Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Admin_Russell | Posted: | Nov 7, 2019 19:16 | Subject: | Re: Inventory Change Request for Set 1296-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, leopard37 writes:
| Please make changes to the following inventory:
* Change 1 Part {White to Yellow} 3002 Brick 2 x 3
* Change 4 Part {White to Yellow} 6014u Wheel 11mm D. x 12mm, Undetermined Hole Type
Comments from Submitter:
Please see instructions, and picture of built set. No white pieces.
|
The instructions that I see at the LEGO site show white wheels. Where are you
seeing yellow wheels in the instructions? I agree that the set picture shows
yellow wheels, but the inventory is based on the instructions.
Cheers,
Randy
|
There was also another mistake in the inventory. It contains two
instead of just one.
Randy
|
Looks like there is an alternate version of the instructions:
https://www.brickfactory.info/set/index.html
|
|
Author: | randyf | Posted: | Nov 7, 2019 19:02 | Subject: | Re: Inventory Change Request for Set 1296-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, leopard37 writes:
| Please make changes to the following inventory:
* Change 1 Part {White to Yellow} 3002 Brick 2 x 3
* Change 4 Part {White to Yellow} 6014u Wheel 11mm D. x 12mm, Undetermined Hole Type
Comments from Submitter:
Please see instructions, and picture of built set. No white pieces.
|
The instructions that I see at the LEGO site show white wheels. Where are you
seeing yellow wheels in the instructions? I agree that the set picture shows
yellow wheels, but the inventory is based on the instructions.
Cheers,
Randy
|
There was also another mistake in the inventory. It contains two
instead of just one.
Randy
|
|
Author: | randyf | Posted: | Nov 7, 2019 18:59 | Subject: | Re: Inventory Change Request for Set 1296-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, leopard37 writes:
| Please make changes to the following inventory:
* Change 1 Part {White to Yellow} 3002 Brick 2 x 3
* Change 4 Part {White to Yellow} 6014u Wheel 11mm D. x 12mm, Undetermined Hole Type
Comments from Submitter:
Please see instructions, and picture of built set. No white pieces.
|
The instructions that I see at the LEGO site show white wheels. Where are you
seeing yellow wheels in the instructions? I agree that the set picture shows
yellow wheels, but the inventory is based on the instructions.
Cheers,
Randy
|
|
Author: | thevarg | Posted: | Nov 7, 2019 18:53 | Subject: | Inventory Change Request for Set 8649-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 32557 Black Technic, Pin Connector Perpendicular Double 3L
|
|
Author: | nickvandenberg | Posted: | Nov 7, 2019 16:32 | Subject: | Re: Inventory Change Request for Set 4777-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, nickvandenberg writes:
| Please make changes to the following inventory:
* Change 1 Minifig {47394pb012 Duplo Figure Lego Ville, Male Castle, Black Legs, Red Chest, Bright Light Orange Arms, Bright Light Orange Hands to 47394pb004 Duplo Figure Lego Ville, Male Castle, Black Legs, Red Chest, Bright Light Orange Arms, Dark Bluish Gray Hands}
Comments from Submitter:
According to the box it seems 47394pb004 (see image), instead of 47394pb012. Perhaps could/should be listed as an alternate minifig.
|
|
|
|
Author: | nickvandenberg | Posted: | Nov 7, 2019 16:31 | Subject: | Inventory Change Request for Set 4777-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Minifig {47394pb012 Duplo Figure Lego Ville, Male Castle, Black Legs, Red Chest, Bright Light Orange Arms, Bright Light Orange Hands to 47394pb004 Duplo Figure Lego Ville, Male Castle, Black Legs, Red Chest, Bright Light Orange Arms, Dark Bluish Gray Hands}
Comments from Submitter:
According to the box it seems 47394pb004 (see image), instead of 47394pb012. Perhaps could/should be listed as an alternate minifig.
|
|
Author: | Brixalotl | Posted: | Nov 7, 2019 15:30 | Subject: | Inventory Change Request for Set 10757-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 42876 Dark Orange Turkey Drumstick, 22mm with Oval Opening on Back (Alternate) (match ID 1)
* Change 1 Part Dark Orange 33057 Turkey Drumstick, 20mm with Round Opening on Back {match ID 0 to 1}
Comments from Submitter:
found both variants during part-out, thanks
|
|
Author: | leopard37 | Posted: | Nov 7, 2019 11:53 | Subject: | Inventory Change Request for Set 1296-1 | Viewed: | 39 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {White to Yellow} 3002 Brick 2 x 3
* Change 4 Part {White to Yellow} 6014u Wheel 11mm D. x 12mm, Undetermined Hole Type
Comments from Submitter:
Please see instructions, and picture of built set. No white pieces.
|
|
Author: | steelant | Posted: | Nov 7, 2019 10:55 | Subject: | Re: Lego Samsonite 704-3 (1962) Canister | Viewed: | 30 times | Topic: | Inventories | |
| Thank you for the help.
So far this is what I have and is in line what you are saying:
- This container should contain 165 pieces (Pretty close to what is in it)
- Mostly if not all CA plastic (correct!)
- Puzzling the inventory together based on "what can be made with this set" info.
I believe I will get to the 165 pieces.... I will upload the inventory as soon
as completed.
PS: This is a picture of the canister.
In Inventories, 62Bricks writes:
| In Inventories, steelant writes:
| I am looking for a brick inventory list for the 1962 Lego Samsonite set 704-3.
I know it should contain 165 pieces, but that is all I know. I looked everywhere....
Can anyone help?
|
Short of someone finding one that is still sealed, we may never know.
Basic Samsonite sets of this era usually included a generic instruction book
that had "ideas" but no part list or indication of the parts included. This set
would just have had mostly red and white bricks (1x2, 2x2 and 2x4), possibly
some trans-clear bricks, and some red windows and doors. It was introduced in
1962, when the bricks and windows would have been made out of cellulose acetate
plastic, but beginning in 1963 they may have been mixed with ABS parts. It would
not have had any wheels or wheel holders, as these were sold in a separate set.
This particular set was sold only through department store catalogs (like Sears).
|
|
|
|
Author: | randyf | Posted: | Nov 6, 2019 18:11 | Subject: | Re: Inventory Change Request for Set 7196-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, Turez writes:
|
also shows 50859b but its inventory has 50859a.
|
I have updated the inventory of this motorcycle to have 50859b since it only
appears in this one set and obviously had the later version.
Cheers,
Randy
|
|
Author: | Turez | Posted: | Nov 6, 2019 16:47 | Subject: | Inventory Change Request for Set 7196-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 61252 Black Plate, Modified 1 x 1 with Clip Horizontal (thick open O clip) (Alternate) (match ID 4)
* Add 2 Part 60470b Black Plate, Modified 1 x 2 with Clips Horizontal (thick open O clips) (Alternate) (match ID 5)
* Change 1 Part Black {50859a Motorcycle Chassis, Short Fairing Mounts and Foot Pegs to 50859b Motorcycle Chassis, Long Fairing Mounts and Foot Pegs}
* Change 2 Part Black 6019 Plate, Modified 1 x 1 with Clip Horizontal (thick open U clip) {match ID 0 to 4}
* Change 2 Part Black 60470 Plate, Modified 1 x 2 with Clips Horizontal (thick open U clips) {match ID 0 to 5}
* Change 6 Part Dark Bluish Gray {4460 Slope 75 2 x 1 x 3 - (Undetermined Stud Type Version) to 4460b Slope 75 2 x 1 x 3 - Hollow Stud}
Comments from Submitter:
Source: Set from my own collection which was bought new and not mixed with other sets.
For future reference: My set came with 4599b Black Tap 1 x 1 without Hole in Nozzle End, 2343 Pearl Gold Minifigure Utensil Goblet and 32064 Green Technic, Brick 1 x 2 with Axle Hole.
50859a/b: All photos and videos I have found at brickshelf, youtube and ebay show 50859b. Moreover, the image of
also shows 50859b but its inventory has 50859a. So we have some kind of proof that these variants were not properly distinguished.
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=3905476
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=3868189
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=3937722
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=3956117
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=4061669
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=4249073
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=4161525
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=4901545
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5508552
https://youtu.be/FXc_v2HvGkM?t=36
https://youtu.be/BBBhcZDMmEM?t=159
https://youtu.be/R8NdZ4KSbvs?t=193
|
|
Author: | randyf | Posted: | Nov 6, 2019 16:45 | Subject: | Re: Inventory Change Request for Set 60011-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Extra)
Comments from Submitter:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=534682
|
|
|
|
Author: | randyf | Posted: | Nov 6, 2019 16:42 | Subject: | Inventory Change Request for Set 60011-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Extra)
Comments from Submitter:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=534682
|
|
Author: | Hygrotus | Posted: | Nov 6, 2019 13:06 | Subject: | Re: Set 60161 | Viewed: | 28 times | Topic: | Inventories | |
| In Inventories, Zab3uk75 writes:
| Hi,
Does any one know how many bags of parts that there should be in this set #60161
Jungle Exploration Site.
Thanks
June
|
https://youtu.be/5zXWY-nGLXs?t=19
|
Author: | Zab3uk75 | Posted: | Nov 6, 2019 12:57 | Subject: | Set 60161 | Viewed: | 52 times | Topic: | Inventories | Status: | Open | |
| Hi,
Does any one know how many bags of parts that there should be in this set #60161
Jungle Exploration Site.
Thanks
June
|
Author: | paulvdb | Posted: | Nov 6, 2019 07:59 | Subject: | Re: Inventory Change Request for Set 60004-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
| In Inventories Requests, Daige writes:
| Please make changes to the following inventory:
* Add 1 Part 85861 Yellow Plate, Round 1 x 1 with Open Stud
|
This set was redesigned and this part was one of the added parts. You can find
it in the alternate items section of the inventory.
|
Author: | Daige | Posted: | Nov 6, 2019 07:16 | Subject: | Inventory Change Request for Set 60004-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 85861 Yellow Plate, Round 1 x 1 with Open Stud
|
|
Author: | Hygrotus | Posted: | Nov 6, 2019 06:19 | Subject: | Inventory Change Request for Book mag2019sw11pl | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Set 911838-1 Probe Droid foil pack #2 (Alternate) (match ID 1)
* Add 1 Set 911840-1 Droideka foil pack (Alternate) (match ID 1)
* Change 1 Set 911833-1 Imperial Shuttle foil pack {match ID 0 to 1}
Comments from Submitter:
Beside main foil pack (Anakin's Jedi Interceptor) in this issue was added second one extra foil pack. In my copy it was OImperial Shuttle which is already in inventory. But in diffrent copies second one foil pack was added different one. Found information on polish blog (in polish unfortunetly) about other possible ones to be found with this issue beside Anakin's Jedi Interceptor. So you could buy this magazin with Anakin's Jedi Interceptor and second foil pack which could diffrent ones. Have no idea if there could be more possibilites. Those were confirmed by diffrent people from different parts of country.
http://legookazje.blogspot.com/2019/10/magazyn-lego-star-wars-112019-juz.html#comment-form
|
|
Author: | paulvdb | Posted: | Nov 5, 2019 23:38 | Subject: | Re: Inventory Change Request for Set 7752-1 | Viewed: | 13 times | Topic: | Inventories Requests | |
| In Inventories Requests, mlbsma writes:
| Please make changes to the following inventory:
* Add 2 Part 4073 Trans-Red Plate, Round 1 x 1
Comments from Submitter:
This item listed in spare parts but not in the main list.
|
They are in the inventory of the magna guard minifigures.
|
|
Author: | Adjour | Posted: | Nov 5, 2019 20:45 | Subject: | Re: Sticky/ oily vintage wheels...trash? | Viewed: | 32 times | Topic: | Catalog | |
| In Help, randyf writes:
| In Help, Adjour writes:
| Anyone know why this happens? I notice the also melt the bricks they are sitting
against, so I'm presuming some sort of chemical reaction.
|
The LEGO wheels are most likely made from styrene-butadiene rubber (SBR). To
process SBR, plasticizers are usually added to it to help with the flow of the
material into the molds (they literally make the SBR more plastic). These plasticizers
usually include some type of mineral oil derived from petroleum and some type
of ester (a type of chemical compound). Over time, these plasticizers can leach
out of the SBR under certain storage conditions. You are most likely seeing and
feeling mostly the mineral oil, but I would absolutely think that the ester is
also leaching out with the mineral oil. Why? Because esters can dissolve ABS.
Cheers,
Randy
|
Great to know, thank you Randy
Visually, they absolutely look like they are covered in mineral oil. These were
not commingled (they were in a set box/clean) so they are not covered in dirt,
the others I encounter were covered in *stuff*
I've run into various amounts of the tacky feel, so I would imagine that
is the second compound coming out in various amounts.
|
|
Author: | randyf | Posted: | Nov 5, 2019 19:24 | Subject: | Re: Sticky/ oily vintage wheels...trash? | Viewed: | 41 times | Topic: | Catalog | |
| In Help, Adjour writes:
| Anyone know why this happens? I notice the also melt the bricks they are sitting
against, so I'm presuming some sort of chemical reaction.
|
The LEGO wheels are most likely made from styrene-butadiene rubber (SBR). To
process SBR, plasticizers are usually added to it to help with the flow of the
material into the molds (they literally make the SBR more plastic). These plasticizers
usually include some type of mineral oil derived from petroleum and some type
of ester (a type of chemical compound). Over time, these plasticizers can leach
out of the SBR under certain storage conditions. You are most likely seeing and
feeling mostly the mineral oil, but I would absolutely think that the ester is
also leaching out with the mineral oil. Why? Because esters can dissolve ABS.
Cheers,
Randy
|
|
Author: | mlbsma | Posted: | Nov 5, 2019 18:52 | Subject: | Inventory Change Request for Set 7752-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 4073 Trans-Red Plate, Round 1 x 1
Comments from Submitter:
This item listed in spare parts but not in the main list.
|
|
Author: | xboxnissan | Posted: | Nov 5, 2019 17:45 | Subject: | Personal Inventory, Shareable | Viewed: | 81 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Just like Discogs where you can put into an inventory what you have (they name
it collection), it would be interesting to have such a feature.
It's basically a display without having to sell (i.e. right now you have
to be a seller to have an inventory).
I'm using currently wish list of the set I got at the moment and transfered
them into another wish list once I was done rebuilding it... I mean it works
but it's not exactly what wish lists are for!
|
|
Author: | Kenopolis | Posted: | Nov 5, 2019 16:04 | Subject: | Inventory Change Request for Set 7512-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part clikits021b Trans-Very Lt Blue Clikits Part Separator with Heart, Flower and Star on Handle
Comments from Submitter:
This set has the flower heart and star version of the tool.
This is from a new set that was parted out.
|
Author: | phinto | Posted: | Nov 5, 2019 14:06 | Subject: | Re: Bricklink Discord | Viewed: | 70 times | Topic: | Suggestions | |
| In Suggestions, phinto writes:
| In Suggestions, DerekThomasp89 writes:
| I recently upgraded the discord channel to add a few new channels, were still
looking for members to make this server a success.
Please come on over and join us we don't bite.. hard
https://discord.gg/xhTDz3s
|
hey... I need a reinvite for bricklink server
|
https://discord.gg/XtQryK7
|
|
Author: | axaday | Posted: | Nov 5, 2019 14:02 | Subject: | Re: Sticky/ oily vintage wheels...trash? | Viewed: | 40 times | Topic: | Catalog | |
| In Help, Adjour writes:
| Anyone know why this happens? I notice the also melt the bricks they are sitting
against, so I'm presuming some sort of chemical reaction.
I'm guessing heat? I've run into this 3 times now one the lots also had
heat warped baseplates. I've never seen it on my own/original lego which
has never experienced a hot garage.
Are they trash? Can I clean them?
I just got some in light grey and was pretty stoked (only came in 3
sets) and they are awful gooey messes, I have more on the way and I don't
want it to be a total loss. The weird color on a common part is so neat in person.
Thanks everyone
Crystal
|
I often find it in old, old sealed sets. Sometimes the tire is ruined and sometimes
I don't think so. I think it can be fixed with armor-all, but I just sell
them as-is with a comment.
|
|
Author: | cptnruthless | Posted: | Nov 5, 2019 13:13 | Subject: | Inventory Change Request for Set 60013-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61483c03 Light Bluish Gray Technic Pin with Dual Wheels Holder with White Wheels and Black Tires (61483 / 4624 / 59895) (Counterpart)
|
Author: | cptnruthless | Posted: | Nov 5, 2019 13:12 | Subject: | Inventory Change Request for Set 7734-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61483c02 Light Bluish Gray Technic Pin with Dual Wheels Holder with White Wheels and Black Tires (61483 / 4624 / 3139) (Counterpart)
|
Author: | cptnruthless | Posted: | Nov 5, 2019 13:12 | Subject: | Inventory Change Request for Set 60022-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61483c01 Light Bluish Gray Technic Pin with Dual Wheels Holder with Light Bluish Grey Wheels and Black Tires (61483 / 4624 / 59895) (Counterpart)
|
Author: | cptnruthless | Posted: | Nov 5, 2019 13:10 | Subject: | Inventory Change Request for Set 60021-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61483c01 Light Bluish Gray Technic Pin with Dual Wheels Holder with Light Bluish Grey Wheels and Black Tires (61483 / 4624 / 59895) (Counterpart)
|
Author: | cptnruthless | Posted: | Nov 5, 2019 13:09 | Subject: | Inventory Change Request for Set 75928-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61483c01 Light Bluish Gray Technic Pin with Dual Wheels Holder with Light Bluish Grey Wheels and Black Tires (61483 / 4624 / 59895) (Counterpart)
|
Author: | cptnruthless | Posted: | Nov 5, 2019 13:09 | Subject: | Inventory Change Request for Set 31011-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61483c01 Light Bluish Gray Technic Pin with Dual Wheels Holder with Light Bluish Grey Wheels and Black Tires (61483 / 4624 / 59895) (Counterpart)
|
Author: | cptnruthless | Posted: | Nov 5, 2019 13:08 | Subject: | Inventory Change Request for Set 60116-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61483c01 Light Bluish Gray Technic Pin with Dual Wheels Holder with Light Bluish Grey Wheels and Black Tires (61483 / 4624 / 59895) (Counterpart)
|
Author: | cptnruthless | Posted: | Nov 5, 2019 13:07 | Subject: | Inventory Change Request for Set 60102-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61483c01 Light Bluish Gray Technic Pin with Dual Wheels Holder with Light Bluish Grey Wheels and Black Tires (61483 / 4624 / 59895) (Counterpart)
|
Author: | cptnruthless | Posted: | Nov 5, 2019 13:07 | Subject: | Inventory Change Request for Set 60104-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61483c01 Light Bluish Gray Technic Pin with Dual Wheels Holder with Light Bluish Grey Wheels and Black Tires (61483 / 4624 / 59895) (Counterpart)
|
Author: | cptnruthless | Posted: | Nov 5, 2019 13:06 | Subject: | Inventory Change Request for Set 60101-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61483c01 Light Bluish Gray Technic Pin with Dual Wheels Holder with Light Bluish Grey Wheels and Black Tires (61483 / 4624 / 59895) (Counterpart)
|
Author: | cptnruthless | Posted: | Nov 5, 2019 13:05 | Subject: | Inventory Change Request for Set 3182-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 61483c01 Light Bluish Gray Technic Pin with Dual Wheels Holder with Light Bluish Grey Wheels and Black Tires (61483 / 4624 / 59895) (Counterpart)
|
|
Author: | Adjour | Posted: | Nov 5, 2019 12:45 | Subject: | Re: Sticky/ oily vintage wheels...trash? | Viewed: | 33 times | Topic: | Catalog | |
| In Help, runner.caller writes:
| In Help, Adjour writes:
| Anyone know why this happens? I notice the also melt the bricks they are sitting
against, so I'm presuming some sort of chemical reaction.
I'm guessing heat? I've run into this 3 times now one the lots also had
heat warped baseplates. I've never seen it on my own/original lego which
has never experienced a hot garage.
Are they trash? Can I clean them?
I just got some in light grey and was pretty stoked (only came in 3
sets) and they are awful gooey messes, I have more on the way and I don't
want it to be a total loss. The weird color on a common part is so neat in person.
Thanks everyone
Crystal
|
Weird! I've encountered oily tires before, but just assumed it was a coating
to help them pop out of the mold at the factory or a light coating to help guard
against dry rot.
I've seen the leaching before in my fishing tackle box when old plastic "twister
tails" would start to leach through the plastic baggies and even start to melt
the plastic in the utility box they were inside.
I didn't know this could happen to lego tires too!? Makes me nervous about
my stored childhood sets.
So too much air, and they dry out and get dry-rot, not enough, and they melt.
Nice....
I'll note that the tackle box spent many a thermal cycle in a garage, whereas
the lego temps have always been more stable.
|
Don't stress too much, I have TONS of old tires and I've only found this
buying lego from people who were obviously not collectors. I strongly suspect
some sort of really bad storage (decades in a hot cold hot cold garage or storage
unit (which are live ovens)
I think I'm going to toss these.
|
|
Author: | Adjour | Posted: | Nov 5, 2019 12:42 | Subject: | Re: Sticky/ oily vintage wheels...trash? | Viewed: | 34 times | Topic: | Catalog | |
| In Help, mfav writes:
Honestly, I'm inclined to go this route, as I said in the OP, I've seen
whatever is "on" these tires MELT the neighboring bricks. My gut tells
me whatever is going on here is bad JuJu.
|
|
Author: | calebfishn | Posted: | Nov 5, 2019 12:32 | Subject: | Re: Sticky/ oily vintage wheels...trash? | Viewed: | 33 times | Topic: | Catalog | |
| In Help, runner.caller writes:
| In Help, Adjour writes:
| Anyone know why this happens? I notice the also melt the bricks they are sitting
against, so I'm presuming some sort of chemical reaction.
I'm guessing heat? I've run into this 3 times now one the lots also had
heat warped baseplates. I've never seen it on my own/original lego which
has never experienced a hot garage.
Are they trash? Can I clean them?
I just got some in light grey and was pretty stoked (only came in 3
sets) and they are awful gooey messes, I have more on the way and I don't
want it to be a total loss. The weird color on a common part is so neat in person.
Thanks everyone
|
|
|
Weird! I've encountered oily tires before, but just assumed it was a coating
to help them pop out of the mold at the factory or a light coating to help guard
against dry rot.
I've seen the leaching before in my fishing tackle box when old plastic "twister
tails" would start to leach through the plastic baggies and even start to melt
the plastic in the utility box they were inside.
I didn't know this could happen to lego tires too!? Makes me nervous about
my stored childhood sets.
So too much air, and they dry out and get dry-rot, not enough, and they melt.
Nice....
I'll note that the tackle box spent many a thermal cycle in a garage, whereas
the lego temps have always been more stable.
|
I don't think tackle box trouble has much to do with hot and cold temperature.
All of your soft plastic lures and worms seem to be a vinyl plastic that will
react strongly with styrene plastic. Fishing boxes of that material work well
for weights and hooks, and usually don't interact with the paint on your
jigs, bu they are trouble if they come into contact with . Good quality tackle
storage should not be that shiny clear styrene plastic.
|
|
Author: | axaday | Posted: | Nov 5, 2019 12:01 | Subject: | Re: Inventory Change Request for Set 8279-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| By the way, since you go through a lot of older sealed sets, you should document
the whole unboxing process for them. That kind of information is not easy to
find for a lot of the sets. Let me know if you would like me to send you example
images of how I do it for older sets that I go through.
Cheers,
Randy
|
Yes I have no idea what all that would entail.
|
|
Author: | runner.caller | Posted: | Nov 5, 2019 10:01 | Subject: | Re: Sticky/ oily vintage wheels...trash? | Viewed: | 46 times | Topic: | Catalog | |
| In Help, Adjour writes:
| Anyone know why this happens? I notice the also melt the bricks they are sitting
against, so I'm presuming some sort of chemical reaction.
I'm guessing heat? I've run into this 3 times now one the lots also had
heat warped baseplates. I've never seen it on my own/original lego which
has never experienced a hot garage.
Are they trash? Can I clean them?
I just got some in light grey and was pretty stoked (only came in 3
sets) and they are awful gooey messes, I have more on the way and I don't
want it to be a total loss. The weird color on a common part is so neat in person.
Thanks everyone
Crystal
|
Weird! I've encountered oily tires before, but just assumed it was a coating
to help them pop out of the mold at the factory or a light coating to help guard
against dry rot.
I've seen the leaching before in my fishing tackle box when old plastic "twister
tails" would start to leach through the plastic baggies and even start to melt
the plastic in the utility box they were inside.
I didn't know this could happen to lego tires too!? Makes me nervous about
my stored childhood sets.
So too much air, and they dry out and get dry-rot, not enough, and they melt.
Nice....
I'll note that the tackle box spent many a thermal cycle in a garage, whereas
the lego temps have always been more stable.
|
|
|
|
Author: | SylvainLS | Posted: | Nov 5, 2019 08:55 | Subject: | Inventory Change Request for Set 21318-1 | Viewed: | 39 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 32606 Bright Light Orange Friends Accessories Flower with 7 Thick Petals and Pin (Extra)
* Add 1 Part 3070b Dark Green Tile 1 x 1 with Groove (3070) (Extra)
* Add 1 Part 87585 Reddish Brown Minifigure, Utensil Oar / Paddle Reinforced (Extra)
* Add 1 Part 18920 Flat Silver Minifigure, Utensil Scissors (Extra)
* Add 1 Part 30153 Trans-Yellow Rock 1 x 1 Jewel 24 Facet (Extra)
* Change {1 to 4} Part Black 32828 Bar 1L with 1 x 1 Round Plate with Hollow Stud (Extra)
* Change {1 to 2} Part Black 48729b Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Extra)
* Change {1 to 6} Part Bright Green 33183 Carrot Top / Twig (Extra)
* Change {1 to 5} Part Bright Light Orange 33183 Carrot Top / Twig (Extra)
* Change {1 to 2} Part White 4502a Minifigure, Plume Feather Small (Extra)
* Change {1 to 3} Part Medium Dark Flesh 3024 Plate 1 x 1 (Extra)
* Change {1 to 3} Part Olive Green 3024 Plate 1 x 1 (Extra)
* Change {1 to 3} Part Black 4073 Plate, Round 1 x 1 (Extra)
* Change {1 to 2} Part Medium Dark Flesh 4073 Plate, Round 1 x 1 (Extra)
* Change {1 to 4} Part Reddish Brown 4073 Plate, Round 1 x 1 (Extra)
* Change {1 to 2} Part Green 24866 Plate, Round 1 x 1 with Flower Edge (5 Petals) (Extra)
* Change {1 to 2} Part Reddish Brown 85861 Plate, Round 1 x 1 with Open Stud (Extra)
* Change {1 to 2} Part Dark Blue 54200 Slope 30 1 x 1 x 2/3 (Extra)
* Change {1 to 2} Part Dark Tan 54200 Slope 30 1 x 1 x 2/3 (Extra)
* Change {1 to 2} Part Reddish Brown 54200 Slope 30 1 x 1 x 2/3 (Extra)
* Change {1 to 2} Part Reddish Brown 3070b Tile 1 x 1 with Groove (3070) (Extra)
* Change {1 to 3} Part Reddish Brown 98138 Tile, Round 1 x 1 (Extra)
* Change {1 to 2} Part Reddish Brown 20482 Tile, Round 1 x 1 with Bar and Pin Holder (Extra)
Comments from Submitter:
From a set that was actually built. (Not totally made up as the original submission seems to be )
Only one negative change I didn’t include: I didn’t get an extra 28974.
2436c is also confirmed as the only variant I got.
For 2417 and 13183 for the canopies: they come in 5+5 unnumbered bags.
Each bag has 11x BGreen (resp. BLO) + 7x Dark Green (resp. Dark Orange) 2417 and 10x BGreen (resp. BLO) 13183.
The instructions list all the 2417 but only 45x 13183.
That makes 5x 13183 as Extra in each colour (one per bag). (+1 for BGreen as one is needed for the carrot in the crate.)
Note though that the build of the canopy only needs 41x 13183 and 53x BGreen/BLO 2417. But as I understand the “let’s match LEGO’s inventory” policy, the remaining ones are not Extra.
|
|
Author: | Turez | Posted: | Nov 5, 2019 05:59 | Subject: | 772 Brick 1 x 2 x 2 without Inside Axle Holde | Viewed: | 114 times | Topic: | Catalog | Status: | Open | |
| Hello everyone,
* | | 772 Brick 1 x 2 x 2 without Inside Axle Holder or Stud Holder Parts: Brick Marked for Deletion |
I came across this brick while checking the inventory of 7623
and I am wondering, does this part variant actually exist? I do not have it in
my collection and I also haven't found a photo showing the bottom (BL doesn't
have one too). Moreover, the quantities for sale are very low. I have asked four
sellers to check this variant. Two of them replied instantly and said their parts
are 3245b/c. One seller didn't answer but moved his parts to 3245b/c and
one seller didn't react at all. Based on that it is very likely that the
other parts for sale are also sorted incorrectly. But I don't know how to
go on with this thing now. How can one be sure that this variant actually does
not exist?
(Yes, there is a printed brick but I am talking about the plain variant.)
Regards
Jonas
|
|
Author: | popsicle | Posted: | Nov 5, 2019 01:24 | Subject: | Re: Sticky/ oily vintage wheels...trash? | Viewed: | 79 times | Topic: | Catalog | |
| In Help, popsicle writes:
| In Help, Adjour writes:
| Anyone know why this happens? I notice the also melt the bricks they are sitting
against, so I'm presuming some sort of chemical reaction.
I'm guessing heat? I've run into this 3 times now one the lots also had
heat warped baseplates. I've never seen it on my own/original lego which
has never experienced a hot garage.
Are they trash? Can I clean them?
|
I believe Lego uses Styrene-Butadiene Styrene (SBS rubber) for their tires. Pretty
much the same material used on your sneakers like vans or converse. The edging
around the bottom of the shoe, if you’ve ever had to clean them. Also used on
many of today’s automotive parts such as rubber molding, trim, etc.
Knowing this, you should be able to determine what products you could use to
clean and/or treat the tires, to stay stoked
|
Remembering the proclamations you made of placing me on your ignore list, if
you've actually done so, I guess this advise is for naught and I'm spinning
my wheels here
Maybe another can pass it on.
|
|
Author: | popsicle | Posted: | Nov 5, 2019 00:54 | Subject: | Re: Sticky/ oily vintage wheels...trash? | Viewed: | 83 times | Topic: | Catalog | |
| In Help, Adjour writes:
| Anyone know why this happens? I notice the also melt the bricks they are sitting
against, so I'm presuming some sort of chemical reaction.
I'm guessing heat? I've run into this 3 times now one the lots also had
heat warped baseplates. I've never seen it on my own/original lego which
has never experienced a hot garage.
Are they trash? Can I clean them?
|
I believe Lego uses Styrene-Butadiene Styrene (SBS rubber) for their tires. Pretty
much the same material used on your sneakers like vans or converse. The edging
around the bottom of the shoe, if you’ve ever had to clean them. Also used on
many of today’s automotive parts such as rubber molding, trim, etc.
Knowing this, you should be able to determine what products you could use to
clean and/or treat the tires, to stay stoked
|
I just got some in light grey and was pretty stoked (only came in 3
sets) and they are awful gooey messes, I have more on the way and I don't
want it to be a total loss. The weird color on a common part is so neat in person.
Thanks everyone
Crystal
|
|
|
Author: | axaday | Posted: | Nov 4, 2019 23:23 | Subject: | Re: Inventory Change Request for Set 9544-1 | Viewed: | 13 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part 3713 Light Bluish Gray Technic Bush (Extra)
* Add 1 Part 3647 Light Bluish Gray Technic, Gear 8 Tooth Type 1 (Extra)
* Add 1 Gear 4230879 (Not Applicable) Sticker for Storage Bin, Education Labels White with Blue Bottom Border - Sheet of 2
* Add 1 Gear 4188023 Dark Gray Storage/Sorting Tray - 8 Compartment
* Change {1 to 2} Part Black 32449 Technic, Liftarm 1 x 4 Thin
|
I forgot to say "sealed set" before.
|
|
|
Author: | axaday | Posted: | Nov 4, 2019 23:22 | Subject: | Inventory Change Request for Set 9544-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3713 Light Bluish Gray Technic Bush (Extra)
* Add 1 Part 3647 Light Bluish Gray Technic, Gear 8 Tooth Type 1 (Extra)
* Add 1 Gear 4230879 (Not Applicable) Sticker for Storage Bin, Education Labels White with Blue Bottom Border - Sheet of 2
* Add 1 Gear 4188023 Dark Gray Storage/Sorting Tray - 8 Compartment
* Change {1 to 2} Part Black 32449 Technic, Liftarm 1 x 4 Thin
|
|
Author: | Adjour | Posted: | Nov 4, 2019 23:20 | Subject: | Sticky/ oily vintage wheels...trash? | Viewed: | 165 times | Topic: | Catalog | Status: | Open | |
| Anyone know why this happens? I notice the also melt the bricks they are sitting
against, so I'm presuming some sort of chemical reaction.
I'm guessing heat? I've run into this 3 times now one the lots also had
heat warped baseplates. I've never seen it on my own/original lego which
has never experienced a hot garage.
Are they trash? Can I clean them?
I just got some in light grey and was pretty stoked (only came in 3
sets) and they are awful gooey messes, I have more on the way and I don't
want it to be a total loss. The weird color on a common part is so neat in person.
Thanks everyone
Crystal
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|