Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | StormChaser  | | Posted: | Dec 5, 2018 18:12 | | Subject: | Re: Inventory Change Request for Set 9252-2 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, 69transamman writes:
| | I just have to say that no matter what the subject is, I always read thru your
post completely in search of the humor you often interject!
|
Aww, thanks! That made my day.
Nope. You may not believe this, but I have never even tasted alcohol and have
never experimented with drugs. I don't use caffeine. I smoke cigarettes
and that's it.
I don't think there's a thing wrong with drug or alcohol use, but I have
always preferred to be in control of my own mind. I do, however, think that life
is something of an absurdity and a joke and I intend to laugh at it whilst I
am able in whatever ways I find.
|
 |
| Author: | normann1974 | | Posted: | Dec 5, 2018 18:01 | | Subject: | Re: Brown vs reddish brown cape | | Viewed: | 28 times | | Topic: | Colors | |
| In Colors, SylvainLS writes:
| | In Colors, normann1974 writes:
| | […]
So what do you say? Are they still considered to be the same color although they
seem not to be?
|
Er, now they look aubergine (egg plant / dark purple), not (reddish) brown.
|
Yeah, that picture wasn't any good. I think my camera get confused by the
wood color of my table.
Here's another pic of the two capes from the 7665 set (left, middle) set
and one from 7965 (right, guaranteed reddish brown). Well, the capes are actually
three shades of brown, the rightmost is the darkest. Now I'm totally confused.
/Jan
|
|
|
| Author: | StormChaser | | Posted: | Dec 5, 2018 17:53 | | Subject: | Re: Inventory Change Request for Set 9252-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | Am creating a new catalog entry for the early version of the set
|
Note that the later version of the set included 13 sealed bags instead of the
12 bags from the first version. An attached photo from an auction site shows
the contents of the later set, although the green large bricks are not visible
in the photo.
Also, the date printed on the activity/instructions cards is 1994, but the date
printed on the cover/inventory card is 1993. The actual date of re-release is
unknown. I went with 1994, but it could have been earlier.
|
|
|
| Author: | FreeStorm | | Posted: | Dec 5, 2018 17:50 | | Subject: | Inventory Change Request for Set 6672-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium
* Delete 2 Part 4073 Light Gray Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Light Gray Plate, Round 1 x 1, 2 on Sprue
* Delete 2 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side
* Add 1 Part 4073c01 Trans-Yellow Plate, Round 1 x 1, 2 on Sprue
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Delete 1 Part 4073 Light Gray Plate, Round 1 x 1 Straight Side (Extra)
* Delete 1 Part 4073 Trans-Yellow Plate, Round 1 x 1 Straight Side (Extra)
* Change 4 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}
Comments from Submitter:
Source:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=268726
and
https://www.brickpirate.net/forum/phpBB3/viewtopic.php?f=18&t=21575&p=511867&hilit=review
PS: as you can see on both link, the minifigs come partially assembled.
A can't see minifig head studs on picture.
|
|
| Author: | 69transamman | | Posted: | Dec 5, 2018 17:49 | | Subject: | Re: Inventory Change Request for Set 9252-2 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| I just have to say that no matter what the subject is, I always read thru your
post completely in search of the humor you often interject! Doesn't matter
to me if it's natural, drug or alcohol induced, sleep deprivation, or simply
that the rest of bricklink has driven you mad---I appreciate a good chuckle/chortle/guffaw!
Thanks for all you do!
Howard
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, StormChaser writes:
I wanted to include some additional information about this set for future reference
and an inventory change is the best way to do that.
First, I personally and carefully checked every single brick in this set from
sealed contents for which I opened every bag and handled the parts (photos of
my set attached). Mine was the early version of the set released in 1991 and
there were 12 bags in the set. All of the bricks included cross supports except
a single 2 x 3 brick in yellow (the other 11 of the same brick had cross supports).
This is a late appearance for this brick (two years late according to BrickLink's
current timeline) and I was surprised to find it, but there it was.
As for inside supports, those little ridges inside the brick which are only currently
distinguished for one brick (the Brick 2 x 2 without Inside Supports in case
the title or part number changes in the future):
All bricks in the set, including those with designs, had these ridges with the
exceptions listed below. I mention this because it will be useful data if we
decide to distinguish these parts in the future (I compared the parts listed
below (except the last two, for which I had no comparison parts) to recent examples
and all of the newer bricks I checked had inside supports).
The aforementioned 2 x 3 brick in yellow without cross supports.
All 2 x 6 bricks in the set.
All 2 x 8 bricks in the set.
All 2 x 10 bricks in the set.
All 4 x 12 bricks in the set.
All 8 x 16 bricks in the set.
The empty window frames had hollow studs as I indicated in the inventory. The
bricks with eyes had no white included as indicated in the inventory.
Finally, and I really don't think we'd ever distinguish this difference,
exactly half of the doors and windows were attached to the left and half to the
right. So two doors attached facing left and four windows attached facing left
and the same number of each facing right. TLG did not distinguish this difference
and I see no need for us to. The door and window directions are easily reversible.
The complete contents of the set are the storage case with no lid, 12 bags of
parts and four green large bricks loose, the cover/inventory cardboard with nothing
printed on the other side, four double-sided activity/instructions cards, and
the informational sheet of paper. All of these are included in an outer original
box with the set number printed thereupon. I have the activity cards from the
1994 version and verified that each of these was different than the 1991 version
in spite of having the same 6-digit identification number printed on each card
for both versions.
I'm certain this last bit has no relevance whatsoever to the discussion,
but I mention it for the sake of completeness: my second cousin's first name
is Frank.
|
|
|
| Author: | StormChaser | | Posted: | Dec 5, 2018 17:34 | | Subject: | Re: Inventory Change Request for Set 9252-2 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
I wanted to include some additional information about this set for future reference
and an inventory change is the best way to do that.
First, I personally and carefully checked every single brick in this set from
sealed contents for which I opened every bag and handled the parts (photos of
my set attached). Mine was the early version of the set released in 1991 and
there were 12 bags in the set. All of the bricks included cross supports except
a single 2 x 3 brick in yellow (the other 11 of the same brick had cross supports).
This is a late appearance for this brick (two years late according to BrickLink's
current timeline) and I was surprised to find it, but there it was.
As for inside supports, those little ridges inside the brick which are only currently
distinguished for one brick (the Brick 2 x 2 without Inside Supports in case
the title or part number changes in the future):
All bricks in the set, including those with designs, had these ridges with the
exceptions listed below. I mention this because it will be useful data if we
decide to distinguish these parts in the future (I compared the parts listed
below (except the last two, for which I had no comparison parts) to recent examples
and all of the newer bricks I checked had inside supports).
The aforementioned 2 x 3 brick in yellow without cross supports.
All 2 x 6 bricks in the set.
All 2 x 8 bricks in the set.
All 2 x 10 bricks in the set.
All 4 x 12 bricks in the set.
All 8 x 16 bricks in the set.
The empty window frames had hollow studs as I indicated in the inventory. The
bricks with eyes had no white included as indicated in the inventory.
Finally, and I really don't think we'd ever distinguish this difference,
exactly half of the doors and windows were attached to the left and half to the
right. So two doors attached facing left and four windows attached facing left
and the same number of each facing right. TLG did not distinguish this difference
and I see no need for us to. The door and window directions are easily reversible.
The complete contents of the set are the storage case with no lid, 12 bags of
parts and four green large bricks loose, the cover/inventory cardboard with nothing
printed on the other side, four double-sided activity/instructions cards, and
the informational sheet of paper. All of these are included in an outer original
box with the set number printed thereupon. I have the activity cards from the
1994 version and verified that each of these was different than the 1991 version
in spite of having the same 6-digit identification number printed on each card
for both versions.
I'm certain this last bit has no relevance whatsoever to the discussion,
but I mention it for the sake of completeness: my second cousin's first name
is Frank.
|
|
|
| Author: | SylvainLS | | Posted: | Dec 5, 2018 17:27 | | Subject: | Re: Brown vs reddish brown cape | | Viewed: | 20 times | | Topic: | Colors | |
| In Colors, normann1974 writes:
| | […]
So what do you say? Are they still considered to be the same color although they
seem not to be?
|
Er, now they look aubergine (egg plant / dark purple), not (reddish) brown.
|
| Author: | Brixalotl | | Posted: | Dec 5, 2018 17:24 | | Subject: | Inventory Change Request for Set 76012-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 44301 Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type)
* Add 1 Part 44301b Light Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove
Comments from Submitter:
confirmed during part-out, thanks
|
|
| Author: | normann1974 | | Posted: | Dec 5, 2018 17:07 | | Subject: | Re: Brown vs reddish brown cape | | Viewed: | 24 times | | Topic: | Colors | |
| As previously written, my camera is not able to capture the nuance of the color
in the way I see it.
Anyway, I just realized that I have set which contains a reddish brown
cape. I just compared. There's a definite difference in color. The one from
7965 definitely has a reddish tint, which I still think the other one is missing.
I took a new picture, but the difference is still not as clear as I see it with
my eyes.
So what do you say? Are they still considered to be the same color although they
seem not to be?
/Jan
|
|
|
| Author: | StormChaser | | Posted: | Dec 5, 2018 17:01 | | Subject: | Inventory Change Request for Set 9252-2 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 12 Part 3002old Yellow Brick 2 x 3 without Cross Supports (Alternate) (match ID 1)
* Change 12 Part Yellow 3002 Brick 2 x 3 {match ID 0 to 1}
Comments from Submitter:
Another message follows.
|
|
| Author: | Turribrick | | Posted: | Dec 5, 2018 15:44 | | Subject: | Inventory Change Request for Set 31045-1 | | Viewed: | 16 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Verified from sealed set contents.
|
| Author: | Hygrotus | | Posted: | Dec 5, 2018 15:32 | | Subject: | Re: 42082 extra items | | Viewed: | 26 times | | Topic: | Inventories | |
| In Inventories, xxxzanka writes:
| | It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo
|
Thank you for finding this. Inventory of this set has been corrected.
https://www.bricklink.com/message.asp?ID=1118448
|
|
|
| Author: | Hygrotus | | Posted: | Dec 5, 2018 15:21 | | Subject: | Re: Inventory Change Request for Set 107-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, SezaR writes:
| | Marek, is it possible to leave this request open? I am busy now, but I can work
more on it.
|
You have only this one now pending in this bunch of requests
adding of this part as alternate
All other are now approved or rejected.
You didn't show any proof for it yet.
|
I was confused between the blue connector
[p=bb141c01]
and
[p=bb236bc01]
The wire with connector
comes with the connector
[p=bb236bc01]
These things should be fixed (better photos to be added, wires need to have an
inventory so that we can easily see what connector comes with what wire)
I did not know that the blue connector
[p=bb141c01]
exists (thought it exists only in light gray). Currently, it appears only with
the set 901-1 (only released in US) but it is listed ONLY by European sellers.
With what set did these European sellers find it? (I don't know, but my guess
is 107-1)
The box art of 107-1 shows the blue connector
[p=bb141c01]
but the box art and instructions of sets 182-1 and 183-1 shows the connectors
[p=bb236bc01]
The white wire with blue connector bb141c01 is not yet added to the catalog of
BL. If the inventory admins decide to keep bb141c01 with 107-1, somebody should
first add it but I don't have any copy of this blue connector.
|
Sorry for the long wait for conclude this request
Exactly part assembly plugs with wire which you want to add to the set to replace
separate entries of plugs an wire are not the same, plugs variant is diffrent
in assembly than variant of blue plugs which was in this inventory.
I will return the original blue plug and white wire which were there before this
request to regular section of this inventory and move 996bc96gray to alternate.
So as this part which left in this request is wrong for this set (wrong variant
of plugs) this will be rejected.
We can return to this inventory when correct plug and wire assembly will be added
to the catalog with photo.
|
|
| Author: | Turribrick | | Posted: | Dec 5, 2018 15:15 | | Subject: | Inventory Change Request for Set 60158-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
Verified from sealed set contents.
|
|
| Author: | Turribrick | | Posted: | Dec 5, 2018 14:59 | | Subject: | Inventory Change Request for Set 60192-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 8 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
* Change 8 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
Verified from sealed set contents.
|
|
| Author: | jagaboo | | Posted: | Dec 5, 2018 14:21 | | Subject: | Re: Part #30027u - Wheel 8mm D. x 9mm (for Slicks | | Viewed: | 20 times | | Topic: | Catalog | |
| Never mind!!! I figured it out...SORRY!!
In Catalog, jagaboo writes:
| | Notice the image of Part 30027u, showing 3 views of the part. The bottom view
of it doesn’t have any notches. All my 30027u’s look like this...no notches.
Looking at the photo of all the other similar parts, all versions are notched.
Shouldn't 30027u remain or be given a different part number?
|
|
| Author: | jagaboo | | Posted: | Dec 5, 2018 14:17 | | Subject: | Part #30027u - Wheel 8mm D. x 9mm (for Slicks | | Viewed: | 34 times | | Topic: | Catalog | | Status: | Open | |
| Notice the image of Part 30027u, showing 3 views of the part. The bottom view
of it doesn’t have any notches. All my 30027u’s look like this...no notches.
Looking at the photo of all the other similar parts, all versions are notched.
Shouldn't 30027u remain or be given a different part number?
|
|
|
| Author: | StormChaser | | Posted: | Dec 5, 2018 14:01 | | Subject: | Inventory Change Request for Set 9252-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Minifig 4224c01 Basic Figure Finger Puppet Female (bfp001) (match ID 1)
* Delete 4 Minifig 4224c02 Basic Figure Finger Puppet Male (bfp002) (match ID 1)
* Change 1 Part Black 4744px15 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Moustache Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Black 4744px9 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Simple Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 2 Part Black 4744px14 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Woman Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Red 4744px3 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Freckles and Ears Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Red 4744px15 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Moustache Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 2 Part White 4744px16 Brick, Modified 2 x 4 x 2 Double Curved Top with Baby Face Pacifier Pattern {Alternate to Regular} {match ID 1 to 0}
Comments from Submitter:
Am creating a new catalog entry for the early version of the set to avoid an unnecessarily complicated inventory.
|
|
| Author: | mjwest83 | | Posted: | Dec 5, 2018 11:54 | | Subject: | Inventory Change Request for Set 76075-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 15068pb154L Dark Bluish Gray Slope, Curved 2 x 2 No Studs with Dark Tan Belt over Pearl Dark Gray Armor Model Left Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 15068pb154R Dark Bluish Gray Slope, Curved 2 x 2 No Studs with Dark Tan Belt over Pearl Dark Gray Armor Model Right Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 3068bpb1193 Dark Bluish Gray Tile 2 x 2 with Dark Tan Belt over Pearl Dark Gray Armor Center Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 87079pb532 Dark Bluish Gray Tile 2 x 4 with Pearl Dark Gray Armor and Metallic Silver Spikes on Reddish Brown Sash Lower Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 87079pb531 Dark Bluish Gray Tile 2 x 4 with Pearl Dark Gray Armor, Dark Tan Fur, and Metallic Silver Spikes on Reddish Brown Sash Upper Pattern (Sticker) - Set 76075 (Counterpart)
Comments from Submitter:
Stickered items for Ares.
|
|
| Author: | littlepb | | Posted: | Dec 5, 2018 11:34 | | Subject: | Re: 60592c01 - whos idea was this? | | Viewed: | 41 times | | Topic: | Catalog | |
| In Catalog, mhortar writes:
| | In Catalog, brox999 writes:
| | In Catalog, SylvainLS writes:
| | In Catalog, brox999 writes:
| | […]
[3930c01] is in many new sets
|
Not.
The hinge brick and the hinge plate always came separated.
| | and I need
the ability to add this part to my store inventory in a new state […]
|
This assembly can’t be New: you have assembled the parts yourself, that’s the
definition of Used.
|
Rubbish, putting two brand new, unused parts together does not make them used.
I list the assembly as new if the parts came from a sealed set
|
You assembled the parts. That's literally the definition of what makes them
used (previously assembled). You can't build a set and then sell it as 'new,
only assembled once'. There was a big argument a few years ago about whether
stacking bricks/plates at the Pick-A-Brick wall made them 'used' instead
of 'new' (my opinion is yes). There's also the argument that minifigs
can't be sold as 'new' if they are assembled (I'm on the fence
about this one).
Josh
Josh
|
I personally think that assembled hinges can be marked as new because they have
not been taken apart and if a buyer wants separated parts, they can order them
separately. Maybe there should be an option for marking the condition of inventories
as "new but assembled".
|
|
| Author: | littlepb | | Posted: | Dec 5, 2018 11:12 | | Subject: | Re: Large Macaroni tile in classic blue? | | Viewed: | 33 times | | Topic: | Catalog | |
| In Catalog, Hygrotus writes:
| | In General, celloguy writes:
Isn't this part on real photo there just dark azure, but it's look like
this due to lighting condition of photo?
|
I think that that's what it is
|
|
| Author: | yorbrick | | Posted: | Dec 5, 2018 09:19 | | Subject: | Re: 60592c01 - whos idea was this? | | Viewed: | 45 times | | Topic: | Catalog | |
| | | It has been sometime I am thinking about this one:
Does opening the screws (located on the top) and removing the motor housing in
order to check the production date make this old motors used? (these motors were
not sealed in any way, so opening the motor is very easy: one only need to open
the screws)
|
I'd say used, as there is the possibility of damage when opening it. Of course,
you could test it by applynig power to it, but that makes it used. There will
also be minor wear on the screws, just like clicking two bricks together and
unclicking them causes wear and makes them used.
|
|
| Author: | yorbrick | | Posted: | Dec 5, 2018 09:17 | | Subject: | Re: 60592c01 - whos idea was this? | | Viewed: | 39 times | | Topic: | Catalog | |
| | | You assembled the parts. That's literally the definition of what makes them
used (previously assembled). You can't build a set and then sell it as 'new,
only assembled once'. There was a big argument a few years ago about whether
stacking bricks/plates at the Pick-A-Brick wall made them 'used' instead
of 'new' (my opinion is yes). There's also the argument that minifigs
can't be sold as 'new' if they are assembled (I'm on the fence
about this one).
|
Just to correct that, the argument about minifigures is can a seller assemble
them and still call them new. There is no argument about can a minifigure be
new if it is assembled - the answer is clearly yes, as in some cases LEGO sells
assembled minifigures and by definition those assembled minifigures can be new
as that is how they were sold.
|
|
| Author: | SylvainLS | | Posted: | Dec 5, 2018 07:26 | | Subject: | Re: 60592c01 - whos idea was this? | | Viewed: | 76 times | | Topic: | Catalog | |
| In Catalog, SezaR writes:
| | […]
It has been sometime I am thinking about this one:
Does opening the screws (located on the top) and removing the motor housing in
order to check the production date make this old motors used? (these motors were
not sealed in any way, so opening the motor is very easy: one only need to open
the screws)
|
Well, the definition says New should have been manipulated for sorting only.
Opening isn’t sorting… unless you sort by production date 
Now, it’s about screws, not clicking plastic parts, so it’s less “Used” than,
say, removing arms from a torso, but some may see it as “Used” nonetheless.
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
)
)
