Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | yorbrick | Posted: | Jul 9, 2019 09:26 | Subject: | Re: Benny's torso 973pb1652c02 | Viewed: | 36 times | Topic: | Catalog | |
| | You just said it has two arms, but it doesn't unless you are counting the
unattached robot arm and claw.
|
I make that two arms.
| The catalog picture for a minifigure shows the
minifigure assembled. Most catalog pictures for sets show the set assembled.
But your customers are not expecting you to take what Lego supplied and assemble
it for them like the picture.
|
I agree. Most customers buying new parts expect me to take the new parts as supplied
by LEGO and send those. They do not expect me to assemble them. But I cannot
sell the parts that LEGO supplied here, I have to sell either a combination of
them or pull them apart. There is no option to sell it as it was originally supplied.
It is the inconsistency that is a problem. Going back to the sprues, LEGO did
not intend them to be used according to the pictures of the sets. But BL catalogues
these parts as coming on a sprue. They are listed as coming that way in the set,
whether or not all the parts are needed. There is an option to sell the parts
connected to a sprue (or in a bag) as supplied or sell the parts individually.
Whereas here, they are not listed as they come in the set. There is no option
to sell the parts as supplied.
|
|
Author: | axaday | Posted: | Jul 9, 2019 09:06 | Subject: | Re: Benny's torso 973pb1652c02 | Viewed: | 38 times | Topic: | Catalog | |
| In Catalog, yorbrick writes:
| It is what lego supplied. It has two arms, just no robot arm / claw extension.
I don't know if there is a market for it, as it cannot be sold that way.
|
Isn't what Lego supplies what is in the picture, just not all put together?
You just said it has two arms, but it doesn't unless you are counting the
unattached robot arm and claw. The catalog picture for a minifigure shows the
minifigure assembled. Most catalog pictures for sets show the set assembled.
But your customers are not expecting you to take what Lego supplied and assemble
it for them like the picture.
| And there are plenty of listings for torsos without arms, whether there is a
market for them or not. They all get catalogued even though this is not how lego
supply them. Yet these pieces don't get listed as they are supplied - but
do get catalogued if you either add another part or remove some parts.
|
Yes, there are listings for EVERY torso with arms. While Lego never supplied
them with no arms and the market for unattached torsos varies greaty among them,
the point of having every torso in the catalog is that every torso is a discrete
Lego element. The catalog tries to contain every discrete Lego element, but
has always been cautious about having listings for combinations of pieces. A
full minifig, yes. Some big figs and brickbuilt animals now, yes. Combined
turntables that sometimes came assembled in sets, yes. Some combinations that
are hard to take back apart without damage, yes. But some minifig parts in an
obviously incomplete assembly because Lego supplied them? I don't see the
point and it opens a giant can of worms. Did you know that through the 80s and
90s, minifig torsos usually came with their heads attached? Should we have a
listing for each of those head/torso combinations because Lego supplied them
that way? Does anyone really want a head and torso with no hat or legs? Or
a torso with 1 arm and 1 hand? I doubt it unless the price is very low.
|
|
Author: | yorbrick | Posted: | Jul 9, 2019 09:03 | Subject: | Re: What sets could I build from my inventory | Viewed: | 44 times | Topic: | Inventories | |
| In Inventories, szellandor writes:
| Hey guys,
Is there a listing option here to check which complete sets could I be able to
build using the parts in my inventory? If the answer is yes, can I exclude the
parts from my inventory that belong to a complete set I wouldn't want to
take apart for the purpose? I have a crazy amount of spare parts, I'd like
to check wether they could add up to some nice, complete sets
|
https://rebrickable.com/
|
|
Author: | BRICKcycling | Posted: | Jul 9, 2019 09:02 | Subject: | What sets could I build from my inventory | Viewed: | 64 times | Topic: | Inventories | Status: | Open | |
| Hey guys,
Is there a listing option here to check which complete sets could I be able to
build using the parts in my inventory? If the answer is yes, can I exclude the
parts from my inventory that belong to a complete set I wouldn't want to
take apart for the purpose? I have a crazy amount of spare parts, I'd like
to check wether they could add up to some nice, complete sets
|
|
Author: | yorbrick | Posted: | Jul 9, 2019 08:44 | Subject: | Re: Benny's torso 973pb1652c02 | Viewed: | 28 times | Topic: | Catalog | |
| In Catalog, axaday writes:
| In Catalog, yorbrick writes:
| Because at Bricklink you cannot sell the torso assembly as it is supplied by
LEGO. There is not a catalogue entry for the torso, arm and hand and robot arm
without the claw, as supplied by LEGO. To match the catalogue entry, you need
to add the robot arm.
|
Do you really want to sell a torso with 1 arm? Is there is a market for that?
|
It is what lego supplied. It has two arms, just no robot arm / claw extension.
I don't know if there is a market for it, as it cannot be sold that way.
And there are plenty of listings for torsos without arms, whether there is a
market for them or not. They all get catalogued even though this is not how lego
supply them. Yet these pieces don't get listed as they are supplied - but
do get catalogued if you either add another part or remove some parts.
|
|
Author: | axaday | Posted: | Jul 9, 2019 08:12 | Subject: | Re: Benny's torso 973pb1652c02 | Viewed: | 31 times | Topic: | Catalog | |
| In Catalog, yorbrick writes:
| Because at Bricklink you cannot sell the torso assembly as it is supplied by
LEGO. There is not a catalogue entry for the torso, arm and hand and robot arm
without the claw, as supplied by LEGO. To match the catalogue entry, you need
to add the robot arm.
|
Do you really want to sell a torso with 1 arm? Is there is a market for that?
| It implies you have to either add the arm to the torso, or bag them separately
to keep them together, or store them unattached but need to remember to add the
robot arm, and hope the buyer finds the robot arm before complaining that it
is missing the arm.
|
If you attach the arm one time, it is still new according to the rules. That
option is on the table. Bagging them separately and together are both on the
table, together being probably preferable if you are afraid the buyer will not
find the arm.
|
|
Author: | 62Bricks | Posted: | Jul 9, 2019 07:41 | Subject: | Re: Benny's torso 973pb1652c02 | Viewed: | 35 times | Topic: | Catalog | |
| In Catalog, yorbrick writes:
| In Catalog, axaday writes:
| In Catalog, yorbrick writes:
| | Precedence.
All of the other torsos that use
are handled the same way.
|
OK, so it's historical. Will this ever be changed to reflect what is actually
received in a set rather than what is needed for a set, like the debate about
the sprued parts now being the whole sprue rather than the required parts only?
If parting these out it is necessary to assemble them, and I don't want to
assemble them if they later become the individual parts.
|
Please don't assemble ANY of the minifig parts if you are selling it to me.
Why would this imply that anyone wanted you to do that?
|
Because at Bricklink you cannot sell the torso assembly as it is supplied by
LEGO. There is not a catalogue entry for the torso, arm and hand and robot arm
without the claw, as supplied by LEGO. To match the catalogue entry, you need
to add the robot arm.
It implies you have to either add the arm to the torso, or bag them separately
to keep them together, or store them unattached but need to remember to add the
robot arm, and hope the buyer finds the robot arm before complaining that it
is missing the arm.
|
Another illustrative example of why the "consistency" approach doesn't work.
In cases like this, the admins have to choose which practice to be "consistent"
with, which creates inconsistency.
The way to avoid it is to have guidelines that are as simple as possible. "Define
parts based on how they are found in a sealed set" is one simple guideline. If
we always follow that guideline, then the set inventories take care of themselves
and parting out new sets works. If we make an exception, then make more exceptions
because of that first exception, then ultimately ignore the guideline because
"That's they way we've always done it," the guideline has lost its meaning.
When faced with a dilemma like this partly-assembled torso, the decision should
be made in favor of the more basic principle, not later exceptions.
I think it is clear that many of the inconsistencies in the catalog are the result
of implementing ever-more complicated "rules" that are put in place to handle
exceptions rather than basing decisions on a few simple guidelines.
It should surprise nobody that people attracted to Lego are also really into
elaborate systems, but the secret to Lego's success as a system is that it
is not elaborate. Just a few rules create a very flexible system.
|
|
Author: | yorbrick | Posted: | Jul 9, 2019 06:56 | Subject: | Re: Benny's torso 973pb1652c02 | Viewed: | 44 times | Topic: | Catalog | |
| In Catalog, axaday writes:
| In Catalog, yorbrick writes:
| | Precedence.
All of the other torsos that use
are handled the same way.
|
OK, so it's historical. Will this ever be changed to reflect what is actually
received in a set rather than what is needed for a set, like the debate about
the sprued parts now being the whole sprue rather than the required parts only?
If parting these out it is necessary to assemble them, and I don't want to
assemble them if they later become the individual parts.
|
Please don't assemble ANY of the minifig parts if you are selling it to me.
Why would this imply that anyone wanted you to do that?
|
Because at Bricklink you cannot sell the torso assembly as it is supplied by
LEGO. There is not a catalogue entry for the torso, arm and hand and robot arm
without the claw, as supplied by LEGO. To match the catalogue entry, you need
to add the robot arm.
It implies you have to either add the arm to the torso, or bag them separately
to keep them together, or store them unattached but need to remember to add the
robot arm, and hope the buyer finds the robot arm before complaining that it
is missing the arm.
|
|
Author: | axaday | Posted: | Jul 9, 2019 05:45 | Subject: | Re: Benny's torso 973pb1652c02 | Viewed: | 36 times | Topic: | Catalog | |
| In Catalog, yorbrick writes:
| | Precedence.
All of the other torsos that use
are handled the same way.
|
OK, so it's historical. Will this ever be changed to reflect what is actually
received in a set rather than what is needed for a set, like the debate about
the sprued parts now being the whole sprue rather than the required parts only?
If parting these out it is necessary to assemble them, and I don't want to
assemble them if they later become the individual parts.
|
Please don't assemble ANY of the minifig parts if you are selling it to me.
Why would this imply that anyone wanted you to do that?
|
|
Author: | yorbrick | Posted: | Jul 9, 2019 05:28 | Subject: | Re: Benny's torso 973pb1652c02 | Viewed: | 39 times | Topic: | Catalog | |
| | Precedence.
All of the other torsos that use
are handled the same way.
|
OK, so it's historical. Will this ever be changed to reflect what is actually
received in a set rather than what is needed for a set, like the debate about
the sprued parts now being the whole sprue rather than the required parts only?
If parting these out it is necessary to assemble them, and I don't want to
assemble them if they later become the individual parts.
|
|
Author: | randyf | Posted: | Jul 9, 2019 05:12 | Subject: | Re: Benny's torso 973pb1652c02 | Viewed: | 38 times | Topic: | Catalog | |
| In Catalog, yorbrick writes:
| This part is listed as
I have opened seven of the CMF versions and they do not come like this in the
set. The torso comes without the robot arm attached. Is there are reason having
only the assembly in the inventory, and not having it how it actually comes in
the CMF set?
|
Precedence.
All of the other torsos that use
are handled the same way.
https://www.bricklink.com/catalogItemIn.asp?P=62691&in=P
Cheers,
Randy
|
|
Author: | gvbricks | Posted: | Jul 9, 2019 05:09 | Subject: | Inventory Change Request for Gear 50011 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory: [G=50011]
* Add 2 Part 60470b Black Plate, Modified 1 x 2 with Clips Horizontal (thick open O clips) (Alternate) (match ID 2)
* Change 2 Part Black 60470 Plate, Modified 1 x 2 with Clips Horizontal (thick open U clips) {match ID 0 to 2}
|
Author: | yorbrick | Posted: | Jul 9, 2019 04:48 | Subject: | Benny's torso 973pb1652c02 | Viewed: | 82 times | Topic: | Catalog | Status: | Open | |
| This part is listed as
I have opened seven of the CMF versions and they do not come like this in the
set. The torso comes without the robot arm attached. Is there are reason having
only the assembly in the inventory, and not having it how it actually comes in
the CMF set?
|
|
Author: | randyf | Posted: | Jul 8, 2019 19:24 | Subject: | Inventory Change Request for Set 1386-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part clikits040 Trans-Clear Clikits Cord, Jelly String with 2 Caps - 170mm - top attachment (match ID 1)
* Delete 1 Part clikits008 Trans-Dark Pink Clikits Bead, Ring Thick Small Double with 2 Pins (match ID 2)
* Change 1 Part {Dark Pink to Magenta} clikits001 Clikits Icon, Heart 2 x 2 Large with Pin
* Change 1 Part {Light Blue to Sky Blue} clikits006 Clikits Icon, Star 2 x 2 Large with Pin
* Change 1 Part {Medium Orange to Trans-Light Orange} clikits081 Clikits Flexy Film, Flower 10 Petals 4 x 4 with Raised Border
* Change 1 Part Trans-Pink clikits040 Clikits Cord, Jelly String with 2 Caps - 170mm - top attachment {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Trans-Pink clikits008 Clikits Bead, Ring Thick Small Double with 2 Pins {Alternate to Regular} {match ID 2 to 0}
Comments from Submitter:
From sealed set contents.
|
|
Author: | randyf | Posted: | Jul 8, 2019 18:48 | Subject: | Re: Inventory Change Request for Set 7531-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 1 Part clikits018 Trans-Dark Pink Clikits Cord, Jelly String with 2 Caps - 375mm - top attachment (Alternate) (match ID 1)
* Change 1 Part Trans-Pink clikits018 Clikits Cord, Jelly String with 2 Caps - 375mm - top attachment {match ID 0 to 1}
Comments from Submitter:
My set contained dark. Much too late for a sealed pic, but I've had it under control since opening it.
|
The set probably always contained Trans-Dark Pink. Since your set was sealed
and the original inventory has had so many problems corrected in it over time,
I think I will remove the Trans-Pink one altogether. If a Trans-Pink one is ever
found in the future, we can add it back in.
Cheers,
Randy
|
|
Author: | Mistress_Lisa | Posted: | Jul 8, 2019 18:02 | Subject: | Re: From Champ to Loser | Viewed: | 145 times | Topic: | Suggestions | |
| In Suggestions, superchicken77 writes:
| I have no idea what this is about. Can anyone enlighten me?
In Suggestions, bwes writes:
| You can buy the loser in my shop
|
|
Maybe because the US women won the world cup by beating Netherlands 2-0?
So perhaps there are some soccer players in his inventory?
Lisa
|
|
Author: | Turez | Posted: | Jul 8, 2019 17:17 | Subject: | Inventory Change Request for Set 8022-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Light Gray {3650a Technic, Gear 24 Tooth Crown (1st Version - Not Reinforced) to 3650b Technic, Gear 24 Tooth Crown (2nd Version - Reinforced)}
Comments from Submitter:
I didn't find photos of sealed set contents here. However, based on my recent inventory change requests, I think the transition from 3650a to 3650b is quite clear now.
- 3650a was included in sets until 1991. We have proof that two sets (8074 and 8856) released in 1991 came with 3650a in early and 3650b in later copies.
- 3650b was included in a copy of set 8837 which was produced in March 1992.
- During my research, I didn't find 3650a in any set released after 1991.
(If this request is accepted, I will continue with the remaining wrong and undetermined entries of this part.)
|
|
Author: | axaday | Posted: | Jul 8, 2019 17:07 | Subject: | Re: From Champ to Loser | Viewed: | 93 times | Topic: | Suggestions | |
| In Suggestions, superchicken77 writes:
| I have no idea what this is about. Can anyone enlighten me?
In Suggestions, bwes writes:
| You can buy the loser in my shop
|
|
Care Bears 2?
|
Author: | axaday | Posted: | Jul 8, 2019 16:32 | Subject: | Inventory Change Request for Set 7531-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part clikits018 Trans-Dark Pink Clikits Cord, Jelly String with 2 Caps - 375mm - top attachment (Alternate) (match ID 1)
* Change 1 Part Trans-Pink clikits018 Clikits Cord, Jelly String with 2 Caps - 375mm - top attachment {match ID 0 to 1}
Comments from Submitter:
My set contained dark. Much too late for a sealed pic, but I've had it under control since opening it.
|
Author: | superchicken77 | Posted: | Jul 8, 2019 16:17 | Subject: | Re: From Champ to Loser | Viewed: | 105 times | Topic: | Suggestions | |
| I have no idea what this is about. Can anyone enlighten me?
In Suggestions, bwes writes:
| You can buy the loser in my shop
|
|
|
Author: | BricksShop | Posted: | Jul 8, 2019 15:17 | Subject: | Inventory Change Request for Set 60068-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 18904c01pb01 Dark Green Alligator / Crocodile with 20 Teeth with Yellow Eyes Pattern with Blue Technic, Pin 1/2
* Add 1 Part 18904 Dark Green Alligator / Crocodile Body with 10 Lower Teeth
* Add 1 Part 18905pb01 Dark Green Alligator / Crocodile Head Upper Jaw with Yellow Eyes Pattern
* Add 1 Part 18906 Dark Green Alligator / Crocodile Tail with Hole
* Add 1 Part 18904c01pb01 Dark Green Alligator / Crocodile with 20 Teeth with Yellow Eyes Pattern with Blue Technic, Pin 1/2 (Alternate)
* Change {1 to 2} Part Blue 4274 Technic, Pin 1/2
Comments from Submitter:
The Crocodile is delivered as single parts according the parts list at the end of instruction #4. The Assembled Crocodile should be added as an alternative part.
|
|
Author: | axaday | Posted: | Jul 8, 2019 13:55 | Subject: | Re: Inventory Change Request for Set 7518-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 2 Part {Orange to (Not Applicable)} clikits076 Clikits Paper, Insert 4 x 4 for Frame clikits011, Flowers Image
Comments from Submitter:
The other papers in Clikits and everywhere are 0-Not Applicable.
|
I was just looking at this part yesterday and saying I needed to get it changed.
Thanks for doing the work for me!
|
Just shoring up for a tsunami.
|
|
Author: | randyf | Posted: | Jul 8, 2019 12:51 | Subject: | Re: Inventory Change Request for Set 7518-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 2 Part {Orange to (Not Applicable)} clikits076 Clikits Paper, Insert 4 x 4 for Frame clikits011, Flowers Image
Comments from Submitter:
The other papers in Clikits and everywhere are 0-Not Applicable.
|
I was just looking at this part yesterday and saying I needed to get it changed.
Thanks for doing the work for me!
|
|
Author: | randyf | Posted: | Jul 8, 2019 12:44 | Subject: | Re: Inventory Change Request for Set 1060-1 | Viewed: | 35 times | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, zorbanyc writes:
| Please make changes to the following inventory:
* Add 6 Part 3031 Light Gray Plate 4 x 4
|
I see that you have a new set for sale in your store. I assume that set is the
source for this request?
|
Maybe some pictures with detail from the 4x4 plates (time area...)?
|
Yes, I would also like to see some images of this.
Cheers,
Randy
|
|
Author: | axaday | Posted: | Jul 8, 2019 11:28 | Subject: | Inventory Change Request for Set 7513-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Orange to (Not Applicable)} clikits076 Clikits Paper, Insert 4 x 4 for Frame clikits011, Flowers Image
Comments from Submitter:
This is to get all papers handled the same way.
|
Author: | axaday | Posted: | Jul 8, 2019 11:25 | Subject: | Inventory Change Request for Set 7518-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part {Orange to (Not Applicable)} clikits076 Clikits Paper, Insert 4 x 4 for Frame clikits011, Flowers Image
Comments from Submitter:
The other papers in Clikits and everywhere are 0-Not Applicable.
|
Author: | elias3 | Posted: | Jul 8, 2019 08:16 | Subject: | Re: Inventory Change Request for Set 1060-1 | Viewed: | 38 times | Topic: | Inventories Requests | |
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, zorbanyc writes:
| Please make changes to the following inventory:
* Add 6 Part 3031 Light Gray Plate 4 x 4
|
I see that you have a new set for sale in your store. I assume that set is the
source for this request?
|
Maybe some pictures with detail from the 4x4 plates (time area...)?
|
|
Author: | randyf | Posted: | Jul 8, 2019 00:24 | Subject: | Inventory Change Request for Set 9788-1 | Viewed: | 38 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 26 Part Black {32064 Technic, Brick 1 x 2 with Axle Hole to 32064c Technic, Brick 1 x 2 with Axle Hole and Inside Side Supports}
* Change 8 Part Red {32064 Technic, Brick 1 x 2 with Axle Hole to 32064c Technic, Brick 1 x 2 with Axle Hole and Inside Side Supports}
* Change 1 Part Yellow {75c19 Hose, Rigid 3mm D. 19L / 15.2cm to 75c16 Hose, Rigid 3mm D. 16L / 12.8cm}
* Change 24 Part Yellow {32064 Technic, Brick 1 x 2 with Axle Hole to 32064c Technic, Brick 1 x 2 with Axle Hole and Inside Side Supports}
Comments from Submitter:
Changes based on sealed set contents from message https://www.bricklink.com/message.asp?ID=1146182
|
|
Author: | bb598 | Posted: | Jul 7, 2019 23:45 | Subject: | Re: 10205 : Parts to be removed from Inventory | Viewed: | 52 times | Topic: | Inventories | |
| In Inventories, Sango85 writes:
| In Inventories, FreeStorm writes:
| In Inventories, Sango85 writes:
| Hello,
I check my locomotive 10205 with Bricklink Inventory and I found differences...
I bought a new loco, and found the same differences...
I think there are errors into the Bricklink Inventory.
Please find the list of the issues.
Best regards,
Julien
|
To confirm the inventory, you can find an unboxing there:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=168313
If I remember correctly, the reason for "extra" parts is because the set
is the same as which is composed of
Some black parts are sort of 'extra' (from 3745-1) because this set is
used to build other locomotives
For example:
-Fred
|
OK, thanks for the explanation, and sorry for the "troubles"... I just wanted
to notice a possible issue, which is not an issue anyway.
Julien
|
The My Own Train locomotive sets 3740 and 3741 were designed to build TWO different
models with full instructions to do so. When building one or the other, there
will be pieces left over.
Here is the page from the instructions showing the alternate build that does
use each of the pieces you show in your original post.
http://lego.brickinstructions.com/03000/3741/013.jpg
These set inventories have stood unchanged for many years because they are accurate
and correct. They were produced and sold by LEGO back before there used to be
intentional Extra Pieces, so every piece in the inventory is needed to build
either the primary or the secondary model.
Also, the packs of colored bricks for these sets --
contain the correct parts to build either the
short locomotive or the long locomotive. When done building one or the other,
there will be different pieces left over, but all of the pieces are needed for
one or the other with no extra pieces at all.
____
|
|
|
Author: | SezaR | Posted: | Jul 7, 2019 23:15 | Subject: | Inventory Change Request for Set 6931-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 6 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 6 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Change 6 Part Light Gray 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
|
Author: | SezaR | Posted: | Jul 7, 2019 18:02 | Subject: | Inventory Change Request for Set 6950-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
|
Author: | Adjour | Posted: | Jul 7, 2019 13:11 | Subject: | Re: help identify this transformer part? | Viewed: | 50 times | Topic: | Catalog | |
| In Catalog, blackballoon writes:
| i saw several similar transformer entries in the catalog but could not figure
out which one to list this as. Can someone kindly help to identify it?
|
I agree with the other poster, this looks like the ones I have for my 9v trains.
|
Author: | Turez | Posted: | Jul 7, 2019 12:25 | Subject: | Re: Inventory Change Request for Set 9736-1 | Viewed: | 12 times | Topic: | Inventories Requests | |
| . |
|
Author: | Turez | Posted: | Jul 7, 2019 12:25 | Subject: | Inventory Change Request for Set 9736-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Light Gray {731c01 Technic, Shock Absorber 6.5L Undetermined Spring Type to 731c05 Technic, Shock Absorber 6.5L - Normal Spring}
Comments from Submitter:
Source: sealed set contents, Ebay completed listing 143177010925.
|
Author: | Turez | Posted: | Jul 7, 2019 11:35 | Subject: | Re: Inventory Change Request for Set 8872-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| . |
|
Author: | Turez | Posted: | Jul 7, 2019 11:33 | Subject: | Inventory Change Request for Set 8872-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 3 Part Light Gray {3650a Technic, Gear 24 Tooth Crown (1st Version - Not Reinforced) to 3650b Technic, Gear 24 Tooth Crown (2nd Version - Reinforced)}
Comments from Submitter:
Source: sealed set contents, Ebay listing 323437946029 and 254279558851.
Since we have proof now that 3650b already existed in March 1992 (set 8837), I highly doubt that 3650a was ever included here.
|
|
Author: | normann1974 | Posted: | Jul 7, 2019 11:31 | Subject: | Inventory Change Request for Set 79101-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 53451 Black Barb / Claw / Horn - Small (Extra)
* Change 1 Part Black 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Regular to Alternate} {match ID 1 to 1}
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {Alternate to Regular} {match ID 1 to 1}
* Change 1 Part Dark Bluish Gray {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567a Hinge Plate 1 x 2 Locking with 1 Finger on Side with Bottom Groove}
Comments from Submitter:
Found these variants and extra extras during part out.
|
|
Author: | Turez | Posted: | Jul 7, 2019 11:23 | Subject: | Re: Inventory Change Request for Set 8837-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| . |
|
Author: | Turez | Posted: | Jul 7, 2019 11:22 | Subject: | Inventory Change Request for Set 8837-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Gray {3650a Technic, Gear 24 Tooth Crown (1st Version - Not Reinforced) to 3650b Technic, Gear 24 Tooth Crown (2nd Version - Reinforced)}
Comments from Submitter:
Source: sealed set contents.
Photos found on German site Ebay Kleinanzeigen (Ebay Classifieds), listing 1004287617. Fortunately, the batch code 1012 is visible, meaning this copy was produced in early March 1992. Since the release date was May 1992, it is very likely that this set always came with 3650b.
|
|
Author: | zorbanj | Posted: | Jul 7, 2019 08:27 | Subject: | Re: Inventory Change Request for Set 1060-1 | Viewed: | 35 times | Topic: | Inventories Requests | |
| In Inventories Requests, paulvdb writes:
| In Inventories Requests, zorbanyc writes:
| Please make changes to the following inventory:
* Add 6 Part 3031 Light Gray Plate 4 x 4
|
I see that you have a new set for sale in your store. I assume that set is the
source for this request?
|
Yes, that is correct.
|
Author: | FreeStorm | Posted: | Jul 7, 2019 08:07 | Subject: | Re: help identify this transformer part? | Viewed: | 55 times | Topic: | Catalog | |
| In Catalog, blackballoon writes:
| i saw several similar transformer entries in the catalog but could not figure
out which one to list this as. Can someone kindly help to identify it?
|
My guess is this one:
LEGO used several brands for those transformers.
|
Author: | blackballoon | Posted: | Jul 6, 2019 23:19 | Subject: | help identify this transformer part? | Viewed: | 107 times | Topic: | Catalog | Status: | Open | |
| i saw several similar transformer entries in the catalog but could not figure
out which one to list this as. Can someone kindly help to identify it?
|
|
Author: | axaday | Posted: | Jul 6, 2019 21:35 | Subject: | Re: Question For Someone with Underminer Minifies | Viewed: | 43 times | Topic: | Catalog | |
| In Catalog, axaday writes:
|
wears this cape
I am usually a fan of dynamically posed catalog pics, but this time I just can't
tell if this piece is the same cut as a new piece that I need to get into the
catalog. Can someone tell me if the attached pic is the same shape?
|
Seriously, how does autocorrect think that minifies is a word more than minifig
is?
|
|
Author: | axaday | Posted: | Jul 6, 2019 21:33 | Subject: | Question For Someone with Underminer Minifies | Viewed: | 97 times | Topic: | Catalog | Status: | Open | |
|
wears this cape
I am usually a fan of dynamically posed catalog pics, but this time I just can't
tell if this piece is the same cut as a new piece that I need to get into the
catalog. Can someone tell me if the attached pic is the same shape?
|
|
|
Author: | axaday | Posted: | Jul 6, 2019 20:10 | Subject: | Inventory Change Request for Set 7531-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Gear clikits098c01 Trans-Dark Pink Clikits Sorting Tray 14 Compartment
* Delete 1 Gear clikits098 Trans-Dark Pink Clikits Sorting Tray 14 Compartment, Base
* Delete 1 Gear clikits099 Trans-Dark Pink Clikits Sorting Tray 14 Compartment, Lid
Comments from Submitter:
It comes built in the set.
|
Author: | axaday | Posted: | Jul 6, 2019 17:45 | Subject: | Re: Inventory Change Request for Set 7512-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part {Sky Blue to Trans-Very Lt Blue} clikits146 Clikits Tote (25 x 23 x 7 Studs) with 25 Holes
Comments from Submitter:
This is a color cleanup move.
|
|
|
Author: | axaday | Posted: | Jul 6, 2019 17:44 | Subject: | Inventory Change Request for Set 7512-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Sky Blue to Trans-Very Lt Blue} clikits146 Clikits Tote (25 x 23 x 7 Studs) with 25 Holes
Comments from Submitter:
This is a color cleanup move.
|
Author: | axaday | Posted: | Jul 6, 2019 17:24 | Subject: | Re: Inventory Change Request for Set 7512-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part {Sky Blue to Trans-Light Blue} clikits146 Clikits Tote (25 x 23 x 7 Studs) with 25 Holes
Comments from Submitter:
Part of color correction operation
|
|
Don't you mean Trans-Very Light Blue?
|
That’s what I said.
|
|
Author: | randyf | Posted: | Jul 6, 2019 16:28 | Subject: | Re: Inventory Change Request for Set 7512-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part {Sky Blue to Trans-Light Blue} clikits146 Clikits Tote (25 x 23 x 7 Studs) with 25 Holes
Comments from Submitter:
Part of color correction operation
|
|
Don't you mean Trans-Very Light Blue?
|
Author: | axaday | Posted: | Jul 6, 2019 15:45 | Subject: | Re: Inventory Change Request for Set 7512-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 1 Part {Sky Blue to Trans-Light Blue} clikits146 Clikits Tote (25 x 23 x 7 Studs) with 25 Holes
Comments from Submitter:
Part of color correction operation
|
|
|
Author: | axaday | Posted: | Jul 6, 2019 15:44 | Subject: | Inventory Change Request for Set 7512-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Sky Blue to Trans-Light Blue} clikits146 Clikits Tote (25 x 23 x 7 Studs) with 25 Holes
Comments from Submitter:
Part of color correction operation
|
|
Author: | Admin_Russell | Posted: | Jul 6, 2019 12:53 | Subject: | Re: Stickered Assembly numbering BA77pb01 | Viewed: | 47 times | Topic: | Catalog | |
| In Catalog Requests, samsam2 writes:
| Not sure if sequence number for multiple stickered assembly parts from same set
should increment the 'pb01' to 'pb02' rather than from BA76pb01
to BA77pb01. The part I'm questioning is [p=BA77pb01] and if it should actually
become [p=BA76pb02]
|
Only if the brick configuration is exactly the same. In fact, the numbering has
nothing to do with which set it came from. If the brick configuration is the
same as an entry already in the catalog, use that entry's number and increment
the pbxx value by one.
|
|
Author: | samsam2 | Posted: | Jul 6, 2019 12:28 | Subject: | Stickered Assembly numbering BA77pb01 | Viewed: | 48 times | Topic: | Catalog | Status: | Open | |
| Not sure if sequence number for multiple stickered assembly parts from same set
should increment the 'pb01' to 'pb02' rather than from BA76pb01
to BA77pb01. The part I'm questioning is [p=BA77pb01] and if it should actually
become [p=BA76pb02]
|
Author: | odurt | Posted: | Jul 6, 2019 11:33 | Subject: | Inventory Change Request for Set 70143-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 13349 Dark Bluish Gray Wedge 4 x 4 Triple Inverted with Connections between Studs (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 4855 Wedge 4 x 4 Triple Inverted {match ID 0 to 1}
Comments from Submitter:
From the inventory of a one time build. Never disassembled.
|
|
Author: | TakeAbricK | Posted: | Jul 5, 2019 23:50 | Subject: | Inventory Change Request for Set 21000-2 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 6 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
source: Original set, bought Sealed
|
Author: | DrFrag | Posted: | Jul 5, 2019 21:27 | Subject: | Inventory Change Request for Set 41196-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Trans-Neon Orange to Trans-Orange} 22388 Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid (Extra)
Comments from Submitter:
Set contains 1 Trans-Orange Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid, plus 1 spare. The spare is also Trans-Orange, not Trans-Neon Orange.
|
|
Author: | randyf | Posted: | Jul 5, 2019 20:12 | Subject: | Re: Inventory Change Request for Set 7512-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| It looks awful. I wish you had never asked me to do it or I had refused.
|
Yeah, that does look bad. I need to go scrub my eyes.
How does the thin portion of a Trans-Light Blue icon part compare to the color
of this strip? My wife took my strip to work, so I can't do it myself right
now. If you can, take a pic holding both up towards a light source like I showed
you for the Trans-Dark Pink ones. Remember, the Trans-Dark Pink flexy films were
much lighter looking when compared to Trans-Dark Pink icon parts until I held
them to the light looking at similar thicknesses. This may be a similar case
as the strip doesn't quite look like Trans-Very Light Blue.
Cheers,
Randy
|
I was called in to work for a couple of hours to do something super important.
I can check it this evening or tomorrow.
|
Oops. I forgot that I had this set, so I took a look at the flower flexies.
I am torn on what to do about these bluish-green parts, but I think we should
settle for Trans-Very Light Blue like you have suggested. These flexy films are
milkier than some of the other flexies I bought from you which makes the color
harder to nail down since they do not transmit light through them easily. If
the milky layer wasn't on it, it may look closer to Trans-Light Blue, but
as is looks closer to Trans-Very Light Blue for simplicity.
I will approve your requests for these parts.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Jul 5, 2019 18:56 | Subject: | Re: Inventory Change Request for Set 7512-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| It looks awful. I wish you had never asked me to do it or I had refused.
|
Yeah, that does look bad. I need to go scrub my eyes.
How does the thin portion of a Trans-Light Blue icon part compare to the color
of this strip? My wife took my strip to work, so I can't do it myself right
now. If you can, take a pic holding both up towards a light source like I showed
you for the Trans-Dark Pink ones. Remember, the Trans-Dark Pink flexy films were
much lighter looking when compared to Trans-Dark Pink icon parts until I held
them to the light looking at similar thicknesses. This may be a similar case
as the strip doesn't quite look like Trans-Very Light Blue.
Cheers,
Randy
|
I was called in to work for a couple of hours to do something super important.
|
Clogged toilets can be a "bummer".
| I can check it this evening or tomorrow.
|
|
|
Author: | axaday | Posted: | Jul 5, 2019 18:50 | Subject: | Re: Inventory Change Request for Set 7512-1 | Viewed: | 14 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| It looks awful. I wish you had never asked me to do it or I had refused.
|
Yeah, that does look bad. I need to go scrub my eyes.
How does the thin portion of a Trans-Light Blue icon part compare to the color
of this strip? My wife took my strip to work, so I can't do it myself right
now. If you can, take a pic holding both up towards a light source like I showed
you for the Trans-Dark Pink ones. Remember, the Trans-Dark Pink flexy films were
much lighter looking when compared to Trans-Dark Pink icon parts until I held
them to the light looking at similar thicknesses. This may be a similar case
as the strip doesn't quite look like Trans-Very Light Blue.
Cheers,
Randy
|
I was called in to work for a couple of hours to do something super important.
I can check it this evening or tomorrow.
|
|
Author: | randyf | Posted: | Jul 5, 2019 18:13 | Subject: | Re: Inventory Change Request for Set 10116-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 2 Part {Dark Pink to Trans-Pink} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
* Change 2 Part {Aqua to Trans-Very Lt Blue} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
Comments from Submitter:
These are partly transparent and all the flexy films are moving to transparent colors. I will attach reference pics.
|
The pics show this pink flower with a trans-dark pink flexy film. And this "aqua"
flower with another flexy film the same color that I am also changing and a flexy
film called aqua that is a much better fit. And a picture of the two flexy films
I am changing to trans-very light blue with some trans-very light blue plastic
pieces and also trans-light blue.
|
Can you post an image of that pink flower next to Trans-Pink Clikits parts?
Thanks,
Randy
|
That looks better than I expected it would.
|
Beautiful. I will get the pink flower updated. Still going to hold off on the
"aqua" part.
|
|
Author: | randyf | Posted: | Jul 5, 2019 18:11 | Subject: | Re: Inventory Change Request for Set 7512-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| It looks awful. I wish you had never asked me to do it or I had refused.
|
Yeah, that does look bad. I need to go scrub my eyes.
How does the thin portion of a Trans-Light Blue icon part compare to the color
of this strip? My wife took my strip to work, so I can't do it myself right
now. If you can, take a pic holding both up towards a light source like I showed
you for the Trans-Dark Pink ones. Remember, the Trans-Dark Pink flexy films were
much lighter looking when compared to Trans-Dark Pink icon parts until I held
them to the light looking at similar thicknesses. This may be a similar case
as the strip doesn't quite look like Trans-Very Light Blue.
Cheers,
Randy
|
|
Author: | axaday | Posted: | Jul 5, 2019 17:33 | Subject: | Re: Inventory Change Request for Set 10116-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 2 Part {Dark Pink to Trans-Pink} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
* Change 2 Part {Aqua to Trans-Very Lt Blue} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
Comments from Submitter:
These are partly transparent and all the flexy films are moving to transparent colors. I will attach reference pics.
|
The pics show this pink flower with a trans-dark pink flexy film. And this "aqua"
flower with another flexy film the same color that I am also changing and a flexy
film called aqua that is a much better fit. And a picture of the two flexy films
I am changing to trans-very light blue with some trans-very light blue plastic
pieces and also trans-light blue.
|
Can you post an image of that pink flower next to Trans-Pink Clikits parts?
Thanks,
Randy
|
That looks better than I expected it would.
|
|
|
Author: | axaday | Posted: | Jul 5, 2019 17:33 | Subject: | Re: Inventory Change Request for Set 7512-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| It looks awful. I wish you had never asked me to do it or I had refused. |
|
|
Author: | randyf | Posted: | Jul 5, 2019 15:03 | Subject: | Re: Inventory Change Request for Set 9680-1 | Viewed: | 44 times | Topic: | Inventories Requests | |
| In Inventories Requests, xoshimin writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, xoshimin writes:
| Please make changes to the following inventory:
|
Could you please post an image of the cover card for this set? I would like to
see if it differs from the cover card for the 1999 version. If so, we should
probably make a new catalog entry for the set instead of adding all of these
alternates.
Thanks,
Randy
|
|
That front card is different from the 1999 version shown below. I think a new
set entry is going to be the solution to this as they are easy to distinguish
by the part count and theme logo listed on the front. The 1999 version says 804
pieces and has the Dacta logo while the 2003 version says 800 pieces and has
the LEGO educational division logo.
Please submit your set to the catalog as set 9680-2 with the name "Energy Work,
Power Starter Set (2003 Version)". From there, we can start on an inventory of
the set. Could you please send high quality photos of the entire parts list that
was included on the card in your set to inv@bricklink.com?
Thanks,
Randy
|
|
|
Author: | randyf | Posted: | Jul 5, 2019 14:40 | Subject: | Re: Inventory Change Request for Set 10116-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 2 Part {Dark Pink to Trans-Pink} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
* Change 2 Part {Aqua to Trans-Very Lt Blue} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
Comments from Submitter:
These are partly transparent and all the flexy films are moving to transparent colors. I will attach reference pics.
|
The pics show this pink flower with a trans-dark pink flexy film. And this "aqua"
flower with another flexy film the same color that I am also changing and a flexy
film called aqua that is a much better fit. And a picture of the two flexy films
I am changing to trans-very light blue with some trans-very light blue plastic
pieces and also trans-light blue.
|
Can you post an image of that pink flower next to Trans-Pink Clikits parts?
Thanks,
Randy
|
|
Author: | randyf | Posted: | Jul 5, 2019 14:31 | Subject: | Re: Inventory Change Request for Set 7512-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 4 Part {Aqua to Trans-Very Lt Blue} clikits057 Clikits Flexy Film, Strip 2 x 14 with Rounded Ends and 5 Holes
Comments from Submitter:
I am encountering this color in other sets as I go through them. Aqua wasn't an AWFUL color for it, but it is transparent and there is no trans-aqua. Additionally, there is another transparent flexy film that is a much better match for aqua.
|
The pics show this film with another the same color and adjacent with trans-very
light blue plastic pieces. Also trans-light for reference. The other pic shows
this film with another film that is also currently "aqua" that is a much better
match for aqua.
|
Yeah, I bought one of those "aqua" strips from you and was going to get around
to talking about it with you. Have you tried placing it next to the Clikits Trans-Medium
Blue parts that aren't really Trans-Medium Blue but a yet-to-be-added color?
I would be curious to see that image before moving ahead with this.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Jul 5, 2019 13:58 | Subject: | Re: Inventory Change Request for Set 7508-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Oh, that makes sense.
I just noticed that contains both trans-light and trans-medium as
alternates.
|
Are you going to buy that one or should I?
I think we know the answer to the riddle in that set, but proof is always nice.
|
There is a picture that looks tlb to me, so I guess it is in some set.
|
Ahh, very true. I will go ahead and get it. Now I am even more curious.
|
|
Author: | axaday | Posted: | Jul 5, 2019 13:24 | Subject: | Re: Inventory Change Request for Set 7507-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 2 Part {Chrome Pink to Dark Pink} clikits222 Clikits Icon Accent, Foil Heart 3 x 3 with Textured Iridescent Pattern
* Change 2 Part {Light Yellow to Trans-Yellow} clikits046 Clikits Flexy Film, Heart 3 x 3
* Change 3 Part {Pink to Trans-Dark Pink} clikits046 Clikits Flexy Film, Heart 3 x 3
Comments from Submitter:
1 - It matches the dark pink hearts in 7517
2,3 - Bringing them in line with new convention for flexy films, which are semi-transparent.
|
|
|
|
Author: | axaday | Posted: | Jul 5, 2019 13:24 | Subject: | Inventory Change Request for Set 7507-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part {Chrome Pink to Dark Pink} clikits222 Clikits Icon Accent, Foil Heart 3 x 3 with Textured Iridescent Pattern
* Change 2 Part {Light Yellow to Trans-Yellow} clikits046 Clikits Flexy Film, Heart 3 x 3
* Change 3 Part {Pink to Trans-Dark Pink} clikits046 Clikits Flexy Film, Heart 3 x 3
Comments from Submitter:
1 - It matches the dark pink hearts in 7517
2,3 - Bringing them in line with new convention for flexy films, which are semi-transparent.
|
|
Author: | axaday | Posted: | Jul 5, 2019 12:49 | Subject: | Inventory Change Request for Set 7502-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Trans-Dark Pink to Trans-Orange} clikits010 Clikits Cord, Jelly String with 2 Caps - 165mm - side attachment
Comments from Submitter:
I am not attaching a picture because the part's picture is good enough. It is an orange cord with pink caps. I have requested the part, only found in this set, to be changed to say cord with trans-dark pink caps, so to finish it the part in the inventory needs to be changed to trans-orange. I am also including in an omnibus catalog request to move the references.
|
|
Author: | axaday | Posted: | Jul 5, 2019 12:43 | Subject: | Re: Inventory Change Request for Set 7512-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 4 Part {Aqua to Trans-Very Lt Blue} clikits057 Clikits Flexy Film, Strip 2 x 14 with Rounded Ends and 5 Holes
Comments from Submitter:
I am encountering this color in other sets as I go through them. Aqua wasn't an AWFUL color for it, but it is transparent and there is no trans-aqua. Additionally, there is another transparent flexy film that is a much better match for aqua.
|
The pics show this film with another the same color and adjacent with trans-very
light blue plastic pieces. Also trans-light for reference. The other pic shows
this film with another film that is also currently "aqua" that is a much better
match for aqua.
|
|
|
Author: | axaday | Posted: | Jul 5, 2019 12:41 | Subject: | Re: Inventory Change Request for Set 10116-1 | Viewed: | 13 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 2 Part {Dark Pink to Trans-Pink} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
* Change 2 Part {Aqua to Trans-Very Lt Blue} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
Comments from Submitter:
These are partly transparent and all the flexy films are moving to transparent colors. I will attach reference pics.
|
The pics show this pink flower with a trans-dark pink flexy film. And this "aqua"
flower with another flexy film the same color that I am also changing and a flexy
film called aqua that is a much better fit. And a picture of the two flexy films
I am changing to trans-very light blue with some trans-very light blue plastic
pieces and also trans-light blue.
|
|
|
Author: | axaday | Posted: | Jul 5, 2019 12:37 | Subject: | Inventory Change Request for Set 10116-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part {Dark Pink to Trans-Pink} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
* Change 2 Part {Aqua to Trans-Very Lt Blue} clikits053 Clikits Flexy Film, Flower 5 Petals 3 x 3
Comments from Submitter:
These are partly transparent and all the flexy films are moving to transparent colors. I will attach reference pics.
|
|
Author: | axaday | Posted: | Jul 5, 2019 12:36 | Subject: | Inventory Change Request for Set 7512-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part {Aqua to Trans-Very Lt Blue} clikits057 Clikits Flexy Film, Strip 2 x 14 with Rounded Ends and 5 Holes
Comments from Submitter:
I am encountering this color in other sets as I go through them. Aqua wasn't an AWFUL color for it, but it is transparent and there is no trans-aqua. Additionally, there is another transparent flexy film that is a much better match for aqua.
|
|
Author: | axaday | Posted: | Jul 5, 2019 07:15 | Subject: | Re: Inventory Change Request for Set 7508-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Oh, that makes sense.
I just noticed that contains both trans-light and trans-medium as
alternates.
|
Are you going to buy that one or should I?
I think we know the answer to the riddle in that set, but proof is always nice.
|
There is a picture that looks tlb to me, so I guess it is in some set.
|
|
Author: | axaday | Posted: | Jul 5, 2019 06:47 | Subject: | Re: Inventory Change Request for Set 7508-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| Oh, that makes sense.
I just noticed that contains both trans-light and trans-medium as
alternates.
|
Are you going to buy that one or should I?
I think we know the answer to the riddle in that set, but proof is always nice.
|
Go ahead. I am not sure I know the answer to the riddle. If the original was
incorrect, it will be very hard to prove.
|
|
Author: | palenjo | Posted: | Jul 5, 2019 05:26 | Subject: | Re: Inventory Change Request for Set 160-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, palenjo writes:
| Please make changes to the following inventory:
* Add 3 Part 737ac02 Red Plate, Modified 2 x 4 with Train Coupler Open for Magnet with Blue Magnet Coupling, Train - 7mm Cylinder (737a / x547b) (Alternate)
* Add 3 Part 737ac01 Red Plate, Modified 2 x 4 with Train Coupler Open for Magnet with Same Color Magnet Coupling, Train - 7mm Cylinder (737a / x547b) (Alternate)
Comments from Submitter:
In my unopened set the cylinders are short. Don't know if I should suggest it as alternate part or regular part. I have photos, but can't see on this page how to add them. Johan
|
Hi there, Johan!
Did you measure the length of all of the red and blue cylinders to make sure
they were all 7mm long?
Thanks,
Randy
|
Hi!
Yes, they are all 7 mm long.
Johan
|
|
Author: | xoshimin | Posted: | Jul 5, 2019 04:39 | Subject: | Re: Inventory Change Request for Set 9680-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, xoshimin writes:
| Please make changes to the following inventory:
|
Could you please post an image of the cover card for this set? I would like to
see if it differs from the cover card for the 1999 version. If so, we should
probably make a new catalog entry for the set instead of adding all of these
alternates.
Thanks,
Randy
|
|
|
|
Author: | xoshimin | Posted: | Jul 5, 2019 04:38 | Subject: | Re: Inventory Change Request for Set 9680-1 | Viewed: | 30 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, xoshimin writes:
| Please make changes to the following inventory:
|
Could you please post an image of the cover card for this set? I would like to
see if it differs from the cover card for the 1999 version. If so, we should
probably make a new catalog entry for the set instead of adding all of these
alternates.
Thanks,
Randy
|
|
|
|
Author: | randyf | Posted: | Jul 5, 2019 04:12 | Subject: | Re: Inventory Change Request for Set 9680-1 | Viewed: | 39 times | Topic: | Inventories Requests | |
| In Inventories Requests, xoshimin writes:
| Please make changes to the following inventory:
|
Could you please post an image of the cover card for this set? I would like to
see if it differs from the cover card for the 1999 version. If so, we should
probably make a new catalog entry for the set instead of adding all of these
alternates.
Thanks,
Randy
|
|
Author: | randyf | Posted: | Jul 5, 2019 00:47 | Subject: | Re: Inventory Change Request for Set 7508-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Oh, that makes sense.
I just noticed that contains both trans-light and trans-medium as
alternates.
|
Are you going to buy that one or should I?
I think we know the answer to the riddle in that set, but proof is always nice.
|
|
Author: | axaday | Posted: | Jul 5, 2019 00:06 | Subject: | Re: Inventory Change Request for Set 7508-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, axaday writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 3 Part {Trans-Medium Blue to Trans-Light Blue} Clikits038a Clikits Icon, Round 2 x 2 Small with Hole, Frosted (Solid and Transparent Colors)
Comments from Submitter:
In the course of this investigation: https://www.bricklink.com/message.asp?ID=1147786 I noticed that my pieces from 7508 were Trans-Light Blue, not Trans-Medium Blue. The colors on these pieces are difficult because of the thickness of the plastic, but I will attach a comparison image that should help it be clearer.
|
Just comparing to Trans-light blue (the star) the piece looks like a different
color. But a thick Clikit in Trans-medium blue looks way different. But if you
look at the thin plastic in the middle of the round one, it is a good match for
the star. It looks better in person than in the pic. If it isn't trans-light
blue, it is a color that isn't in the catalog, but I think it is close enough.
|
According to Ryan Howerter, the color of this part is Trans-Medium Blue. See
the last post on this page:
https://www.flickr.com/photos/126975831@N07/15191136091/
The color that is not on BrickLink yet is the color of the flower in your picture:
https://www.flickr.com/photos/126975831@N07/15186139306/
This request will not be accepted.
Cheers,
Randy
|
Oh, that makes sense.
I just noticed that contains both trans-light and trans-medium as
alternates.
|
|
Author: | randyf | Posted: | Jul 4, 2019 23:56 | Subject: | Re: Inventory Change Request for Set 7508-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 3 Part {Trans-Medium Blue to Trans-Light Blue} Clikits038a Clikits Icon, Round 2 x 2 Small with Hole, Frosted (Solid and Transparent Colors)
Comments from Submitter:
In the course of this investigation: https://www.bricklink.com/message.asp?ID=1147786 I noticed that my pieces from 7508 were Trans-Light Blue, not Trans-Medium Blue. The colors on these pieces are difficult because of the thickness of the plastic, but I will attach a comparison image that should help it be clearer.
|
Just comparing to Trans-light blue (the star) the piece looks like a different
color. But a thick Clikit in Trans-medium blue looks way different. But if you
look at the thin plastic in the middle of the round one, it is a good match for
the star. It looks better in person than in the pic. If it isn't trans-light
blue, it is a color that isn't in the catalog, but I think it is close enough.
|
According to Ryan Howerter, the color of this part is Trans-Medium Blue. See
the last post on this page:
https://www.flickr.com/photos/126975831@N07/15191136091/
The color that is not on BrickLink yet is the color of the flower in your picture:
https://www.flickr.com/photos/126975831@N07/15186139306/
This request will not be accepted.
Cheers,
Randy
|
|
Author: | paulvdb | Posted: | Jul 4, 2019 23:46 | Subject: | Re: Inventory Change Request for Set 1060-1 | Viewed: | 31 times | Topic: | Inventories Requests | |
| In Inventories Requests, zorbanyc writes:
| Please make changes to the following inventory:
* Add 6 Part 3031 Light Gray Plate 4 x 4
|
I see that you have a new set for sale in your store. I assume that set is the
source for this request?
|
|
Author: | axaday | Posted: | Jul 4, 2019 23:45 | Subject: | Re: Inventory Change Request for Set 7508-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 3 Part {Trans-Medium Blue to Trans-Light Blue} Clikits038a Clikits Icon, Round 2 x 2 Small with Hole, Frosted (Solid and Transparent Colors)
Comments from Submitter:
In the course of this investigation: https://www.bricklink.com/message.asp?ID=1147786 I noticed that my pieces from 7508 were Trans-Light Blue, not Trans-Medium Blue. The colors on these pieces are difficult because of the thickness of the plastic, but I will attach a comparison image that should help it be clearer.
|
Just comparing to Trans-light blue (the star) the piece looks like a different
color. But a thick Clikit in Trans-medium blue looks way different. But if you
look at the thin plastic in the middle of the round one, it is a good match for
the star. It looks better in person than in the pic. If it isn't trans-light
blue, it is a color that isn't in the catalog, but I think it is close enough.
|
|
|
Author: | axaday | Posted: | Jul 4, 2019 23:38 | Subject: | Inventory Change Request for Set 7508-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 3 Part {Trans-Medium Blue to Trans-Light Blue} Clikits038a Clikits Icon, Round 2 x 2 Small with Hole, Frosted (Solid and Transparent Colors)
Comments from Submitter:
In the course of this investigation: https://www.bricklink.com/message.asp?ID=1147786 I noticed that my pieces from 7508 were Trans-Light Blue, not Trans-Medium Blue. The colors on these pieces are difficult because of the thickness of the plastic, but I will attach a comparison image that should help it be clearer.
|
|
Author: | axaday | Posted: | Jul 4, 2019 22:56 | Subject: | Inventory Change Request for Set 7505-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part {Medium Orange to Trans-Light Orange} clikits081 Clikits Flexy Film, Flower 10 Petals 4 x 4 with Raised Border
Comments from Submitter:
This is just a cleanup move. I have had this a while and the set isn't sealed anymore, but I trust the handling of the piece. Anyway, the inventory used to be correct as far as consistency with other sets goes, but we've been moving the pieces like this to trans-light orange because it is a better match.
|
|
Author: | axaday | Posted: | Jul 4, 2019 22:45 | Subject: | Re: Inventory Change Request for Set 7531-1 | Viewed: | 11 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Change 4 Part Trans-Dark Pink {clikits013u Clikits Icon, Star 2 x 2 Small with Pin - (Undetermined Version) to clikits013b Clikits Icon, Star 2 x 2 Small with Pin, Polished (Transparent Colors Only)}
Comments from Submitter:
Missed one. Pic on the way.
|
|
|
|
Author: | axaday | Posted: | Jul 4, 2019 22:44 | Subject: | Inventory Change Request for Set 7531-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Trans-Dark Pink {clikits013u Clikits Icon, Star 2 x 2 Small with Pin - (Undetermined Version) to clikits013b Clikits Icon, Star 2 x 2 Small with Pin, Polished (Transparent Colors Only)}
Comments from Submitter:
Missed one. Pic on the way.
|
Author: | zorbanj | Posted: | Jul 4, 2019 22:10 | Subject: | Inventory Change Request for Set 1060-1 | Viewed: | 60 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 6 Part 3031 Light Gray Plate 4 x 4
|
|
Author: | randyf | Posted: | Jul 4, 2019 21:37 | Subject: | Re: Inventory Change Request for Set 7529-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, axaday writes:
| Please make changes to the following inventory:
* Add 4 Part clikits003 Trans-Orange Clikits Bead, Ring Thick Small with Hole (Alternate) (match ID 1)
* Add 4 Part Clikits020b Trans-Orange Clikits Icon, Flower 10 Petals 2 x 2 Large with Pin, Polished (Transparent Colors Only) (Alternate) (match ID 2)
* Add 12 Part Clikits004b Trans-Orange Clikits Icon, Flower 10 Petals 2 x 2 Small with Pin, Polished (Transparent Colors Only) (Alternate) (match ID 2)
* Change 1 Part {Dark Pink to Trans-Dark Pink} clikits081 Clikits Flexy Film, Flower 10 Petals 4 x 4 with Raised Border
* Change 1 Part {Medium Orange to Trans-Light Orange} clikits081 Clikits Flexy Film, Flower 10 Petals 4 x 4 with Raised Border
* Change 8 Part Trans-Dark Pink {clikits020u Clikits Icon, Flower 10 Petals 2 x 2 Large with Pin - Undetermined Version) to clikits020a Clikits Icon, Flower 10 Petals 2 x 2 Large with Pin, Frosted (Solid and Transparent Colors)}
* Change 6 Part Trans-Dark Pink {clikits004u Clikits Icon, Flower 10 Petals 2 x 2 Small with Pin - (Undetermined Version) to clikits004a Clikits Icon, Flower 10 Petals 2 x 2 Small with Pin, Frosted (Solid and Transparent Colors)}
* Change 4 Part Trans-Light Orange clikits003 Clikits Bead, Ring Thick Small with Hole {match ID 0 to 1}
* Change 4 Part Trans-Light Orange clikits020u Clikits Icon, Flower 10 Petals 2 x 2 Large with Pin - Undetermined Version) {match ID 0 to 2}
* Change 12 Part Trans-Light Orange clikits004u Clikits Icon, Flower 10 Petals 2 x 2 Small with Pin - (Undetermined Version) {match ID 0 to 2}
* Change 8 Part Trans-Neon Yellow {clikits020u Clikits Icon, Flower 10 Petals 2 x 2 Large with Pin - Undetermined Version) to clikits020a Clikits Icon, Flower 10 Petals 2 x 2 Large with Pin, Frosted (Solid and Transparent Colors)}
Comments from Submitter:
I wish this was less messy, but since a bunch of parts were specifically changed to trans light orange, I'll leave those in there, even though it means leaving undetermined pieces.
|
The parts were changed to Trans-Light Orange when the new color was added to
the catalog. I do not think member WoutR had a sealed set to use for those changes,
but was basing it off of assumptions from images. Since you have a sealed set,
the changes you are making will take precedence over the other changes. I will
make the adjustments manually after going through your requests.
Cheers,
Randy
|
|
Author: | randyf | Posted: | Jul 4, 2019 21:06 | Subject: | Re: Inventory Change Request for Set 160-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, palenjo writes:
| Please make changes to the following inventory:
* Add 3 Part 737ac02 Red Plate, Modified 2 x 4 with Train Coupler Open for Magnet with Blue Magnet Coupling, Train - 7mm Cylinder (737a / x547b) (Alternate)
* Add 3 Part 737ac01 Red Plate, Modified 2 x 4 with Train Coupler Open for Magnet with Same Color Magnet Coupling, Train - 7mm Cylinder (737a / x547b) (Alternate)
Comments from Submitter:
In my unopened set the cylinders are short. Don't know if I should suggest it as alternate part or regular part. I have photos, but can't see on this page how to add them. Johan
|
Hi there, Johan!
Did you measure the length of all of the red and blue cylinders to make sure
they were all 7mm long?
Thanks,
Randy
|
|
Author: | bb1429717 | Posted: | Jul 4, 2019 19:19 | Subject: | 700e H Baseplate? | Viewed: | 104 times | Topic: | Catalog | Status: | Open | |
| In the catalog I see there are a few varients of the 700e early baseplate, but
I recently ran across a couple with numbers that werent in the catolog. They
are most similar to the 700eD plates, but to have different featured like the
shape of the cross supports where they cross, and are marked '700 e H'
on the bottom.
Should The 700e H varient be added and/or does anyone know anything about this
baseplate? (sorry I'm very new here or I would attempt to add it myself)
|
|
|
Author: | randyf | Posted: | Jul 4, 2019 19:14 | Subject: | Re: inventory question | Viewed: | 22 times | Topic: | Inventories | |
| In General, mattallica writes:
| recently i have been buying some Duplo figures for my son and have noted that
figures like Batman that have a cape are inventoried without them meaning to
get a complete figure you must buy the cape separately.
why is this? minifigs come with their capes?
|
Duplo figures have historically not been inventoried with their capes, and I
honestly don't know why. It is something that should probably be added to
the Catalog Roadmap for consideration of being changed.
Cheers,
Randy
|
Author: | mr.misior | Posted: | Jul 4, 2019 18:37 | Subject: | Re: holographic tile ID please | Viewed: | 25 times | Topic: | Catalog | |
| In Catalog, cycbuild writes:
| In Catalog, mr.misior writes:
| could someone please tell me which set this belongs to.
the face is holographic and only visible at certain angle.
|
|
thank you!
|
Author: | mattallica | Posted: | Jul 4, 2019 18:22 | Subject: | inventory question | Viewed: | 72 times | Topic: | Inventories | Status: | Open | |
| recently i have been buying some Duplo figures for my son and have noted that
figures like Batman that have a cape are inventoried without them meaning to
get a complete figure you must buy the cape separately.
why is this? minifigs come with their capes?
|
Author: | cycbuild | Posted: | Jul 4, 2019 18:17 | Subject: | Re: holographic tile ID please | Viewed: | 23 times | Topic: | Catalog | |
| In Catalog, mr.misior writes:
| could someone please tell me which set this belongs to.
the face is holographic and only visible at certain angle.
|
|
Author: | mr.misior | Posted: | Jul 4, 2019 18:14 | Subject: | holographic tile ID please | Viewed: | 54 times | Topic: | Catalog | Status: | Open | |
| could someone please tell me which set this belongs to.
the face is holographic and only visible at certain angle.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|