BrickLink Discussion Forum

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

6941-1 (Inv) Battrax
272 Parts, 1 Minifigure, 1987
Sets: Space: Blacktron I

* Delete 12 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue

Photos are taken from a sealed Canadian copy on Ebay.
The Canadian Samsonite had its own way of packaging. Strange there used only
one plastic bag and most parts were just loose inside the box.

Here is another from here
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=4729204
but with bags (all sealed)

But my question is when you deleting 12 of them why you addng only 2 on sprue
not 6?

Author:

SezaR

Posted:

Dec 6, 2018 02:12

Subject:

Re: Inventory Change Request for Set 6941-1

Viewed:

32 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

6941-1 (Inv) Battrax
272 Parts, 1 Minifigure, 1987
Sets: Space: Blacktron I

* Delete 12 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue

Photos are taken from a sealed Canadian copy on Ebay.
The Canadian Samsonite had its own way of packaging. Strange there used only
one plastic bag and most parts were just loose inside the box.

Author:

SezaR

Posted:

Dec 6, 2018 02:09

Subject:

Inventory Change Request for Set 6941-1

Viewed:

26 times

Topic:

Status:

Open

Please make changes to the following inventory:

6941-1 (Inv) Battrax
272 Parts, 1 Minifigure, 1987
Sets: Space: Blacktron I

* Delete 12 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue

Author:

Hygrotus

Posted:

Dec 6, 2018 01:38

Subject:

Re: Inventory Change Request for Set 10030-1

Viewed:

28 times

Topic:

In Inventories Requests, canim writes:

Please make changes to the following inventory:

10030-1 (Inv) Imperial Star Destroyer - UCS
3106 Parts, 2002
Sets: Star Wars: Ultimate Collector Series: Star Wars Episode 4/5/6

* Change {31 to 30} Part Black 4592c03 Lever Small Base with Light Gray Lever
* Change {17 to 16} Part Light Gray 4592c03 Lever Small Base with Light Gray Lever

Comments from Submitter:
The manual shows only 30 and 16 items used, that +1 is already as extra included.

and you are right. Thank you for finding this mistakes in the inventory. These
errors are there since 2005 (sic!)

(Just wonder there are so many SW UCS collectors and nobody notice it earlier

)

Black 4592c03 occur in instruction:
p.40 -1x
p.46 -1x
p.48 -1x
p.54 -1x
p.123 -1x
p.146 -1x
p.156 -2x
p.158 -2x
p.166 -4x
p.175 -2x
p.180 -2x
p.183 -4x
p.184 -8x
So 30 there are

Light gray 4592c03 occur in instruction only on page 200 (8x) and 201 (8x), so
16 there are.

I think I know why we have these numbers in this inventory. When you carefully
study inv change log for this set https://www.bricklink.com/catalogInvChangeItem.asp?itemType=S&itemNo=10030-1&viewDate=Y&viewStatus=1
it can be notice that extras of these two parts were added on Sep 9, 2005 (also
in the same change request were changed quantities of 3 other extras, I will
return to them). But after that no other changes for those levers so it seems
that initally this set was inventoried with extras of them in regular section
but after addition them to extras quantities of those levers were never reduced.
Why I think so it is the case. Look what happened with magnets in the same time.
Changed to 32 then were added two extras and quantity reduced to 30 and again
extras changed to four and quantity in regular reduced to 28. So here when quantity
of magnets in extra section was changing also quantity in regular was adjusted.
But it was never done for levers and instruction confirms that.

Now let's look at other two changed extras quantities in the same date:
black

2780 Technic, Pin with Short Friction Ridges
Parts: Technic, Pin

extras changed from 1 to 2
and blue

4274 Technic, Pin 1/2 without Friction Ridges
Parts: Technic, Pin

extras changed from 1 to 2
Here also quantities of them weren't adjusted after change of extras quantities.
So could there also be a mistake? the same as in levers?
Why there could be? Let's check parts count for this set. On box there are
clearly 3104 parts stated, it is best visible in this review https://www.youtube.com/watch?v=8-5Hc-T9xXg
(I attached also screeshot). We have now 3108 parts in this inventory. After
this change when we reduced quantities of those of levers we will have 3106 parts
so we are still 2 too many. So there could be still similar mistake in these
pins I think

Also it is interesting that this set don't have this one
extra (very common extra part as an extra):

3673 Technic, Pin without Friction Ridges
Parts: Technic, Pin

(but as I check not all sets from 2002 have it as an extra).

So anybody volunteer to check whole instruction of this set to count this

2780 Technic, Pin with Short Friction Ridges
Parts: Technic, Pin

(154 to count)
and this part

4274 Technic, Pin 1/2 without Friction Ridges
Parts: Technic, Pin

(219 to count)
and maybe also this one

3673 Technic, Pin without Friction Ridges
Parts: Technic, Pin

just to be sure

(I will try to do it but in no predictably future, when I find finally some free
time when nothing to do

)

Last thing inventory of this set was confirmed from sealed set content btw but
there are still mistakes at it occured

Author:

SezaR

Posted:

Dec 6, 2018 01:30

Subject:

Re: Inventory Change Request for Set 2150-1

Viewed:

9 times

Topic:

http://www.brickshelf.com/cgi-bin/gallery.cgi?i=5904900

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

2150-1 (Inv) Train Station
554 Parts, 8 Minifigures, 1996
Sets: Train: 9V

* Delete 12 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 12 Part 4624 White Wheel 8mm D. x 6mm
* Change 12 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}

Author:

SezaR

Posted:

Dec 6, 2018 01:28

Subject:

Inventory Change Request for Set 2150-1

Viewed:

16 times

Topic:

Status:

Open

Please make changes to the following inventory:

2150-1 (Inv) Train Station
554 Parts, 8 Minifigures, 1996
Sets: Train: 9V

Author:

SezaR

Posted:

Dec 6, 2018 01:23

Subject:

Re: Inventory Change Request for Set 6450-1

Viewed:

13 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

6450-1 (Inv) Mobile Police Truck
76 Parts, 1 Minifigure, 1986
Sets: Town: Classic Town: Police

* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Delete 4 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium
* Change 4 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}

Also
http://www.brickshelf.com/cgi-bin/gallery.cgi?i=4124935

Author:

SezaR

Posted:

Dec 6, 2018 01:22

Subject:

Inventory Change Request for Set 6450-1

Viewed:

16 times

Topic:

Status:

Open

Please make changes to the following inventory:

6450-1 (Inv) Mobile Police Truck
76 Parts, 1 Minifigure, 1986
Sets: Town: Classic Town: Police

Author:

SezaR

Posted:

Dec 6, 2018 01:17

Subject:

Re: Inventory Change Request for Set 6480-1

Viewed:

8 times

Topic:

http://www.brickshelf.com/cgi-bin/gallery.cgi?i=4124937

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

6480-1 (Inv) Hook and Ladder Truck
106 Parts, 1 Minifigure, 1986
Sets: Town: Classic Town: Fire

* Delete 2 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 6 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium
* Delete 8 Part 4624 White Wheel 8mm D. x 6mm
* Change 2 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
* Change 6 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}

Author:

SezaR

Posted:

Dec 6, 2018 01:15

Subject:

Inventory Change Request for Set 6480-1

Viewed:

14 times

Topic:

Status:

Open

Please make changes to the following inventory:

6480-1 (Inv) Hook and Ladder Truck
106 Parts, 1 Minifigure, 1986
Sets: Town: Classic Town: Fire

Author:

randyf

Posted:

Dec 5, 2018 22:32

Subject:

Re: Inventory Change Request for Set 6396-1

Viewed:

20 times

Topic:

In Inventories Requests, FreeStorm writes:

Please make changes to the following inventory:

6396-1 (Inv) International Jetport
463 Parts, 8 Minifigures, 1990
Sets: Town: Classic Town: Airport

* Delete 6 Part 3139 Black Tire 14mm D. x 4mm Smooth Small Single
* Delete 6 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Delete 6 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 6 Part 4624 White Wheel 8mm D. x 6mm
* Delete 14 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Add 7 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
* Delete 8 Part 4073 Trans-Dark Blue Plate, Round 1 x 1 Straight Side
* Add 4 Part 4073c01 Trans-Dark Blue Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4073 Trans-Green Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Green Plate, Round 1 x 1, 2 on Sprue
* Delete 15 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 8 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Delete 6 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Delete 32 Part 4073 White Plate, Round 1 x 1 Straight Side
* Add 16 Part 4073c01 White Plate, Round 1 x 1, 2 on Sprue
* Change 6 Part Light Gray 4624c01 Wheel 8mm D. x 6mm with Black Tire 14mm D. x 4mm Smooth Small Single (4624 / 3139) {Counterpart to Regular}
* Change 6 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}

Comments from Submitter:
Source:

Additional image that shows one set of the wheels much better:

Author:

FreeStorm

Posted:

Dec 5, 2018 20:06

Subject:

Re: Inventory Change Request for Set 6396-1

Viewed:

17 times

Topic:

Image posted for future reference in case links become unusable.

Author:

FreeStorm

Posted:

Dec 5, 2018 19:58

Subject:

Inventory Change Request for Set 6396-1

Viewed:

18 times

Topic:

Status:

Open

Please make changes to the following inventory:

6396-1 (Inv) International Jetport
463 Parts, 8 Minifigures, 1990
Sets: Town: Classic Town: Airport

Author:

normann1974

Posted:

Dec 5, 2018 19:41

Subject:

Re: Brown vs reddish brown cape

Viewed:

33 times

Topic:

The capes are most likely made from many different reams of material that would
most likely have color variation within them. Also, all of these capes come from
sets that were far after the famous color change of 2004, so I don't see
any of them being old brown capes. I think it is merely another example of poor
color quality control. Even black capes vary in color density.

Ok, I'll take your word for it and consider them all RB to sell in the 7665
set.

BTW - I meant to write "the leftmost is the darkest" in my previous message.

/Jan

Author:

canim

Posted:

Dec 5, 2018 19:22

Subject:

Inventory Change Request for Set 10030-1

Viewed:

32 times

Topic:

Status:

Open

Please make changes to the following inventory:

10030-1 (Inv) Imperial Star Destroyer - UCS
3106 Parts, 2002
Sets: Star Wars: Ultimate Collector Series: Star Wars Episode 4/5/6

Author:

randyf

Posted:

Dec 5, 2018 19:16

Subject:

Re: Inventory Change Request for Set 8261-1

Viewed:

27 times

Topic:

In Inventories Requests, normann1974 writes:

Picture

Your shock absorber has the soft spring

731c06 Technic, Shock Absorber 6.5L with Black Piston Rod - Soft Spring, Standard Coils
Parts: Technic, Shock Absorber

Would you like to delete your current request and resubmit?

I would prefer you doing that so that you get credit for the change.

If not, I will reject the request and add in the correct version manually.

Cheers,
Randy

Author:

randyf

Posted:

Dec 5, 2018 18:58

Subject:

Re: Inventory Change Request for Set 6672-1

Viewed:

17 times

Topic:

In Inventories Requests, FreeStorm writes:

Please make changes to the following inventory:

6672-1 (Inv) Safari Off-Road Vehicle (Safari Off Road Vehicle/Safari Truck)
53 Parts, 2 Minifigures, 1990
Sets: Town: Classic Town: Off-Road

* Delete 4 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium
* Delete 2 Part 4073 Light Gray Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Light Gray Plate, Round 1 x 1, 2 on Sprue
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Delete 1 Part 4073 Light Gray Plate, Round 1 x 1 Straight Side (Extra)
* Delete 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side (Extra)
* Change 4 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}

Comments from Submitter:
Source:

http://www.brickshelf.com/cgi-bin/gallery.cgi?f=268726

and

https://www.brickpirate.net/forum/phpBB3/viewtopic.php?f=18&t=21575&p=511867&hilit=review

PS: as you can see on both link, the minifigs come partially assembled.
A can't see minifig head studs on picture.

Image posted for future reference in case links become unusable.

Author:

randyf

Posted:

Dec 5, 2018 18:36

Subject:

Re: Brown vs reddish brown cape

Viewed:

29 times

Topic:

In Colors, normann1974 writes:

In Colors, SylvainLS writes:

In Colors, normann1974 writes:

[…]
So what do you say? Are they still considered to be the same color although they
seem not to be?

Er, now they look aubergine (egg plant / dark purple), not (reddish) brown.

Yeah, that picture wasn't any good. I think my camera get confused by the
wood color of my table.

Here's another pic of the two capes from the 7665 set (left, middle) set
and one from 7965 (right, guaranteed reddish brown). Well, the capes are actually
three shades of brown, the rightmost is the darkest. Now I'm totally confused.

/Jan

Author:

normann1974

Posted:

Dec 5, 2018 18:31

Subject:

Re: Inventory Change Request for Set 8261-1

Viewed:

17 times

Topic:

Picture

Author:

normann1974

Posted:

Dec 5, 2018 18:31

Subject:

Inventory Change Request for Set 8261-1

Viewed:

32 times

Topic:

Status:

Open

Please make changes to the following inventory:

8261-1 (Inv) Rally Truck
198 Parts, 2009
Sets: Technic: Model: Off-Road

* Change 2 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301a Hinge Plate 1 x 2 Locking with 1 Finger On End with Bottom Groove}
* Change 1 Part Light Bluish Gray {731c01 Technic, Shock Absorber 6.5L, Complete Assembly - Undetermined Spring Type to 731c05 Technic, Shock Absorber 6.5L, Complete Assembly - Normal Spring}

Comments from Submitter:
Source: MISB-based set that was never mixed with other bricks. Apparently also yellowed.

Anyway, I have a hard time identifying the spring type, so feel free to change it if my entry is wrong. Picture will follow.

Author:

StormChaser

Posted:

Dec 5, 2018 18:12

Subject:

Re: Inventory Change Request for Set 9252-2

Viewed:

20 times

Topic:

In Inventories Requests, 69transamman writes:

I just have to say that no matter what the subject is, I always read thru your
post completely in search of the humor you often interject!

Aww, thanks! That made my day.

drug or alcohol induced

Nope. You may not believe this, but I have never even tasted alcohol and have
never experimented with drugs. I don't use caffeine. I smoke cigarettes
and that's it.

I don't think there's a thing wrong with drug or alcohol use, but I have
always preferred to be in control of my own mind. I do, however, think that life
is something of an absurdity and a joke and I intend to laugh at it whilst I
am able in whatever ways I find.

Author:

normann1974

Posted:

Dec 5, 2018 18:01

Subject:

Re: Brown vs reddish brown cape

Viewed:

28 times

Topic:

In Colors, SylvainLS writes:

In Colors, normann1974 writes:

[…]
So what do you say? Are they still considered to be the same color although they
seem not to be?

Er, now they look aubergine (egg plant / dark purple), not (reddish) brown.

Author:

StormChaser

Posted:

Dec 5, 2018 17:53

Subject:

Re: Inventory Change Request for Set 9252-1

Viewed:

15 times

Topic:

In Inventories Requests, StormChaser writes:

Am creating a new catalog entry for the early version of the set

Note that the later version of the set included 13 sealed bags instead of the
12 bags from the first version. An attached photo from an auction site shows
the contents of the later set, although the green large bricks are not visible
in the photo.

Also, the date printed on the activity/instructions cards is 1994, but the date
printed on the cover/inventory card is 1993. The actual date of re-release is
unknown. I went with 1994, but it could have been earlier.

Author:

FreeStorm

Posted:

Dec 5, 2018 17:50

Subject:

Inventory Change Request for Set 6672-1

Viewed:

21 times

Topic:

Status:

Open

Please make changes to the following inventory:

6672-1 (Inv) Safari Off-Road Vehicle (Safari Off Road Vehicle/Safari Truck)
53 Parts, 2 Minifigures, 1990
Sets: Town: Classic Town: Off-Road

Author:

69transamman

Posted:

Dec 5, 2018 17:49

Subject:

Re: Inventory Change Request for Set 9252-2

Viewed:

17 times

Topic:

I just have to say that no matter what the subject is, I always read thru your
post completely in search of the humor you often interject! Doesn't matter
to me if it's natural, drug or alcohol induced, sleep deprivation, or simply
that the rest of bricklink has driven you mad---I appreciate a good chuckle/chortle/guffaw!
Thanks for all you do!
Howard

In Inventories Requests, StormChaser writes:

In Inventories Requests, StormChaser writes:

Another message follows.

I wanted to include some additional information about this set for future reference
and an inventory change is the best way to do that.

First, I personally and carefully checked every single brick in this set from
sealed contents for which I opened every bag and handled the parts (photos of
my set attached). Mine was the early version of the set released in 1991 and
there were 12 bags in the set. All of the bricks included cross supports except
a single 2 x 3 brick in yellow (the other 11 of the same brick had cross supports).
This is a late appearance for this brick (two years late according to BrickLink's
current timeline) and I was surprised to find it, but there it was.

As for inside supports, those little ridges inside the brick which are only currently
distinguished for one brick (the Brick 2 x 2 without Inside Supports in case
the title or part number changes in the future):

3003old Brick 2 x 2 without Inside Supports
Parts: Brick

All bricks in the set, including those with designs, had these ridges with the
exceptions listed below. I mention this because it will be useful data if we
decide to distinguish these parts in the future (I compared the parts listed
below (except the last two, for which I had no comparison parts) to recent examples
and all of the newer bricks I checked had inside supports).

The aforementioned 2 x 3 brick in yellow without cross supports.
All 2 x 6 bricks in the set.
All 2 x 8 bricks in the set.
All 2 x 10 bricks in the set.
All 4 x 12 bricks in the set.
All 8 x 16 bricks in the set.

The empty window frames had hollow studs as I indicated in the inventory. The
bricks with eyes had no white included as indicated in the inventory.

Finally, and I really don't think we'd ever distinguish this difference,
exactly half of the doors and windows were attached to the left and half to the
right. So two doors attached facing left and four windows attached facing left
and the same number of each facing right. TLG did not distinguish this difference
and I see no need for us to. The door and window directions are easily reversible.

The complete contents of the set are the storage case with no lid, 12 bags of
parts and four green large bricks loose, the cover/inventory cardboard with nothing
printed on the other side, four double-sided activity/instructions cards, and
the informational sheet of paper. All of these are included in an outer original
box with the set number printed thereupon. I have the activity cards from the
1994 version and verified that each of these was different than the 1991 version
in spite of having the same 6-digit identification number printed on each card
for both versions.

I'm certain this last bit has no relevance whatsoever to the discussion,
but I mention it for the sake of completeness: my second cousin's first name
is Frank.

Author:

StormChaser

Posted:

Dec 5, 2018 17:34

Subject:

Re: Inventory Change Request for Set 9252-2

Viewed:

23 times

Topic:

In Inventories Requests, StormChaser writes:

Another message follows.

3003old Brick 2 x 2 without Inside Supports
Parts: Brick

Author:

SylvainLS

Posted:

Dec 5, 2018 17:27

Subject:

Re: Brown vs reddish brown cape

Viewed:

20 times

Topic:

In Colors, normann1974 writes:

[…]
So what do you say? Are they still considered to be the same color although they
seem not to be?

Er, now they look aubergine (egg plant / dark purple), not (reddish) brown.

Author:

Brixalotl

Posted:

Dec 5, 2018 17:24

Subject:

Inventory Change Request for Set 76012-1

Viewed:

16 times

Topic:

Status:

Open

Please make changes to the following inventory:

76012-1 (Inv) Batman: The Riddler Chase
291 Parts, 3 Minifigures, 1 Book, 2014
Sets: Super Heroes: Batman II

* Delete 1 Part 44301 Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type)
* Add 1 Part 44301b Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove

Comments from Submitter:
confirmed during part-out, thanks

Author:

normann1974

Posted:

Dec 5, 2018 17:07

Subject:

Re: Brown vs reddish brown cape

Viewed:

24 times

Topic:

As previously written, my camera is not able to capture the nuance of the color
in the way I see it.

Anyway, I just realized that I have set

7965-1 (Inv) Millennium Falcon
1229 Parts, 6 Minifigures, 2011
Sets: Star Wars: Star Wars Episode 4/5/6

which contains a reddish brown
cape. I just compared. There's a definite difference in color. The one from
7965 definitely has a reddish tint, which I still think the other one is missing.
I took a new picture, but the difference is still not as clear as I see it with
my eyes.

So what do you say? Are they still considered to be the same color although they
seem not to be?

/Jan

Author:

StormChaser

Posted:

Dec 5, 2018 17:01

Subject:

Inventory Change Request for Set 9252-2

Viewed:

18 times

Topic:

Status:

Open

Please make changes to the following inventory:

9252-2 (Inv) Large LEGO Basic Set (1991 Version)
608 Parts, 8 Minifigures, 6 Books, 1 Gear, 1991
Sets: Educational & Dacta: Universal Building Set

* Add 12 Part 3002old Yellow Brick 2 x 3 without Cross Supports (Alternate) (match ID 1)
* Change 12 Part Yellow 3002 Brick 2 x 3 {match ID 0 to 1}

Comments from Submitter:
Another message follows.

Author:

Turribrick

Posted:

Dec 5, 2018 15:44

Subject:

Inventory Change Request for Set 31045-1

Viewed:

16 times

Topic:

Status:

Open

Please make changes to the following inventory:

31045-1 (Inv) Ocean Explorer
213 Parts, 2016
Sets: Creator: Model: Harbor

* Change 1 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}

Comments from Submitter:
Verified from sealed set contents.

Author:

Hygrotus

Posted:

Dec 5, 2018 15:32

Subject:

Re: 42082 extra items

Viewed:

26 times

Topic:

In Inventories, xxxzanka writes:

It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo

Thank you for finding this. Inventory of this set has been corrected.
https://www.bricklink.com/message.asp?ID=1118448

Author:

Hygrotus

Posted:

Dec 5, 2018 15:30

Subject:

Inventory Change Request for Set 42082-1

Viewed:

21 times

Topic:

Status:

Open

Please make changes to the following inventory:

42082-1 (Inv) Rough Terrain Crane
4056 Parts, 2018
Sets: Technic: Model: Construction

* Add 1 Part 3070b Trans-Clear Tile 1 x 1 with Groove (Extra)

Comments from Submitter:
This extra part was found in this set by member xxxzanka https://www.bricklink.com/message.asp?ID=1118297
This review from sealed set content confirms this extra part
https://youtu.be/FTrlyFYOoes?t=21m13s

Author:

Hygrotus

Posted:

Dec 5, 2018 15:21

Subject:

Re: Inventory Change Request for Set 107-1

Viewed:

21 times

Topic:

In Inventories Requests, SezaR writes:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, SezaR writes:

Marek, is it possible to leave this request open? I am busy now, but I can work
more on it.

You have only this one now pending in this bunch of requests
adding of this part as alternate

x466c96blue (Inv) Electric, Wire 12V / 4.5V with 2 Leads, 96 Studs Long with 2 Blue Electric, Connector, 2-Way Male Rounded Narrow Type 2 with Hollow Pins (x466c96 / bb0236ac01)
Parts: Electric, Wire & Connector

All other are now approved or rejected.

You didn't show any proof for it yet.

I was confused between the blue connector
[p=bb141c01]
and
[p=bb236bc01]
The wire with connector

comes with the connector
[p=bb236bc01]
These things should be fixed (better photos to be added, wires need to have an
inventory so that we can easily see what connector comes with what wire)
I did not know that the blue connector
[p=bb141c01]
exists (thought it exists only in light gray). Currently, it appears only with
the set 901-1 (only released in US) but it is listed ONLY by European sellers.
With what set did these European sellers find it? (I don't know, but my guess
is 107-1)
The box art of 107-1 shows the blue connector
[p=bb141c01]
but the box art and instructions of sets 182-1 and 183-1 shows the connectors
[p=bb236bc01]
The white wire with blue connector bb141c01 is not yet added to the catalog of
BL. If the inventory admins decide to keep bb141c01 with 107-1, somebody should
first add it but I don't have any copy of this blue connector.

Sorry for the long wait for conclude this request
Exactly part assembly plugs with wire which you want to add to the set to replace
separate entries of plugs an wire are not the same, plugs variant is diffrent
in assembly than variant of blue plugs which was in this inventory.

I will return the original blue plug and white wire which were there before this
request to regular section of this inventory and move 996bc96gray to alternate.

So as this part which left in this request is wrong for this set (wrong variant
of plugs) this will be rejected.

We can return to this inventory when correct plug and wire assembly will be added
to the catalog with photo.

Author:

Turribrick

Posted:

Dec 5, 2018 15:15

Subject:

Inventory Change Request for Set 60158-1

Viewed:

20 times

Topic:

Status:

Open

Please make changes to the following inventory:

60158-1 (Inv) Jungle Cargo Helicopter
192 Parts, 2 Minifigures, 2017
Sets: Town: City: Jungle

* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}

Comments from Submitter:
Verified from sealed set contents.

Author:

Turribrick

Posted:

Dec 5, 2018 14:59

Subject:

Inventory Change Request for Set 60192-1

Viewed:

27 times

Topic:

Status:

Open

Please make changes to the following inventory:

60192-1 (Inv) Arctic Ice Crawler
196 Parts, 1 Minifigure, 2018
Sets: Town: City: Arctic

* Change 8 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
* Change 8 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}

Comments from Submitter:
Verified from sealed set contents.

Author:

jagaboo

Posted:

Dec 5, 2018 14:21

Subject:

Re: Part #30027u - Wheel 8mm D. x 9mm (for Slicks

Viewed:

20 times

Topic:

Never mind!!! I figured it out...SORRY!!

In Catalog, jagaboo writes:

Notice the image of Part 30027u, showing 3 views of the part. The bottom view
of it doesn’t have any notches. All my 30027u’s look like this...no notches.
Looking at the photo of all the other similar parts, all versions are notched.
Shouldn't 30027u remain or be given a different part number?

Author:

jagaboo

Posted:

Dec 5, 2018 14:17

Subject:

Part #30027u - Wheel 8mm D. x 9mm (for Slicks

Viewed:

34 times

Topic:

Status:

Open

Author:

StormChaser

Posted:

Dec 5, 2018 14:01

Subject:

Inventory Change Request for Set 9252-1

Viewed:

27 times

Topic:

Status:

Open

Please make changes to the following inventory:

9252-1 (Inv) Large LEGO Basic Set (1994 Version)
626 Parts, 6 Books, 1 Gear, 1994
Sets: Educational & Dacta: Universal Building Set

* Delete 4 Minifig 4224c01 Basic Figure Finger Puppet Female (bfp001) (match ID 1)
* Delete 4 Minifig 4224c02 Basic Figure Finger Puppet Male (bfp002) (match ID 1)
* Change 1 Part Black 4744px15 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Moustache Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Black 4744px9 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Simple Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 2 Part Black 4744px14 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Woman Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Red 4744px3 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Freckles and Ears Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Red 4744px15 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Moustache Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 2 Part White 4744px16 Brick, Modified 2 x 4 x 2 Double Curved Top with Baby Face Pacifier Pattern {Alternate to Regular} {match ID 1 to 0}

Comments from Submitter:
Am creating a new catalog entry for the early version of the set to avoid an unnecessarily complicated inventory.

Author:

mjwest83

Posted:

Dec 5, 2018 11:54

Subject:

Inventory Change Request for Set 76075-1

Viewed:

20 times

Topic:

Status:

Open

Please make changes to the following inventory:

76075-1 (Inv) Wonder Woman Warrior Battle
277 Parts, 2 Minifigures, 2017
Sets: Super Heroes: Wonder Woman

* Add 1 Part 15068pb154L Dark Bluish Gray Slope, Curved 2 x 2 No Studs with Dark Tan Belt over Pearl Dark Gray Armor Model Left Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 15068pb154R Dark Bluish Gray Slope, Curved 2 x 2 No Studs with Dark Tan Belt over Pearl Dark Gray Armor Model Right Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 3068bpb1193 Dark Bluish Gray Tile 2 x 2 with Dark Tan Belt over Pearl Dark Gray Armor Center Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 87079pb532 Dark Bluish Gray Tile 2 x 4 with Pearl Dark Gray Armor and Metallic Silver Spikes on Reddish Brown Sash Lower Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 87079pb531 Dark Bluish Gray Tile 2 x 4 with Pearl Dark Gray Armor, Dark Tan Fur, and Metallic Silver Spikes on Reddish Brown Sash Upper Pattern (Sticker) - Set 76075 (Counterpart)

Comments from Submitter:
Stickered items for Ares.

Author:

littlepb

Posted:

Dec 5, 2018 11:34

Subject:

Re: 60592c01 - whos idea was this?

Viewed:

41 times

Topic:

In Catalog, mhortar writes:

In Catalog, brox999 writes:

In Catalog, SylvainLS writes:

In Catalog, brox999 writes:

[…]
[3930c01] is in many new sets

Not.
The hinge brick and the hinge plate always came separated.

and I need
the ability to add this part to my store inventory in a new state […]

This assembly can’t be New: you have assembled the parts yourself, that’s the
definition of Used.

Rubbish, putting two brand new, unused parts together does not make them used.
I list the assembly as new if the parts came from a sealed set

You assembled the parts. That's literally the definition of what makes them
used (previously assembled). You can't build a set and then sell it as 'new,
only assembled once'. There was a big argument a few years ago about whether
stacking bricks/plates at the Pick-A-Brick wall made them 'used' instead
of 'new' (my opinion is yes). There's also the argument that minifigs
can't be sold as 'new' if they are assembled (I'm on the fence
about this one).

Josh

Josh

I personally think that assembled hinges can be marked as new because they have
not been taken apart and if a buyer wants separated parts, they can order them
separately. Maybe there should be an option for marking the condition of inventories
as "new but assembled".

Author:

littlepb

Posted:

Dec 5, 2018 11:12

Subject:

Re: Large Macaroni tile in classic blue?

Viewed:

33 times

Topic:

In Catalog, Hygrotus writes:

In General, celloguy writes:

So on the page for this part someone had photographed a macaroni tile in classic
blue which isn’t in any set. Is it coming out soon? If not, maybe it should be
removed? I really want one of these bug assume it’s a prototype for the time
being?

https://www.bricklink.com/v2/catalog/catalogitem.page?P=27507&name=Tile,%20Round%20Corner%204%20x%204%20Macaroni%20Wide&category=%5BTile,%20Round%5D#T=C

Isn't this part on real photo there just dark azure, but it's look like
this due to lighting condition of photo?

I think that that's what it is

Author:

yorbrick

Posted:

Dec 5, 2018 09:19

Subject:

Re: 60592c01 - whos idea was this?

Viewed:

45 times

Topic:

It has been sometime I am thinking about this one:
Does opening the screws (located on the top) and removing the motor housing in
order to check the production date make this old motors used? (these motors were
not sealed in any way, so opening the motor is very easy: one only need to open
the screws)

x469b (Inv) Electric, Motor 4.5V Type C 12 x 4 x 3 1/3 (Train)
Parts: Electric, Motor

I'd say used, as there is the possibility of damage when opening it. Of course,
you could test it by applynig power to it, but that makes it used. There will
also be minor wear on the screws, just like clicking two bricks together and
unclicking them causes wear and makes them used.

Author:

yorbrick

Posted:

Dec 5, 2018 09:17

Subject:

Re: 60592c01 - whos idea was this?

Viewed:

39 times

Topic:

Just to correct that, the argument about minifigures is can a seller assemble
them and still call them new. There is no argument about can a minifigure be
new if it is assembled - the answer is clearly yes, as in some cases LEGO sells
assembled minifigures and by definition those assembled minifigures can be new
as that is how they were sold.

Author:

SylvainLS

Posted:

Dec 5, 2018 07:26

Subject:

Re: 60592c01 - whos idea was this?

Viewed:

76 times

Topic:

In Catalog, SezaR writes:

[…]
It has been sometime I am thinking about this one:
Does opening the screws (located on the top) and removing the motor housing in
order to check the production date make this old motors used? (these motors were
not sealed in any way, so opening the motor is very easy: one only need to open
the screws)

x469b (Inv) Electric, Motor 4.5V Type C 12 x 4 x 3 1/3 (Train)
Parts: Electric, Motor

Well, the definition says New should have been manipulated for sorting only.
Opening isn’t sorting… unless you sort by production date

Now, it’s about screws, not clicking plastic parts, so it’s less “Used” than,
say, removing arms from a torso, but some may see it as “Used” nonetheless.

Author:

Teup

Posted:

Dec 5, 2018 07:22

Subject:

Re: Automatic price while listing items

Viewed:

33 times

Topic:

Suggestions

In Suggestions, EpicBigG writes:

I hope bricklink sees this!

They do, but they won't do anything.

Author:

TakeAbricK

Posted:

Dec 5, 2018 06:05

Subject:

Inventory Change Request for Set 809-1

Viewed:

25 times

Topic:

Status:

Open

Please make changes to the following inventory:

809-1 (Inv) Doors and Windows
36 Parts, 1986
Sets: Universal Building Set: Supplemental

* Change 1 Part Red {73436 Door 1 x 4 x 5 Left - (MARKED FOR DELETION - Undetermined Glass Color Version) to 73436c01 Door 1 x 4 x 5 Left with Trans-Clear Glass}
* Change 1 Part Red {73435 Door 1 x 4 x 5 Right - (MARKED FOR DELETION - Undetermined Glass Color Version) to 73435c01 Door 1 x 4 x 5 Right with Trans-Clear Glass}

Comments from Submitter:
Source: Sealed Set

Author:

SezaR

Posted:

Dec 5, 2018 05:20

Subject:

Re: Inventory Change Request for Set 7735-1

Viewed:

18 times

Topic:

In Inventories Requests, randyf writes:

OK, got it.

By the way, thanks very much for helping me with these inventory changes. If
you can find any evidence for any other sets in the 1980-1992 range that included
1x1 round plates, it would be greatly appreciated.

Cheers,
Randy

You are welcome.

It seems I ran out of photo for now! (but I will double-check)

Cheers
Reza

In Inventories Requests, SezaR writes:

In Inventories Requests, randyf writes:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

7735-1 (Inv) Freight Train
492 Parts, 2 Minifigures, 1985
Sets: Train: 12V

* Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 6 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue

Reza -

Assuming that you know where the images are located on the web, could you please
add hyperlinks to where you find the images in your requests?

The hyperlinks may not always be valid, but at least I can look them over for
now.

Thanks,
Randy

Randy,

I have saved many photos of used, MISB, or sealed copies for various train sets
from 80s and even before 80s. I got them either from their owners or from past
auctions. So I cannot always find any link as those links are mostly broken by
now. My friend Morris (lego.12vtrains) has saved many photos since 2014-15 and
shared them with me.

For this set, I have photos of many copies. I have also bought an MISB one and
it is currently in the custom office.

One photo is taken from the store Bluxe. You can find easily his photos on facebook.
Search Bluxe. (can I add a link to facebook here?)
Nkiss82 sent me photos of his MISB copy. I used them already for this request:
https://www.bricklink.com/messageThread.asp?ID=244678

Thanks,
Reza

Author:

SezaR

Posted:

Dec 5, 2018 05:11

Subject:

Re: Inventory Change Request for Set 6982-1

Viewed:

11 times

Topic:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, SezaR writes:

* Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder

You wanted to delete tire to this wheel assembly rather than plate, yes?

Based on this mistake, if you revoke all my honored points, it is fair and I
don't complain

Author:

SezaR

Posted:

Dec 5, 2018 05:09

Subject:

Re: Inventory Change Request for Set 6982-1

Viewed:

13 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

6982-1 (Inv) Explorien Starship
635 Parts, 4 Minifigures, 1996
Sets: Space: Exploriens

* Delete 4 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}

Author:

SezaR

Posted:

Dec 5, 2018 05:09

Subject:

Inventory Change Request for Set 6982-1

Viewed:

18 times

Topic:

Status:

Open

Please make changes to the following inventory:

6982-1 (Inv) Explorien Starship
635 Parts, 4 Minifigures, 1996
Sets: Space: Exploriens

Author:

SezaR

Posted:

Dec 5, 2018 05:08

Subject:

Re: Inventory Change Request for Set 6982-1

Viewed:

10 times

Topic:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, SezaR writes:

* Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder

You wanted to delete tire to this wheel assembly rather than plate, yes?

hmmmm, that seems to be a historic mistake!

Author:

Hygrotus

Posted:

Dec 5, 2018 04:50

Subject:

Re: Large Macaroni tile in classic blue?

Viewed:

40 times

Topic:

In General, celloguy writes:

Isn't this part on real photo there just dark azure, but it's look like
this due to lighting condition of photo?

Author:

Hygrotus

Posted:

Dec 5, 2018 04:47

Subject:

Re: Inventory Change Request for Set 6982-1

Viewed:

12 times

Topic:

In Inventories Requests, SezaR writes:

* Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder

You wanted to delete tire to this wheel assembly rather than plate, yes?

Author:

celloguy

Posted:

Dec 5, 2018 04:27

Subject:

Large Macaroni tile in classic blue?

Viewed:

97 times

Topic:

Status:

Open

Author:

SezaR

Posted:

Dec 5, 2018 04:24

Subject:

Re: Inventory Change Request for Set 6982-1

Viewed:

9 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

6982-1 (Inv) Explorien Starship
635 Parts, 4 Minifigures, 1996
Sets: Space: Exploriens

* Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}

Author:

SezaR

Posted:

Dec 5, 2018 04:24

Subject:

Inventory Change Request for Set 6982-1

Viewed:

17 times

Topic:

Status:

Open

Please make changes to the following inventory:

6982-1 (Inv) Explorien Starship
635 Parts, 4 Minifigures, 1996
Sets: Space: Exploriens

Author:

Andrsv

Posted:

Dec 5, 2018 02:13

Subject:

Re: Automatic price while listing items

Viewed:

26 times

Topic:

Suggestions

In Suggestions, Rainey writes:

I just bought a MacBook Pro and it is very fast! But it has got me wishing that
Bricklink had a seller feature that would automatically have the average price
(or what ever price you set it as) put in the box while adding items like brickOwl
does. I also love how brickOwl has the option to add the same part in multiple
colors at the same time and I really wish Bricklink had the same! I also like
it that if I posted a suggestion in the BrickOwl Forum for a new seller feature,
it would be done in a matter of a few minutes (most likely). I hope this seller
feature suggestion can be acted upon quickly and not years later to never.
Rainey

I agree 100% with everything you ask for!

Author:

randyf

Posted:

Dec 5, 2018 01:17

Subject:

Re: Inventory Change Request for Set 6604-1

Viewed:

17 times

Topic:

In Inventories Requests, randyf writes:

Please make changes to the following inventory:

6604-1 (Inv) Formula-I Racer
22 Parts, 1 Minifigure, 1985
Sets: Town: Classic Town: Race

* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}
* Change {2 to 1} Part Trans-Red {4073 Plate, Round 1 x 1 Straight Side to 4073c01 Plate, Round 1 x 1, 2 on Sprue}

Comments from Submitter:
Images to follow.

Set unboxing can be found here: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=403815

Additional note:

The helmet for

Minifig No: pln051 Name: Plain Black Torso with Black Arms, Black Legs, White Classic Helmet

pln051 (Inv) Plain Black Torso with Black Arms, Black Legs, White Classic Helmet
Minifigures: Town: Classic Town

from this set unboxing is

193b2 Minifigure, Headgear Helmet Space / Town with Thick Chin Strap - with Visor Dimples
Parts: Minifigure, Headgear

Author:

randyf

Posted:

Dec 5, 2018 01:05

Subject:

Inventory Change Request for Set 6604-1

Viewed:

23 times

Topic:

Status:

Open

Please make changes to the following inventory:

6604-1 (Inv) Formula-I Racer
22 Parts, 1 Minifigure, 1985
Sets: Town: Classic Town: Race

Author:

randyf

Posted:

Dec 5, 2018 00:46

Subject:

Re: Inventory Change Request for Set 7735-1

Viewed:

16 times

Topic:

OK, got it.

In Inventories Requests, randyf writes:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

7735-1 (Inv) Freight Train
492 Parts, 2 Minifigures, 1985
Sets: Train: 12V

Author:

SezaR

Posted:

Dec 5, 2018 00:17

Subject:

Re: 60592c01 - whos idea was this?

Viewed:

50 times

Topic:

In Catalog, SylvainLS writes:

In Catalog, brox999 writes:

[…]
[3930c01] is in many new sets

Not.
The hinge brick and the hinge plate always came separated.

and I need
the ability to add this part to my store inventory in a new state […]

This assembly can’t be New: you have assembled the parts yourself, that’s the
definition of Used.

x469b (Inv) Electric, Motor 4.5V Type C 12 x 4 x 3 1/3 (Train)
Parts: Electric, Motor

Author:

mhortar

Posted:

Dec 5, 2018 00:04

Subject:

Re: 60592c01 - whos idea was this?

Viewed:

57 times

Topic:

In Catalog, brox999 writes:

In Catalog, SylvainLS writes:

In Catalog, brox999 writes:

[…]
[3930c01] is in many new sets

Not.
The hinge brick and the hinge plate always came separated.

and I need
the ability to add this part to my store inventory in a new state […]

This assembly can’t be New: you have assembled the parts yourself, that’s the
definition of Used.

Rubbish, putting two brand new, unused parts together does not make them used.
I list the assembly as new if the parts came from a sealed set

Author:

SezaR

Posted:

Dec 4, 2018 23:27

Subject:

Re: Inventory Change Request for Set 7735-1

Viewed:

19 times

Topic:

In Inventories Requests, randyf writes:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

7735-1 (Inv) Freight Train
492 Parts, 2 Minifigures, 1985
Sets: Train: 12V

Author:

SezaR

Posted:

Dec 4, 2018 23:18

Subject:

Re: Inventory Change Request for Set 6686-1

Viewed:

14 times

Topic:

https://www.bricklink.com/message.asp?ID=1118337

In Inventories Requests, elias3 writes:

Please make changes to the following inventory:

6686-1 (Inv) Backhoe
79 Parts, 1 Minifigure, 1984
Sets: Town: Classic Town: Construction

* Add 1 Part 6686stk01 (Not Applicable) Sticker for Set 6686 - (195055) (match ID 99)
* Add 1 Part 3010 White Brick 1 x 4 (match ID 99)
* Change 1 Part White 3010p06 Brick 1 x 4 with Red Danger Stripes on Un-Printed Background Pattern {Regular to Alternate} {match ID 0 to 99}

Comments from Submitter:
This stickersheet came in early releases of this set. add also the regular 1x4 bricks and the already in pattern red/white stripes pattern move to the alt. section. So make the '99' MID.

Author:

SezaR

Posted:

Dec 4, 2018 23:16

Subject:

Re: Inventory Change Request for Set 6686-1

Viewed:

20 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

6686-1 (Inv) Backhoe
79 Parts, 1 Minifigure, 1984
Sets: Town: Classic Town: Construction

* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue

My copy is 66%-NIB! One bag out of three is opened (the one including (4073c01
trans-yellow) and two white printed tiles
[p=3068bp06]
and
[p=3068bp50]
and also two white rounded bricks
[p=3062b]
were removed. All the other parts are present.
My copy was the source of this inventory change request:
https://www.bricklink.com/messageThread.asp?ID=244606

The white brick

3010 Brick 1 x 4
Parts: Brick

without pattern can be seen in one sealed bag.

Author:

randyf

Posted:

Dec 4, 2018 23:12

Subject:

Re: Inventory Change Request for Set 7735-1

Viewed:

13 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

7735-1 (Inv) Freight Train
492 Parts, 2 Minifigures, 1985
Sets: Train: 12V

Author:

SezaR

Posted:

Dec 4, 2018 23:10

Subject:

Inventory Change Request for Set 6686-1

Viewed:

23 times

Topic:

Status:

Open

Please make changes to the following inventory:

6686-1 (Inv) Backhoe
79 Parts, 1 Minifigure, 1984
Sets: Town: Classic Town: Construction

* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue

Author:

SezaR

Posted:

Dec 4, 2018 22:53

Subject:

Re: Inventory Change Request for Set 7735-1

Viewed:

16 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

7735-1 (Inv) Freight Train
492 Parts, 2 Minifigures, 1985
Sets: Train: 12V

Author:

SezaR

Posted:

Dec 4, 2018 22:51

Subject:

Inventory Change Request for Set 7735-1

Viewed:

16 times

Topic:

Status:

Open

Please make changes to the following inventory:

7735-1 (Inv) Freight Train
492 Parts, 2 Minifigures, 1985
Sets: Train: 12V

Author:

brox999

Posted:

Dec 4, 2018 22:31

Subject:

Re: 60592c01 - whos idea was this?

Viewed:

56 times

Topic:

In Catalog, SylvainLS writes:

In Catalog, brox999 writes:

[…]
[3930c01] is in many new sets

Not.
The hinge brick and the hinge plate always came separated.

and I need
the ability to add this part to my store inventory in a new state […]

This assembly can’t be New: you have assembled the parts yourself, that’s the
definition of Used.

Rubbish, putting two brand new, unused parts together does not make them used.
I list the assembly as new if the parts came from a sealed set

Author:

StormChaser

Posted:

Dec 4, 2018 21:21

Subject:

Re: Bored? I Need Help

Viewed:

58 times

Topic:

In General, StormChaser writes:

I am absolutely going to need help with these definitions

I'll do:

2nd Section: F, G, H, I, J

This only leaves the 4th and 5th sections which still need to be worked on.

Author:

randyf

Posted:

Dec 4, 2018 18:12

Subject:

Re: 40292 minifig error

Viewed:

28 times

Topic:

In Catalog, StormChaser writes:

In Catalog, randyf writes:

However, when it comes to adding minifigures to the catalog, the guidelines are
clear and were followed: https://www.bricklink.com/help.asp?helpID=2477

I need to make it clear that these are not official guidelines. I have been
working on a project to rework the catalog Help Center and the page linked to
above is a proposed page which is not yet complete or official.

The current catalog guidelines still in effect are only those on the left
side of this page:

https://www.bricklink.com/help.asp?topicID=21

The sections on the right side of the page are proposals and are works in progress.

My bad, Robert. I forgot that those sections were the "work in progress" ones.

The section that I was referencing about minifigures being added to the catalog
in your new version contains the same basic information as the old version but
worded in a much friendlier way.

Therefore, everything that I posted is not
affected by which version someone references.

The page I should have referred to was https://www.bricklink.com/help.asp?helpID=71

Cheers,
Randy

Author:

axaday

Posted:

Dec 4, 2018 18:04

Subject:

Re: 40292 minifig error

Viewed:

25 times

Topic:

In Catalog, Teup writes:

Well, I actually agree with yorbrick the "boy" should be added to the catalog.
I understand the Bricklink catalog follows the instructions and that is a good
and smart choice, but how far will we go? When I saw the set my first thought
was like "only a girl? oh wait a sec, there's the boy hair" and the box literally
has the boy on the side of the box. To me the hair seems off on the dad and he's
not shown that way either. Nor is it logical that a minifig has an extra piece
to make a marginally different minifig with no different meaning. The torso of
the child is clearly unisex (if not boyish) so in my opinion everything points
to the hairpiece being intended for the child.

If so, it begs the question if we really want to stick 100% to the instructions
in every case. I think at least adding minfigs that are shown on the box as alternates
is not such a stretch.

I think you are not asking for what we ultimately want, perhaps because you are
aware that it is as far as we can get without the programmers getting involved.
What we ultimately want is to be able to put alternates into minifig inventories.

There are quite a LOT of minifigs the last few years that come with a hair and
a hat, usually pictured somewhere with each. I think it would clutter things
up a lot. Look at [s-60134-1] and

60153-1 (Inv) People pack - Fun at the beach
104 Parts, 15 Minifigures, 2017
Sets: Town: City: Recreation

. They have a certain way they
are designed to go, but the instructions show some pictures of them all mixed
and matched, legs, torsos, heads and hair. They each have 15 minifigs. How
many variants does that inventory need to have in it?

Author:

StormChaser

Posted:

Dec 4, 2018 17:38

Subject:

Re: 40292 minifig error

Viewed:

41 times

Topic:

In Catalog, randyf writes:

However, when it comes to adding minifigures to the catalog, the guidelines are
clear and were followed: https://www.bricklink.com/help.asp?helpID=2477

Author:

Hygrotus

Posted:

Dec 4, 2018 16:04

Subject:

Re: 42082 extra items

Viewed:

40 times

Topic:

In Inventories, xxxzanka writes:

It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo

Tile not plate, sorry

Yes you have right it is visible in this review
https://youtu.be/FTrlyFYOoes?t=21m13s

Please consider submiting invetory change request here
https://www.bricklink.com/catalogInvChange.asp?itemType=S

BTW Are you able to check rest of the inventory. Parts count on box is 4057.
Currently in this inventory we have 4056 parts. Is there missing something more?

Author:

xxxzanka

Posted:

Dec 4, 2018 15:56

Subject:

Re: 42082 extra items

Viewed:

28 times

Topic:

In Inventories, xxxzanka writes:

It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo

Tile not plate, sorry

Author:

xxxzanka

Posted:

Dec 4, 2018 15:53

Subject:

42082 extra items

Viewed:

76 times

Topic:

Status:

Open

It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo

Author:

randyf

Posted:

Dec 4, 2018 13:28

Subject:

Re: 40292 minifig error

Viewed:

32 times

Topic:

In Catalog, axaday writes:

In Catalog, Teup writes:

Nor is it logical that a minifig has an extra piece
to make a marginally different minifig with no different meaning.

40197-1 (Inv) Wedding Favor Set 2018
124 Parts, 2 Minifigures, 2018
Sets: Holiday & Event: Wedding

And that is what we refer to as the "slippery slope".

Randy

Author:

randyf

Posted:

Dec 4, 2018 13:24

Subject:

Re: 40292 minifig error

Viewed:

27 times

Topic:

In Catalog, Teup writes:

Well, I actually agree with yorbrick the "boy" should be added to the catalog.

Your opinion has been noted and future admin teams may decide to go in that direction.
However, the current admin team on both the catalog and inventory sides had discussions
and agreed on how to proceed in this situation. I do not see that changing for
the foreseeable future.

I understand the Bricklink catalog follows the instructions and that is a good
and smart choice, but how far will we go?

There are a few other situations like this that I know of from my personal collection.
In all of those cases, the current guidelines that are in place were followed
in the catalog and subsequently the inventories. So, for now, it makes sense
to keep things consistent with the guidelines to keep the catalog consistent.

To me the hair seems off on the dad and he's not shown that way either.

First of all, you are assuming that it is a dad, but I do to. What is not an
assumption is that he *is* shown that way in one version of the instructions:
https://www.bricklink.com/message.asp?ID=1117220

Nor is it logical that a minifig has an extra piece to make a marginally different
minifig with no different meaning.

Since when was LEGO logical?

They already had *two* attempts at this, and
according to you, they screwed up on both of them. Who are we to say that it
is not the way they intended it? Third time's a charm?

The torso of the child is clearly unisex (if not boyish)

If the torso is *clearly* unisex, then how could it be "boyish"?

so in my opinion everything points to the hairpiece being intended for the child.

If so, it begs the question if we really want to stick 100% to the instructions
in every case.

As I stated above, at least for the foreseeable future, the answer is "yes".
If Robert, Ronald and Maggie want to add this topic to the Catalog Roadmap, then
I don't see why it could not be considered. I would not expect it to have
any sort of large priority, though.

Thanks for your comments,
Randy

Author:

axaday

Posted:

Dec 4, 2018 13:16

Subject:

Re: 40292 minifig error

Viewed:

29 times

Topic:

In Catalog, Teup writes:

Nor is it logical that a minifig has an extra piece
to make a marginally different minifig with no different meaning.

40197-1 (Inv) Wedding Favor Set 2018
124 Parts, 2 Minifigures, 2018
Sets: Holiday & Event: Wedding

Author:

Teup

Posted:

Dec 4, 2018 12:33

Subject:

Re: 40292 minifig error

Viewed:

39 times

Topic:

In Catalog, randyf writes:

In Catalog, yorbrick writes:

Although they cannot sell it as a boy as depicted on the box, unless listed as
a custom minifig. No doubt in time people will wonder which minifigure they have
and not be able to match up the boy version with a minifigure in the catalogue.

Many questions come up in the forum to identify minifigures that have the wrong
hands, the wrong arms, the wrong legs, the wrong head, the wrong hair, etc. Such
is the nature of LEGO parts; they get played with and mixed up all the time.
Sellers are free to sell those minifigures as "customs", but it behooves them
to find a closely related minifigure in the catalog to sell under and either
sell it as incomplete or fix the minifigure they have to match the one in the
catalog. I don't see this scenario as being any different to that.

However, when it comes to adding minifigures to the catalog, the guidelines are
clear and were followed: https://www.bricklink.com/help.asp?helpID=2477

If they weren't followed, we would have the inevitable question, "Why was
this boy minifigure added to the catalog when it clearly isn't shown in the
instructions?"

Cheers,
Randy

Author:

normann1974

Posted:

Dec 4, 2018 12:33

Subject:

Inventory Change Request for Set 10259-1

Viewed:

19 times

Topic:

Status:

Open

Please make changes to the following inventory:

10259-1 (Inv) Winter Village Station
881 Parts, 5 Minifigures, 2017
Sets: Creator: Creator Expert: Winter Village Collection: Holiday & Event: Christmas

* Change 2 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}

Comments from Submitter:
Source: Sealed set just opened. LBG with groove, DBG without.

Author:

normann1974

Posted:

Dec 4, 2018 12:27

Subject:

Inventory Change Request for Set 10259-1

Viewed:

15 times

Topic:

Status:

Open

Please make changes to the following inventory:

10259-1 (Inv) Winter Village Station
881 Parts, 5 Minifigures, 2017
Sets: Creator: Creator Expert: Winter Village Collection: Holiday & Event: Christmas

* Add 2 Part bb219 Dark Bluish Gray Train, Track Plastic (RC Trains) Connection/Stacking Pin for Track Storage (Extra)

Comments from Submitter:
I wonder why this is missing from the current inventory. Anyway, it was (as expected) in the stack o'tracks in the set I just opened and built. This inventory is also missing all stickered parts. I'll probably do them when I disassemble my set after Christmas.

Author:

randyf

Posted:

Dec 4, 2018 12:27

Subject:

Re: 40292 minifig error

Viewed:

29 times

Topic:

In Catalog, yorbrick writes:

Cheers,
Randy

Author:

elias3

Posted:

Dec 4, 2018 10:52

Subject:

Re: Inventory Change Request for Set 7745-1

Viewed:

18 times

Topic:

In Inventories Requests, elias3 writes:

Please make changes to the following inventory:

7745-1 (Inv) High-Speed City Express Passenger Train
695 Parts, 10 Minifigures, 1985
Sets: Train: 12V

* Delete 4 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 4 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 2 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 2 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue

See also post from Reza: https://www.bricklink.com/message.asp?ID=1086785

Author:

elias3

Posted:

Dec 4, 2018 10:43

Subject:

Inventory Change Request for Set 7745-1

Viewed:

30 times

Topic:

Status:

Open

Please make changes to the following inventory:

7745-1 (Inv) High-Speed City Express Passenger Train
695 Parts, 10 Minifigures, 1985
Sets: Train: 12V

Author:

yorbrick

Posted:

Dec 4, 2018 08:50

Subject:

Re: 40292 minifig error

Viewed:

38 times

Topic:

And anyone can change the interpretation (and minifigs) to better represent their
own situation.

Author:

Teup

Posted:

Dec 4, 2018 08:21

Subject:

Re: 40292 minifig error

Viewed:

27 times

Topic:

In Catalog, SylvainLS writes:

In Catalog, Teup writes:

[…]

Haha that's crazy, seems the person making the instructions made the mistake.
I guess Bricklink follows the instructions and not the box, so probably it should
stay like this then... Although unless dad has a job as a hairdresser or fashion
designer I do think he looks a bit off with that kids/teenage haircut

Well, we’re assuming it’s a “dad”. It could be a “big brother” or a “young uncle”
too

And anyone can change the interpretation (and minifigs) to better represent their
own situation.

I guess if dad really is a hairdresser or fashion designer, the girl's hair
could be even better

Author:

SylvainLS

Posted:

Dec 4, 2018 07:23

Subject:

Re: 40292 minifig error

Viewed:

41 times

Topic:

In Catalog, Teup writes:

[…]

Well, we’re assuming it’s a “dad”. It could be a “big brother” or a “young uncle”
too

And anyone can change the interpretation (and minifigs) to better represent their
own situation.

Author:

Teup

Posted:

Dec 4, 2018 07:10

Subject:

Re: 40292 minifig error

Viewed:

43 times

Topic:

In Catalog, SylvainLS writes:

In Catalog, Teup writes:

40292-1 (Inv) Christmas Gift Box
293 Parts, 2 Minifigures, 2018
Sets: Holiday & Event: Christmas

LOL, so the Christmas giftset 40292 has a male and a female hairpiece so that
the child can be a boy or a girl (and they're both on the box). But someone
uploaded a picture where the alternate hair is put on the DAD's head, kind
of making it a dad's hairdo optionality feature

https://www.bricklink.com/catalogItemInv.asp?S=40292-1

Actually, it IS a “dad’s hairdo optionality feature”: there are two versions
of the instructions and each one uses different hair for the dad.
See https://www.bricklink.com/message.asp?ID=1117220

Author:

SylvainLS

Posted:

Dec 4, 2018 06:56

Subject:

Re: 40292 minifig error

Viewed:

39 times

Topic:

In Catalog, Teup writes:

40292-1 (Inv) Christmas Gift Box
293 Parts, 2 Minifigures, 2018
Sets: Holiday & Event: Christmas

https://www.bricklink.com/catalogItemInv.asp?S=40292-1

Author:

Teup

Posted:

Dec 4, 2018 06:32

Subject:

40292 minifig error

Viewed:

130 times

Topic:

Status:

Open

40292-1 (Inv) Christmas Gift Box
293 Parts, 2 Minifigures, 2018
Sets: Holiday & Event: Christmas

https://www.bricklink.com/catalogItemInv.asp?S=40292-1

Author:

SezaR

Posted:

Dec 4, 2018 03:46

Subject:

Re: Inventory Change Request for Set 7839-1

Viewed:

17 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

7839-1 (Inv) Car Transport Depot
325 Parts, 2 Minifigures, 1986
Sets: Train: 12V

* Delete 4 Part 3641 Black Tire 15mm D. x 6mm Offset Tread Small
* Delete 4 Part 4624 Light Gray Wheel 8mm D. x 6mm
* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Change 4 Part Light Gray 4624c02 Wheel 8mm D. x 6mm with Black Tire 15mm D. x 6mm Offset Tread Small (4624 / 3641) {Counterpart to Regular}

Photos 1 and 2 from here:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=300763

Photos 3 and 4 from some old item on facebook.

Author:

SezaR

Posted:

Dec 4, 2018 03:42

Subject:

Inventory Change Request for Set 7839-1

Viewed:

14 times

Topic:

Status:

Open

Please make changes to the following inventory:

7839-1 (Inv) Car Transport Depot
325 Parts, 2 Minifigures, 1986
Sets: Train: 12V

Author:

SezaR

Posted:

Dec 4, 2018 03:34

Subject:

Re: Inventory Change Request for Set 7823-1

Viewed:

28 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

7823-1 (Inv) Container Crane Depot
467 Parts, 2 Minifigures, 1986
Sets: Train: 12V

* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (Extra)

http://www.brickshelf.com/cgi-bin/gallery.cgi?f=558274

http://www.brickshelf.com/gallery/Jojo/sets/7823/7823-06.jpg

Author:

SezaR

Posted:

Dec 4, 2018 03:34

Subject:

Inventory Change Request for Set 7823-1

Viewed:

20 times

Topic:

Status:

Open

Please make changes to the following inventory:

7823-1 (Inv) Container Crane Depot
467 Parts, 2 Minifigures, 1986
Sets: Train: 12V

* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 3070b Red Tile 1 x 1 with Groove (Extra)

Author:

SezaR

Posted:

Dec 4, 2018 02:53

Subject:

Re: Inventory Change Request for Set 6391-1

Viewed:

16 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

6391-1 (Inv) Cargo Center
530 Parts, 5 Minifigures, 1984
Sets: Town: Classic Town: Cargo

* Delete 2 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue

Author:

SezaR

Posted:

Dec 4, 2018 02:51

Subject:

Inventory Change Request for Set 6391-1

Viewed:

18 times

Topic:

Status:

Open

Please make changes to the following inventory:

6391-1 (Inv) Cargo Center
530 Parts, 5 Minifigures, 1984
Sets: Town: Classic Town: Cargo

Author:

FreeStorm

Posted:

Dec 4, 2018 02:35

Subject:

Re: Inventory Change Request for Set 6392-1

Viewed:

20 times

Topic: