Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | brik_en_tik  | | Posted: | May 6, 2021 04:13 | | Subject: | baseplate 16 x 21 | | Viewed: | 129 times | | Topic: | Catalog | | Status: | Open | |
| I have a LEGO green baseplate with 16 x 21 studs, which does not seem to exist
on Bricklink (one size smaller is 16 x 18 and one bigger is 16 x 22). It is a
genuine LEGO baseplate, which is not cut, not broken or damaged whatsoever so
I'm wondering to which set this baseplate might belong. I suspect something
from Fabuland 3664 since I have other bricks from this set, but I'm not sure.
Can someone help me out? Picture is uploaded.
|
|
 |
| Author: | Admin_Russell | | Posted: | May 5, 2021 18:32 | | Subject: | We have a new Catalog Associate! | | Viewed: | 220 times | | Topic: | Catalog | | Status: | Open | |
| Greetings BrickLink catalog enthusiasts!
You will be pleased to learn that we have just today appointed a new Catalog
Associate - Randyf. Randy has served as an Inventories Administrator for the
last couple years and has done a fantastic job. We feel this promotion, though
it has been long in coming, is very well deserved.
As a reminder to those who are still learning about the BrickLink Community Expert
Program, the Catalog Associate position gives admin privileges over the entire
catalog half of our BrickLink system. After one year's experience, Catalog
Associates are eligible for promotion to full Catalog Admin, which gives them
full privileges on both sides, for both catalog and inventories.
https://www.bricklink.com/memberAdmins.asp
We plan to update the Hall of Fame page very soon. There are several things to
add, including Randy's time serving as Inventory Admin.
Please welcome our new associate! 
|
|
| Author: | timtoon | | Posted: | May 3, 2021 20:28 | | Subject: | New part color getting rejected? | | Viewed: | 123 times | | Topic: | Catalog | | Status: | Open | |
| I'm trying to submit dark orange for part 25412, but the image just gets
deleted and I don't know what I'm doing wrong.
|
|
| Author: | cosmicray | | Posted: | May 3, 2021 11:13 | | Subject: | Catalog page Packing Dimensions Add button | | Viewed: | 61 times | | Topic: | Catalog | | Status: | Open | |
| When viewing a Catalog page, and I see packing dimensions missing (i.e. with
a question mark) it would be so handy if there were an Add button right there,
that takes me to the correct page, with all the parameters preloaded, and all
I have to do is enter the correct numbers. That would enable, and encourage,
many missing PDs to be added.
Nita Rae
|
|
| Author: | normann1974 | | Posted: | May 2, 2021 17:51 | | Subject: | Promotional set "Kamille" | | Viewed: | 173 times | | Topic: | Catalog | | Status: | Open | |
| A friend of mine has informed me of a promotional set "Kamille" given out to
children at one or more LEGO events by the Danish supermarket "Bilka". Kamille
is one of the supermarket's mascots. The set came in a LEGO zip-lock bag,
and it's unknown whether or not it came with instructions in the bag, it
may have been available only to the event hosts. A PDF version of the instructions
have been made available by Bilka on request.
Please see attached images.
Is this a set that is allowed to be put on BL?
/Jan
|
|
| Author: | Leftoverbricks | | Posted: | May 2, 2021 04:59 | | Subject: | Pending approval: mineravager01 | | Viewed: | 88 times | | Topic: | Catalog | | Status: | Open | |
| | Can I help the inventory/catalog admin with this part? |
| Author: | cosmicray | | Posted: | Apr 30, 2021 17:12 | | Subject: | Lego Socks | | Viewed: | 174 times | | Topic: | Catalog | | Status: | Open | |
| Early this morning, out doing some shopping, and spied this LEGO endcap at WalMart.
On the side was a dino and images of LEGO socks. They were not in the endcap,
nor on the LEGO aisle. Has anyone seen these in stores ? Youth or Adult sizes
? I don't see these in the Catalog.
Nita Rae
|
|
| Author: | crepundi | | Posted: | Apr 30, 2021 05:20 | | Subject: | image of part 3192a | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
| Please correct the image of door 1 x 3 x 3 right in colour blue. It
is showing the door 1 x 3 x 4
Regards,
Gisela
|
|
| Author: | _djm | | Posted: | Apr 29, 2021 18:38 | | Subject: | Looking for set image from Dacta (?) catalog | | Viewed: | 63 times | | Topic: | Catalog | | Status: | Open | |
| I'm hoping someone with Dacta catalogs from the mid(?) 1990's (perhaps
1993 - 1997) can help.
I recently acquired a somewhat obscure Control Lab set:
which I am in the process of creating the catalog inventory for. There don't
appear to be any references to this set of most of the other standard sites (e,g,
brickset, peeron) and the only image I could find of this set was at http://www.miniland.nl/Dacta/sets/2001187.htm.
The set in question is the set in the yellow case at the rear of the photo.
Via the wayback machine, I've had a trawl through LEGO's various sites
and have had no joy in finding any image for this set. Based on what I have found,
my presumption is that this set would have been listed in a Dacta catalog from
sometime in the mid-1990s - it may be that this set only was for sale in the
UK/Europe, although that is speculation on my behalf.
I was wondering whether anybody with Dacta catalogs from the mid-1990's would
be willing to take a look through their catalogs to see if they can find an image
for the set. My photo skills are "lacking" and if an image for the set is available
in a catalog, it will likely be better than any photo I add. If you do find an
image for the set, would you please submit it as the image for this set. I'd
also appreciate it if you would send me a copy of the image too please, as I
would like to be able to add this set to rebrickable.com.
Thank you and regards,
David
|
|
| Author: | Erikmax | | Posted: | Apr 29, 2021 04:50 | | Subject: | Original or coming from Ali? | | Viewed: | 206 times | | Topic: | Catalog | | Status: | Open | |
| I recently bought YELLOW axles 50450 from a dealer on Bricklink offering them
in quantities at a reasonable price.
After arriving I noticed these axles being a bit lighter of colour. Because the
are more colour varieties I wasn't alarmed directly.
But when I looked a bit closer to the axles I also noticed the 'cross'
on the edge of the axle was a bit less sharp. I think normally there is a dimple
at one of the ends- these axes don't have one.
The combination of a quantity offer of this part, the colour difference and the
slightly rougher shape raises some questions.
If it is original: Perfect. If it isn't: How could we stop this? I guess
99% of the customers won't notice.
Or is it simply the end of the premium prices for this sort of parts??
Or place a warning with a clear description of the original?
|
|
| Author: | Admin_Russell | | Posted: | Apr 27, 2021 21:27 | | Subject: | We have a new Inventories Administrator! | | Viewed: | 289 times | | Topic: | Catalog | | Status: | Open | |
| Dear BrickLink members,
We have appointed to the Community Expert Program one new member today! His username
is Turez and he will be assuming the role of Inventories Administrator. As with
all other admins in this area, he will be eligible to move up through the ranks
after a period of time:
https://www.bricklink.com/feedback.asp?u=Turez
https://www.bricklink.com/memberAdmins.asp
Turez comes to us as a well-known and trusted catalog contributor who has a sharp
understanding of LEGO history and catalog related issues. He has contributed
extensively, and his contributions are of a very high quality. You can see some
of his part images here:
https://www.bricklink.com/catalogListOld.asp?pg=1&imgLID=346378&sortBy=N&sortAsc=A&catType=P
We look forward to what he will bring to the team. Please welcome him.
|
|
| Author: | tEoS | | Posted: | Apr 27, 2021 19:53 | | Subject: | Looney Tunes Martian without cloth? | | Viewed: | 101 times | | Topic: | Catalog | | Status: | Open | |
| My Martian did not come with the cloth piece. Did this happen to anyone else?
[s=coltun-10]
|
| Author: | steverus | | Posted: | Apr 25, 2021 11:14 | | Subject: | Please add alternative item to 3626bpb0783 | | Viewed: | 38 times | | Topic: | Catalog | | Status: | Open | |
| Hi
Please can you add a hollow stud version of 3626bpb0783. Thank you
|
| Author: | Hexy | | Posted: | Apr 24, 2021 19:56 | | Subject: | Multipack | | Viewed: | 79 times | | Topic: | Catalog | | Status: | Open | |
| Part
has a note displaying what sets it is in, however the catalogue states it doesn't
show in any sets. I was thinking of adding them as alternates to the sets but
thought I should get others opinions first. Should I add it as an Alternate,
Counterpart, Regular or Extra?
Regards,
Theo - The_RealRedHex
|
| Author: | runner.caller | | Posted: | Apr 23, 2021 23:17 | | Subject: | lol, snarling | | Viewed: | 147 times | | Topic: | Catalog | | Status: | Open | |
| I've trained myself to search lopsided, and smirk, but this is the first
I've seen "snarling" haha.
|
| Author: | Jabbz | | Posted: | Apr 23, 2021 07:33 | | Subject: | Misprint or am I being silly? | | Viewed: | 225 times | | Topic: | Catalog | | Status: | Open | |
| Hi all,
I recently came across this Jar Jar Binks head (pictured on the right) and I
can't seem to identify it on BL. It is not like any of the three variants
of the mold. I think it could be misprint of 92743pb03 (which is pictured on
the left).
If I am horribly wrong please point me in the right direction! My Star Wars knowledge
is not the best!
Thanks
|
|
| Author: | grimsbricksuk | | Posted: | Apr 22, 2021 11:44 | | Subject: | sw1145 Poe & sw1147 Yoda | | Viewed: | 61 times | | Topic: | Catalog | | Status: | Open | |
| What happened to Star Wars minifig codes sw1144 & sw1146? Are we just skipping
numbers now, as neither of them exist!
I don’t get why Yoda was changed from sw1144 to sw1145 for no apparent reason?
|
| Author: | calsbricks | | Posted: | Apr 22, 2021 10:40 | | Subject: | Brown (Old) 3957 | | Viewed: | 75 times | | Topic: | Catalog | | Status: | Open | |
| We have 2 of these in stock and were about to submit a photo (none in catalogue)
when we saw that whilst it is listed as a known colour it is not shown in any
sets. I thought that was not the policy - if not in set not a known colour???
Clarification, please.
|
|
| Author: | Admin_Russell | | Posted: | Apr 20, 2021 20:12 | | Subject: | Changes involving the CEP | | Viewed: | 423 times | | Topic: | Catalog | | Status: | Open | |
| Dear community,
We are sad to inform you that our Catalog Adminstrator StormChaser is no longer
part of the Community Expert Program. We will be updating the Community Admin
page soon.
StormChaser has positively influenced the catalog in many ways, and his passion
for documentation and organization are legendary. We are planning to move ahead
with initiatives he has set in motion and keep alive his vision for a better
catalog.
We must also mention that this is a difficult time for the catalog team, as they
have lost two very experienced admins since the beginning of the year. In the
coming weeks we will announce some plans for the future.
The BrickLink Team
|
|
| Author: | BlackbirdToys | | Posted: | Apr 18, 2021 00:49 | | Subject: | Looney Tunes minifigures | | Viewed: | 133 times | | Topic: | Catalog | | Status: | Open | |
| Is it just me, I can't find the new Looney Tunes minifigures in the catalog.
Are they listed ?
|
| Author: | Royroy | | Posted: | Apr 17, 2021 13:21 | | Subject: | BSX file of all SW minifigures? | | Viewed: | 61 times | | Topic: | Catalog | | Status: | Open | |
| Does anybody have a bsx or other usable file with all the SW Minifigures that
she/he woulnd't mind sharing?
It would save me some boring work
Have a nice evening!
|
|
| Author: | heomin61 | | Posted: | Apr 15, 2021 10:49 | | Subject: | Minecraft Water Animal should be minifigures | | Viewed: | 63 times | | Topic: | Catalog | | Status: | Open | |
| In CatalogueList Animal, Water (https://www.bricklink.com/catalogList.asp?catType=P&catString=145
), there are several minecraft animals, such as minedolphin01, mineguardian01,
mineguardian02, mineturtle1, but they have different characteristics from parts,
that is, they are some kind of minifigures not parts.
Almost all the part are inseparable, but the minecraft water animals are built
from several bricks. The item description says they are appeared in some sets
(for example, the mineturtle1 is appeared in 21152-1), but they are not in the
sets, only the parts of the animal appears. I think that is not good for inventory
management.
In case of minecraft iron golem (min082, min093), they are minifigures, not parts.
I think the two groups is very similar in nature. So all of the minecraft water
animals should be moved from parts to minifigures. Then, the minecraft sets management
will be more consistent, I believe.
Thank you for reading.
Min
|
|
| Author: | goldknight | | Posted: | Apr 14, 2021 18:27 | | Subject: | Sw1144 yoda | | Viewed: | 101 times | | Topic: | Catalog | | Status: | Open | |
| This yoda is from the atlas book that I just received. The yoda is in a clamshell
in front of the book with a camera, walking stick, map, and backpack. The yoda
was assembled already. My question is that I see the picture of sw1144 with the
backpack on but it was not assembled that way on the clamshell—do we need another
picture of yoda without backpack or just let it be?
|
|
| Author: | alex10552 | | Posted: | Apr 13, 2021 18:02 | | Subject: | Adding items to BrickLink's inventory | | Viewed: | 102 times | | Topic: | Catalog | | Status: | Open | |
| I have several unique pieces with stickers on them that are not in BrickLink's
inventory catalog. One is from a Moana set, and also 4 different parts belonging
to the Death Star Final Duel II (Star Wars) set. The Final Duel set currently
has zero parts with stickers in its inventory. This definitely needs an update.
I've never submitted items to be added myself, and so I'm pretty unfamiliar
with the process. How can I get these parts added into the system? Thank you.
|
|
| Author: | roguemjr | | Posted: | Apr 13, 2021 12:50 | | Subject: | Set 911-1 shows incorrect turntable | | Viewed: | 74 times | | Topic: | Catalog | | Status: | Open | |
| Hello,
I was thrilled when my parts for 911-1 showed up to once again build my first
LEGO set. However, the turn table listed in the part list for this set on Brickling
is incorrect.
Current part: Item No: 3403c01 - Turntable 4 x 4 Square Base with Same Color
Turntable 4 x 4 Top (3403 / 3404)
Correct part: Item No: 3404ac01 - Turntable 4 x 4 Complete, Faceted
See attached instructions for correct part verification.
Thanks,
Michael
roguemjr
Madstone's Emporium
|
|
|
| Author: | MarcHatSteine | | Posted: | Apr 13, 2021 12:39 | | Subject: | Plate 6x8 Light Blue Gray wrong color image | | Viewed: | 81 times | | Topic: | Catalog | | Status: | Open | |
| I don't know if this is the right place to post this - if not, please tell
me where I should direct it to. I just noticed that the color of Plate 6 x 8
in Light Bluish Gray is way off from all the other Light Bluish Gray color images.
To me it almost looks like a Dark Gray. Is there a reason for that? because most
of the other plate images are consistent in color.
|
|
| Author: | sskryten | | Posted: | Apr 13, 2021 10:56 | | Subject: | Adding more details to a page | | Viewed: | 59 times | | Topic: | Catalog | | Status: | Open | |
| Hi everyone.
I am a new member and whilst searching for items I have come across a few items
that need editing or more details added to them.
How can I edit or supply more details??
An example is item min093, says it is found in set 21132 which is incorrect.
It appears in sets 21123 and 21128
Steve
|
|
| Author: | normann1974 | | Posted: | Apr 13, 2021 10:48 | | Subject: | Inventory for gear 40315 | | Viewed: | 68 times | | Topic: | Catalog | | Status: | Open | |
| I've just added inventory for [G=40315]. Apparently, it has been missing
since 2018. I have few notes:
1) I can not offer to submit a picture of the assembled set as I need the parts
in condition "new". Instead, I'll submit photo of the sealed (poly)bags and
their contents sorted roughly by the steps in the instructions.
2) This gear has an "instructions" entry, but my set had no instructions in the
bag. Is this the correct way to handle this situation?
3) Do you need the three goal paper figures created as individual gear and added
as counterparts?
/Jan
|
|
| Author: | Tollo | | Posted: | Apr 13, 2021 10:40 | | Subject: | 9355 instruction | | Viewed: | 56 times | | Topic: | Catalog | | Status: | Open | |
| Good evening.
There someone that has instruction for SET 9355 or/and some photos, in order
to understan better HOW TO MAKE IT?
thanks in advance for who can HELP me
Tollo
|
| Author: | Stuart9 | | Posted: | Apr 10, 2021 15:10 | | Subject: | Marbled versions of earliest baseplate bb0340 | | Viewed: | 98 times | | Topic: | Catalog | | Status: | Open | |
| Thought I'd ask if there is any point trying to add images of these to the
catalogue or does the marbling and the block rule them out ?
Thanks in advance.
Stuart
|
|
| Author: | Creative_Brick | | Posted: | Apr 10, 2021 01:19 | | Subject: | Shipping Cost Seems High | | Viewed: | 180 times | | Topic: | Catalog | | Status: | Open | |
| I put in an order with a seller for a minifigure keychain and was invoiced $9.00
for shipping. While I understand some shops have fees and some will charge extra
for not meeting a big enough buy or lot limit, the seller specifically listed
in his T&C that he has no fees and there were no lot limits or minimum buys listed
anywhere in his shop. I've never had anyone quote me this high a price on
shipping, especially when the seller lives in the same state that I do. Does
this seem like a reasonable shipping cost? Should I try messaging the seller?
Is there a way I can cancel the order?
|
|
| Author: | CamelCityBH | | Posted: | Apr 9, 2021 22:25 | | Subject: | 33299 vs 61408 | | Viewed: | 70 times | | Topic: | Catalog | | Status: | Open | |
| While adding inventory this evening, I found that the pictures shown for 33299
and 61408 seem to be reversed. I have a lot of both in multiple colors. The
items that match the images for 61408 clearly show "33299" inside a circle on
one face. The items that match the images for 33299 do not have a part number
visible anywhere. We checked approximately 50 of each.
Is it possible that someone submitted the images wrong?
|
| Author: | legomaster100 | | Posted: | Apr 7, 2021 21:41 | | Subject: | how to add parts from rebrickable | | Viewed: | 57 times | | Topic: | Catalog | | Status: | Open | |
| For set 21326 winnie the pooh, parts list is available in rebrickable and not
bricklink.
Can I add it to bricklink somehow??
Thanks
-Brick Llama
|
| Author: | tpr | | Posted: | Apr 7, 2021 14:53 | | Subject: | Chrome Silver Legs - confirmation | | Viewed: | 111 times | | Topic: | Catalog | | Status: | Open | |
| Hi
Can anyone confirm the base colour of the Hips and Legs that are Chrome Silver
Thanks
tpr
|
| Author: | razorflan | | Posted: | Apr 6, 2021 14:28 | | Subject: | Sticker part 2335pb164 sticker orientation | | Viewed: | 54 times | | Topic: | Catalog | | Status: | Open | |
| Set 70906 part 2335pb164 the sticker in the image for this part is applied incorectly.
Just check the image for set 70906 clips are at the top 'bang' 😲
|
|
|
| Author: | Admin_Russell | | Posted: | Apr 6, 2021 01:30 | | Subject: | New Packing Dimensions Feature | | Viewed: | 321 times | | Topic: | Catalog | | Status: | Open | |
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
|
| Author: | roguemjr | | Posted: | Apr 4, 2021 01:46 | | Subject: | New entry??? | | Viewed: | 75 times | | Topic: | Catalog | | Status: | Open | |
| To whom it may concern:
Is it possible to create an assembly for the attached 1x6 yellow brick with driver
side sticker from set 5510-1? I see there is another assembly for another sticker
for this part. Or how should I list this part to found by people who may be
looking for it.
Thanks,
roguemjr
|
|
|
| Author: | Ddriver | | Posted: | Apr 3, 2021 02:53 | | Subject: | tls095 Lego Employee, Kidsfest 2013 | | Viewed: | 84 times | | Topic: | Catalog | | Status: | Open | |
| Hello,
On the article page of "TLS095 LEGO EMPLOYEE, MALE WITH Apron, Lego Store at
Kidsfest 2013" is a wrong picture where the Minifigur shows in the blister.
The picture with blister is from the "Creativity Tour 2014" and not from the
Kids Festival 2013.
The right picture is attached here.
Where can I report that because the user who does make the changes on the page
can not be notified by mail, as this user has blocked the mail?
Best regards Daniel.
|
|
|
|
| Author: | Hexy | | Posted: | Apr 1, 2021 05:08 | | Subject: | Set numbers in Part Titles | | Viewed: | 62 times | | Topic: | Catalog | | Status: | Open | |
| There are a lot of stickered or printed part stating the set the come from
at the end of the name, for example
At what number does it become unsuitable to put several sets in the name.
I've seen some with 2 but rarely any with 3. Also, does anyone have an opinion
if they should stay or be removed? Because I would much rather a cleaner, simple
title. It is annoying that some don't have this in their title, even if they
only have 1 or 2 sets.
Regards,
Theo - The_RealRedHex
|
|
| Author: | StormChaser | | Posted: | Apr 1, 2021 04:59 | | Subject: | Items Moved Today | | Viewed: | 199 times | | Topic: | Catalog | | Status: | Open | |
| Everything on this list has been moved except for the last two items:
https://www.bricklink.com/help.asp?helpID=2487
We ran into a brief hiccup with those item type changes, but we plan to get them
moved later today. Let us know if you see anything on the list we missed.
As some of you already noticed, the list of moved items is about 1/9th the proposed
size. For a variety of reasons, we weren't able to accomplish the other
changes. This does not necessarily mean they won't happen, but merely that
they aren't happening right now.
For our October 1st, 2021 list, we're doing things differently to reduce
confusion. We'll post a page for that soon and begin listing items between
now and then. We'll lock it down on September 1st and every single item
placed on the October 1st page will be moved.
For anyone wondering about this process, our goal was to reduce confusion about
where things belong in the catalog. The project consisted of two steps:
1. Define in writing what should be in each category.
2. Move parts as necessary to conform with written definitions.
We've completed step one, for the most part (although it's still being
tweaked here and there). Now we're working (slowly) through step two.
Let us know if you have any questions or comments.
|
|
| Author: | moreshelfspace | | Posted: | Mar 31, 2021 21:10 | | Subject: | 970c00pb0364 description color | | Viewed: | 41 times | | Topic: | Catalog | | Status: | Open | |
| The description for Wonder Woman's legs says they are white markings, but
the piece I have's paint is silver, not white. (So neither a search for "white"
or "boots" turn up any results for the piece)
|
| Author: | cosmicray | | Posted: | Mar 31, 2021 14:23 | | Subject: | Dimensions of tires | | Viewed: | 57 times | | Topic: | Catalog | | Status: | Open | |
| I would like to provide a Catalog dimension for
Plus the various part assemblies that include that tire. The change page suggests
that the numbers are in studs. Is this correct, or should I be entering in cm
?
According to my caliper the tire really does measure 30 x 30 x 14 mm.
When entering the dimensions for the assemblies, do I do that with the wheel
inserted in the tire, or with them side by side ? example
Nita Rae
|
|
| Author: | SurplusParts | | Posted: | Mar 31, 2021 07:12 | | Subject: | where does this go in the catologue? | | Viewed: | 85 times | | Topic: | Catalog | | Status: | Open | |
| I have this poster that i received with the VIP program from Lego when i purchased
the new Ghostbustern ECTO-1.
I wasn't sure where it goes in the catalogue. I looked in Gear osters for
it. I wasn't sure if that is where it goes?
If yes, i am happy to add to the catalogue if it is not already there.
Thanks
|
|
| Author: | tons_of_bricks | | Posted: | Mar 30, 2021 10:38 | | Subject: | Why so few changes approved? | | Viewed: | 122 times | | Topic: | Catalog | | Status: | Open | |
| Since it was only a couple days before April 1st, we decided to start organizing
the pieces by the new changes that were going to be done April 1st. https://www.bricklink.com/help.asp?helpID=2487
Now today, I notice that a ton of them say not approved, including many that
made sense. So is there a reason?
|
|
| Author: | skvely | | Posted: | Mar 29, 2021 22:37 | | Subject: | Super Heroes | | Viewed: | 52 times | | Topic: | Catalog | | Status: | Open | |
| Forgive me if this has been asked before, but why do "Batman I" and "Spider-Man"
get their own top-level categories under Set, when all similar categories are
under "Super Heroes" (including another "Spider-Man", I assume another generation)?
"DC Super Hero Girls" is also a top-level category. I understand that more since
it uses the minidolls instead of minifigures, but I would still consider it Super
Heroes.
Also, it bothers me that "Super Heroes" isn't subdivided into "Marvel" and
"DC" (the categories "Buildable Figures", "Sculptures", "Mighty Micros", and
"Super Heroes Other" could also be at that level to avoid fracturing things too
much).
|
|
| Author: | paulvdb | | Posted: | Mar 29, 2021 13:48 | | Subject: | Image requested for set 40443-1 sticker sheet | | Viewed: | 47 times | | Topic: | Catalog | | Status: | Open | |
|
The person who submitted the pending inventory for this set did not take a photo
of the sticker sheet before using it. So I would appreciate if anyone who has
an unused sticker sheet can supply an image for it.
|
| Author: | StormChaser | | Posted: | Mar 29, 2021 11:25 | | Subject: | Our First Additional Note Link | | Viewed: | 138 times | | Topic: | Catalog | | Status: | Open | |
| Today we added our first link to another website in an additional note:
Thought that was kinda cool and worth sharing.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
)
)
)
