Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Miro78 | Posted: | Aug 5, 2020 18:20 | Subject: | Orange Classic Space minifigure | Viewed: | 239 times | Topic: | Catalog | Status: | Open | |
| It has come to my attention that Benny minifigures do not contain the wording
'Classic Space' which all the other versions of the classic space minifigure
do contain that. Some of the re-released classic space minifigures are from The
Lego Movie and hence their 'tlm' minifig prefix. Is there are reason
why Benny does not get the honor of having the 'Classic Space' description?
When searching for 'Classic Space' minifigures other town figures come
up with the classic space figure helmet or spaceman or whatnot on their shirt.
I guess what I am saying is that it would make it more uniform to have all of
them have the Classic Space designation in their title description so that they
can all be found since they are scattered across Space, The Lego Movie, and Town
categories.
Lastly, the orange Classic Space minifigure (not really sure it would be considered
reissue it being a new color) is coming out in October, and from looking into
other DK books, it looks like it will have the 'sp' prefix. I have the
figure on hand. Just let me know if you want me to take a photo of it for the
catalogue. I do not have the book.
figure reference: https://www.brothers-brick.com/2020/01/03/new-orange-spaceman-joins-the-classic-space-lego-minifigure-lineup-news/
The book is not out until October 13th in US, October 1st in UK through Amazon.
My photo of the gang (minus the gray space guy, I am awaiting his helmet)
Miro
|
|
|
Author: | Miro78 | Posted: | Jul 18, 2020 13:36 | Subject: | Missing large/high quality images in catalog | Viewed: | 74 times | Topic: | Catalog | Status: | Open | |
| A lot of old Lego sets have very small images in the Bricklink catalog. They
look like they were obtained from printed sources from the printed catalogs that
used to be included with those sets back in the 80s/90s. My suggestion is to
see if better quality and higher resolution images can be obtained from The Lego
Group for the Bricklink catalog. After all, Lego owns Bricklink. What does the
admin team think of this? Perhaps I am assuming too much and a convenient archive
of these images for all of these old sets does not readily exist for Bricklinks
use. It's worth checking into it. Are there any objections?
Miro
|
|
Author: | Miro78 | Posted: | May 25, 2020 11:40 | Subject: | Need of Plate/Tile Round Modified categories | Viewed: | 57 times | Topic: | Catalog | Status: | Open | |
| If this is on the Catalog roadmap, my apologies, but I am noticing some logic
discrepancies on how some of these parts are allocated to their current categories.
Fo obvious reasons, part 25269 (Tile, Round 1 x 1 Quarter) is in the Tile Round
category, because 4 of these makes a nice circle shape.
Therefore I am assuming Part 24246 (Tile, Modified 1 x 1 Half Circle Extended
(Stadium)) is in the Tile Modified category because it's irregular and makes
no circle shape, despite one side being round.
Yet part 39739 (Tile, Round 1 x 1 Heart) is in the Tile Round category, despite
the fact that it makes no circular shape (clover leaf shape at best). To me,
they should either be in the Tile Round or Tile Modified as it's confusing
things.
There are other parts in the Tile Round category which are clearly modified like
This is also true for Plate Round category items. Perhaps it's time to create
Plate Round Modified and Tile Round Modified categories. There may be reason
for not doing this now, but things like this really bug me when searching for
parts where my logic fails to find them, usually parts falling into 2 or 3 categories
due to vague nature of classification.
Miro
|
|
Author: | Miro78 | Posted: | May 21, 2020 13:06 | Subject: | Is dual color mold really decorated? | Viewed: | 132 times | Topic: | Catalog | Status: | Open | |
| Should dual molded legs or arms in their respective assemblies really be considered
as decorated?
To me BL considered the decorated as by means of printing or applying decoration
using stickers.
example
the reasoning is, how is that any different from legs assembly with single color
legs but different color hips or mismatched leg colors?
I feel the same way about dual molded arms
There are reasons for not separating them, mainly for new buyers not knowing
or caring about the difference or just the general way of looking at it, but
I feel like there is no real definition for the term decorated that should be
defined. As far I am concerned, dual color molding is not really decorating.
Any thoughts?
Miro
|
|
Author: | Miro78 | Posted: | Feb 29, 2020 11:27 | Subject: | Inventory Backup/Restore/Deletion Prevention | Viewed: | 119 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| To prevent accidental deletion of inventory or restore of store's inventory
for various reasons like accidental deletions, price changes, etc. Currently
changes cannot be undone and a self administered restore function would be beneficial.
Requiring administrative assistance in restoring one's inventory is inconvenient
on both the seller and the BL team.
Remedy Option 1
To prevent strain on the infrastructure of constant periodic backups of everyone's
inventory, the backup would only initiate when a user enters their store's
inventory page, and limited to certain time intervals (once a day, once per hour,
or whatever the system can handle). The seller would have the option of self
initiate backup as needed.
Remedy Option 2
If the infrastructure cannot handle backups on their own system, perhaps Bricklink
can prompt user with an option to download inventory prior to deletion or major
changes being done to it, and self administer restore function.
Remedy Option 3
At the least, the system should require a re-login to the account when inventory
deletion function is selected to prevent accidental deletion of the store's
inventory.
The above options are no mutually exclusive and can be implemented in tandem
depending on what Bricklink system/team can implement.
|
|
Author: | Miro78 | Posted: | Jun 23, 2017 10:28 | Subject: | Electronic delivery need for instant checkout | Viewed: | 130 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| With instant checkout looming around the corner, I would like to have the option
for my buyers to be able to use the instant checkout option when purchasing my
electronically delivered custom model instructions.
However, at the moment, I cannot differentiate these electronic instructions
from actual paper instructions. I am not allowed to set the weight to zero grams
or selecting a checkbox that these are electronic. How will this be handled during
instant checkout with causing some sort of error?
Please allow for an option for sellers of custom instructions to be able to allow
instant checkout.
There are other sellers who use Bricklink for selling these and would benefit
from this implementation. It would also cause less issues and confusion if this
is properly handled. Lastly, this will draw more sellers of custom instructions
to sell through Bricklink instead of other venues.
Thank you for the consideration.
Miro
|
|
Author: | Miro78 | Posted: | Jul 3, 2015 10:39 | Subject: | Inventory Change Request for Set 7939-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 44375 White Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type (match ID 15)
* Add 2 Part 44375a White Dish 6 x 6 Inverted (Radar) - Hollow Studs (match ID 15)
Comments from Submitter:
see linked review on Eurobricks for variant in the set
http://www.eurobricks.com/forum/index.php?showtopic=41847
|
|
Author: | Miro78 | Posted: | Jul 3, 2015 10:36 | Subject: | Inventory Change Request for Set 60036-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 44375 White Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type (match ID 1)
* Add 1 Part 44375b White Dish 6 x 6 Inverted (Radar) - Solid Studs
Comments from Submitter:
see linked review on Eurobricks for type of dish in the set
http://www.eurobricks.com/forum/index.php?showtopic=95962
|
|
Author: | Miro78 | Posted: | Jul 3, 2015 10:30 | Subject: | Inventory Change Request for Set 850851-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 44375 White Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type
* Add 1 Part 44375b White Dish 6 x 6 Inverted (Radar) - Solid Studs
Comments from Submitter:
see image: https://www.flickr.com/photos/miro78/9613844031/
|
Author: | Miro78 | Posted: | Jul 3, 2015 10:28 | Subject: | Inventory Change Request for Set 850850-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 44375 White Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type
* Add 1 Part 44375b White Dish 6 x 6 Inverted (Radar) - Solid Studs
Comments from Submitter:
see image: https://www.flickr.com/photos/miro78/9620767025/
|
Author: | Miro78 | Posted: | Jul 3, 2015 10:27 | Subject: | Inventory Change Request for Set 850852-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 44375 White Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type
* Add 1 Part 44375b White Dish 6 x 6 Inverted (Radar) - Solid Studs
Comments from Submitter:
see image: https://www.flickr.com/photos/miro78/9617066270
|
Author: | Miro78 | Posted: | Jul 3, 2015 10:25 | Subject: | Inventory Change Request for Set 850849-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 44375 White Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type
* Add 1 Part 44375b White Dish 6 x 6 Inverted (Radar) - Solid Studs
Comments from Submitter:
see image: https://www.flickr.com/photos/miro78/9624028788/
|
Author: | Miro78 | Posted: | Jul 3, 2015 10:17 | Subject: | Inventory Change Request for Set 850843-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 44375 White Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type
* Add 1 Part 44375b White Dish 6 x 6 Inverted (Radar) - Solid Studs
Comments from Submitter:
see image here: https://www.flickr.com/photos/miro78/9624017950/
|
|
|
Author: | Miro78 | Posted: | Jul 3, 2015 09:54 | Subject: | Inventory Change Request for Set 850842-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 44375 White Dish 6 x 6 Inverted (Radar) - Undetermined Stud Type
* Add 1 Part 44375b White Dish 6 x 6 Inverted (Radar) - Solid Studs
Comments from Submitter:
Changing to a known variant since the undetermined version is marked for deletion. Variant in this set shown here: https://www.flickr.com/photos/miro78/9623989116/
|
|
Author: | Miro78 | Posted: | Feb 10, 2015 04:04 | Subject: | Inventory Change Request for Set 40058-1 | Viewed: | 43 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 15332 Reddish Brown Fence Spindled 1 x 4 x 2 with 4 Studs (Alternate) (match ID 2)
* Change 2 Part Reddish Brown 30055 Fence Spindled 1 x 4 x 2 with 2 Studs {match ID 0 to 2}
Comments from Submitter:
All of my sets contain the new variant fence with 4 studs on top.
|
|
Author: | Miro78 | Posted: | Nov 26, 2014 09:22 | Subject: | Inventory Change Request for Set 41003-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3794 Lime Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 2)
* Change 1 Part Lime 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 2}
Comments from Submitter:
found this version in a sealed set
|
|
Author: | Miro78 | Posted: | Sep 2, 2014 02:37 | Subject: | Inventory Change Request for Set 41056-1 | Viewed: | 48 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 553c White Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 1)
* Change 1 Part White 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 1}
* Change {1 to 2} Part Trans-Yellow 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
My set contained the recessed stud and not blocked stud variant of the 2x2 dome, and an extra 1x1 yellow round plate.
I submitted new fig entry frnd066a, because the current inventory shows Andrew without headphones, and the minifig should come with the headphones, per BL minifig rules. Once it is approved, the figs need to be switched and headphones need to be removed from regular parts list.
|
|
Author: | Miro78 | Posted: | Aug 12, 2014 03:42 | Subject: | Inventory Change Request for Set 70127-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 3048b Black Slope 45 2 x 1 Triple Smooth
* Add 1 Part 15571 Black Slope 45 2 x 1 Triple - with Inside Stud Holder (match ID 1)
* Add 1 Part 3048c Black Slope 45 2 x 1 Triple - with Inside Bar (Alternate) (match ID 1)
Comments from Submitter:
The smooth variant does not exist in this set and has been replaced by the rough variant, along with the bottom stud holder variant, which I have seen both. Much like the 1x2 jumper plate, the bottom stud holder will replace the 3048c version over time.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|