Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | SylvainLS | Posted: | Aug 17, 2018 18:27 | Subject: | Re: Seeking Opinions on Part Assemblies in Invs | Viewed: | 33 times | Topic: | Catalog | |
| In LEGO, randyf writes:
| […]
Just to reiterate, I am not in favor of wheel and tire assemblies in inventories
unless they came that way and are listed in the Regular Items section. Wheels
and tires are not hard to take apart. My kids have been doing it since they were
young.
|
I remember having had problems with this one as kid:
* | | 8c02 (Inv) Plate, Modified 2 x 2 with Wheel Holder Bottom with Red Wheel with Black Tire Offset Tread Small (8 / 3464c02) Parts: Aircraft |
(Both wheel from plate and then tire from hub.)
|
|
Author: | SylvainLS | Posted: | Aug 17, 2018 13:15 | Subject: | Re: Just how many pieces ARE in LEGO 10214? | Viewed: | 53 times | Topic: | Inventories | |
| In Catalog, SteveDJ writes:
| I was Googling for some pictures of the LEGO Tower Bridge, set 10214. What I
find interesting, is that there are two different versions of the set BOX --
with one version showing 4287 pieces, and another version showing 4295 pieces.
The catalog entry here shows 4287. Yet, there is no supplemental information
as to what happened?
If anything, the box art WITHOUT the tree in the corner, but instead showing
the Expert label/icon, looks like the more recent box. And it is the one showing
4295 pieces.
Is the catalog entry here not up to date?
|
In the recent production runs,
has been replaced with
which have holes.
So TLG added 8x White
so that you don’t see the coloured parts inside the towers through the holes.
And 4287 + 8 = 4295.
The match ID for the alternate model is 99.
Funnily, with these 2x4 plates, there are Medium Blue 1x2 plates that are not
useful anymore but that are still included.
|
|
Author: | SylvainLS | Posted: | Aug 16, 2018 07:08 | Subject: | Re: Cart/wishlist sharing | Viewed: | 26 times | Topic: | Suggestions | |
| In Suggestions, saxus writes:
| Sometimes we make BL orders together with one or more friend to optimize shipping
costs. This is a little bit hard to do specially with lot of lots.
It would be very nice if there will be an option to invite somebody to an order
to add an another batch. For example, if i get an invite, i could add a batch
to my friend's order from my own account. It would be a spearated batch named
to me.
Obviously it could be a solution to share each's password, but obvious security
reason it's not really a fun solution.
And also: it would be nice if we have the itemNo with link to the catalog on
the shop's store page like in the global store page.
|
First, sharing WLs is a “feature coming soon!” (look at the setup screen for
any of your WL).
Second, you can download ( button on the WL’s page ) and upload ( https://www.bricklink.com/v2/wanted/upload.page
) WLs. So you and your friends can share them through other means (e-mail…).
|
|
Author: | SylvainLS | Posted: | Aug 15, 2018 17:16 | Subject: | Re: Wrong color item shown on Appears In page | Viewed: | 21 times | Topic: | Suggestions | |
| In Suggestions, SylvainLS writes:
| […]
What do you mean by “on the next page” ?
Selecting a colour doesn’t change the page.
|
Okay, I get it: clicking on a colour name in the Known Color column in the Color
Info tab, not the colour selection box on top of the picture.
Yes, the link leads to a page (e.g. https://www.bricklink.com/catalogItemIn.asp?P=4073&colorID=36&in=A
) that shows the part in another colour.
|
|
Author: | SylvainLS | Posted: | Aug 15, 2018 17:12 | Subject: | Re: Wrong color item shown on Appears In page | Viewed: | 19 times | Topic: | Suggestions | |
| In Suggestions, patpendlego writes:
What do you mean by “on the next page” ?
Selecting a colour doesn’t change the page.
Anyway, when I select a colour, I get the picture in that colour.
And changing the lower tab to “Price Guide” instead of “Color Info” (my default)
shows me the price guide for the colour I just selected.
| Even though the text states the color selected.
BrickLink... please show the image of the color selected.
|
What would be nice (too) would be sorting the Known colours by name….
|
|
Author: | SylvainLS | Posted: | Aug 11, 2018 19:03 | Subject: | Re: Improvement to super-lots? Paired items. | Viewed: | 26 times | Topic: | Suggestions | |
| In Suggestions, StormChaser writes:
| […]
Paired part entries may make things marginally easier for sellers, but the added
burden of work on everyone involved does not, IMO, justify them. Also, I doubt
they'd be used enough to justify their existence.
|
Also, don’t forget that when you have “left arm” and “right arm” in a wanted
list, “left and right arms” is never suggested, and vice versa.
The complete minifig isn’t suggested either if you parted it out in your WL.
Same for sets.
When looking for a minifig part (which is rare but happens), I add both the part
and the minifigs that use it (if they are affordable). I would have to do the
same if there were paired parts….
Of course, if the search algorithms were to be modified to help me do that, that
would be wonderful.
And if they could also help search for multiple colours without having to look
for N/A and a bunch of colours I don’t want…
And if they could point me to a set or incomplete set that has a bunch of the
parts I want and which is for sale for cheaper than I would have to pay for the
parts…
And I’d want a poney too.
|
|
Author: | SylvainLS | Posted: | Aug 10, 2018 19:12 | Subject: | Re: Fake picture for Lady Iron Dragon / Misako | Viewed: | 58 times | Topic: | Catalog | |
| In Catalog, tEoS writes:
| The picture for this minifig seems fake or maybe a digitally altered photo from
Lego.
I find it a bit misleading since the head on the actual fig is garbage and certainly
not like the BL minifig photo. My head is such a thin yellow that the black
shows through in most spots.
|
Yes, the shadows on the chin make me say “render!”
The head’s picture is more realistic:
* | | 3626cpb2021 Minifigure, Head Female Balaclava with Yellow Face, Black Eyelashes, Tapered Eyebrows, Neutral Expression Pattern - Hollow Stud Parts: Minifigure, Head |
|
|
Author: | SylvainLS | Posted: | Aug 9, 2018 11:11 | Subject: | Re: need new filter function for this website | Viewed: | 37 times | Topic: | Suggestions | |
| In Suggestions, SGTENIGMA writes:
| i have one suggestion that i think all would greatly appreciate. the function
capability to isolate and block individual sellers. what i mean is to make it
where if you have unsatisfactory service, you the buyer, can highlight the specific
seller and put him on your own block list. much like facebook. so that way, you
no longer see the seller when you search for future lego products. for the bad
shops will be filtered out and you wont see them. i just had an order that i
cancelled. i was instructed to go thru paypal and enter all their info in order
to buy their products. instead of going thru bricklink to get thru to paypal.
in other words, they wanted to circumvent the percentage you guys make when each
sell happens. so i refuse to let them circumvent and cut you out. pretty sure
they will give me a bad review. dont care. i believe in being honest. but i find
it frustrating that i have to write down each bad seller and have to review my
own list before buying. that is timeconsuming. appreciate it!
|
See https://www.bricklink.com/pref_favorite.asp?v=L&viewType=
And all the settings for the different searches….
|
|
Author: | SylvainLS | Posted: | Aug 9, 2018 07:30 | Subject: | Re: Inventory Change Request for Set 6881-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
| In Inventories Requests, Admin_Russell writes:
| In Inventories Requests, SezaR writes:
| Hi Admin_Russell,
As I had mentioned, I only had one 3942a (in any color) and it came with this
set. Why is this rejected?
|
I think you should take this as a nudge to go in a different direction. Instead
of splitting hairs over these early variants, there is a lot of basic inventory
work to do on the site, even in older inventories. Wrong quantities, wrong colors,
missing things...
If you really like variants perhaps you should start working more with newer
inventories where there is easy access to sealed contents. You may find it more
rewarding to work with first hand information.
|
That doesn’t answer the question.
FWIW, I have five White 3942*, two come from 6970-1, two come from two 6920-1,
and one comes from 6881-1.
Three of them are 3942a, two are 3942c.
Therefore, two 3942a come from 6970-1 (1980), the two 3942c come from the two
6920-1 (1986), and that leaves one 3942a for 6881-1 (1984).
On the other hand, I have three Black 3942*, two from 1212-1 and one from 6951-1.
One is a 3942c. I can’t say for sure from where it comes, maybe my 1212-1 had
one of each….
|
|
Author: | SylvainLS | Posted: | Aug 4, 2018 05:48 | Subject: | Re: Photo of Black 3942b | Viewed: | 32 times | Topic: | Catalog | |
| In Catalog, SezaR writes:
| I guess something is wrong with the photo of black
It is supposed to be in two colors: black and (light) gray
|
It looks like a mirror effect, not gray
|
|
Author: | SylvainLS | Posted: | Jul 30, 2018 16:57 | Subject: | Re: 4495, now 4495a and 4495b | Viewed: | 51 times | Topic: | Catalog | |
| In Catalog, edeevo writes:
| […]
I don't see the point in mocking the issue I raised:
|
The point wasn’t mocking the issue you raised, it was just a jest around the
admins’ argument in this recurring discussion, both to present it and to “mock”
it, because, frankly, both sides are right (or are they both wrong?).
Anyway, the only half-solution I see (and that solution is not new and shows
up as often as this problem is raised in one form or another) that could please
and help both sellers and buyers a bit more than what we have now is to have
a system where variants could be merged (in a “undetermined” upper-level part
or in some kind of group). Sellers and buyers could choose to differentiate
or not. Buyers would be presented with XXX*, XXXa, or XXXb when they say they
want XXX*, but not with XXX* if they want XXXa.
Notwithstanding the many technical and especially UI problems (How to present
this so that newbies understand?), the problem would also then be with the “Price
Guide Which is Not a Guide but Which is Used as One” (Where do you place sales
for XXX*? Are sales for XXXa and XXXb also included in XXX*?…).
|
|
Author: | SylvainLS | Posted: | Jul 30, 2018 15:19 | Subject: | Re: 4495, now 4495a and 4495b | Viewed: | 57 times | Topic: | Catalog | |
| In Catalog, edeevo writes:
| […]
Except that the problem with doing this (removing the undetermined entry) will
only cause many Sellers to list either/or version of the flag into either/or
entry... meaning that they will continue to not make a distinction between the
two, but list them in one of the two available entries (and *maybe* leaving a
note stating that they "do not distinguish between versions of this part" if
you're lucky)... In other words, you may think you will not have a catalog
"stuffed with undetermined entries", but the two catalog entries will actually
be stuffed with items that are really undetermined (i.e. if the goal was to force
Sellers into listing their items into the appropriate catalog entries, this will
not fix that... many still list similar items in one category or another without
an undetermined entry)...
To be clear, I will more than likely separate each of the flags in my inventory,
to maintain consistency in having my listings correctly identified... but having
been a Buyer from numerous Sellers with the same sort of parts, I can confidently
say I am one of the rare Sellers that does make those distinctions; hence the
problem I identified above...
|
Thing is, if there were an “Undetermined LEGO Part” entry, some sellers would
use it to list all their parts
(Well, maybe they would need two entries: one for cheap parts and one for expensive
parts )
|
|
Author: | SylvainLS | Posted: | Jul 30, 2018 12:12 | Subject: | Re: 4495, now 4495a and 4495b | Viewed: | 48 times | Topic: | Catalog | |
| In Catalog, axaday writes:
| […]
A majority of the market will not care which way the flag is waving.
|
Besides the date accuracy, they are often used in pairs, and it’s really not
aesthetic not to have both flames of a pair bending the same way.
|
Author: | SylvainLS | Posted: | Jul 26, 2018 17:07 | Subject: | Re: Trans-Clear not a known color for 3001? | Viewed: | 30 times | Topic: | Colors | |
| In Colors, WoutR writes:
| […]
Last use in a set was 1987.
|
My understanding was that the catalogue wasn’t accurate as the 300[123]old entries
are relatively recent.
| Used parts are common, but modern trans-clear bricks are rare.
(Does anyone know why?)
|
TLG realized their colour QA was awful?
|
|
Author: | SylvainLS | Posted: | Jul 26, 2018 16:32 | Subject: | Re: Trans-Clear not a known color for 3001? | Viewed: | 36 times | Topic: | Colors | |
| In Colors, pikachu3 writes:
| In Colors, SylvainLS writes:
[…]
| Trans parts don’t have internal supports, they use the old mould.
3001old doesn’t only mean old 3001 bricks, it also means 3001 without support.
|
I have trans-clear 3001 bricks with cross-supports, and even a recent one with
thin walls (fully modern 3001). They do exist, but they're only used for
internal models like in LegoLand parks.
|
Yes, a “Generally” or “common [parts]” was missing in my first sentence. The
point I really wanted to make was that the “old” in “3001old” is for “old mould,
without cross supports,” not “old mould, for old bricks that were made decades
ago and that are not made anymore.”
Unless TLG is sitting on a big pile of old trans bricks, they are still using
the old moulds.
Many parts have two moulds and two Design IDs, one for ABS (solid colours) and
one for PC (transparent colours) (“ABS” or “PC” is sometimes included in the
official name), even when the differences (in the resulting bricks) aren’t obvious.
|
|
Author: | SylvainLS | Posted: | Jul 26, 2018 10:41 | Subject: | Re: Trans-Clear not a known color for 3001? | Viewed: | 46 times | Topic: | Colors | |
| In Colors, patpendlego writes:
| In Colors, aleydita writes:
| In Colors, patpendlego writes:
| Hi,
I am looking at the known colors for part 3001, cause I want to update my set
of example color bricks, there are much more in the price guide info than known
colors...
E.g. Trans-Clear is not a known color for part 3001, how is that possible?
Thx,
Arnoud
|
Maybe all trans clear 2 x 4 bricks in official sets are of the 3001old variety?
Would certainly match the release dates of those sets. Current trans 3003s are
of the 3003old variety but are listed under 3003 as per BL policy, so any 3001
trans that surfaced now would probably still be of the 3001old variety.
|
3001 trans clear not used in any set? that could explain it indeed
|
Trans parts don’t have internal supports, they use the old mould.
3001old doesn’t only mean old 3001 bricks, it also means 3001 without support.
|
|
Author: | SylvainLS | Posted: | Jul 23, 2018 13:25 | Subject: | Re: Inventory Change Request for Part 44658c01 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, sleeper447 writes:
| Please make changes to the following inventory: [P=44658c01]
* Change {2 to 4} Part (Variable Color) 44658a Minifig, Weapon Knife
Comments from Submitter:
There is only one item (2 knives) registered, however you can clearly see on the box that there are 2 knives in the construction and 1 hold by the merman. Since they come by two as far as I know, it would seems that there are then 2 items, resulting in 4 knives.
|
It seems what you want is to change the inventory of a set (the one with the
merman) but this request is asking for a change in the inventory of the part
(the two knives as they come attached in new sets), not the inventory of a set.
|
|
Author: | SylvainLS | Posted: | Jun 5, 2018 10:46 | Subject: | Re: Personal inventory (non sellers) | Viewed: | 58 times | Topic: | Suggestions | |
| In Suggestions, tEoS writes:
It’s a suggestion, not a question
The purpose is the following ( https://www.bricklink.com/messageTopics.asp ):
“Suggestions to the BrickLink Admininstration to improve website functionality
and design.”
Yes, Rebrickable allows to check set or public MOCs inventories with personal
part lists/inventories. But having a few inventory/WL features on BL would be
better than having to work around with third party tools (with all the hassles
of exporting / importing and handling the different nomenclatures).
Just having the possibility to merge or substract two wanted lists, or a WL and
an order or a set inventory would be a great improvement.
|
|
Author: | SylvainLS | Posted: | May 31, 2018 17:32 | Subject: | Re: Classic Wanted List Unavailable on June 5th | Viewed: | 104 times | Topic: | Suggestions | |
| In Administrative, Bionicleseller writes:
| […]
Remember, if we
cannot figure it out, imagine what it must be like for newcomers?
|
Remember they are not hampered as you are by your knowledge of the olden ways.
| Thankfully the new list hasn't been removed. Let's keep it that way........please.......
|
I think you meant “classic,” not “new”
|
|
Author: | SylvainLS | Posted: | May 28, 2018 07:42 | Subject: | Re: Improve add item screen | Viewed: | 34 times | Topic: | Suggestions | |
| In Suggestions, Pippyblocks writes:
| Out of interest, I noticed some of your used plates are slightly more expensive
than your new ones. I've noticed this with my inventory before when I've
gone through to adjust pricing and wondered why / how this happened because obviously,
customers would pick out the new over used as it is cheaper.
|
Not necessarily. Some people are only looking for Used, some of them for authenticity,
some of them (wrongly) believing Used is always cheaper than New.
So the parts could still be sold
|
|
Author: | SylvainLS | Posted: | May 17, 2018 12:01 | Subject: | Re: What happened to the best price button | Viewed: | 65 times | Topic: | Suggestions | |
| In Suggestions, Cob writes:
| In Suggestions, JAFO writes:
| What happened to the best buy button when purchasing wanted lists? It a load
of poo that the system takes a much higher price. I had 6 items that came up
to over $35.00 when using auto select. The same items cost me $2.50 all from
one store when searched out manually.
|
It went away a while ago, there have been some pretty long threads discussing
the disappearance of the feature.
|
The three options, “Lowest Price,” “Fewest Stores,” and “Best Price,” were just
heuristical sets of parameters for the approximating algorithm, and they were
given names according to what the results were hoped to be. But:
“Fewest Stores” sometimes gave a lower price than “Lowest Price.”
“Lowest Price” sometimes gave fewer stores than “Fewest Stores.”
No one never knew what “Best Price” meant.
And I’m sure people tried all three every time.
At one time, BL realized the names were a bit too optimistic (not to say misleading),
and they chose to reduce the choice to only one option, which I think can be
dubbed “Best,” whatever that might mean.
And we still don’t know what it does.
And there are still weird, unexplained, uncommented things happening.
|
|
Author: | SylvainLS | Posted: | May 10, 2018 18:16 | Subject: | Re: Inventory Change Request for Set 7817-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, SylvainLS writes:
| If I may add my brick: an inventory isn’t gospel truth, it’s a crowd-sourced
work-in-progress.
We might never know an inventory is “complete” / won’t ever change anymore: fifty
years from now, someone might dig up and open a sealed set with another variant
or extra.
|
Of course you're right. Your observation relates to all matters, though,
and touches on the very nature of truth itself. I am of the opinion that absolute
assurance is foolhardy and the wiser position to take regarding any fact is varying
degrees of certainty.
|
You absolutely sure about that?
| There is a celestial body we have named the Sun which casts light onto the Earth,
for example, but I am only 99% sure of that. I do not say it is a certainty
because it could be shown wrong one day.
|
Yes, but there are some things we can hold for true without much consequences
in many occasions in our day-to-day lifes, and some others for which it might
be harmful more often.
It’s one thing to assume (but for one day every (about) four years when you need
to catch up) that a day is exactly 24h, it’s another to jump and buy expensive
parts because you believe an inventory is perfect and your just-bought set has
the wrong variants.
|
|
Author: | SylvainLS | Posted: | May 10, 2018 17:12 | Subject: | Re: Inventory Change Request for Set 7817-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, SezaR writes:
| | Can we agree on the following sentence?
A set inventory is not incorrect or incomplete just because it doesn't include
every possible variant and alternate variant which ever appeared in the set during
the years it was released.
|
I am sorry but I would consider it incomplete.
|
Good lord, don't be sorry for having an opinion! We just disagree on that
particular point and we were finally able to pinpoint the exact cause of the
disagreement. That's a good thing.
My viewpoint is that if the inventory includes all the parts required*, then
it is complete. The inventory is imperfect (for collectors) if the variants
are not period-specific, but it is not incorrect or incomplete.
I agree with your efforts to get the inventories as perfect as possible, but
I'm expecting the highest standard of proof for tweaking inventories into
perfection. I think the collectors who care about these sets expect and deserve
only the best sources. That highest standard of proof is difficult to locate
for these old or rare sets and I understand and sympathize with your difficulties
in locating quality sources.
*All parts required to build the main model plus any other items on the official
parts list. In the absence of a parts list, the instructions, box images, and
official part count may be used to determine as closely as possible the constitution
of the Regular section.
|
If I may add my brick: an inventory isn’t gospel truth, it’s a crowd-sourced
work-in-progress.
We might never know an inventory is “complete” / won’t ever change anymore: fifty
years from now, someone might dig up and open a sealed set with another variant
or extra.
|
|
Author: | SylvainLS | Posted: | May 8, 2018 09:18 | Subject: | Re: price overview when buying a wanted list | Viewed: | 38 times | Topic: | Suggestions | |
| In Suggestions, SchmickBricks writes:
| […]
I totally agree, and suggest BrickLink go one step further and remove the ability
for stores to adjust their prices to the current 6 month average for consolidated
lots when parting out sets as it's only serving to drive prices down either
further.
[…]
Stores would still be able to adjust prices manually of course, but who really
has the time to check the prices of 10,000 lots against the current average price?
|
People are already using third party tools (theirs or BrickStock) that can do
that easily.
The more you restrict tools in BL, the more people will use tools outside of
BL (and continue bitching there aren’t enough sellers tools in BL).
| I would imagine the declining prices would be having a knock on effect with BrickLink's
income, so any steps to address the declining prices are in their best interest
too.
|
Price fixing, or limiting people’s ability to set their own prices, isn’t a solution
(apart from being illegal).
|
|
Author: | SylvainLS | Posted: | May 5, 2018 16:46 | Subject: | Re: Muting/ignoring forum member feature? | Viewed: | 45 times | Topic: | Suggestions | |
| In Suggestions, Heartbricker writes:
| […]
Thanks Again! definitely not ignoring you! you've been a great resource and
help today and in the past!
|
Thanks. I was just joking: suggestions are always triggered by recent events,
so the people having participated in the last dispute could think you were bored
with them
By the way, you can see how many people ignore you in your My Activity page (just
above the defunct Chat subsection at the bottom), but you can’t know who they
are.
I’m of the grumbling and sarcastic but helping sort, I like to think the helping
part explains why I’m only on 7 ignore lists
|
|
Author: | SylvainLS | Posted: | May 5, 2018 15:48 | Subject: | Re: Muting/ignoring forum member feature? | Viewed: | 66 times | Topic: | Suggestions | |
| In Suggestions, Heartbricker writes:
| is there an option screen/ignore/mute or picking members i don't wish to
see forum posts from?
Kind of like a stop list but only for forum?
|
Bottom of this page:
https://www.bricklink.com/messageFilter.asp?viewFrom=P
| I used to be more active here but feel like in recent years some people have
been spamming or have consistently been posting topics i don't wish to see.
if there's nothing like that i might make a suggestion to add this feature.
if such feature doesn't exist- i'd like to see one implemented, would
like the feature to be anonymous since while i might not want to see certain
people's posts- i certainly do NOT wish to offend them.
|
Too late?
|
|
Author: | SylvainLS | Posted: | May 3, 2018 16:46 | Subject: | Re: Inventory Change Request for Set 2452-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| […]
How many of these famous people can you identify WITHOUT searching for their more commonly-known names?
|
What if that number doesn’t change AFTER having searched for the more commonly-known
names?
|
|
Author: | SylvainLS | Posted: | Apr 29, 2018 11:35 | Subject: | Re: Classic Wanted List Unavailable on June 5th | Viewed: | 84 times | Topic: | Suggestions | |
| In Administrative, moscu writes:
| How I am supposed to set prices and quantities once I place item in a list?
|
Depends.
If you put it from the item’s page, there are fields in the dialog.
If you want to change / add something when looking at or searching in your WLs,
you just click on the field you want to change and the WL goes in edit mode.
You go out of edit mode by clicking the “Save Changes” button that appeared
in the blue line at the bottom of the screen or by hitting the Enter key.
Or you can do batch changes with the leftmost checkboxes and the menu just above
the header (move, copy, apply colour, condition…).
| How can I see what the lowest prices for a piece in a list?
|
Use the price guide.
Or you can show a few stores for each item if you click “More Options” (near
the “Search Wanted List” field) and then click “Show” in the rightmost column.
Don’t forget to change the sort option (stupidly defaults to store name) and
to click “Apply.”
| I never have use the new one I always click on classic because it is much easier
to navigate and do what I need.
|
Remember when you learned how to use the “classic” one? Go the same way: try.
If you never try, you never learn.
| This change remind me of Microsoft changing the
search features in the "File Explorer" or removing the Program Menu. It was never
a good Idea.
|
I don’t remember MS ever having had a good idea for its users.
|
|
Author: | SylvainLS | Posted: | Apr 27, 2018 18:23 | Subject: | Re: Inventory Change Request for Set 6362-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| I don't understand
All tiles, regular or alternative, are with grooves?
|
The redesign was a change of colours.
This set isn’t old enough to have come with ungrooved tiles.
|
Author: | SylvainLS | Posted: | Apr 19, 2018 18:41 | Subject: | Re: Inventory Change Request for Set 1046-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, Admin_Russell writes:
| […]
| | A true cliff hanger...
|
Where people named Cliff are housed?
|
Woops...
|
Sorry, I know making fun of typos is rude but I couldn’t stop myself
|
Author: | SylvainLS | Posted: | Apr 19, 2018 16:11 | Subject: | Re: Inventory Change Request for Set 1046-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, Admin_Russell writes:
| […]
| | However, I'm not requesting those changes right now because
|
This sentence was left purposely unfinished to give a nice touch of mystery to
the whole affair.
|
A true cliff hangar...
|
Where people named Cliff are housed?
|
Author: | SylvainLS | Posted: | Apr 18, 2018 09:56 | Subject: | Re: Inventory Change Request for Set 926-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| […]
| I'm sorry, I should have been more specific. I'm interested in videos
or photos of a new space set which included the space figures and sticker sheets
we're discussing.
|
So you don't believe Paul, nor Reza, nor me about the stickersheets and plain
torso's?
|
I don’t think it’s about “believing,” more about having proof for the future.
|
|
Author: | SylvainLS | Posted: | Apr 13, 2018 15:13 | Subject: | Re: Inventory Change Request for Set 10246-1 | Viewed: | 34 times | Topic: | Inventories Requests | |
| In Inventories Requests, 1977_mauro writes:
| […]
"Normaly Lego add one extra of part 4073 per bag (of course there are exeptions
like in some 2017 sets)"
-- No, see my approved change request for Ship in the bottle, there were
5 extra light blue round plates included into this set, but only 3 bags with
these
plates. Two bags had 2 plates extra in each bag - and this set came out 2018...
|
Though this set is hardly “normal,” with all the water round plates needed (284).
It isn’t unbelievable that “rules” for bags of mixed bricks with a couple of
round plates aren’t the same than the ones for special bags with dozens of them.
Now, what I think is that TLG noticed we had their rules figured, so they randomly
change them.
|
|
Author: | SylvainLS | Posted: | Apr 10, 2018 14:08 | Subject: | Re: Price guide rant | Viewed: | 41 times | Topic: | Suggestions | |
| In Suggestions, TheBrickGuys writes:
| […]
What do people use the average of the "Current items for sale" info for? I would
think that the 6 month sales average info is much more important. It has been
brought up here many times and I don't understand why people don't use
the 6 month sales average instead?
I am asking this not to be snarky in any way, I am just wondering if maybe I
am not seeing the importance of that information and thus missing out on the
use of it.
|
Both are useful.
When you want to set a price on a item (buying or selling), you look at how much
similar items were sold for in the recent past but you also look at how much
it can be bought now. And how many were sold and how many are for sale now.
Say something sold for $5 last months but you can’t find some for sale below
$6 now. What help does the past sales give you? Will you wait until the price
goes below $6 again? What if that never happens?
Or the other way around, something sold for $6 but now you can easily find it
for $5. If you’re a seller, if you price it at $6, you won’t sell yours before
all the ones at $5 are sold ; and that could take a long time. And if you’re
a buyer, if you only check the sold price, you’ll be happy buying at $6 when
you could easily have had the item for $5.
All info is useful.
|
|
Author: | SylvainLS | Posted: | Apr 10, 2018 09:22 | Subject: | Re: Price guide rant | Viewed: | 92 times | Topic: | Suggestions | |
| In Suggestions, TBS writes:
| […]
median is already there via the quantity average.
|
No. Median and quantity average are totally different notions.
(E.g. prices 2x$1, 1x$4, 1x$5, 1x$10, lot average = (1+4+5+10)/4 = $5, qty average
= (1+1+4+5+10)/5 = $4.2, median = the 3rd price = $4.)
Still, you can find the median by looking at the “raw” data and adding all the
quantities until you get to half the total quantity.
| […]
Problem is more, people desperately hang on to non weighted avg prices in stead
of their weighted qty avg.
|
Problem is people hanging on the price guide
|
|
Author: | SylvainLS | Posted: | Apr 3, 2018 16:21 | Subject: | Re: parts colour matt or shiny | Viewed: | 24 times | Topic: | Suggestions | |
| In Suggestions, todeluca writes:
| In Suggestions, SylvainLS writes:
| Softer materials (plants, horns…) are matt, but I don’t think there are bricks
that come in both ABS and PP or other soft plastic.
|
| no bricks come in both shiny and matt,
|
Actually, part (53451) originally came in shiny (harder) plastic when it was
first introduced, but was later changed to matte (softer) plastic. I am not sure
exactly when this occurred, since Bricklink does not differentiate between the
original and revised versions of the part.
|
Okay. I can see how there could be other such examples of LEGO tweaking materials
from time to time.
Anyway, I think for such little differences, a simple note should suffice (something
like “Early parts came in harder, more shiny plastic.”). There should be no
need for a doubling of all the colours with shiny/matt variants… otherwise we
could also want a new colour for each material (cloth, rubber, paint…). There
is already enough variation in parts in the “same” material and colour to make
them sometimes hard to recognize.
|
|
Author: | SylvainLS | Posted: | Apr 3, 2018 10:08 | Subject: | Re: parts colour matt or shiny | Viewed: | 39 times | Topic: | Suggestions | |
| In Suggestions, az0 writes:
| To admin,
Regarding parts and colour entry.
It would be good if there were an entry to say whether the colour is matt or
shiny. I have to replace a part on Harry Potter Knight's bus. The original
was shiny black but the part I received as a replacement was matt.
On this particularly set it is rather noticeable so rather than have to email
each seller to ask if they have a shiny black part it would be good if it were
stated. Not sure if Lego make the distinction but it makes a difference to the
look of the set when its a visible part.
|
All new bricks are shiny. It’s when they are used and get lots of micro-scratches
that they become matt.
Softer materials (plants, horns…) are matt, but I don’t think there are bricks
that come in both ABS and PP or other soft plastic.
So,
either the shiny/matt clash comes from different materials and it’s useless to
differentiate “colour X shiny” and “colour X matt” on BL because no bricks come
in both shiny and matt,
or the shiny/matt clash comes from new/mint bricks vs. older/scratched bricks
and it’s a matter of asking sellers in what condition are their bricks prior
to ordering.
|
|
Author: | SylvainLS | Posted: | Mar 28, 2018 16:25 | Subject: | Re: Inventory Change Request for Set 10260-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, mhortar writes:
| […]
Actually, that's something I've been curious about recently as well.
I seem to remember (possibly incorrectly though!) that there were always an extra
part when certain small parts were in a bag, so if you had the same part in multiple
steps, you would get multiple extras of that part.
In recent sets (maybe only 2017/2018 sets, but I can't say for certain) it
seems like the first time a small part shows up in a set, there is an extra one,
but if the part appears again in a later step, there is no extra part.
Anyone else experience this, or am I just getting old and the memory is going?
|
In 2017, I came up with a “pair” theory ( https://www.bricklink.com/message.asp?ID=1060309
). But I don’t buy enough sets to know if it was true for more than the sets
I bought at that time.
My latest sets were mostly regular: they followed the “old” rule of one extra
for the usual parts (1x1 plates, tiles, slopes…) for each bag.
10260-1 is regular but for (if I remember correctly):
1. the antennas,
2. a “missing” LBG 1x1 tile round (consistent with the “pair” theory),
3. a “missing” Trans-Clear 1x1/cheese slope (consistent with the “pair” theory),
4. two “missing” Black bars 3L,
5. a “missing” technic pin 2780 (consistent with the “pair” theory).
They could have changed their way of counting in a particular factory, or on
some chains/machines in that factory, or for some sets (size / contents), or
temporarily, or….
|
|
Author: | SylvainLS | Posted: | Mar 28, 2018 14:06 | Subject: | Re: Inventory Change Request for Set 10260-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, SylvainLS writes:
| Please make changes to the following inventory:
* Change {1 to 2} Part Lime 98138 Tile, Round 1 x 1 (Extra)
Comments from Submitter:
From sealed set. (Well, not sealed anymore )
|
Makes sense. The first lime tile comes in bag 1 and the second comes in bag
2. I've approved your request.
|
Thanks.
| This was my first time inventorying a set this large from physical contents,
so if you find any other errors please let me know.
|
When building, I trust BL inventories and just check the extras, so I can’t say
for the regulars but there were no other differences for extras.
About the “Makes sens,” there are things that don’t make sense: Why did we both
get extras for the Black and LBG antennas in bag 3 but got none for the LBG one
in bag 4?
|
|
Author: | SylvainLS | Posted: | Mar 28, 2018 13:33 | Subject: | Inventory Change Request for Set 10260-1 | Viewed: | 46 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {1 to 2} Part Lime 98138 Tile, Round 1 x 1 (Extra)
Comments from Submitter:
From sealed set. (Well, not sealed anymore )
|
|
Author: | SylvainLS | Posted: | Mar 20, 2018 10:58 | Subject: | Re: Classic Wanted List Unavailable on June 5th | Viewed: | 92 times | Topic: | Suggestions | |
| In Administrative, pedrogcosta writes:
| Hi,
There is any way to see, in the new wanted list, the most cheap stores for each
part in a wanted list as I can do in the old/classic wanted list?
|
Yes.
Open a WL.
Click “More Options” next to its search field.
Right column, “Items for Sale Options:” click “Show” and look at the options
below, especially the sorting option as by “Store Name” is the stupid and useless
default.
Then click “Apply”.
Note that there’s a “Best Price” sorting option next to “Lowest” and “Highest”
but no one knows what that means.
|
|
Author: | SylvainLS | Posted: | Mar 19, 2018 20:59 | Subject: | Re: Save Offsite Paypal! | Viewed: | 42 times | Topic: | Suggestions | |
| In Suggestions, RecycledBrick writes:
| | What you missed is that you already agreed for BrickLink to:
— look into your PP transactions
— block payments and decide refunds.
|
I didn't miss those. How is Bricklink going access my PayPal account? It
doesn't matter what agreement is made, how do they get into it? I am just
wondering.
|
I answered your last paragraph: “I haven't noticed anything different or
what is so bad about
each either. If there is something different or bad, what am I missing?”
You can’t broaden up a question then narrow it down again when the answer doesn’t
suit you.
| | ), you’ll see automatic fees is strongly considered.
And I think you already agreed to that
|
It would probably be better since I never use the My BL page for anything, I
don't see the reminder to pay the fees for Bricklink. It might be easier
this way but then it would be something that Bricklink would have to set up with
PayPal and I don't see that happening anytime soon. You also can disconnect
your PayPal account at anytime so no one is forced into this.
|
Sellers are forced into it when they can’t choose any other payment method than
PayPal Marketplaces.
Buyers are forced into it when they can’t choose any offsite payment method.
|
|
Author: | SylvainLS | Posted: | Mar 19, 2018 20:09 | Subject: | Re: Save Offsite Paypal! | Viewed: | 43 times | Topic: | Suggestions | |
| In Suggestions, RecycledBrick writes:
| […]
Since I have offered Onsite payments since it started and Marketplaces since
it was started, I haven't noticed anything different or what is so bad about
each either. If there is something different or bad, what am I missing?
|
What you missed is that you already agreed for BrickLink to:
— look into your PP transactions
— block payments and decide refunds.
BL didn’t make any statement about their intentions. (And, anyway, intentions
can change.)
BL didn’t either explain what will happen to those who refuse to agree to Marketplaces.
And if you watch Big B Bricks’ interview of Jaclyn ( https://www.bricklink.com/message.asp?ID=1081977
), you’ll see automatic fees is strongly considered.
And I think you already agreed to that.
|
|
Author: | SylvainLS | Posted: | Mar 18, 2018 16:18 | Subject: | Re: Have all members pay BL $1 to buy and/or sell | Viewed: | 104 times | Topic: | Suggestions | |
| In Suggestions, matejo writes:
| Mentioned in other posts, I am submitting this as a separate suggestion.
The goal of the $1 payment is to preclude new members from making false orders
and thereby avoid time wasted on pulling order items, attaining packing supplies,
calculating shipping, etc.
Perhaps there is also a benefit with regard to new sellers. Not sure.
I recognize there will be process, payment, and accounting challenges for BrickLink
administrators, along with maybe an undesired initial action to become a member,
however this proposal would screen out false buyers, and benefit the integrity
and positive experiences of the entire new member, buyer, and seller community
-- which for my part is a key reason I'm here.
|
So, one $5 minifig will cost $7 + shipping, with $2 + 3% to BL (= ~30% fee).
Yeah, I can see that going very well indeed… not!
|
|
Author: | SylvainLS | Posted: | Mar 16, 2018 11:30 | Subject: | Re: Minibuilds | Viewed: | 39 times | Topic: | Suggestions | |
| In Suggestions, TallyToyBricks writes:
| I'm not sure how you would handle selling new minibuilds with stickers and
instructions.
Do you cut the sticker sheets? Do you send the appropriate building pages from
the manual?
What would the buyer expect?
|
AFAICT, generally, each minibuild has its own instruction booklet.
Sticker sheets are more of a problem :/
|
|
Author: | SylvainLS | Posted: | Mar 7, 2018 20:24 | Subject: | Re: Separate professional and private sellers | Viewed: | 38 times | Topic: | Suggestions | |
| In Suggestions, Speg writes:
| […]
| If you want to stick with LEGO (whereas MarieA was more general), what about
a motor that fails after a few weeks?
The seller sold it as new. The warranty should be 2 years.
|
Isn't that warranty through Lego and not the seller?
|
Legally, it’s through the seller.
But usually, sellers tend to redirect you to the manufacturer. And some manufacturers
(as TLG) prefer handling it themselves.
But what if the motor is an old model not produced for a long time? What do
you think TLG will do? They will tell you to go back to the seller.
|
|
Author: | SylvainLS | Posted: | Mar 7, 2018 15:38 | Subject: | Re: Separate professional and private sellers | Viewed: | 39 times | Topic: | Suggestions | |
| In Suggestions, StarBrick writes:
| | I know of an ex-car dealer who was bored with his job and quit but continued
to buy and sell used cars as an individual for a couple of years (then he was
re-hired as a “seller extraordinary” because he was that good). He knew the
rules pretty well and limited himself to less than (I think it’s) ten cars a
year. Buy a used car, keep it a few weeks, sell the car. He managed to make
a hefty profit. All legal, and not as a pro.
|
Is that a business? Or someone who loves to have another car every few weeks
and makes money along the way?
Has he become a business by doing so?
|
No. It was someone who was a car salesman, who wanted to change job because
he was bored, but who continued to buy and sell after quitting because it’s what
he is. Yes, he loves to have a different car every few weeks, but he also loves
buying and selling and he made good money along the way.
No, that way of life didn’t become a business. His former employer hired him
back, with a new position, part time so that he could do other things too, because
he was their best salesman and he accepted because, eventually, he realised it
was what he was.
As a car salesman, you can’t buy and sell so many cars as a person.
| The main issue here is how to differentiate between the seller, selling of his
or hers overstock with the intention to get rid of it and the seller purchasing
and reselling parts/sets etc with the intention to generate profit with it
|
Every text and answer (from the fiscal administration’s lowest rank to their
minister) I know about say it’s a case by case decision.
They guy I talked about did that only a couple of years, so he didn’t run afoul
of the fiscal administration. I’m sure he would have ended in trouble if he
had continued a bit longer: cars are exceptions to a lot of thresholds and taxes,
so there was no problems about the income, but the number of “cartes grises”
(vehicle registrations) is limited for an individual and his intent and status
as non-business might have been questionned if the vehicle registration services
had decided to talk to the fiscal administration.
|
|
Author: | SylvainLS | Posted: | Mar 7, 2018 13:21 | Subject: | Re: Separate professional and private sellers | Viewed: | 41 times | Topic: | Suggestions | |
| In Suggestions, Speg writes:
| […]
| | | If an obvious business declares themselves a personal seller, this would set
alarm bells ringing. If they're not declaring their trade, what chance they'll
allow you your legal consumer rights if something goes wrong?
|
That's what PayPal is for.
|
What if what you bought became faulty and the seller didn't want to know?
PayPal wouldn't necessarily refund in such a case, yet consumer law (in the
EU at least) would hold the retailer responsible for putting it right. PayPal
makes invoking some rights easier, but not all.
|
If the Lego becomes faulty? I'm unsure exactly how you mean.
|
If you want to stick with LEGO (whereas MarieA was more general), what about
a motor that fails after a few weeks?
The seller sold it as new. The warranty should be 2 years.
|
|
Author: | SylvainLS | Posted: | Mar 7, 2018 10:58 | Subject: | Re: Separate professional and private sellers | Viewed: | 49 times | Topic: | Suggestions | |
| In Suggestions, yorbrick writes:
| […]
Yes, and that is the problem if there is a strict numerical definition of a business.
If BL allowed a seller to make two transactions a week, up to 100 per year, then
a number of stores would make sure they stay just under those limits. Either
by closing each week after two sales, or having a high minimum that they reduce
through the week until they get their two orders, then a massive high minimum
order after two, and so on.
|
But the suggestion is just about a “I’m a hobbyist/business” declaration, not
about fixing limits.
I haven’t voted on it yet. The advantages aren’t obvious. I can only see two:
1. Someone saying “I’m a hobbyist” while selling New, with hundreds of FB, is
fishy. But we can already spot them in other ways.
2. Someone saying “I’m a business” while having only a few FB might gain a tiny
bit of trust.
The problems seem more easy to see, mainly steming from the definitions being
unclear and not universal.
|
|
Author: | SylvainLS | Posted: | Mar 7, 2018 09:50 | Subject: | Re: Separate professional and private sellers | Viewed: | 43 times | Topic: | Suggestions | |
| In Suggestions, yorbrick writes:
| […]
Maybe it varies from country to country, but it is a business if they bought
those parts with the intention of selling them. Even if they bought them for
4 cents and make no profit on each sale, or 10 cents and make a loss each time.
Similarly a person selling a €500 set could perfectly legitimately not be a business.
If they bought a set and it has been part of their collection and they decide
they no longer want it and sell it, then they are not trading as a business.
The value doesn't matter when it comes to whether they are a business.
|
Yes.
I know of an ex-car dealer who was bored with his job and quit but continued
to buy and sell used cars as an individual for a couple of years (then he was
re-hired as a “seller extraordinary” because he was that good). He knew the
rules pretty well and limited himself to less than (I think it’s) ten cars a
year. Buy a used car, keep it a few weeks, sell the car. He managed to make
a hefty profit. All legal, and not as a pro.
There also is the Airbnb model (which is greatly abused): the law allows you
to rent your home 120 days a year. It’s not question of profit or value. The
time limit says when your “home” isn’t a home anymore but a hotel room.
|
|
Author: | SylvainLS | Posted: | Mar 7, 2018 09:35 | Subject: | Re: Separate professional and private sellers | Viewed: | 54 times | Topic: | Suggestions | |
| In Suggestions, yorbrick writes:
| In Suggestions, SylvainLS writes:
| In Suggestions, Teup writes:
| […]
That's feedback and it's unrelated There are businesses with low feedback
scores and hobbyists with high scores. It doesn't tell you anything about
the legal form of the transaction.
|
Nonsense. A “hobbyist” with several sales a week isn’t a hobbyist, whether they
are incorporated / registred / whatever or not.
|
I'm not so sure. Someone that decides to get rid of their collection may
pick up multiple sales in a week, and go on for a few months like that.
|
Let me rephrase: Saying “feedback is unrelated” is a nonsense because high feedback
is a strong clue of the seller being a professional.
Yes, you can always contrive examples for which a general rule doesn’t apply
but this rule applies and is used by the IRS/HMRS/DGFIP/… when they decide to
go after you.
| Whereas
a business may get few sales per week. It may not be a very good business, but
still a business if they buy to sell for profit.
|
Note that I didn’t say a low feedback/revenue indicates the seller is a hobbyist.
Indeed, in another thread, I told a seller their not making money was irrelevant
to their professional status.
Some people (mainly from Common Law countries) tend to argue things aren’t “legal”
or “illegal” until they have been judged as such in a court.
For some people, the “hobbyist status” is a bit like that: as the IRS/HMRS/DGFIP/…
hasn’t yet pounced on them or their fellows, they strongly believe the status
exists and applies to them.
As MarieA says, a seller claiming to be hobbyist while they clearly are not is
a strong clue they won’t follow other rules, like consumer laws.
And yes, I’m pretty sure there are actual hobbyists who have a better customer
services than big professional sellers but Pro vs. Hobby is a bit like New vs.
Used: it’s not a question of aspect / experience, it’s a question of status.
|
|
Author: | SylvainLS | Posted: | Mar 7, 2018 08:41 | Subject: | Re: Separate professional and private sellers | Viewed: | 69 times | Topic: | Suggestions | |
| In Suggestions, Teup writes:
| […]
That's feedback and it's unrelated There are businesses with low feedback
scores and hobbyists with high scores. It doesn't tell you anything about
the legal form of the transaction.
|
Nonsense. A “hobbyist” with several sales a week isn’t a hobbyist, whether they
are incorporated / registred / whatever or not.
|
|
Author: | SylvainLS | Posted: | Mar 5, 2018 17:07 | Subject: | Re: Search Locally | Viewed: | 25 times | Topic: | Suggestions | |
| In Suggestions, Speg writes:
| […]
Other than actually picking the item up from someone in person, even same state
shipping isn't much faster than a state that's 1000 miles away. For example:
if I wanted to mail my immediate neighbor a letter, the mail person has to pick
up the letter, bring it back to the mail hub, sorting facility, then back out
for delivery the next day(s).
|
I’ve had same-town mail take a few days while other-corner-of-France mail took
one day
While English’s “going postal” seems recent, the use of “timbré” (stamped) for
deranged/nuts is quite old in French (before 1570)
|
|
Author: | SylvainLS | Posted: | Mar 5, 2018 09:44 | Subject: | Re: wanted list - remove items when received | Viewed: | 36 times | Topic: | Suggestions | |
| In Suggestions, NicoBuma writes:
| Whenever I order things that are on my wanted list and the order arrives and
is checked and completed, it would be nice if the items I just got shipped are
removed from my wanted list, so next time I go shopping it only lists the parts
I still need from my wanted list and not the ones I received in the last (few)
order(s).
Would this be possible for bricklink admins to make changes to the ordering system,
so this can be done automatically? (maybe like a checkbox you can set)
Are there other people who would also like this feature or how do you guys
do this? Do you go through all your wanted lists and delete the items after you've
received your orders, or do you forget to do this and with another order you
order (some) parts double ? (like I have done many times, after which of course
I go through all my wanted lists and remove those parts, to not make the same
mistake again)
|
1. You can already do that:
a. within the Wanted List with “Apply Order,”
b. just after checkout “search items in my wanted lists,”
c. from the Orders page (a scroll-like icon whose presence depends on a setting
I can’t find)
2. How would BL know if and when you’ve received all the items in the order?
|
|
Author: | SylvainLS | Posted: | Mar 2, 2018 09:22 | Subject: | Inventory Change Request for Set 60072-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 44567b Blue Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Bottom Groove (Alternate) (match ID 1)
* Change 1 Part Blue 44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side {match ID 0 to 1}
Comments from Submitter:
Sealed set.
|
|
Author: | SylvainLS | Posted: | Mar 2, 2018 09:19 | Subject: | Inventory Change Request for Set 60034-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 44567b Black Hinge Plate 1 x 2 Locking with 1 Finger on Side, with Bottom Groove (Alternate) (match ID 3)
* Change 4 Part Black 44567 Hinge Plate 1 x 2 Locking with 1 Finger on Side {match ID 0 to 3}
Comments from Submitter:
Sealed set. Actually got 3 x 44567b + 1 x 44567.
(Bought beginning of 2015.)
|
|
Author: | SylvainLS | Posted: | Mar 1, 2018 14:36 | Subject: | Re: Getting Frustrated Now With Bricklink | Viewed: | 108 times | Topic: | Problem | |
| In Problem, bagelboybugle writes:
| In Problem, legoman77 writes:
|
Then why not hire someone that is capable of dealing with older coding or whatever
it is called?
|
I seem to recall it was mentioned long before the current team joined us that
it is not so much the coding thats the issue, its that there isnt a map of the
codes architecture (sorry I cant remember the proper technical words) which makes
it hard, even for experts to unpick when redesigning because its hard to know
which bit of code does what? or something like that.
|
A web application has multiple entry points (= pages), so it’s a bit more loose
and confusing than an application (which generally has only one main executable).
But frankly, starting from the database, the code, and actual use cases (just
asking users what they do and how they do it), you can reverse engineer and document
any system.
You just need someone with the proper skills.
From that point, YOU DON’T PATCH the mess, you rewrite it cleanly. (You might
have a team who patches the blurb while you redesign the system, but you don’t
make the new version from the previous one’s spaghetti code, especially not if
you’re still in the “what’s that stuff?” phase.)
Think about an old stone bridge, with a few houses haphazardly built on its top,
that you want to upgrade. You don’t replace every stone arch with a new steel
one one at a time (even though with computers, you can do that magically and
instantaneously). You build a brand new bridge, with brand new, well structured
houses, with all the modern stuff, a bit farther, and when it’s ready, you move
people and trafic to it, just before blowing up the old one.
People have trouble abandoning the old bridge’s stones / the old code. They
don’t understand the stones aren’t really important, it’s the bridge that is.
The knowledge, the processes, the database, all are important, not the code.
(Yes, I’ve done this a few times.)
|
|
Author: | SylvainLS | Posted: | Feb 28, 2018 21:08 | Subject: | Re: Getting Frustrated Now With Bricklink | Viewed: | 72 times | Topic: | General | |
| In General, crazylegoman writes:
| In General, SylvainLS writes:
| In General, crazylegoman writes:
| In Problem, CheshireBricKs writes:
| Your ability to inventory used Lego is appalling.
|
I have no idea what you mean by that. The inventories in the catalog are submitted
by users, and they're generally inventoried using new sets, not used.
|
Replace “to inventory” with “to put in your store’s inventory.”
|
That definitely changes the meaning, but it still doesn't make sense. Has
there been some change in the way parts are added to a store when they are used?
|
With New, you can easily part out sets into your inventory. With Used, when
you don’t know which sets the parts are from (and whether they are all there),
it’s more work.
I understand a lot of people use BrickStock (or similar) but sellers tools are
scarce on BL.
(And tote that I’m a buyer only )
|
|
Author: | SylvainLS | Posted: | Feb 28, 2018 20:03 | Subject: | Re: Getting Frustrated Now With Bricklink | Viewed: | 82 times | Topic: | General | |
| In General, crazylegoman writes:
| In Problem, CheshireBricKs writes:
| Your ability to inventory used Lego is appalling.
|
I have no idea what you mean by that. The inventories in the catalog are submitted
by users, and they're generally inventoried using new sets, not used.
|
Replace “to inventory” with “to put in your store’s inventory.”
|
|
Author: | SylvainLS | Posted: | Feb 24, 2018 19:24 | Subject: | Re: Inventory Change Request for Set 7735-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
| In Inventories Requests, CrazyChris writes:
| In Inventories Requests, Admin_Russell writes:
| Before submitting volleys of requests, it is better to contact an admin to make
sure you are on the same wavelength.
|
That's funny, because that's what we already did sending the big Excel
file... but there was NO response. Later on, you told us that we should use the
ICR form.
So what method do you prefer? And what is the reason for your lack of communication?
I really admire Reza due to his power fo endurance - many other people (incl.
me) would have resigned. It is very disappointing.
|
So, for you, it’s either flooding the admins with a big impractical Excel file
or flooding them with inventory requests?
Look at the threads a few weeks ago about re-categorizing Ninjago (main one https://www.bricklink.com/message.asp?ID=1069910
, but there were a few messages before).
I believe that’s the kind of contact, discussion, and organization Russel would
prefer.
|
|
Author: | SylvainLS | Posted: | Feb 19, 2018 07:00 | Subject: | Re: Inventory Change Request for Set 6067-1 | Viewed: | 88 times | Topic: | Inventories Requests | |
| In Inventories Requests, Thea writes:
You have a good memory
But be reassured, I eventually decided against contacting elias3: I don’t need
to be tempted with envy
|
|
Author: | SylvainLS | Posted: | Feb 19, 2018 06:51 | Subject: | Re: Inventory Change Request for Set 7750-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| […]
1) Is there any set in which 3062a and 3062b were simultaneously used?
|
I have no solid proof but according to my old parts and what sets they are coming
from, I’d say yes.
| 2) There is a set from 1981 coming with 3062a, and a set from 1979 coming with
3062b! The early variant was used 2 years after its replacement was released!
Do you know any other part like this?
|
See discussion about 3794a/b/15573: https://www.bricklink.com/message.asp?ID=1075720
My Tower Bridge with seals 45S6 (hence from the 45th week of 2016) had Tan 3794a
mixed with 3794b (and all the other jumpers were 3794b).
|
|
Author: | SylvainLS | Posted: | Feb 18, 2018 07:48 | Subject: | Re: Inventory Change Request for Set 6067-1 | Viewed: | 31 times | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| […]
Comments from Submitter:
own collection
|
From all the change requests you make with that comment, we will soon know all
the sets in your collection
|
Author: | SylvainLS | Posted: | Feb 15, 2018 17:12 | Subject: | Re: Inventory Change Request for Set 7727-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| No wprries.
Admin will chech the requests anyway,
|
The poster can also simply cancel the request.
| I should only share and comment what I know. […]
|
Shouldn’t we all?
But it would soon be boring
|
|
Author: | SylvainLS | Posted: | Feb 15, 2018 09:57 | Subject: | Re: Inventory Change Request for Set 6842-1 | Viewed: | 27 times | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| In Inventories Requests, SezaR writes:
| Yes that helps too.
And do you remember the yellow cones 3943a and 3943b for 7730?
Recall that I observed all 7730 in Belgium and Netherland came with 3943a.
I saw one sola in Netherland few days agon with 3943b! I asked the seller if
he bought it from Germany. He said "yes, I bought it from west Germany". I don't
know what he meant exactly by that, either West of Germany or West Germany. Either
cases, from Germany!
|
We had in Europe after WW2 Germany split (in 1949) in West-Germany and East-Germany...
till 1990.
|
I think SezaR was saying it wasn’t clear if the seller was talking:
1. about the Federal Repuplic of Germany (“West Germany”), as opposed to the
German Democratic Republic (“East Germany“) from 1949 to 1990,
2. or of a more precise location “West of the FDR,” as in Western Germany, as
opposed to Southern, Northern, Eastern, or Central Germany,
3. or even if they meant “in post-1990 FDR but not in one of the former East
Germany states.”
It partly depends on when they bought it.
|
|
Author: | SylvainLS | Posted: | Feb 13, 2018 19:02 | Subject: | Re: Inventory Change Request for Set 70627-1 | Viewed: | 10 times | Topic: | Inventories Requests | |
| In Inventories Requests, fab_track writes:
| Please make changes to the following inventory:
* Add 2 Part 4865b Dark Bluish Gray Panel 1 x 2 x 1 with Rounded Corners
Comments from Submitter:
Not in listed inv but is part of the set
|
They are, as Alternates for 4865.
|
|
Author: | SylvainLS | Posted: | Feb 12, 2018 16:57 | Subject: | Re: Inventory Change Request for Set 6890-1 | Viewed: | 11 times | Topic: | Inventories Requests | |
| In Inventories Requests, cipeciop writes:
| Please make changes to the following inventory:
* Change 1 Part Black {3839a Plate, Modified 1 x 2 with Handles - Round Ends, Mid Attachment to 3839b Plate, Modified 1 x 2 with Handles - Flat Ends, Low Attachment}
* Change 1 Part White {3839a Plate, Modified 1 x 2 with Handles - Round Ends, Mid Attachment to 3839b Plate, Modified 1 x 2 with Handles - Flat Ends, Low Attachment}
Comments from Submitter:
I've had it since 1982 in Italy.
Also, it's clear from its intructions.
|
These variants are already in the inventory, as alternates (groups 2 and 3).
|
|
Author: | SylvainLS | Posted: | Feb 11, 2018 07:32 | Subject: | Re: Damage Tick Box | Viewed: | 36 times | Topic: | Suggestions | |
| In Suggestions, CanadaFirst writes:
| […]
| There have been several discussions (and suggestions) on that subject. They
are generally ended after a few “one’s part ‘with (heavy) playwear’ is another’s
‘damaged’ part and again another’s ‘not to be sold ever’ part” comments.
|
Like there are rules for new and used parts that are clear and universal, they
would be rules for damaged. I suggest the following:
'Damaged parts are part that have either heavy scratches, discoloration,
toothmarks or damage to the part.'
Concerning the fact that some parts that are used for some sellers would be considered
as damaged for others, that is the beauty of difference between the stores and
what makes the feedback so helpful.
|
What I meant was more like:
1. Did you look at the other suggestions and discussions?
2. Why do you think these other suggestions weren’t implemented?
3. Why do you think yours would be?
4. Isn’t it wasteful to have multiple identical suggestions? (Spreading the
votes, forgetting the past….)
|
|
Author: | SylvainLS | Posted: | Feb 10, 2018 22:16 | Subject: | Re: Damage Tick Box | Viewed: | 25 times | Topic: | Suggestions | |
| In Suggestions, CanadaFirst writes:
| Yes of course we do comment our parts (go see our store) but when customers pass
through a wanted list and ask to see parts available from a store the damaged
parts are not identified before you procees to cart and payment and you have
to verify every items one by one. When you search for a set, you can request
to avoid incomplete sets. What we suggest is the same system that will give customers
the opportunity to skip the parts listed as damaged. In the same time, the damaged
parts will stop having impact on average price of good used parts. Incomplete
sets doesn't affect the average price of sets.
|
There have been several discussions (and suggestions) on that subject. They
are generally ended after a few “one’s part ‘with (heavy) playwear’ is another’s
‘damaged’ part and again another’s ‘not to be sold ever’ part” comments.
|
|
Author: | SylvainLS | Posted: | Feb 6, 2018 07:14 | Subject: | Re: Inventory Change Request for Set 753-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, yorbrick writes:
| | multi tasking with benzine research and lego , thanks for the benzine update
|
Don't confuse benzene and benzine.
|
Ben zut! (Shucks!)
|
Author: | SylvainLS | Posted: | Feb 5, 2018 08:04 | Subject: | Re: Inventory Change Request for Set 1591-2 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
Pictures of criminally cute puppies should be forbidden!
|
Author: | SylvainLS | Posted: | Feb 5, 2018 08:03 | Subject: | Re: Inventory Change Request for Set 40290-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, SylvainLS writes:
| 24 were filed as “approved,” and this one just “disappeared.”
|
Shhh, we must never speak of the disappeared. In fact, that request never existed
and you would do well to put it from your mind altogether.
|
Ok, mum’s the word
|
|
Author: | SylvainLS | Posted: | Feb 5, 2018 07:06 | Subject: | Re: Inventory Change Request for Set 40290-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, Admin_Russell writes:
| | […]
Absolutely. I got caught in the repetition
The change request having been approved, do I file a new one?
|
No, that one didn't get approved.
|
I meant I understood “pending” changes could be edited but the 25 changes were
in the same message/batch, 24 were filed as “approved,” and this one just “disappeared.”
| But I have fixed the inventory now.
|
Thanks!
|
|
Author: | SylvainLS | Posted: | Feb 4, 2018 07:17 | Subject: | Re: Inventory Change Request for Set 40290-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, Admin_Russell writes:
| In Inventories Requests, SylvainLS writes:
| Please make changes to the following inventory:
|
-snip-
| * Add 1 Part 4073 Red Plate, Round 1 x 1 Straight Side (Extra)
|
Should this not be Trans-Red?
|
Absolutely. I got caught in the repetition
The change request having been approved, do I file a new one?
| | Comments from Submitter:
From sealed set.
(One expected extra not present: 54200 Trans-Yellow )
|
Variability is an important characteristic of the "Extra Items" section. In fact,
it is likely the reason why this section was developed.
|
But there still are some expectations ( https://www.bricklink.com/message.asp?ID=1060309
) and sometime errors from the part of the submitter (see above ).
|
|
Author: | SylvainLS | Posted: | Feb 3, 2018 16:37 | Subject: | Inventory Change Request for Set 40290-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 48729b Black Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on Side (Extra)
* Add 1 Part 87994 Light Bluish Gray Bar 3L (Bar Arrow) (Extra)
* Add 1 Part 11253 Black Minifig, Footgear Roller Skate (Extra)
* Add 1 Part 3024 Black Plate 1 x 1 (Extra)
* Add 1 Part 3024 Light Bluish Gray Plate 1 x 1 (Extra)
* Add 1 Part 3024 White Plate 1 x 1 (Extra)
* Add 1 Part 3024 Red Plate 1 x 1 (Extra)
* Add 1 Part 3024 Yellow Plate 1 x 1 (Extra)
* Add 1 Part 3024 Trans-Light Blue Plate 1 x 1 (Extra)
* Add 1 Part 4073 Black Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 White Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Yellow Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Light Bluish Gray Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Green Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 85861 Light Bluish Gray Plate, Round 1 x 1 with Open Stud (Extra)
* Add 1 Part 54200 Yellow Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Light Bluish Gray Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Trans-Light Blue Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 4274 Light Bluish Gray Technic, Pin 1/2 (Extra)
* Add 1 Part 3070b Black Tile 1 x 1 with Groove (Extra)
* Add 1 Part 3070b Yellow Tile 1 x 1 with Groove (Extra)
* Add 1 Part 98138 Red Tile, Round 1 x 1 (Extra)
* Add 1 Part 98138 Light Bluish Gray Tile, Round 1 x 1 (Extra)
Comments from Submitter:
From sealed set.
(One expected extra not present: 54200 Trans-Yellow )
|
|
Author: | SylvainLS | Posted: | Feb 1, 2018 14:24 | Subject: | Re: Inventory Change Request for Set 70904-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| […]
However, for this set I made an extensive check of set reviews and unboxing/speed
build videos and everything I looked at showed that the brick with 4 side pin
holes was the one included in this set.
The attached photos show seven different sources for this, although I checked
more.
|
On the other hand, without the holes, the fist wouldn’t attach.
The fist wouldn’t fit, you must approve.
Darn, it doesn’t rhyme.
|
|
Author: | SylvainLS | Posted: | Jan 25, 2018 10:20 | Subject: | Re: The utter powerlessness of buyers | Viewed: | 41 times | Topic: | Suggestions | |
| In Suggestions, Cosy writes:
| […]
I would probably support a more realistic % based on 1yr last sales. 6mo would
be good for catching erratic declines more quickly (which seems to sometimes
be a seller flameout pattern), but maybe 6mo would feel a bit harsh to lower
volume sellers.
|
We already have that https://store.bricklink.com/Cosy?p=Cosy#/feedback to quickly
see the last 6 months behaviour.
| undetected, how about suggesting a 1yr last sales seller feedback calculation,
instead of what I think is lifetime.
|
If it’s about removing data (that’s what it will be if you only take on year
of FB), it’s NO.
If it’s about adding yet another confusing number, it’s NO.
|
|
Author: | SylvainLS | Posted: | Jan 25, 2018 08:12 | Subject: | Re: The utter powerlessness of buyers | Viewed: | 76 times | Topic: | Suggestions | |
| In Suggestions, undetected writes:
| […]
I think the problem I have is that there is another number that's shown almost
everywhere, which is just a feedback count. I'm not sure what purpose that
serves. It could be 500 negative responses, but boy, 500, that's a lot!
|
No. If it were 500 negative FBs, it would be “-500.”
Negative FBs ARE negative.
But the problem is almost the same, “500” could be 1000 positive − 500 negative.
|
|
Author: | SylvainLS | Posted: | Jan 23, 2018 15:52 | Subject: | Re: Politics, LEGO and Bricklink | Viewed: | 68 times | Topic: | Suggestions | |
| In Suggestions, bagelboybugle writes:
| […]
It did indeed grab my attention, but as long as conversation does not delve into
the actual politics of the situation there is no reason to remove it. I have
moved the thread to suggestions, although contacting the help desk get a quicker
resolution.
|
Yes, that’s what I meant: it grabs the attention of moderators, not of help desk
or other, less adventurous, forumers
|
|
Author: | SylvainLS | Posted: | Jan 23, 2018 15:14 | Subject: | Re: Politics, LEGO and Bricklink | Viewed: | 98 times | Topic: | Suggestions | |
| In General, laurenyves writes:
| I just had an enquiry from somebody in Cyprus asking me why I would not ship
to him, though Cyprus is in the EU and I apply shipping rates for ALL EU countries.
Why was Cyprus not included in my list ? Cyprus it seems is included in the Middle
East region for Bricklink and hence I did not include Cyprus. This needs to be
corrected immediately.
As for the case of the rest of the island, I cannot comment wheter the UN allows
or not to ship LEGO.
Am I correct to put that forward ?
|
Yes.
Even if the status of the North of the island might be problematic (though the
state is only recognised by one country (Turkey)), there’re absolutely no controversies
on the fact the Republic of Cyprus is in EU.
Though, I’m not sure a forum post (with “politics” in the title) will help.
Did you file a bug report / contact Help Desk?
|
|
Author: | SylvainLS | Posted: | Jan 22, 2018 10:06 | Subject: | Re: AJAX error while searching for stores | Viewed: | 71 times | Topic: | General | |
| In General, xenocryst writes:
| […]
| The Classic Wanted View By Shop still works.
|
You keep saying this in all the threads, and maybe I’m just dense, but Classic
is so inscrutable to me that it may as well also be broken.
|
(Just in case: You get Classic “By Shop” by clicking “Classic” then “By Shop”
on the menu bar in the WL page.)
It shows the list of stores ordered by the number of lots or items they have.
That’s exactly what you get on the (new) “Buy” page just after loading it (when
it works ).
What Classic doesn’t have:
1. no Auto-Select, no Easy-Buy,
2. no way to select items to look for, it’s whole WLs or nothing,
3. no way to quickly see exactly what items each store has without opening the
store,
4. no way to select a store / preselect items to buy (thus removing the items
from the list of items to look for and updating the list of stores),
5. and undoubtedly other things I don’t remember right now.
Well, at least, you still have a list of stores with items in your WL….
|
|
Author: | SylvainLS | Posted: | Jan 20, 2018 14:58 | Subject: | Re: Sellers who smoke should let buyers know | Viewed: | 66 times | Topic: | Suggestions | |
| In Suggestions, Teup writes:
| In Suggestions, SylvainLS writes:
| In Suggestions, Brickitty writes:
| […]
Especially sellers who continually lie about it for years *cough* Brick-N-Brac
*cough*
|
Hey, you should really stop smoking: you cough so much, you’re even coughing
while writing!
|
He's not smoking, he's ordering at Brick-N-Brac
|
Seems as bad for your health
|
Author: | SylvainLS | Posted: | Jan 20, 2018 13:00 | Subject: | Re: Sellers who smoke should let buyers know | Viewed: | 57 times | Topic: | Suggestions | |
| In Suggestions, Brickitty writes:
| […]
Especially sellers who continually lie about it for years *cough* Brick-N-Brac
*cough*
|
Hey, you should really stop smoking: you cough so much, you’re even coughing
while writing!
|
Author: | SylvainLS | Posted: | Jan 20, 2018 08:25 | Subject: | Re: Sellers who smoke should let buyers know | Viewed: | 37 times | Topic: | Suggestions | |
| In Suggestions, FergH0va writes:
| As a smoker, I agree.
I don't smoke inside my home (That's where I keep my stuff!). I can't
stand the smell of smoke on my things, if you can believe it.
|
Are you sure you still have a sense of smell?
I’ve known smokers who allways smoked outside, drove with open windows even in
deep winter, etc., their homes and cars (and selves) still smelled like old ashtrays.
|
|
Author: | SylvainLS | Posted: | Jan 18, 2018 17:42 | Subject: | Re: Superlot Pricing Suggestion | Viewed: | 28 times | Topic: | Suggestions | |
| If I may add an argument for that suggestion:
It’s not price fixing or BL setting the prices for the items in the superlot
because you can’t buy the items in the superlot separately at that price.
Equivalent items can be listed separetely at any price. (“Equivalent,” not “the
same,” else you’d be listing and risk selling the same objects twice.)
|
|
Author: | SylvainLS | Posted: | Jan 11, 2018 15:44 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 39 times | Topic: | Suggestions | |
| In Suggestions, Teup writes:
| Long story short after all this SEPA, IBAN, Euro zone, Europe etc discussion:
Simply allow sellers to set up zones for payment methods the same way they set
up zones for shipping methods […]
|
As already said, it’s not a zone problem, it’s a currency problem.
If you (as a seller) make a list of EUR using countries, you’ll block UK (for
instance) buyers with a bank account in Euro who wouldn’t have any problem with
SEPA bank transfers.
On the other hand, if you make a list of SEPA countries (so including UK), you’ll
bother buyers (like yorbrick) who can’t or don’t want to make bank transfers
in EUR.
What you want is a “buyer can/wish to pay in EUR inside SEPA” which is different
from “buyer is in a SEPA country.”
Anyway I don’t very much like the “I want to block buyers who could pay the way
I want but won’t” attitude, I’d rather see a “I give perks to buyers who pay
the way I prefer.” But I guess it’s because I’m a buyer
|
|
Author: | SylvainLS | Posted: | Jan 11, 2018 13:06 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 29 times | Topic: | Suggestions | |
| In Suggestions, yorbrick writes:
| In Suggestions, SylvainLS writes:
| In Suggestions, yorbrick writes:
| […]
What do you mean by EU? There are (currently) nine EU countries that don't
use the Euro and bank transfers are not so easy as for Eurozone countries. So
any such option needs to be clear as to which countries are being referred to
- EU countries or Eurozone countries.
|
SEPA (Single Euro Payment Area)?
Which is where SEPA rules¹ apply.
(¹ Mainly, inside SEPA transfers should follow the same rules as a local one.)
|
Yes, that would be fine. When sellers say EU countries must pay via bank transfer,
I often leave the store as UK-EU transfers can be more costly than by PayPal
by the time the rate has been factored in. Especially if I already have EU funds
in PayPal.
|
Er, you know UK is part of SEPA, don’t you?
Your problem is with the “Euro Payment” part.
Region/area/list of countries isn’t the only criterion. Currency is important
too but BL doesn’t seem to take that into account (I’ve never seen a store filtering
that way).
|
|
Author: | SylvainLS | Posted: | Jan 11, 2018 08:04 | Subject: | Re: Add option to Exclude Paypal for EU | Viewed: | 42 times | Topic: | Suggestions | |
| In Suggestions, yorbrick writes:
| […]
What do you mean by EU? There are (currently) nine EU countries that don't
use the Euro and bank transfers are not so easy as for Eurozone countries. So
any such option needs to be clear as to which countries are being referred to
- EU countries or Eurozone countries.
|
SEPA (Single Euro Payment Area)?
Which is where SEPA rules¹ apply.
(¹ Mainly, inside SEPA transfers should follow the same rules as a local one.)
|
|
Author: | SylvainLS | Posted: | Jan 9, 2018 14:40 | Subject: | Re: Classic Wanted List Unavailable on June 5th | Viewed: | 55 times | Topic: | Suggestions | |
| In Administrative, JohnBeck writes:
| I still use the classic wanted list because the new one doesn't show me a
quick list of stores with the piece prices...is there something I am doing wrong
with the new search feature?
|
Yes, you’re holding it wrong
Showing the stores for each part is an option: click on “More Options” near the
“Search Wanted List” field, then right column “Items for Sale Options,” “Item
for Sale”|“Show.”
Then, don’t forget to “Apply.”
And beware the default sorting on Store Name (duh!).
|
|
Author: | SylvainLS | Posted: | Dec 28, 2017 07:10 | Subject: | Re: "Add Set Inventory to Wanted List" button | Viewed: | 26 times | Topic: | Suggestions | |
| In Suggestions, TheBlockShop writes:
| Instead of clicking on inventory go to the set you are looking for in the catalog,
Where it says add to my wanted list you can add "part out" with the link below.
|
And if you can’t find the link:
https://www.bricklink.com/message.asp?ID=1068615
|
|
Author: | SylvainLS | Posted: | Dec 17, 2017 12:46 | Subject: | Re: Inventory Change Request for Set 10254-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, 1977_mauro writes:
| Please make changes to the following inventory:
* Change 1 Part Red 85489a Train Wheel RC Train, Spoked with Technic Axle Hole and Counterweight, 30 mm diameter (Blind Driver) {Regular to Extra}
Comments from Submitter:
Not required to build the train.
|
This part looks like it was included on a sprue. Is that correct?
|
Not a sprue stricto sensu but always with two other wheels.
See https://www.bricklink.com/message.asp?ID=1055477
|
|
Author: | SylvainLS | Posted: | Dec 16, 2017 15:13 | Subject: | Re: Inventory Change Request for Set 6762-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, SylvainLS writes:
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
| Or maybe I’m reading “similar to” too strongly: the “but has a different number”
seems to imply it’s the only difference.
|
I think the word "similar" is the cause of your confusion. If the relationship
between the two items stated "identical to, but have different item numbers"
then you would have a valid concern about the fact that inventories can be changed
for each set without affecting the other set. However, when identical items
have different item numbers they have one catalog entry with an alternate item
number. […]
|
*Facepalm* Of course, one entry and an alternate item number for identical sets,
and similar just means similar. Sorry for the brain fart.
|
|
Author: | SylvainLS | Posted: | Dec 16, 2017 12:32 | Subject: | Re: Inventory Change Request for Set 6762-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| Please make changes to the following inventory:
* Change 4 Part Light Gray {3684 Slope 75 2 x 2 x 3 - Undetermined Stud Type to 3684a Slope 75 2 x 2 x 3 - Hollow Studs}
Comments from Submitter:
Systematic change for new catalog part.
|
A policy/semantics question about such linked sets.
6762-1 and 6769-1 are linked by a “This Item is similar to, but has a different
number than the following Item(s)” link.
However, as randyf made a separate request for each of them, it appears the inventories
can be changed independently, and can then make the link lie.
It’s a bit troubling.
Or maybe I’m reading “similar to” too strongly: the “but has a different number”
seems to imply it’s the only difference.
|
|
Author: | SylvainLS | Posted: | Dec 15, 2017 20:58 | Subject: | Re: Email notification preferences | Viewed: | 19 times | Topic: | Suggestions | |
| In Suggestions, Nemo20k writes:
| […]
I'm talking about the automated Bricklink system that notifies you when an
item on your wanted list is listed. […]
|
Those are sent by the stores too, when they add parts to their inventory (not
automatically, the seller decides if they sends notifications).
|
|
Author: | SylvainLS | Posted: | Dec 8, 2017 19:42 | Subject: | Re: Bring Back The Classic Look | Viewed: | 31 times | Topic: | Suggestions | |
| In Suggestions, CAGrow writes:
| I see the option for the classic look, but it's not working. The new look
is really difficult for me to manage so I'm thinking it would be nice to
have the classic look back as an option. At least then I can view my Want List
and see everything listed. Now, I have to navigate. That just hinders my shopping
and dampens the shopping experience over-all.
|
Clicking on “Classic” does nothing apparent but moving the “Classic” button
left (and highlighting it in yellow).
You need to click on another action to see the page’s look change.
|
|
Author: | SylvainLS | Posted: | Dec 8, 2017 16:30 | Subject: | Re: Export parts list from Stud.IO | Viewed: | 20 times | Topic: | Suggestions | |
| In Suggestions, Stardust writes:
| Like the subject says, is there an easy way to export a list of parts from a
model in Stud.io into something like Excel? Or even enable copy-pasting between
those two?
|
Never done it myself but there’s a “BrickLink” menu, with “Upload to My Baseplate”
(obviously, you need to log to BrickLink inside Stud.io).
You should then be able to make a Wanted List from your “Baseplate.”
|
|
Author: | SylvainLS | Posted: | Dec 6, 2017 16:31 | Subject: | Re: Open bricklink to brickarms and other brands | Viewed: | 80 times | Topic: | Suggestions | |
| In Suggestions, Zebedeu writes:
| […]
It may well be useless, but at least it shows by numbers the opinion of the more
vocal elements.
|
We already have that in the responses to the announcement.
And, from past experiences, we know BL don’t care.
Besides, unless it’s very well hidden, we can’t even know how many people vote
for or against a suggestion.
|
|
Author: | SylvainLS | Posted: | Dec 6, 2017 16:05 | Subject: | Re: Open bricklink to brickarms and other brands | Viewed: | 84 times | Topic: | Suggestions | |
| In Suggestions, Zebedeu writes:
| Like the tittle says, let's make a vote and show a real number to add to
the long thread of complaints about brickarms.
Since admin seems to only care about numbers, let's show them some of our
own.
|
Useless.
We who follow the forum are just a tiny part of all the BrickLink users and we
certainly aren’t the new users BL wants to attract.
We’re the old farts, the nay sayers, the know-it-alls.
|
|
Author: | SylvainLS | Posted: | Nov 28, 2017 15:49 | Subject: | Re: Force sellers to ship in boxes | Viewed: | 51 times | Topic: | Suggestions | |
| In Suggestions, chetzler writes:
| […]
Of course there should be minimum standards, but I haven't seen any policy
suggestions that are targeted towards basic standards. They are always oddly
specific and tailored to one user's bad experience. […]
|
That’s not odd at all. It seems the way humans often react. Something happens
and they want “something” to be done so that it can’t happen again.
(And some cater to their fears. But that’s another story.)
|
|
Author: | SylvainLS | Posted: | Nov 28, 2017 15:25 | Subject: | Re: Force sellers to ship in boxes | Viewed: | 56 times | Topic: | Suggestions | |
| In Suggestions, MarieA writes:
| […]
Should BL force all business sellers to abide by consumer laws? No. But it is
a requirement of BL that all users abide by local laws, and once it's brought
to their attention that someone isn't doing so, there should be consequences
of that. It's impossible for BL to collate information on local laws and
act as judge and jury, but it's not impossible for them to collate statistics
on how often a member is reported for failing to abide by local laws, and take
action if/when patterns present themselves.
|
Well, considering 1) we (me included) don’t even give neutral FBs where negatives
should be given, and 2), BL doesn’t care when a store has a high percentage of
negatives, I don’t see that having a hint of a thought of a suggestion of being
implemented any time soon.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|