Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | paulvdb  | | Posted: | Feb 4, 2020 15:17 | | Subject: | Re: I'm back! | | Viewed: | 61 times | | Topic: | Inventories | |
| In Inventories, randyf writes:
| | Just a quick note to let everyone know that I am back in the saddle for BrickLink!
I will begin by hammering on the backlog of pending inventories later today.
If you have been waiting for these inventories to part out, please have a bit
more patience as I work through these since there are a significant amount to
catch up on.
Cheers,
Randy
|
I'm also back. I won't really be starting just yet. Need to get some
sleep but will work on the backlog of pending inventories tomorrow.
|
 |
| Author: | paulvdb | | Posted: | Jan 27, 2020 04:05 | | Subject: | Inventory Change Request for Set 60258-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 44302a Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove {match ID 0 to 1}
Comments from Submitter:
My set has 44302a
|
|
| Author: | paulvdb | | Posted: | Jan 19, 2020 03:03 | | Subject: | Re: 7662 MTT Reddish-Brown 4460a Slope | | Viewed: | 42 times | | Topic: | Catalog | |
| In Catalog, M.Boss writes:
| | Hi,
I recently purchased a used 7662 MTT set. Instead of the 4460a reddish-brown
slopes listed in the BrickLink inventory, it came 4460b slope. I also noticed
the set listed 4460b slopes in DBG as a counterpart. I know it is a longshot,
but could someone who purchased this set brand new check if their set's 4460
slope has hollow studs or open studs. Thank You!
|
Based on the year of release it is possible that 4460b was included in later
production runs of this set.
|
|
| Author: | paulvdb | | Posted: | Jan 12, 2020 07:43 | | Subject: | Re: Inventory Change Request for Set 60020-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| | Please make changes to the following inventory:
* Delete 2 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) (Alternate) (match ID 1)
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 4 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (Undetermined Version) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 4 Part Light Bluish Gray {42610c01 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5 x 6 Shallow Staggered Treads (42610 / 51011u) to 42610c03 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409)} {Counterpart to Regular}
Comments from Submitter:
source: part out sets and own collection
|
Another one where 3794 should not be deleted but changed to 3794a. First, 3794
was added as an alternate indicating that it was intended to be 3794a. And second,
this screenshot from a video review clearly shows 3794a.
|
|
|
| Author: | paulvdb | | Posted: | Jan 12, 2020 07:34 | | Subject: | Re: Inventory Change Request for Set 60025-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| | Please make changes to the following inventory:
* Delete 3 Part 3794b Red Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 1)
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 5 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads - (Undetermined Version) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 3 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
* Change 5 Part Light Bluish Gray {42610c01 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5 x 6 Shallow Staggered Treads (42610 / 51011u) to 42610c03 Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409)} (Counterpart)
Comments from Submitter:
source: part out sets and own collection
|
Part 3794 in red should not be removed from this set. It should be changed to
3794a because both variants were found in this set. Several video reviews of
the set show 3794a. Included a screenshot from one of them that clearly shows
it.
|
|
|
| Author: | paulvdb | | Posted: | Dec 29, 2019 00:07 | | Subject: | Re: Inventory Change Request for Set 8143-1 | | Viewed: | 30 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, d66n writes:
| | It is my opinion that this should be removed and would be interested to know if you agreed.
|
I do not agree. The set contents have been verified by three different members
since the extra part was added. All three verifications were done from sealed
set contents.
| | I would not expect Lego to supply a spare technic part of such a size
|
What about this as a spare part?
I found that as a spare in this set:
Removal of the extra 2 x 16 plate was attempted unsuccessfully:
https://www.bricklink.com/message.asp?ID=1061609
Although large extra parts are unusual, they do happen.
| | I did not have this part as a spare in my sealed box
|
Extra parts vary by location. Sets packaged in one location may include them,
while sets packaged in another location may not include them. For that reason,
extras are rarely removed from inventories.
In the case of this set, I would not expect the request to be approved.
|
Larger parts are sometimes packed loose in the box especially when they appear
in smaller sets. In those cases an extra is often included.
|
|
| Author: | paulvdb | | Posted: | Dec 28, 2019 05:55 | | Subject: | Re: Inventory Change Request for Set 6349-1 | | Viewed: | 14 times | | Topic: | Inventories Requests | |
| In Inventories Requests, maesehn writes:
| | Please make changes to the following inventory:
* Change 1 Part Yellow {4345 Container, Box 2 x 2 x 2 to 4345a Container, Box 2 x 2 x 2 - Solid Studs}
Comments from Submitter:
Looking at instructions and box shows that container box has solid studs and no mail pattern.
|
I confirmed this in the set in my personal collection. It was bought new sealed
and never mixed with parts from other sets.
|
|
| Author: | paulvdb | | Posted: | Dec 16, 2019 14:48 | | Subject: | Re: Inventory Change Request for Set 70425-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
| In Inventories Requests, ChooChoo_18 writes:
| | Please make changes to the following inventory:
* Delete 1 Part 2436b Black Bracket 1 x 2 - 1 x 4 with Rounded Corners
* Add 1 Part 2436c Black Bracket 1 x 2 - 1 x 4 with Two Rounded Corners at the Bottom
Comments from Submitter:
I'm parting out two copies of this set
|
The submitter of the inventory has checked and confirmed that the wrong variant
was inventoried.
|
|
| Author: | paulvdb | | Posted: | Dec 14, 2019 09:03 | | Subject: | Re: Inventory Change Request for Set 2995-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Change 1 Part Tan {3044 Slope 45 2 x 1 Double - (Undetermined Underside Version) to 3044b Slope 45 2 x 1 Double - with Inside Bar}
Comments from Submitter:
Source: I have only two tan 3044* in the collection of my own sets that have been mixed together and they are both 3044b and come from sets 5918 and this one. Feel free to reject this request if this proof is not enough.
|
We're not as strict with proof for older sets as we are with new sets. And
this is pretty convincing evidence that also fits the timeline for this part.
|
|
| Author: | paulvdb | | Posted: | Dec 14, 2019 07:14 | | Subject: | Re: 3rd black 1x2 plate in set 4819 | | Viewed: | 34 times | | Topic: | Catalog | |
| In Catalog, StormChaser writes:
| | In Catalog, hpoort writes:
| | It is most likely a spare for if the horse is to graze in the field, replacing
the Reddish Brown 1x4.
|
Agree. If my memory is correct, the part in sets with horses usually would have
been a 1 x 2 tile, not a plate . . . but we all know how absolutely unreliable
memories are. By the way, the Peeron inventory for this set shows the 3rd plate
and that inventory was verified twice from sealed contents.
|
They were plates in my memory, but maybe there were tiles in some sets. Generally
a 1x2 brick and plate for horses with saddles. But in this set of course only
a plate would be necessary.
|
|
| Author: | paulvdb | | Posted: | Dec 14, 2019 02:28 | | Subject: | Re: Inventory Change Request for Set 6918-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Add 1 Part 3626cpx302 Yellow Minifigure, Head Male Angry Eyebrows and Scowl, White Pupils Pattern - Hollow Stud (Alternate) (match ID 2)
Comments from Submitter:
Is this now the right way of putting alternate heads on minifigs? I thought notes were written on the minifigs inventory instead. Anyway, I'm doing it like this because there already is another alternate in the inventory for the other head. Source: Set from my own collection that was never mixed with other bricks.
|
Usually we only add a note to the minisifure inventory to indicate that it can
be found with both types of heads. But sometimes a head is not in any (minifigure)
inventories which means that it won't show any known colors in the head's
catalog entry. In such a case we'll add the head as an alternate to the set
inventory so that it will show a known color. This head is already in several
other inventories, so in this case we will only add a note to the minifigure
inventory.
|
|
| Author: | paulvdb | | Posted: | Dec 12, 2019 09:31 | | Subject: | Re: Red eyebrows for cty0164 | | Viewed: | 35 times | | Topic: | Catalog | |
| In Catalog, bje writes:
| | In Catalog, normann1974 writes:
| | I have found from with red eyebrows. Should I change the
minifig or create a new minifigure with red eyebrows? It's possible that
this set and minifig never came with brown eyebrows. The set was inventoried
before the red eyebrow version was identified (by me) a couple of years ago.
Please advise.
/Jan
|
Red eyebrows on mine. My set, hoever, not sealed any longer as it has partly
been parted out. Minifigure is complete and very definitely red eyebrows.
Add a new minifigure and make it an alternate perhaps. The head on mine is
|
Same head on mine (red eyebrows, blocked open stud).
|
|
| Author: | paulvdb | | Posted: | Dec 11, 2019 07:47 | | Subject: | Re: Parts Category Tree | | Viewed: | 38 times | | Topic: | Catalog | |
| In Catalog, yorbrick writes:
| | In Catalog, paulvdb writes:
| | In Catalog, yorbrick writes:
| | the names for torsos are often useless.
|
So you don't know what I'm talking about when I say Mini Upper Part,
No. 4420? It's obviously the one that comes after Mini Upper Part, No. 4419
and before Mini Upper Part, No. 4421.
|
Yep, torsos are fairly useless. However, some of the other parts have fairly
algorithmic names, if only LEGO was consistent (just like BL or any other site
trying to catalogue parts). Plus some of LEGO's names are quite funny.
|
Many of their names make it clear what a part is, especially once you become
a bit more familiar with their naming system. But for printed parts you get names
like those torsos I mentioned in my earlier post. Those are basically useless
if you're looking for a part with a specific print.
|
|
| Author: | paulvdb | | Posted: | Dec 11, 2019 05:05 | | Subject: | Re: Parts Category Tree | | Viewed: | 33 times | | Topic: | Catalog | |
| In Catalog, yorbrick writes:
| | the names for torsos are often useless.
|
So you don't know what I'm talking about when I say Mini Upper Part,
No. 4420? It's obviously the one that comes after Mini Upper Part, No. 4419
and before Mini Upper Part, No. 4421.
|
|
| Author: | paulvdb | | Posted: | Dec 8, 2019 04:17 | | Subject: | Re: Inventory Change Request for Set 42000-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
| In Inventories Requests, LuGuLego writes:
| | Please make changes to the following inventory:
* Add 1 Part 64683pb042 White Technic, Panel Fairing # 3 Small Smooth Long, Side A with LEGO TECHNIC Logo and Red Stripe Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64392pb026 White Technic, Panel Fairing #17 Large Smooth, Side A with 'SMOOTH CURVES', Black, Red and Silver Stripes Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64392pb024 White Technic, Panel Fairing #17 Large Smooth, Side A with Black, Red and Silver Stripes Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64392pb027 White Technic, Panel Fairing #17 Large Smooth, Side A with Black, Red and Silver Stripes Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64392pb025 White Technic, Panel Fairing #17 Large Smooth, Side A with LEGO TECHNIC Logo Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64682pb026 White Technic, Panel Fairing #18 Large Smooth, Side B with 'SMOOTH CURVES', Black, Red and Silver Stripes Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64682pb024 White Technic, Panel Fairing #18 Large Smooth, Side B with Black, Red and Silver Stripes Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64682pb027 White Technic, Panel Fairing #18 Large Smooth, Side B with Black, Red and Silver Stripes Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 64682pb025 White Technic, Panel Fairing #18 Large Smooth, Side B with LEGO TECHNIC Logo Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 11946pb033 White Technic, Panel Fairing #21 Very Small Smooth, Side B with 'FUEL SPEED' Pattern (Sticker) - Set 42000 (Counterpart)
* Add 1 Part 11947pb033 White Technic, Panel Fairing #22 Very Small Smooth, Side A with 'FUEL SPEED' Pattern (Sticker) - Set 42000 (Counterpart)
* Add 2 Part 3069bpb751 White Tile 1 x 2 with Groove with Vehicle Mirror Black Border and Rounded Corners Pattern (Sticker) - Set 42000 (Counterpart)
|
Four of these parts should be red, not white. I changed them to red.
|
|
| Author: | paulvdb | | Posted: | Dec 7, 2019 13:20 | | Subject: | Re: Inventory Change Request for Set 10243-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
| In Inventories Requests, CanadaFirst writes:
| | Please make changes to the following inventory:
* Delete 2 Part 33057 Dark Orange Turkey Drumstick, 20mm with Round Opening on Back
* Add 2 Part 42876 Dark Orange Turkey Drumstick, 22mm with Oval Opening on Back
Comments from Submitter:
Wrong part listed
|
Part 33057 was included in this set when it was first released. Did you find
42876 in a sealed set? In that case it can be added as an alternate.
|
|
| Author: | paulvdb | | Posted: | Nov 30, 2019 02:32 | | Subject: | Re: Inventory Change Request for Set 8454-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Jessev writes:
| | Please make changes to the following inventory:
* Change {118 to 117} Part Black 2780 Technic, Pin with Friction Ridges Lengthwise WITH Center Slots
* Change {3 to 2} Part Light Gray 3713 Technic Bush
* Change {18 to 17} Part Light Gray 4265c Technic Bush 1/2 Smooth
* Change {5 to 4} Part Light Gray 3647 Technic, Gear 8 Tooth Type 1
* Change {8 to 7} Part Light Gray 4274 Technic, Pin 1/2
Comments from Submitter:
I built the set and the parts I used agree with the parts diagram from the side of the box. These 5 items called for 1 or 2 extra parts that happen to be included in the 'Extra Items' area
|
This will make quantities of these parts the same as in Brickset which gets its
data from lego replacement parts. It will also make the inventory a total of
634 parts which is listed on box images that I found.
|
|
| Author: | paulvdb | | Posted: | Nov 17, 2019 01:44 | | Subject: | Re: Inventory Change Request for Set 3468-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | In Inventories Requests, SpaceAge1957 writes:
| | Please make changes to the following inventory:
* Add 41 Part 3010 Black Brick 1 x 4
Comments from Submitter:
Plastic bag packet of ca 41 off Brick 1 x 4 in black. Ca 69g weight.
|
I don't exactly know what you are trying to do here. The image that I found
for this set says that it contains 50 pieces (see attached), which is what the
current inventory has in it. Are you saying that you have a different version
of the set that only has 41 pieces in it?
Cheers,
Randy
|
Based on their post it looks like they just weighed the bag with bricks, divided
by the catalog weight of the 1x4 brick and took off one to compensate for the
weight of the bag. This is not a correct way to determine the quantity of parts
in a bag because weight of parts can change when Lego makes changes to the molds.
If they actually counted the number of bricks in the bag they'd probably
find 50 of them.
|
|
| Author: | paulvdb | | Posted: | Nov 8, 2019 09:16 | | Subject: | Re: Forum Reforms | | Viewed: | 44 times | | Topic: | Suggestions | |
| In Suggestions, Hsousa writes:
| | Hello there, thank you for replying.
However I wanted to know if there's a way of, when clicking on a thread,
displaying the entire thread? There's an additional click on the "Entire
thread on one page" link every time I want to read a thread.
To rephrase, I want to open the foruns in "Compact" mode (done), but open the
threads in "Entire thread on one page". Is it possible?
|
You can click on the text bubble icon in front of the topic title to display
the entire thread on one page.
|
|
| Author: | paulvdb | | Posted: | Nov 8, 2019 04:11 | | Subject: | Re: Inventory Change Request for Set 1296-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, leopard37 writes:
| | Please make changes to the following inventory:
* Change 1 Part {White to Yellow} 3002 Brick 2 x 3
* Change 4 Part {White to Yellow} 6014u Wheel 11mm D. x 12mm, Undetermined Hole Type
Comments from Submitter:
Please see instructions, and picture of built set. No white pieces.
|
The instructions that I see at the LEGO site show white wheels. Where are you
seeing yellow wheels in the instructions? I agree that the set picture shows
yellow wheels, but the inventory is based on the instructions.
Cheers,
Randy
|
There was also another mistake in the inventory. It contains two
instead of just one.
Randy
|
Looks like there is an alternate version of the instructions:
https://www.brickfactory.info/set/index.html
|
Sorry, I thought you were saying the instructions you were looking at showed
only one Light Gray plate.
Btw, the official Lego data on Brickset shows yellow wheels, so I'm inclined
to think the drawings in the instructions are the problem.
|
All photos I've found of built sets show yellow wheels. So I agree that this
must be a mistake in the instructions. That seems more likely than all owners
of this set changing the wheels in their sets.
|
|
| Author: | paulvdb | | Posted: | Nov 6, 2019 07:59 | | Subject: | Re: Inventory Change Request for Set 60004-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Daige writes:
| | Please make changes to the following inventory:
* Add 1 Part 85861 Yellow Plate, Round 1 x 1 with Open Stud
|
This set was redesigned and this part was one of the added parts. You can find
it in the alternate items section of the inventory.
|
| Author: | paulvdb | | Posted: | Nov 5, 2019 23:38 | | Subject: | Re: Inventory Change Request for Set 7752-1 | | Viewed: | 13 times | | Topic: | Inventories Requests | |
| In Inventories Requests, mlbsma writes:
| | Please make changes to the following inventory:
* Add 2 Part 4073 Trans-Red Plate, Round 1 x 1
Comments from Submitter:
This item listed in spare parts but not in the main list.
|
They are in the inventory of the magna guard minifigures.
|
|
| Author: | paulvdb | | Posted: | Oct 30, 2019 05:01 | | Subject: | Re: Inventory Change Request for Minifig sp010 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
| In Inventories Requests, yoshik_cz writes:
| | Hi,
thanks for the info, we heavily argued about this with a colleague of mine.
What can I do to help?
Am I to create new database entry for a minifig here on Bricklink and suggest
the swap in the sets? I am unsure how to name the "new one". Or the admins will
do that?
Regards
Yoshik
|
Randy already took care of this. So you don't have to do anything.
|
|
| Author: | paulvdb | | Posted: | Oct 29, 2019 06:19 | | Subject: | Re: Inventory Change Request for Set 40358-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| In Inventories Requests, jim.harrison204 writes:
| | Please make changes to the following inventory:
* Delete 1 Part 30151b Trans-Clear Brick, Round 2 x 2 x 1 2/3 Dome Top - Hollow Stud
Comments from Submitter:
Hello, I just parted out 50 of this set and there were 0 in total of this Trans-Clear Brick, Round 2 x 2 x 1 2/3 Dome Top - Hollow Stud.
Thanks!
|
The part is clearly shown in set images and instructions. I also checked a build
video that shows it. Did you get an other part instead of this one?
|
|
| Author: | paulvdb | | Posted: | Oct 28, 2019 11:35 | | Subject: | Re: Inventory Change Request for Set 6371-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, maesehn writes:
| | Please make changes to the following inventory:
* Change {1 to 2} Part Blue 3005 Brick 1 x 1
* Change {5 to 4} Part Blue 4070 Brick, Modified 1 x 1 with Headlight
|
I own this set and can confirm that the quantities for these parts in the inventory
are correct. This request will be rejected.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
