| Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Admin_Russell | Posted: | Jan 14, 2019 12:51 | Subject: | Re: Complete set of Unikitty CMFs? | Viewed: | 77 times | Topic: | Catalog | |
| In Catalog, alphadavy writes:
| In Catalog, yorbrick writes:
| | | How would you recommend selling a complete set of CMFs?
|
Personally, I would do what these other sellers have done and list the whole
set under the random entry. As long as you describe things clearly in your notes,
buyers will understand that they are paying for a whole set. This is one of those
areas where the average prices must be deduced from scanning listings or sold
listings instead of the calculated averages.
|
It is a shame that the site cannot do something and step in and help sellers
and buyers here, by realising what they need. Some people want to sell and buy
complete series. I thought the primary goal of bricklink was to enable sales
of LEGO, so adding a "complete series" for each CMF or similar series would work
well for those people. Does it really matter that they were never sold that way
by LEGO? If need be, this information could always be added as a note to a complete
series entry.
|
+1
It's about time!
|
Here you go. Let's try it out.
Let me know if you think the random one needs a big question mark placed over
it. If people like this entry and use it, we'll go ahead and add the others.
|
|
Author: | joker33 | Posted: | Jan 14, 2019 12:47 | Subject: | Re: Inventory Change Request for Set 8421-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, joker33 writes:
| Please make changes to the following inventory:
* Add 1 Part x77ac500 Black String, Cord Thin 500cm (Alternate) (match ID 1)
|
Hi! I bought an 8421 recently, and in bag number 8 there was the cord "4276327"
(=x77ac500) (see pictures). That's different from the database here, which
states x77cc250.
|
|
Author: | joker33 | Posted: | Jan 14, 2019 12:34 | Subject: | Inventory Change Request for Set 8421-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part x77ac500 Black String, Cord Thin 500cm (Alternate) (match ID 1)
|
|
Author: | peegeelee | Posted: | Jan 14, 2019 12:27 | Subject: | Re: Tool to determine sets based on inventory | Viewed: | 29 times | Topic: | Inventories | |
| In Inventories, brikomania writes:
| In Inventories, peegeelee writes:
| Fellow Bricklinkers,
I am looking for the easiest way to determine if a set can be built based on
a defined inventory, or, even better, a tool which can automatically determine
what sets can be built from a defined inventory.
Do you guys know of any such toot(s)/ways to do so or I am asking for the moon?
Thanks in advance!
Cheers
Pierre
|
I believe rebrickable is just for that!
| Exactly what I needed, thanks for pointing me in the right direction brikomania!
|
|
Author: | peegeelee | Posted: | Jan 14, 2019 12:21 | Subject: | Re: Tool to determine sets based on inventory | Viewed: | 27 times | Topic: | Inventories | |
| In Inventories, brikomania writes:
| In Inventories, peegeelee writes:
| Fellow Bricklinkers,
I am looking for the easiest way to determine if a set can be built based on
a defined inventory, or, even better, a tool which can automatically determine
what sets can be built from a defined inventory.
Do you guys know of any such toot(s)/ways to do so or I am asking for the moon?
Thanks in advance!
Cheers
Pierre
|
I believe rebrickable is just for that!
|
Thanks, let me look into that!
|
|
Author: | brikomania | Posted: | Jan 14, 2019 12:14 | Subject: | Re: Tool to determine sets based on inventory | Viewed: | 29 times | Topic: | Inventories | |
| In Inventories, peegeelee writes:
| Fellow Bricklinkers,
I am looking for the easiest way to determine if a set can be built based on
a defined inventory, or, even better, a tool which can automatically determine
what sets can be built from a defined inventory.
Do you guys know of any such toot(s)/ways to do so or I am asking for the moon?
Thanks in advance!
Cheers
Pierre
|
I believe rebrickable is just for that!
|
|
Author: | Shahennian | Posted: | Jan 14, 2019 12:07 | Subject: | Black Lightning | Viewed: | 129 times | Topic: | Inventories | Status: | Open | |
| Hello,
I recently purchased the "SDCC2018-2: Black Lightning" set. I then went on Brickset
to add it to my collection, but no minifig is listed for the set. I proceeded
to send them a message so they could fix this error, but they told me they rely
on Bricklink for their minifig inventory.
That's why I'm posting a message here. I noticed that there are two entries
for Black Lightning on Bricklink : comcon056-1 for the full set and sh521 for
the minifig. But these two entries are not linked one to another.
Could someone in the admin team link them?
Thanks a lot!
|
|
Author: | peegeelee | Posted: | Jan 14, 2019 11:57 | Subject: | Tool to determine sets based on inventory | Viewed: | 64 times | Topic: | Inventories | Status: | Open | |
| Fellow Bricklinkers,
I am looking for the easiest way to determine if a set can be built based on
a defined inventory, or, even better, a tool which can automatically determine
what sets can be built from a defined inventory.
Do you guys know of any such toot(s)/ways to do so or I am asking for the moon?
Thanks in advance!
Cheers
Pierre
|
|
Author: | axaday | Posted: | Jan 14, 2019 09:17 | Subject: | Re: Correct handling of 18904c01pb01 | Viewed: | 39 times | Topic: | Catalog | |
| In Catalog, normann1974 writes:
| In Catalog, axaday writes:
| In Catalog, normann1974 writes:
| In Catalog, axaday writes:
| In Catalog, normann1974 writes:
| Please take a look at:
https://www.bricklink.com/catalogItemIn.asp?P=18904c01pb01&in=S
The crocodile consists of 4 parts and doesn't come assembled (at least not
in set 60157 which I just parted out). So isn't the correct way to include
the four parts in the inventories and the complete assembly as a counterpart
for all sets in the above list?
/Jan
|
You are correct. The pieces that come in the set should be included in the inventory
with the complete animal in the counterparts.
|
I'd love to fix this, but your response contradicts what two other admins
say in this thread. I'll let you all agree before I do anything.
/Jan
|
My response doesn't matter if the admins contradict it. But you will see
that Russell didn't exactly contradict me. He said they belong there, but
they just can't go there for the moment.
|
But just because the part-out system doesn't work like some people want to,
I don't see that as a reason not to make the inventories consistent. That
work can already be done now, and I have even offered to do it.
/Jan
|
For what it's worth, I agree with you and was totally unaware of the part
out thing being an issue. But I'm not the one you need to convince.
|
|
Author: | Jetflap | Posted: | Jan 14, 2019 08:25 | Subject: | Re: Inventory Change Request for Set 6440-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| This is also correct, 2 taps for to extinguishers, thank you. I have added additional
photos showing both, where they are built in the instructions and where they
are placed in the model.
In Inventories Requests, elias3 writes:
| In Inventories Requests, Jetflap writes:
| In Inventories Requests, Jetflap writes:
| Please make changes to the following inventory:
* Change {3 to 4} Part Yellow 3062b Brick, Round 1 x 1 Open Stud
Comments from Submitter:
4 are clearly required for the set, 2 are used in the fire extinguishers and 2 for the water cannons. See photo from back of box the shows 2 fire extinguishers and two alternate builds that require 4 of this part.
|
|
Hi
and add also 1x yellow tap
Peeron has also 4x 3062b and 2x 4599a
http://www.peeron.com/inv/sets/6440-1
my count: the MF (driver) use the tap/round brick inside and airtanks inside
the other minfig use the other tap/round brick with the axe (other axe still
on the truck)
Stefaan
|
|
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
|