic: | Catalog Requests | |
| In Catalog Requests, Warden writes:
| I would like to suggest a better way to organize animals/creatures. From this
point forward when I say creature I mean animals as well. When searching for
creatures I find it very difficult to find what I am looking for. When I was
trying to find a certain horse it was difficult because of all the accessories
and pieces that were related.
I Think it would be better if creatures had were organized in their own category
as mini-figs are. The category would include a wide variety of creatures. Such
as the friends animals,the Large trolls from Fantasy Era, dragons, the leopard,
lion and centaur from harry potter. That is just a basic list for example. Some
of the creatures may be included in the mini-fig organization. I do not think
they should be removed from it, just also added to the suggested creature organization.
|
Animals can be easily found by looking in the appropriate catalog categories:
Animal, Air - https://www.bricklink.com/catalogListOld.asp?catType=P&catString=146
Animal, Dinosaur - https://www.bricklink.com/catalogListOld.asp?catType=P&catString=184
Animal, Land - https://www.bricklink.com/catalogListOld.asp?catType=P&catString=147
Animal, Water - https://www.bricklink.com/catalogListOld.asp?catType=P&catString=145
You can get to these categories by browsing the main page for Parts (hover over
the "Market" tab in the header of any page and select "Parts" from under the
"Catalog" side):
https://www.bricklink.com/catalogTree.asp?itemType=P
Once you bring up one of those categories listed above, run a search from the
"Find:" text box to narrow your results. So, for horses, go to the Animal,
Land category, and then narrow your search by "horse" in the "Find:" text
box.
Hope this helps.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Dec 18, 2021 16:40 | Subject: | Re: Move 10236-1 Ewok Village to UCS | Viewed: | 29 times | Topic: | Catalog Requests | |
| In Catalog Requests, 1977_mauro writes:
| Hi Admins,
our UCS list on BL is nearly exactly the same as Brickset's list after my
request to put Death Star 10188 to the list.
Now the unique difference is Ewok Village:
Please move it as well to UCS. The reason is the same like for 10188 - all lists
without any exception do include this set as a UCS set (Brickset, Starwarscollector,
Brickimedia etc.)
Thanks Mauro
|
You're welcome.
|
|
Author: | axaday | Posted: | Dec 18, 2021 16:38 | Subject: | Re: Please Add Categories Under CMF HP and Batman | Viewed: | 17 times | Topic: | Catalog Requests | |
| In Catalog Requests, randyf writes:
| In Catalog Requests, axaday writes:
| Disney is split into Disney and Disney Series 2. Can we have the same for Harry
Potter and Lego Batman Movie?
|
The whole "Collectable Minifigures" area of the catalog was restructured to make
many areas findable by category searches as well as to coincide with the main
theme structures in the catalog. This included splitting "The Simpsons" into
"The Simpsons Series 1" and "The Simpsons Series 2", "Disney" into "Disney Series
1" and "Disney Series 2", "Harry Potter" into "Harry Potter Series 1" and "Harry
Potter Series 2", and "The LEGO Batman Movie" into "The LEGO Batman Movie Series
1" and "The LEGO Batman Movie Series 2". On top of that, all "Super Heroes" themes
in the "Collectable Minifigures" category were grouped under that subcategory.
This included "DC Super Heroes", "Marvel Studios", and "The LEGO Batman Movie".
Now everything from the "Collectable Minifigures" area of the catalog (sets and
figures) can be found by top-level theme searches which could not be accomplished
before.
Cheers,
Randy
|
That all sounds like very good, sensible work. I know it took all week and we
will all appreciate it.
|
|
Author: | axaday | Posted: | Dec 18, 2021 16:36 | Subject: | Re: Please unmark for deletion | Viewed: | 34 times | Topic: | Catalog Requests | |
| In Catalog Requests, randyf writes:
| In Catalog Requests, axaday writes:
| I have here in set 3800 and I can’t start working on it while the
part is marked for deletion for not being in a set. Mine actually measures 197cm.
|
There you go.
|
Thank you
|
Author: | randyf | Posted: | Dec 18, 2021 16:17 | Subject: | Re: Please unmark for deletion | Viewed: | 40 times | Topic: | Catalog Requests | |
| In Catalog Requests, axaday writes:
| I have here in set 3800 and I can’t start working on it while the
part is marked for deletion for not being in a set. Mine actually measures 197cm.
|
There you go.
|
|
Author: | randyf | Posted: | Dec 18, 2021 16:16 | Subject: | Re: Please Add Categories Under CMF HP and Batman | Viewed: | 19 times | Topic: | Catalog Requests | |
| In Catalog Requests, axaday writes:
| Disney is split into Disney and Disney Series 2. Can we have the same for Harry
Potter and Lego Batman Movie?
|
The whole "Collectable Minifigures" area of the catalog was restructured to make
many areas findable by category searches as well as to coincide with the main
theme structures in the catalog. This included splitting "The Simpsons" into
"The Simpsons Series 1" and "The Simpsons Series 2", "Disney" into "Disney Series
1" and "Disney Series 2", "Harry Potter" into "Harry Potter Series 1" and "Harry
Potter Series 2", and "The LEGO Batman Movie" into "The LEGO Batman Movie Series
1" and "The LEGO Batman Movie Series 2". On top of that, all "Super Heroes" themes
in the "Collectable Minifigures" category were grouped under that subcategory.
This included "DC Super Heroes", "Marvel Studios", and "The LEGO Batman Movie".
Now everything from the "Collectable Minifigures" area of the catalog (sets and
figures) can be found by top-level theme searches which could not be accomplished
before.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Dec 18, 2021 16:15 | Subject: | Re: TLBM cmf - series 1 & series 2 split | Viewed: | 29 times | Topic: | Catalog Requests | |
| In Catalog Requests, metropolis1927 writes:
| Hello
Please, in catalog can you split 'series 1' from 'series 2' of
The Lego Batman Movie collectible minifigures?!! As Lego produced.
Please!
Thank you.
Cheers!
Marko
|
The whole "Collectable Minifigures" area of the catalog was restructured to make
many areas findable by category searches as well as to coincide with the main
theme structures in the catalog. This included splitting "The Simpsons" into
"The Simpsons Series 1" and "The Simpsons Series 2", "Disney" into "Disney Series
1" and "Disney Series 2", "Harry Potter" into "Harry Potter Series 1" and "Harry
Potter Series 2", and "The LEGO Batman Movie" into "The LEGO Batman Movie Series
1" and "The LEGO Batman Movie Series 2". On top of that, all "Super Heroes" themes
in the "Collectable Minifigures" category were grouped under that subcategory.
This included "DC Super Heroes", "Marvel Studios", and "The LEGO Batman Movie".
Now everything from the "Collectable Minifigures" area of the catalog (sets and
figures) can be found by top-level theme searches which could not be accomplished
before.
Cheers,
Randy
|
|
Author: | axaday | Posted: | Dec 18, 2021 15:57 | Subject: | Please unmark for deletion | Viewed: | 107 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| I have here in set 3800 and I can’t start working on it while the
part is marked for deletion for not being in a set. Mine actually measures 197cm.
|
|
Author: | randyf | Posted: | Dec 16, 2021 16:47 | Subject: | Re: Please change item numbers | Viewed: | 23 times | Topic: | Catalog Requests | |
| In Catalog Requests, jbroman writes:
| In Catalog Requests, Stellar writes:
| In Catalog Requests, jbroman writes:
| Change: [g=4016g1] to 4016-3
Change: [g=4016g2] to 4016-4
Change: [g=4016g3] to 4016-5
I tried using the form, but got an error.
There is a change pending approval, but they used 4016-1 and 4016-2 which already
exist in the catalog.
|
I thought since the update Sets and Gears could share item numbers.
|
And I thought they could share the item number, but have a suffix added to them
like sets do.
I guess that part wasn’t really clear.
If Stellar is correct, then his numbering (replacing the g with a dash) would
be better.
But I see it as treating gear as sets and having the same numbering convention.
|
I would not want to repeat the "-1" and "-2" used for the sets, because that
would just cause another type of confusion. When you do a search for "4016" from
the top of the page now, you get the sets and the gear "sets" without needing
to add an asterisk or anything else. This was the desired result for this project,
so we are good.
|
|
Author: | Niels_T | Posted: | Dec 16, 2021 15:24 | Subject: | Re: Change inventory 1211-1 | Viewed: | 22 times | Topic: | Catalog Requests | |
| In Catalog Requests, Turez writes:
| In Catalog Requests, Niels_T writes:
| I just add the instructions for set 1211-2
In the text to the left it says You can build this (pitures to the right) from
content of box.
In the pictures to the right, there are 2 different kind of builds, and the build
on top fits the current BL inventory.
But the build below You can clearly see that drawing marked 1 contains 2 pcs
of 31ac01 Red Window 1 x 3 x 2 with Extended Lip and Solid Studs, with Fixed
Glass.
And also have as alternate 2 pcs of 31c Red Window 1 x 3 x 2, without Glass for
Slotted Bricks OR 2 pcs of 31bc01 Red Window 1 x 3 x 2 with Extended Lip, with
Glass.
The bottom drawing also show that 2 pcs of 3005 White Brick 1 x 1 more are needed.
1 on each side of the 1x6 and 1 by the door.
But no indication of the same applies for later set 211-1.
|
This has been completed:
https://www.bricklink.com/messageThread.asp?ID=314127
Thanks for the instructions scan and please let me know if you think there is
still anything wrong.
|
thanks, think this one is perfect, but I think same issue for set 1210-2, but
my set are packed down to check.
|
|
Author: | Warden | Posted: | Dec 16, 2021 13:10 | Subject: | Separate Grouping Category for Animals | Viewed: | 63 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Already Exists | |
| I would like to suggest a better way to organize animals/creatures. From this
point forward when I say creature I mean animals as well. When searching for
creatures I find it very difficult to find what I am looking for. When I was
trying to find a certain horse it was difficult because of all the accessories
and pieces that were related.
I Think it would be better if creatures had were organized in their own category
as mini-figs are. The category would include a wide variety of creatures. Such
as the friends animals,the Large trolls from Fantasy Era, dragons, the leopard,
lion and centaur from harry potter. That is just a basic list for example. Some
of the creatures may be included in the mini-fig organization. I do not think
they should be removed from it, just also added to the suggested creature organization.
I find it very hard to find things like this when I want to find something
that is not a mini-fig. Please consider the suggestion, I would really love to
see this added. Thanks for reading!
|
|
Author: | jbroman | Posted: | Dec 16, 2021 06:36 | Subject: | Re: Please change item numbers | Viewed: | 39 times | Topic: | Catalog Requests | |
| In Catalog Requests, Stellar writes:
| In Catalog Requests, jbroman writes:
| Change: [g=4016g1] to 4016-3
Change: [g=4016g2] to 4016-4
Change: [g=4016g3] to 4016-5
I tried using the form, but got an error.
There is a change pending approval, but they used 4016-1 and 4016-2 which already
exist in the catalog.
|
I thought since the update Sets and Gears could share item numbers.
|
And I thought they could share the item number, but have a suffix added to them
like sets do.
I guess that part wasn’t really clear.
If Stellar is correct, then his numbering (replacing the g with a dash) would
be better.
But I see it as treating gear as sets and having the same numbering convention.
|
|
Author: | Stellar | Posted: | Dec 16, 2021 04:52 | Subject: | Re: Please change item numbers | Viewed: | 32 times | Topic: | Catalog Requests | |
| In Catalog Requests, jbroman writes:
| Change: [g=4016g1] to 4016-3
Change: [g=4016g2] to 4016-4
Change: [g=4016g3] to 4016-5
I tried using the form, but got an error.
There is a change pending approval, but they used 4016-1 and 4016-2 which already
exist in the catalog.
|
I thought since the update Sets and Gears could share item numbers.
|
Author: | randyf | Posted: | Dec 16, 2021 00:39 | Subject: | Re: Please change item numbers | Viewed: | 44 times | Topic: | Catalog Requests | |
| In Catalog Requests, jbroman writes:
| Change: [g=4016g1] to 4016-3
Change: [g=4016g2] to 4016-4
Change: [g=4016g3] to 4016-5
I tried using the form, but got an error.
There is a change pending approval, but they used 4016-1 and 4016-2 which already
exist in the catalog.
|
[g=4016-3]
[g=4016-4]
[g=4016-5]
|
Author: | jbroman | Posted: | Dec 15, 2021 22:43 | Subject: | Please change item numbers | Viewed: | 81 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
| Change: [g=4016g1] to 4016-3
Change: [g=4016g2] to 4016-4
Change: [g=4016g3] to 4016-5
I tried using the form, but got an error.
There is a change pending approval, but they used 4016-1 and 4016-2 which already
exist in the catalog.
|
Author: | axaday | Posted: | Dec 15, 2021 22:26 | Subject: | Re: Create Parts Catalog for 43202-1 | Viewed: | 30 times | Topic: | Catalog Requests | |
| In Catalog Requests, OtherDude writes:
| Not sure if this is where I post this--first time and all.
The Disney Encanto set has Brick, Modified 1 x 4 with Masonry Profile in new
color, Coral.
Thanks,
Other Dude
|
I submitted a picture in coral
|
Author: | rylie_aitch | Posted: | Dec 15, 2021 16:40 | Subject: | Re: Create Parts Catalog for 43202-1 | Viewed: | 30 times | Topic: | Catalog Requests | |
| In Catalog Requests, OtherDude writes:
| Not sure if this is where I post this--first time and all.
The Disney Encanto set has Brick, Modified 1 x 4 with Masonry Profile in new
color, Coral.
Thanks,
Other Dude
|
It won't show up as a "known color" for that part until the set's inventory
has been added. Anyone can contribute set inventories!
Ryan
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|