Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | elias3 | Posted: | Oct 30, 2018 14:50 | Subject: | Inventory Change Request for Set 60151-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
own collection and part out sets
|
|
Author: | elias3 | Posted: | Oct 25, 2018 07:22 | Subject: | Re: Inventory Change Request for Set 7902-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, primadeluxe writes:
| In the set I have bought there was a paper statement from lego the normal bricks
1x4 had to be remplaced by the Technic ones with holes. I would have send you
a picture of this statement, but I only now see how to do that!
|
Wow, that's a new one for me. The red and white bricks are directly in front
of and behind the driver, so they're fairly visible. Why TLG would think
it was necessary to replace perfectly good standard bricks with Technic bricks
in these locations is definitely a mystery.
In light of this new evidence, feel free to resubmit the requests and we will
reconsider them.
|
Robert
that extra paper is viewable on Peeron
http://www.peeron.com/scans/7902-1/
http://www.peeron.com/scans/7902-1/21
strange...
Stefaan
|
|
Author: | elias3 | Posted: | Oct 21, 2018 06:33 | Subject: | Re: Inventory Change Request for Set 5540-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, Admin_Russell writes:
Yep, that's what I used. Anyone can use it, though I imagine it's not
a well-known feature. Clearly I don't use it that often myself.
It would be nice to have more features like this. I can think of a number of
ways in which they would be handy.
|
Hi
Did follow that link (think I used it in the past) and checked the inv. from
set 7898 and found the 'or' section in the alternate section, never seen
this before:
https://www.bricklink.com/catalogItemInv.asp?S=7898-1
Stefaan
|
|
Author: | elias3 | Posted: | Oct 18, 2018 14:01 | Subject: | Inventory Change Request for Set 60201-16 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Dark Blue Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
parted out a few sets, all have this extra one
|
Author: | elias3 | Posted: | Oct 16, 2018 01:42 | Subject: | Re: Inventory Change Request for Set 894-1 | Viewed: | 13 times | Topic: | Inventories Requests | |
| In Inventories Requests, sumotodave2018 writes:
| Please make changes to the following inventory:
* Add 1 Part 3001 Light Gray Brick 2 x 4
Comments from Submitter:
2x4 brick is missing from inventory
|
Hi
No, already in but it's the 3001old.
Stefaan
|
|
Author: | elias3 | Posted: | Oct 13, 2018 12:35 | Subject: | Re: Adding correction instruction sheet to a set | Viewed: | 31 times | Topic: | Catalog | |
| In Help, CraftHouseBrick writes:
| Hi all, I’ve got an additional instruction sheet that appears to supersede the
printed instructions in the sets booklet. It’s just a single page, printed on
one side. I’ve attached a photo...
Is there a way to add this to the catalog?
Thanks in advance
|
Hi
yes, that's possible, just add it to the catalog.
Start here: https://www.bricklink.com/v2/catalog/catalogImageAdd.page?itemType=I
Only: did it came in the first version from 2005?
Or only in the 2008 version?
Or in both versions?
What's the date on your sheet? And what is the code printed?
It looks like there were more sets with extra sheets at that time
check here set 7248 with the extra info on the instructionspage:
https://www.bricklink.com/v2/catalog/catalogitem.page?I=7248-1#T=S&O={"rpp":"500","iconly":0}
Stefaan
|
|
Author: | elias3 | Posted: | Oct 7, 2018 08:05 | Subject: | Inventory Change Request for Set 9484-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 4865b Red Panel 1 x 2 x 1 with Rounded Corners (Alternate) (match ID 2)
* Change 2 Part Red 4865 Panel 1 x 2 x 1 {match ID 0 to 2}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
|
|
Author: | elias3 | Posted: | Oct 6, 2018 11:15 | Subject: | Inventory Change Request for Set 8426-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {30152c01 Minifig, Utensil Magnifying Glass with Trans-Clear Lens - Undetermined Frame Thickness and Handle to 90463c01 Minifig, Utensil Magnifying Glass with Removable Lens with Trans-Clear Lens}
* Change 1 Part Light Bluish Gray {3684 Slope 75 2 x 2 x 3 - Undetermined Stud Type to 3684a Slope 75 2 x 2 x 3 - Hollow Studs}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
|
|
Author: | elias3 | Posted: | Oct 6, 2018 11:02 | Subject: | Inventory Change Request for Set 7937-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
|
|
Author: | elias3 | Posted: | Oct 6, 2018 10:58 | Subject: | Inventory Change Request for Set 9483-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 4 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
|
|
Author: | elias3 | Posted: | Oct 6, 2018 10:48 | Subject: | Inventory Change Request for Set 30120-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Medium Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
|
|
Author: | elias3 | Posted: | Oct 6, 2018 08:43 | Subject: | Inventory Change Request for Set 9485-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 4 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 4 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
|
|
Author: | elias3 | Posted: | Oct 3, 2018 13:55 | Subject: | Re: Inventory Change Request for Set 8639-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| In Inventories Requests, elias3 writes:
| * Change 2 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
|
After change of this tire, this counterpart
* | | 42610c03 (Inv) Wheel 11mm D. x 8mm with Center Groove with Black Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread (42610 / 92409) Parts: Wheel & Tire Assembly | I added to this set
because now it could be determine
|
Thanks Marek
|
|
Author: | elias3 | Posted: | Oct 3, 2018 12:26 | Subject: | Inventory Change Request for Set 8639-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 98313 Black Arm Mechanical, Exo-Force / Bionicle, Thick Support (Alternate) (match ID 12)
* Change 1 Part Black 53989 Arm Mechanical, Exo-Force / Bionicle {match ID 0 to 12}
* Change 4 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 9 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 3 Part Tan {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 4 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
* Change 2 Part Tan {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud / Hollow Stud}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
For the 'add 98313' see this post (and follow posts): https://www.bricklink.com/message.asp?ID=1108122
Thanks ~SD
|
|
Author: | elias3 | Posted: | Oct 1, 2018 12:26 | Subject: | Inventory Change Request for Set 8206-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Medium Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
|
|
Author: | elias3 | Posted: | Sep 30, 2018 14:17 | Subject: | Inventory Change Request for Set 8487-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Light Aqua {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Tan {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud / Hollow Stud}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
|
|
Author: | elias3 | Posted: | Sep 29, 2018 03:40 | Subject: | Inventory Change Request for Set 8200-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 60470b Black Plate, Modified 1 x 2 with Clips Horizontal (thick open O clips) (Alternate) (match ID 1)
* Change 1 Part Black 60470 Plate, Modified 1 x 2 with Clips Horizontal (thick open U clips) {match ID 0 to 1}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
60470b found in more Cars sets, this part was added later to the catalog when inv. was made.
|
|
Author: | elias3 | Posted: | Sep 27, 2018 07:21 | Subject: | Inventory Change Request for Set 8679-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 98313 Black Arm Mechanical, Exo-Force / Bionicle, Thick Support (Alternate) (match ID 11)
* Change 1 Part Black 53989 Arm Mechanical, Exo-Force / Bionicle {match ID 0 to 11}
Comments from Submitter:
see: https://www.bricklink.com/message.asp?ID=1108117
|
|
Author: | elias3 | Posted: | Sep 27, 2018 05:23 | Subject: | Re: Inventory Change Request for Set 8679-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| In Inventories Requests, elias3 writes:
| Please make changes to the following inventory:
* Change 1 Part Black {53989 Arm Mechanical, Exo-Force / Bionicle to 98313 Arm Mechanical, Exo-Force / Bionicle, Thick Support}
|
In my opinion
should be added to this set as alternate only to
Older one with "thin support" is still in many sets from 2011 and even 2012 and
then stops showing. I even have 53989 from 2012 set
8679 is from 2011. So it is very probably that in this sets can both variants
be found.
|
Hi
For me it's ok with both types in the inventory.
Do I create a new change or will you do it?
Stefaan
|
|
Author: | elias3 | Posted: | Sep 26, 2018 15:32 | Subject: | Inventory Change Request for Set 8679-1 | Viewed: | 40 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 4 Part 2453b Dark Bluish Gray Brick 1 x 1 x 5 - Solid Stud (Alternate) (match ID 9)
* Delete 3 Part 4599b Light Bluish Gray Tap 1 x 1 without Hole in Nozzle End (Alternate) (match ID 8)
* Change 1 Part Black {53989 Arm Mechanical, Exo-Force / Bionicle to 98313 Arm Mechanical, Exo-Force / Bionicle, Thick Support}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 4 Part Dark Bluish Gray {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453b Brick 1 x 1 x 5 - Solid Stud} {match ID 9 to 0}
* Change 3 Part Light Bluish Gray {4599 Tap 1 x 1 - Undetermined Nozzle End to 4599b Tap 1 x 1 without Hole in Nozzle End} {match ID 8 to 0}
* Change 4 Part White {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 4 Part Red 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper) {match ID 11 to 8}
* Change 4 Part Red 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) {match ID 11 to 8}
* Change 4 Part Black 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper) {match ID 12 to 9}
* Change 4 Part Black 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) {match ID 12 to 9}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
* For the 53989 to 98313, found 98313 in 2 other Cars sets: 8639 and 9486.
* For the 2453 to 2453b change, the only 2453b I have here @ home (or still MISB sets). That's why I prefer to delete the alternate part.
* For the tap change, no 4599a found in 2011 sets or later, prefer to delete the alternate part.
* Because the MID's 8 and 9 are deleted, just change the 11 and 12 MID's to 8 and 9.
Thank you! ~SD
|
|
Author: | elias3 | Posted: | Sep 25, 2018 12:05 | Subject: | Inventory Change Request for Set 9481-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 1 to 1}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
|
|
Author: | elias3 | Posted: | Sep 23, 2018 12:10 | Subject: | Inventory Change Request for Set 8486-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 6 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 6 to 6}
* Change 1 Part Red {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud / Hollow Stud}
* Change 3 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
|
|
Author: | elias3 | Posted: | Sep 23, 2018 07:02 | Subject: | Re: Alternate Version of set 6386 | Viewed: | 38 times | Topic: | Inventories | |
| In Inventories, StormChaser writes:
| In Inventories, David892 writes:
| So I spent another hour trying to figure this out and I finally found out
that my instructions were different!. For the same set, my instructions were
telling me to use different pieces.
|
What is the part number printed on your copy of the set instructions? You will
find this on the front page at the lower right-hand corner of the complete set
image. Please post a photo or scan of this portion of the instructions showing
the number.
| My question to ou guys is how can we document this? And is this something that
you guys see all the time with older LEGO sets?
|
It has been documented. The set inventory has been updated with the changes
you found and an inventory note was added. And yes, it's not too terribly
uncommon. There are over 100 known sets from as recently as last year which
have been redesigned for various reasons while the set was still in production.
I have asked for BrickLink to give us the ability to find these sets in the catalog.
So far, though, nothing has happened with my request.
|
Hi Robert
strange, the '99' only viewable on this page:
https://www.bricklink.com/catalogItemInv.asp?S=6386-1
on this page I get the '1':
https://www.bricklink.com/v2/catalog/catalogitem.page?S=6386-1#T=I
the other MID are also different
a glitch?
Stefaan
|
|
Author: | elias3 | Posted: | Sep 23, 2018 06:53 | Subject: | Re: Alternate Version of set 6386 | Viewed: | 32 times | Topic: | Inventories | |
| In Inventories, David892 writes:
| Good evening and thanks for the fast reply!
The number at the bottom right corner is 120499. See attached picture.
Great job on documenting the variation!
|
Hi
Good found!
unfortunately, both versions have the same instructions code
Version on Peeron with the same code '120499':
http://peeron.com/scans/6386-1/1
http://peeron.com/scans/6386-1/3
Stefaan
|
|
Author: | elias3 | Posted: | Sep 22, 2018 09:34 | Subject: | Inventory Change Request for Set 8423-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 3 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
checking Cars sets, own collection, never mixed with other sets.
|
|
Author: | elias3 | Posted: | Sep 16, 2018 05:05 | Subject: | Inventory Change Request for Part 33267c01 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 6808 (Variable Color) Scala Support Connector with Pin
* Add 2 Part 33232a (Variable Color) Scala Support Connector Brick Short, Pin Top
Comments from Submitter:
wrong part in this inventory, the 6808 doens't fit in the 33267b
|
Author: | elias3 | Posted: | Aug 27, 2018 17:20 | Subject: | Re: Inventory Change Request for Set 40170-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| In Inventories Requests, elias3 writes:
| Please make changes to the following inventory:
* Add 1 Part 4162pb190 White Tile 1 x 8 with Black and Yellow Danger Stripes Pattern (Sticker) - Set 40170
|
you forget that this is a counterpart but I corrected it
|
Thanks Marek 👍
|
Author: | elias3 | Posted: | Aug 27, 2018 14:40 | Subject: | Inventory Change Request for Set 40170-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4162pb190 White Tile 1 x 8 with Black and Yellow Danger Stripes Pattern (Sticker) - Set 40170
|
Author: | elias3 | Posted: | Aug 27, 2018 10:04 | Subject: | Inventory Change Request for Set 60139-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
source = part-out sets
|
Author: | elias3 | Posted: | Aug 27, 2018 10:01 | Subject: | Inventory Change Request for Set 60182-1 | Viewed: | 8 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
source = part-out sets
|
|
Author: | elias3 | Posted: | Aug 27, 2018 09:54 | Subject: | Inventory Change Request for Set 60183-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
Comments from Submitter:
source = part-out sets
|
|
Author: | elias3 | Posted: | Aug 27, 2018 09:53 | Subject: | Inventory Change Request for Set 60181-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
source = part-out sets
|
Author: | elias3 | Posted: | Aug 27, 2018 09:50 | Subject: | Inventory Change Request for Set 60172-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
Comments from Submitter:
source = part-out sets
|
|
Author: | elias3 | Posted: | Aug 27, 2018 09:47 | Subject: | Inventory Change Request for Set 60134-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Dark Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
Comments from Submitter:
source = part-out sets, sorry no longer info about the '44301 undetermined' is taken from this location when this part was sold.
|
|
Author: | elias3 | Posted: | Aug 27, 2018 09:42 | Subject: | Inventory Change Request for Set 75130-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 3 Part 44302b Dark Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate) (match ID 1)
* Change 3 Part Dark Bluish Gray 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove {match ID 0 to 1}
Comments from Submitter:
source = part-out sets, found all -b type
|
|
Author: | elias3 | Posted: | Aug 27, 2018 09:36 | Subject: | Inventory Change Request for Set 75103-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
source = part-out sets
|
|
Author: | elias3 | Posted: | Aug 27, 2018 09:00 | Subject: | Inventory Change Request for Set 60056-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
own collection and part out sets
|
|
Author: | elias3 | Posted: | Aug 27, 2018 08:53 | Subject: | Inventory Change Request for Set 60152-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Blue {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove}
Comments from Submitter:
source = part-out sets
|
|
Author: | elias3 | Posted: | Aug 27, 2018 08:43 | Subject: | Inventory Change Request for Set 60185-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
* Change 2 Part Yellow {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
Comments from Submitter:
source = part-out sets
|
|
Author: | elias3 | Posted: | Aug 27, 2018 08:31 | Subject: | Inventory Change Request for Set 60079-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 2 Part Black {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
* Change 4 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
source = part-out sets, the black is without, LBG is with groove
|
|
Author: | elias3 | Posted: | Aug 27, 2018 08:18 | Subject: | Inventory Change Request for Set 75146-16 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 44302a White Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove (Alternate) (match ID 1)
* Change 1 Part White 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove {match ID 0 to 1}
Comments from Submitter:
only 2x white 44302 in my shop from last part-out this set, both types found by check about the last part changes. -a is with closed pip underneath, -b is with open pip underneath
|
|
Author: | elias3 | Posted: | Aug 27, 2018 08:11 | Subject: | Inventory Change Request for Set 60137-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Yellow {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302b Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove}
Comments from Submitter:
source: part-out sets
|
|
Author: | elias3 | Posted: | Aug 27, 2018 08:07 | Subject: | Inventory Change Request for Set 40170-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30261pb037 White Road Sign Clip-on 2 x 2 Round with Black Number 30 in Red Circle Pattern (Sticker) - Set 40170 (Counterpart)
* Add 1 Part 15210pb040 White Road Sign Clip-on 2 x 2 Square Open O Clip with White Bus on Blue Background Pattern (Sticker) - Set 40170 (Counterpart)
* Add 1 Part 93273pb088 White Slope, Curved 4 x 1 Double No Studs with White 'P' in Blue Square Pattern (Sticker) - Set 40170 (Counterpart)
* Add 1 Part 3068bpb1166 White Tile 2 x 2 with Map City Street View Pattern (Sticker) - Set 40170 (Counterpart)
* Add 1 Part 892pb029 Light Bluish Gray Road Sign Clip-on 2 x 2 Triangle with Minifig Worker Shoveling and 1 Pile Pattern (Sticker) - Set 60152 (Counterpart)
* Change 1 Part Light Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove}
* Change 1 Part Light Bluish Gray {44302 Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type) to 44302a Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove}
Comments from Submitter:
source part-out sets and own collection (at this time 1 stickered part is not yet approved by the CA's)
|
|
|
Author: | elias3 | Posted: | Aug 22, 2018 02:17 | Subject: | Re: Inventory Change Request for Set 1558-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| In Inventories Requests, elias3 writes:
| just a question: was it not better to keep the minifigs and just make an inv.
change?
|
Then all sellers would left with incomplete minifigs in such inventory changed
minifig listnings. This was also very old set, wrong minifig was long in the
catalog and also more extensive change this was than only change part variant
being already in minifig for example.
|
yes ofcourse, forgot
marked for del. members notified about this del. and need to check and relist
the part/minfig etc...
thanks!
Stefaan
|
|
Author: | elias3 | Posted: | Aug 21, 2018 12:58 | Subject: | Re: Inventory Change Request for Set 1558-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| Please make changes to the following inventory:
* Delete 1 Minifig sp059 Classic Space - Black with Light Gray Jet Pack with Stud On Front
* Delete 1 Minifig sp053 Classic Space - Yellow with Light Gray Jet Pack with Stud On Front
* Add 1 Minifig sp053b Classic Space - Yellow with Light Gray Jet Pack and Trans Red Cones (Complete Assembly)
* Add 1 Minifig sp059a Classic Space - Black with Light Gray Jet Pack (Complete Assembly)
* Delete 4 Part 4592c02 Light Gray Lever Small Base with Black Lever
* Delete 2 Part 4589 Trans-Red Cone 1 x 1 without Top Groove
* Delete 2 Part 4589 Trans-Yellow Cone 1 x 1 without Top Groove
Comments from Submitter:
Source instruction
|
Thanks!
just a question: was it not better to keep the minifigs and just make an inv.
change?
Why? Well both minifigs are no longer in any other set. Now we have -a and -b
versions but the 'without -a -b' version is no longer available (already
marked for del.).
That was also my reply on the other inv. ch. req.
We have
sp050
sp051
sp052
sp053 - marked for del.
sp053a
sp053b
sp054 - marked for del.
sp054b - why not -a (but same question here why not just keep the sp054)
sp055
sp056
sp057
sp058
sp059 - marked for del.
sp059a
Stefaan
|
|
Author: | elias3 | Posted: | Aug 20, 2018 07:29 | Subject: | Re: Inventory Change Request for Minifig sp059 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| In Inventories Requests, Hygrotus writes:
| In Inventories Requests, Brick.Door writes:
| Please make changes to the following inventory:
* Delete 2 Part 4589 Trans-Yellow Cone 1 x 1 without Top Groove
Comments from Submitter:
These cones are already included in the set inventory and should not be duplicated on the minifig. There are only 2 trans-yellow cones included in the box.
|
Shouldn't be this whole set inventory of corrected in simillar
way as this one
with complete with backpack
in the inventory?
As it is now neither inventory of set or minifg is correct. Yes you have right
cones are now both in minifig and set.
So the best way in my opinion would be submit whole minifigs with backpack for
this set and delete parts for backpacks from set inventory.
|
BTW I can correct it, if it need it. I have yellow one, just modify sp053a and
black one I can construct I think
|
Hi
Both red cones need to be deleted in the inventory and add to the minifig
[m=sp053] because this one doesn't have them in the inv. like the black one.
The cones are good visible on the instructions. (the yellow ones on the black
minifig, the red ones on the yellow minifig)
Then we have an inv. like minifigs as and with a lot of
extra parts.
(sp053 is only in this set)
Stefaan
|
|
Author: | elias3 | Posted: | Aug 15, 2018 08:37 | Subject: | Inventory Change Request for Set 9486-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Yellow {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Bottom Groove}
* Change 7 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
own collection
|
|
Author: | elias3 | Posted: | Aug 15, 2018 08:37 | Subject: | Inventory Change Request for Set 8679-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 6 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Bottom Groove}
* Change 4 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 12 to 2}
* Change 6 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 10 to 5}
* Change 1 Part Medium Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 4 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} {match ID 11 to 10}
* Change 2 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
own collection
|
|
Author: | elias3 | Posted: | Aug 15, 2018 08:28 | Subject: | Inventory Change Request for Set 8638-1 | Viewed: | 8 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type) to 44567b Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Bottom Groove}
Comments from Submitter:
own collection
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|