Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | samsam2 | Posted: | Apr 6, 2021 10:24 | Subject: | Inventory Change Request for Set 70355-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove}
|
|
Author: | tec | Posted: | Apr 6, 2021 10:00 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 49 times | Topic: | Catalog | |
| Ok I tested it for a bit. I added 20 things, bricks from disparate themes, even
a power transformator id 70928.
I think the new page is good. I can add stud- and packing-dimensions at the same
time. There is some error checking on our measures, preventing blunders. Zero
is allowed, we can use that with multiple meanings, better to give us guidance
maybe?
We disperately need the search engine now.
I spent hundreds of clicks just to find parts needing a caliper job. I won't
do that again (note: I'm not seller so can't fiddle with that famous
flag)
|
Author: | calsbricks | Posted: | Apr 6, 2021 09:57 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 63 times | Topic: | Catalog | |
| In Catalog, jennnifer writes:
| In Catalog, tec writes:
| My friend here likes this post
|
That's a beauty! I definitely need one of those.
Jen
|
Or you might want one of these
|
|
|
Author: | Vosblokjes | Posted: | Apr 6, 2021 09:53 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 51 times | Topic: | Catalog | |
| In Catalog, axaday writes:
| Good progress. The big splash will be when we can search our inventory for pieces
missing packing dimensions.
In Catalog, Admin_Russell writes:
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
All, please note that the dimensions you fill in are CM (not MM), I now see very
large items coming up.
https://www.bricklink.com/v2/catalog/catalogitem.page?P=87079pb912#T=C&C=110
for example. It is a 2x4 tile, but now has dimensions "Pack. Dim.: 16 x 32 x
3 cm"
|
|
Author: | Brick.Door | Posted: | Apr 6, 2021 09:29 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 53 times | Topic: | Catalog | |
| How will this be used? Will we be able to set up a shipping method that is only
allowed if all pieces are under a certain thickness? (i.i USPS large envelope/flat)
So the checkout would need to find the smallest of the three dimensions for each
element in the cart, and make sure it is below the threshold.
Or is it just to better approximate the total volume of the order?
|
Author: | jennnifer | Posted: | Apr 6, 2021 09:10 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 51 times | Topic: | Catalog | |
| In Catalog, tec writes:
| My friend here likes this post
|
That's a beauty! I definitely need one of those.
Jen
|
|
Author: | axaday | Posted: | Apr 6, 2021 07:42 | Subject: | Re: Inventory Change Request for Set 9794-3 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
| I would guess
[p=6048]
is in fact
* | | 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves Parts: Arm |
|
The inventory has been pending for some time, but I believe I remember checking
that. I will check again this evening.
| ----------------
And did your set really come with
?
That would be very unusal for a set from 2004. Maybe it is a later copy, but
then I would expect it to be the 2005 version.
|
I will double check that for you also. But you might note that the 2004 and
2005 sets were both added to the catalog by me. This inventory for the 2004
set was built from the same 2004 set I bought to create the set listing in the
first place.
|
|
Author: | Turez | Posted: | Apr 6, 2021 07:08 | Subject: | Re: Inventory Change Request for Set 9794-3 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 2 Part White {4032 Plate, Round 2 x 2 with Axle Hole to 4032b Plate, Round 2 x 2 with Axle Hole (x Shape)}
Comments from Submitter:
Sorting my set out, I found this error in the inventory build.
|
I would guess
[p=6048]
is in fact
* | | 6048b Arm Piece with Pin, 2 Fingers and Finger Grooves Parts: Arm |
----------------
And did your set really come with
?
That would be very unusal for a set from 2004. Maybe it is a later copy, but
then I would expect it to be the 2005 version.
|
|
Author: | tec | Posted: | Apr 6, 2021 07:07 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 70 times | Topic: | Catalog | |
| My friend here likes this post |
|
|
Author: | axaday | Posted: | Apr 6, 2021 06:01 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 56 times | Topic: | Catalog | |
| Good progress. The big splash will be when we can search our inventory for pieces
missing packing dimensions.
In Catalog, Admin_Russell writes:
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
|
Author: | Mr_Rofl | Posted: | Apr 6, 2021 04:06 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 58 times | Topic: | Catalog | |
| Finally!
A few questions about this feature.
Are the dimensions also available in the API? Or do we need to scrape the from
the different pages?
Does IC still use the 0 and ? as 0 (zero)thickness or will this be an manual
invoice type only?
In Catalog, Admin_Russell writes:
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
|
Author: | yorbrick | Posted: | Apr 6, 2021 03:59 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 52 times | Topic: | Catalog | |
| In Catalog, Admin_Russell writes:
| In Catalog, yorbrick writes:
| Just to note, you have snipped the image starting with the 2x4 brick but not
included its dimensions. I got confused with the first set of dimensions x, y
and z until I realised they are for the slope and not the brick.
|
Sorry about that. Here is another screenshot:
|
There is also a typo on the hell page for the flattened tractor box. It should
be 0.2cm not 0.02cm.
|
|
Author: | DanielBuyBricks | Posted: | Apr 6, 2021 03:55 | Subject: | Inventory Change Request for Set 8987-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part {Flat Silver to Pearl Light Gray} 64308 Bionicle Weapon Vapor Trident
Comments from Submitter:
Color should be Pearl Light Gray and NOT Flat Silver. All pieces with silver from set on right side, and an assortment of Flat Silver pieces on left side for verification.
https://imgur.com/0jUEwM7
|
|
Author: | Admin_Russell | Posted: | Apr 6, 2021 03:20 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 86 times | Topic: | Catalog | |
| In Catalog, yorbrick writes:
| Just to note, you have snipped the image starting with the 2x4 brick but not
included its dimensions. I got confused with the first set of dimensions x, y
and z until I realised they are for the slope and not the brick.
|
Sorry about that. Here is another screenshot:
|
|
|
Author: | yorbrick | Posted: | Apr 6, 2021 03:16 | Subject: | Re: New Packing Dimensions Feature | Viewed: | 49 times | Topic: | Catalog | |
| In Catalog, Admin_Russell writes:
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
Just to note, you have snipped the image starting with the 2x4 brick but not
included its dimensions. I got confused with the first set of dimensions x, y
and z until I realised they are for the slope and not the brick.
|
|
|
Author: | Admin_Russell | Posted: | Apr 6, 2021 01:30 | Subject: | New Packing Dimensions Feature | Viewed: | 321 times | Topic: | Catalog | Status: | Open | |
| We are pleased to announce that a major new feature was deployed to the catalog
today - Packing Dimensions!
We started a Packaging Dimensions Topic in the Forum in the Fall of 2017 so that
members could input dimensions to help Instant Checkout work properly. It was
only supposed to be a temporary solution, and it took a lot of time and dedication
for both contributors and admins to handle each request manually.
Now there is much better way - just input the data like you would any other catalog
data. Notice the upgrade to the Change Item form:
https://www.bricklink.com/catalogReq.asp?itemType=P
The first thing, though, that we want to tell you about this new feature is that
it's only a start. This is actually just phase 1 out of 3 phases. We did
it this way so we could get the basic functionality opened up as soon as possible.
This means that the Add Item form does not have Packing Dimensions input fields,
and we haven't touched the seller interface either which still shows millimeters
and only allows the upload of custom dimensions.
We are also a bit behind on the new Help Page:
https://www.bricklink.com/help.asp?helpID=2510
There are 4 areas we still need to tackle with the Help Page: Minifigures, Gear,
Books, and Catalogs. Those sections will be filled out over the next few days.
If you could please hold off on uploading dimensions for those Item Types until
the Help Pages are finished, it would be appreciated.
As you may have noticed, we changed the name from Packaging Dimensions to Packing
Dimensions. Let us know what you think and of course report any bugs. And there
is no need to post in the Packaging Dimensions Topic any more. We'll keep
it there for a while in case something happens to our new system, but when we
wrap up with phase 3, we will officially decommission that part of the Forum.
|
|
|
Author: | samsam2 | Posted: | Apr 6, 2021 00:43 | Subject: | Re: Inventory Change Request for Set 70314-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| In Inventories Requests, samsam2 writes:
| Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
sealed set unboxing Flickr https://www.flickr.com/photos/98579374@N03/albums/72157665707429491
|
|
|
|
Author: | samsam2 | Posted: | Apr 6, 2021 00:42 | Subject: | Inventory Change Request for Set 70314-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
sealed set unboxing Flickr https://www.flickr.com/photos/98579374@N03/albums/72157665707429491
|
|
Author: | randyf | Posted: | Apr 6, 2021 00:32 | Subject: | Inventory Change Request for Set 8089-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {4623 Plate, Modified 1 x 2 with Bar Arm Up (Undetermined Horizontal Arm Length) to 4623a Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 6mm)}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
Author: | samsam2 | Posted: | Apr 6, 2021 00:28 | Subject: | Re: Inventory Change Request for Set 41577-1 | Viewed: | 12 times | Topic: | Inventories Requests | |
| In Inventories Requests, samsam2 writes:
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
sealed set, picture to follow
|
|
|
|
Author: | samsam2 | Posted: | Apr 6, 2021 00:25 | Subject: | Inventory Change Request for Set 41577-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
sealed set, picture to follow
|
|
Author: | randyf | Posted: | Apr 6, 2021 00:12 | Subject: | Inventory Change Request for Set 3557-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
|
Author: | randyf | Posted: | Apr 6, 2021 00:02 | Subject: | Inventory Change Request for Set 3558-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {6628 Technic, Pin with Friction Ridges Lengthwise and Tow Ball (Undetermined Hole Type) to 6628a Technic, Pin with Friction Ridges Lengthwise and Tow Ball with Round Pin Hole}
Comments from Submitter:
From my personal collection. The set was bought new and never mixed with other sets.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|