Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | normann1974  | | Posted: | Apr 7, 2021 16:09 | | Subject: | Inventory Change Request for Set 10274-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {2458 Brick, Modified 1 x 2 with Pin to 44865 Brick, Modified 1 x 2 with Pin and Bottom Stud Holder}
Comments from Submitter:
I someone can confirm that the old variant came in this set, feel free to add it as an alternate. My set came with this new mold, and BL hans't identified it until now.
|
| Author: | tpr | | Posted: | Apr 7, 2021 14:53 | | Subject: | Chrome Silver Legs - confirmation | | Viewed: | 111 times | | Topic: | Catalog | | Status: | Open | |
| Hi
Can anyone confirm the base colour of the Hips and Legs that are Chrome Silver
Thanks
tpr
|
 |
| Author: | 7StarMantis | | Posted: | Apr 7, 2021 13:57 | | Subject: | Rare Very Light Blue Gray in Set 10698-1 | | Viewed: | 114 times | | Topic: | Colors | | Status: | Open | |
| I found that the four 3005 light gray blocks in set 10698-1 that I got are unusually
light when compared to other blocks of supposedly the same color. The manual
lists these as the same as the other bricks in the set, but this is not the case.
In the photo I have attached, the window piece also came with the set. I have
attached other bricks for comparison as well.
I am not sure if this is intentional or a color error at the manufacturing plant,
but these bricks are lighter than the standard light blue gray.
This brick sells for $5 a piece for some reason in the color very light blue
gray. The current set inventory on here does not reflect the lighter color.
|
|
|
| Author: | randyf | | Posted: | Apr 7, 2021 11:30 | | Subject: | Inventory Change Request for Set 6837-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {6048 Arm Piece with Pin, 2 Fingers to 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
| Author: | msSquirrel | | Posted: | Apr 7, 2021 07:34 | | Subject: | Inventory Change Request for Set 9217-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 9 Part 76371 Red Duplo, Brick 1 x 2 x 2 with Bottom Tube (Alternate)
Comments from Submitter:
sealed set content
|
| Author: | axaday | | Posted: | Apr 7, 2021 05:40 | | Subject: | Inventory Change Request for Set 9794-3 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {6048 Arm Piece with Pin, 2 Fingers to 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves}
* Change 2 Part Black {4085b Plate, Modified 1 x 1 with U Clip Thin (Vertical Grip) to 4085c Plate, Modified 1 x 1 with U Clip Thick (Vertical Grip)}
Comments from Submitter:
Both of Jonas' notes on this set turned out right.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 23:53 | | Subject: | Inventory Change Request for Set 5972-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 23:40 | | Subject: | Inventory Change Request for Set 5971-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Yellow {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 23:29 | | Subject: | Inventory Change Request for Set 8091-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 3 Part Dark Red {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End and 9 Teeth with Bottom Groove}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 23:20 | | Subject: | Inventory Change Request for Set 7312-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 3 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 22:11 | | Subject: | Inventory Change Request for Set 6239-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Red {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 21:42 | | Subject: | Inventory Change Request for Set 6873-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Bottom Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | SezaR | | Posted: | Apr 6, 2021 16:25 | | Subject: | Inventory Change Request for Set 7862-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part x466 Light Gray Electric, Wire & Connector 12V / 4.5V with two Leads, unspecified length
* Delete 2 Part bb0081c01 Light Gray Electric, Wire & Connector Part 2-Way Male Squared Narrow Long without Center Post
* Change 1 Part Light Gray 766c190 Electric, Wire & Connector 12V / 4.5V with two 2-prong connectors, 190 Studs Long {Counterpart to Regular}
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 15:53 | | Subject: | Inventory Change Request for Set 3807-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3713 Black Technic Bush (Extra)
* Add 1 Part 32062 Black Technic, Axle 2 Notched (Extra)
* Add 1 Part 6628b Black Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots (Extra)
* Add 1 Part 32002 Dark Gray Technic, Pin 3/4 (Extra)
* Add 1 Part 3713 Light Gray Technic Bush (Extra)
* Add 1 Part 4265c Light Gray Technic Bush 1/2 Smooth (Extra)
* Add 1 Part 4274 Light Gray Technic, Pin 1/2 (Extra)
* Add 1 Part 3673 Light Gray Technic, Pin without Friction Ridges Lengthwise (Extra)
* Change {3 to 2} Part Black 3713 Technic Bush
* Change {21 to 20} Part Black 32062 Technic, Axle 2 Notched
* Change {3 to 2} Part Black 6628b Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Squared Pin Hole
* Change {17 to 16} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise, Staggered, with or without Center Slots
* Change {3 to 2} Part Dark Gray 32002 Technic, Pin 3/4
* Change {3 to 2} Part Light Gray 3713 Technic Bush
* Change {7 to 6} Part Light Gray 4265c Technic Bush 1/2 Smooth
* Change {3 to 2} Part Light Gray 4274 Technic, Pin 1/2
* Change {7 to 6} Part Light Gray 3673 Technic, Pin without Friction Ridges Lengthwise
Comments from Submitter:
Breaking out extra arts according to the analysis here: https://www.bricklink.com/message.asp?ID=1264022
|
|
| Author: | razorflan | | Posted: | Apr 6, 2021 14:28 | | Subject: | Sticker part 2335pb164 sticker orientation | | Viewed: | 54 times | | Topic: | Catalog | | Status: | Open | |
| Set 70906 part 2335pb164 the sticker in the image for this part is applied incorectly.
Just check the image for set 70906 clips are at the top 'bang' 😲
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 13:50 | | Subject: | Inventory Change Request for Set 75038-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 6 Part 44567a Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove (match ID 3)
* Change 6 Part Light Bluish Gray 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove {Regular to Alternate} {match ID 0 to 3}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | Turez | | Posted: | Apr 6, 2021 12:19 | | Subject: | Inventory Change Request for Set 10271-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Dark Tan to Medium Nougat} 87079pb904 Tile 2 x 4 with French and Danish Emblem, Black 'DANMARK', 'D' and Eiffel Tower Pattern (Sticker) - Set 10271 (Counterpart)
* Change 1 Part {Dark Tan to Medium Nougat} 87079pb903 Tile 2 x 4 with Heart Shaped Italian and Polish Flag and 'PL' Pattern (Sticker) - Set 10271 (Counterpart)
* Change 1 Part {Dark Tan to Medium Nougat} 87079pb902 Tile 2 x 4 with Swedish and Swiss Emblem and Black 'SWEDEN' Pattern (Sticker) - Set 10271 (Counterpart)
|
|
| Author: | samsam2 | | Posted: | Apr 6, 2021 10:24 | | Subject: | Inventory Change Request for Set 70355-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove}
|
|
| Author: | DanielBuyBricks | | Posted: | Apr 6, 2021 03:55 | | Subject: | Inventory Change Request for Set 8987-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part {Flat Silver to Pearl Light Gray} 64308 Bionicle Weapon Vapor Trident
Comments from Submitter:
Color should be Pearl Light Gray and NOT Flat Silver. All pieces with silver from set on right side, and an assortment of Flat Silver pieces on left side for verification.
https://imgur.com/0jUEwM7
|
|
|
| Author: | Admin_Russell | | Posted: | Apr 6, 2021 01:30 | | Subject: | New Packing Dimensions Feature | | Viewed: | 321 times | | Topic: | Catalog | | Status: | Open | |
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
|
| Author: | samsam2 | | Posted: | Apr 6, 2021 00:42 | | Subject: | Inventory Change Request for Set 70314-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
sealed set unboxing Flickr https://www.flickr.com/photos/98579374@N03/albums/72157665707429491
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 00:32 | | Subject: | Inventory Change Request for Set 8089-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
| Author: | samsam2 | | Posted: | Apr 6, 2021 00:25 | | Subject: | Inventory Change Request for Set 41577-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
sealed set, picture to follow
|
|
| Author: | randyf | | Posted: | Apr 6, 2021 00:12 | | Subject: | Inventory Change Request for Set 3557-1 | | Viewed: | 14 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
