Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | axaday | Posted: | May 3, 2021 13:07 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 40 times | Topic: | Catalog | |
| In Catalog, qwertyboy writes:
| In Catalog, axaday writes:
| In Catalog, randyf writes:
| That graph shows everything. The tool was needed, and it was needed long before
Instant Checkout should have ever gone live. Better late than never, but the
new tool is obviously a success and will help fill in the data for IC quickly.
|
The tool depicted in that graph was me.
|
Obviously a pretty sharp tool.
Niek.
|
Mileage will vary
|
|
Author: | cosmicray | Posted: | May 3, 2021 11:44 | Subject: | Re: Catalog page Packing Dimensions Add button | Viewed: | 31 times | Topic: | Catalog | |
| In Suggestions, BasKrie writes:
| In Suggestions, cosmicray writes:
| When viewing a Catalog page, and I see packing dimensions missing (i.e. with
a question mark) it would be so handy if there were an Add button right there,
that takes me to the correct page, with all the parameters preloaded, and all
I have to do is enter the correct numbers. That would enable, and encourage,
many missing PDs to be added.
Nita Rae
|
https://www.bricklink.com/message.asp?ID=1267939
It's already there, just have to activate it
|
Got it, thanks !
|
|
Author: | Vosblokjes | Posted: | May 3, 2021 11:36 | Subject: | Re: Catalog page Packing Dimensions Add button | Viewed: | 25 times | Topic: | Catalog | |
| In Suggestions, cosmicray writes:
| When viewing a Catalog page, and I see packing dimensions missing (i.e. with
a question mark) it would be so handy if there were an Add button right there,
that takes me to the correct page, with all the parameters preloaded, and all
I have to do is enter the correct numbers. That would enable, and encourage,
many missing PDs to be added.
Nita Rae
|
https://www.bricklink.com/message.asp?ID=1267939
It's already there, just have to activate it
|
|
Author: | qwertyboy | Posted: | May 3, 2021 11:21 | Subject: | Re: Catalog page Packing Dimensions Add button | Viewed: | 22 times | Topic: | Catalog | |
| In Suggestions, cosmicray writes:
| When viewing a Catalog page, and I see packing dimensions missing (i.e. with
a question mark) it would be so handy if there were an Add button right there,
that takes me to the correct page, with all the parameters preloaded, and all
I have to do is enter the correct numbers. That would enable, and encourage,
many missing PDs to be added.
|
Uhmmm - can't you just click on the question mark? For me it brings up the
"change item" form.
Niek.
|
|
Author: | cosmicray | Posted: | May 3, 2021 11:13 | Subject: | Catalog page Packing Dimensions Add button | Viewed: | 61 times | Topic: | Catalog | Status: | Open | |
| When viewing a Catalog page, and I see packing dimensions missing (i.e. with
a question mark) it would be so handy if there were an Add button right there,
that takes me to the correct page, with all the parameters preloaded, and all
I have to do is enter the correct numbers. That would enable, and encourage,
many missing PDs to be added.
Nita Rae
|
|
Author: | normann1974 | Posted: | May 3, 2021 11:00 | Subject: | Re: Promotional set "Kamille" | Viewed: | 50 times | Topic: | Catalog | |
| In Catalog, wildchicken13 writes:
| In Catalog, normann1974 writes:
| A friend of mine has informed me of a promotional set "Kamille" given out to
children at one or more LEGO events by the Danish supermarket "Bilka". Kamille
is one of the supermarket's mascots. The set came in a LEGO zip-lock bag,
and it's unknown whether or not it came with instructions in the bag, it
may have been available only to the event hosts. A PDF version of the instructions
have been made available by Bilka on request.
Please see attached images.
Is this a set that is allowed to be put on BL?
/Jan
|
I don't see any reason why not; plenty of promotional sets are sold here
on BrickLink. You'll need to create a catalog entry for it first, though.
|
Yes, the catalog, that's the only thing I'm interested in. I don't
think she plans on selling the set. Because the set doesn't come with building
instructions, I don't believe it's actually worth much (it's just
standard bricks in a standard LEGO zip-lock bag).
Actually, I've found out that there is more than this single promotional
set from the events. There seems to be at least 4 others. I'll dig into it
and try to get my hands on some details.
/Jan
|
|
Author: | DarthRaynor | Posted: | May 3, 2021 10:57 | Subject: | Inventory Change Request for Set 4504-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 6 Part 4623 Black Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length)
* Add 6 Part 4623a Black Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)
Comments from Submitter:
I own the set and kept it built since I bought it. Just recently disassembled it for storage and using BL inventory to ensure I have all parts.
Note: I have the Blue Box version, so that is the only version to which I applied this change request.
|
|
Author: | InsanityBeckonz | Posted: | May 3, 2021 09:01 | Subject: | Inventory Change Request for Set 60172-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 892pb036 Light Bluish Gray Road Sign 2 x 2 Triangle with Clip with Black Falling Rocks Pattern (Sticker) - Set 60172 (Counterpart)
* Add 1 Part 3010pb310 Dark Bluish Gray Brick 1 x 4 with 'JM60172' License Plate Pattern (Sticker) - Set 4433 (Counterpart)
* Add 1 Part 92593pb045 Dark Bluish Gray Plate, Modified 1 x 4 with 2 Studs without Groove with 'JM60172' License Plate Pattern (Sticker) - Set 60172 (Counterpart)
|
|
Author: | WhiteVanMan | Posted: | May 3, 2021 07:53 | Subject: | Inventory Change Request for Set 75940-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb847 Light Bluish Gray Tile 1 x 2 with Groove with Vehicle Control Panel Two Sliders Pattern (Alternate)
Comments from Submitter:
Just parted out 4 sealed sets of the 75940, and 2 had the above tile.
Hence this inventory addition request.
|
|
Author: | Admin_Russell | Posted: | May 2, 2021 23:04 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 72 times | Topic: | Catalog | |
| In Catalog, Admin_Russell writes:
| I'd also like to include a little chart showing the effect of releasing this
tool (see Image 3). And we still have 4 more days to go in April.
|
Here is the chart with the final April numbers, in addition to all the data from
the last 3 years. There is about 6 months of data from right after Instant Checkout
was released that is not included here, but we'll have that with a future
update. It will not be much different than what's shown in the first part
of the graph.
In May of last year, we experienced a surge of requests from the community which
resulted in an overload of the manual process. We had been planning to add Packing
Dimensions to the standard catalog change forms from the beginning, as can be
seen from a footnote to the original Forum article on Packing Dimensions in October
2017:
2) integration of the System Packaging Dimensions field into catalog submission
forms
But it was really the gentle push from the community that put this project on
the priority list.
|
|
|
Author: | wildchicken13 | Posted: | May 2, 2021 23:01 | Subject: | Re: Promotional set "Kamille" | Viewed: | 46 times | Topic: | Catalog | |
| In Catalog, normann1974 writes:
| A friend of mine has informed me of a promotional set "Kamille" given out to
children at one or more LEGO events by the Danish supermarket "Bilka". Kamille
is one of the supermarket's mascots. The set came in a LEGO zip-lock bag,
and it's unknown whether or not it came with instructions in the bag, it
may have been available only to the event hosts. A PDF version of the instructions
have been made available by Bilka on request.
Please see attached images.
Is this a set that is allowed to be put on BL?
/Jan
|
I don't see any reason why not; plenty of promotional sets are sold here
on BrickLink. You'll need to create a catalog entry for it first, though.
|
|
Author: | axaday | Posted: | May 2, 2021 19:12 | Subject: | Inventory Change Request for Set 76130-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87615pb08 White Aircraft Fuselage Aft Section Curved Top 6 x 10 with Black 'Stark Industries' Logo Pattern on Both Sides (Stickers) - Set 76130 (Counterpart)
* Add 2 Part 3010pb309 White Brick 1 x 4 with 2 Black Round Airplane Windows Pattern (Sticker) - Set 76130 (Counterpart)
* Add 2 Part 3009pb239 White Brick 1 x 6 with 3 Black Round Airplane Windows Pattern (Sticker) - Set 76130 (Counterpart)
* Add 1 Part 85984pb316 Tan Slope 30 1 x 2 x 2/3 with Targeting Screen Pattern (Sticker) - Set 76130 (Counterpart)
* Add 1 Part 28192pb003 White Slope 45 2 x 1 with Control Panel Buttons Pattern (Sticker) - Set 76130 (Counterpart)
* Add 1 Part 28192pb002 White Slope 45 2 x 1 with Control Panel Circles Pattern (Sticker) - Set 76130 (Counterpart)
* Add 1 Part 3069bpb923 White Tile 1 x 2 with Groove with Spider and Control Panel Pattern (Sticker) - Set 76130 (Counterpart)
|
|
Author: | normann1974 | Posted: | May 2, 2021 17:51 | Subject: | Promotional set "Kamille" | Viewed: | 173 times | Topic: | Catalog | Status: | Open | |
| A friend of mine has informed me of a promotional set "Kamille" given out to
children at one or more LEGO events by the Danish supermarket "Bilka". Kamille
is one of the supermarket's mascots. The set came in a LEGO zip-lock bag,
and it's unknown whether or not it came with instructions in the bag, it
may have been available only to the event hosts. A PDF version of the instructions
have been made available by Bilka on request.
Please see attached images.
Is this a set that is allowed to be put on BL?
/Jan
|
|
|
Author: | samsam2 | Posted: | May 2, 2021 17:28 | Subject: | Inventory Change Request for Set 41300-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87079pb929 White Tile 2 x 4 with Puppy in Pink Sunglasses Shaking a Paw and Obstacle Jumping Pattern (Sticker) - Set 41300 (Counterpart)
* Add 1 Part 14769pb406 White Tile, Round 2 x 2 with Bottom Stud Holder with Pink '10', Yellow Star and Five White Stars on Silver Background Pattern (Sticker) - Set 41300 (Counterpart)
* Add 1 Part 87079pb930 White Tile 2 x 4 with Pink Paw Print on Trophy and Silver Stars Pattern (Sticker) - Set 41300 (Counterpart)
|
|
Author: | randyf | Posted: | May 2, 2021 14:18 | Subject: | Re: Inventory Change Request for Set 70168-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, martintoystore writes:
| Please make changes to the following inventory:
* Add 1 Part 3839b Dark Bluish Gray Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
|
This request will not be accepted.
The part is already included in the inventory by way of the minifigure
Cheers,
Randy
|
Author: | martintoystore | Posted: | May 2, 2021 13:11 | Subject: | Inventory Change Request for Set 70168-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3839b Dark Bluish Gray Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
|
Author: | legoman007 | Posted: | May 2, 2021 12:51 | Subject: | Re: thumbnail gallery display | Viewed: | 34 times | Topic: | Catalog | |
| In Catalog, ciprinius writes:
| When i open any category in catalog there is "list with images" displayed by
default. I prefer thumbnail gallery to be default. Is there any way to set this
in settings somewhere?
|
Hi, I also just met this annyoing issue and solution is to allow more cookies.
You can adjust cookies for BL at the very bottom of the page in "Cookie Settings
and Privacy". I allowed the first three cookies and now it is working again
|
|
Author: | DarthRaynor | Posted: | May 2, 2021 11:24 | Subject: | Inventory Change Request for Set 7659-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 30350 Dark Bluish Gray Tile, Modified 2 x 3 with 2 Clips - (Undetermined Clip Type)
* Add 1 Part 30350c Dark Bluish Gray Tile, Modified 2 x 3 with 2 U Clips
Comments from Submitter:
I own the set and kept it built since I bought it. Just recently disassembled it for storage and using BL inventory to ensure I have all parts.
|
|
Author: | a.ch | Posted: | May 2, 2021 11:10 | Subject: | Inventory Change Request for Set 6195-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {2 to 1} Part Black 3711 Technic, Link Chain (Extra)
Comments from Submitter:
I've got a sealed set and there's just one extra chain link, not 2.
|
|
Author: | tec | Posted: | May 2, 2021 08:23 | Subject: | Re: Wanted List Inventory | Viewed: | 39 times | Topic: | Suggestions | |
| With the "apply order" button you see a table with proposed amounts to add
It's not easy to spot things that overflow. This is what the OP is finding
out I think.
I prefer to NOT HAVE an automatic overflow mechanism as the OP posted, I fear
I can't control it. I still prefer to see what happens and write down notes.
I dunno if they can highlight in yellow/red/orange when the amounts are inequal.
This could be informative and yet adaptable to user's habits.
|
|
Author: | Roxyncz | Posted: | May 2, 2021 05:54 | Subject: | Inventory Change Request for Set 10265-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb921 Tan Tile 1 x 2 with Groove with Car Radio Pattern (Sticker) - Set 10265 (Counterpart)
* Add 2 Part 2431pb690 Blue Tile 1 x 4 with White 'POWER BY FORD' Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 2431pb687 White Tile 1 x 4 with 'K AM58IH' License Plate Pattern (Sticker) - Set 10265 (Counterpart)
* Add 2 Part 2431pb689 White Tile 1 x 4 with 'NSW' and 'BAD-5296' License Plate Pattern (Sticker) - Set 10265 (Counterpart)
* Add 2 Part 87079pb927 Yellow Tile 2 x 4 with 'MICHIGAN' and 'GT 1967' License Plate Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 3069bpb922 Light Bluish Gray Tile 1 x 2 with Groove with Black Car on White Background Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 14769pb404 Light Bluish Gray Tile, Round 2 x 2 with Bottom Stud Holder with Black 'GT' Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 3941pb40 White Brick, Round 2 x 2 with Axle Hole with Red 'AFK' and 'N2O' Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 2431pb688 White Tile 1 x 4 with License Plate 'PEKH-0280' on White Background Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 2431pb691 Yellow Tile 1 x 4 with 'PEKH-0280' License Plate on Yllow Background Pattern (Sticker) - Set 10265 (Counterpart)
* Add 2 Part 87079pb926 Dark Blue Tile 2 x 4 with with 'CALIFORNIA' and 'P51 AK2' License Plate Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 27925pb005 Blue Tile, Round Corner 2 x 2 Macaroni with Black '390 HIGH PERFORMANCE' and Checkered Pattern (Sticker) - Set 10265 (Counterpart)
* Add 1 Part 93273pb154 Black Slope, Curved 4 x 1 Double with Silver 'CAUTION FAN' with Border on Orange Background Pattern (Sticker) - Set 10265 (Counterpart)
|
|
Author: | Leftoverbricks | Posted: | May 2, 2021 04:59 | Subject: | Pending approval: mineravager01 | Viewed: | 88 times | Topic: | Catalog | Status: | Open | |
| Can I help the inventory/catalog admin with this part? |
Author: | jpoplover1979 | Posted: | May 1, 2021 21:39 | Subject: | Inventory Change Request for Set 60226-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb847 Light Bluish Gray Tile 1 x 2 with Groove with Vehicle Control Panel Two Sliders Pattern (Alternate)
Comments from Submitter:
Came in my set of 60226 Mars Research Shuttle instead of part 3069bpc1
|
Author: | peregrinator | Posted: | May 1, 2021 17:27 | Subject: | Inventory Change Request for Set 40220-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 40220stk01b (Not Applicable) Sticker Sheet for Set 40220 - (35024/6200592) (Alternate) (match ID 1)
Comments from Submitter:
Comes from sealed set bought directly from Lego
|
|
Author: | MrPetovan | Posted: | May 1, 2021 16:08 | Subject: | Re: Wanted List Inventory | Viewed: | 41 times | Topic: | Suggestions | |
| Indeed, but not multiple ones. So if you bought 20 of something, you can apply
5 to wanted list A, and it will still try to apply the full 20 from the same
order to wanted list B even if 5 were used completing wanted list A.
In Suggestions, Brickwilbo writes:
| In Suggestions, orchidelique writes:
| It would be nice if there was an inventory system that all of your Wanted Lists
could look at. I'm usually working on a few different wanted lists at the
same time. Currently, if I buy 20 of a piece, I have to assign a specific number
of those to specific wanted lists. It would be nice if all of my wanted lists
looked at it and I could see when particular wanted lists reached 100%. You could
then mark that list as "Complete", and it would take those items out of the inventory
pool. Deleting a wanted list would leave the pieces in the pool.
|
With the apply order function you can complete a specific Wantlist.
|
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|