Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Mirko8710  | | Posted: | Mar 13, 2021 13:04 | | Subject: | Venom from 242104-1 | | Viewed: | 76 times | | Topic: | Catalog | | Status: | Open | |
| Hi guys,
Venom added to the inventory of the set is wrong:
According to instruction we need to add the neck bracket and then the appendices
as all the others Venom or Carnage or Batman with jetpacks.
I have already uploaded sh690 and its picture.
I have already request also an inventory change.
Regards,
Mirko
|
 |
| Author: | Bricklanta | | Posted: | Mar 12, 2021 09:38 | | Subject: | Problem with 40243c01 as c'part in 4706-1? | | Viewed: | 40 times | | Topic: | Catalog | | Status: | Open | |
| I'm looking at set 4706-1 (Harry Potter - Forbidden Corridor). In the inventory
are stair components, including Light Gray steps (16x 40243) and a Black support
(1x 40244)
In counterparts, this set uses 40243c01 (Stairs Spiral Steps 16 with Support),
but that assembly calls for matching support and stairs color. This assembly
is used in 4 sets, one with LBG steps and 3 with LG steps.
However two of these use a Black support and two of them use a Tan support.
I believe following the standard of Hips & Legs parts, there should be two distinct
assemblies - 40243c01 - Stairs Spiral Steps 16 with Black Support and 40243c02
- Stairs Spiral Steps 16 with Tan Support
Am I reading this correctly?
Thank you!
|
|
| Author: | Squirrelbnct | | Posted: | Mar 10, 2021 16:28 | | Subject: | 5372 - Skeleton Chariot | | Viewed: | 101 times | | Topic: | Catalog | | Status: | Open | |
| Has somebody any idea why it is not possible to put Set 5372 on a wanted list
or inventory?
|
| Author: | CanadaFirst | | Posted: | Mar 10, 2021 10:09 | | Subject: | 21763c01 | | Viewed: | 48 times | | Topic: | Catalog | | Status: | Open | |
| Another question, trying to get the hang of this...
I just created 21763a and 21763b which are the two parts of 21763c01 and they
were approved.
First thing, the parts do not appear in a search for the item numbers but are
there in the catalog under plastic. Is this something that will be resolved on
its own with time or did I do something wrong?
Also, I noticed that 21763c01 exists as color not applicable and as red but that
the photo was only on not applicable which makes me think that it's the correct
way to list it.
Should we list and/or create plastic parts as not applicable or as their color?
|
|
| Author: | roguemjr | | Posted: | Mar 9, 2021 15:48 | | Subject: | Do Samsonite LEGO sets count here? | | Viewed: | 130 times | | Topic: | Catalog | | Status: | Open | |
| One of my uncles was at a garage/estate sale some 20 years ago and found 2 "sealed"
of the attached samsonite LEGO sets. I say sealed because they are just closed
ends with nothing that really seals them. I did open to verify their contents
as gently as I could. Are these considered sale-able LEGO sets here? The set
number is listed as 216 for white bricks in various sizes. Its dimensions are
approximately 3in x 4in x 1in.
Best Regards,
Michael
|
|
| Author: | CanadaFirst | | Posted: | Mar 9, 2021 13:04 | | Subject: | Relationships | | Viewed: | 120 times | | Topic: | Catalog | | Status: | Open | |
| Hi!
I just created a door and it was approved.
How do I add this part:
I know it's a relationship but I want to do it correctly and I'm not
sure what relationship to select, I don't see a place to select 'window,
glass & shutter'
|
|
| Author: | CanadaFirst | | Posted: | Mar 8, 2021 14:26 | | Subject: | 7049b without holes | | Viewed: | 93 times | | Topic: | Catalog | | Status: | Open | |
| While preparing some used bricks for listing we came across something we had
never seen before, a 7049b with no holes.
Should it be listed as a custom item, as a 7049b with a note on it?
I imagine that this is a rather uncommon item that could interest a collector
of oddities so it would sell for quite a bit more than a normal one.
Any help with listing such a strange item would be appreciated.
|
|
| Author: | jviney | | Posted: | Mar 7, 2021 19:29 | | Subject: | complete Lego catalog | | Viewed: | 99 times | | Topic: | Catalog | | Status: | Open | |
| | Is there a complete Lego catalog A-Z that can be printed out? |
| Author: | atkk | | Posted: | Mar 7, 2021 10:44 | | Subject: | Leg and torso dimensions | | Viewed: | 39 times | | Topic: | Catalog | | Status: | Open | |
| Why are there no dimensions for torsos and leg assemblies in the catalog?
I think this is messing up instant checkout options, since without dimensions,
lettermail probably does not appear in shipping choices.
|
| Author: | WhiteVanMan | | Posted: | Mar 7, 2021 08:45 | | Subject: | Changing the release date of an item | | Viewed: | 82 times | | Topic: | Catalog | | Status: | Open | |
| Hello Admins (Stormchaser?)
I've been listing several minifig components within my store, and I noticed
that for this item
It's listed to have been released in 2014
I've got one with the 2012 date.
Can this be rectified?
Mine is Flat Silver.
Regards,
Paul
(Also, please check out my other catalogue suggestion?)
|
|
| Author: | zorbanj | | Posted: | Mar 6, 2021 17:24 | | Subject: | Set 4748 Ogel's Mountain Fortress Grays | | Viewed: | 70 times | | Topic: | Catalog | | Status: | Open | |
| I recently bought set 4748, used and incomplete. I went through the pieces and
there was a mixture of light gray and light bluish gray pieces. All of these
pieces were part of the set.
Not sure if the set came this way or if pieces were added afterwards.
Does anyone know if this set was released with a mixture of both light and bluish
gray pieces?
|
|
| Author: | Heartbricker | | Posted: | Mar 6, 2021 11:38 | | Subject: | Pneumatic Hoses- same size, different part # | | Viewed: | 70 times | | Topic: | Catalog | | Status: | Open | |
| We're in the middle of parting out 4 copies of the 8110 unimog and have an
issue we're hoping to get help on:
- Part number 5102c03 From set#8110 and part# 21761 from 42043 are the exact
same size and color, we see no difference yet they are listed under 2 part numbers
yet not mention in the listing about them being alternates.
There are other hoses with the same issue:
5102c10 and 21767 the only difference in the listing is one states 8cm and the
other is 80mm which is the same length.
Is this a catalog issue or are we missing something?
TIA
|
|
| Author: | Trusconi | | Posted: | Mar 6, 2021 02:52 | | Subject: | Which one (of these) is the rarest set? | | Viewed: | 92 times | | Topic: | Catalog | | Status: | Open | |
| Which one is the rarest set?
6223813
6223814
6223815
Lego House Grand Opening
Lego House Pre Opening Fan Set
Lego House Employee Gift
LBR Shimao
LBR London
Thank you
Manu
|
|
| Author: | Hexy | | Posted: | Mar 4, 2021 03:29 | | Subject: | When does Scala become Scala | | Viewed: | 71 times | | Topic: | Catalog | | Status: | Open | |
| Hello,
Does anyone know when a scala piece goes in the scala category
for example a piece like this
is listed in the dish category, however, has scala in its name. I understand
that this piece does come in other sets as well. Is that the reason this piece
doesn't come in the scala category?
Any help would be appreciated
Regards,
Theo - The_RealRedHex
|
| Author: | Mirko8710 | | Posted: | Mar 3, 2021 19:22 | | Subject: | sh693 | | Viewed: | 86 times | | Topic: | Catalog | | Status: | Open | |
| Hi all,
according to instructions this minifigure was assembled wrong. It need to be
build with trans clear head instead of light nougat one.
Cheers,
Mirko
|
|
|
| Author: | Kenopolis | | Posted: | Mar 3, 2021 13:28 | | Subject: | Please clarify similar torsos | | Viewed: | 70 times | | Topic: | Catalog | | Status: | Open | |
| There are two torsos that are very similar, and could very easily be mistaken
for each other. 973pb1563 and 973pb0504.
Could you please make a "this item is similar to" note to them?
Also the name for the first could be changed to make it more clear.
It currently says with dark tan undershirt, or White undershirt. Honestly, it's
hard to tell the colors apart here. The real difference is that one has a printed
vest (arm holes for vest) and the other does not. The printed folds in the cloth
are also slightly different.
973pb1563 add the words, "with vest pattern"
973pb0504 keep the same
Thanks!
|
| Author: | maxx3001 | | Posted: | Mar 3, 2021 05:20 | | Subject: | Two colors chains? | | Viewed: | 83 times | | Topic: | Catalog | | Status: | Open | |
| I have this torso
Most are golden like in the picture, but a few are more reddish gold.
Is this a normal variation?
Thanks,
Maxx
|
| Author: | Predatedcow | | Posted: | Mar 2, 2021 23:45 | | Subject: | TRUKAYAK | | Viewed: | 93 times | | Topic: | Catalog | | Status: | Open | |
| Hey, I’m trying to list the 2015 Toys r Us TRUKAYAK kayak and I can’t find it
in the catalogue. Could someone point me in the right direction? Found a discussion
forum from 2018 which seemed to suggest that BrickLink was adding these types
of exclusive sets to the site so maybe I’m missing it.
|
| Author: | yorbrick | | Posted: | Mar 1, 2021 08:12 | | Subject: | Misleading product images | | Viewed: | 149 times | | Topic: | Catalog | | Status: | Open | |
| The beatbox contents images are misleading.
and so on.
These sets contain 16 tiles, 14 of which are random. Shouldn't the random
ones have been blurred out so as not to mislead buyers.
|
| Author: | Andrsv | | Posted: | Mar 1, 2021 03:22 | | Subject: | Glued Torso and pants | | Viewed: | 96 times | | Topic: | Catalog | | Status: | Open | |
| I noticed a store who is selling Torso's as NEW with description "pants are
glued to Torso".
I checked the same Torso from other sellers, and no other described it as glued
with pants.
Are Torso's and pants sometimes factory glued without the rest of the minifig
parts also glued?
|
|
| Author: | kuschelig | | Posted: | Feb 28, 2021 12:30 | | Subject: | Mini Doll Torso Colors | | Viewed: | 52 times | | Topic: | Catalog | | Status: | Open | |
| A quick search did not show any results on this topic before...
Is it possible to change how mini doll torsos are identified by color in the
search function? Rather than skin color, it would be better to have them sorted
by shirt/clothing.
Currently there are 5 pages of light nougat, 2 pages of medium nougat and not
much else.
Trying to identify Friends figures now is very tedious and time consuming with
the current classification. It would be much easier to select mini doll torso
and then "dark pink" for color and end up with perhaps 10-20 choices rather than
236
|
|
| Author: | Hexy | | Posted: | Feb 27, 2021 17:39 | | Subject: | Duplo Mushroom | | Viewed: | 91 times | | Topic: | Catalog | | Status: | Open | |
| Hello,
A while ago my change for
Was rejected.
I requested to change the name to Duplo Plant Mushroom...Etc. And I'm not
sure why it was rejected; all others in the Duplo plant category have Duplo plant
in the name.
Anyone got an idea of why it was rejected or should I request it again.
All help is appreciated
Kind Regards,
Theo - The_RealRedHex
|
|
| Author: | platinum_lego | | Posted: | Feb 27, 2021 05:06 | | Subject: | Set 21016 Sungnyemun/Namdaemun tile | | Viewed: | 39 times | | Topic: | Catalog | | Status: | Open | |
| Hi all,
The picture of
shows an image of the built set. Strangely enough, the printed tile says "Namdaemun"
while the inventory (and the two pictures of the box and instructions) indicate
the printed tile says "Sungnyemun".
Based on the above picture it appears the Namdaemun tile does exist, but can
anyone confirm this with a physical Lego part? Was this printed tile only available
in sets purchased in South Korea?
Just a bit curious...
Steve
|
|
| Author: | Stevoland | | Posted: | Feb 27, 2021 03:23 | | Subject: | Shanghai disneytown 1st anniversary box sets | | Viewed: | 79 times | | Topic: | Catalog | | Status: | Open | |
| Looking for info about the Shanghai Disneytown 1st Anniversary minifigure box
sets with passport. Only 333 released with 3 seperate minifig in each box. I
want to catalogue but can’t find any info on set numbers or value. Can anyone
help??
|
| Author: | Teup | | Posted: | Feb 24, 2021 12:46 | | Subject: | Wheel? | | Viewed: | 121 times | | Topic: | Catalog | | Status: | Open | |
| Was searching my train department upside down for this part...
But I see it is in "Wheel"... is this a mistake? Since, well, it clearly is not
a wheel 
|
| Author: | Leftoverbricks | | Posted: | Feb 22, 2021 11:39 | | Subject: | Changing old minifig pics? | | Viewed: | 103 times | | Topic: | Catalog | | Status: | Open | |
| There are many old minifig pics in the catalog. Made with 2010 digital cameras
or so.
So I wonder: does it make sense to update those old - and often not so very clear
- pictures with newer ones?
I understand that the first person who submits the picture receives the credit
for the picture, so this might be a sensitive area.
Today I scanned
with my Instabrick. With very minor modifications the result is the attached
picture.
Personally I think this is a better picture than the one currently in the catalog.
What do you think?
|
|
|
| Author: | wjbarker | | Posted: | Feb 22, 2021 10:34 | | Subject: | Set #21120 | | Viewed: | 81 times | | Topic: | Catalog | | Status: | Open | |
| Hi there,
Part #3070bpb085 is listed in Set #21120 as an Extra item, but is not listed
as a Regular Item. It is a regular item in the Instructions Entry, so it seems
like this should be a Regular item in the set.
Thanks for the amazing site!
|
| Author: | Iliketurtles1 | | Posted: | Feb 22, 2021 08:23 | | Subject: | Mushrooms In Super Mario | | Viewed: | 96 times | | Topic: | Catalog | | Status: | Open | |
| Why are the mushrooms not considered figures? They are considered figures in
the character packs.
|
|
| Author: | platinum_lego | | Posted: | Feb 22, 2021 06:39 | | Subject: | 40450 Amelia Earhart - add to catalog?? | | Viewed: | 174 times | | Topic: | Catalog | | Status: | Open | |
| Hi all,
I was just wondering what the deal is with adding a new set to the catalog.
After visiting a Lego certified store today I received the 40450 Amelia Earhart
tribute set, which will be available from February 22 until stocks last. As far
as I can tell, this set has not been submitted to the catalog and no pending
details are available.
Can I add this set to the catalog?
Thanks,
Steve
|
|
| Author: | BrickBros20 | | Posted: | Feb 21, 2021 16:36 | | Subject: | Checking a Wanted List Against an Inventory? | | Viewed: | 46 times | | Topic: | Catalog | | Status: | Open | |
| Hello!
I know I can check a wanted list against what I currently have listed in my store,
but is there a way to do that same thing in my stores inventory?
Thanks!
~Brick Brothers
|
|
| Author: | hpoort | | Posted: | Feb 21, 2021 12:43 | | Subject: | Mini doll torso shapes | | Viewed: | 105 times | | Topic: | Catalog | | Status: | Open | |
| Sorting through my collection of mini doll torso's, I noticed the variety
of body shapes: I found 4 distinct shapes for boy, girl, man and woman. It seems
LDraw does distinguish these 4 shapes, but Bricklink only distinguishes the two
(?) FTFpb000c00 and FTMpb000c00
Could this be a catalog project to renumber the parts and distinguish the shapes
properly? Should we renumber as FTM, FTW, FTB, FTG (Friends Torso Man/Woman/Boy/Girl)?
Man (LDraw 92242):
* | | FTMpb001c01 Torso Mini Doll Man White Shirt Top with Open Collar, Reddish Brown Tie Pattern, Light Nougat Arms with Hands with White Sleeves
Parts: Mini Doll, Torso |
shoulder width 10.2 mm, breast thickness 6.6 mm
Woman (LDraw 92243):
[p=FTFpb014c01]
shoulder width 8.8 mm, breast thickness 6.9 mm
Boy (LDraw u9210):
[p=FTMpb002c01]
shoulder width 8.8 mm, breast thickness 5.5 mm
Girl (LDraw 92241):
[p=FTFpb224c01]
shoulder width 8.8 mm, breast thickness 6.0 mm
|
|
| Author: | normann1974 | | Posted: | Feb 18, 2021 07:39 | | Subject: | Bar 4L length | | Viewed: | 105 times | | Topic: | Catalog | | Status: | Open | |
| I just noticed one Bar 4L that was clearly shorter (~½ mm) than the other. It
has a LEGO logo on it, so it's genuine. Has anyone else seen this?
/Jan
|
|
| Author: | CPgolfaddict | | Posted: | Feb 16, 2021 21:38 | | Subject: | Misprint / Missed Print | | Viewed: | 128 times | | Topic: | Catalog | | Status: | Open | |
| It seems clear the one on the left simply skipped part of the printing process
and should not be a new decorated cone.
Although I found multiples with the same error....
|
|
| Author: | minifigmountain | | Posted: | Feb 16, 2021 13:49 | | Subject: | Photos for col334 face mask | | Viewed: | 117 times | | Topic: | Catalog | | Status: | Open | |
| If you go to col334 - War Machine and look at photo #1 the very bottom of the
mask below the lip has silver on the center section. Almost looks like a sideways
axe head. Photo #2 shows that everything below the lip is just black.
Is one of them correct or are both valid? Does #2 have the silver worn off? I
find it hard to believe an official catalog photo would be approved with a defect.
For the record, my col334 looks like photo #2 and I want to know if that means
it's worn. It is supposedly brand new thus my concern.
Thanks!
|
|
| Author: | Dixi78 | | Posted: | Feb 15, 2021 15:51 | | Subject: | Distinctive? | | Viewed: | 105 times | | Topic: | Catalog | | Status: | Open | |
| Hi,
I'm adding some counterparts (stickered parts) for the set 60183.
One of the items is a slope with Red and White Danger Stripes Thick Pattern.
See attached picture.
I found a similar item from another set in the catalog:
It's almost the same, the difference is the white dot in de lower left corner.
Should I add 'my' part as a new part or can I consider these items the
same?
And if it's distinctive, what name should I give it?
I'd like to hear your opinion!
|
|
| Author: | runner.caller | | Posted: | Feb 15, 2021 14:43 | | Subject: | Elastigirl | | Viewed: | 123 times | | Topic: | Catalog | | Status: | Open | |
|
Any reason this minifig is only named "Elastigirl" when she's wearing the
Mrs. Incredible outfit?
|
|
| Author: | Admin_Russell | | Posted: | Feb 15, 2021 12:36 | | Subject: | Some sad news | | Viewed: | 456 times | | Topic: | Catalog | | Status: | Open | |
| Dear BrickLink members,
On Friday we heard from Hygrotus, currently our longest serving catalog admin,
that he was relinquishing his position. This is for sure a setback for our team,
as he was an unequalled expert in many areas and was exceptionally diligent and
careful in his work.
We will certainly miss him, and we wish him the best for the future. You can
read his BrickLink story here:
https://www.bricklink.com/message.asp?ID=1249971
The CEP admin page is not updated yet with this new information. We hope to finish
that by the end of the week.
As part of the regular course of building the Community Expert catalog admin
program, we were planning to add another admin to the team this Spring (Apr/May).
That continues to be our plan.
|
|
| Author: | Tiggy2 | | Posted: | Feb 14, 2021 12:09 | | Subject: | Minifigures | | Viewed: | 97 times | | Topic: | Catalog | | Status: | Open | |
| Hi
Just wondering why a Minifigure I listed was deleted.
This is what it is...Dragon Knights - Knight 1, Light Gray Legs with Black Hips,
Black Chin-Guard, Quiver
This is my Comments: Excellent Condition, no splits or dents. Missing Quiver/Arrows.
Is it because I don’t have the Quiver? Can I list Minifigures if missing parts?
Thank you
|
| Author: | 1974 | | Posted: | Feb 14, 2021 10:05 | | Subject: | Set 816-1 | | Viewed: | 52 times | | Topic: | Catalog | | Status: | Open | |
| The release year is listed as 1987. However, the instruction is copyrighted in
1986 and it also appears in the large 1986 catalogue 
Cheers,
Ole
|
| Author: | joesecc | | Posted: | Feb 14, 2021 07:35 | | Subject: | part 3245cpb012 catalog information. | | Viewed: | 49 times | | Topic: | Catalog | | Status: | Open | |
| Hi,
I need some clarification for the part.
The inventory for this set indicates that it exists with the alternate part
So, should there be a catalog entry for this part with the police sticker on
it?
If so how would it be classified? Alternate part/counterpart?
Regards,
Joe
|
| Author: | Bendix | | Posted: | Feb 13, 2021 10:16 | | Subject: | Why should I... | | Viewed: | 240 times | | Topic: | Catalog | | Status: | Open | |
| | ...upload an item for the catalog - when it is deleted due to unknown reasons? |
|
| Author: | crepundi | | Posted: | Feb 13, 2021 07:19 | | Subject: | part 3010p04 entry remark | | Viewed: | 29 times | | Topic: | Catalog | | Status: | Open | |
| Hello, I don't know if this is important, but there are two different versions
of this part:
one with surface print and one with embossed print (at least in white). Maybe
this could be noted in the catalog entry.
Gisela
|
| Author: | Hexy | | Posted: | Feb 13, 2021 04:47 | | Subject: | New Lego Drowned Minifigure | | Viewed: | 143 times | | Topic: | Catalog | | Status: | Open | |
| Reaching out to those that have the new drowned Minifigure from Lego Minecraft.
Please contact me, I would like to discuss weights, pictures, dimensions, etc.
Regards,
Theo - The_RealRedHex
|
| Author: | Hexy | | Posted: | Feb 11, 2021 16:51 | | Subject: | 6H or 6L | | Viewed: | 98 times | | Topic: | Catalog | | Status: | Open | |
| I've noticed that
is the only piece that has 6H. Does anyone know the difference between a 6L and
6H?
Regards,
Theo - The_RealRedHex
|
| Author: | wolfpacklego | | Posted: | Feb 10, 2021 17:14 | | Subject: | Lego VIP Coins | | Viewed: | 120 times | | Topic: | Catalog | | Status: | Open | |
| | Lego VIP Coin Pirates #5006473 needs to be added to the catalog. |
| Author: | Bricks_NW_UK | | Posted: | Feb 9, 2021 15:12 | | Subject: | What is the number 15-02 on a Lego Piece | | Viewed: | 76 times | | Topic: | Catalog | | Status: | Open | |
| Okay, let me explain.
On any piece of lego, as well as the part number there is a second number, on
the ones I am looking at 15-05 & 12-01.
What does this refer to ? Is it a mould reference or a colour reference? If
colour where is this identified.
Thanks
Steve
|
| Author: | allerhandgwand | | Posted: | Feb 9, 2021 11:12 | | Subject: | TLG Factory Storage Box | | Viewed: | 126 times | | Topic: | Catalog | | Status: | Open | |
| I found a storage box which is to be used in TLG factories. Are they traded on
Bricklink? I didn'nt find them. Okay, they can not be buyed in a LEGO shop
- but it's also a LEGO product.
|
|
| Author: | samsam2 | | Posted: | Feb 8, 2021 01:49 | | Subject: | set 1944-1 | | Viewed: | 79 times | | Topic: | Catalog | | Status: | Open | |
| I'm wondering if these are the same set? The way they are listed seems strange
If one is a set containing a sub-set, shouldn't there
be just one set of instructions and one box?
|
|
| Author: | tonnic | | Posted: | Feb 7, 2021 17:12 | | Subject: | Are there differences in instructions CMF? | | Viewed: | 70 times | | Topic: | Catalog | | Status: | Open | |
| I had a question from a buyer regarding instructions of CMF’s.
He bought some from a different seller but due to our nice communication (I guess)
he asked me why the numbering of his series 13 didn’t make sense, he also missed
some and had some double.
If I am correct these leaflets are always the same unless you mark the empty
circle by yourself.
But maybe I need to be educated myself in this case...
The packages are marked with a barcode in the earlier series, later with dots/dents/pimples.
So if I am wrong I would like to know and I can give the information to my buyer
too, I will point this forumpost to him to.
Thanks already!
Ton
|
|
| Author: | native1 | | Posted: | Feb 6, 2021 21:03 | | Subject: | Iron Man Minifigs sh231 and sh036 exact same? | | Viewed: | 79 times | | Topic: | Catalog | | Status: | Open | |
| Is there a reason sh231 and sh036 are listed as different minifigures in the
catalog? They are part for part the exact same minifigure. I'm attempting
to collect all the iron man armors and just realized this.
Thanks!
|
| Author: | Fenneke_Jose | | Posted: | Feb 6, 2021 14:35 | | Subject: | VIP Coins Castle + Pirates | | Viewed: | 119 times | | Topic: | Catalog | | Status: | Open | |
| Hi,
I am looking for the VIP Coins. I have the Pirates Coin and now looking for the
Castle Coin, but I cannot find them in the cataloque.
So am I doing something wrong? Or are they still not availleble in the Bricklink
catalogue?
Kind regards,
José
|
|
| Author: | Miro78 | | Posted: | Feb 6, 2021 10:47 | | Subject: | Friends accessories pin vs bar classification | | Viewed: | 76 times | | Topic: | Catalog | | Status: | Open | |
| This pertains the difference between Friends accessories flowers and other accessories.
There appear to be 2 classifications in regards to connections. 1) thin pin and
2) bar thickness pin.
The catalogue descriptions don't differentiate them but it affects how they
can be connected. It would be great if the descriptions reflected the difference
as the thin pin accessories can mainly be connected to hair pieces with holes
and and the like, and the bar thickness accessories can be connected to broader
parts with bar holes, including grasping by hands.
Style 1 (thin pin) are these
* | | 18853 Friends Accessories Hair Decoration, Flower with Pointed Petals and Small Pin
Parts: Friends |
* | | 93080h Friends Accessories Hair Decoration, Flower with Serrated Petals and Small Pin
Parts: Friends |
* | | 93080g Friends Accessories Hair Decoration, Flower with Smooth Petals and Small Pin
Parts: Friends |
* | | 93080m Friends Accessories Hair Decoration, Tiara with 5 Points and Small Pin
Parts: Friends |
I think these also
* | | 11618 Friends Accessories Hair Decoration, Bow with Heart, Long Ribbon, and Small Pin
Parts: Friends |
Style 2 (bar thickness with pin hole on the bottom)
Miro
|
|
| Author: | co2Bricks | | Posted: | Feb 5, 2021 14:43 | | Subject: | Additional Listing for 32553cXX | | Viewed: | 55 times | | Topic: | Catalog | | Status: | Open | |
| Hello,
I have 3 part assemblies of 32553 in Light Gray with a 32554 in Trans-Light Orange
Many other variations exist as shown below:
Bionicle Head Connector Block 3 x 4 x 1 2/3 with Trans-Neon Orange Bionicle Head
Connector Block Eye/Brain Stalk (32553 / 32554)
Item No: 32553c04
Is it possible to get this added? Or is there a better solution for listing?
Thanks,
Carlyle
|
|
| Author: | G3NU5 | | Posted: | Feb 4, 2021 11:30 | | Subject: | Fake ninjago minifigs | | Viewed: | 134 times | | Topic: | Catalog | | Status: | Open | |
| I have unfortunately purchased an auction of many Ninjago minifigs which appear
to be very good fakes. Aside from missing LEGO logos, these are for the most
part look exactly the same.
I am not sure if this is the right place to post this, but I would like to post
pictures for awareness and education so others don't run into this issue.
If someone could suggest where a good place (this forum or otherwise) to put
up pictures of these fakes, I would appreciate it.
Here are some examples:
|
|
| Author: | G3NU5 | | Posted: | Feb 4, 2021 11:13 | | Subject: | 87747/93788 color question | | Viewed: | 51 times | | Topic: | Catalog | | Status: | Open | |
| I have a part 93788 (softer plastic version) in a color that does not look like
flat silver, but more like pearl, which is not in the catalog.
I am not certain which set this is from originally.
Image attached..
|
|
| Author: | normann1974 | | Posted: | Feb 4, 2021 08:31 | | Subject: | 4150px33 variant | | Viewed: | 91 times | | Topic: | Catalog | | Status: | Open | |
| According to the catalog, part has Dark Red print. I have two clearly
distinct colors of print, one Dark Red and one that looks (Reddish?) Brown. I
actually have 5 brown ones in stock.
Does this warrant a split or should a note be added?
/Jan
|
|
| Author: | Imagine.Bricks | | Posted: | Feb 4, 2021 07:02 | | Subject: | Slope Decorated | | Viewed: | 55 times | | Topic: | Catalog | | Status: | Open | |
| All,
In addition to my last post, also from set 75881-1 are these slopes with the
ford 66, exhaust and air vent pattern. I have both with me now so can take individual
pictures for the catalogue if needs be? I note that these do not appear in the
slope decorated parts list nor an an alternative item in the set's part list.
Rgds
Kaj
|
|
|
| Author: | Imagine.Bricks | | Posted: | Feb 4, 2021 06:58 | | Subject: | Technic Brick Decorated?? | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
| Morning all,
Currently cataloguing bulk parts from a recent purchase of used bricks and came
across a 1x1 technic brick (with hole) with a Michelin man sticker. Couple of
questions, does this warrant a new category in the parts catalogue (i.e. Technic
Brick Decorated) or should this just sit in the normal 'brick decorated'?
To the best of my knowledge this brick I think comes from set 75881-1 speed champions
2016 Ford GT (it hold's the rear light clusters on both side of the vehicle
- see attached photo) although this doesn't appear in the parts list for
this set as an 'alternative item'. Should I just send it to Bricklink
admin to add?
Thanks all, any help appreciated.
Rgds
Kaj
|
|
|
| Author: | infinibrix | | Posted: | Feb 4, 2021 06:06 | | Subject: | Separate Leg Hip wear from Torso Bodywear? | | Viewed: | 83 times | | Topic: | Catalog | | Status: | Open | |
| Can I make a suggestion that we create a new category for parts that are specifically
designed to go over the leg pins/hips and call it ‘Hip Wear’ or ‘Leg Wear’? as
there are plenty of them and probably many more that I have missed?
In my opinion ‘Body Wear’ should be left exclusively for all those parts that
are designed to go over the Torso/Neck piece only?
* | | 24087pb03 Minifigure Skirt Plastic, Ruffled (Ballerina Tutu) with White and Dark Pink Panels, Silver Stars, and Bright Light Orange Border Pattern
Parts: Minifigure, Body Wear |
[p=bb0869pb01]
[p=bb0886]
[p=bb0796pb01]
[p=28211pb01]
[p=bb0870]
[p=bb0869]
[p=bb0836pb01]
[p=18832c02]
|
|
| Author: | Karmenka | | Posted: | Feb 1, 2021 10:37 | | Subject: | Change date of release for Ninjago part | | Viewed: | 47 times | | Topic: | Catalog | | Status: | Open | |
| Hi everyone,
I was inventory'ing a Ninjago part and realized that online it says the date
of release is 2011 when in fact the printed year on part number 93070pb01 is
actually 2009. Minor change.
|
| Author: | EveryDayBrick | | Posted: | Feb 1, 2021 08:27 | | Subject: | Metro Park & Service Tower 6394-1 couterparts | | Viewed: | 57 times | | Topic: | Catalog | | Status: | Open | |
| Im not sure i did it coretly, but i add new item to catalog of 6394-1 couterparts:
2494pb74
Trans-Clear Glass for Window 1 x 4 x 5 with Shell Pattern (Sticker) - Set 6394
I add photo too.
Its my first thing added to the bricklink, can someone check it, do not remove
it just correct it if i made any mistake?
Greetings
|
|
| Author: | StormChaser | | Posted: | Feb 1, 2021 02:43 | | Subject: | Category Changes, Part Two | | Viewed: | 209 times | | Topic: | Catalog | | Status: | Open | |
| | Okay, we're ready to hear what you want moved. |
| Author: | ropa00 | | Posted: | Jan 27, 2021 04:40 | | Subject: | Set weight of Instruction 42111 to 396 Gram | | Viewed: | 43 times | | Topic: | Catalog | | Status: | Open | |
| Have weighed Instruction of 42111 to be 396 Gram.
Do we have someone more to confirm this ?
Many thanks // Ronny Paulsson
|
| Author: | Give.Me.A.Brick | | Posted: | Jan 26, 2021 10:24 | | Subject: | Part 52494 | | Viewed: | 90 times | | Topic: | Catalog | | Status: | Open | |
| Would you search for this little fellow on Plate Round category?
|
| Author: | Give.Me.A.Brick | | Posted: | Jan 26, 2021 10:21 | | Subject: | G3841 vs 3862 etc | | Viewed: | 51 times | | Topic: | Catalog | | Status: | Open | |
| Why is that the 3841 game is G3841 while the others don't have the "G" ?
[g=g3841]
[g=3862]
Thank you!
|
| Author: | seymour3113 | | Posted: | Jan 26, 2021 00:30 | | Subject: | set 76131 | | Viewed: | 64 times | | Topic: | Catalog | | Status: | Open | |
| | can we get the sticker pieces cataloged for this set. |
| Author: | Wookie305 | | Posted: | Jan 24, 2021 21:57 | | Subject: | Custom colors? | | Viewed: | 103 times | | Topic: | Catalog | | Status: | Open | |
| Im seeing alot of new entries into the catalog for alot of custom colors. Didnt
the catalog just get cleared of a ton of custom stuff not 6-10 months ago??
Can an admin fill me in on whats up? Id really apretiate it thanks.
|
|
| Author: | Leftoverbricks | | Posted: | Jan 23, 2021 11:23 | | Subject: | How to add 'bag' 21 of set 75978? | | Viewed: | 60 times | | Topic: | Catalog | | Status: | Open | |
|
contains a small box with a stand and two minifigures. However this box has no
separate entry in the catalogue yet. It has two part numbers: 6294189 printed
on all 8 sides of the box and a (SKU?) number 6328287.
I would like to add this to the catalogue but I don't know how to proceed
since it's not a set in itself.
Maybe treat it the same as cardboard sleeves, catalogue-wise? (I'm a little
experienced in this subject matter since I contributed a couple of those cardboard
thingy's that everyone disposes off).
Reference to the Brickset article about it's contents: https://brickset.com/article/53699/review-75978-diagon-alley-(secret)
|
|
| Author: | Doughboy6480 | | Posted: | Jan 23, 2021 11:15 | | Subject: | Catalog item missing Size | | Viewed: | 37 times | | Topic: | Catalog | | Status: | Open | |
| When looking into items that could not be bought out of my store with instant
checkout found that. Set ID: Col19-5, Col20-1, Col20-7, Col20-13, Coldis-14,
Coldis2-18, Coldis2-8 and Colsh-2 are all missing the size. First is this way
its stopping the instant checkout on these items? Second is there a way I can
edit this or the weight in my own inventory as I cant seem to find a way to edit
them?
|
|
|
| Author: | Reki_Lobsheek | | Posted: | Jan 22, 2021 11:43 | | Subject: | Super Heroes category in stores FIXED | | Viewed: | 36 times | | Topic: | Catalog | | Status: | Open | |
| Yesterday I noticed the issue of not being able to click on the Super Heroes
category in stores (https://www.bricklink.com/message.asp?ID=1243705) has been
fixed.
I couldn't find any anouncement on this in the forum, so I wanted to thank
the people who fixed this!
It was a serious PITA IMO, so I'm glad it finally got fixed.
Erikk
|
| Author: | psusaxman2000 | | Posted: | Jan 22, 2021 08:59 | | Subject: | Minifig Catalog Image Photoshopped | | Viewed: | 168 times | | Topic: | Catalog | | Status: | Open | |
| Sorting through the catalog to complete minifig and came across .
Is this a real minifig? If so, can someone submit an actual picture so we don't
have a weird photoshopped image.
|
| Author: | malky | | Posted: | Jan 21, 2021 22:05 | | Subject: | Number bricks | | Viewed: | 95 times | | Topic: | Catalog | | Status: | Open | |
| I’ve got a collection of number bricks in a font other than what I can find in
the current catalogue (ie not standard, bold or serif).
Am I just not managing to find the correct entry or is their justification for
adding these patterns to the catalogue?
|
|
| Author: | blouphil | | Posted: | Jan 21, 2021 13:56 | | Subject: | Set 6237339-1 & "Item Consists Of" | | Viewed: | 47 times | | Topic: | Catalog | | Status: | Open | |
| Hello,
I've had this set added to the inventory (6237339-1), however this set "Consists
Of" sets 60190-1 and 60191-1
How can I add these two sets to "Item Consists Of" of 6237339-1?
Thank you
|
| Author: | Doodlebug | | Posted: | Jan 21, 2021 12:07 | | Subject: | 970ps5 part deletion | | Viewed: | 75 times | | Topic: | Catalog | | Status: | Open | |
| | No reason is given why this part is scheduled for deletion. Why? |
|
|
| Author: | infinibrix | | Posted: | Jan 19, 2021 07:59 | | Subject: | Catalog missing Head Stud Type (Draco)? | | Viewed: | 58 times | | Topic: | Catalog | | Status: | Open | |
| Whilst it will already be known to many that I'm not a fan of the fact that
the catalog insists that sellers separate their head stud types and with their
being no change in sight I am now begrudgingly starting to sort through my heads
so that I don't run into problems with customers because regardless of what
I state in my store terms about "Not separating stud types" this won't count
for much in the eyes of Bricklink(Admin has already told me as much!) if/when
a customer chooses to complain and leave negative feedback for receiving the
wrong stud!
However whilst only in the early stages of sorting I've already noticed this
part only available to list in 'Blocked Open Stud' yet I also have some
of these in 'Hollow Stud' too?
Its a 10 year old part and so is there any reason both options are not in the
catalog and can I expect more of the same or have I just been unlucky?
If stud type is so important to people how is it that its gone unnoticed for
so long?
|
|
| Author: | novabrick | | Posted: | Jan 19, 2021 04:09 | | Subject: | Have all printed Legs been deleted? | | Viewed: | 197 times | | Topic: | Catalog | | Status: | Open | |
|
Today I saw that the printed Leg in our inventory got marked for deletion. I
saw that even more are marked likewise. Is there a reason behind it I missed?
Christian
novabrick-team
|
| Author: | Give.Me.A.Brick | | Posted: | Jan 15, 2021 16:01 | | Subject: | 49109pb01 | | Viewed: | 85 times | | Topic: | Catalog | | Status: | Open | |
|
For the life of me I can't see any Print here. Shouldn't it just be 49109?
|
| Author: | boozmork | | Posted: | Jan 15, 2021 07:58 | | Subject: | KingsKnight Orbiter Wheel Parts | | Viewed: | 50 times | | Topic: | Catalog | | Status: | Open | |
| Hi all,
I'm struggling to get an exact parts list for the Optional Orbiter Wheels
for the KingsKnight set. They don't appear in the Studio or Rebrickable parts
as they're optional and my inexperienced eye can't discern what I'm
looking at in the instructions.
Can anybody provide a list of the part numbers please?
Cheers
|
| Author: | fin_and_daddy | | Posted: | Jan 12, 2021 18:25 | | Subject: | 10195 Dropship | | Viewed: | 156 times | | Topic: | Catalog | | Status: | Open | |
| Hello, does anyone have a Wanted List for just the dropship from the 10195 set
please?
I've spent three evenings going through my manual and making a wanted list
from it, but accidentally deleted it after just finishing the first book. I'm
devastated!
If anyone has already made a list I would be very grateful if I could have a
copy!
|
| Author: | peregrinator | | Posted: | Jan 12, 2021 11:46 | | Subject: | Inventorying Yellow Taxi | | Viewed: | 57 times | | Topic: | Catalog | | Status: | Open | |
| Hi all,
I'm in the midst of inventorying the new Yellow Taxi set (40468-1):
There is a new piece included (at least, I have not been able to find it). How
should this piece be categorized, do you think? Plate, modified, 2x2? Plate,
modified, 2x4? Adding this plus the sticker sheet should complete the inventory.
|
|
| Author: | Hexy | | Posted: | Jan 11, 2021 23:33 | | Subject: | Cylinder Hemisphere 3 x 3 Ball Turret Socket | | Viewed: | 53 times | | Topic: | Catalog | | Status: | Open | |
| Hello,
I was looking through some BrickLink categories and came to 'cylinder'.
In there I found piece 44358 and its counterpart. Together these form a sphere
and don't resemble a cylinder in any way. Does anyone have an explanation
for this, or is it worth me putting in a category change request?
Thanks in advance,
Theo - The_RealRedHex
|
|
| Author: | MarauderDeuce | | Posted: | Jan 11, 2021 22:15 | | Subject: | Alternative search terms or standardisation | | Viewed: | 61 times | | Topic: | Catalog | | Status: | Open | |
| I was looking up ball socket, trying to find a part with no success.
When I did finally find the part I was looking for it was listed as having a
ball receptacle rather than socket.
Can these bricks have alternate search terms so that a search for Ball socket
will also turn up ball receptacle and vice versa?
Failing that, standardisation so that if we find the right term we'll actually
get all the matching parts.
|
|
|
|
| Author: | Hexy | | Posted: | Jan 10, 2021 21:00 | | Subject: | Dimensions of Bucket Wheel Excavator | | Viewed: | 58 times | | Topic: | Catalog | | Status: | Open | |
| I was searching through the catalogue and found that the dimensions of the bucket
wheel excavator are different than what it says on the box. On the inside flap
of the box it says that the excavator is 72cm long, however on the bricklink
database it says that the model is 58.2 x 48 x 17 cm. I'm sure that the box
wouldn't be incorrect, but I'm also stumped at how someone can measure
over 10cm off the correct measurement. Is this just a mistake in the database
or an incorrect measurement?
|
|
| Author: | psusaxman2000 | | Posted: | Jan 10, 2021 18:57 | | Subject: | Clarification on Set 7413 | | Viewed: | 72 times | | Topic: | Catalog | | Status: | Open | |
| I acquired a bulk lot recently and it included instruction and parts for .
It included a number of other sets as well, so I went ahead and printed inventory
sheets from BL at the time so that I could pick through the parts and sort them
out accordingly. After sorting everything out, I'm rebuilding the set just
to make sure again that everything is there and noticed in step 9 (image) that
it uses
* | | 30389 Hinge Brick 2 x 2 Locking with 1 Finger Vertical (Undetermined Type)
Parts: Hinge |
. The inventory that I have printed has
* | | 30389b Hinge Brick 2 x 2 Locking with 1 Finger Vertical and Axle Hole
Parts: Hinge |
and now
I see on the current inventory that it's [p=30389c]. I see that all three
versions of this part were in use in 2003 when this set was produced, but want
to make sure that I have a valid inventory if I try to put this set up for sale.
Can someone confirm as the parts that I had for building this inventory included
one of 30389 and one of 30389c. Since I need to acquire two of a like part for
the set, I'd like to get the correct version.
|
|
|
| Author: | DeLuca | | Posted: | Jan 10, 2021 09:13 | | Subject: | Please Change Name of Part (973pb4140c01) | | Viewed: | 94 times | | Topic: | Catalog | | Status: | Open | |
| Please change Part (973pb4140c01) to "Torso Space Futuron, Black Panels with
Gold Zipper and Classic Space Logo on Front and 'Police' on Back, Blue
and Light Bluish Gray Lines Pattern / Black Arms / White Hands".
Not to contribute to title-bloat, but since the word "Police" features prominently
on this part, it needs to be included in the description, since that is
how most people would search for it. 😕
|
|
| Author: | jennnifer | | Posted: | Jan 9, 2021 14:49 | | Subject: | A little help! Dots tile images | | Viewed: | 95 times | | Topic: | Catalog | | Status: | Open | |
| Hey!
I am working on the inventory for the new Dots Series 3 packs. I opened three
of them but only got 13 of the 16 tiles. I have created catalog entries for the
other 3, but I need images so they can be approved. You can submit the images
directly, or send them to me. I can crop and submit them if that is easier for
you.
https://www.bricklink.com/catalogList.asp?myPend=Y
Thanks for helping out!
Jen
Here's what they look like scraped from some videos on youtube:
|
|
|
| Author: | Oakelm | | Posted: | Jan 9, 2021 13:41 | | Subject: | Police Station alternate clock tile? | | Viewed: | 82 times | | Topic: | Catalog | | Status: | Open | |
| Just building not parting out the police station modular Set 10270
In Bag Number 5 build step 93 page 82
Notice the graphic suggests part number
14769pb001
Even the inventory on the online instructions suggest the older one based on
look
But I'm sitting here with part 14769pb356 instead
Anyone else had this? Notice this?
|
|
| Author: | Roxyncz | | Posted: | Jan 8, 2021 12:02 | | Subject: | How to find a part with a sticker | | Viewed: | 62 times | | Topic: | Catalog | | Status: | Open | |
| Hi, I want to ask how can I find a part with a sticker that we don't have
on a bricklink?
I just added part 85984pb292 but I don't know what set it is from. How are
you looking?
One time consuming way is to find a black part 85984, but look at each set in
which this part is.
|
| Author: | peregrinator | | Posted: | Jan 7, 2021 21:39 | | Subject: | How does one inventory a minifig? | | Viewed: | 94 times | | Topic: | Catalog | | Status: | Open | |
| I have this one on hand, how can I add an inventory for it?
I think only the head is a new piece - the torso and legs appear to be the same
as in this minifig:
|
|
| Author: | patrizio84 | | Posted: | Jan 7, 2021 05:06 | | Subject: | Why change rejected | | Viewed: | 151 times | | Topic: | Catalog | | Status: | Open | |
| Hi,
Just tried to edit:
Part 3070bpb184 Tile 1 x 1 with Groove with Glitter Trans-Clear Diamond Pattern
(Dual Molded)
I suggested a few changes, all were rejected. this means wrong color is in the
name (it's not Glitter Trans-Clear, might look so in the LEGO picture but
it's definitely not clear).
The other changes I don't understand the rejection but there might be a reason.
Why this is a decorated tile instead of modified (since it's not flat). Can
someone please explain this to me for future understanding what is and isn't
the right use?
Thanks!
Rejected Change Item Name from {Tile 1 x 1 with Groove with Glitter Trans-Clear
Diamond Pattern (Dual Molded)} to {Tile 1 x 1 with Satin White Diamond (Dual
Molded)}
Rejected Change Category from {Tile, Decorated} to {Tile, Modified}
|
|
|
| Author: | superchicken77 | | Posted: | Jan 6, 2021 13:47 | | Subject: | Where's case 759528? | | Viewed: | 64 times | | Topic: | Catalog | | Status: | Open | |
| How can there be a divider for something that doesn't exist? The case 759528
doesn't exist in the catalogue but is referenced in the item below.
|
| Author: | Admin_Russell | | Posted: | Jan 6, 2021 08:40 | | Subject: | We have a new Catalog Admin! | | Viewed: | 275 times | | Topic: | Catalog | | Status: | Open | |
| We have just promoted our Catalog Associate, StormChaser, to the Catalog Admin
position. This change will give him privileges on the inventories side of the
catalog while he retains the catalog side privileges.
Thank you, StormChaser, for your continued efforts to improve out catalog system!
|
| Author: | tpr | | Posted: | Jan 6, 2021 06:05 | | Subject: | Snowman or not Snowman ?? | | Viewed: | 87 times | | Topic: | Catalog | | Status: | Open | |
| Hi
are classed as snowmen, but
is just parts
But hol130 and 60063-4 are both from advent calendars
Explanation please
tpr
|
|
| Author: | 1977_mauro | | Posted: | Jan 5, 2021 10:55 | | Subject: | Extra head in 8823? | | Viewed: | 77 times | | Topic: | Catalog | | Status: | Open | |
| I have parted 4 weeks ago this set:
and found this extra head:
* | | 3626bpb0267 Minifigure, Head Reddish Brown Eyebrows, Moustache, and Angular Beard, Upper Eyelids, Black Glasses with White Lenses, Neutral Pattern - Blocked Open Stud
Parts: Minifigure, Head |
I was pretty sure that this was packed by a mistake into this set.
Today I opened another one with the same extra head included.
Shoul I add it as an extra part?
Mauro
|
|
| Author: | Mirko8710 | | Posted: | Jan 4, 2021 15:10 | | Subject: | Why 38014pb01 is not a Minifigure? | | Viewed: | 142 times | | Topic: | Catalog | | Status: | Open | |
| Hi all!
I didn't find any question about that in the Forum, so, I'm asking.
Since Chip is a realt character as Ms Potts o Cogsworth are, why it is not considered
as a Minifigure instead of a normal Decorated Utensil?
Thank you and Happy New Year
[p=38014pb01]
https://www.bricklink.com/v2/catalog/catalogitem.page?P=38014pb01&idColor=1#T=P&C=1
|
|
| Author: | 1977_mauro | | Posted: | Jan 4, 2021 12:42 | | Subject: | Stable content of set 4562 | | Viewed: | 77 times | | Topic: | Catalog | | Status: | Open | |
| Hi all,
I have parted out this sealed set:
The content described as stable was not really matching my content.
When I count the regular bricks in this set in the BrickLink inventory then I
can see 208 parts. It should be 200, not more. But when I exclude the 4 lots
that were not included in my content then I will come to around 192 - 196.
I don't know if it would make sense to remove the 4 items from regular to
extra section. Then we would have not all regular items included but at least
we would really know for sure that the parts in the regular section are the correct
ones.
Mauro
P.S. I have found around 20 - 25 extra lots (mostly items already mentioned in
this section but in a different color). I don't think that this makes really
sense to include them as it seems that they have put into the extra section everything
they have found in their factory. 
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
)
)
)
)
)
)
)
)
)
