Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | BricksThatStick | Posted: | Jul 16, 2018 18:54 | Subject: | Re: 50 Shades of Gray | Viewed: | 65 times | Topic: | Colors | |
| In Colors, dcarmine writes:
| I found this in my inventory last week. The first is these new brackets. The
brick with clip is normal Dark Bluish Gray, the bracket on the bottom is normal
Light Bluish Gray. The two in the middle, well, ???. I know this happens when
they change colors in the molding machine, I just never saw two with that much
difference before
The second is a slope I found and I can't really explain the speckle. It
is a LEGO part, seems to be mostly Light Bluish Gray. When I looked at it through
a loop, as you can see here, it has small shafts of black. I would expect round
beads, but not shafts.
Does anyone know how the slope got speckled?
Anyone interested in owning them?
Donna
|
Is it a 1x1 slope? Top corners look sharper/more angular than normal - you sure
its not a clone?
|
|
Author: | Teup | Posted: | Jul 16, 2018 18:48 | Subject: | Re: What's the deal about bluish gray? | Viewed: | 63 times | Topic: | Colors | |
| In Colors, LeGoLem writes:
| Thank you guys!
I should have run a search on the Internet. I found this now: http://www.brickpile.com/articles/grey-bluish-gray-stone-grey-or-blay/
In Colors, LeGoLem writes:
| I am looking for gray bricks and part, but anywhere I look people only sell dark
or light bluish gray instead of regular gray parts. Why is that? Where are the
good old light gray parts? Why did regular gray become so rare?
|
|
I had always believed 100% the change was made to save money. That was something
I respected. But now I read this for the first time https://news.lugnet.com/lego/?n=1791
Whoa, was it really that dumb? That's one of the most pathetic things I read
in a long time and I don't even know where to start.. 1. they don't
even save any money on the change?? 2. I don't even believe that since to
me as an artist the pigments actually do look alot cheaper 3. how can you give
such a dramatic change so little thought 4. what does it even mean when someone
says "next time I will listen to you as well as a group of kids before I make
my decision" 4. how can you apologise so pathetically and give absolutely
nothing and not even make the smallest bsh*t gesture of saying you will pay more
attention next time and literally write there will likely be more "mistakes"
5. ...
It would really have been better if they had not written anything at all. IMO
They don't deserve to have apologised.. Glad I never read it at the time
|
|
Author: | LaineeP | Posted: | Jul 16, 2018 18:13 | Subject: | Re: 6246f (Oil Can) Unusual Colour | Viewed: | 39 times | Topic: | Colors | |
| In Colors, Bond writes:
| So I have been going through a small packet of these:
And I come across a colour that I cannot identify.
The left oil can is of a colour that is darker than either old dark grey or dark
bluish grey. Yet it is not black. So what is it?
Apologies if the colours don't come through very well; I took the photo in
bright outdoor light, with the Texas sun at just after high noon. If that isn't
natural light, then anyone's guess on that definition. Background is a sheet
of white foam-board.
Gurus of LEGO colour, I call upon you.
- Bond
|
Light black? seriously, if I would venture a guess it would be a darker version
of DBG. With all the shade variations you just never know.
|
|
Author: | axaday | Posted: | Jul 16, 2018 17:25 | Subject: | Inventory Change Request for Set 6410-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 5 Part 2536b Brown Plant, Tree Palm Trunk - Short Connector, no Axle Hole
* Delete 5 Part 2536 Brown Plant, Tree Palm Trunk - Undetermined Type
|
Author: | DallasBricks | Posted: | Jul 16, 2018 16:12 | Subject: | Re: What's the deal about bluish gray? | Viewed: | 72 times | Topic: | Colors | |
| I'm old. Time is whizzing by. Elvis died in 1997 right?
David
|
Author: | dcarmine | Posted: | Jul 16, 2018 16:06 | Subject: | 50 Shades of Gray | Viewed: | 205 times | Topic: | Colors | Status: | Open | |
| I found this in my inventory last week. The first is these new brackets. The
brick with clip is normal Dark Bluish Gray, the bracket on the bottom is normal
Light Bluish Gray. The two in the middle, well, ???. I know this happens when
they change colors in the molding machine, I just never saw two with that much
difference before
The second is a slope I found and I can't really explain the speckle. It
is a LEGO part, seems to be mostly Light Bluish Gray. When I looked at it through
a loop, as you can see here, it has small shafts of black. I would expect round
beads, but not shafts.
Does anyone know how the slope got speckled?
Anyone interested in owning them?
Donna
|
|
|
Author: | SezaR | Posted: | Jul 16, 2018 15:51 | Subject: | Inventory Change Request for Set 337-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {2 to 1} Part Yellow 3007 Brick 2 x 8
* Change {1 to 2} Part Green 4727 Plant Flower 2 x 2 Leaves - Angular
Comments from Submitter:
http://www.rextechs.net/lego-vintage-set/#comment-1933
|
Author: | leggodtshop | Posted: | Jul 16, 2018 15:12 | Subject: | Re: Another color question of Duplo | Viewed: | 30 times | Topic: | Colors | |
| It looks darker on the photo than it actually is, difficult to say. My guess
is it is regular Orange.
In Colors, randyf writes:
|
|
Author: | Bond | Posted: | Jul 16, 2018 14:10 | Subject: | 6246f (Oil Can) Unusual Colour | Viewed: | 103 times | Topic: | Colors | Status: | Open | |
| So I have been going through a small packet of these:
And I come across a colour that I cannot identify.
The left oil can is of a colour that is darker than either old dark grey or dark
bluish grey. Yet it is not black. So what is it?
Apologies if the colours don't come through very well; I took the photo in
bright outdoor light, with the Texas sun at just after high noon. If that isn't
natural light, then anyone's guess on that definition. Background is a sheet
of white foam-board.
Gurus of LEGO colour, I call upon you.
- Bond
|
|
|
Author: | randyf | Posted: | Jul 16, 2018 10:14 | Subject: | Re: Another color question of Duplo | Viewed: | 31 times | Topic: | Colors | |
| In Colors, patpendlego writes:
| The left is Dark Orange, but what orange is the right one?
Thx
|
The photo makes it look like regular Orange, but I am sure you checked that.
So if it isn't regular Orange, that leaves Earth Orange and Medium Orange.
Earth Orange is the darker of the two, so I would assume it is that one:
https://www.flickr.com/photos/126975831@N07/14774380748/
However, I would check against Medium Orange, also, just to be sure:
https://www.flickr.com/photos/126975831@N07/14817501419/
Cheers,
Randy
|
Author: | SezaR | Posted: | Jul 16, 2018 03:29 | Subject: | Inventory Change Request for Set 6391-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 10 Part Black {3002 Brick 2 x 3 to 3002old Brick 2 x 3 without Cross Supports}
Comments from Submitter:
Does this need any evidence?
|
|
Author: | StormChaser | Posted: | Jul 16, 2018 01:07 | Subject: | Re: Inventory Change Request for Minifig mba001 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, Minifigforlife writes:
| Please make changes to the following inventory:
* Change 1 Part Yellow {3626bpb0121 Minifig, Head Brown Eyebrows, Thin Grin, Black Eyes with White Pupils Pattern - Blocked Open Stud to 3626cp01 Minifig, Head Standard Grin Pattern - Stud Recessed}
Comments from Submitter:
Have a sealed minifig pack with that head plus the instructions show that one.
|
Everything I've found says that although the set box and instructions do
show the figure with the standard grin pattern, the set actually came with the
head as shown in the current inventory.
Since I cannot verify the accuracy of this request, the request was not approved.
For reference I have attached a photo showing how the set appears when the box
is first opened.
|
|
|
Author: | leggodtshop | Posted: | Jul 15, 2018 19:50 | Subject: | Another color question of Duplo | Viewed: | 59 times | Topic: | Colors | Status: | Open | |
| The left is Dark Orange, but what orange is the right one?
Thx
|
|
Author: | slq | Posted: | Jul 15, 2018 19:20 | Subject: | Inventory Change Request for Set 75046-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 64567 Metallic Silver Minifig, Weapon Lightsaber Hilt Straight (Extra)
Comments from Submitter:
source: Sealed Set
|
Author: | leggodtshop | Posted: | Jul 15, 2018 19:14 | Subject: | Re: More colors of Duplo bricks? | Viewed: | 25 times | Topic: | Colors | |
| In Colors, randyf writes:
| In Colors, patpendlego writes:
| Hi,
More colors, need help on these too. The left one is blue I guess, but what about
the other two?
Thx,
Arnoud
|
Medium Blue and Dark Orange
Cheers,
Randy
|
Thx again!
|
Author: | randyf | Posted: | Jul 15, 2018 19:11 | Subject: | Re: More colors of Duplo bricks? | Viewed: | 22 times | Topic: | Colors | |
| In Colors, patpendlego writes:
| Hi,
More colors, need help on these too. The left one is blue I guess, but what about
the other two?
Thx,
Arnoud
|
Medium Blue and Dark Orange
Cheers,
Randy
|
Author: | leggodtshop | Posted: | Jul 15, 2018 19:11 | Subject: | Re: Colors of Duplo bricks? | Viewed: | 24 times | Topic: | Colors | |
| In Colors, randyf writes:
| In Colors, patpendlego writes:
| Hi!
Anyone help please! I have here three Duplo bricks with different colors green
see image, but only two greens are known on BL: Bright Green and Green, which
are the greens on the image? (The fourth on the back is Yellow).
Thx,
Arnoud
|
From R to L: Green, Bright Green, and Lime.
Cheers,
Randy
|
Great!
Thx
|
Author: | leggodtshop | Posted: | Jul 15, 2018 19:10 | Subject: | More colors of Duplo bricks? | Viewed: | 58 times | Topic: | Colors | Status: | Open | |
| Hi,
More colors, need help on these too. The left one is blue I guess, but what about
the other two?
Thx,
Arnoud
|
|
Author: | randyf | Posted: | Jul 15, 2018 19:10 | Subject: | Re: Colors of Duplo bricks? | Viewed: | 15 times | Topic: | Colors | |
| In Colors, patpendlego writes:
| Hi!
Anyone help please! I have here three Duplo bricks with different colors green
see image, but only two greens are known on BL: Bright Green and Green, which
are the greens on the image? (The fourth on the back is Yellow).
Thx,
Arnoud
|
From R to L: Green, Bright Green, and Lime.
Cheers,
Randy
|
Author: | leggodtshop | Posted: | Jul 15, 2018 19:03 | Subject: | Colors of Duplo bricks? | Viewed: | 50 times | Topic: | Colors | Status: | Open | |
| Hi!
Anyone help please! I have here three Duplo bricks with different colors green
see image, but only two greens are known on BL: Bright Green and Green, which
are the greens on the image? (The fourth on the back is Yellow).
Thx,
Arnoud
|
|
Author: | uvt203 | Posted: | Jul 15, 2018 10:49 | Subject: | Re: What's the deal about bluish gray? | Viewed: | 60 times | Topic: | Colors | |
| In Colors, StormChaser writes:
| In Colors, mhortar writes:
| I thought the color change was in 2004, but I could be wrong.
|
You are correct. The changeover from older grays and brown to the newer shades
occurred in 2004.
|
Sorry my mistake - time runs faster and faster with age.....
/Asger
|
|
Author: | normann1974 | Posted: | Jul 15, 2018 06:52 | Subject: | Re: Inventory Change Request for Set 7016-1 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, mhortar writes:
| In Inventories Requests, normann1974 writes:
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Add 2 Part 3795 Dark Bluish Gray Plate 2 x 6 (Alternate) (match ID 4)
* Change 1 Part Dark Bluish Gray 3032 Plate 4 x 6 {match ID 0 to 4}
Comments from Submitter:
Proof is a correction sheet which I've uploaded as extra instruction image. Will also post it as reponse to this request in forum. At least some of these sets come with this change. If this is considered a redesign, feel free to change match ID to 99.
|
|
I don't have this set, so I'm curious why this change was made. It would
seem to me that it would be making the structure less stable, but I'm only
seeing this initial page.
Josh
|
Maybe they temporarily ran out of 4x6 plates, or maybe they had accidentally
packed a million sets with wrong pieces and needed a quick solution?
/Jan
|
|
Author: | minithings4life | Posted: | Jul 15, 2018 06:45 | Subject: | Re: Inventory Change Request for Minifig mba001 | Viewed: | 20 times | Topic: | Inventories Requests | |
| Yes I removed it from a factory sealed set. I was given the minifigs to put in
my collection and someone else had the set.
In Inventories Requests, StormChaser writes:
| In Inventories Requests, Minifigforlife writes:
Wee bit of a problem with your photo. The set includes one complete minifigure.
That's one head, one torso assembly, and one legs assembly. You said in
your original post:
| Have a sealed minifig pack with that head
|
Your photo of the sealed bag from the set shows two torso assemblies, two legs
assemblies, and three heads with no other parts. That ain't quite right,
friend.
In fact, it's way off. Did you personally take that bag out of a factory-sealed
set which had not been tampered with?
|
|
|
Author: | LeGoLem | Posted: | Jul 15, 2018 05:17 | Subject: | Re: What's the deal about bluish gray? | Viewed: | 94 times | Topic: | Colors | |
| Thank you guys!
I should have run a search on the Internet. I found this now: http://www.brickpile.com/articles/grey-bluish-gray-stone-grey-or-blay/
In Colors, LeGoLem writes:
| I am looking for gray bricks and part, but anywhere I look people only sell dark
or light bluish gray instead of regular gray parts. Why is that? Where are the
good old light gray parts? Why did regular gray become so rare?
|
|
Author: | StormChaser | Posted: | Jul 15, 2018 04:04 | Subject: | Re: Inventory Change Request for Set 6318-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, flame2014 writes:
| I measured palm leaf size and it is definitely 5x10 not 3x8
|
Was your set new or used?
|
Author: | StormChaser | Posted: | Jul 15, 2018 03:56 | Subject: | Re: Inventory Change Request for Minifig mba001 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, Minifigforlife writes:
Wee bit of a problem with your photo. The set includes one complete minifigure.
That's one head, one torso assembly, and one legs assembly. You said in
your original post:
| Have a sealed minifig pack with that head
|
Your photo of the sealed bag from the set shows two torso assemblies, two legs
assemblies, and three heads with no other parts. That ain't quite right,
friend.
In fact, it's way off. Did you personally take that bag out of a factory-sealed
set which had not been tampered with?
|
|
Author: | StormChaser | Posted: | Jul 15, 2018 03:50 | Subject: | Re: Inventory Change Request for Set 76036-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, mhortar writes:
| Minifig inventories really should include *all* accessories as pictured in the
instructions.
|
Any issues regarding what officially constitutes a minifigure should be addressed
to the catalog administrators. These issues are not inventory issues because
the catalog entry for a minifigure predetermines what the inventory of that minifigure
includes.
|
|
Author: | StormChaser | Posted: | Jul 15, 2018 03:48 | Subject: | Re: Inventory Change Request for Set 76036-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, mhortar writes:
| How does the system take into account inventory changes in sets that sellers
currently have for sale?
|
The system does not directly notify anyone of changes to set inventories.
| Would I get notified that an item I have for sale has been modified?
|
No, you would not be notified.
| Does it get automatically moved from my store to my stockroom until I verify the change?
|
No, this does not occur.
| Inventory changes seem to happen all the time for sets and it doesn't seem
to cause much of an issue, so wouldn't minifigs just be treated the same
way?
|
Yes, changes do frequently occur in set inventories. I have never been told
why minifigures are treated differently.
However, any issues regarding what officially constitutes a minifigure should
be addressed to the catalog administrators. These issues are not inventory issues
because the catalog entry for a minifigure predetermines what the inventory of
that minifigure includes.
|
|
Author: | StormChaser | Posted: | Jul 15, 2018 03:43 | Subject: | Re: What's the deal about bluish gray? | Viewed: | 61 times | Topic: | Colors | |
| In Colors, mhortar writes:
| I thought the color change was in 2004, but I could be wrong.
|
You are correct. The changeover from older grays and brown to the newer shades
occurred in 2004.
|
|
Author: | Hygrotus | Posted: | Jul 15, 2018 03:42 | Subject: | Re: What's the deal about bluish gray? | Viewed: | 49 times | Topic: | Colors | |
| In Colors, mhortar writes:
| In Colors, uvt203 writes:
| In Colors, Pippyblocks writes:
| It's because Lego replaced light grey with light bluish grey a long time
back so now all the light greys are harder to get, unfortunately.
In Colors, LeGoLem writes:
| I am looking for gray bricks and part, but anywhere I look people only sell dark
or light bluish gray instead of regular gray parts. Why is that? Where are the
good old light gray parts? Why did regular gray become so rare?
|
|
That's correct. In 2006 LEGO changed Light Gray to Light Bluish Gray, Dark
Gray to Dark Bluish Gray and Brown to Reddish Brown. So all sets from after 2006/2007
have these 3 new colors and all before have the old colors. So the old colors
become more and more rare - especially in new conditions.
Asger
|
I thought the color change was in 2004, but I could be wrong.
Josh
|
Yes it was in 2004
http://www.brickwiki.info/wiki/Colour_change
https://www.eurobricks.com/forum/index.php?/forums/topic/44678-why-the-colour-changes-of-2004/
|
|
Author: | mhortar | Posted: | Jul 15, 2018 03:34 | Subject: | Re: What's the deal about bluish gray? | Viewed: | 62 times | Topic: | Colors | |
| In Colors, uvt203 writes:
| In Colors, Pippyblocks writes:
| It's because Lego replaced light grey with light bluish grey a long time
back so now all the light greys are harder to get, unfortunately.
In Colors, LeGoLem writes:
| I am looking for gray bricks and part, but anywhere I look people only sell dark
or light bluish gray instead of regular gray parts. Why is that? Where are the
good old light gray parts? Why did regular gray become so rare?
|
|
That's correct. In 2006 LEGO changed Light Gray to Light Bluish Gray, Dark
Gray to Dark Bluish Gray and Brown to Reddish Brown. So all sets from after 2006/2007
have these 3 new colors and all before have the old colors. So the old colors
become more and more rare - especially in new conditions.
Asger
|
I thought the color change was in 2004, but I could be wrong.
Josh
|
|
Author: | uvt203 | Posted: | Jul 15, 2018 03:04 | Subject: | Re: What's the deal about bluish gray? | Viewed: | 63 times | Topic: | Colors | |
| In Colors, Pippyblocks writes:
| It's because Lego replaced light grey with light bluish grey a long time
back so now all the light greys are harder to get, unfortunately.
In Colors, LeGoLem writes:
| I am looking for gray bricks and part, but anywhere I look people only sell dark
or light bluish gray instead of regular gray parts. Why is that? Where are the
good old light gray parts? Why did regular gray become so rare?
|
|
That's correct. In 2006 LEGO changed Light Gray to Light Bluish Gray, Dark
Gray to Dark Bluish Gray and Brown to Reddish Brown. So all sets from after 2006/2007
have these 3 new colors and all before have the old colors. So the old colors
become more and more rare - especially in new conditions.
Asger
|
|
Author: | mhortar | Posted: | Jul 15, 2018 02:53 | Subject: | Re: Inventory Change Request for Set 76036-1 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In this particular instance, the proper route would be to submit a new minifigure
to the catalog with photo. We typically don't change the inventories of
minifigures because we don't want buyers or sellers to end up in a bind.
|
I had a specific question about this part of your response.
How does the system take into account inventory changes in sets that sellers
currently have for sale? Say I have a used set for sale in my store and someone
makes an inventory change to increase the quantity of a part from 3 to 4. Would
I get notified that an item I have for sale has been modified? Does it get automatically
moved from my store to my stockroom until I verify the change?
Inventory changes seem to happen all the time for sets and it doesn't seem
to cause much of an issue, so wouldn't minifigs just be treated the same
way? Or is this another case where minifigs should be treated as a 'set'
of minifig parts but aren't (like 'no alternates in minifig inventories'.
Josh
|
|
Author: | Hygrotus | Posted: | Jul 15, 2018 02:52 | Subject: | Re: Inventory Change Request for Set 6318-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, flame2014 writes:
| Please make changes to the following inventory:
* Change 4 Part Green {6148 Plant, Tree Palm Leaf Small 8 x 3 to 2518 Plant, Tree Palm Leaf Large 10 x 5}
Comments from Submitter:
I measured palm leaf size and it is definitely 5x10 not 3x8
|
According to this review in this set are smaller ones palm leafs
https://www.eurobricks.com/forum/index.php?/forums/topic/52675-review-6305-6317-6319-6318/
There is picture which compare leaves from set
which has larger ones.
Marek
|
|
Author: | Pippysblocks | Posted: | Jul 15, 2018 02:46 | Subject: | Re: What's the deal about bluish gray? | Viewed: | 69 times | Topic: | Colors | |
| It's because Lego replaced light grey with light bluish grey a long time
back so now all the light greys are harder to get, unfortunately.
In Colors, LeGoLem writes:
| I am looking for gray bricks and part, but anywhere I look people only sell dark
or light bluish gray instead of regular gray parts. Why is that? Where are the
good old light gray parts? Why did regular gray become so rare?
|
|
|
Author: | mhortar | Posted: | Jul 15, 2018 02:44 | Subject: | Re: Inventory Change Request for Set 76036-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, Teup writes:
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, Teup writes:
This is an area of the BrickLink catalog where there is inconsistency. Any changes
made to minifigure assemblies should ideally be system-wide, which would involve
policy changes and multiple new catalog entries and deletions of existing entries.
I'm open to that, but I do not have the final say-so in matters such as these.
In this particular instance, the proper route would be to submit a new minifigure
to the catalog with photo. We typically don't change the inventories of
minifigures because we don't want buyers or sellers to end up in a bind.
|
I don't think that much needs to change, this figure is the only situation
I am currently aware of that something that is "biologically" part of a body
is removed for the Bricklink figure.
But I do get your point about modifying minifigs. Too tricky since there is a
picture that has it without that part and sellers have already been listing them.
I'm curious however how many have assembled/packed them the Bricklink way
and how many did it what I think is the right way (if you look at the instructions
and every picture of the figure). When I packed them, I didn't even have
a second of doubt that 1 of these 5 parts could be not a bodypart. There also
exist crab pincers and such that are "handheld", plus this part is literally
in a bodypart category. Apart from this minifig, the Bricklink catalog always
made perfect sense to me.
I don't have any of these figures anymore, otherwise I would at least submit
a picture for a possible addition.
|
The plant CMF is in the same situation (the plant 'arms' aren't
included in the minifig entry).
Even Wolverine doesn't have his claws in the minifig entry, which
are integrated into his body (following the movies/comics anyway).
It's confusing that minifig entries contain everything present in the LEGO
instructions *except* for what is in the minifig's hands. So Magneto
comes with a dark gray 1x2 round plate because it's attached to his feet,
Iron Man minifigs come with the 1x2 round bricks on his feet, but Wolverine doesn't
get his claws because they are in his hands.
Minifig inventories really should include *all* accessories as pictured in the
instructions.
Josh
|
|
Author: | LeGoLem | Posted: | Jul 15, 2018 02:43 | Subject: | What's the deal about bluish gray? | Viewed: | 195 times | Topic: | Colors | Status: | Open | |
| I am looking for gray bricks and part, but anywhere I look people only sell dark
or light bluish gray instead of regular gray parts. Why is that? Where are the
good old light gray parts? Why did regular gray become so rare?
|
|
Author: | mhortar | Posted: | Jul 15, 2018 02:21 | Subject: | Re: Inventory Change Request for Set 7016-1 | Viewed: | 24 times | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Add 2 Part 3795 Dark Bluish Gray Plate 2 x 6 (Alternate) (match ID 4)
* Change 1 Part Dark Bluish Gray 3032 Plate 4 x 6 {match ID 0 to 4}
Comments from Submitter:
Proof is a correction sheet which I've uploaded as extra instruction image. Will also post it as reponse to this request in forum. At least some of these sets come with this change. If this is considered a redesign, feel free to change match ID to 99.
|
|
I don't have this set, so I'm curious why this change was made. It would
seem to me that it would be making the structure less stable, but I'm only
seeing this initial page.
Josh
|
|
Author: | normann1974 | Posted: | Jul 14, 2018 17:30 | Subject: | Re: Inventory Change Request for Set 7016-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| Please make changes to the following inventory:
* Add 2 Part 3795 Dark Bluish Gray Plate 2 x 6 (Alternate) (match ID 4)
* Change 1 Part Dark Bluish Gray 3032 Plate 4 x 6 {match ID 0 to 4}
Comments from Submitter:
Proof is a correction sheet which I've uploaded as extra instruction image. Will also post it as reponse to this request in forum. At least some of these sets come with this change. If this is considered a redesign, feel free to change match ID to 99.
|
|
|
|
Author: | normann1974 | Posted: | Jul 14, 2018 17:30 | Subject: | Inventory Change Request for Set 7016-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3795 Dark Bluish Gray Plate 2 x 6 (Alternate) (match ID 4)
* Change 1 Part Dark Bluish Gray 3032 Plate 4 x 6 {match ID 0 to 4}
Comments from Submitter:
Proof is a correction sheet which I've uploaded as extra instruction image. Will also post it as reponse to this request in forum. At least some of these sets come with this change. If this is considered a redesign, feel free to change match ID to 99.
|
|
Author: | Teup | Posted: | Jul 14, 2018 17:20 | Subject: | Re: Inventory Change Request for Set 76036-1 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, Teup writes:
This is an area of the BrickLink catalog where there is inconsistency. Any changes
made to minifigure assemblies should ideally be system-wide, which would involve
policy changes and multiple new catalog entries and deletions of existing entries.
I'm open to that, but I do not have the final say-so in matters such as these.
In this particular instance, the proper route would be to submit a new minifigure
to the catalog with photo. We typically don't change the inventories of
minifigures because we don't want buyers or sellers to end up in a bind.
|
I don't think that much needs to change, this figure is the only situation
I am currently aware of that something that is "biologically" part of a body
is removed for the Bricklink figure.
But I do get your point about modifying minifigs. Too tricky since there is a
picture that has it without that part and sellers have already been listing them.
I'm curious however how many have assembled/packed them the Bricklink way
and how many did it what I think is the right way (if you look at the instructions
and every picture of the figure). When I packed them, I didn't even have
a second of doubt that 1 of these 5 parts could be not a bodypart. There also
exist crab pincers and such that are "handheld", plus this part is literally
in a bodypart category. Apart from this minifig, the Bricklink catalog always
made perfect sense to me.
I don't have any of these figures anymore, otherwise I would at least submit
a picture for a possible addition.
|
|
Author: | flame2014 | Posted: | Jul 14, 2018 17:18 | Subject: | Inventory Change Request for Set 6318-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Green {6148 Plant, Tree Palm Leaf Small 8 x 3 to 2518 Plant, Tree Palm Leaf Large 10 x 5}
Comments from Submitter:
I measured palm leaf size and it is definitely 5x10 not 3x8
|
|
Author: | minithings4life | Posted: | Jul 14, 2018 14:52 | Subject: | Re: Inventory Change Request for Minifig mba001 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, Minifigforlife writes:
| Please make changes to the following inventory:
* Change 1 Part Yellow {3626bpb0121 Minifig, Head Brown Eyebrows, Thin Grin, Black Eyes with White Pupils Pattern - Blocked Open Stud to 3626cp01 Minifig, Head Standard Grin Pattern - Stud Recessed}
Comments from Submitter:
Have a sealed minifig pack with that head plus the instructions show that one.
|
Please share pictures of the sealed package. I've watched a couple of YouTube
unboxing videos and they show the head as currently inventoried.
If the set did come with a different head, then a new minifigure should be added
to the catalog with the alternate head.
|
|
|
|
Author: | brickadoon | Posted: | Jul 14, 2018 13:38 | Subject: | Re: Inventory Change Request for Set 70907-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| In Inventories Requests, brickadoon writes:
| This request is for another stickered part in set 70907 that isn't currently
in its inventory.
|
Yes, I was aware of that. This request was already approved. I just wanted
to make sure you hadn't missed my message about the problem photo of the
other part.
|
Sorry, I misunderstood! Replacement photo has been uploaded so hopefully that
request is OK now too.
Thanks,
Rich
|
|
Author: | StormChaser | Posted: | Jul 14, 2018 13:22 | Subject: | Re: Inventory Change Request for Set 70907-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, brickadoon writes:
| This request is for another stickered part in set 70907 that isn't currently
in its inventory.
|
Yes, I was aware of that. This request was already approved. I just wanted
to make sure you hadn't missed my message about the problem photo of the
other part.
|
|
Author: | StormChaser | Posted: | Jul 14, 2018 13:21 | Subject: | Re: Inventory Change Request for Set 76036-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
| In Inventories Requests, Teup writes:
This is an area of the BrickLink catalog where there is inconsistency. Any changes
made to minifigure assemblies should ideally be system-wide, which would involve
policy changes and multiple new catalog entries and deletions of existing entries.
I'm open to that, but I do not have the final say-so in matters such as these.
In this particular instance, the proper route would be to submit a new minifigure
to the catalog with photo. We typically don't change the inventories of
minifigures because we don't want buyers or sellers to end up in a bind.
|
|
Author: | brickadoon | Posted: | Jul 14, 2018 13:16 | Subject: | Re: Inventory Change Request for Set 70907-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
I did - I've uploaded a new photo for that part.
This request is for another stickered part in set 70907 that isn't currently
in its inventory.
Thanks, Rich
|
|
Author: | StormChaser | Posted: | Jul 14, 2018 13:12 | Subject: | Re: Inventory Change Request for Minifig mba001 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, Minifigforlife writes:
| Please make changes to the following inventory:
* Change 1 Part Yellow {3626bpb0121 Minifig, Head Brown Eyebrows, Thin Grin, Black Eyes with White Pupils Pattern - Blocked Open Stud to 3626cp01 Minifig, Head Standard Grin Pattern - Stud Recessed}
Comments from Submitter:
Have a sealed minifig pack with that head plus the instructions show that one.
|
Please share pictures of the sealed package. I've watched a couple of YouTube
unboxing videos and they show the head as currently inventoried.
If the set did come with a different head, then a new minifigure should be added
to the catalog with the alternate head.
|
|
Author: | Teup | Posted: | Jul 14, 2018 13:04 | Subject: | Re: Inventory Change Request for Set 76036-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
| Huh? Surely this can't be intentional? If it is an accessory, why are the
4 on his back then considered part of his body?
It's not an accessory..
In Inventories Requests, StormChaser writes:
| In Inventories Requests, Teup writes:
| Please make changes to the following inventory:
* Delete 1 Part 55236 Red Appendage Spiky / Bionicle Spine / Seaweed / Plant Vine
Comments from Submitter:
Part belongs to minifig
|
This part is considered a hand-held accessory for this figure. Hand-held accessories
are not included in minifigure inventories and this request was not approved.
https://www.bricklink.com/help.asp?helpID=200
|
|
|
Author: | StormChaser | Posted: | Jul 14, 2018 13:02 | Subject: | Re: Inventory Change Request for Set 76036-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, Teup writes:
| Please make changes to the following inventory:
* Delete 1 Part 55236 Red Appendage Spiky / Bionicle Spine / Seaweed / Plant Vine
Comments from Submitter:
Part belongs to minifig
|
This part is considered a hand-held accessory for this figure. Hand-held accessories
are not included in minifigure inventories and this request was not approved.
https://www.bricklink.com/help.asp?helpID=200
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|