Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | cosmicray | Posted: | Apr 30, 2021 17:12 | Subject: | Lego Socks | Viewed: | 174 times | Topic: | Catalog | Status: | Open | |
| Early this morning, out doing some shopping, and spied this LEGO endcap at WalMart.
On the side was a dino and images of LEGO socks. They were not in the endcap,
nor on the LEGO aisle. Has anyone seen these in stores ? Youth or Adult sizes
? I don't see these in the Catalog.
Nita Rae
|
|
Author: | crepundi | Posted: | Apr 30, 2021 05:20 | Subject: | image of part 3192a | Viewed: | 60 times | Topic: | Catalog | Status: | Open | |
| Please correct the image of door 1 x 3 x 3 right in colour blue. It
is showing the door 1 x 3 x 4
Regards,
Gisela
|
|
Author: | _djm | Posted: | Apr 29, 2021 18:38 | Subject: | Looking for set image from Dacta (?) catalog | Viewed: | 63 times | Topic: | Catalog | Status: | Open | |
| I'm hoping someone with Dacta catalogs from the mid(?) 1990's (perhaps
1993 - 1997) can help.
I recently acquired a somewhat obscure Control Lab set:
which I am in the process of creating the catalog inventory for. There don't
appear to be any references to this set of most of the other standard sites (e,g,
brickset, peeron) and the only image I could find of this set was at http://www.miniland.nl/Dacta/sets/2001187.htm.
The set in question is the set in the yellow case at the rear of the photo.
Via the wayback machine, I've had a trawl through LEGO's various sites
and have had no joy in finding any image for this set. Based on what I have found,
my presumption is that this set would have been listed in a Dacta catalog from
sometime in the mid-1990s - it may be that this set only was for sale in the
UK/Europe, although that is speculation on my behalf.
I was wondering whether anybody with Dacta catalogs from the mid-1990's would
be willing to take a look through their catalogs to see if they can find an image
for the set. My photo skills are "lacking" and if an image for the set is available
in a catalog, it will likely be better than any photo I add. If you do find an
image for the set, would you please submit it as the image for this set. I'd
also appreciate it if you would send me a copy of the image too please, as I
would like to be able to add this set to rebrickable.com.
Thank you and regards,
David
|
|
Author: | Erikmax | Posted: | Apr 29, 2021 04:50 | Subject: | Original or coming from Ali? | Viewed: | 206 times | Topic: | Catalog | Status: | Open | |
| I recently bought YELLOW axles 50450 from a dealer on Bricklink offering them
in quantities at a reasonable price.
After arriving I noticed these axles being a bit lighter of colour. Because the
are more colour varieties I wasn't alarmed directly.
But when I looked a bit closer to the axles I also noticed the 'cross'
on the edge of the axle was a bit less sharp. I think normally there is a dimple
at one of the ends- these axes don't have one.
The combination of a quantity offer of this part, the colour difference and the
slightly rougher shape raises some questions.
If it is original: Perfect. If it isn't: How could we stop this? I guess
99% of the customers won't notice.
Or is it simply the end of the premium prices for this sort of parts??
Or place a warning with a clear description of the original?
|
|
Author: | Admin_Russell | Posted: | Apr 27, 2021 21:27 | Subject: | We have a new Inventories Administrator! | Viewed: | 289 times | Topic: | Catalog | Status: | Open | |
| Dear BrickLink members,
We have appointed to the Community Expert Program one new member today! His username
is Turez and he will be assuming the role of Inventories Administrator. As with
all other admins in this area, he will be eligible to move up through the ranks
after a period of time:
https://www.bricklink.com/feedback.asp?u=Turez
https://www.bricklink.com/memberAdmins.asp
Turez comes to us as a well-known and trusted catalog contributor who has a sharp
understanding of LEGO history and catalog related issues. He has contributed
extensively, and his contributions are of a very high quality. You can see some
of his part images here:
https://www.bricklink.com/catalogListOld.asp?pg=1&imgLID=346378&sortBy=N&sortAsc=A&catType=P
We look forward to what he will bring to the team. Please welcome him.
|
|
Author: | tEoS | Posted: | Apr 27, 2021 19:53 | Subject: | Looney Tunes Martian without cloth? | Viewed: | 101 times | Topic: | Catalog | Status: | Open | |
| My Martian did not come with the cloth piece. Did this happen to anyone else?
[s=coltun-10]
|
Author: | steverus | Posted: | Apr 25, 2021 11:14 | Subject: | Please add alternative item to 3626bpb0783 | Viewed: | 38 times | Topic: | Catalog | Status: | Open | |
| Hi
Please can you add a hollow stud version of 3626bpb0783. Thank you
|
Author: | Hexy | Posted: | Apr 24, 2021 19:56 | Subject: | Multipack | Viewed: | 79 times | Topic: | Catalog | Status: | Open | |
| Part
has a note displaying what sets it is in, however the catalogue states it doesn't
show in any sets. I was thinking of adding them as alternates to the sets but
thought I should get others opinions first. Should I add it as an Alternate,
Counterpart, Regular or Extra?
Regards,
Theo - The_RealRedHex
|
Author: | runner.caller | Posted: | Apr 23, 2021 23:17 | Subject: | lol, snarling | Viewed: | 147 times | Topic: | Catalog | Status: | Open | |
| I've trained myself to search lopsided, and smirk, but this is the first
I've seen "snarling" haha.
|
Author: | Jabbz | Posted: | Apr 23, 2021 07:33 | Subject: | Misprint or am I being silly? | Viewed: | 225 times | Topic: | Catalog | Status: | Open | |
| Hi all,
I recently came across this Jar Jar Binks head (pictured on the right) and I
can't seem to identify it on BL. It is not like any of the three variants
of the mold. I think it could be misprint of 92743pb03 (which is pictured on
the left).
If I am horribly wrong please point me in the right direction! My Star Wars knowledge
is not the best!
Thanks
|
|
Author: | grimsbricksuk | Posted: | Apr 22, 2021 11:44 | Subject: | sw1145 Poe & sw1147 Yoda | Viewed: | 61 times | Topic: | Catalog | Status: | Open | |
| What happened to Star Wars minifig codes sw1144 & sw1146? Are we just skipping
numbers now, as neither of them exist!
I don’t get why Yoda was changed from sw1144 to sw1145 for no apparent reason?
|
Author: | calsbricks | Posted: | Apr 22, 2021 10:40 | Subject: | Brown (Old) 3957 | Viewed: | 75 times | Topic: | Catalog | Status: | Open | |
| We have 2 of these in stock and were about to submit a photo (none in catalogue)
when we saw that whilst it is listed as a known colour it is not shown in any
sets. I thought that was not the policy - if not in set not a known colour???
Clarification, please.
|
|
Author: | Admin_Russell | Posted: | Apr 20, 2021 20:12 | Subject: | Changes involving the CEP | Viewed: | 423 times | Topic: | Catalog | Status: | Open | |
| Dear community,
We are sad to inform you that our Catalog Adminstrator StormChaser is no longer
part of the Community Expert Program. We will be updating the Community Admin
page soon.
StormChaser has positively influenced the catalog in many ways, and his passion
for documentation and organization are legendary. We are planning to move ahead
with initiatives he has set in motion and keep alive his vision for a better
catalog.
We must also mention that this is a difficult time for the catalog team, as they
have lost two very experienced admins since the beginning of the year. In the
coming weeks we will announce some plans for the future.
The BrickLink Team
|
|
Author: | BlackbirdToys | Posted: | Apr 18, 2021 00:49 | Subject: | Looney Tunes minifigures | Viewed: | 133 times | Topic: | Catalog | Status: | Open | |
| Is it just me, I can't find the new Looney Tunes minifigures in the catalog.
Are they listed ?
|
Author: | Royroy | Posted: | Apr 17, 2021 13:21 | Subject: | BSX file of all SW minifigures? | Viewed: | 61 times | Topic: | Catalog | Status: | Open | |
| Does anybody have a bsx or other usable file with all the SW Minifigures that
she/he woulnd't mind sharing?
It would save me some boring work
Have a nice evening!
|
|
Author: | heomin61 | Posted: | Apr 15, 2021 10:49 | Subject: | Minecraft Water Animal should be minifigures | Viewed: | 63 times | Topic: | Catalog | Status: | Open | |
| In CatalogueList Animal, Water (https://www.bricklink.com/catalogList.asp?catType=P&catString=145
), there are several minecraft animals, such as minedolphin01, mineguardian01,
mineguardian02, mineturtle1, but they have different characteristics from parts,
that is, they are some kind of minifigures not parts.
Almost all the part are inseparable, but the minecraft water animals are built
from several bricks. The item description says they are appeared in some sets
(for example, the mineturtle1 is appeared in 21152-1), but they are not in the
sets, only the parts of the animal appears. I think that is not good for inventory
management.
In case of minecraft iron golem (min082, min093), they are minifigures, not parts.
I think the two groups is very similar in nature. So all of the minecraft water
animals should be moved from parts to minifigures. Then, the minecraft sets management
will be more consistent, I believe.
Thank you for reading.
Min
|
|
Author: | goldknight | Posted: | Apr 14, 2021 18:27 | Subject: | Sw1144 yoda | Viewed: | 101 times | Topic: | Catalog | Status: | Open | |
| This yoda is from the atlas book that I just received. The yoda is in a clamshell
in front of the book with a camera, walking stick, map, and backpack. The yoda
was assembled already. My question is that I see the picture of sw1144 with the
backpack on but it was not assembled that way on the clamshell—do we need another
picture of yoda without backpack or just let it be?
|
|
Author: | alex10552 | Posted: | Apr 13, 2021 18:02 | Subject: | Adding items to BrickLink's inventory | Viewed: | 102 times | Topic: | Catalog | Status: | Open | |
| I have several unique pieces with stickers on them that are not in BrickLink's
inventory catalog. One is from a Moana set, and also 4 different parts belonging
to the Death Star Final Duel II (Star Wars) set. The Final Duel set currently
has zero parts with stickers in its inventory. This definitely needs an update.
I've never submitted items to be added myself, and so I'm pretty unfamiliar
with the process. How can I get these parts added into the system? Thank you.
|
|
Author: | roguemjr | Posted: | Apr 13, 2021 12:50 | Subject: | Set 911-1 shows incorrect turntable | Viewed: | 74 times | Topic: | Catalog | Status: | Open | |
| Hello,
I was thrilled when my parts for 911-1 showed up to once again build my first
LEGO set. However, the turn table listed in the part list for this set on Brickling
is incorrect.
Current part: Item No: 3403c01 - Turntable 4 x 4 Square Base with Same Color
Turntable 4 x 4 Top (3403 / 3404)
Correct part: Item No: 3404ac01 - Turntable 4 x 4 Complete, Faceted
See attached instructions for correct part verification.
Thanks,
Michael
roguemjr
Madstone's Emporium
|
|
|
Author: | MarcHatSteine | Posted: | Apr 13, 2021 12:39 | Subject: | Plate 6x8 Light Blue Gray wrong color image | Viewed: | 81 times | Topic: | Catalog | Status: | Open | |
| I don't know if this is the right place to post this - if not, please tell
me where I should direct it to. I just noticed that the color of Plate 6 x 8
in Light Bluish Gray is way off from all the other Light Bluish Gray color images.
To me it almost looks like a Dark Gray. Is there a reason for that? because most
of the other plate images are consistent in color.
|
|
Author: | sskryten | Posted: | Apr 13, 2021 10:56 | Subject: | Adding more details to a page | Viewed: | 59 times | Topic: | Catalog | Status: | Open | |
| Hi everyone.
I am a new member and whilst searching for items I have come across a few items
that need editing or more details added to them.
How can I edit or supply more details??
An example is item min093, says it is found in set 21132 which is incorrect.
It appears in sets 21123 and 21128
Steve
|
|
Author: | normann1974 | Posted: | Apr 13, 2021 10:48 | Subject: | Inventory for gear 40315 | Viewed: | 68 times | Topic: | Catalog | Status: | Open | |
| I've just added inventory for [G=40315]. Apparently, it has been missing
since 2018. I have few notes:
1) I can not offer to submit a picture of the assembled set as I need the parts
in condition "new". Instead, I'll submit photo of the sealed (poly)bags and
their contents sorted roughly by the steps in the instructions.
2) This gear has an "instructions" entry, but my set had no instructions in the
bag. Is this the correct way to handle this situation?
3) Do you need the three goal paper figures created as individual gear and added
as counterparts?
/Jan
|
|
Author: | Tollo | Posted: | Apr 13, 2021 10:40 | Subject: | 9355 instruction | Viewed: | 56 times | Topic: | Catalog | Status: | Open | |
| Good evening.
There someone that has instruction for SET 9355 or/and some photos, in order
to understan better HOW TO MAKE IT?
thanks in advance for who can HELP me
Tollo
|
Author: | Stuart9 | Posted: | Apr 10, 2021 15:10 | Subject: | Marbled versions of earliest baseplate bb0340 | Viewed: | 98 times | Topic: | Catalog | Status: | Open | |
| Thought I'd ask if there is any point trying to add images of these to the
catalogue or does the marbling and the block rule them out ?
Thanks in advance.
Stuart
|
|
Author: | Creative_Brick | Posted: | Apr 10, 2021 01:19 | Subject: | Shipping Cost Seems High | Viewed: | 180 times | Topic: | Catalog | Status: | Open | |
| I put in an order with a seller for a minifigure keychain and was invoiced $9.00
for shipping. While I understand some shops have fees and some will charge extra
for not meeting a big enough buy or lot limit, the seller specifically listed
in his T&C that he has no fees and there were no lot limits or minimum buys listed
anywhere in his shop. I've never had anyone quote me this high a price on
shipping, especially when the seller lives in the same state that I do. Does
this seem like a reasonable shipping cost? Should I try messaging the seller?
Is there a way I can cancel the order?
|
|
Author: | CamelCityBH | Posted: | Apr 9, 2021 22:25 | Subject: | 33299 vs 61408 | Viewed: | 70 times | Topic: | Catalog | Status: | Open | |
| While adding inventory this evening, I found that the pictures shown for 33299
and 61408 seem to be reversed. I have a lot of both in multiple colors. The
items that match the images for 61408 clearly show "33299" inside a circle on
one face. The items that match the images for 33299 do not have a part number
visible anywhere. We checked approximately 50 of each.
Is it possible that someone submitted the images wrong?
|
Author: | legomaster100 | Posted: | Apr 7, 2021 21:41 | Subject: | how to add parts from rebrickable | Viewed: | 57 times | Topic: | Catalog | Status: | Open | |
| For set 21326 winnie the pooh, parts list is available in rebrickable and not
bricklink.
Can I add it to bricklink somehow??
Thanks
-Brick Llama
|
Author: | tpr | Posted: | Apr 7, 2021 14:53 | Subject: | Chrome Silver Legs - confirmation | Viewed: | 111 times | Topic: | Catalog | Status: | Open | |
| Hi
Can anyone confirm the base colour of the Hips and Legs that are Chrome Silver
Thanks
tpr
|
Author: | razorflan | Posted: | Apr 6, 2021 14:28 | Subject: | Sticker part 2335pb164 sticker orientation | Viewed: | 54 times | Topic: | Catalog | Status: | Open | |
| Set 70906 part 2335pb164 the sticker in the image for this part is applied incorectly.
Just check the image for set 70906 clips are at the top 'bang' 😲
|
|
|
Author: | Admin_Russell | Posted: | Apr 6, 2021 01:30 | Subject: | New Packing Dimensions Feature | Viewed: | 321 times | Topic: | Catalog | Status: | Open | |
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
|
Author: | roguemjr | Posted: | Apr 4, 2021 01:46 | Subject: | New entry??? | Viewed: | 75 times | Topic: | Catalog | Status: | Open | |
| To whom it may concern:
Is it possible to create an assembly for the attached 1x6 yellow brick with driver
side sticker from set 5510-1? I see there is another assembly for another sticker
for this part. Or how should I list this part to found by people who may be
looking for it.
Thanks,
roguemjr
|
|
|
Author: | Ddriver | Posted: | Apr 3, 2021 02:53 | Subject: | tls095 Lego Employee, Kidsfest 2013 | Viewed: | 84 times | Topic: | Catalog | Status: | Open | |
| Hello,
On the article page of "TLS095 LEGO EMPLOYEE, MALE WITH Apron, Lego Store at
Kidsfest 2013" is a wrong picture where the Minifigur shows in the blister.
The picture with blister is from the "Creativity Tour 2014" and not from the
Kids Festival 2013.
The right picture is attached here.
Where can I report that because the user who does make the changes on the page
can not be notified by mail, as this user has blocked the mail?
Best regards Daniel.
|
|
|
|
Author: | Hexy | Posted: | Apr 1, 2021 05:08 | Subject: | Set numbers in Part Titles | Viewed: | 62 times | Topic: | Catalog | Status: | Open | |
| There are a lot of stickered or printed part stating the set the come from
at the end of the name, for example
At what number does it become unsuitable to put several sets in the name.
I've seen some with 2 but rarely any with 3. Also, does anyone have an opinion
if they should stay or be removed? Because I would much rather a cleaner, simple
title. It is annoying that some don't have this in their title, even if they
only have 1 or 2 sets.
Regards,
Theo - The_RealRedHex
|
|
Author: | StormChaser | Posted: | Apr 1, 2021 04:59 | Subject: | Items Moved Today | Viewed: | 199 times | Topic: | Catalog | Status: | Open | |
| Everything on this list has been moved except for the last two items:
https://www.bricklink.com/help.asp?helpID=2487
We ran into a brief hiccup with those item type changes, but we plan to get them
moved later today. Let us know if you see anything on the list we missed.
As some of you already noticed, the list of moved items is about 1/9th the proposed
size. For a variety of reasons, we weren't able to accomplish the other
changes. This does not necessarily mean they won't happen, but merely that
they aren't happening right now.
For our October 1st, 2021 list, we're doing things differently to reduce
confusion. We'll post a page for that soon and begin listing items between
now and then. We'll lock it down on September 1st and every single item
placed on the October 1st page will be moved.
For anyone wondering about this process, our goal was to reduce confusion about
where things belong in the catalog. The project consisted of two steps:
1. Define in writing what should be in each category.
2. Move parts as necessary to conform with written definitions.
We've completed step one, for the most part (although it's still being
tweaked here and there). Now we're working (slowly) through step two.
Let us know if you have any questions or comments.
|
|
Author: | moreshelfspace | Posted: | Mar 31, 2021 21:10 | Subject: | 970c00pb0364 description color | Viewed: | 41 times | Topic: | Catalog | Status: | Open | |
| The description for Wonder Woman's legs says they are white markings, but
the piece I have's paint is silver, not white. (So neither a search for "white"
or "boots" turn up any results for the piece)
|
Author: | cosmicray | Posted: | Mar 31, 2021 14:23 | Subject: | Dimensions of tires | Viewed: | 57 times | Topic: | Catalog | Status: | Open | |
| I would like to provide a Catalog dimension for
Plus the various part assemblies that include that tire. The change page suggests
that the numbers are in studs. Is this correct, or should I be entering in cm
?
According to my caliper the tire really does measure 30 x 30 x 14 mm.
When entering the dimensions for the assemblies, do I do that with the wheel
inserted in the tire, or with them side by side ? example
Nita Rae
|
|
Author: | SurplusParts | Posted: | Mar 31, 2021 07:12 | Subject: | where does this go in the catologue? | Viewed: | 85 times | Topic: | Catalog | Status: | Open | |
| I have this poster that i received with the VIP program from Lego when i purchased
the new Ghostbustern ECTO-1.
I wasn't sure where it goes in the catalogue. I looked in Gearosters for
it. I wasn't sure if that is where it goes?
If yes, i am happy to add to the catalogue if it is not already there.
Thanks
|
|
Author: | tons_of_bricks | Posted: | Mar 30, 2021 10:38 | Subject: | Why so few changes approved? | Viewed: | 122 times | Topic: | Catalog | Status: | Open | |
| Since it was only a couple days before April 1st, we decided to start organizing
the pieces by the new changes that were going to be done April 1st. https://www.bricklink.com/help.asp?helpID=2487
Now today, I notice that a ton of them say not approved, including many that
made sense. So is there a reason?
|
|
Author: | skvely | Posted: | Mar 29, 2021 22:37 | Subject: | Super Heroes | Viewed: | 52 times | Topic: | Catalog | Status: | Open | |
| Forgive me if this has been asked before, but why do "Batman I" and "Spider-Man"
get their own top-level categories under Set, when all similar categories are
under "Super Heroes" (including another "Spider-Man", I assume another generation)?
"DC Super Hero Girls" is also a top-level category. I understand that more since
it uses the minidolls instead of minifigures, but I would still consider it Super
Heroes.
Also, it bothers me that "Super Heroes" isn't subdivided into "Marvel" and
"DC" (the categories "Buildable Figures", "Sculptures", "Mighty Micros", and
"Super Heroes Other" could also be at that level to avoid fracturing things too
much).
|
|
Author: | paulvdb | Posted: | Mar 29, 2021 13:48 | Subject: | Image requested for set 40443-1 sticker sheet | Viewed: | 47 times | Topic: | Catalog | Status: | Open | |
|
The person who submitted the pending inventory for this set did not take a photo
of the sticker sheet before using it. So I would appreciate if anyone who has
an unused sticker sheet can supply an image for it.
|
Author: | StormChaser | Posted: | Mar 29, 2021 11:25 | Subject: | Our First Additional Note Link | Viewed: | 138 times | Topic: | Catalog | Status: | Open | |
| Today we added our first link to another website in an additional note:
Thought that was kinda cool and worth sharing.
|
Author: | Zab3uk75 | Posted: | Mar 26, 2021 11:26 | Subject: | category changes | Viewed: | 58 times | Topic: | Catalog | Status: | Open | |
| Where will I find a list of category changes, past and up coming ?1st April
Thanks for your help.
June
|
Author: | Borat_Sagdiyev | Posted: | Mar 24, 2021 16:21 | Subject: | I can't see the character... | Viewed: | 122 times | Topic: | Catalog | Status: | Open | |
| Hello! I would like to add this minifigure to my inventory, but I don't see
him on the Bricklink catalog. Please, help me! Thank you in advance!
Best wishes,
Dan
|
|
Author: | normann1974 | Posted: | Mar 24, 2021 10:45 | Subject: | Shock absorber spring type | Viewed: | 100 times | Topic: | Catalog | Status: | Open | |
| I'm currently double checking these shock absorbers in my store and I'm
very much in doubt about some of them. I seem to have three different spring
sizes (see image), but BL requires them to be either "soft" or "normal". So
I guess the ones on the left are "soft" and the ones on the right are "normal",
but what about the ones in the middle? Juding by the number of winds visible
they seems to be somewhere in between.
Help is appreciated.
/Jan
|
|
Author: | terra85td | Posted: | Mar 24, 2021 06:14 | Subject: | 3070a, 3070b, 3069a, 3069b, 3068a, 3068b | Viewed: | 62 times | Topic: | Catalog | Status: | Open | |
| good morning,
all the original pieces 3070a, 3070b, 3069a, 3069b, 3068a, 3068b have the lego
logo on the back?
I have a doubt especially on 1x1
THANKS
DANIELE
|
Author: | Thargor | Posted: | Mar 24, 2021 04:44 | Subject: | Minifigure sw0737a | Viewed: | 102 times | Topic: | Catalog | Status: | Open | |
| I just saw that Minifigure sw0737a Poe Dameron was added to the catalog. This
Minifigure is included in set 75149 and comes with helmet and hair piece.
In the past we often had Minifigures that had both helmet and hair piece but
they were only listed once in the catalog e.g. sw0416, sw0772, sw0407 ...
Why is Poe now listed twice as sw0737 with hair and as sw0737a with helmet?
|
|
Author: | normann1974 | Posted: | Mar 22, 2021 19:57 | Subject: | 3003pb004 sticker too large | Viewed: | 89 times | Topic: | Catalog | Status: | Open | |
| I'm sitting with something that looks like part in my hands.
The sticker on these bricks is clearly too large to fit on one brick. So does
this sticker exist in different sizes or is the current part image showing a
cut sticker? Should this part be retired and an assembly be made instead?
Note that I've found parts [P=3068bp65] and in the same lot
of bricks, so I'd say there's virtually no chance that the stove sticker
didn't come from set .
/Jan
|
|
|
Author: | normann1974 | Posted: | Mar 22, 2021 19:11 | Subject: | FTBushH in all plastic? | Viewed: | 73 times | Topic: | Catalog | Status: | Open | |
| I seem to remember that this part is part metal (bush) and part plastic (base).
This one, though, feels like it's all plastic. Is it the same part as the
metal ones?
/Jan
|
|
Author: | jviney | Posted: | Mar 20, 2021 16:31 | Subject: | complete Lego catalog | Viewed: | 110 times | Topic: | Catalog | Status: | Open | |
| Is there a complete catalog that can be printed out? |
Author: | C0lsanders_ | Posted: | Mar 19, 2021 21:47 | Subject: | Searching catalog removes words. Why? | Viewed: | 69 times | Topic: | Catalog | Status: | Open | |
| For example, I have tile 98138pb033, a soda can top. So I search "can". Catalog
returns "The following keywords were excluded from your search: can". I then
have to search with the quotation marks for " "can" ", so it finds it. Why does
the catalog search function decide to not search the word? I've had it do
the same thing with numbers. Is it a length issue, ie, has to be a minimum of
4 characters, or something?
Thanks,
Miles (C0lsanders_)
|
|
Author: | Hexy | Posted: | Mar 17, 2021 19:48 | Subject: | Category in part titles | Viewed: | 54 times | Topic: | Catalog | Status: | Open | |
| Most of the categories in the bricklink catalogue have the category title as
the first part of the name. A few don't have that though. I understand bricklink
is currently working on written guidelines for catalogue naming, is this something
they wish to remove from titles or add to the categories that don't have
it?
Regards,
Theo - The_RealRedHex
|
Author: | mjwest83 | Posted: | Mar 16, 2021 20:34 | Subject: | Set 40449 Approval | Viewed: | 62 times | Topic: | Catalog | Status: | Open | |
| When will set 40449 be approved for listing? The set has been out for two days
now, and I'd like to do the inventory. And I can't put the set together,
if I'm gonna do the inventory. So, can it get approved?
Thanks!
|
|
Author: | Teup | Posted: | Mar 16, 2021 03:53 | Subject: | Two Weeks?! | Viewed: | 536 times | Topic: | Catalog | Status: | Open | |
| This is not a big deal for me personally as I am not currently selling here,
so I can plan it when I want.. but... really?!
The catalog changes are scheduled for April 1. That's only 2 weeks away.
I noticed that this is a DRAMATIC catalog update that will throw the entire store
upside down. Definitely won't be able to take my entire 1.2 million parts
store apart and piece it back together just casually within these next two weeks
between sorting orders. Especially moving all the wedges will be be fun puzzle.
Not gonna object against any changes, they seem alright to me. Except that there's
one change clearly missing from that list: Moving the 2x2 corner brick to Brick,
Modified.. (since plate and tile are there)
I hope this really was THE update everyone was waiting for, and now we're
satisfied..
|
|
Author: | StormChaser | Posted: | Mar 15, 2021 20:01 | Subject: | Scala Assistance Needed | Viewed: | 79 times | Topic: | Catalog | Status: | Open | |
| We have pending requests to change the titles of these two parts to remove the
word "Scala:"
Problem is, Scala has its own connection system and we don't know if these
parts are only compatible with those connections. Will the tile and dish attach
to building system parts?
If anyone has these parts and can assist us in making this decision we'd
appreciate it.
|
Author: | rick_holl | Posted: | Mar 15, 2021 15:46 | Subject: | 76170 Inventory | Viewed: | 40 times | Topic: | Catalog | Status: | Open | |
| Hi,
I'm adding the 76170 set inventory.
For the minifigs. Do you include the stand in the minifig listing as it is in
the minifig part list and instruction in the booklet?
|
Author: | yorbrick | Posted: | Mar 15, 2021 07:39 | Subject: | Vidiyo Genie | Viewed: | 107 times | Topic: | Catalog | Status: | Open | |
| Does anyone know what is holding up the Vidiyo Genie?
Minifig No: vid013 Name: Genie Dancer
Minifig No: vidbm005 Name: Genie Dancer - Minifigure only Entry
One has the right numbering but the wrong name, the other has the right name
but wrong numbering.
Is something else missing that is holding these up?
|
Author: | Jabbz | Posted: | Mar 15, 2021 05:38 | Subject: | Adding this torso | Viewed: | 66 times | Topic: | Catalog | Status: | Open | |
| Hi,
I'm hopeless at adding parts, I found this torso at a BAM last year, I was
wondering if anyone could add it for me? I believe the colour is Lavender.
Cheers,
Joe
|
|
Author: | 1974 | Posted: | Mar 14, 2021 10:53 | Subject: | No black border on black 3004p03 | Viewed: | 89 times | Topic: | Catalog | Status: | Open | |
| As the subject says ...
So, it's not the same as the white 3004p03
Also, who vacuumed the market for that part? I need a bunch
Cheers,
Ole
|
Author: | axaday | Posted: | Mar 13, 2021 21:42 | Subject: | Please Consider Complicated Merge | Viewed: | 123 times | Topic: | Catalog | Status: | Open | |
|
This piece is pending, submitted by DeLuca and photographed by me. My piece
is orange inside and orange where the stamping is and all. This submission follows
the precedent set on this mold, but I think a mistake has been repeated in that
string. I THINK the way we usually do that, it is the same piece as
and . A dark brown pieces, a red piece, and an orange piece all
with black hair pattern. Right? Fixing it requires things I can't submit
a form for.
|
|
Author: | Mirko8710 | Posted: | Mar 13, 2021 13:04 | Subject: | Venom from 242104-1 | Viewed: | 76 times | Topic: | Catalog | Status: | Open | |
| Hi guys,
Venom added to the inventory of the set is wrong:
According to instruction we need to add the neck bracket and then the appendices
as all the others Venom or Carnage or Batman with jetpacks.
I have already uploaded sh690 and its picture.
I have already request also an inventory change.
Regards,
Mirko
|
|
Author: | Bricklanta | Posted: | Mar 12, 2021 09:38 | Subject: | Problem with 40243c01 as c'part in 4706-1? | Viewed: | 40 times | Topic: | Catalog | Status: | Open | |
| I'm looking at set 4706-1 (Harry Potter - Forbidden Corridor). In the inventory
are stair components, including Light Gray steps (16x 40243) and a Black support
(1x 40244)
In counterparts, this set uses 40243c01 (Stairs Spiral Steps 16 with Support),
but that assembly calls for matching support and stairs color. This assembly
is used in 4 sets, one with LBG steps and 3 with LG steps.
However two of these use a Black support and two of them use a Tan support.
I believe following the standard of Hips & Legs parts, there should be two distinct
assemblies - 40243c01 - Stairs Spiral Steps 16 with Black Support and 40243c02
- Stairs Spiral Steps 16 with Tan Support
Am I reading this correctly?
Thank you!
|
|
Author: | Squirrelbnct | Posted: | Mar 10, 2021 16:28 | Subject: | 5372 - Skeleton Chariot | Viewed: | 101 times | Topic: | Catalog | Status: | Open | |
| Has somebody any idea why it is not possible to put Set 5372 on a wanted list
or inventory?
|
Author: | CanadaFirst | Posted: | Mar 10, 2021 10:09 | Subject: | 21763c01 | Viewed: | 48 times | Topic: | Catalog | Status: | Open | |
| Another question, trying to get the hang of this...
I just created 21763a and 21763b which are the two parts of 21763c01 and they
were approved.
First thing, the parts do not appear in a search for the item numbers but are
there in the catalog under plastic. Is this something that will be resolved on
its own with time or did I do something wrong?
Also, I noticed that 21763c01 exists as color not applicable and as red but that
the photo was only on not applicable which makes me think that it's the correct
way to list it.
Should we list and/or create plastic parts as not applicable or as their color?
|
|
Author: | roguemjr | Posted: | Mar 9, 2021 15:48 | Subject: | Do Samsonite LEGO sets count here? | Viewed: | 130 times | Topic: | Catalog | Status: | Open | |
| One of my uncles was at a garage/estate sale some 20 years ago and found 2 "sealed"
of the attached samsonite LEGO sets. I say sealed because they are just closed
ends with nothing that really seals them. I did open to verify their contents
as gently as I could. Are these considered sale-able LEGO sets here? The set
number is listed as 216 for white bricks in various sizes. Its dimensions are
approximately 3in x 4in x 1in.
Best Regards,
Michael
|
|
Author: | CanadaFirst | Posted: | Mar 9, 2021 13:04 | Subject: | Relationships | Viewed: | 120 times | Topic: | Catalog | Status: | Open | |
| Hi!
I just created a door and it was approved.
How do I add this part:
I know it's a relationship but I want to do it correctly and I'm not
sure what relationship to select, I don't see a place to select 'window,
glass & shutter'
|
|
Author: | CanadaFirst | Posted: | Mar 8, 2021 14:26 | Subject: | 7049b without holes | Viewed: | 93 times | Topic: | Catalog | Status: | Open | |
| While preparing some used bricks for listing we came across something we had
never seen before, a 7049b with no holes.
Should it be listed as a custom item, as a 7049b with a note on it?
I imagine that this is a rather uncommon item that could interest a collector
of oddities so it would sell for quite a bit more than a normal one.
Any help with listing such a strange item would be appreciated.
|
|
Author: | jviney | Posted: | Mar 7, 2021 19:29 | Subject: | complete Lego catalog | Viewed: | 99 times | Topic: | Catalog | Status: | Open | |
| Is there a complete Lego catalog A-Z that can be printed out? |
Author: | atkk | Posted: | Mar 7, 2021 10:44 | Subject: | Leg and torso dimensions | Viewed: | 39 times | Topic: | Catalog | Status: | Open | |
| Why are there no dimensions for torsos and leg assemblies in the catalog?
I think this is messing up instant checkout options, since without dimensions,
lettermail probably does not appear in shipping choices.
|
Author: | WhiteVanMan | Posted: | Mar 7, 2021 08:45 | Subject: | Changing the release date of an item | Viewed: | 82 times | Topic: | Catalog | Status: | Open | |
| Hello Admins (Stormchaser?)
I've been listing several minifig components within my store, and I noticed
that for this item
It's listed to have been released in 2014
I've got one with the 2012 date.
Can this be rectified?
Mine is Flat Silver.
Regards,
Paul
(Also, please check out my other catalogue suggestion?)
|
|
Author: | zorbanj | Posted: | Mar 6, 2021 17:24 | Subject: | Set 4748 Ogel's Mountain Fortress Grays | Viewed: | 70 times | Topic: | Catalog | Status: | Open | |
| I recently bought set 4748, used and incomplete. I went through the pieces and
there was a mixture of light gray and light bluish gray pieces. All of these
pieces were part of the set.
Not sure if the set came this way or if pieces were added afterwards.
Does anyone know if this set was released with a mixture of both light and bluish
gray pieces?
|
|
Author: | Heartbricker | Posted: | Mar 6, 2021 11:38 | Subject: | Pneumatic Hoses- same size, different part # | Viewed: | 70 times | Topic: | Catalog | Status: | Open | |
| We're in the middle of parting out 4 copies of the 8110 unimog and have an
issue we're hoping to get help on:
- Part number 5102c03 From set#8110 and part# 21761 from 42043 are the exact
same size and color, we see no difference yet they are listed under 2 part numbers
yet not mention in the listing about them being alternates.
There are other hoses with the same issue:
5102c10 and 21767 the only difference in the listing is one states 8cm and the
other is 80mm which is the same length.
Is this a catalog issue or are we missing something?
TIA
|
|
Author: | Trusconi | Posted: | Mar 6, 2021 02:52 | Subject: | Which one (of these) is the rarest set? | Viewed: | 92 times | Topic: | Catalog | Status: | Open | |
| Which one is the rarest set?
6223813
6223814
6223815
Lego House Grand Opening
Lego House Pre Opening Fan Set
Lego House Employee Gift
LBR Shimao
LBR London
Thank you
Manu
|
|
Author: | Hexy | Posted: | Mar 4, 2021 03:29 | Subject: | When does Scala become Scala | Viewed: | 71 times | Topic: | Catalog | Status: | Open | |
| Hello,
Does anyone know when a scala piece goes in the scala category
for example a piece like this
is listed in the dish category, however, has scala in its name. I understand
that this piece does come in other sets as well. Is that the reason this piece
doesn't come in the scala category?
Any help would be appreciated
Regards,
Theo - The_RealRedHex
|
Author: | Mirko8710 | Posted: | Mar 3, 2021 19:22 | Subject: | sh693 | Viewed: | 86 times | Topic: | Catalog | Status: | Open | |
| Hi all,
according to instructions this minifigure was assembled wrong. It need to be
build with trans clear head instead of light nougat one.
Cheers,
Mirko
|
|
|
Author: | Kenopolis | Posted: | Mar 3, 2021 13:28 | Subject: | Please clarify similar torsos | Viewed: | 70 times | Topic: | Catalog | Status: | Open | |
| There are two torsos that are very similar, and could very easily be mistaken
for each other. 973pb1563 and 973pb0504.
Could you please make a "this item is similar to" note to them?
Also the name for the first could be changed to make it more clear.
It currently says with dark tan undershirt, or White undershirt. Honestly, it's
hard to tell the colors apart here. The real difference is that one has a printed
vest (arm holes for vest) and the other does not. The printed folds in the cloth
are also slightly different.
973pb1563 add the words, "with vest pattern"
973pb0504 keep the same
Thanks!
|
Author: | maxx3001 | Posted: | Mar 3, 2021 05:20 | Subject: | Two colors chains? | Viewed: | 83 times | Topic: | Catalog | Status: | Open | |
| I have this torso
Most are golden like in the picture, but a few are more reddish gold.
Is this a normal variation?
Thanks,
Maxx
|
Author: | Predatedcow | Posted: | Mar 2, 2021 23:45 | Subject: | TRUKAYAK | Viewed: | 93 times | Topic: | Catalog | Status: | Open | |
| Hey, I’m trying to list the 2015 Toys r Us TRUKAYAK kayak and I can’t find it
in the catalogue. Could someone point me in the right direction? Found a discussion
forum from 2018 which seemed to suggest that BrickLink was adding these types
of exclusive sets to the site so maybe I’m missing it.
|
Author: | yorbrick | Posted: | Mar 1, 2021 08:12 | Subject: | Misleading product images | Viewed: | 149 times | Topic: | Catalog | Status: | Open | |
| The beatbox contents images are misleading.
and so on.
These sets contain 16 tiles, 14 of which are random. Shouldn't the random
ones have been blurred out so as not to mislead buyers.
|
Author: | Andrsv | Posted: | Mar 1, 2021 03:22 | Subject: | Glued Torso and pants | Viewed: | 96 times | Topic: | Catalog | Status: | Open | |
| I noticed a store who is selling Torso's as NEW with description "pants are
glued to Torso".
I checked the same Torso from other sellers, and no other described it as glued
with pants.
Are Torso's and pants sometimes factory glued without the rest of the minifig
parts also glued?
|
|
Author: | kuschelig | Posted: | Feb 28, 2021 12:30 | Subject: | Mini Doll Torso Colors | Viewed: | 52 times | Topic: | Catalog | Status: | Open | |
| A quick search did not show any results on this topic before...
Is it possible to change how mini doll torsos are identified by color in the
search function? Rather than skin color, it would be better to have them sorted
by shirt/clothing.
Currently there are 5 pages of light nougat, 2 pages of medium nougat and not
much else.
Trying to identify Friends figures now is very tedious and time consuming with
the current classification. It would be much easier to select mini doll torso
and then "dark pink" for color and end up with perhaps 10-20 choices rather than
236
|
|
Author: | Hexy | Posted: | Feb 27, 2021 17:39 | Subject: | Duplo Mushroom | Viewed: | 91 times | Topic: | Catalog | Status: | Open | |
| Hello,
A while ago my change for
Was rejected.
I requested to change the name to Duplo Plant Mushroom...Etc. And I'm not
sure why it was rejected; all others in the Duplo plant category have Duplo plant
in the name.
Anyone got an idea of why it was rejected or should I request it again.
All help is appreciated
Kind Regards,
Theo - The_RealRedHex
|
|
Author: | platinum_lego | Posted: | Feb 27, 2021 05:06 | Subject: | Set 21016 Sungnyemun/Namdaemun tile | Viewed: | 39 times | Topic: | Catalog | Status: | Open | |
| Hi all,
The picture of
shows an image of the built set. Strangely enough, the printed tile says "Namdaemun"
while the inventory (and the two pictures of the box and instructions) indicate
the printed tile says "Sungnyemun".
Based on the above picture it appears the Namdaemun tile does exist, but can
anyone confirm this with a physical Lego part? Was this printed tile only available
in sets purchased in South Korea?
Just a bit curious...
Steve
|
|
Author: | Stevoland | Posted: | Feb 27, 2021 03:23 | Subject: | Shanghai disneytown 1st anniversary box sets | Viewed: | 79 times | Topic: | Catalog | Status: | Open | |
| Looking for info about the Shanghai Disneytown 1st Anniversary minifigure box
sets with passport. Only 333 released with 3 seperate minifig in each box. I
want to catalogue but can’t find any info on set numbers or value. Can anyone
help??
|
Author: | Teup | Posted: | Feb 24, 2021 12:46 | Subject: | Wheel? | Viewed: | 121 times | Topic: | Catalog | Status: | Open | |
| Was searching my train department upside down for this part...
But I see it is in "Wheel"... is this a mistake? Since, well, it clearly is not
a wheel
|
Author: | Leftoverbricks | Posted: | Feb 22, 2021 11:39 | Subject: | Changing old minifig pics? | Viewed: | 103 times | Topic: | Catalog | Status: | Open | |
| There are many old minifig pics in the catalog. Made with 2010 digital cameras
or so.
So I wonder: does it make sense to update those old - and often not so very clear
- pictures with newer ones?
I understand that the first person who submits the picture receives the credit
for the picture, so this might be a sensitive area.
Today I scanned
with my Instabrick. With very minor modifications the result is the attached
picture.
Personally I think this is a better picture than the one currently in the catalog.
What do you think?
|
|
|
Author: | wjbarker | Posted: | Feb 22, 2021 10:34 | Subject: | Set #21120 | Viewed: | 81 times | Topic: | Catalog | Status: | Open | |
| Hi there,
Part #3070bpb085 is listed in Set #21120 as an Extra item, but is not listed
as a Regular Item. It is a regular item in the Instructions Entry, so it seems
like this should be a Regular item in the set.
Thanks for the amazing site!
|
Author: | Iliketurtles1 | Posted: | Feb 22, 2021 08:23 | Subject: | Mushrooms In Super Mario | Viewed: | 96 times | Topic: | Catalog | Status: | Open | |
| Why are the mushrooms not considered figures? They are considered figures in
the character packs.
|
|
Author: | platinum_lego | Posted: | Feb 22, 2021 06:39 | Subject: | 40450 Amelia Earhart - add to catalog?? | Viewed: | 174 times | Topic: | Catalog | Status: | Open | |
| Hi all,
I was just wondering what the deal is with adding a new set to the catalog.
After visiting a Lego certified store today I received the 40450 Amelia Earhart
tribute set, which will be available from February 22 until stocks last. As far
as I can tell, this set has not been submitted to the catalog and no pending
details are available.
Can I add this set to the catalog?
Thanks,
Steve
|
|
Author: | BrickBros20 | Posted: | Feb 21, 2021 16:36 | Subject: | Checking a Wanted List Against an Inventory? | Viewed: | 46 times | Topic: | Catalog | Status: | Open | |
| Hello!
I know I can check a wanted list against what I currently have listed in my store,
but is there a way to do that same thing in my stores inventory?
Thanks!
~Brick Brothers
|
|
Author: | hpoort | Posted: | Feb 21, 2021 12:43 | Subject: | Mini doll torso shapes | Viewed: | 105 times | Topic: | Catalog | Status: | Open | |
| Sorting through my collection of mini doll torso's, I noticed the variety
of body shapes: I found 4 distinct shapes for boy, girl, man and woman. It seems
LDraw does distinguish these 4 shapes, but Bricklink only distinguishes the two
(?) FTFpb000c00 and FTMpb000c00
Could this be a catalog project to renumber the parts and distinguish the shapes
properly? Should we renumber as FTM, FTW, FTB, FTG (Friends Torso Man/Woman/Boy/Girl)?
Man (LDraw 92242):
* | | FTMpb001c01 Torso Mini Doll Man White Shirt Top with Open Collar, Reddish Brown Tie Pattern, Light Nougat Arms with Hands with White Sleeves Parts: Mini Doll, Torso |
shoulder width 10.2 mm, breast thickness 6.6 mm
Woman (LDraw 92243):
[p=FTFpb014c01]
shoulder width 8.8 mm, breast thickness 6.9 mm
Boy (LDraw u9210):
[p=FTMpb002c01]
shoulder width 8.8 mm, breast thickness 5.5 mm
Girl (LDraw 92241):
[p=FTFpb224c01]
shoulder width 8.8 mm, breast thickness 6.0 mm
|
|
Author: | normann1974 | Posted: | Feb 18, 2021 07:39 | Subject: | Bar 4L length | Viewed: | 105 times | Topic: | Catalog | Status: | Open | |
| I just noticed one Bar 4L that was clearly shorter (~½ mm) than the other. It
has a LEGO logo on it, so it's genuine. Has anyone else seen this?
/Jan
|
|
Author: | CPgolfaddict | Posted: | Feb 16, 2021 21:38 | Subject: | Misprint / Missed Print | Viewed: | 128 times | Topic: | Catalog | Status: | Open | |
| It seems clear the one on the left simply skipped part of the printing process
and should not be a new decorated cone.
Although I found multiples with the same error....
|
|
Author: | minifigmountain | Posted: | Feb 16, 2021 13:49 | Subject: | Photos for col334 face mask | Viewed: | 117 times | Topic: | Catalog | Status: | Open | |
| If you go to col334 - War Machine and look at photo #1 the very bottom of the
mask below the lip has silver on the center section. Almost looks like a sideways
axe head. Photo #2 shows that everything below the lip is just black.
Is one of them correct or are both valid? Does #2 have the silver worn off? I
find it hard to believe an official catalog photo would be approved with a defect.
For the record, my col334 looks like photo #2 and I want to know if that means
it's worn. It is supposedly brand new thus my concern.
Thanks!
|
|
Author: | Dixi78 | Posted: | Feb 15, 2021 15:51 | Subject: | Distinctive? | Viewed: | 105 times | Topic: | Catalog | Status: | Open | |
| Hi,
I'm adding some counterparts (stickered parts) for the set 60183.
One of the items is a slope with Red and White Danger Stripes Thick Pattern.
See attached picture.
I found a similar item from another set in the catalog:
It's almost the same, the difference is the white dot in de lower left corner.
Should I add 'my' part as a new part or can I consider these items the
same?
And if it's distinctive, what name should I give it?
I'd like to hear your opinion!
|
|
Author: | runner.caller | Posted: | Feb 15, 2021 14:43 | Subject: | Elastigirl | Viewed: | 123 times | Topic: | Catalog | Status: | Open | |
|
Any reason this minifig is only named "Elastigirl" when she's wearing the
Mrs. Incredible outfit?
|
|
Author: | Admin_Russell | Posted: | Feb 15, 2021 12:36 | Subject: | Some sad news | Viewed: | 456 times | Topic: | Catalog | Status: | Open | |
| Dear BrickLink members,
On Friday we heard from Hygrotus, currently our longest serving catalog admin,
that he was relinquishing his position. This is for sure a setback for our team,
as he was an unequalled expert in many areas and was exceptionally diligent and
careful in his work.
We will certainly miss him, and we wish him the best for the future. You can
read his BrickLink story here:
https://www.bricklink.com/message.asp?ID=1249971
The CEP admin page is not updated yet with this new information. We hope to finish
that by the end of the week.
As part of the regular course of building the Community Expert catalog admin
program, we were planning to add another admin to the team this Spring (Apr/May).
That continues to be our plan.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|