Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | SezaR  | | Posted: | May 7, 2021 19:11 | | Subject: | Re: Inventory Change Request for Set 1083-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 2 Part 6232 Red Brick, Modified 2 x 2 with Pin and Axle Hole
* Add 2 Part 4730 Red Brick, Modified 2 x 2 with Pin and No Axle Hole
|
|
|
| Author: | SezaR | | Posted: | May 7, 2021 19:10 | | Subject: | Inventory Change Request for Set 1083-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 6232 Red Brick, Modified 2 x 2 with Pin and Axle Hole
* Add 2 Part 4730 Red Brick, Modified 2 x 2 with Pin and No Axle Hole
|
 |
| Author: | smekel | | Posted: | May 7, 2021 19:00 | | Subject: | Re: Searching by color in Brickstore/Brickstock? | | Viewed: | 27 times | | Topic: | Inventories | |
| In Inventories, rslander writes:
| | Hi, apologies if this isn't the correct place to ask, but I was wanting to
create a list to mass upload parts to my inventory and was told about Brickstore
and Brickstock.
I was wanting to know if there was a way to search for a specific color of a
part. I've attached a picture as an example, I want to search for light
nougat female minifig heads. Is this possible in either of the applications?
If not is there a different piece of software I could use? Thank you!
|
I am not a Brickstore expert, but I don't see a way to do it there. However,
you might be able to do it here in the Bricklink site by filling in the form
here:
Looking for the keyword "female" in Item Type "Parts", Category "Minifigure,
Head", Colors "Light Nougat".
https://www.bricklink.com/catalogList.asp?pg=1&catXrefLevel=0&colorPart=90&catType=P&catID=238&v=1
|
|
| Author: | sjonni82 | | Posted: | May 7, 2021 18:04 | | Subject: | Inventory Change Request for Set 8051-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87080pb065 Black Technic, Panel Fairing # 1 Small Smooth Short, Side A with Black Number 88 Pattern (Sticker) - Set 8051 (Counterpart)
|
| Author: | sjonni82 | | Posted: | May 7, 2021 18:02 | | Subject: | Inventory Change Request for Set 76131-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 10202pb026 Dark Bluish Gray Tile 6 x 6 with Metallic Light Blue Avengers Logo Pattern (Sticker) - Set 76131 (Counterpart)
|
|
| Author: | WilliamRaine | | Posted: | May 7, 2021 17:34 | | Subject: | Inventory Change Request for Set 4195-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Minifig poc043 Queen Anne's Revenge Masthead
* Delete 2 Part 59230 White Arm Mechanical, Straight with Clips at 90 degrees (Vertical Grip)
* Delete 1 Part 93060 Trans-Orange Torso Skeleton, Angular Rib Cage, Plain
* Change {17 to 16} Part White 3626bpb0001 Minifigure, Head Skull Standard Pattern - Blocked Open Stud
* Change {17 to 16} Part White 3626cpb0001 Minifigure, Head Skull Standard Pattern - Hollow Stud (Alternate)
* Change {2 to 3} Part White 3626cpb0001 Minifigure, Head Skull Standard Pattern - Hollow Stud (Alternate)
* Change {6 to 4} Part White 30377 Arm Mechanical, Battle Droid
Comments from Submitter:
Changes to reflect the masthead as a figure entry
|
|
| Author: | rslander | | Posted: | May 7, 2021 15:18 | | Subject: | Searching by color in Brickstore/Brickstock? | | Viewed: | 56 times | | Topic: | Inventories | | Status: | Open | |
| Hi, apologies if this isn't the correct place to ask, but I was wanting to
create a list to mass upload parts to my inventory and was told about Brickstore
and Brickstock.
I was wanting to know if there was a way to search for a specific color of a
part. I've attached a picture as an example, I want to search for light
nougat female minifig heads. Is this possible in either of the applications?
If not is there a different piece of software I could use? Thank you!
|
|
|
| Author: | edeevo | | Posted: | May 7, 2021 14:29 | | Subject: | Re: What color is this? | | Viewed: | 50 times | | Topic: | Colors | |
| In Colors, Brock writes:
| | What color is this 1x12 technic brick? We got a couple from Legoland, but it
doesn't look like it's a color that has been produced in the last 10
years. My best guess is either dark blue-violet or blue-violet, but I don't
have any parts in those colors to verify. It looks like a darker version of dark
azure with just a little bit of green in it.
Thanks,
Brock
|
It's blue that was likely molded a long time ago; and as a result of that
era's mixed materials/colors, or simply discoloration from Sunlight exposure,
etc., they have changed hue over time... I have many of various shades of blue
from various older sets... the ones I have typically look brand new (shiny, no
scratches), they're just weird shades of blue...
Life is Good.
~Ed.
|
|
| Author: | axaday | | Posted: | May 7, 2021 12:13 | | Subject: | Re: What color is this? | | Viewed: | 55 times | | Topic: | Colors | |
| In Colors, Brock writes:
| | What color is this 1x12 technic brick? We got a couple from Legoland, but it
doesn't look like it's a color that has been produced in the last 10
years. My best guess is either dark blue-violet or blue-violet, but I don't
have any parts in those colors to verify. It looks like a darker version of dark
azure with just a little bit of green in it.
Thanks,
Brock
|
Brittle Blue
|
|
| Author: | tons_of_bricks | | Posted: | May 7, 2021 11:52 | | Subject: | Re: What color is this? | | Viewed: | 48 times | | Topic: | Colors | |
| In Colors, Brock writes:
| | What color is this 1x12 technic brick? We got a couple from Legoland, but it
doesn't look like it's a color that has been produced in the last 10
years. My best guess is either dark blue-violet or blue-violet, but I don't
have any parts in those colors to verify. It looks like a darker version of dark
azure with just a little bit of green in it.
Thanks,
Brock
|
Looks like brittle blue to me.
|
|
| Author: | Brock | | Posted: | May 7, 2021 11:48 | | Subject: | What color is this? | | Viewed: | 182 times | | Topic: | Colors | | Status: | Open | |
| What color is this 1x12 technic brick? We got a couple from Legoland, but it
doesn't look like it's a color that has been produced in the last 10
years. My best guess is either dark blue-violet or blue-violet, but I don't
have any parts in those colors to verify. It looks like a darker version of dark
azure with just a little bit of green in it.
Thanks,
Brock
|
|
|
| Author: | Roxyncz | | Posted: | May 7, 2021 07:24 | | Subject: | Inventory Change Request for Set 42112-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 24119pb013 White Technic, Panel Curved 7 x 3 with 2 Pin Holes through Panel Surface with Tank Filler Cap, Blue 'WATER' and Arrow Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 11947pb060 Dark Blue Technic, Panel Fairing #22 Very Small Smooth, Side A with Orange and White Stripe, Letter C and Arrows Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 11946pb060 Dark Blue Technic, Panel Fairing #21 Very Small Smooth, Side B with Orange and White Stripe, Letter C and Arrows Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 60484pb003 Black Technic, Liftarm, Modified T-Shape Thick 3 x 3 with Silver Letter V Shaped Logo on Dark Blue Background Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32524pb049 Light Bluish Gray Technic, Liftarm Thick 1 x 7 with Black and Orange Danger Stripes, Arrows and White 'STAY CLEAR' Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 24116pb020R Dark Blue Technic, Panel Curved 3 x 5 x 3 with Black Air Vent, Orange and White Stripes Pattern Model Right Side (Stickers) - Set 42112 (Counterpart)
* Add 1 Part 24116pb020L Dark Blue Technic, Panel Curved 3 x 5 x 3 with Black Air Vent, Orange and White Stripes Pattern Model Left Side (Stickers) - Set 42112 (Counterpart)
* Add 1 Part 32524pb050 Light Bluish Gray Technic, Liftarm Thick 1 x 7 with Yellow Letter N, Arrows and Concrete Mixer Truck Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32524pb051 Light Bluish Gray Technic, Liftarm Thick 1 x 7 with Yellow and Orange Arrows and Concrete Mixer Drum Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32523pb31R Light Bluish Gray Technic, Liftarm Thick 1 x 3 with Black and Orange Danger Stripes Pattern Model Right Side (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32523pb31R Blue Technic, Liftarm Thick 1 x 3 with Black and Orange Danger Stripes Pattern Model Right Side (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32523pb31L Light Bluish Gray Technic, Liftarm Thick 1 x 3 with Black and Orange Danger Stripes Pattern Model Left Side (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32523pb31L Blue Technic, Liftarm Thick 1 x 3 with Black and Orange Danger Stripes Pattern Model Left Side (Sticker) - Set 42112 (Counterpart)
* Add 2 Part 40490pb056 Blue Technic, Liftarm Thick 1 x 9 with Black and Silver Grille Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 32316pb059 Light Bluish Gray Technic, Liftarm Thick 1 x 5 with 'CM 42112' License Plate Pattern (Sticker) - Set 42112 (Counterpart)
* Add 1 Part 2431pb696 Light Bluish Gray Tile 1 x 4 with 'CM 42112' License Plate Pattern (Sticker) - Set 42112 (Counterpart)
|
|
| Author: | Turez | | Posted: | May 7, 2021 06:02 | | Subject: | Re: Inventory Change Request for Set 7245-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Atrobbus writes:
| | Please make changes to the following inventory:
* Add 2 Part BA164pb01 White Stickered Assembly 12 x 1 x 2 with White 'POLICE' On Black Background Pattern (Sticker) - Set 7245 - 1 Brick 1 x 12, 1 Brick 1 x 4, 2 Slope, Inverted 2 x 1 (Alternate)
Comments from Submitter:
Hey there, I hope I did this correctly. Basically I have the prisoner transport 7245 in the German (Green/POLIZEI) version and I noticed that there is no counterpart to the english version of BA164pb01 yet. All the other stickers are also listed in the German version, only this one was missing. Have a good one!
|
This request will not be approved since the part BA164pb01 is already included
in the inventory.
A new catalog entry is needed for the German sticker version (see further details
via mail).
|
|
| Author: | fritsp | | Posted: | May 7, 2021 05:59 | | Subject: | Re: Inventory Change Request for Set 7245-1 | | Viewed: | 16 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Atrobbus writes:
| | | | Comments from Submitter:
Hey there, I hope I did this correctly.
|
|
Almost! 
First add the "sticker over assembly" as a part, probably called 'BA164pb03'
Then add the image to that part (nice image!)
Then add the newly added part to the set as a "counterpart"
|
| Author: | Turez | | Posted: | May 7, 2021 05:45 | | Subject: | Re: Inventory Change Request for Set 42099-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, xoshimin writes:
| | Please make changes to the following inventory:
* Add 2 Part 61408 Black Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes and Squared Pin Hole (Alternate) (match ID 1)
* Change 2 Part Black 33299 Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes {Regular to Alternate} {match ID 0 to 1}
|
I assume the source for these requests is a sealed set?
|
|
| Author: | Atrobbus | | Posted: | May 7, 2021 05:05 | | Subject: | Re: Inventory Change Request for Set 7245-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Atrobbus writes:
| | Please make changes to the following inventory:
* Add 2 Part BA164pb01 White Stickered Assembly 12 x 1 x 2 with White 'POLICE' On Black Background Pattern (Sticker) - Set 7245 - 1 Brick 1 x 12, 1 Brick 1 x 4, 2 Slope, Inverted 2 x 1 (Alternate)
Comments from Submitter:
Hey there, I hope I did this correctly. Basically I have the prisoner transport 7245 in the German (Green/POLIZEI) version and I noticed that there is no counterpart to the english version of BA164pb01 yet. All the other stickers are also listed in the German version, only this one was missing. Have a good one!
|
The image of course:
|
|
|
| Author: | Atrobbus | | Posted: | May 7, 2021 05:03 | | Subject: | Inventory Change Request for Set 7245-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part BA164pb01 White Stickered Assembly 12 x 1 x 2 with White 'POLICE' On Black Background Pattern (Sticker) - Set 7245 - 1 Brick 1 x 12, 1 Brick 1 x 4, 2 Slope, Inverted 2 x 1 (Alternate)
Comments from Submitter:
Hey there, I hope I did this correctly. Basically I have the prisoner transport 7245 in the German (Green/POLIZEI) version and I noticed that there is no counterpart to the english version of BA164pb01 yet. All the other stickers are also listed in the German version, only this one was missing. Have a good one!
|
|
| Author: | xoshimin | | Posted: | May 7, 2021 04:37 | | Subject: | Inventory Change Request for Set 42107-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61408 Light Bluish Gray Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes and Squared Pin Hole (Alternate) (match ID 1)
* Change 1 Part Light Bluish Gray 33299 Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes {Regular to Alternate} {match ID 0 to 1}
|
|
| Author: | xoshimin | | Posted: | May 7, 2021 04:33 | | Subject: | Inventory Change Request for Set 42099-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 61408 Black Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes and Squared Pin Hole (Alternate) (match ID 1)
* Change 2 Part Black 33299 Technic, Liftarm, Modified Crank / Pin 1 x 3 - Axle Holes {Regular to Alternate} {match ID 0 to 1}
|
|
| Author: | AshleyJames | | Posted: | May 6, 2021 23:51 | | Subject: | Inventory Change Request for Set 41185-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2335pb231 Black Flag 2 x 2 Square with Crossed Hammer and Axe Pattern (Sticker) - Set 41185 (Counterpart)
* Add 1 Part 22886pb09 Light Bluish Gray Brick 1 x 2 x 3 with Books, Keys and Potion Flask Pattern (Sticker) - Set 41185 (Counterpart)
* Add 1 Part 2335pb232 Black Flag 2 x 2 Square with Rock Crystal and Sparkles Pattern (Sticker) - Set 41185 (Counterpart)
* Add 2 Part 3245cpb168 Black Brick 1 x 2 x 2 with Inside Stud Holder with Gold Goblin King Eye Pattern (Sticker) - Set 41185 (Counterpart)
* Add 1 Part 3068bpb1666 White Tile 2 x 2 with Groove with Newspaper with Goblin Holding Diamond Pattern (Sticker) - Set 41185 (Counterpart)
* Add 1 Part 3068bpb1667 White Tile 2 x 2 with Groove with Engineering Design, Arrows and Number 4 and 5 Pattern (Sticker) - Set 41185 (Counterpart)
Comments from Submitter:
41185stk01 (Set 41185)
|
|
| Author: | 1977_mauro | | Posted: | May 6, 2021 22:53 | | Subject: | Inventory Change Request for Set 6464-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Minifig soc045 Police - Sheriff Star and 2 Pockets, Black Legs, White Arms, Black Cap, Black Sunglasses
* Add 1 Minifig cop057 Police - Sheriff Star and 2 Pockets, Light Gray Legs, White Arms, Black Cap, Black Sunglasses
Comments from Submitter:
This is the follow-on of the wrong inventorized minifig, see:
https://www.bricklink.com/messageThread.asp?ID=289287
|
|
| Author: | normann1974 | | Posted: | May 6, 2021 19:32 | | Subject: | Inventory Change Request for Set 700.H-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part bslot16R Red Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, right side) (Alternate) (match ID 1)
* Add 1 Part bslot16R Blue Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, right side) (Alternate) (match ID 1)
* Add 1 Part bslot16R Green Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, right side) (Alternate) (match ID 1)
* Add 1 Part bslot16R Yellow Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, right side) (Alternate) (match ID 1)
* Add 1 Part bslot16R White Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, right side) (Alternate) (match ID 1)
* Change 1 Part Red {bslot16 Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, undetermined slot side) to bslot16L Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, left side)} {match ID 0 to 1}
* Change 1 Part Blue {bslot16 Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, undetermined slot side) to bslot16L Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, left side)} (Alternate) {match ID 0 to 1}
* Change 1 Part Green {bslot16 Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, undetermined slot side) to bslot16L Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, left side)} (Alternate) {match ID 0 to 1}
* Change 1 Part White {bslot16 Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, undetermined slot side) to bslot16L Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, left side)} (Alternate) {match ID 0 to 1}
* Change 1 Part Yellow {bslot16 Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, undetermined slot side) to bslot16L Brick 4 x 4 Corner without Bottom Tubes, Slotted (with 1 slot, left side)} (Alternate) {match ID 0 to 1}
Comments from Submitter:
As discussed with admin per e-mail.
|
|
| Author: | bricks2smiles | | Posted: | May 6, 2021 16:36 | | Subject: | Inventory Change Request for Set 41345-1 | | Viewed: | 38 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3004pb170 Medium Lavender Brick 1 x 2 with Paw Print, Rabbit and Food Bowl Pattern (Sticker) - Set 41345 (Counterpart)
* Add 1 Part 3245cpb169 Bright Light Orange Brick 1 x 2 x 2 with Inside Stud Holder with Paw Print, Dog and Food Bowl Pattern (Sticker) - Set 41345 (Counterpart)
* Add 1 Part 2454pb187 White Brick 1 x 2 x 5 with White Hanging Coat, Stethoscope and Bottles on Shelf Pattern (Sticker) - Set 41345 (Counterpart)
* Add 2 Part 87552pb073 White Panel 1 x 2 x 2 with Side Supports - Hollow Studs with White Paw Print in Dark Pink Circle Pattern (Sticker) - Set 41345 (Counterpart)
* Add 1 Part 60581pb177 White Panel 1 x 6 x 5 with Hanging Leash, Pet Supplies on Shelves, 'Emma' and 'LOST' Posters Pattern on Inside (Sticker) - Set 41345 (Counterpart)
|
|
| Author: | samsam2 | | Posted: | May 6, 2021 15:07 | | Subject: | Re: 6950 piece count on box | | Viewed: | 31 times | | Topic: | Inventories | |
| In Inventories, peregrinator writes:
Samsonite Canada was still producing parts, packaging sets and selling Lego well
into the 1980's. I have family who worked there into the 80's. The boxes
say right on them, made in Canada when entirely made in Canada. The proportion
of "Made in Canada" sets decreased, and it became, "Packaged by Samsonite" and
also "Imported by Samsonite"
|
|
|
| Author: | Turez | | Posted: | May 6, 2021 14:26 | | Subject: | Re: Inventory Change Request for Set 5004468-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, stephannie writes:
| | I agree with my predecessors. Set 5004468 does NOT contain COL135. It contains
another minifigure, different from the COL135, composed of a head with hollow
stud, which we must create to put an end to the confusion (I propose a name starting
with HOL ...). The subject seems important to me, because the COL135 was valuable,
and its value has dropped due to the release in 2016 of an NON-IDENTICAL minifigure
included in the set 5004468. Some may judge the difference insignificant, it
is not for me. When I buy a minifigure, I hope it to meet my expectations. Some
may judge the difference insignificant, it is not for me. When I buy a minifigure,
I expect it to meet my expectations. A simple note "This minifigure has also
been found with the 'c' style head" is, in my opinion, insufficient,
because the difference is for me clearly established between the two minifigures.
|
I have added
as an alternate part since this is the way how heads variants (blocked open stud/hollow
stud) are currently handled.
|
|
| Author: | MrPetovan | | Posted: | May 6, 2021 13:45 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 53 times | | Topic: | Catalog | |
| Thank you for your good spirit!
In Catalog, randyf writes:
| | To both of you, thanks! And of course I do not hold grudges against either of
you. We may have differing opinions on policies and routes of action from time
to time, but that is all part of the job. Having more people interested in what
happens with the catalog/inventories is a good thing! 
|
|
| Author: | jennnifer | | Posted: | May 6, 2021 13:23 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 44 times | | Topic: | Catalog | |
| Congrats to randyf! Good luck in your new position for which you are so well-qualified!
I am glad you are watching over our catalog.
Jen
|
| Author: | randyf | | Posted: | May 6, 2021 13:19 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 53 times | | Topic: | Catalog | |
| In Catalog, infinibrix writes:
| | In Catalog, MrPetovan writes:
| | Congratulations Randy, I know we haven't always seen each other eye to eye,
but I'm not holding any grudge, and I hope you won't either!
|
+1
Just Kidding  Congrats Randy!
|
To both of you, thanks! And of course I do not hold grudges against either of
you. We may have differing opinions on policies and routes of action from time
to time, but that is all part of the job. Having more people interested in what
happens with the catalog/inventories is a good thing!
|
|
| Author: | 1977_mauro | | Posted: | May 6, 2021 12:49 | | Subject: | Re: Inventory Change Request for Set 6464-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| I have requested the new minifig here:
https://www.bricklink.com/catalogList.asp?myPend=Y
I was not able to add the picture but this can be done only at a later point
of time as I remember...
In Inventories Requests, Turez writes:
| | In Inventories Requests, 1977_mauro writes:
| | Thanks for changing it! I have not checked if there were other additional parts
but focused more on the differences I have noted.
What can we do with the other two things?
https://www.bricklink.com/message.asp?ID=1269362
The assembled part is not a big deal but the wrong inventorized minifig is...
|
Well, the new minifigure and the assembly need to be added to the catalog:
https://www.bricklink.com/catalogAdd.asp
Please let us know if you have any questions (but have a bit patience, the Admin
team has just been reorganized).
| |
I wanted also update the number of booklets to 11 for the 6464 instruction but
have not find the place to do that?
|
Link above - Change Item: Set
(BTW. you can also add or change other things there like weight or dimensions
of a set, box, etc.)
However the current maximum number of instructions which can be entered is 9
so I would suggest to do nothing here until the system allows larger numbers.
|
|
|
| Author: | BricksThatStick | | Posted: | May 6, 2021 12:43 | | Subject: | Re: Inventory Change Request for Set 6464-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Stellar writes:
| | In Inventories Requests, Turez writes:
| | In Inventories Requests, 1977_mauro writes:
| | Thanks for changing it! I have not checked if there were other additional parts
but focused more on the differences I have noted.
What can we do with the other two things?
https://www.bricklink.com/message.asp?ID=1269362
The assembled part is not a big deal but the wrong inventorized minifig is...
|
Well, the new minifigure and the assembly need to be added to the catalog:
https://www.bricklink.com/catalogAdd.asp
Please let us know if you have any questions (but have a bit patience, the Admin
team has just been reorganized).
| |
I wanted also update the number of booklets to 11 for the 6464 instruction but
have not find the place to do that?
|
Link above - Change Item: Set
(BTW. you can also add or change other things there like weight or dimensions
of a set, box, etc.)
However the current maximum number of instructions which can be entered is 9
so I would suggest to do nothing here until the system allows larger numbers.
|
Maybe there is a way.
https://www.bricklink.com/catalogReqList.asp?viewStatus=0&itemType=S
|
Thanks. We can always do it manually if necessary.
|
|
| Author: | Stellar | | Posted: | May 6, 2021 12:38 | | Subject: | Re: Inventory Change Request for Set 6464-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
| | In Inventories Requests, 1977_mauro writes:
| | Thanks for changing it! I have not checked if there were other additional parts
but focused more on the differences I have noted.
What can we do with the other two things?
https://www.bricklink.com/message.asp?ID=1269362
The assembled part is not a big deal but the wrong inventorized minifig is...
|
Well, the new minifigure and the assembly need to be added to the catalog:
https://www.bricklink.com/catalogAdd.asp
Please let us know if you have any questions (but have a bit patience, the Admin
team has just been reorganized).
| |
I wanted also update the number of booklets to 11 for the 6464 instruction but
have not find the place to do that?
|
Link above - Change Item: Set
(BTW. you can also add or change other things there like weight or dimensions
of a set, box, etc.)
However the current maximum number of instructions which can be entered is 9
so I would suggest to do nothing here until the system allows larger numbers.
|
Maybe there is a way.
https://www.bricklink.com/catalogReqList.asp?viewStatus=0&itemType=S
|
|
| Author: | Turez | | Posted: | May 6, 2021 12:24 | | Subject: | Re: Inventory Change Request for Set 6464-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
| In Inventories Requests, 1977_mauro writes:
| | Thanks for changing it! I have not checked if there were other additional parts
but focused more on the differences I have noted.
What can we do with the other two things?
https://www.bricklink.com/message.asp?ID=1269362
The assembled part is not a big deal but the wrong inventorized minifig is...
|
Well, the new minifigure and the assembly need to be added to the catalog:
https://www.bricklink.com/catalogAdd.asp
Please let us know if you have any questions (but have a bit patience, the Admin
team has just been reorganized).
| |
I wanted also update the number of booklets to 11 for the 6464 instruction but
have not find the place to do that?
|
Link above - Change Item: Set
(BTW. you can also add or change other things there like weight or dimensions
of a set, box, etc.)
However the current maximum number of instructions which can be entered is 9
so I would suggest to do nothing here until the system allows larger numbers.
|
|
| Author: | 1977_mauro | | Posted: | May 6, 2021 11:51 | | Subject: | Re: Inventory Change Request for Set 6464-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| Picture of the correct minifig from set 6464:
In Inventories Requests, 1977_mauro writes:
| | Regarding the assembled part, in the addition to the two mentioned parts another
one is a part of this assembly as well:
This means that all 3 parts came asembled.
In Inventories Requests, 1977_mauro writes:
| | Thanks for changing it! I have not checked if there were other additional parts
but focused more on the differences I have noted.
What can we do with the other two things?
https://www.bricklink.com/message.asp?ID=1269362
The assembled part is not a big deal but the wrong inventorized minifig is...
I wanted also update the number of booklets to 11 for the 6464 instruction but
have not find the place to do that?
Thanks Mauro
In Inventories Requests, Turez writes:
|
|
|
|
|
| Author: | 1977_mauro | | Posted: | May 6, 2021 11:46 | | Subject: | Re: Inventory Change Request for Set 6464-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
| Regarding the assembled part, in the addition to the two mentioned parts another
one is a part of this assembly as well:
This means that all 3 parts came asembled.
In Inventories Requests, 1977_mauro writes:
| | Thanks for changing it! I have not checked if there were other additional parts
but focused more on the differences I have noted.
What can we do with the other two things?
https://www.bricklink.com/message.asp?ID=1269362
The assembled part is not a big deal but the wrong inventorized minifig is...
I wanted also update the number of booklets to 11 for the 6464 instruction but
have not find the place to do that?
Thanks Mauro
In Inventories Requests, Turez writes:
|
|
|
| Author: | leggodtshop | | Posted: | May 6, 2021 11:30 | | Subject: | Re: baseplate 16 x 21 | | Viewed: | 61 times | | Topic: | Catalog | |
| In Catalog, 1974 writes:
| | In Catalog, patpendlego writes:
| | It is not a 16x22 plate, and no way you can prove it to be a misprint of it.
|
Misprint? There is not thing printed on it
|
LOL you're right of course, I couldn't come up with the right word...
| |
It's a misCUT. Baseplaets are vacuum formed in large sheets and then cut
to size. It's not even TLG who makes these, it's an outside company allthough
I'm not sure if they cut them too?
It's not the first time a non-standard baseplate have turned up
Cheers,
Ole
|
|
|
| Author: | 1977_mauro | | Posted: | May 6, 2021 11:28 | | Subject: | Re: Inventory Change Request for Set 6464-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
| Thanks for changing it! I have not checked if there were other additional parts
but focused more on the differences I have noted.
What can we do with the other two things?
https://www.bricklink.com/message.asp?ID=1269362
The assembled part is not a big deal but the wrong inventorized minifig is...
I wanted also update the number of booklets to 11 for the 6464 instruction but
have not find the place to do that?
Thanks Mauro
In Inventories Requests, Turez writes:
|
|
| Author: | Turez | | Posted: | May 6, 2021 11:17 | | Subject: | Re: Inventory Change Request for Set 6464-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
| In Inventories Requests, 1977_mauro writes:
| | Please make changes to the following inventory:
* Delete 1 Part 2447 Trans-Light Blue Minifigure, Visor Standard
* Add 4 Part 2447 Trans-Dark Blue Minifigure, Visor Standard (Extra)
Comments from Submitter:
There is no trans-light blue visor but only dark-blue visors, 1 in the minifig, 1 in the set, 4 are extra parts.
|
There should be three regular parts, so three are extras. See
http://www.peeron.com/scans/6464-1/1/?id=2922
http://www.peeron.com/scans/6464-1/6/?id=2922
http://www.peeron.com/scans/6464-1/12/?id=2922
I have adjusted the quantities.
I would assume there were also some other extra parts in your set?
|
|
| Author: | 1977_mauro | | Posted: | May 6, 2021 11:12 | | Subject: | Inventory Change Request for Set 6456-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 3 Part 6048b Black Arm Piece with Pin, 2 Fingers and Finger Grooves (Alternate) (match ID 1)
* Change 3 Part Black 6048 Arm Piece with Pin, 2 Fingers {match ID 0 to 1}
Comments from Submitter:
From a sealed set.
|
|
| Author: | 1974 | | Posted: | May 6, 2021 09:13 | | Subject: | Re: baseplate 16 x 21 | | Viewed: | 53 times | | Topic: | Catalog | |
| In Catalog, patpendlego writes:
| | It is not a 16x22 plate, and no way you can prove it to be a misprint of it.
|
Misprint? There is not thing printed on it
It's a misCUT. Baseplaets are vacuum formed in large sheets and then cut
to size. It's not even TLG who makes these, it's an outside company allthough
I'm not sure if they cut them too?
It's not the first time a non-standard baseplate have turned up
Cheers,
Ole
|
| Author: | InsanityBeckonz | | Posted: | May 6, 2021 08:20 | | Subject: | Inventory Change Request for Set 60200-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 14769pb009 Red Tile, Round 2 x 2 with Bottom Stud Holder with White Curved Arrow Double on Red Background Pattern (Sticker) - Sets 60052 / 60198 / 60233
|
|
| Author: | axaday | | Posted: | May 6, 2021 08:09 | | Subject: | Inventory Change Request for Set 80024-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2431pb695 Metallic Gold Tile 1 x 4 with Chinese Logogram Stamp Script '雲遊來仙道' (Travel by Cloud on Immortal Road) (Sticker) - Set 80024 (Counterpart)
* Add 1 Part 2431pb697 Metallic Gold Tile 1 x 4 with Chinese Logogram Stamp Script '勇闖水簾洞' (Brave Rush to Water Curtain Cave) (Sticker) - Set 80024 (Counterpart)
* Add 1 Part 2431pb698 Metallic Gold Tile 1 x 4 with Chinese Logogram Stamp Script '仙石化靈猴' (Immortal Rock Transforms Spirit Monkey) (Sticker) - Set 80024 (Counterpart)
* Add 1 Part 2431pb699 Metallic Gold Tile 1 x 4 with Chinese Logogram Stamp Script '覓得金箍棒' (Find Monkey King's Staff) (Sticker) - Set 80024 (Counterpart)
* Add 1 Part 2431pb700 Metallic Gold Tile 1 x 4 with Chinese Logogram Stamp Script '嬉游花果山' (Fun Journey to Flower Fruit Mountain) (Sticker) - Set 80024 (Counterpart)
* Add 1 Part 2431pb701 Metallic Gold Tile 1 x 4 with Chinese Logogram Stamp Script '真假美猴王' (True or False Beautiful Monkey King) (Sticker) - Set 80024 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | May 6, 2021 07:51 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 83 times | | Topic: | Catalog | |
| | Congratulation Randy and wish you all the best. |
| Author: | infinibrix | | Posted: | May 6, 2021 07:50 | | Subject: | Re: We have a new Catalog Associate! | | Viewed: | 64 times | | Topic: | Catalog | |
| In Catalog, MrPetovan writes:
| | Congratulations Randy, I know we haven't always seen each other eye to eye,
but I'm not holding any grudge, and I hope you won't either!
|
+1
Just Kidding Congrats Randy!
|
| Author: | tec | | Posted: | May 6, 2021 07:37 | | Subject: | Re: baseplate 16 x 21 | | Viewed: | 59 times | | Topic: | Catalog | |
| Before venturing in selling it, first thing to do is a deep inspection with magnifier/microscope/light
etc
If it happens that the part ID is for 16x16 baseplate, it would be a complete
different case, don't you think?
Better yet, what if it's an unknown ID?
| | Can I sell this item on Bricklink?
|
|
| Author: | 1977_mauro | | Posted: | May 6, 2021 07:29 | | Subject: | Inventory Change Request for Set 6464-1 | | Viewed: | 37 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 2447 Trans-Light Blue Minifigure, Visor Standard
* Add 4 Part 2447 Trans-Dark Blue Minifigure, Visor Standard (Extra)
Comments from Submitter:
There is no trans-light blue visor but only dark-blue visors, 1 in the minifig, 1 in the set, 4 are extra parts.
|
|
| Author: | yorbrick | | Posted: | May 6, 2021 07:07 | | Subject: | Re: baseplate 16 x 21 | | Viewed: | 51 times | | Topic: | Catalog | |
| Yeah. Listing as a custom item probably is best here, so the customer really
knows what size they are getting. Baseplates can be manually cut and finished
to look quite professional even if the cut is not exactly the same as when done
officially. Proving it was genuinely made/supplied like that may be difficult.
|
|
| Author: | 1977_mauro | | Posted: | May 6, 2021 07:05 | | Subject: | Inventory Change Request for Set 6464-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part x39c01 Black Door 1 x 4 x 6 with 3 Panes with Trans-Light Blue Glass
* Delete 1 Part 30179 Red Door, Frame 1 x 4 x 6 with Four Holes on Top and Bottom
* Delete 1 Part 4208 Black String Reel 2 x 4 x 2 Drum
* Delete 1 Part 194cx2 Light Gray Minifigure, Utensil Hose Nozzle Simple with 35L Black String
* Add 1 Part 4208c01 Black String Reel 2 x 4 x 2 Drum with Light Gray Minifigure, Utensil Hose Nozzle Simple with 35L Black String (4208 / 194cx2)
* Change 6 Part White {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
* Change 1 Part Red 30179c03 Door, Frame 1 x 4 x 6 with Four Holes on Top and Bottom with Black Door 1 x 4 x 6 with 3 Panes with Trans-Light Blue Glass (30179 / x39c01) {Counterpart to Regular}
Comments from Submitter:
From a selaed set. Several parts came already assembled!
|
|
| Author: | leggodtshop | | Posted: | May 6, 2021 06:43 | | Subject: | Re: baseplate 16 x 21 | | Viewed: | 57 times | | Topic: | Catalog | |
| In Catalog, tonnic writes:
| | In Catalog, brik_en_tik writes:
| | In Catalog, tonnic writes:
| | In Catalog, brik_en_tik writes:
| | I have a LEGO green baseplate with 16 x 21 studs, which does not seem to exist
on Bricklink (one size smaller is 16 x 18 and one bigger is 16 x 22). It is a
genuine LEGO baseplate, which is not cut, not broken or damaged whatsoever so
I'm wondering to which set this baseplate might belong. I suspect something
from Fabuland 3664 since I have other bricks from this set, but I'm not sure.
Can someone help me out? Picture is uploaded.
|
These were cut in the factory.
I do not know if it was done by an employee with a ‘cuttingmachine’ but maybe
it was miscalculated.
So a really nice survivor.
|
Can I sell this item on Bricklink?
|
If it most likely was cut by Lego I think you can but let others correct me if
I am wrong.
A lot of these older baseplates have a more white stressmark on the thin side
from the cut made in the Lego factory.
They were cut into shape from a very large plate.
So if you sell it make sure the size is very visible in your description to make
sure a potential buyer can read it and after selling make sure they really DID
read it since you can only put it on Bricklink like:
1) a custom item (not found easily)
|
This is the only option.
| | 2) at the entry of baseplate 16x22 studs, buyers can find it there but you need
tombe sure they know they are buying the 16x21 studs.
|
It is not a 16x22 plate, and no way you can prove it to be a misprint of it.
| |
Pricewise? I wouldn’t know, maybe a few €’s more than the standard baseplate
or you can ask in this forum for a very interested member and reserve it for
a price you agreed on.
|
|
|
| Author: | Roxyncz | | Posted: | May 6, 2021 06:35 | | Subject: | Inventory Change Request for Set 10265-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2431pb692 White Tile 1 x 4 with 'K AM58IH' License Plate Pattern (Sticker) - Set 10265 (Counterpart)
|
|
| Author: | tonnic | | Posted: | May 6, 2021 06:05 | | Subject: | Re: baseplate 16 x 21 | | Viewed: | 58 times | | Topic: | Catalog | |
| In Catalog, brik_en_tik writes:
| | In Catalog, tonnic writes:
| | In Catalog, brik_en_tik writes:
| | I have a LEGO green baseplate with 16 x 21 studs, which does not seem to exist
on Bricklink (one size smaller is 16 x 18 and one bigger is 16 x 22). It is a
genuine LEGO baseplate, which is not cut, not broken or damaged whatsoever so
I'm wondering to which set this baseplate might belong. I suspect something
from Fabuland 3664 since I have other bricks from this set, but I'm not sure.
Can someone help me out? Picture is uploaded.
|
These were cut in the factory.
I do not know if it was done by an employee with a ‘cuttingmachine’ but maybe
it was miscalculated.
So a really nice survivor.
|
Can I sell this item on Bricklink?
|
If it most likely was cut by Lego I think you can but let others correct me if
I am wrong.
A lot of these older baseplates have a more white stressmark on the thin side
from the cut made in the Lego factory.
They were cut into shape from a very large plate.
So if you sell it make sure the size is very visible in your description to make
sure a potential buyer can read it and after selling make sure they really DID
read it since you can only put it on Bricklink like:
1) a custom item (not found easily)
2) at the entry of baseplate 16x22 studs, buyers can find it there but you need
tombe sure they know they are buying the 16x21 studs.
Pricewise? I wouldn’t know, maybe a few €’s more than the standard baseplate
or you can ask in this forum for a very interested member and reserve it for
a price you agreed on.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
