Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | StormChaser | Posted: | Dec 5, 2018 17:01 | Subject: | Inventory Change Request for Set 9252-2 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 12 Part 3002old Yellow Brick 2 x 3 without Cross Supports (Alternate) (match ID 1)
* Change 12 Part Yellow 3002 Brick 2 x 3 {match ID 0 to 1}
Comments from Submitter:
Another message follows.
|
|
Author: | Turribrick | Posted: | Dec 5, 2018 15:44 | Subject: | Inventory Change Request for Set 31045-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
Verified from sealed set contents.
|
Author: | Hygrotus | Posted: | Dec 5, 2018 15:32 | Subject: | Re: 42082 extra items | Viewed: | 26 times | Topic: | Inventories | |
| In Inventories, xxxzanka writes:
| It seems to me one trans clear 1x1 plate is missing as extra parts (I have 3
in step 8 bags, 2 used in step 8).
Giancarlo
|
Thank you for finding this. Inventory of this set has been corrected.
https://www.bricklink.com/message.asp?ID=1118448
|
|
|
Author: | Hygrotus | Posted: | Dec 5, 2018 15:21 | Subject: | Re: Inventory Change Request for Set 107-1 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| In Inventories Requests, Hygrotus writes:
| In Inventories Requests, SezaR writes:
| Marek, is it possible to leave this request open? I am busy now, but I can work
more on it.
|
You have only this one now pending in this bunch of requests
adding of this part as alternate
All other are now approved or rejected.
You didn't show any proof for it yet.
|
I was confused between the blue connector
[p=bb141c01]
and
[p=bb236bc01]
The wire with connector
comes with the connector
[p=bb236bc01]
These things should be fixed (better photos to be added, wires need to have an
inventory so that we can easily see what connector comes with what wire)
I did not know that the blue connector
[p=bb141c01]
exists (thought it exists only in light gray). Currently, it appears only with
the set 901-1 (only released in US) but it is listed ONLY by European sellers.
With what set did these European sellers find it? (I don't know, but my guess
is 107-1)
The box art of 107-1 shows the blue connector
[p=bb141c01]
but the box art and instructions of sets 182-1 and 183-1 shows the connectors
[p=bb236bc01]
The white wire with blue connector bb141c01 is not yet added to the catalog of
BL. If the inventory admins decide to keep bb141c01 with 107-1, somebody should
first add it but I don't have any copy of this blue connector.
|
Sorry for the long wait for conclude this request
Exactly part assembly plugs with wire which you want to add to the set to replace
separate entries of plugs an wire are not the same, plugs variant is diffrent
in assembly than variant of blue plugs which was in this inventory.
I will return the original blue plug and white wire which were there before this
request to regular section of this inventory and move 996bc96gray to alternate.
So as this part which left in this request is wrong for this set (wrong variant
of plugs) this will be rejected.
We can return to this inventory when correct plug and wire assembly will be added
to the catalog with photo.
|
|
Author: | Turribrick | Posted: | Dec 5, 2018 15:15 | Subject: | Inventory Change Request for Set 60158-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
Verified from sealed set contents.
|
|
Author: | Turribrick | Posted: | Dec 5, 2018 14:59 | Subject: | Inventory Change Request for Set 60192-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 8 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (Undetermined Type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
* Change 8 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
Verified from sealed set contents.
|
|
Author: | jagaboo | Posted: | Dec 5, 2018 14:21 | Subject: | Re: Part #30027u - Wheel 8mm D. x 9mm (for Slicks | Viewed: | 20 times | Topic: | Catalog | |
| Never mind!!! I figured it out...SORRY!!
In Catalog, jagaboo writes:
| Notice the image of Part 30027u, showing 3 views of the part. The bottom view
of it doesn’t have any notches. All my 30027u’s look like this...no notches.
Looking at the photo of all the other similar parts, all versions are notched.
Shouldn't 30027u remain or be given a different part number?
|
|
Author: | jagaboo | Posted: | Dec 5, 2018 14:17 | Subject: | Part #30027u - Wheel 8mm D. x 9mm (for Slicks | Viewed: | 34 times | Topic: | Catalog | Status: | Open | |
| Notice the image of Part 30027u, showing 3 views of the part. The bottom view
of it doesn’t have any notches. All my 30027u’s look like this...no notches.
Looking at the photo of all the other similar parts, all versions are notched.
Shouldn't 30027u remain or be given a different part number?
|
|
|
Author: | StormChaser | Posted: | Dec 5, 2018 14:01 | Subject: | Inventory Change Request for Set 9252-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Minifig 4224c01 Basic Figure Finger Puppet Female (bfp001) (match ID 1)
* Delete 4 Minifig 4224c02 Basic Figure Finger Puppet Male (bfp002) (match ID 1)
* Change 1 Part Black 4744px15 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Moustache Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Black 4744px9 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Simple Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 2 Part Black 4744px14 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Woman Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Red 4744px3 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Freckles and Ears Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 1 Part Red 4744px15 Brick, Modified 2 x 4 x 2 Double Curved Top with Yellow Face, Moustache Pattern {Alternate to Regular} {match ID 1 to 0}
* Change 2 Part White 4744px16 Brick, Modified 2 x 4 x 2 Double Curved Top with Baby Face Pacifier Pattern {Alternate to Regular} {match ID 1 to 0}
Comments from Submitter:
Am creating a new catalog entry for the early version of the set to avoid an unnecessarily complicated inventory.
|
|
Author: | mjwest83 | Posted: | Dec 5, 2018 11:54 | Subject: | Inventory Change Request for Set 76075-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 15068pb154L Dark Bluish Gray Slope, Curved 2 x 2 No Studs with Dark Tan Belt over Pearl Dark Gray Armor Model Left Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 15068pb154R Dark Bluish Gray Slope, Curved 2 x 2 No Studs with Dark Tan Belt over Pearl Dark Gray Armor Model Right Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 3068bpb1193 Dark Bluish Gray Tile 2 x 2 with Dark Tan Belt over Pearl Dark Gray Armor Center Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 87079pb532 Dark Bluish Gray Tile 2 x 4 with Pearl Dark Gray Armor and Metallic Silver Spikes on Reddish Brown Sash Lower Pattern (Sticker) - Set 76075 (Counterpart)
* Add 1 Part 87079pb531 Dark Bluish Gray Tile 2 x 4 with Pearl Dark Gray Armor, Dark Tan Fur, and Metallic Silver Spikes on Reddish Brown Sash Upper Pattern (Sticker) - Set 76075 (Counterpart)
Comments from Submitter:
Stickered items for Ares.
|
|
Author: | littlepb | Posted: | Dec 5, 2018 11:34 | Subject: | Re: 60592c01 - whos idea was this? | Viewed: | 41 times | Topic: | Catalog | |
| In Catalog, mhortar writes:
| In Catalog, brox999 writes:
| In Catalog, SylvainLS writes:
| In Catalog, brox999 writes:
| […]
[3930c01] is in many new sets
|
Not.
The hinge brick and the hinge plate always came separated.
| and I need
the ability to add this part to my store inventory in a new state […]
|
This assembly can’t be New: you have assembled the parts yourself, that’s the
definition of Used.
|
Rubbish, putting two brand new, unused parts together does not make them used.
I list the assembly as new if the parts came from a sealed set
|
You assembled the parts. That's literally the definition of what makes them
used (previously assembled). You can't build a set and then sell it as 'new,
only assembled once'. There was a big argument a few years ago about whether
stacking bricks/plates at the Pick-A-Brick wall made them 'used' instead
of 'new' (my opinion is yes). There's also the argument that minifigs
can't be sold as 'new' if they are assembled (I'm on the fence
about this one).
Josh
Josh
|
I personally think that assembled hinges can be marked as new because they have
not been taken apart and if a buyer wants separated parts, they can order them
separately. Maybe there should be an option for marking the condition of inventories
as "new but assembled".
|
|
Author: | littlepb | Posted: | Dec 5, 2018 11:12 | Subject: | Re: Large Macaroni tile in classic blue? | Viewed: | 33 times | Topic: | Catalog | |
| In Catalog, Hygrotus writes:
| In General, celloguy writes:
Isn't this part on real photo there just dark azure, but it's look like
this due to lighting condition of photo?
|
I think that that's what it is
|
|
Author: | yorbrick | Posted: | Dec 5, 2018 09:19 | Subject: | Re: 60592c01 - whos idea was this? | Viewed: | 45 times | Topic: | Catalog | |
| | It has been sometime I am thinking about this one:
Does opening the screws (located on the top) and removing the motor housing in
order to check the production date make this old motors used? (these motors were
not sealed in any way, so opening the motor is very easy: one only need to open
the screws)
|
I'd say used, as there is the possibility of damage when opening it. Of course,
you could test it by applynig power to it, but that makes it used. There will
also be minor wear on the screws, just like clicking two bricks together and
unclicking them causes wear and makes them used.
|
|
Author: | yorbrick | Posted: | Dec 5, 2018 09:17 | Subject: | Re: 60592c01 - whos idea was this? | Viewed: | 39 times | Topic: | Catalog | |
| | You assembled the parts. That's literally the definition of what makes them
used (previously assembled). You can't build a set and then sell it as 'new,
only assembled once'. There was a big argument a few years ago about whether
stacking bricks/plates at the Pick-A-Brick wall made them 'used' instead
of 'new' (my opinion is yes). There's also the argument that minifigs
can't be sold as 'new' if they are assembled (I'm on the fence
about this one).
|
Just to correct that, the argument about minifigures is can a seller assemble
them and still call them new. There is no argument about can a minifigure be
new if it is assembled - the answer is clearly yes, as in some cases LEGO sells
assembled minifigures and by definition those assembled minifigures can be new
as that is how they were sold.
|
|
Author: | SylvainLS | Posted: | Dec 5, 2018 07:26 | Subject: | Re: 60592c01 - whos idea was this? | Viewed: | 76 times | Topic: | Catalog | |
| In Catalog, SezaR writes:
| […]
It has been sometime I am thinking about this one:
Does opening the screws (located on the top) and removing the motor housing in
order to check the production date make this old motors used? (these motors were
not sealed in any way, so opening the motor is very easy: one only need to open
the screws)
|
Well, the definition says New should have been manipulated for sorting only.
Opening isn’t sorting… unless you sort by production date
Now, it’s about screws, not clicking plastic parts, so it’s less “Used” than,
say, removing arms from a torso, but some may see it as “Used” nonetheless.
|
|
Author: | Teup | Posted: | Dec 5, 2018 07:22 | Subject: | Re: Automatic price while listing items | Viewed: | 33 times | Topic: | Suggestions | |
| In Suggestions, EpicBigG writes:
| I hope bricklink sees this!
|
They do, but they won't do anything.
|
Author: | TakeAbricK | Posted: | Dec 5, 2018 06:05 | Subject: | Inventory Change Request for Set 809-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Red {73436 Door 1 x 4 x 5 Left - (MARKED FOR DELETION - Undetermined Glass Color Version) to 73436c01 Door 1 x 4 x 5 Left with Trans-Clear Glass}
* Change 1 Part Red {73435 Door 1 x 4 x 5 Right - (MARKED FOR DELETION - Undetermined Glass Color Version) to 73435c01 Door 1 x 4 x 5 Right with Trans-Clear Glass}
Comments from Submitter:
Source: Sealed Set
|
|
Author: | SezaR | Posted: | Dec 5, 2018 05:20 | Subject: | Re: Inventory Change Request for Set 7735-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| OK, got it.
By the way, thanks very much for helping me with these inventory changes. If
you can find any evidence for any other sets in the 1980-1992 range that included
1x1 round plates, it would be greatly appreciated.
Cheers,
Randy
|
You are welcome.
It seems I ran out of photo for now! (but I will double-check)
Cheers
Reza
|
In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 6 Part 4073 Trans-Clear Plate, Round 1 x 1 Straight Side
* Delete 6 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side
* Add 3 Part 4073c01 Trans-Red Plate, Round 1 x 1, 2 on Sprue
* Add 3 Part 4073c01 Trans-Clear Plate, Round 1 x 1, 2 on Sprue
|
|
Reza -
Assuming that you know where the images are located on the web, could you please
add hyperlinks to where you find the images in your requests?
The hyperlinks may not always be valid, but at least I can look them over for
now.
Thanks,
Randy
|
Randy,
I have saved many photos of used, MISB, or sealed copies for various train sets
from 80s and even before 80s. I got them either from their owners or from past
auctions. So I cannot always find any link as those links are mostly broken by
now. My friend Morris (lego.12vtrains) has saved many photos since 2014-15 and
shared them with me.
For this set, I have photos of many copies. I have also bought an MISB one and
it is currently in the custom office.
One photo is taken from the store Bluxe. You can find easily his photos on facebook.
Search Bluxe. (can I add a link to facebook here?)
Nkiss82 sent me photos of his MISB copy. I used them already for this request:
https://www.bricklink.com/messageThread.asp?ID=244678
Thanks,
Reza
|
|
|
|
Author: | SezaR | Posted: | Dec 5, 2018 05:11 | Subject: | Re: Inventory Change Request for Set 6982-1 | Viewed: | 11 times | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| In Inventories Requests, SezaR writes:
| * Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder
|
You wanted to delete tire to this wheel assembly rather than plate, yes?
|
Based on this mistake, if you revoke all my honored points, it is fair and I
don't complain
|
Author: | SezaR | Posted: | Dec 5, 2018 05:09 | Subject: | Re: Inventory Change Request for Set 6982-1 | Viewed: | 13 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 4 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}
|
|
|
|
Author: | SezaR | Posted: | Dec 5, 2018 05:09 | Subject: | Inventory Change Request for Set 6982-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 4084 Black Tire 21mm D. x 9mm Offset Tread Medium
* Delete 4 Part 4624 White Wheel 8mm D. x 6mm
* Change 4 Part White 4624c03 Wheel 8mm D. x 6mm with Black Tire 21mm D. x 9mm Offset Tread Medium (4624 / 4084) {Counterpart to Regular}
|
Author: | SezaR | Posted: | Dec 5, 2018 05:08 | Subject: | Re: Inventory Change Request for Set 6982-1 | Viewed: | 10 times | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| In Inventories Requests, SezaR writes:
| * Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder
|
You wanted to delete tire to this wheel assembly rather than plate, yes?
|
hmmmm, that seems to be a historic mistake!
|
Author: | Hygrotus | Posted: | Dec 5, 2018 04:50 | Subject: | Re: Large Macaroni tile in classic blue? | Viewed: | 40 times | Topic: | Catalog | |
| In General, celloguy writes:
Isn't this part on real photo there just dark azure, but it's look like
this due to lighting condition of photo?
|
|
Author: | Hygrotus | Posted: | Dec 5, 2018 04:47 | Subject: | Re: Inventory Change Request for Set 6982-1 | Viewed: | 12 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| * Delete 2 Part 4600 Light Gray Plate, Modified 2 x 2 with Wheels Holder
|
You wanted to delete tire to this wheel assembly rather than plate, yes?
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|