Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | WhiteVanMan  | | Posted: | Oct 17, 2018 17:44 | | Subject: | Duplo Horses | | Viewed: | 75 times | | Topic: | Catalog | | Status: | Open | |
| Hi Cat Admins.
I have in my possession, 2 Duplo Horses which are not in the catalogue, but they
are clearly marked as LEGO.
1 is a black one, essentially the same as this:-
but has no hearts on it's left flank.
The second is a white one, with no extra markings except around the eye, which
are eyelashes, making the horse look quite feminine(?)
I have no idea as to what sets they would have come in, but looking at the listings
of this type of horse, we have the one with the hearts on it's flank, in
Black, and White, and the white one has a 'saddle' print which is not
the same as the Black one, so maybe a separate listing needs to be done for that
one?
I'll see if I can produce images for these two, but be aware that I can't
get them to be re-sized enough to be used, as I'm not computer savvy enough
for that.
Can anyone verify what I'm saying?
Paul
|
 |
| Author: | WhiteVanMan | | Posted: | Oct 10, 2018 07:00 | | Subject: | Re: Inventory Change Request for Set 76079-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, WhiteVanMan writes:
| | Please make changes to the following inventory:
* Add 1 Part 19159 Black Technic, Pin Double Triangle 1 x 3 with 2 Clips with Squared Pin Holes (Alternate)
Comments from Submitter:
Due to selling the other similar part in a recent order, I've worked out that this set has the above part as an alternate item, hence this request
|
OK Jangbricks video review confirms your findings 
https://www.youtube.com/watch?v=oEfzS34MrB0 time 3:58
|
I didn't look at the set review, but I can confirm that the set was sealed
when I parted it out.
I sold the older version of that part a couple of days ago, and when I went to
find it, I had the newer version.
Which is why I said that I'd 'worked it out', because I didn't
have that part new within my inventory, and the only set that it came from was
the one I'd parted out.
But, anyway, you've just confirmed it, and I was able to get the correct
version from my unbuilt UCS Slave one, to ensure that my customer got the correct
version.
Regards,
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Oct 9, 2018 14:45 | | Subject: | Inventory Change Request for Set 76079-1 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 19159 Black Technic, Pin Double Triangle 1 x 3 with 2 Clips with Squared Pin Holes (Alternate)
Comments from Submitter:
Due to selling the other similar part in a recent order, I've worked out that this set has the above part as an alternate item, hence this request
|
|
| Author: | WhiteVanMan | | Posted: | Oct 7, 2018 16:07 | | Subject: | Re: What about meeting the Buyers? | | Viewed: | 41 times | | Topic: | Suggestions | |
| In Suggestions, SezaR writes:
| | You also showed your age 
|
Ha Ha Ha...... 
| |
In Suggestions, WhiteVanMan writes:
| | In Suggestions, SylvainLS writes:
| | In Suggestions, WhiteVanMan writes:
| | | | Now I know your in California as I am —I’ll be right over !!!
|
Maybe do a detour to the UK, and bring a UCS Y-wing instruction book with ya....
I'll let you build my Eiffel Tower if you want.... 
|
Looks like the “special ads” section in some 1980’s newspaper
|
Now you are showing your age... lol
|
|
|
|
| Author: | WhiteVanMan | | Posted: | Oct 6, 2018 12:52 | | Subject: | Re: What about meeting the Buyers? | | Viewed: | 48 times | | Topic: | Suggestions | |
| In Suggestions, SylvainLS writes:
| | In Suggestions, WhiteVanMan writes:
| | | | Now I know your in California as I am —I’ll be right over !!!
|
Maybe do a detour to the UK, and bring a UCS Y-wing instruction book with ya....
I'll let you build my Eiffel Tower if you want....
|
Looks like the “special ads” section in some 1980’s newspaper
|
Now you are showing your age... lol
|
| Author: | WhiteVanMan | | Posted: | Oct 6, 2018 12:04 | | Subject: | Re: What about meeting the Buyers? | | Viewed: | 37 times | | Topic: | Suggestions | |
| | | Now I know your in California as I am —I’ll be right over !!!
|
Maybe do a detour to the UK, and bring a UCS Y-wing instruction book with ya....
I'll let you build my Eiffel Tower if you want....
Paul
|
| Author: | WhiteVanMan | | Posted: | Oct 2, 2018 07:43 | | Subject: | Re: 8270-1 and 8270-2 | | Viewed: | 24 times | | Topic: | Catalog | |
| In Catalog Requests, WFMTF writes:
| | I bought with a lot of other instructions also this one.
Please how can I add them to the catalog?
Thank you
Waltraud
|
They are already in the catalogue.
Look in the instructions category of the set, and you will see that the last
image is showing the 'tall' booklet.
Just make a note when you list them, stating that they are of the tall type?
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Sep 27, 2018 05:20 | | Subject: | Re: Is this baseplate faded?! | | Viewed: | 47 times | | Topic: | Catalog | |
| In Help, Mistress_Lisa writes:
| | In Help, SezaR writes:
| | I got this for first time:
It is not new. All the studs on the top are whitish and not 100% blue. It looks
strange. I am not sure if this is faded or not. If it is faded, it is faded in
a consistent way.
Let me know if you have or had this baseplate in the past and how you find mine
( it has dust on it but that is not an issue)
|
I would say it is sun damage.
Lisa
|
Not sun damage.
If that was the case, then the blue should be of a darker hue or in the worst
case, lighter.
This is very similar to wear and print rub off the studs.
If one looks, you have to agree that the actual baseplate is White, and the Blue
is the print...
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Sep 22, 2018 06:04 | | Subject: | Re: LEGO needs to.... | | Viewed: | 86 times | | Topic: | Colors | |
| In Colors, StormChaser writes:
| | In Colors, WhiteVanMan writes:
| | a picture of my recently passed away dog.
|
My condolences on your loss. 
|
Thanks, she was 13 and 1 month when she passed.
| |
| | The Mosaik programme calculated that I need to have 559 1x1 plates in Sand Blue...
|
Have you thought about using 1 x 1 tiles instead? They're plentiful in both
sand blue and sand green.
|
I've not thought about that, because I'm not sure if they would stand
out noticeably....
It's a thought....
I'll look into this.
Thank you,
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Sep 22, 2018 05:33 | | Subject: | LEGO needs to.... | | Viewed: | 217 times | | Topic: | Colors | | Status: | Open | |
| Hi Guys,
I'm really cheesed off right now, as I decided to dip my toe into the frustrating
world of BL's Mosaik designer, to re-create a picture of my recently passed
away dog.
The reason I'm cheesed off?
The Mosaik programme calculated that I need to have 559 1x1 plates in Sand Blue...
We used to fight over the 1x1 plates in Sand Green to complete the Statue of
Liberty and Yoda sets which in turn really pushed the prices of them up, and
then Lo and Behold, LEGO comes out with the Brickheadz Owen and Blue set, which
is now going to lower the prices... (need 288 of them as well... )
But with the 'unofficial' policy of old colours getting re-made (Dark
Turquoise comes to mind), I wonder if LEGO will actually re-release the 1x1 plate
in Sand Blue?
Ah well, rant/grumble over, I'm seriously debating of whether I could get
away by cutting a 1x2 plate in half?
Regards,
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Sep 14, 2018 10:42 | | Subject: | Re: Shades of blue | | Viewed: | 43 times | | Topic: | Colors | |
| In Colors, Skylar2010 writes:
| | In LEGO, Skylar2010 writes:
| | What is the difference between medium blue and sand blue ?
Is there a light blue somewhere in between those two?
|
Thanks
|
Be aware that the 'Brittle Blue' isn't an official LEGO or BrickLink
colour, but is a colour that has been noticed to have occured in the turn of
the century 2000-2003, and the composition of the plastic that this blue is in
is actually more 'Brittle' than the normal plastic, hence the name.
I have actually seen this colour across quite a few elements, including the 2x4
brick.
Earlier this year I was searching for this colour in a 2x4 for my palette, and
had to buy one from an European Seller, and when it arrived, I was so chuffed....
BUT....
Last week, I found one in a Bulk Lot of LEGO that I'd bought in February,
so I could have saved myself some money.... !
Ah well....
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Sep 13, 2018 10:58 | | Subject: | Re: Return the Catalog tab | | Viewed: | 57 times | | Topic: | Suggestions | |
| In Suggestions, WoutR writes:
| | In Suggestions, JulieK writes:
| | Please put it back.
It was the perfect word to describe where it took users.
|
I came to BrickLink for the catalog first, and started to buy later.
The catalog is not just a tool we use for selling, it is a hugely important way
to draw people to the site. I know that it has been gone for a long time, but
I would still love to have a separate catalog tab back.
|
I totally agree.....
BUT....
If according to the BL developers and admins, us sellers are supposed to be getting
new 'tools' and features to help us with our selling, I'm not sure
if there is any thing like this in the pipeline, so I guess it's a situation
of where we will need to wait and see...
However, saying that, I'd love to see an additional line within that drop
down box when I hover over the Market Tab, and that is to have 'Instructions'
I'm really fed up of having to input a set's number into the search bar
so that I can get to the instructions section.
Apart from that, I'm now used to going to the 'market' tab to get
to the parts section of the catalogue...
Just my 2p on this....
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Sep 10, 2018 16:08 | | Subject: | Re: Inventory Change Request for Minifig atl011 | | Viewed: | 30 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, WhiteVanMan writes:
| | Please make changes to the following inventory:
* Delete 1 Part 6041 Pearl Light Gray Propeller 3 Blade 3 Diameter
* Add 1 Part 6041 Flat Silver Propeller 3 Blade 3 Diameter
Comments from Submitter:
I've got 2 of the sets that this minifig comes from, and both were sealed, and I found that this propellor is actually in the newer colour of Flat Silver more than Pearl Light Grey, hence this change request. (I can't change the set's inventory to reflect this as well)
|
Here's the thing with PLG/flat silver parts: the catalog's really a mess
right now regarding those colors. It needs to be fixed, but right now the issue
is on hold. Sorry, but we're not going to be changing any PLG to flat silver
or flat silver to PLG for the time being.
|
OK
Then why not find out WHEN the newer style of Flat Silver that the LEGO group
uses first came in, and then state that all of the sets from THAT time will have
that style colour, so that we shall know WHICH colour is correct for a particular
part?
It's well known that there are 2 distinct colours for the Flat silver that
we are aware of, and it can be done in the same way as the Light Grey/Light Bluish
Grey saga came about over 10 years ago....
How can it not be resolved?
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Sep 8, 2018 12:54 | | Subject: | Re: SET 10765 | | Viewed: | 44 times | | Topic: | Inventories | |
| In New Sets, Poppie123 writes:
| | Hi There, Please can someone assist to auto part-out set 10765? Its not yet
available for part-out on Bricklink.
|
If you have the set, why not submit the set's inventory to the Catalogue,
as this will enable you to part it out...?
You see, ALL of the inventories that make up this catalogue have been submitted
by other people, myself included...
Regards,
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Sep 8, 2018 11:53 | | Subject: | Inventory Change Request for Minifig atl011 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 6041 Pearl Light Gray Propeller 3 Blade 3 Diameter
* Add 1 Part 6041 Flat Silver Propeller 3 Blade 3 Diameter
Comments from Submitter:
I've got 2 of the sets that this minifig comes from, and both were sealed, and I found that this propellor is actually in the newer colour of Flat Silver more than Pearl Light Grey, hence this change request. (I can't change the set's inventory to reflect this as well)
|
|
| Author: | WhiteVanMan | | Posted: | Sep 6, 2018 10:08 | | Subject: | Re: Dates of parts 'added' to a store. | | Viewed: | 34 times | | Topic: | Suggestions | |
| In Suggestions, WhiteVanMan writes:
| | Hi all.
When anyone looks in a store, and selects a certain part, there is in small grey
letters, showing the date that particular item was added to the store's inventory,
but as I have selected the option of having the particular item(s) 'retained'
within my inventory after it has been sold out, I would like to have this feature
removed as it makes it look as if a store is not adding any recent stock, which
is not entirely accurate.
Regards,
Paul
|
Any further news upon this issue?
I'm really surprised that this is still here, but surely it can be tweaked
to include the date of the newer additions of the parts have been added to a
store's inventory?
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Sep 5, 2018 17:32 | | Subject: | Inventory Change Request for Set 70902-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 44302 Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type)
* Add 1 Part 44302a Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove
* Delete 1 Part 44567 Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side (undetermined type)
* Add 1 Part 44567b Dark Bluish Gray Hinge Plate 1 x 2 Locking with 1 Finger on Side without Bottom Groove
Comments from Submitter:
I've just opened a seal example of this set intending to part out, and I've found that these are the hinges reflecting in this change
|
|
| Author: | WhiteVanMan | | Posted: | Sep 5, 2018 08:33 | | Subject: | Inventory Change Request for Set 70602-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 75c03 Reddish Brown Hose, Rigid 3mm D. 3L / 2.4cm (Extra)
Comments from Submitter:
The set's instructions shows that only one of these elements are used, but I have found 2 in both sealed sets, hence this request
|
|
| Author: | WhiteVanMan | | Posted: | Sep 5, 2018 08:04 | | Subject: | Inventory Change Request for Set 70602-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 44301 Black Hinge Plate 1 x 2 Locking with 1 Finger On End (undetermined type)
* Add 2 Part 44301b Black Hinge Plate 1 x 2 Locking with 1 Finger On End without Bottom Groove
Comments from Submitter:
Parting out 2 sealed sets reveals that this has the ungrooved version of this hinge, hence this request
|
|
| Author: | WhiteVanMan | | Posted: | Sep 5, 2018 07:42 | | Subject: | Inventory Change Request for Set 75173-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 44302 Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type)
* Add 2 Part 44302a Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove
* Add 2 Part 44302b Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End without Bottom Groove (Alternate)
Comments from Submitter:
Just parted out 3 of these sets and 2 had the hinge with the groove, and the other didn't which makes me believe that the set should have the one with the groove, hence this request
|
|
| Author: | WhiteVanMan | | Posted: | Sep 5, 2018 07:36 | | Subject: | Inventory Change Request for Set 70602-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 44302 Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End (undetermined type)
* Add 2 Part 44302a Light Bluish Gray Hinge Plate 1 x 2 Locking with 2 Fingers on End with Bottom Groove
Comments from Submitter:
Just opened 2 sealed boxes of this set to part out, and they have the hinges with the grooves, hence this request
|
|
| Author: | WhiteVanMan | | Posted: | Aug 21, 2018 17:05 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 20 times | | Topic: | Inventories | |
| In Catalog Inventories, Hygrotus writes:
| | In Catalog Inventories, WhiteVanMan writes:
| | In Catalog Inventories, Hygrotus writes:
| | In Catalog Inventories, WhiteVanMan writes:
| | In Catalog Inventories, Hygrotus writes:
| |
OK great
|
I've cancelled the original inventory as I couldn't add the newly added
parts from the catalogue, and the newer inventory is now submitted for approval.
The descriptions are adequate I think, but hopefully someone can submit split
images for the yellow 'face' elements, as this will be better than the
ones supplied by LEGO.COM
If this can be approved, it will be great as this means I'll be able to part
out the 2 sets that I have.
Thanks!
Paul
|
Ok thanks for message, will check it in just a moment
|
I've also added the correct colour image for the Dark Azure 2x3x2 curved
side brick, as it's a new colour for that part.
Cheers!
Paul
|
Perfect Checked and approved. Thank you very much for submiting this invenotry.
So maybe you submit more in the future
|
I have to say, thank you for approving this quickly as those 2 sets had been
bugging me for a while since I bought them to plunder the 2x4 Blue plates!
I think it's possible that I'll be doing more Duplo sets as I've
decided to get out of doing USED duplo as I have loads of vehicle elements that
I can't shift, and with all of the other parts that I have, they are just
taking up so much space that I could use for the normal LEGO elements.
Another reason why I'm getting out of the USED Duplo, is that there are more
and more Chinese Clones turning up at the car boot sales, so it will be really
hard to garner a decent return...
So, it depends upon whether I manage to see NEW Duplo at reduced prices or not.
Thanks, once again for the speedy approval of that set.
Regards,
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Aug 21, 2018 16:27 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 20 times | | Topic: | Inventories | |
| In Catalog Inventories, Hygrotus writes:
| | In Catalog Inventories, WhiteVanMan writes:
| | In Catalog Inventories, Hygrotus writes:
| |
OK great
|
I've cancelled the original inventory as I couldn't add the newly added
parts from the catalogue, and the newer inventory is now submitted for approval.
The descriptions are adequate I think, but hopefully someone can submit split
images for the yellow 'face' elements, as this will be better than the
ones supplied by LEGO.COM
If this can be approved, it will be great as this means I'll be able to part
out the 2 sets that I have.
Thanks!
Paul
|
Ok thanks for message, will check it in just a moment
|
I've also added the correct colour image for the Dark Azure 2x3x2 curved
side brick, as it's a new colour for that part.
Cheers!
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Aug 21, 2018 16:19 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 13 times | | Topic: | Inventories | |
| In Catalog Inventories, Hygrotus writes:
| |
OK great
|
I've cancelled the original inventory as I couldn't add the newly added
parts from the catalogue, and the newer inventory is now submitted for approval.
The descriptions are adequate I think, but hopefully someone can submit split
images for the yellow 'face' elements, as this will be better than the
ones supplied by LEGO.COM
If this can be approved, it will be great as this means I'll be able to part
out the 2 sets that I have.
Thanks!
Paul
|
|
| Author: | WhiteVanMan | | Posted: | Aug 21, 2018 14:18 | | Subject: | Re: Supplying a set's inventory | | Viewed: | 20 times | | Topic: | Inventories | |
| In Catalog Inventories, Hygrotus writes:
| | In Catalog Inventories, WhiteVanMan writes:
| | I've uploaded images for all of the printed bricks, and only 1 of the 3 'yellow'
ones got 'saved' into my folder/file.
All of the others are correct, with numbers according to BrickLink's style.
|
Not exactly They are still wrong
| |
Can you see where I went wrong with the 2x4x2 bricks with rounded ends?
Regards,
Paul
|
All decorated parts have their own entry with the same number as the main part
plus pb and following number in the numbering system of them in Bricklink.
So look at 4198 as an example, you have four new decotared version of this part.
Type in search 4198pb* (with asterisk), sort by "item number" and "down", result:
https://www.bricklink.com/catalogListOld.asp?pg=1&q=4198pb%2A&catLike=W&itemBrand=1000&v=1
See all decoreted have their own separate entry. So you must now crate whole
new entry for four your parts. Thanks to this searching you see the next free
number will be
4198pb31. So crate 4 parts 4198pb with following numbers 4198pb31, 4198pb32,
4198pb33, 4198pb34, describe them in name - add in name what is their pattern.
You can see also in this search how other are named, you can create somthing
similar. But in name for this part there always must be "Duplo, Brick 2 x 4
x 2 Rounded Ends ... Pattern" for "..." you enter your description of pattern.
Then add photos for such crated parts.
Now repeat this for all your new decorated bricks: 31110, 3011, 98223, 31111.
Create new entries with "pb".
Marek
|
I actually saw where I went wrong.
I'd listed the images before I'd changed the numbers of the parts, and
this accepted the images which was wrong as the part(s) were already in the catalogue!
I think I've done it correctly now, and all it need is for the naming of
the parts to be tidied up.
I've also added the dimensions of the set, and if the parts can be approved,
I can add them to the inventory.
Regards,
Paul
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
