| Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Teup  | | Posted: | May 25, 2020 12:00 | | Subject: | Re: Disable Buyer's Ability to mark order Paid | | Viewed: | 47 times | | Topic: | Suggestions | |
| In Suggestions, Mistress_Lisa writes:
| | Someone just ordered from me and marked the order paid when I haven't even
sent an invoice yet! But now the line is grayed out, and I am unable to send
an invoice!
|
I'm pretty sure that's a bug.. buyers can't change the order status
to paid, only sellers or onsite payment can.
| | Why is there even the option for a buyer to mark the order paid?
As a seller, it doesn't matter to me if the numbers are in bold (showing
'paid' since I don't think it is paid until I check Paypal to make
sure it is in my account. (or received the check in the mail or whatever).
Like Scrooge, I don't ship until I have the 'cash in hand', so I
should be the only one to mark it paid. (or the Paypal link, that is fine too,
just not the buyer).
Lisa at Brick Dungeon
|
So.. are you talking about the order status, or about the grand total showing
in bold because the buyer submitted the payment? You'd want to remove the
latter just because you don't need it?  Well, I need it.. not everyone
works with PayPal. If buyers send me bank transfers, I need to see that so that
I can ship their order or verify the payment. It's a pretty important feature
to me.
|
 |
| Author: | StarBrick | | Posted: | May 25, 2020 11:58 | | Subject: | Re: Disable Buyer's Ability to mark order Paid | | Viewed: | 50 times | | Topic: | Suggestions | |
| In Suggestions, Mistress_Lisa writes:
As a buyer, I use the 'paid' option to inform my seller I have paid for
the order.
Usefull for non-instant-checkout sellers!
|
|
| Author: | Mistress_Lisa | | Posted: | May 25, 2020 11:41 | | Subject: | Disable Buyer's Ability to mark order Paid | | Viewed: | 218 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| Someone just ordered from me and marked the order paid when I haven't even
sent an invoice yet! But now the line is grayed out, and I am unable to send
an invoice! Why is there even the option for a buyer to mark the order paid?
As a seller, it doesn't matter to me if the numbers are in bold (showing
'paid' since I don't think it is paid until I check Paypal to make
sure it is in my account. (or received the check in the mail or whatever).
Like Scrooge, I don't ship until I have the 'cash in hand', so I
should be the only one to mark it paid. (or the Paypal link, that is fine too,
just not the buyer).
Lisa at Brick Dungeon
|
|
| Author: | superchicken77 | | Posted: | May 25, 2020 09:29 | | Subject: | Re: Best way to inventory | | Viewed: | 41 times | | Topic: | Suggestions | |
| You can also add to your store and keep it closed. There are other sites for
personal inventory management if that's what your end goal is.
In Suggestions, bobbyworld writes:
| | Hello I am having a small problem. I was wandering if there was a best way to
inventory all my parts I have without putting them into a store? The problem
I am having is I keep reordering parts over and over I already have. My next
question would I be able to compare my wanted list to parts inventory I got already?
Thanks
|
|
|
| Author: | Brick546 | | Posted: | May 25, 2020 09:20 | | Subject: | Re: Best way to inventory | | Viewed: | 43 times | | Topic: | Suggestions | |
| In Suggestions, bobbyworld writes:
| | Hello I am having a small problem. I was wandering if there was a best way to
inventory all my parts I have without putting them into a store? The problem
I am having is I keep reordering parts over and over I already have. My next
question would I be able to compare my wanted list to parts inventory I got already?
Thanks
|
Howdy.
It took me a long time to start my store as I was wondering how to overcome these
types of questions. The simple fix is you have the option to add to a stockroom
or not. So anything I am happy to sell has no stockroom. Anything I need to come
back to Stockroom A, anything I certainly do not want to sell Stockroom B. To
throw a curve ball in anything that I want to keep but am happy to sell for the
right price , I price accordingly.
Your second question is answered by doing it this way in the first place. You
can then simply order stock that you do not have and it will not order what you
have either in store or in stockroom.
Cheers,
Adam
|
|
| Author: | bobbyworld | | Posted: | May 25, 2020 08:08 | | Subject: | Best way to inventory | | Viewed: | 148 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| Hello I am having a small problem. I was wandering if there was a best way to
inventory all my parts I have without putting them into a store? The problem
I am having is I keep reordering parts over and over I already have. My next
question would I be able to compare my wanted list to parts inventory I got already?
Thanks
|
|
| Author: | Stellar | | Posted: | May 22, 2020 16:49 | | Subject: | Re: High to low price? | | Viewed: | 49 times | | Topic: | Suggestions | |
| In Suggestions, BulbaNerd4000 writes:
| | I think that when going to a category such as Minifigures, parts, or sets there
should be an option to sort from highest to lowest price and vice versa. A benefit
of this would be if I wanted, say, a Ninjago villain because all I have are ninja,
but I don’t want to pay a lot, I could just sort the entire Ninjago minifigure
category from lowest to highest price and select the first cool villain I find,
which is obviously the cheapest because of how it would be sorted. It would make
it a lot easier than searching through a bunch of characters and writing down
all the prices. I have added a picture of where this should go in the catalogue.
I hope you consider my suggestion.
|
Try the Advanced search for this: https://www.bricklink.com/searchAdvanced.asp
You can access it clicking the magnifying glass icon next to the top search button.
|
|
| Author: | BulbaNerd4000 | | Posted: | May 22, 2020 16:46 | | Subject: | High to low price? | | Viewed: | 84 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| I think that when going to a category such as Minifigures, parts, or sets there
should be an option to sort from highest to lowest price and vice versa. A benefit
of this would be if I wanted, say, a Ninjago villain because all I have are ninja,
but I don’t want to pay a lot, I could just sort the entire Ninjago minifigure
category from lowest to highest price and select the first cool villain I find,
which is obviously the cheapest because of how it would be sorted. It would make
it a lot easier than searching through a bunch of characters and writing down
all the prices. I have added a picture of where this should go in the catalogue.
I hope you consider my suggestion.
|
|
|
| Author: | tatane79 | | Posted: | May 19, 2020 04:35 | | Subject: | Re: Some interface improvement proposals | | Viewed: | 51 times | | Topic: | Suggestions | |
| | | | |
2. In the orders, I would like to keep the ID# of each part. Currently,
only the name of the part is kept.
|
+1
|
Hi,
I've actually found a functionality already available in BrickLink interface
to add the part ID# to the orders:
On the "Order Placed" screen, "Settings" "My Orders Settings" / "Order Detail
Settings" / "Show Item Number" tickbox.
Cheers,
Jonathan.
|
|
| Author: | jurcek | | Posted: | May 19, 2020 01:40 | | Subject: | Re: No Dimensions in Catalog | | Viewed: | 35 times | | Topic: | Suggestions | |
| In Suggestions, Admin_Russell writes:
| | In Suggestions, SchmickBricks writes:
| | Can we please have a function to search for items in our inventory with no catalog
dimensions? We already have one to search for weight, but not dimensions for
some strange reason.
I'm getting tired of bulky items sneaking through Instant checkout at letter
rates because they're missing catalog dimensions, and I have no way of finding
which items need me to manually enter their dimensions.
|
The solution is already there for you. Be sure you have dimensions / weight turned
on for your store and then select the "Instant Checkout Unavailable" box in the
Show More Options section in your store inventory.
|
Russell, how is it with dimensions of minifigures? I had often an order for 1
minifigure and the option Letter was offered at the instant checkout, because
there are no dimensions for them, and you can imagine, that you cannot send them
as letter, because they are to big for it. Any chance there will be a sollution
for this also, or do we have to put in the dimensions by ourselves?
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
|
