Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | tpr | Posted: | Oct 22, 2021 04:09 | Subject: | 40% off most Parts - 20% off most minifigs | Viewed: | 59 times | Topic: | Sales | |
|
| Hi
40% off most Parts & Gear - with most Minifigs now at 20% off
https://store.bricklink.com/tpr
Currently only selling to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Sep 28, 2021 15:26 | Subject: | Consistency with naming items | Viewed: | 76 times | Topic: | Catalog Identification | |
|
| Hi
[p=3068bpb0818]
If you enter "Strawberries" you get items with more than one strawberry (Makes
sense),
but if you enter "Strawberry", you get items with more than 1 strawberry (doesn't
make sense)
Thanks
tpr
|
|
Author: | tpr | Posted: | Sep 28, 2021 14:50 | Subject: | Re: Stickers on sheet different | Viewed: | 24 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, jennnifer writes:
| In Catalog Identification, tpr writes:
| Hi
Please can someone confirm and amend if necessary that the 1x6 silver tread stickers
1x6 are not all the same.
If you check them, side by side, they appear to be a print continuation, but
when taken separately they are then different to each other
If you check the 1x6 tile with sticker attached, the picture does not match all
the 4 stickers on the sticker sheet.
I dare say this may happen on other sticker sheets with tread on
Thanks
tpr
|
Probably, but as a seller, I would not want all the treads to be separate entries.
Jen
|
Then the entries affixed to tiles should be noted to that fact then.
I have a stickered tile, but it does not match the one in the photo. If I sell
it, the customer is well within their rights to say it doesn't match the
item they ordered
or
If you try to complete the set, you may not have four different stickers as per
the sticker sheet - you have 2 of 1, 2 of another and none of the other 2
Minefield or what !!
tpr
|
|
Author: | tpr | Posted: | Sep 28, 2021 14:41 | Subject: | Stickers on sheet different | Viewed: | 69 times | Topic: | Catalog Identification | |
|
| Hi
Please can someone confirm and amend if necessary that the 1x6 silver tread stickers
1x6 are not all the same.
If you check them, side by side, they appear to be a print continuation, but
when taken separately they are then different to each other
If you check the 1x6 tile with sticker attached, the picture does not match all
the 4 stickers on the sticker sheet.
I dare say this may happen on other sticker sheets with tread on
Thanks
tpr
|
|
Author: | tpr | Posted: | Sep 26, 2021 03:36 | Subject: | Are these the same person? | Viewed: | 409 times | Topic: | Problem | |
|
| Hi
Check out the sellers of this set for 133 and 137 quantity
Descriptive wording same for both lots
Are they the same person?
tpr
|
Author: | tpr | Posted: | Sep 22, 2021 08:37 | Subject: | Any call for magnets without plastic cover ? | Viewed: | 73 times | Topic: | General | |
|
| Hi
Have a few of these
but without the plastic cover (i.e magnet only)
Is there a market for them, and if so, how would you sell them ?
Thanks
tpr
|
Author: | tpr | Posted: | Sep 22, 2021 03:11 | Subject: | 40% off all Parts and Gear - The Parts Resort | Viewed: | 56 times | Topic: | Sales | |
|
| Hi
40% off ALL Parts & Gear - with Minifigs now at 20% off
includes all items recently added
https://store.bricklink.com/tpr
Currently only selling to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Sep 19, 2021 03:16 | Subject: | 40% off most Parts & Gear - 20% off minifigs | Viewed: | 91 times | Topic: | Sales | |
|
| Hi
40% off most Parts & Gear - with Minifigs now at 20% off
https://store.bricklink.com/tpr
Currently only selling to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Sep 17, 2021 12:24 | Subject: | Re: Help Identifying Die/Dice - non Lego - Photo | Viewed: | 21 times | Topic: | Off Topic | |
|
| In Off Topic, randyf writes:
| In Off Topic, tpr writes:
| In Off Topic, tpr writes:
| Hi
Have picked up a job lot of Used Lego
Included were a couple of dice (as well as marbles etc etc)
The dice are white, with pictures on
One has - Ladder, Axe, Music Notes, Face, Telescope, Bird
Other has - Face, Tent, Egg, Jigsaw Piece, Treasure Chest, Mountains
Any help identifying appreciated
Thanks
tpr
|
|
My kids had this.
https://www.storycubes.com/en/
Not LEGO.
|
Thank You
|
|
Author: | tpr | Posted: | Sep 17, 2021 12:10 | Subject: | Re: Help Identifying Die/Dice - non Lego - Photo | Viewed: | 39 times | Topic: | Off Topic | |
|
| In Off Topic, tpr writes:
| Hi
Have picked up a job lot of Used Lego
Included were a couple of dice (as well as marbles etc etc)
The dice are white, with pictures on
One has - Ladder, Axe, Music Notes, Face, Telescope, Bird
Other has - Face, Tent, Egg, Jigsaw Piece, Treasure Chest, Mountains
Any help identifying appreciated
Thanks
tpr
|
|
|
|
Author: | tpr | Posted: | Sep 17, 2021 12:03 | Subject: | Re: Help Identifying Die/Dice - non Lego | Viewed: | 29 times | Topic: | Off Topic | |
|
| In Off Topic, Classicsmiley writes:
| In Off Topic, tpr writes:
| Hi
Have picked up a job lot of Used Lego
Included were a couple of dice (as well as marbles etc etc)
The dice are white, with pictures on
One has - Ladder, Axe, Music Notes, Face, Telescope, Bird
Other has - Face, Tent, Egg, Jigsaw Piece, Treasure Chest, Mountains
Any help identifying appreciated
Thanks
tpr
|
Are the corners sharp or rounded? Is there any way you can post a picture?
|
Corners rounded
|
|
Author: | tpr | Posted: | Sep 17, 2021 11:54 | Subject: | Help Identifying Die/Dice - non Lego | Viewed: | 96 times | Topic: | Off Topic | |
|
| Hi
Have picked up a job lot of Used Lego
Included were a couple of dice (as well as marbles etc etc)
The dice are white, with pictures on
One has - Ladder, Axe, Music Notes, Face, Telescope, Bird
Other has - Face, Tent, Egg, Jigsaw Piece, Treasure Chest, Mountains
Any help identifying appreciated
Thanks
tpr
|
|
Author: | tpr | Posted: | Sep 17, 2021 06:05 | Subject: | Re: Cloud City Luke? | Viewed: | 40 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, SylvainLS writes:
| In Catalog Identification, yorbrick writes:
| […]
Yeah, they obviously thought Luke was scared when he finds out who his father
is.
|
|
Ones like this, I don't know what the red was meant to be.
|
I don’t know either… a belt? A codpiece?
I guess they added colour before LEGO could stamp hips.
| Superman style underpants?
|
Overpants?
| They look so much better with black legs and hips. I used to switch
the black/red with red/black to get monochrome leg assemblies.
|
I did the reverse… mainly to have uniformity in the uniforms… to depict a time
when there was no real uniform. Kids….
|
Probably the castle chappie was the inventor of the thong, and it took off in
a Galaxy far far Away
tpr
|
|
Author: | tpr | Posted: | Sep 13, 2021 17:07 | Subject: | Re: Is this flag in the catalogue? | Viewed: | 53 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, jennnifer writes:
| In Catalog Identification, tpr writes:
| Hi
Have this 2x2 square flag
It has lego embossed on bottom clip
Thanks for any help
tpr
|
* | | 2335p30 Flag 2 x 2 Square with Rounded Skull and Crossbones on Black Background Pattern on Both Sides (Jolly Roger) Parts: Flag, Decorated |
??
Jen
|
Mouth is wider, nose closer to eyes, slits top and bottom of mouth are triangular
???
|
Author: | tpr | Posted: | Sep 13, 2021 16:37 | Subject: | Is this flag in the catalogue? | Viewed: | 237 times | Topic: | Catalog Identification | |
|
| Hi
Have this 2x2 square flag
It has lego embossed on bottom clip
Thanks for any help
tpr
|
|
Author: | tpr | Posted: | Sep 13, 2021 11:45 | Subject: | Hoze Nozzle with String - new variant ?? | Viewed: | 90 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| Hi
Should the green one be on a separate variant.
The yellow, Black and Grey use Black string, the Green one has Green string.
There is no way of knowing this until you click on the colour.
The description of 194cx1 should state black string, and a new variant for green
string should be created
If I have assumed incorrectly, can anyone explain why they are all on one item
tpr
|
|
Author: | tpr | Posted: | Sep 9, 2021 07:07 | Subject: | 40% off all Parts & Gear - 20% off Minifigs | Viewed: | 50 times | Topic: | Sales | |
|
| Hi
40% off all Parts & Gear - with Minifigs now at 20% off
https://store.bricklink.com/tpr
Currently only selling to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Sep 7, 2021 03:53 | Subject: | 40% off all Parts & Gear - 20% off Minifigs | Viewed: | 81 times | Topic: | Sales | |
|
| Hi
40% off Sale now extended to all Parts & Gear
with Minifigs now at 20% off
https://store.bricklink.com/tpr
Currently only selling to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Sep 5, 2021 02:01 | Subject: | 40% off Bricks, Plates and Slopes | Viewed: | 67 times | Topic: | Sales | |
|
| Hi
Sale
40% off Bricks, Plates and Slopes (and associated categories - Modified, Round,
Inverted etc)
33% off all Gear items
and 33% off of a lot of other part items
https://store.bricklink.com/tpr
Currently only selling to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Aug 27, 2021 06:15 | Subject: | Store closing for 1 week - 33% sale still on | Viewed: | 29 times | Topic: | General | |
|
| Hi
Closing the store today (Friday 27th Aug) for 1 week - long needed break !!
Will re-open Friday 3rd September.
Closing at 3pm UK time
Still 33% off most Parts and Gear items
https://store.bricklink.com/tpr
Currently only selling to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Aug 21, 2021 05:52 | Subject: | Store closing for 1 week - 33% sale still on | Viewed: | 47 times | Topic: | General | |
|
| Hi
Closing the store next Friday (27th Aug) for 1 week - long needed break !!
Will re-open Friday 3rd September.
Still 33% off most Parts and Gear items
https://store.bricklink.com/tpr
Currently only selling to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Aug 19, 2021 11:13 | Subject: | Torso needs amending | Viewed: | 86 times | Topic: | Catalog Identification | |
|
| Hi
If you are searching through torso assemblies for the above, you would disregard
it as it appears to be printed one side only.
Its only when you check the torso, it shows 2 sided print.
Can the description of the assembly be amended to incorporate the reverse, or
a budding photographer submit a new picture.
Thanks
tpr
|
|
Author: | tpr | Posted: | Aug 14, 2021 09:30 | Subject: | Re: Time for another contest... | Viewed: | 17 times | Topic: | Contests | |
|
| 749
In Contests, popsicle writes:
| Contest prize is a brand new minifig from 2006
New, unassembled, with original weapon from set.
Guess the number of 1x2 tiles contained within this 6" diameter vase, as shown
Contest rules are simple:
~ One post per day per member, otherwise no limit to number of entry-days.
~ Entry must be made as a reply to this contest post.
~ First to correctly answer, wins!
We’ll cover the shipping cost domestically (free shipping) Members outside of
the US (worldwide) are welcome to participate if you can offer a US shipping
address should you win. For non US based members, any address within the US will
do: friend, family member or fellow BL members are fine.
Your contest moderator this time around, is someone known to most here; a man
with a plan, the all knowing demigod of the forum, and basically all around good
guy Johan (jbroman) of Big Boy’s Bricks
I’ll send Johan the winning answer, he’ll determine and announce the winner.
Please direct any questions Johan's way, your contest moderator: https://www.bricklink.com/feedback.asp?u=jbroman
Have fun
-The Christman Family
|
|
|
Author: | tpr | Posted: | Aug 14, 2021 02:34 | Subject: | 33% off all Parts & Gear at The Parts Resort | Viewed: | 57 times | Topic: | Sales | |
|
| Hi
Sale
33% off ALL Parts and Gear items
https://store.bricklink.com/tpr
Currently only selling to the UK
Thanks
tpr
|
|
Author: | tpr | Posted: | Aug 9, 2021 11:26 | Subject: | Re: Description error ? | Viewed: | 17 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, paulvdb writes:
| In Catalog Identification, tpr writes:
| Hi
* | | 3626bpb0639 Minifigure, Head Moustache Mutton Chops with Dark Tan and Gray Sideburns, Dark Tan and Gray Eyebrows, Pupils Pattern - Blocked Open Stud Parts: Minifigure, Head |
* | | 3626cpb0639 Minifigure, Head Moustache Mutton Chops with Dark Tan and Gray Sideburns, Dark Tan and Gray Eyebrows, Pupils Pattern - Hollow Stud Parts: Minifigure, Head |
Same part but with different stud arrangement
except for the description - if one was brown and one dark tan, shouldn't
they be on different numbers ?
except i think the bpb description is incorrect, as i have this with blocked
open stud and it is definitely dark tan
Thanks
tpr
|
The name of the c version was changed from brown to dark tan in January but the
b version wasn't. I have changed that one now.
|
Thank You
|
|
Author: | tpr | Posted: | Aug 9, 2021 07:00 | Subject: | Description error ? | Viewed: | 83 times | Topic: | Catalog Identification | |
|
| Hi
* | | 3626bpb0639 Minifigure, Head Moustache Mutton Chops with Dark Tan and Gray Sideburns, Dark Tan and Gray Eyebrows, Pupils Pattern - Blocked Open Stud Parts: Minifigure, Head |
* | | 3626cpb0639 Minifigure, Head Moustache Mutton Chops with Dark Tan and Gray Sideburns, Dark Tan and Gray Eyebrows, Pupils Pattern - Hollow Stud Parts: Minifigure, Head |
Same part but with different stud arrangement
except for the description - if one was brown and one dark tan, shouldn't
they be on different numbers ?
except i think the bpb description is incorrect, as i have this with blocked
open stud and it is definitely dark tan
Thanks
tpr
|
|
Author: | tpr | Posted: | Jul 24, 2021 06:31 | Subject: | Classic Space Torso - White Moon | Viewed: | 76 times | Topic: | Catalog Identification | |
|
| Hi
Have a few of these in Red with White Moons - doesn't look like gold has
worn off or been removed.
Question is - Were these ever made with just the white moon?
Thanks
tpr
|
Author: | tpr | Posted: | Jul 23, 2021 17:13 | Subject: | Third order received - no name | Viewed: | 159 times | Topic: | Technical Issues | |
|
| Hi
Have received three orders from 0 feedback buyers in the last couple of weeks,
and on the orders received page i have it set up to show buyers name, and there
is no name, just the (0) feedback and the green hat symbol.
Is there a glitch in the system that is allowing this?
tpr
|
Author: | tpr | Posted: | Jul 19, 2021 11:52 | Subject: | Two different torso's ?? | Viewed: | 108 times | Topic: | Catalog Identification | |
|
| Hi
Take a look at the pictures in the catalogue of
The shirt - is it two different colours ?
The picture i have taken is not totally clear - but as in the catalogue, one
is a green based colour and the other a blue
Variants needed? or notes need attaching ?
Thanks
tpr
|
|
Author: | tpr | Posted: | Jul 14, 2021 01:21 | Subject: | Re: Torso ID | Viewed: | 30 times | Topic: | Help | |
|
| In Help, Brickworld writes:
| Can someone ID these two torsos? Thanks
|
Have they got the Lego stamp on the top of the neck piece?
If so, what are the torso base colours?
tpr
|
Author: | tpr | Posted: | Jul 13, 2021 03:26 | Subject: | 33% off all Parts and Gear - The Parts Resort | Viewed: | 51 times | Topic: | Sales | |
|
| Hi
Sale continues...
33% off ALL Parts and Gear items
https://store.bricklink.com/tpr
Currently only selling to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Jul 9, 2021 06:13 | Subject: | 33% off all Parts and Gear - The Parts Resort | Viewed: | 46 times | Topic: | Sales | |
|
| Hi
33% off ALL Parts and Gear items
https://store.bricklink.com/tpr
Currently only delivering to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Jul 7, 2021 04:23 | Subject: | Is this definition correct? | Viewed: | 77 times | Topic: | Catalog Identification | |
|
| Hi
Curved top ?
The top is actually flat as it has 2 studs side by side.
The sides are curved
tpr
|
Author: | tpr | Posted: | Jul 5, 2021 04:48 | Subject: | Bricklink Fees - VAT changes? | Viewed: | 116 times | Topic: | Help | |
|
| Hi
Just noticed my latest invoice for fees stated VAT at 0%
previously it was 20%
Has this again altered - or is there a mistake?
Thanks
tpr
|
Author: | tpr | Posted: | Jun 26, 2021 05:26 | Subject: | 30% off all Parts and Gear - The Parts Resort | Viewed: | 50 times | Topic: | Sales | |
|
| Hi
30% off ALL Parts and Gear items
https://store.bricklink.com/tpr
Currently only delivering to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Jun 21, 2021 02:25 | Subject: | 28% off all Parts and Gear | Viewed: | 40 times | Topic: | Sales | |
|
| Hi
28% off ALL Parts and Gear items
https://store.bricklink.com/tpr
Currently only delivering to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Jun 20, 2021 10:59 | Subject: | Re: Who can identify this part? | Viewed: | 39 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, Gaston.La.Brick writes:
| Hi,
on the inside, there is "Lego Group" and a part number that is very hard to read.
Best I could see, was 11164. But that's not a valid part.
Who knows this item?
Cheers,
Henri
|
Hi
It is 11164 but as they are multicoloured they have extension letters and numbers
after them
Try 11164*
Regards tpr
|
|
Author: | tpr | Posted: | Jun 18, 2021 02:22 | Subject: | Re: How did you come up with your BL persona... | Viewed: | 42 times | Topic: | Off Topic | |
|
| In Off Topic, popsicle writes:
| ... username, store name and ID card (continued) https://www.bricklink.com/message.asp?ID=1231631
Just spontaneous thoughts when creating your account, or were there personal
significance to any of the three bits of proffered self-identification?
No matter how trivial you might think it, others often find such things vicariously
enjoyable. Even if your post seems inconsequential to you, it's often not
to others and can be a fun distraction for both author and readers alike.
Some of the best reads here over the years for me, have been the more personable
anecdotes. I’d like to read yours. That is if you're bold enough to share?
-popsicle
|
tpr - my step sons initials.
Used them when i wrote for a local newspaper as "The Press Reporter" (tpr)
then on here as tpr with my shop "The Parts Resort" (tpr)
The picture is of a playing card my grandson had - probably Megablocks (!!)
tpr
|
|
Author: | tpr | Posted: | Jun 16, 2021 07:03 | Subject: | Re: Leg identifications please | Viewed: | 19 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, Turez writes:
| In Catalog Identification, tpr writes:
| Hi
Any help appreciated
Thanks
tpr
|
|
Thank you
tpr
|
|
Author: | tpr | Posted: | Jun 16, 2021 05:46 | Subject: | Leg identifications please | Viewed: | 64 times | Topic: | Catalog Identification | |
|
| Hi
Any help appreciated
Thanks
tpr
|
|
Author: | tpr | Posted: | Jun 15, 2021 03:23 | Subject: | Re: Leg identifications please | Viewed: | 28 times | Topic: | Catalog Identification | |
|
| In Catalog Identification, tpr writes:
| Hi
Any help appreciated
In the picture of 2, the one on the left is:-
its the one on the right - no signs of any red missing or fading
Thanks
tpr
|
Hi
Just found the scales one, no mention of red on belt !!!!!
tpr
|
Author: | tpr | Posted: | Jun 15, 2021 03:22 | Subject: | Leg identifications please | Viewed: | 64 times | Topic: | Catalog Identification | |
|
| Hi
Any help appreciated
In the picture of 2, the one on the left is:-
its the one on the right - no signs of any red missing or fading
Thanks
tpr
|
|
Author: | tpr | Posted: | Jun 15, 2021 03:06 | Subject: | Better descriptions please | Viewed: | 92 times | Topic: | Catalog Requests | For: | Catalog Associate | Status: | Completed | |
|
| Hi
vague description?
Can the red please be removed from the description as if you check the white
one, there is no red !! The red part is part of the actual leg colour
Thanks
tpr
|
|
Author: | tpr | Posted: | Jun 11, 2021 10:24 | Subject: | Re: Paypal issues | Viewed: | 50 times | Topic: | Problem | |
|
| In Problem, calsbricks writes:
| Not affecting everyone it seems but at least 500 of us in the UK have not been
able to log into Paypal since 0700 this morning. First they told us it was a
security issue, then they changed their mind and said it was an issue with one
of the phone companies and just now they said no chance of it getting fixed today
- try tomorrow. What a way to run a business.
Good grief Charlie Brown.
|
Just tried - logged straight in - all ok
tpr
|
Author: | tpr | Posted: | Jun 8, 2021 03:09 | Subject: | 25% off all Parts & Gear | Viewed: | 41 times | Topic: | Sales | |
|
| Hi
25% off ALL parts and GEAR items
https://store.bricklink.com/tpr
Currently only delivering to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Jun 7, 2021 14:36 | Subject: | Help required on Iron Man Visors please | Viewed: | 67 times | Topic: | Catalog Identification | |
|
| Hi
has this one been produced with no Logo inside?
I have this with the Lego Logo inside with code 32962 instead of 10908 ?
Thanks for any info
tpr
|
Author: | tpr | Posted: | Jun 7, 2021 11:55 | Subject: | Set 41038 - part error? | Viewed: | 42 times | Topic: | Catalog Identification | |
|
| Hi
I have this on
anyone have any available to check and if it is on 15210 put in an amendment
or alternate
Thanks
tpr
|
|
Author: | tpr | Posted: | Jun 5, 2021 02:47 | Subject: | Re: Double entry for part | Viewed: | 39 times | Topic: | Catalog Requests | |
|
| In Catalog Requests, patrizio84 writes:
| Hi,
When browsing the newly added parts I noticed 3068bpb1715 (Tile 2 x 2 with Groove
with 'PLAY MAKERS' Pattern) was added which looks to be the same part
as 3068bpb1466 (Tile 2 x 2 with Groove with Bicycle Wheel, Red Ball and 'PLAY
MAKERS' Logo Pattern).
Unless there's a subtle difference I failed to notice the 1715 probably should
be deleted.
Regards, Patrick
|
[p=3068bpb1715]
[p=3068bpb1466]
|
Author: | tpr | Posted: | Jun 4, 2021 10:16 | Subject: | Any call for magnet only ? | Viewed: | 122 times | Topic: | General | |
|
| Hi
I have 3 magnets from
but it is the magnet only
Is there any call for them, and if so, how would you list them
tpr
|
Author: | tpr | Posted: | May 28, 2021 12:02 | Subject: | Identification please | Viewed: | 78 times | Topic: | Catalog Identification | |
|
| Hi
I'm 99.9% sure these aren't Lego, anyone know what they might be from
Thanks
tpr
|
|
Author: | tpr | Posted: | May 28, 2021 11:24 | Subject: | Re: 1x1 Round Brick 3062a & 3062b | Viewed: | 38 times | Topic: | General | |
|
| In General, Laurie4784 writes:
| What is the difference between 3062a and 3062b? The pictures look the same.
|
[p=3062b]
Read the description
tpr
|
Author: | tpr | Posted: | May 24, 2021 03:13 | Subject: | 50% off all NEW parts | Viewed: | 68 times | Topic: | Sales | |
|
| Hi
50% off ALL NEW parts.
Also 50% off some USED parts and GEAR items
https://store.bricklink.com/tpr
Currently only delivering to the UK
Thanks
tpr
|
Author: | tpr | Posted: | Apr 15, 2021 10:51 | Subject: | Admins - for your consideration | Viewed: | 159 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi
is in Wheels - Accessory --- totally understandable
is in Wheels.
It states its a holder, it won't move on its own !! Its not a wheel !!
Should it not be considered in the next batch of items to be moved, and move
it to Wheels Accessories
Thanks
tpr
|
|
Author: | tpr | Posted: | Apr 7, 2021 16:40 | Subject: | Re: Chrome Silver Legs - confirmation | Viewed: | 38 times | Topic: | Catalog | |
|
| In Catalog Identification, popsicle writes:
| | Hi
Can anyone confirm the base colour of the Hips and Legs that are Chrome Silver
|
Having parted quite a few of both over the years...
I’ve seen white and light bluish gray ABS used in both torso and leg assemblies.
Why is it you'd like to know, Susan? What is it you're trying to understand?
-popsicle
|
Just confirming if the ones i have are genuine - they have Lego logo - but you
never know
tpr
|
|
Author: | tpr | Posted: | Apr 7, 2021 15:12 | Subject: | Re: Chrome Silver Legs - confirmation | Viewed: | 32 times | Topic: | Catalog | |
|
| Hi
Mine has Light Bluish Gray protrusions at the top !
tpr
In Catalog Identification, starbeanie writes:
| i've seen both tan and milky white
In Catalog Identification, tpr writes:
| Hi
Can anyone confirm the base colour of the Hips and Legs that are Chrome Silver
Thanks
tpr
|
|
|
Author: | tpr | Posted: | Apr 7, 2021 14:53 | Subject: | Chrome Silver Legs - confirmation | Viewed: | 111 times | Topic: | Catalog | Status: | Open | |
|
| Hi
Can anyone confirm the base colour of the Hips and Legs that are Chrome Silver
Thanks
tpr
|
|
Author: | tpr | Posted: | Mar 16, 2021 05:52 | Subject: | Re: Two Weeks?! - Question | Viewed: | 27 times | Topic: | Catalog | |
|
| In Catalog, StormChaser writes:
| In Catalog, tpr writes:
| In the catalogue of each item - when changed, will there be a log/change note
to say where it was moved from?
|
We have this:
https://www.bricklink.com/help.asp?helpID=2487
We may also temporarily put remarks in the titles of items - not sure about that.
I know someone else asked for it.
|
That helps not a lot of use when picking an order.
You have change logs in the catalogue now, won't this change be part of that.
tpr
|
|
Author: | tpr | Posted: | Mar 16, 2021 05:47 | Subject: | Re: Two Weeks?! - Question | Viewed: | 44 times | Topic: | Catalog | |
|
| In Catalog, Teup writes:
| This is not a big deal for me personally as I am not currently selling here,
so I can plan it when I want.. but... really?!
The catalog changes are scheduled for April 1. That's only 2 weeks away.
I noticed that this is a DRAMATIC catalog update that will throw the entire store
upside down. Definitely won't be able to take my entire 1.2 million parts
store apart and piece it back together just casually within these next two weeks
between sorting orders. Especially moving all the wedges will be be fun puzzle.
Not gonna object against any changes, they seem alright to me. Except that there's
one change clearly missing from that list: Moving the 2x2 corner brick to Brick,
Modified.. (since plate and tile are there)
I hope this really was THE update everyone was waiting for, and now we're
satisfied..
|
Hi
In the catalogue of each item - when changed, will there be a log/change note
to say where it was moved from?
At least then i can move stock as and when i need to, or find it without having
to move it !!!
Hope this makes sense
Thanks
Tpr
|
|
Author: | tpr | Posted: | Mar 2, 2021 08:39 | Subject: | Re: Inventory Change Request for Minifig tlm145 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, CommanderKeen writes:
| Please make changes to the following inventory:
* Add 1 Part 40938 Dark Brown Minifigure, Hair Short Tousled with 2 Locks on Left Side
Comments from Submitter:
The source is from Lego Manual for set 70831 page 7.
|
Hi
The hair is in the set inventory.
A minifig can only have one item on their head.
The minifig has the helmet - the hair is classed as an extra item
tpr
|
|
Author: | tpr | Posted: | Feb 16, 2021 09:24 | Subject: | Re: Adjusting Colour Names such as Bluish Grey? | Viewed: | 42 times | Topic: | Suggestions | |
|
| In Suggestions, axaday writes:
| Among the MOST confusing things we could do would be changing the name of a color
to the name that we just took away from another color.
|
But it could be possible.
You could change Lt Grey etc to "Classic" or "Old" immediately and you could
give a notice period of when bluish grey would change to the existing Lt Grey
etc - during which time members and new members would get used to the Classic
colours
tpr
|
In Suggestions, infinibrix writes:
| It will be known to many that I’ve always favoured the idea of using official
Lego colour names not because I like them better or think they describe the
colours better (Many are very odd choices!) but simply because it creates less
uncertainty about what I’m selling and what the customer thinks they are buying
however I’ve made that argument already and now’s probably the time to accept
that Bricklink colour names are unlikely to match that of the Lego group!
However one thing that has always jarred me somewhat is the use of the term ‘Bluish’
to describe the greys when I’m sure if it was’nt for the need to fit around the
older existing greys already in the catalog both would have no doubt just been
given the simple description Dark/Light Grey instead of Dark/Light Bluish Grey?
The thing is the way I see it Bricklink uses its own colour names for three main
reasons:-
A) Lego never provided a colour name for them to use (at least not in the early
days!)
B) They wanted their colour names to better describe and match the actual shade
of colour!
C) They wanted their colour names to be short and to the point!
However when it comes to those last two points colours like ‘Dark Bluish Grey’
and ‘Light Bluish Grey’ both fail to meet that ideal objective compared to most
of the other colour names that have been created by Bricklink. Both descriptions
are lengthy and somewhat misleading? If anything I see more ‘Bluish Grey’ in
a colour like Sand blue than either of these two greys and when all said and
done they are basically just Light and Dark Grey?
So what does it matter and what to do?
Well because they are both what I would call very common CORE central colours
in Legos colour palette it stands to reason that we should perhaps think about
giving them the most suitably descriptive name for them (Light and Dark grey?)
after all that is what any newbie or anyone else for that matter would define
them as?
Both of these colours are ‘very current’ where as the discontinued greys are
not so current and therefore probably don’t warrant the need for the best descriptive
name for them any longer? In fact if we were to rename the existing Light and
Dark Grey as ‘Old Light Grey’ or ‘Classic Light Grey’ I think this would also
be very helpful to newbies when they are confronted with so many different shades
of grey?
I would also consider using the ‘Old/Classic’ tag for some other discontinued
colours too like Brown i.e ‘Old Brown’ I have less problem with Reddish brown
remaining as that is at least what Lego themselves call it but ‘bluish’ is a
made up bricklink term that has little relevance to the actual colour nor does
Lego use the term? Lego may have added more blue to the actual colour mix than
the old greys but in appearance they are simply intended to be a Light and Dark
Grey in a new and current form hence I feel we should refer to them as such?
Also wherever we use the term ‘Very Light’ can I suggest using the term ‘Pale’.
i.e ‘Pale Grey’ instead of ‘Very Light Bluish Grey’ as shorter names are much
easier for people to read off the site and to label/Inventory their stocks even
if that does mean some initial disruption?
Lastly shouldn’t we at least try and mirror Lego’s reference to Grey and use
‘Grey’ instead of ‘Gray’ in the descriptions?
I hope others will share the same logic in what I’m trying to suggest or perhaps
I’m barking up the wrong tree? Thoughts?
|
|
|
|
Author: | tpr | Posted: | Jan 27, 2021 03:15 | Subject: | Re: Not include UK in EU search | Viewed: | 42 times | Topic: | Suggestions | |
|
| In Suggestions, jek writes:
| Hi.
When I select "EU" as Seller-location search-filter, it still includes UK shops,
even thought they are no longer part of the EU.
I know there are suggestions and discussions before regarding VAT handling, which
I understand might be slightly more complicated to implement. But simply excluding
UK as part of the EU selection for filtering seems like a simple fix to me...
|
Hi
Is that EU or Europe - afaik we are still in Europe !!
|
|
Author: | tpr | Posted: | Jan 17, 2021 04:18 | Subject: | Re: Can Sets and Minifigs be Listed Twice? | Viewed: | 27 times | Topic: | Inventories | |
|
| In Inventories, Lego_My_Waffle writes:
| For lego sets that I'm selling, is there anyway to connect the minifigs to
the set? What I'm look for is a way to list a set as sealed while also listing
the minfigs, so that someone could either buy the set whole or someone could
purchase the minfigs in which case I'll open the box and sell them.
Is this possible? Or do I have to choose whether to list either the whole set
or the minfigs it comes with?
|
You can't sell something you haven't got
I understand what you are saying, but in theory you have 2 lots of mininfigs
(one in the box and 1 separate)
What happens if someone buys the set and the same time someone buys the minifigs
tpr
|
|
Author: | tpr | Posted: | Jan 10, 2021 10:32 | Subject: | Re: Please add a Condition "Broken" to Parts | Viewed: | 48 times | Topic: | Suggestions | |
|
| In Suggestions, BrickBuilderAG writes:
| Please add a condition "Broken" to parts so that the when someone searches for
used parts broken parts don't come up in the search.
|
You will be wanting to add "Incomplete Minifigs" next !!
|
Author: | tpr | Posted: | Jan 6, 2021 06:40 | Subject: | Re: Snowman or not Snowman ?? | Viewed: | 37 times | Topic: | Catalog | |
|
| In Catalog, Ninepartsred writes:
| In Catalog, tpr writes:
| Hi
are classed as snowmen, but
is just parts
But hol130 and 60063-4 are both from advent calendars
Explanation please
tpr
|
Looks like one to me. Pretty much the same as
|
Different hat, arms, base - otherwise close
|
|
Author: | tpr | Posted: | Jan 6, 2021 06:05 | Subject: | Snowman or not Snowman ?? | Viewed: | 87 times | Topic: | Catalog | Status: | Open | |
|
| Hi
are classed as snowmen, but
is just parts
But hol130 and 60063-4 are both from advent calendars
Explanation please
tpr
|
|
Author: | tpr | Posted: | Dec 23, 2020 09:44 | Subject: | Re: 2x2 Brick - which is correct? | Viewed: | 41 times | Topic: | Catalog | |
|
| Hi
But if you have a second hand thick walled 2x2 brick, how do you know if it is
a 3003old if you are putting new ones in 3003?
tpr
In Catalog, maxx3001 writes:
| In Catalog, patpendlego writes:
| IMO the seperate catelog entry 3003old is questionable. 3001old and 3002old are
clear, these do not have cross support as 3001 and 3002 do. But 3003 does not
come with cross support, and never have. However 3001 and 3002 do come with and
without inner supports but there is no seperate entry for those. So why 3003old?
I do not know. Clearly it raises more questions than answers.
|
The inner supports talked about are the ribs on the thin sides, the old bricks
had thick walls.
I think you mixed up the cross supports with those.
Maybe come back to LEGO more
Anyway, the 3003old does have a function for the older thick walled 3003 bricks.
But as the OP points out, there are still thick walled bricks being made.
Especially in trans colors.
I would add the new 3003 thick walled bricks under 3003, not 3003old.
Maxx
| In Catalog, tpr writes:
| Hi
Question for all you purists
3003 has inside supports, 3003old doesn't - no problem with that
The trans coloured ones (i have trans-green to hand), do not have the internal
supports, but are treated at 3003 and not 3003old, as they are still being produced.
Surely this is incorrect
Can someone explain why bricks modelled as 3003old are being labelled as 3003
- and how do you explain that to someone if they wanted to add a red brick to
the catalogue!
Thanks
tpr
|
|
|
|
|
Author: | tpr | Posted: | Dec 23, 2020 08:57 | Subject: | Re: 2x2 Brick - which is correct? | Viewed: | 33 times | Topic: | Catalog | |
|
| In Catalog, patpendlego writes:
| IMO the seperate catelog entry 3003old is questionable. 3001old and 3002old are
clear, these do not have cross support as 3001 and 3002 do. But 3003 does not
come with cross support, and never have. However 3001 and 3002 do come with and
without inner supports but there is no seperate entry for those. So why 3003old?
I do not know. Clearly it raises more questions than answers.
In Catalog, tpr writes:
| Hi
Question for all you purists
3003 has inside supports, 3003old doesn't - no problem with that
The trans coloured ones (i have trans-green to hand), do not have the internal
supports, but are treated at 3003 and not 3003old, as they are still being produced.
Surely this is incorrect
Can someone explain why bricks modelled as 3003old are being labelled as 3003
- and how do you explain that to someone if they wanted to add a red brick to
the catalogue!
Thanks
tpr
|
|
Hi
The "supports" in 3003 are more like friction ridges - not supports
tpr
|
|
Author: | tpr | Posted: | Dec 23, 2020 08:27 | Subject: | 2x2 Brick - which is correct? | Viewed: | 133 times | Topic: | Catalog | Status: | Open | |
|
| Hi
Question for all you purists
3003 has inside supports, 3003old doesn't - no problem with that
The trans coloured ones (i have trans-green to hand), do not have the internal
supports, but are treated at 3003 and not 3003old, as they are still being produced.
Surely this is incorrect
Can someone explain why bricks modelled as 3003old are being labelled as 3003
- and how do you explain that to someone if they wanted to add a red brick to
the catalogue!
Thanks
tpr
|
|
Author: | tpr | Posted: | Oct 31, 2020 11:20 | Subject: | Re: Catalogue Change Page modification? | Viewed: | 15 times | Topic: | Suggestions | |
|
| In Suggestions, popsicle writes:
| In Suggestions, tpr writes:
| In Suggestions, popsicle writes:
| In Suggestions, tpr writes:
| Hi
Just put in 2 requests to change names of items using -
Catalogue Add/Change Page
When you enter the item code (ie 30222 for popsicle)
there is no notification or display showing the item you have entered
It would be therefore possible to input the item incorrectly (to another that
exists)
and modify it.
Would it not be prudent to show the details of the item you are changing, before
you change it - so as to stop possible errors
Thanks
|
Just to be clear, do you mean one more page to view that which you're about
to submit, for a once-over prior to the Submit Request tab?
If that's your suggestion, I'm on-board. As it stands now, I'll go
back through my contributions just after submitting, via the
My Activity Overview page. If I find that I've done it wrong or that
it could be better, I delete the submission to resubmit. So an edit page prior
to the Submit Request tab might be handy.
However, when adding or changing pics, you do kinda have such an opportunity
in the uploading of the pic-file step.
-popsicle
|
this page
https://www.bricklink.com/catalogReq.asp
Tracy
|
Yeah, I know the page. And?
|
Hi
Not quite sure what you mean, but if you go on that page and enter an item number,
you have no idea what it is? There is no description showing. So if you wanted
to change the title of the item, you would either have to paste and edit beforehand,
or have a good memory
Tracy
|
|
Author: | tpr | Posted: | Oct 31, 2020 11:15 | Subject: | Re: Catalogue Change Page modification? | Viewed: | 24 times | Topic: | Suggestions | |
|
| In Suggestions, popsicle writes:
| In Suggestions, tpr writes:
| Hi
Just put in 2 requests to change names of items using -
Catalogue Add/Change Page
When you enter the item code (ie 30222 for popsicle)
there is no notification or display showing the item you have entered
It would be therefore possible to input the item incorrectly (to another that
exists)
and modify it.
Would it not be prudent to show the details of the item you are changing, before
you change it - so as to stop possible errors
Thanks
|
Just to be clear, do you mean one more page to view that which you're about
to submit, for a once-over prior to the Submit Request tab?
If that's your suggestion, I'm on-board. As it stands now, I'll go
back through my contributions just after submitting, via the
My Activity Overview page. If I find that I've done it wrong or that
it could be better, I delete the submission to resubmit. So an edit page prior
to the Submit Request tab might be handy.
However, when adding or changing pics, you do kinda have such an opportunity
in the uploading of the pic-file step.
-popsicle
|
this page
https://www.bricklink.com/catalogReq.asp
Tracy
|
|
Author: | tpr | Posted: | Oct 31, 2020 10:07 | Subject: | Catalogue Change Page modification? | Viewed: | 84 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi
Just put in 2 requests to change names of items using -
Catalogue Add/Change Page
When you enter the item code (ie 30222 for popsicle)
there is no notification or display showing the item you have entered
It would be therefore possible to input the item incorrectly (to another that
exists)
and modify it.
Would it not be prudent to show the details of the item you are changing, before
you change it - so as to stop possible errors
Thanks
tpr
|
|
Author: | tpr | Posted: | Mar 18, 2020 11:19 | Subject: | Panel needs checking please | Viewed: | 83 times | Topic: | Catalog | Status: | Open | |
|
| Hi
* | | 4215pb003 Panel 1 x 4 x 3 with Blue, Red and Silver Space Mechanical Pattern on Inside (Sticker) - Set 6949 (Undetermined Type) Parts: Panel, Decorated Marked for Deletion |
I have this item with solid studs, so should be under 4215a
It is currently under 4215 which is undetermined.
Can anyone check the third picture - comes up too small for me, to see the studs
If they are solid, which I think they are, this wants re-assigning to a 4215a
number
Thanks
tpr
|
|
Author: | tpr | Posted: | Feb 26, 2020 06:12 | Subject: | Re: Add rejected to payment status options | Viewed: | 23 times | Topic: | Suggestions | |
|
| In Suggestions, WildBricks writes:
| I have found an order to be stuck in limbo land. A buyer paid with PayPal through
instant check-out, but his payment was flagged to hold because it hadn't
cleared. Then PayPal rejected his payment. Because he went through instant check-out
I cannot reset his payment status to NONE, therefore I cannot place a NPB on
the order.
I would like to see a status of REJECTED added to payments. I'm sure I'm
not the first one to have this problem.
|
Will a status of rejected help?
If you cannot set to NPB, you cannot get your fees refunded as a non transaction
Surely you want to be able to access the NPB if there is a problem, not add another
option
tpr
|
|
Author: | tpr | Posted: | Feb 25, 2020 15:57 | Subject: | Order page totals in different colours | Viewed: | 88 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi
On the orders page, the grand total is Black, and when the order is marked as
paid by either buyer or seller it is Black, but Bold.
Is it possible to have these as 2 different colours for clarity.
Also it changes to bold when marked as paid, but when marked as Packed (which
happens after paid) if the buyer hasn't marked as paid, it goes back to original
type. Please can it remain at Bold.
Thanks
tpr
|
|
Author: | tpr | Posted: | Feb 2, 2020 07:48 | Subject: | PUT COLOURS BACK & DISCUSS WITH LEGO | Viewed: | 202 times | Topic: | Catalog | Status: | Open | |
|
| Hi
For now as we have more changes in discussion, can't we put the colours back
to how they were. I'm sure a few more days/weeks of flesh isn't going
to hurt us.
Then discuss with the Lego Company regarding changing all colours to their colours
- we are part of their group. What they say will be correct !!
tpr
|
|
Author: | tpr | Posted: | Feb 2, 2020 04:39 | Subject: | Re: Nougat is the new Flesh .... for now | Viewed: | 61 times | Topic: | Colors | |
|
| Hi
No problem in you changing the colours but
yesterday Med Dk Flesh was Med Dark Nougat
today its Medium Nougat
No notification re the change other than this thread in the forum
Not everyone reads the forum
Please make ALL aware of your changes … and …. get it right first time before
changing a change. What's it to be tomorrow ?
tpr
In Colors, Admin_Russell writes:
| For those who may have missed this recent change, we have decided to change the
name "Flesh" to another color name in the BrickLink catalog. I'm not going
to get into the reasons why this was done - the purpose here is to inform you
of what the changes were and how they may affect your BrickLink user experience.
The changes are 5 in number:
1. Light Flesh becomes Light Nougat
2. Flesh becomes Nougat
3. Medium Dark Flesh becomes Medium Nougat
4. Dark Flesh becomes Medium Brown
5. Dark Nougat is added to the BrickLink catalog, which is currently included
with BrickLink's Earth Orange.
Changes to the color names in Item Names are forthcoming. No changes to inventories
are necessary except to give Dark Nougat a place in the system.
How this may effect you:
1. If you rely on any of BrickLink's list pages that can be sorted by color
(set inventory, catalog search, catalog item detail page, etc.) some items may
be listed in a different order.
2. If you have your physical parts inventory sorted by color, you may need to
relabel. Dark Flesh is relatively rare, but if you have it, you will need to
change the labels to Medium Brown. That's the tough one, although renaming
it to a type of brown is a big step in the right direction.
3. If you perchance have the type of Earth Orange from the early 2000's,
you should separate out these parts and relist them under Dark Nougat. This color
is retired and quite rare.
Thanks to our BrickLink color enthusiasts for their input. They've given
invaluable advice over the years and we're happy they were willing to give
some advice this time around as well.
|
|
|
Author: | tpr | Posted: | Feb 2, 2020 04:35 | Subject: | Re: Nougat is the new Flesh | Viewed: | 36 times | Topic: | Colors | |
|
| In Colors, manganschlamm writes:
| In Colors, StarBrick writes:
| There is only 1 rational reason: Lego calls these colors Nougat.
So the transition to a tighter connection (assimilation?) to the Lego-Corp has
started I guess?
|
Could be, but then they renamed Medium Dark Flesh to Medium Dark Nougat, while
the official TLG color name of that one is Medium Nougat. So the outcome is more
fragmentation of color names.
|
Read the first in this thread. MDN now MN
tpr
|
|
Author: | tpr | Posted: | Dec 23, 2019 02:36 | Subject: | Torso's v Legs - assembled or not | Viewed: | 76 times | Topic: | Catalog | Status: | Open | |
|
| Hi
Reading various posts recently.
Why is it not possible to have all leg variants in the catalogue.
If you can have torso's, arms, hands as separate items why can it not be
done for hips and legs. (Lego only supply torso's complete with arms and
hands)
They do come apart, its not a problem easing them apart, no different than trying
to take arms out of torso's.
If I have a hips/legs combination with one leg marked or bitten, why can't
I just buy the leg I need?
Am I missing something?
tpr
|
|
Author: | tpr | Posted: | Jul 30, 2019 11:03 | Subject: | Re: Hair pulling - item for sale ......... | Viewed: | 46 times | Topic: | Catalog | |
|
| In Catalog, gogogovro writes:
| Just a thought... this might not bother you as much if you only concerned yourself
about what your own margin is on the sets you sell instead of going by the 6
mo. average... which (for sets) is never a good idea in my opinion.
I mean, perhaps the seller just parted out the minifig and forgot to change the
condition from new, sealed to new, incomplete. Does he deserve our wrath, no.
A friendly reminder by a fellow brick linker, yes.
It's easy to get self righteous about things like this... but people make
mistakes... I'm assuming this seller is a human not a robot and it is human
to err.
In Catalog, tpr writes:
| Hi
Ever bought a new set, SEALED, but with No Minifig
check out the cheapest new set for sale
|
|
Maybe
Once a mistake
Two possibly
A lot - definitely not a mistake
Check out his set listings
tpr
| |
Surely this has to stop
tpr
|
|
|
|
Author: | tpr | Posted: | Jul 30, 2019 10:13 | Subject: | Appoint a new administrator | Viewed: | 255 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi
I know a lot of work goes on behind the scenes with volunteer administrators
who do a damn good job with the catalogue and inventories.
Is it about time Bricklink appointed an (or more) administrator (s) to oversee
the selling side of Bricklink.
Bricklink would not exists without its revenue from sellers putting in time and
effort to sell and pay fees to Bricklink.
Surely it is only fair to sellers and buyers that items for sale conform to the
rules. If items are being mis-represented they should be removed or sellers given
the opportunity to amend their listing.
It would be nice if Bricklink appointed people to oversee the selling side of
the business. Sellers may then start conforming with their listings
tpr
|
|
Author: | tpr | Posted: | Jul 30, 2019 09:58 | Subject: | Hair pulling - item for sale ......... | Viewed: | 176 times | Topic: | Catalog | Status: | Open | |
|
| Hi
Ever bought a new set, SEALED, but with No Minifig
check out the cheapest new set for sale
Surely this has to stop
tpr
|
Author: | tpr | Posted: | Apr 8, 2019 10:06 | Subject: | Re: inconsistencies | Viewed: | 47 times | Topic: | Catalog | |
|
| In Catalog, edk writes:
| why is a plate modified when is a tile modified?
|
A plate by definition has studs
A tile by definition is flat, no studs.
Surely a modified plate should have more studs than flat area and vice versa
for tiles
A lot of these type of items are split between tiles and modified plates
tpr
|
|
Author: | tpr | Posted: | Mar 13, 2019 07:01 | Subject: | Re: Ninjago Minifigs in Other | Viewed: | 33 times | Topic: | Catalog | |
|
| In Catalog, Cob writes:
| Why are the Ninjago minifigures listed in Other?
Example
Within BrickStock they are listed in both Ninjago and in (Other).
The title on the minifig says "Minifigs: Ninjago: (Other)"
|
Hi
According to the entry above , its in Ninjago - subset "Other"
Presumably its in other as its not from an actual set - but just a minifig set
Tracy
|
|
Author: | tpr | Posted: | Jan 16, 2019 09:17 | Subject: | New buyers 0 feedback | Viewed: | 198 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi
It has been quite a while since I joined BrickLink, and for new members is there
any advice/info forwarded when joining (i.e ensure that you read the Sellers
Terms before Buying)
Just had a new member buy 1 part for 50p (UK), for delivery to Slovakia. Didn't
think he would buy once postage etc added.
Just had a message, thought it would be free postage.
Not a problem, as expecting it, but obviously he was not aware or made aware
of how Bricklink works.
Is such a thing in place or could it be added
Thanks
TPR
|
|
Author: | tpr | Posted: | Jan 13, 2019 04:02 | Subject: | Automated Feedback. | Viewed: | 159 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi all.
Suggestion ….
Feedback is not always left by the customer. Positive is left most times, and
a customer will always leave negative or neutral if there is something wrong.
One assumes that if nothing is heard from the customer, it must have been delivered
and was ok. Therefore - Can we have an automated positive feedback say after
2 months(or whatever length of time is felt suitable) of order being delivered
for all orders still showing as shipped. It could also be implemented if the
seller has not given feedback.
Thanks
Tracy
|
|
Author: | tpr | Posted: | Sep 24, 2018 06:17 | Subject: | Stopping/Checking inflated prices | Viewed: | 146 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi
Probably a lot of us have been guilty of this, adding an item to your inventory
and forgetting the decimal point, or putting it in the wrong place, thereby creating
an abnormal price.
Is it possible when entering a price for new or used, to flag if the price entered
is say more than xx% of the average prices already on file. Still giving you
the option to enter that price, but just warning that this price is abnormal
Thanks
Tracy
|
|
Author: | tpr | Posted: | Feb 1, 2012 03:44 | Subject: | Re: Shop Name - additional field | Viewed: | 48 times | Topic: | Suggestions | |
|
| In Suggestions, tpr writes:
| Hi Admin
Currently the shop set up has a main Name field which shows up in various places,
and a secondary field that only shows up in the shop.
Sellers have in the past, and still do add to their shop name when having a sale
or promotion.
Recently a shop did this and someone created a shop with their original name
as it wasn't taken (due to the member adding extra wording)
Would it be possible to have an extra field - that say you could put in up to
10 characters that could be added to the shop name to promote various sales without
the shop name changing
i.e.
In set up:-
Shop Name : THIS SHOP
Additional details : - SALE 40%
Combined shop name :- THIS SHOP - SALE 40%
Hope this makes sense
Susan
|
Hi
Nearly six months since this was suggested.
Any idea if it may be implemented
Thanks
Tracy
|
|
Author: | tpr | Posted: | Aug 10, 2011 15:20 | Subject: | Shop Name - additional field | Viewed: | 138 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Hi Admin
Currently the shop set up has a main Name field which shows up in various places,
and a secondary field that only shows up in the shop.
Sellers have in the past, and still do add to their shop name when having a sale
or promotion.
Recently a shop did this and someone created a shop with their original name
as it wasn't taken (due to the member adding extra wording)
Would it be possible to have an extra field - that say you could put in up to
10 characters that could be added to the shop name to promote various sales without
the shop name changing
i.e.
In set up:-
Shop Name : THIS SHOP
Additional details : - SALE 40%
Combined shop name :- THIS SHOP - SALE 40%
Hope this makes sense
Susan
|
|
Author: | tpr | Posted: | Apr 29, 2011 15:55 | Subject: | Re: Multiple stores, ONE ACCOUNT | Viewed: | 50 times | Topic: | Suggestions | |
|
| In Suggestions, maggiec writes:
| In Suggestions, BigBrickDaddy writes:
| In Suggestions, fosterbengoshi writes:
| In Suggestions, 7501 writes:
| I agree we have over 1 million parts in used inventory that we have been sitting
on for this very reason. I thought it was against the terms and conditions though?
|
It is because right now the only way to have a second store is to open a second
account. Duplicate accounts are forbidden by the BL ToS. The glaring loophole,
however, is that a member can have use the name of their spouse, sibling or friend
to open a new account and then manage that account just as if it were his own.
the second account is in name only, and I don't feel comfortable with that. I
think it will invite fictional users and much abuse. If your spouse is truly
running the store, OK. But if you are just using their name, I would say no.
Still, a second store under well-defined limited circustances might be a good
idea for some. Before jumping into this, however, we should clarify what those
limited circumstances might be and what additional rules, if any, should apply
to those second and third stores.
Thor
|
I agree.
Sounds like everyone is on the same page for once.
|
Not quite everyone. I like to know that if I am in someone's shop, this is it,
and I don't have to wonder whether there's something else in another shop of
theirs that I also want at the same time. I also don't like the possibility
that one seller might have more than one shop on the spotlighted / featured store
page. And plenty of people do fine selling both new and used items. What if
someone decides they want a shop strictly for gear, one for sets, one for new
parts, another for used parts... you get the picture. Why complicate things
for users (especially newer ones) as well as use up more of BL's resources unnecessarily?
I think it works fine the way it is.
Maggie
|
I agree
|
|
|