Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | calsbricks  | | Posted: | Jun 14, 2018 13:21 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 38 times | | Topic: | Suggestions | |
|
| In Suggestions, calsbricks writes:
| | In Suggestions, jenwick writes:
| | In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
Of course
On the right hand side of the My Inventory page there are several options to
choose from, but one that is missing is colour. When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004. You can do this if
you use the PCC but who know those off the top of their head.
On the sub totals when you see your inventory by category it is a simple list
broken by Sets, Parts etc. Rather than having to add up all the totals of lots,
items and value manually, it would be better if they were sub totalled so at
a glance I could see how many of each mainline category we have at any time.
Hoppe that makes it clearer if not let me know and I will put together some screen
shots of how we think it should look for easier use.
|
See below two very crude attachments - the first shows where we would like the
colour filter and the 2nd shows a small cut-out of the left hand side of the
MY inventory screen where your inventory is shown by category. We would like
subtotals after each main break e.g. sets, parts, minifigures, etc.
A summary at the bottom would be nice so at a glance you can see how your inventory
is broken down e.g.
Lots Items Value % of total
Sets xxxx xxxx xxxx
Parts xxxx xxxx xxxx
Minfigures xxxx xxxx xxxx
Again, at a glance one could tell a good deal more about your inventory from
this simple calculation.
|
|
 |
| Author: | calsbricks | | Posted: | Jun 14, 2018 12:53 | | Subject: | Re: Improvements needed on My Inventory Page | | Viewed: | 43 times | | Topic: | Suggestions | |
|
| In Suggestions, jenwick writes:
| | In Suggestions, calsbricks writes:
| | Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
|
Can you elaborate on what you mean by these two points?
|
Of course
On the right hand side of the My Inventory page there are several options to
choose from, but one that is missing is colour. When I want to see how many dark
green 1 x 2 bricks I have I have to put in 3004 and look at hundreds to find
the dark green, rather than just choosing dark green 3004. You can do this if
you use the PCC but who know those off the top of their head.
On the sub totals when you see your inventory by category it is a simple list
broken by Sets, Parts etc. Rather than having to add up all the totals of lots,
items and value manually, it would be better if they were sub totalled so at
a glance I could see how many of each mainline category we have at any time.
Hoppe that makes it clearer if not let me know and I will put together some screen
shots of how we think it should look for easier use.
|
|
| Author: | calsbricks | | Posted: | Jun 12, 2018 07:58 | | Subject: | Improvements needed on My Inventory Page | | Viewed: | 99 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Please consider the following:
1. Add colour as an option
2. When using the 'by category filter@ please show sub-totals by category
It would also be a good idea to incorporate the ability to update selected inventory
items into a superlot.
In addition, whilst you can use external tools to work on pricing it would be
far better if that type of tool existed on the MY Inventory page.
We are aware there has been discussion over sellers tools since 2013, and these
things may or may not be in those new tools, however it is now 5 years since
that discussion began and to date, I am not sure anyone is aware of what may
or may not be coming.
We are led to believe that Admin_Jaclyn is project managing the sellers tools
- Could we have an indication as to what is being considered, please?
|
|
| Author: | calsbricks | | Posted: | May 28, 2018 07:37 | | Subject: | Re: Improve add item screen | | Viewed: | 36 times | | Topic: | Suggestions | |
|
| In Suggestions, Pippyblocks writes:
| | Out of interest, I noticed some of your used plates are slightly more expensive
than your new ones. I've noticed this with my inventory before when I've
gone through to adjust pricing and wondered why / how this happened because obviously,
customers would pick out the new over used as it is cheaper.
|
Hello there
Thank you for your comments. Sometimes used is more expensive than new based
on demand and availability. Like you we would always buy new if that were the
case. We get buyers who buy the used even though new is less expensive. It doesn't
always marry up with logic and is part and parcel of the Bricklink/Lego world.
| |
In Suggestions, calsbricks writes:
| | Yesterday I added about 6000 dark green 1 x 1 plates to our inventory as we continue
to build up quantities of standard items. I listed them at our standard price
and then later on went to my inventory page, called up that item and added a
tiered price at 1p below our standard price for quantities of 100 or more. Fine
- no problem.
Today additional stock of that particular item came across my desk to be added
and I went to add the item - filled in all information to add the additional
pieces. Lo and behold the system removed my tiered price and set it back to 0.
As it is not really possible to remember all the items we have on tiered pricing,
I believe the system should either show you this or have an option to retain
tiered pricing.
Anyone else - or is there a workaround to ensuring the tiered pricing sticks.
|
|
|
|
| Author: | calsbricks | | Posted: | May 28, 2018 07:15 | | Subject: | Re: Improve add item screen | | Viewed: | 36 times | | Topic: | Suggestions | |
|
| In Suggestions, calsbricks writes:
| | Yesterday I added about 6000 dark green 1 x 1 plates to our inventory as we continue
to build up quantities of standard items. I listed them at our standard price
and then later on went to my inventory page, called up that item and added a
tiered price at 1p below our standard price for quantities of 100 or more. Fine
- no problem.
Today additional stock of that particular item came across my desk to be added
and I went to add the item - filled in all information to add the additional
pieces. Lo and behold the system removed my tiered price and set it back to 0.
As it is not really possible to remember all the items we have on tiered pricing,
I believe the system should either show you this or have an option to retain
tiered pricing.
Anyone else - or is there a workaround to ensuring the tiered pricing sticks.
|
The workaround is there - don't use the ad item screen. Go to my inventory
and simply change the quantity of the part and submit changes. Please consider
enhancing the normal add item screen to either see the pricing you have set up
or to retain any tiered pricing for that item.
Thanks.
|
|
| Author: | calsbricks | | Posted: | May 28, 2018 07:12 | | Subject: | Improve add item screen | | Viewed: | 97 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Yesterday I added about 6000 dark green 1 x 1 plates to our inventory as we continue
to build up quantities of standard items. I listed them at our standard price
and then later on went to my inventory page, called up that item and added a
tiered price at 1p below our standard price for quantities of 100 or more. Fine
- no problem.
Today additional stock of that particular item came across my desk to be added
and I went to add the item - filled in all information to add the additional
pieces. Lo and behold the system removed my tiered price and set it back to 0.
As it is not really possible to remember all the items we have on tiered pricing,
I believe the system should either show you this or have an option to retain
tiered pricing.
Anyone else - or is there a workaround to ensuring the tiered pricing sticks.
|
|
| Author: | calsbricks | | Posted: | Mar 19, 2018 11:59 | | Subject: | Re: Save Offsite Paypal! | | Viewed: | 51 times | | Topic: | Suggestions | |
|
| In Suggestions, Brickwilbo writes:
| | In Suggestions, calsbricks writes:
| | In Suggestions, WoutR writes:
| | In Suggestions, PurpleDave writes:
| | Bricklink famously ground to a halt, twice, because it got hacked. The site
may have been restored to working condition, but a lot of us want nothing to
do with risking exposure of our financial accounts to anyone who may be lurking
behind the scenes. Sellers don't want to give Bricklink the level of control
required to accept payments through Bricklink. Bricklink has announced that
in about a month, they plan to scuttle offsite Paypal as a payment option, without
even taking any input from their core membership. The reason stated was that
new, usually one-time buyers, can't figure out where the payment button is
when they select offsite Paypal as a payment option, so they plan to basically
cut off any buyers and sellers who refuse to use any other form of payment, and
who especially want nothing to do with any onsite Paypal options.
Make offsite Paypal an opt-in payment option. Sellers obviously have to select
up front which payment options they will accept. Make all _buyers_ voluntarily
choose to see offsite Paypal as a payment option when checking out. If a seller
does not accept any other payment options, have them flagged as "does not ship
to you", just like if they were from another country and didn't have your
country enabled for shipping options. If a new buyer signs up, they should be
required to read an explanation of how offsite Paypal works, and confirm that
they want to be able to choose that as a payment option before they even see
it appear in lists.
But seriously, don't chase away a bunch of your regular customers in the
hope that you might be able to "grow your business" on the bank accounts of people
who just get sent here to buy a replacement part that LEGO Consumer Affairs can't
provide, or who are looking for just one retired set, and will never log in again
after they receive their shipment.
|
Was there not a page in my account settings where I could select my payment methods?
And a filter that hides stores that do not accept my payment types?
Then all what needs to be done is make the default setting for accepting Offsite
Paypal "OFF". (I would not recommend the name "offsite Paypal", I think that
name only makes sense within the current discussion. )
Maybe it was this one... https://www.bricklink.com/storeSettings.new.asp
And yes, save offsite Paypal as an option.
|
That page has been disabled for a while, however buyers can choose their acceptable
payment methods in the advanced search options and Paypal is still listed there.
Not sure about wanted lists cause I don't use that feature, but am sure I
have seen it mentioned somewhere.
|
https://www.bricklink.com/wantedSettings.asp?viewFrom=P
|
Thanks for the link - never been there before as wanted lists are not required
for our buying.
| | | | Even the payment method element is flawed in design terms. We just had to cancel
an order from someone who chose to pay in euros via Bank Transfer. We only accept
UK pounds for bank transfers and that is/was stated in our terms but because
we aaccept euros (accepted currencies) they were allowed to choose that currency.
Currencies should be defined against payment methods. If you set up bank transfer
you should be able to say GBP only and have that as a viable payment methods.
Again it is not a complicated thing to do - you could have an all radio button
or individual buttons which would need to be marked by the stores for what they
will accept.
They have gone the other way - here are the currencies we accept and here are
ther payment methods you can use. ?????????
|
|
|
|
| Author: | calsbricks | | Posted: | Mar 19, 2018 06:26 | | Subject: | Re: Save Offsite Paypal! | | Viewed: | 66 times | | Topic: | Suggestions | |
|
| In Suggestions, WoutR writes:
| | In Suggestions, PurpleDave writes:
| | Bricklink famously ground to a halt, twice, because it got hacked. The site
may have been restored to working condition, but a lot of us want nothing to
do with risking exposure of our financial accounts to anyone who may be lurking
behind the scenes. Sellers don't want to give Bricklink the level of control
required to accept payments through Bricklink. Bricklink has announced that
in about a month, they plan to scuttle offsite Paypal as a payment option, without
even taking any input from their core membership. The reason stated was that
new, usually one-time buyers, can't figure out where the payment button is
when they select offsite Paypal as a payment option, so they plan to basically
cut off any buyers and sellers who refuse to use any other form of payment, and
who especially want nothing to do with any onsite Paypal options.
Make offsite Paypal an opt-in payment option. Sellers obviously have to select
up front which payment options they will accept. Make all _buyers_ voluntarily
choose to see offsite Paypal as a payment option when checking out. If a seller
does not accept any other payment options, have them flagged as "does not ship
to you", just like if they were from another country and didn't have your
country enabled for shipping options. If a new buyer signs up, they should be
required to read an explanation of how offsite Paypal works, and confirm that
they want to be able to choose that as a payment option before they even see
it appear in lists.
But seriously, don't chase away a bunch of your regular customers in the
hope that you might be able to "grow your business" on the bank accounts of people
who just get sent here to buy a replacement part that LEGO Consumer Affairs can't
provide, or who are looking for just one retired set, and will never log in again
after they receive their shipment.
|
Was there not a page in my account settings where I could select my payment methods?
And a filter that hides stores that do not accept my payment types?
Then all what needs to be done is make the default setting for accepting Offsite
Paypal "OFF". (I would not recommend the name "offsite Paypal", I think that
name only makes sense within the current discussion. )
Maybe it was this one... https://www.bricklink.com/storeSettings.new.asp
And yes, save offsite Paypal as an option.
|
That page has been disabled for a while, however buyers can choose their acceptable
payment methods in the advanced search options and Paypal is still listed there.
Not sure about wanted lists cause I don't use that feature, but am sure I
have seen it mentioned somewhere.
Even the payment method element is flawed in design terms. We just had to cancel
an order from someone who chose to pay in euros via Bank Transfer. We only accept
UK pounds for bank transfers and that is/was stated in our terms but because
we aaccept euros (accepted currencies) they were allowed to choose that currency.
Currencies should be defined against payment methods. If you set up bank transfer
you should be able to say GBP only and have that as a viable payment methods.
Again it is not a complicated thing to do - you could have an all radio button
or individual buttons which would need to be marked by the stores for what they
will accept.
They have gone the other way - here are the currencies we accept and here are
ther payment methods you can use. ?????????
|
|
| Author: | calsbricks | | Posted: | Mar 19, 2018 06:17 | | Subject: | Re: Save Offsite Paypal! | | Viewed: | 63 times | | Topic: | Suggestions | |
|
| In Suggestions, Teup writes:
| | In Suggestions, calsbricks writes:
| |
Are they going to go through 11,000 stores and remove the Paypal option from
their payment methods when the April date comes around?
|
Well, no, they simply remove the old PayPal payment method from the main system
once, and then it will be as you say, people (like me) who haven't accepted
will automatically get an instruction to enable the new PayPal. That's what
I assume anyway.... then again, it's Bricklink... they can't even remove
multiple forum posts by one spammer at the same time... 
|
I think they may have already done the first bit as I do not see a payment method
for Paypal or paypal offsite in the selectable payment methods options (drop
down). I really meant from the stores point of view. There are countless numbers
of stores who only accept Paypal - by disabling it as a payment method does that
mean the stores will have no payment methods? That will cause a moderate amount
of chaos. Not everyone reads the forum, by a long way and announcements such
as the one that was made will not have filtered through to all stores. So you
wake up the morning after and find that no one can check out of your store? Sounds
unreasonable even now, but who knows.
Really not sure how this decision was made or why - the ticket thing was a non-starter
- there is more to this than that. Instant checkout has still only mustered less
than 15% of stores - is still buggy. Onsite Paypal is still flawed as far as
a buyer having multiple Paypal addresses and yet here we are ...... ????????
|
|
| Author: | calsbricks | | Posted: | Mar 19, 2018 02:20 | | Subject: | Re: Save Offsite Paypal! | | Viewed: | 78 times | | Topic: | Suggestions | |
|
| In Suggestions, chetzler writes:
| | I'm curious if BL will continue to offer the multitude other off-sites methods.
Anyone looked at what is still available? There's a bunch I've never
even heard of, and seriously, is a Western Union transfer a better option than
PayPal off-site?
|
Our Paypal account works for both Bricklink and our main company - there is absolutely
no way ever that we would allow Bricklink access to funds in that account or
details of transactions in that account - it is really none of their business.
I am sure that other people who have Paypal accounts and use them for Bricklink
also use those for other things and would not want any involvement with Bricklink
in their account.
This does not appear to be well thought through and even though it says you may
revoke the permissions you have given by signing up to this agreement what does
that mean - do you still have a paypal account for use on Bricklink or not? Is
it online or offline?
Are they going to go through 11,000 stores and remove the Paypal option from
their payment methods when the April date comes around? Stores will wake up to
a 'cannot receive orders as you have no payment methods available' (imagine
the tickets from that !!!!!) or are people going to set up other payment methods
but give Paypal offsite instructions in their invoices. How can they possibly
police this?
The mind boggles .....
All the clamour and yet no response from Bricklink. It is like they are saying
take-it or leave it (which is never a good idea in the best of environments.)
Such a real shame ........
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
United Kingdom, England
