Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | SezaR  | | Posted: | Apr 13, 2018 03:46 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| At first, I had checked the instructions but didn't see the legs of the hourse.
At the same time, I was in contact with a collector from Sweden. I asked him
and he said FIVE legs.
The photos that I uploaded are from the store Bluxe.
Stefaan, The problem is that there could have been a 6th leg so that the minifigure
on the horse can come down and walk, otherwise he has to borrow a pair of leg
from the legs or the "month" of that horse! 
In Inventories Requests, elias3 writes:
| | In Inventories Requests, SezaR writes:
| | Based on the comment of peterab, this inventory change request is not approved
No kidding, let me first check again with the collector of 12v train who checked
his copy yesterday. This is interesting now
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
|
Reza
What is the source here?
The instructions on Peeron are different as the build up on the picture.
Stefaan
|
|
 |
| Author: | Hygrotus | | Posted: | Apr 13, 2018 03:32 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
|
and now they replace it finally by new part
[m=sw909]
|
|
| Author: | elias3 | | Posted: | Apr 13, 2018 03:16 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Based on the comment of peterab, this inventory change request is not approved
No kidding, let me first check again with the collector of 12v train who checked
his copy yesterday. This is interesting now
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
|
Reza
What is the source here?
The instructions on Peeron are different as the build up on the picture.
Stefaan
|
|
| Author: | elias3 | | Posted: | Apr 13, 2018 03:13 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 3 Part 15 Black Legs Old
Comments from Submitter:
Already included in the minifigures
|
This request will not be approved because there appear to be 5 of these legs
in the set according to the set instructions and approval of this request would
drop the number to 3.
However, it does bring up an interesting point: the minifigures in the set are
incorrectly assembled. As Stefaan pointed out, some changes to the minifigure
parts would be appropriate. He suggests removing the figures and having only
the parts in the inventory and that's not a bad idea since the instructions
don't really show complete figures.
The other option would be the addition of a new figure to the catalog which is
assembled like this figure from the torso upwards:
but includes this part in black as the legs:
Then 2 of those would be included as figures as shown in the instructions and
the cowboy on the horse would have only his parts (torso, head, hat) in the inventory.
As for old029, the instructions don't show that figure assembled that way
and it could be marked for deletion.
|
Hi
At that time we have more minifigs build up when they sit down.
In this set, it looks we have 2 minifigs but not one, (or: only '1' and
a half  )
when that '1' is also sit down.
https://www.bricklink.com/catalogItemInv.asp?S=617-1
http://www.peeron.com/scans/617-1/1
This one, not a real minifig because the motorcycle is part of it
https://www.bricklink.com/catalogItemInv.asp?S=659-1
http://www.peeron.com/scans/659-1/3
This is a correct one: we have sit down but can build up as a minifig without
extra's.
https://www.bricklink.com/v2/catalog/catalogitem.page?S=696-1#T=I
http://www.peeron.com/scans/696-1/1
about use the 3004 part, already in use are the slope parts
https://www.bricklink.com/catalogItemInv.asp?M=cas404
https://www.bricklink.com/catalogItemInv.asp?M=cas412
Stefaan
|
|
| Author: | SezaR | | Posted: | Apr 13, 2018 03:13 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
| Based on the comment of peterab, this inventory change request is not approved
No kidding, let me first check again with the collector of 12v train who checked
his copy yesterday. This is interesting now
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
|
|
| Author: | peterab | | Posted: | Apr 13, 2018 02:47 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
Those photos actually show six legs. Two with the figures on either end of the
carriage, 3 on the nose and legs of the horse, and an extra one mounted behind
the figure on the rear of the horse.
|
|
| Author: | VorpalRyu | | Posted: | Apr 13, 2018 01:41 | | Subject: | Re: Inventory Change Request for Set 75199-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, VorpalRyu writes:
| | Please make changes to the following inventory:
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 3024 Trans-Light Blue Plate 1 x 1 (Extra)
* Add 1 Part 4592c02 Light Bluish Gray Lever Small Base with Black Lever (Extra)
* Add 1 Part 64567 Metallic Silver Minifig, Weapon Lightsaber Hilt Straight (Extra)
Comments from Submitter:
Built set, these parts were left over in addition to a pair of arms for General Grievous.
|
You didn't have trans green
?
54200 is very common extra in modern sets.
|
No, no extra 54200 in trans-green, which was annoying, I was hoping there would
be at least one spare to add to my MOC parts supplies. Of the translucent green
colours, trans-green is the one I have the smallest amount for that part, being
that it's one of my favourite translucent colours (along with trans-medium
& trans-dark blue). I bought the set for the minifigures, with plans to part
it out into my MOC supplies, so not a complete annoyance, my trans-green 54200
increased, only by one, but still an increase.
|
|
| Author: | StormChaser | | Posted: | Apr 13, 2018 01:06 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
Thank you for adding photos. Sorry, I wasn't paying attention when you posted:
| | As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
|
So a vintage train collector has confirmed what the instructions are showing
with his copy of the set.
|
|
| Author: | SezaR | | Posted: | Apr 13, 2018 00:56 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 39 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | Please make changes to the following inventory:
* Change {3 to 2} Part Black 15 Legs Old
Comments from Submitter:
No source is given for the existing inventory which includes a total of 6 legs. Peeron's inventory lists 6 legs also and the source is given as instructions.
However, the instructions only show a total of 5 legs (3 for the horse and 2 for minifigures). In the absence of any evidence from an actual set and because of the likelihood that BL/Peeron inventory sources were set instructions, I am changing the count of legs to match the count shown in the instructions. Note that Brickset's inventory currently shows only 5 legs.
|
|
|
|
| Author: | StormChaser | | Posted: | Apr 13, 2018 00:36 | | Subject: | Inventory Change Request for Set 726-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {3 to 2} Part Black 15 Legs Old
Comments from Submitter:
No source is given for the existing inventory which includes a total of 6 legs. Peeron's inventory lists 6 legs also and the source is given as instructions.
However, the instructions only show a total of 5 legs (3 for the horse and 2 for minifigures). In the absence of any evidence from an actual set and because of the likelihood that BL/Peeron inventory sources were set instructions, I am changing the count of legs to match the count shown in the instructions. Note that Brickset's inventory currently shows only 5 legs.
|
|
| Author: | SezaR | | Posted: | Apr 13, 2018 00:29 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
| Approved or rejected, there are only 5 of
not 6. Do I need to submit another request?
As I mentioned before, a collector checked his set and confirmed this. I can
also upload photos of Bluxe, if necessary.
Note that this set is the first train in which minifigure appear!
This set was released in 1976. I checked all catalogs I could find from 1977
but it did not appear in any of them.
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 3 Part 15 Black Legs Old
Comments from Submitter:
Already included in the minifigures
|
This request will not be approved because there appear to be 5 of these legs
in the set according to the set instructions and approval of this request would
drop the number to 3.
However, it does bring up an interesting point: the minifigures in the set are
incorrectly assembled. As Stefaan pointed out, some changes to the minifigure
parts would be appropriate. He suggests removing the figures and having only
the parts in the inventory and that's not a bad idea since the instructions
don't really show complete figures.
The other option would be the addition of a new figure to the catalog which is
assembled like this figure from the torso upwards:
but includes this part in black as the legs:
Then 2 of those would be included as figures as shown in the instructions and
the cowboy on the horse would have only his parts (torso, head, hat) in the inventory.
As for old029, the instructions don't show that figure assembled that way
and it could be marked for deletion.
|
|
|
| Author: | StormChaser | | Posted: | Apr 13, 2018 00:29 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | However, it does bring up an interesting point: the minifigures in the set are
incorrectly assembled. As Stefaan pointed out, some changes to the minifigure
parts would be appropriate. He suggests removing the figures and having only
the parts in the inventory and that's not a bad idea since the instructions
don't really show complete figures.
|
Someone has pointed out to me privately that the way the figures are inventoried
in this set is something of an unwritten rule for these types of figures. They
are special exceptions which should be addressed in writing, but are not.
Since there is no guidance in the Help sections regarding these types of figures,
I will wait until it exists before doing anything further with these figures.
|
|
| Author: | 1977_mauro | | Posted: | Apr 13, 2018 00:12 | | Subject: | Inventory Change Request for Set 10246-1 | | Viewed: | 40 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {2 to 3} Part Red 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
3 are used in the building and 3 are extra parts.
|
| Author: | samsam2 | | Posted: | Apr 12, 2018 23:42 | | Subject: | Inventory Change Request for Set 75887-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 63864pb069 White Tile 1 x 3 with 'SCHAEFFLER' Logo Pattern (Sticker) - Set 75887 (Counterpart)
* Add 1 Part 62698pb11 Black Minifig, Utensil Computer Laptop with Race Car on Screen Pattern (Sticker) - Set 75887 (Counterpart)
|
|
| Author: | StormChaser | | Posted: | Apr 12, 2018 23:00 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 3 Part 15 Black Legs Old
Comments from Submitter:
Already included in the minifigures
|
This request will not be approved because there appear to be 5 of these legs
in the set according to the set instructions and approval of this request would
drop the number to 3.
However, it does bring up an interesting point: the minifigures in the set are
incorrectly assembled. As Stefaan pointed out, some changes to the minifigure
parts would be appropriate. He suggests removing the figures and having only
the parts in the inventory and that's not a bad idea since the instructions
don't really show complete figures.
The other option would be the addition of a new figure to the catalog which is
assembled like this figure from the torso upwards:
but includes this part in black as the legs:
Then 2 of those would be included as figures as shown in the instructions and
the cowboy on the horse would have only his parts (torso, head, hat) in the inventory.
As for old029, the instructions don't show that figure assembled that way
and it could be marked for deletion.
|
|
| Author: | Hygrotus | | Posted: | Apr 12, 2018 15:32 | | Subject: | Re: Inventory Change Request for Set 8105-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| In Inventories Requests, jimbo4273 writes:
| | Please make changes to the following inventory:
* Add 1 Minifig exf015 Devastator - Pearl Light Gray Torso, Red Eyes
* Delete 1 Minifig exf009 Devastator - Trans-Red Torso, Red Eyes
Comments from Submitter:
The instructions and LEGO inventory page depicts a Devastator with a trans-red torso, but the set comes with a pearl light gray torso
|
I will accept this pearl light gray minifig addition but chanage it to alternate,
deletion of trans red one will not be accepted.
For the record (those messages in this thread will remain now):
Review of the set with exf015 (Pearl Light Gray)
https://www.youtube.com/watch?v=xZumqsnjY2s
Review of the set with exf009 (Trans Red)
https://www.youtube.com/watch?v=7U3nGXRyIkw
Marek
|
|
| Author: | SezaR | | Posted: | Apr 12, 2018 08:20 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
| There shouls be 5 of them. Currently y of them are listed. I just asked a collector
from Sweden.
I believe the windows 29 should be removed. Never saw them withput glass.
In Inventories Requests, elias3 writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 3 Part 15 Black Legs Old
Comments from Submitter:
Already included in the minifigures
|
Hi
No...
My source: instructions on Peeron!
there are 3 in use for the horse
http://www.peeron.com/scans/726-1/13
actually there is no minifig at all because all three head+hat+torso are separated
from the legs
count:
3x in white
3x in yellow
3x in blue
5x in black =
2x http://www.peeron.com/scans/726-1/9 and
3x http://www.peeron.com/scans/726-1/13
Don't know if there is/was a 3th legs part - as extra - to complete the 3th
minifig.
Isn't it better to remove the minifig and put all parts in the inventory
separate?
Stefaan
|
|
|
| Author: | elias3 | | Posted: | Apr 12, 2018 07:43 | | Subject: | Re: Inventory Change Request for Set 726-1 | | Viewed: | 31 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Delete 3 Part 15 Black Legs Old
Comments from Submitter:
Already included in the minifigures
|
Hi
No...
My source: instructions on Peeron!
there are 3 in use for the horse
http://www.peeron.com/scans/726-1/13
actually there is no minifig at all because all three head+hat+torso are separated
from the legs
count:
3x in white
3x in yellow
3x in blue
5x in black =
2x http://www.peeron.com/scans/726-1/9 and
3x http://www.peeron.com/scans/726-1/13
Don't know if there is/was a 3th legs part - as extra - to complete the 3th
minifig.
Isn't it better to remove the minifig and put all parts in the inventory
separate?
Stefaan
|
|
| Author: | Hygrotus | | Posted: | Apr 12, 2018 07:10 | | Subject: | Re: Inventory Change Request for Set 70165-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
| In Inventories Requests, samsam2 writes:
| | Please make changes to the following inventory:
* Add 1 Part 46212pb014 Trans-Light Blue Brick 1 x 2 x 5 without Side Supports with 'DNA TEST' and 'MOLECULE RESULT' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 46212pb015 Trans-Light Blue Brick 1 x 2 x 5 without Side Supports with 'ANALYSIS' and 'BRAIN ACTIVITY' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 30386pb07 Yellow Hinge Brick 1 x 2 Locking with Black Danger Stripes and 'AVA' on Clear Background Pattern on Both Sides (Stickers) - Set 70165 (Counterpart)
* Add 1 Part 30387pb015 Yellow Hinge Brick 1 x 4 Locking with Black Danger Stripes, Vents and 'RAF-165' on Clear Background Pattern on Both Sides (Stickers) - Set 70165 (Counterpart)
* Add 1 Part 57895pb048 Trans-Light Blue LegoGlass for Window 1 x 4 x 6 with Door Lock and 'LOCK' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 60581pb096 Trans-Light Blue Panel 1 x 4 x 3 with Side Supports - Hollow Studs with 'SATELLITE TRACKING' and Psyclone’s Flyer on Screen Pattern on Inside (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 59349pb137 Trans-Light Blue Panel 1 x 6 x 5 with Map, Computer Screen, Keyboard, 'AGENT PHOENIX' and 'SUSPECT' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 30602pb097 Trans-Light Blue Slope, Curved 2 x 2 Lip, No Studs with Silver and Black Circuitry Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 85984pb187 Black Slope 30 1 x 2 x 2/3 with Silver Ultra Agents Logo Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 13269pb003 Black Slope 45 6 x 4 Double / 33 (Train Roof) with Silver and Medium Azure Ultra Agents Logo Pattern (Sticker) - Set 70165 (Counterpart)
* Add 2 Part 3678bpb109 Black Slope 65 2 x 2 x 2 with Bottom Tube with Silver and Medium Azure Circuitry and Vents Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 30602pb098 Black Slope, Curved 2 x 2 Lip, No Studs with Silver Ultra Agents Logo and Vents Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 15068pb136 Dark Bluish Gray Slope, Curved 2 x 2 No Studs with Silver and Medium Azure Circuitry and Arrow Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 15068pb135 Black Slope, Curved 2 x 2 No Studs with Silver and Medium Azure Transformer Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 15068pb137 Black Slope, Curved 2 x 2 No Studs with Silver Ultra Agents Logo and 'QUAD ACCESS' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 15068pb138 Black Slope, Curved 2 x 2 No Studs with Stud Shooter and 'LOADING' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 93273pb083 Dark Bluish Gray Slope, Curved 4 x 1 Double No Studs with Lime, Silver and Black Circuitry, Microchips and Transformer Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 93273pb084 Dark Bluish Gray Slope, Curved 4 x 1 Double No Studs with Lime, Silver and Black Circuitry and Microchips Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 2431pb513 Black Tile 1 x 4 with Silver Ultra Agents Logo Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 6636pb159 Dark Bluish Gray Tile 1 x 6 with Silver and Medium Azure Circuitry and Vents Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 3069bpb639 Trans-Clear Tile 1 x 2 with Lime Liquid Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 87079pb478L Black Tile 2 x 4 with Silver and Medium Azure Ultra Agents Logo and Vents Left Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 87079pb478R Black Tile 2 x 4 with Silver and Medium Azure Ultra Agents Logo and Vents Right Pattern (Sticker) - Set 70165 (Counterpart)
|
What a challenge
Almost all were approved, but I found two issues
1. Part with sticker
should be 2 not 1, it is included on both legs on mech - instruction
book 1 page 18 and 21 and I see they are not mirrored. If it is OK then I will
adjust it manualy.
2. With this stickered part is bigger problem
it is part of minifig build, so shouldn't be separately in conterpart category
of this set inventory. It should be resolved as for example in this inventory:
so second minifig with this stickered part should be
added to catalog and then whole minifig added as counterpart. Like this:
[m=sw798]
[m=sw798s]
There is also example in Ultra Agents theme
from set
So I wll reject addition of this part to the inventory.
Marek
P.S. Now 6 sitckered parts only missing for this set
4 on part
one on and one on
|
|
| Author: | SezaR | | Posted: | Apr 12, 2018 06:33 | | Subject: | Inventory Change Request for Set 726-1 | | Viewed: | 36 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 3 Part 15 Black Legs Old
Comments from Submitter:
Already included in the minifigures
|
| Author: | samsam2 | | Posted: | Apr 11, 2018 22:30 | | Subject: | Re: Inventory Change Request for Set 70165-1 | | Viewed: | 29 times | | Topic: | Catalog | |
| For this part please change the colour of the image that I uploaded from DBG
to Black, thanks.
|
| Author: | jet91 | | Posted: | Apr 11, 2018 20:19 | | Subject: | Inventory Change Request for Set 7962-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb570R Light Bluish Gray Tile 1 x 2 with Yellow Markings and Blue Curved and Straight Lines on Dark Bluish Gray Background Pattern Model Right Side (Sticker) - Set 7962 (Counterpart)
|
|
| Author: | samsam2 | | Posted: | Apr 11, 2018 20:18 | | Subject: | Inventory Change Request for Set 70165-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 46212pb014 Trans-Light Blue Brick 1 x 2 x 5 without Side Supports with 'DNA TEST' and 'MOLECULE RESULT' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 46212pb015 Trans-Light Blue Brick 1 x 2 x 5 without Side Supports with 'ANALYSIS' and 'BRAIN ACTIVITY' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 30386pb07 Yellow Hinge Brick 1 x 2 Locking with Black Danger Stripes and 'AVA' on Clear Background Pattern on Both Sides (Stickers) - Set 70165 (Counterpart)
* Add 1 Part 30387pb015 Yellow Hinge Brick 1 x 4 Locking with Black Danger Stripes, Vents and 'RAF-165' on Clear Background Pattern on Both Sides (Stickers) - Set 70165 (Counterpart)
* Add 1 Part 57895pb048 Trans-Light Blue LegoGlass for Window 1 x 4 x 6 with Door Lock and 'LOCK' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 60581pb096 Trans-Light Blue Panel 1 x 4 x 3 with Side Supports - Hollow Studs with 'SATELLITE TRACKING' and Psyclone’s Flyer on Screen Pattern on Inside (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 59349pb137 Trans-Light Blue Panel 1 x 6 x 5 with Map, Computer Screen, Keyboard, 'AGENT PHOENIX' and 'SUSPECT' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 30602pb097 Trans-Light Blue Slope, Curved 2 x 2 Lip, No Studs with Silver and Black Circuitry Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 85984pb187 Black Slope 30 1 x 2 x 2/3 with Silver Ultra Agents Logo Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 13269pb003 Black Slope 45 6 x 4 Double / 33 (Train Roof) with Silver and Medium Azure Ultra Agents Logo Pattern (Sticker) - Set 70165 (Counterpart)
* Add 2 Part 3678bpb109 Black Slope 65 2 x 2 x 2 with Bottom Tube with Silver and Medium Azure Circuitry and Vents Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 30602pb098 Black Slope, Curved 2 x 2 Lip, No Studs with Silver Ultra Agents Logo and Vents Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 15068pb136 Dark Bluish Gray Slope, Curved 2 x 2 No Studs with Silver and Medium Azure Circuitry and Arrow Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 15068pb135 Black Slope, Curved 2 x 2 No Studs with Silver and Medium Azure Transformer Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 15068pb137 Black Slope, Curved 2 x 2 No Studs with Silver Ultra Agents Logo and 'QUAD ACCESS' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 15068pb138 Black Slope, Curved 2 x 2 No Studs with Stud Shooter and 'LOADING' Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 93273pb083 Dark Bluish Gray Slope, Curved 4 x 1 Double No Studs with Lime, Silver and Black Circuitry, Microchips and Transformer Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 93273pb084 Dark Bluish Gray Slope, Curved 4 x 1 Double No Studs with Lime, Silver and Black Circuitry and Microchips Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 2431pb513 Black Tile 1 x 4 with Silver Ultra Agents Logo Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 6636pb159 Dark Bluish Gray Tile 1 x 6 with Silver and Medium Azure Circuitry and Vents Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 3069bpb639 Trans-Clear Tile 1 x 2 with Lime Liquid Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 87079pb478L Black Tile 2 x 4 with Silver and Medium Azure Ultra Agents Logo and Vents Left Pattern (Sticker) - Set 70165 (Counterpart)
* Add 1 Part 87079pb478R Black Tile 2 x 4 with Silver and Medium Azure Ultra Agents Logo and Vents Right Pattern (Sticker) - Set 70165 (Counterpart)
|
|
| Author: | jet91 | | Posted: | Apr 11, 2018 20:16 | | Subject: | Inventory Change Request for Set 10215-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4445pb05L White Slope 45 2 x 8 with Red and White Triangle and Silver and Black Cockpit Controls Pattern Model Left Side (Sticker) - Set 10215 (Counterpart)
* Add 1 Part 4445pb05R White Slope 45 2 x 8 with Red and White Triangle nd Silver and Black Cockpit Controls Pattern Model Right Side (Sticker) - Set 10215 (Counterpart)
|
|
| Author: | samsam2 | | Posted: | Apr 11, 2018 19:37 | | Subject: | Inventory Change Request for Set 60151-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 93606pb072L Dark Blue Slope, Curved 4 x 2 No Studs with vents and Orange and Black stripe Pattern Left (Sticker) - Set 60151 (Counterpart)
* Add 1 Part 93606pb072R Dark Blue Slope, Curved 4 x 2 No Studs with vents and Orange and Black stripe Pattern Right (Sticker) - Set 60151 (Counterpart)
|
|
| Author: | Hygrotus | | Posted: | Apr 11, 2018 17:27 | | Subject: | Re: Inventory Change Request for Set 8105-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, jimbo4273 writes:
| | Please make changes to the following inventory:
* Add 1 Minifig exf015 Devastator - Pearl Light Gray Torso, Red Eyes
* Delete 1 Minifig exf009 Devastator - Trans-Red Torso, Red Eyes
Comments from Submitter:
The instructions and LEGO inventory page depicts a Devastator with a trans-red torso, but the set comes with a pearl light gray torso
|
I notice that almost exactly ten years ago (Mar 4, 2008) was reverse change
made on the same minifigs. But I do not have background why, message was purge
long time ago.
|
|
| Author: | normann1974 | | Posted: | Apr 11, 2018 04:23 | | Subject: | Re: Inventory Change Request for Set 8285-1 | | Viewed: | 62 times | | Topic: | Inventories Requests | |
| | | | | This other situation could be a case of multiple instructions. Check yours against
some of the others listed in databases. Brickset is a great resource for this
- there is a link there provided by Swooshable that will give you all the major
sources.
|
|
And also: All available scans of the building instructions have the same (IMHO
wrong) inventory on the last pages. Only one version seems to exist.
/Jan
|
|
| Author: | StormChaser | | Posted: | Apr 11, 2018 03:57 | | Subject: | Inventory Change Request for Set 970672-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4032b Black Plate, Round 2 x 2 with Axle Hole - X Opening
* Delete 2 Part 4032b White Plate, Round 2 x 2 with Axle Hole - X Opening
* Add 2 Part 4032 White Plate, Round 2 x 2 with Axle Hole
* Add 2 Part 4032 Black Plate, Round 2 x 2 with Axle Hole
Comments from Submitter:
Since inventory requests are saved permanently, please see the discussion here:
https://www.bricklink.com/message.asp?ID=1085733
|
|
| Author: | StormChaser | | Posted: | Apr 11, 2018 03:53 | | Subject: | Re: Inventory Change Request for Set 970089-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | Please make changes to the following inventory:
* Delete 2 Part 4032b Black Plate, Round 2 x 2 with Axle Hole - X Opening
* Delete 2 Part 4032b White Plate, Round 2 x 2 with Axle Hole - X Opening
* Add 2 Part 4032 White Plate, Round 2 x 2 with Axle Hole
* Add 2 Part 4032 Black Plate, Round 2 x 2 with Axle Hole
|
These are rather complicated requests. First, although this set doesn't
have a year of release, the correct year of release is very likely 1998 to coincide
with the release of this set:
This surmise is an educated guess based on my knowledge of Educational/Dacta
items. If true, then it would have been years before 4032b with the X opening
began to appear. The special elements set, BTW, is a rare set for which little
other evidence is available. The current inventory has no source.
There is a second set with identical contents which was released in 2002:
This is exactly the same set with a different item number. This is not uncommon
and I believe the catalog has a couple handfuls of duplicate E&D entries due
to different item numbers being used for the same items (this happened fairly
frequently for E&D sets). In other words, this is likely the exactly the same
set which had been around since 1998.
The X opening appears in this set, but the source is parts list. This set is
the earliest instance of the X opening 4032 on BrickLink along with this set:
However, for 9649-1, the X opening appears as an alternate and was added along
with bluish gray parts - a clear indication that the set used for the changes
came from 2004 or later. Considering all of the above, I believe that the X
opening did not first appear until 2003.
Regardless of all that, though, the X opening 4032 is a far less common variant
which should not have been added to this set inventory without having been confirmed
with an actual set.
However, these requests are essentially based on conjecture and not facts, so
I will leave them open for a few days to give people the opportunity to comment/object
(and I'm certainly not above having my own requests rejected or rejecting
them myself).
|
|
| Author: | StormChaser | | Posted: | Apr 11, 2018 03:19 | | Subject: | Inventory Change Request for Set 970089-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4032b Black Plate, Round 2 x 2 with Axle Hole - X Opening
* Delete 2 Part 4032b White Plate, Round 2 x 2 with Axle Hole - X Opening
* Add 2 Part 4032 White Plate, Round 2 x 2 with Axle Hole
* Add 2 Part 4032 Black Plate, Round 2 x 2 with Axle Hole
|
|
|
| Author: | jimbo4273 | | Posted: | Apr 10, 2018 19:04 | | Subject: | Inventory Change Request for Set 8105-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Minifig exf015 Devastator - Pearl Light Gray Torso, Red Eyes
* Delete 1 Minifig exf009 Devastator - Trans-Red Torso, Red Eyes
Comments from Submitter:
The instructions and LEGO inventory page depicts a Devastator with a trans-red torso, but the set comes with a pearl light gray torso
|
|
| Author: | normann1974 | | Posted: | Apr 10, 2018 17:24 | | Subject: | Inventory Change Request for Set 8416-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4032b Red Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 1)
* Change 2 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Red 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 1}
Comments from Submitter:
Source: MISB-based set that were never mixed with other bricks.
|
|
| Author: | normann1974 | | Posted: | Apr 10, 2018 15:26 | | Subject: | Re: Inventory Change Request for Set 8285-1 | | Viewed: | 52 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, normann1974 writes:
| | In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Change 2 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Source: MISB-based set that has never been mixed with other bricks.
|
Two questions have arised after re-counting my set before putting it up for sale:
1) Part
says that the "spring type" is "undetermined", but there are no variants to choose
between. Shouldn't there be some? Attached is a picture of the part in my
set.
|
Yes, what ever happened to 32181c01? There is a 32181c03:
Looks like we need one that has a spring.
| | 2) After counting this set, I have 4 left over bricks: 1x black 32054, 2x black
41677, 1x LBG 6538c, and one brick is missing: 1x 32278. These extra/missing
parts seems to make up for the differences between the BL inventory and Peeron's
(I've actually verified Peeron's inventory some years ago). It seems
that BL's inventory corresponds with the parts list in the building instructions
but apparently, there are inconsistencies between this and the actual contents
of the box. I've tried counting the number of bricks required in the building
instructions for those four parts, but there are six books, and I can't make
any of the counts in either of the two models match any of BL's or Peeron's
counts. But how should I handle these missing/extra parts? (I can see that the
part I'm missing was added to the BL inventory in 2012 but not find the reason
why).
/Jan
|
This other situation could be a case of multiple instructions. Check yours against
some of the others listed in databases. Brickset is a great resource for this
- there is a link there provided by Swooshable that will give you all the major
sources.
|
I already checked that but forgot to write it.
My instruction's seem to be identical to the ones on the LEGO website, and
the inventory count in book 3 are the same counts as BL's inventory (e.g.
37x 32278). But that list obviously don't match the actual contents of my
and the Peeron inventory authors box contents and the actual number of parts
needed for the build. I just recounted the number of 32278's used to build
the main model. It's 36 (my count for the secondary model is 35).
/Jan
|
|
| Author: | Admin_Russell | | Posted: | Apr 10, 2018 14:51 | | Subject: | Re: Inventory Change Request for Set 8285-1 | | Viewed: | 51 times | | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| | In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Change 2 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Source: MISB-based set that has never been mixed with other bricks.
|
Two questions have arised after re-counting my set before putting it up for sale:
1) Part
says that the "spring type" is "undetermined", but there are no variants to choose
between. Shouldn't there be some? Attached is a picture of the part in my
set.
|
Yes, what ever happened to 32181c01? There is a 32181c03:
Looks like we need one that has a spring.
| | 2) After counting this set, I have 4 left over bricks: 1x black 32054, 2x black
41677, 1x LBG 6538c, and one brick is missing: 1x 32278. These extra/missing
parts seems to make up for the differences between the BL inventory and Peeron's
(I've actually verified Peeron's inventory some years ago). It seems
that BL's inventory corresponds with the parts list in the building instructions
but apparently, there are inconsistencies between this and the actual contents
of the box. I've tried counting the number of bricks required in the building
instructions for those four parts, but there are six books, and I can't make
any of the counts in either of the two models match any of BL's or Peeron's
counts. But how should I handle these missing/extra parts? (I can see that the
part I'm missing was added to the BL inventory in 2012 but not find the reason
why).
/Jan
|
This other situation could be a case of multiple instructions. Check yours against
some of the others listed in databases. Brickset is a great resource for this
- there is a link there provided by Swooshable that will give you all the major
sources.
|
|
| Author: | normann1974 | | Posted: | Apr 10, 2018 14:20 | | Subject: | Re: Inventory Change Request for Set 8285-1 | | Viewed: | 40 times | | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Change 2 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Source: MISB-based set that has never been mixed with other bricks.
|
Two questions have arised after re-counting my set before putting it up for sale:
1) Part
says that the "spring type" is "undetermined", but there are no variants to choose
between. Shouldn't there be some? Attached is a picture of the part in my
set.
2) After counting this set, I have 4 left over bricks: 1x black 32054, 2x black
41677, 1x LBG 6538c, and one brick is missing: 1x 32278. These extra/missing
parts seems to make up for the differences between the BL inventory and Peeron's
(I've actually verified Peeron's inventory some years ago). It seems
that BL's inventory corresponds with the parts list in the building instructions
but apparently, there are inconsistencies between this and the actual contents
of the box. I've tried counting the number of bricks required in the building
instructions for those four parts, but there are six books, and I can't make
any of the counts in either of the two models match any of BL's or Peeron's
counts. But how should I handle these missing/extra parts? (I can see that the
part I'm missing was added to the BL inventory in 2012 but not find the reason
why).
/Jan
|
|
|
| Author: | normann1974 | | Posted: | Apr 10, 2018 13:51 | | Subject: | Inventory Change Request for Set 8285-1 | | Viewed: | 51 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Source: MISB-based set that has never been mixed with other bricks.
|
|
| Author: | Admin_Russell | | Posted: | Apr 10, 2018 13:50 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, randyf writes:
| | In a couple of the images in the upper-left corner you can definitely tell that
the palm trunks have the short connector:
|
Thanks for finding that. The short connector is what the original submitter
was wanting to add to the set and this along with maggiec's sealed set definitely
confirm it.
| | Therefore, I think all of the evidence found in this thread added to the image
is sufficient to prove that the alternate existed.
|
The alternate is where the concern lies. The question is whether the set ever
came with the long connector and that is what has yet to be convincingly demonstrated.
|
I'm glad some headway is being made on these palm trunks. When they first
appeared in the catalog, I couldn't make head or tail as to where they fit
into the inventory system.
|
|
| Author: | StormChaser | | Posted: | Apr 10, 2018 13:44 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| | In a couple of the images in the upper-left corner you can definitely tell that
the palm trunks have the short connector:
|
Thanks for finding that. The short connector is what the original submitter
was wanting to add to the set and this along with maggiec's sealed set definitely
confirm it.
| | Therefore, I think all of the evidence found in this thread added to the image
is sufficient to prove that the alternate existed.
|
The alternate is where the concern lies. The question is whether the set ever
came with the long connector and that is what has yet to be convincingly demonstrated.
|
|
| Author: | randyf | | Posted: | Apr 10, 2018 13:35 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, ParisianStore writes:
| | Please make changes to the following inventory:
* Change 6 Part Brown {2536 Plant, Tree Palm Trunk to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
Comments from Submitter:
I have bought the set 6411 on Ebay and the real palm trunk seems to be 2436b (empty hole, no slots inside).
All the parts are original because many of them were still clutched together and some of them are yellowed.
|
Unfortunately, I decided not to approve this request. I think you're probably
right and I'd like to get the undetermined entry out of the set inventory,
but there's no point in doing so if it's based on a source that I consider
unreliable.
If you find more reliable information in the future, then please resubmit the
request.
|
Robert -
I found a BrickShelf gallery that documents a sealed set being opened:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=268792
In a couple of the images in the upper-left corner you can definitely tell that
the palm trunks have the short connector:
http://www.brickshelf.com/gallery/Rober-to/Town/6411/6411g.jpg
http://www.brickshelf.com/gallery/Rober-to/Town/6411/6411i.jpg
Therefore, I think all of the evidence found in this thread added to the image
is sufficient to prove that the alternate existed.
Cheers,
Randy
|
|
| Author: | randyf | | Posted: | Apr 10, 2018 13:17 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, StormChaser writes:
| | I'll be looking through parts
|
While I'm thinking about it, terms like "Type 1" and "Type 2" are singularly
unhelpful. For example:
If I had a random Duplo hook, what about either catalog entry would let me know
which one I had? Nothing in the title, no notes, and no comparison images.
I think any catalog entries which specify an item is type 1 or type 2 should
be looked at more closely for possible improvement.
|
I tried changing a bunch of part names years ago that had "Type 1" or "Type 2",
etc. in them and all of them were rejected. I still think it is wholly uninformative
and useless to have such things in the names of parts.
Cheers,
Randy
|
|
| Author: | Admin_Russell | | Posted: | Apr 10, 2018 12:35 | | Subject: | Re: Inventory Change Request for Set 740-2 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| | In Inventories Requests, SezaR writes:
| | The seller gp73 have this item, bought in 1974 with its original packaging.
In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part 740 Light Gray Electric, Train 12V Transformer for 220V (Alternate) (match ID 1)
* Change 1 Part Blue 740 Electric, Train 12V Transformer for 220V {match ID 0 to 1}
|
|
Right, I uploaded the light gray picture.
Maybe 'various color' ? As we do by the minifigs.
Stefaan
|
Speaking of pictures, it would be great if someone could upload a better photo
of the blue one.
|
|
| Author: | CrazyChris | | Posted: | Apr 10, 2018 05:48 | | Subject: | Re: Inventory Change Request for Set 7824-1 | | Viewed: | 37 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Jojo writes:
| | Hello!
In Inventories Requests, StormChaser writes:
| | To anyone reading this in the future, since these messages are permanently saved:
the finger hinges for this set have been moved around, added, and deleted in
nearly every possible way. They're fine now. Leave them alone.
|
Regardless of how often the inventory for this set has been changed in the past,
both hollow and closed studes on these hinges are possible to be in this set.
This means both versions should be included in the inventory, one as regular,
one as alternate. Since closed studes were the original when this set was released,
hollow studs were the "alternate" done by Lego themselves. There you have it.
Bye
Jojo
|
I totally agree on that.
But in general, I‘ve given up on this issue.
Correcting the inventories could be done so fast and smoothly, if admins would
choose a better process...
|
|
| Author: | StormChaser | | Posted: | Apr 10, 2018 03:47 | | Subject: | Re: Inventory Change Request for Set 740-2 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| | We you list it as part, you can select the right color like the minfig torso
|
I thought that's what you may be referring to. The reason torsos (and many
other part assemblies) are inventoried this way is so that they can be easily
used in multiple inventories.
I don't believe variable color inventories are appropriate for sets in most
cases. It could be done, yes, but I think having the alternate color for parts
is more appropriate for most sets (including this one).
You may notice that even sets which could include a larger variety of colors
are not traditionally given a single variable-color part inventory:
And then sometimes you get only this (see inventory note):
| | As MISB set you don't know what you have inside, it can be blue or light
gray.
|
Indeed that's true and the alternate part in the inventory will allow sellers
to part out the set depending on what color they find.
|
|
| Author: | elias3 | | Posted: | Apr 10, 2018 03:34 | | Subject: | Re: Inventory Change Request for Set 740-2 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, elias3 writes:
| | Maybe 'various color' ? As we do by the minifigs.
|
I'm confused by what you're asking here. Can you elucidate?
|
Robert
In this inventory we have the 'blue' and/or the 'light gray'
one.
But if we use 1 part for the inv. as 'various color'.
We you list it as part, you can select the right color like the minfig torso
https://www.bricklink.com/v2/catalog/catalogitem.page?P=973&idColor=0#T=C&C=0
various color: (or no color)
https://www.bricklink.com/catalogItemInv.asp?P=973c02
As MISB set you don't know what you have inside, it can be blue or light
gray. (or maybe there is a color dot on the box as we seen on other sets at that
time)
Stefaan
|
|
| Author: | SezaR | | Posted: | Apr 10, 2018 03:11 | | Subject: | Re: Inventory Change Request for Set 740-2 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| About two weeks ago, I did some search and found few other auctions listing or
other photos of this gray transformer with the box of 740.
Otherwise, how did this gray transformer appear?
More important, please note that the blue era ended in 1979 and the gray era
began in 1980. However, it seems to me that the blue track-related parts had
already began to be replaced by their gray ones. For example, see
[p=bb93]
and
[p=bb141c01].
Their gray ones do not appear in any set. (Of course, I will work on them
)
Knowing this fact would make my future inventory requests much smoother.
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part 740 Light Gray Electric, Train 12V Transformer for 220V (Alternate) (match ID 1)
* Change 1 Part Blue 740 Electric, Train 12V Transformer for 220V {match ID 0 to 1}
|
At the time of this request, longtime member brasletty has a new set for sale
which also shows the light gray transformer (photo attached) The part in light
gray appears in no other set at this time, but multiple photos demonstrate its
existence and there are 7 listings of light gray for sale.
I have little doubt in the accuracy of this request and it has been approved.
|
|
|
|
| Author: | StormChaser | | Posted: | Apr 10, 2018 03:11 | | Subject: | Re: Inventory Change Request for Set 740-2 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| | Maybe 'various color' ? As we do by the minifigs.
|
I'm confused by what you're asking here. Can you elucidate?
|
| Author: | elias3 | | Posted: | Apr 10, 2018 03:02 | | Subject: | Re: Inventory Change Request for Set 740-2 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | The seller gp73 have this item, bought in 1974 with its original packaging.
In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part 740 Light Gray Electric, Train 12V Transformer for 220V (Alternate) (match ID 1)
* Change 1 Part Blue 740 Electric, Train 12V Transformer for 220V {match ID 0 to 1}
|
|
Right, I uploaded the light gray picture.
Maybe 'various color' ? As we do by the minifigs.
Stefaan
|
|
| Author: | StormChaser | | Posted: | Apr 10, 2018 02:59 | | Subject: | Re: Inventory Change Request for Set 740-2 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part 740 Light Gray Electric, Train 12V Transformer for 220V (Alternate) (match ID 1)
* Change 1 Part Blue 740 Electric, Train 12V Transformer for 220V {match ID 0 to 1}
|
At the time of this request, longtime member brasletty has a new set for sale
which also shows the light gray transformer (photo attached) The part in light
gray appears in no other set at this time, but multiple photos demonstrate its
existence and there are 7 listings of light gray for sale.
I have little doubt in the accuracy of this request and it has been approved.
|
|
|
| Author: | StormChaser | | Posted: | Apr 10, 2018 02:35 | | Subject: | Re: Inventory Change Request for Set 9980-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, LordSkylark writes:
| | I am curious. Are there any advantages to the administrators to having a separate
"delete" and "add" for an inventory instead of merely a "change"?
|
None that I'm aware of. It's just habit for me to submit change requests
that way.
|
| Author: | SezaR | | Posted: | Apr 9, 2018 20:05 | | Subject: | Re: Inventory Change Request for Set 740-2 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| The seller gp73 have this item, bought in 1974 with its original packaging.
In Inventories Requests, SezaR writes:
| | Please make changes to the following inventory:
* Add 1 Part 740 Light Gray Electric, Train 12V Transformer for 220V (Alternate) (match ID 1)
* Change 1 Part Blue 740 Electric, Train 12V Transformer for 220V {match ID 0 to 1}
|
|
|
| Author: | SezaR | | Posted: | Apr 9, 2018 20:03 | | Subject: | Inventory Change Request for Set 740-2 | | Viewed: | 37 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 740 Light Gray Electric, Train 12V Transformer for 220V (Alternate) (match ID 1)
* Change 1 Part Blue 740 Electric, Train 12V Transformer for 220V {match ID 0 to 1}
|
|
| Author: | normann1974 | | Posted: | Apr 9, 2018 17:20 | | Subject: | Re: Inventory Change Request for Set 7945-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Add 1 Part 60849 Yellow Minifig, Utensil Hose Nozzle Elaborate (Extra)
* Change 4 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 3 Part Red {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud / Hollow Stud}
Comments from Submitter:
Source: MISB-based set that were never mixed with other bricks.
|
In this inventory there is also 3794 in LBG color, can you also check it, you
only change white 3794
Marek
|
Sorry, I forgot this one in my request. It's also non-grooved. I made an
extra request for the LBG part:
https://www.bricklink.com/messageThread.asp?ID=235005
/Jan
|
|
| Author: | normann1974 | | Posted: | Apr 9, 2018 17:19 | | Subject: | Inventory Change Request for Set 7945-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
Forgot this one in my previous request: https://www.bricklink.com/message.asp?ID=1085390
|
|
| Author: | LordSkylark | | Posted: | Apr 9, 2018 14:22 | | Subject: | Re: Inventory Change Request for Set 9980-1 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | Please make changes to the following inventory:
* Delete 1 Minifig 4555pb126 Duplo Figure, Male, Blue Legs, Blue Top, Life Jacket, Red Cap, no White in Eyes pattern
* Add 1 Minifig 4555pb267 Duplo Figure, Male, Blue Legs, Blue Top, Life Jacket, Red Cap, with White in Eyes pattern
|
I am curious. Are there any advantages to the administrators to having a separate
"delete" and "add" for an inventory instead of merely a "change"?
Andrew
|
|
| Author: | elias3 | | Posted: | Apr 9, 2018 13:46 | | Subject: | Inventory Change Request for Set 4440-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 3684c Light Bluish Gray Slope 75 2 x 2 x 3 - Solid Studs (Alternate) (match ID 6)
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
* Change 1 Part Light Bluish Gray {3684 Slope 75 2 x 2 x 3 - Undetermined Stud Type to 3684c Slope 75 2 x 2 x 3 - Solid Studs} {match ID 6 to 0}
* Change 3 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
Comments from Submitter:
check undetermined type: my source set was and is still build up 1 time. 3794 just change because the catalog change was made to the undetermined type a few weeks ago. The black 3794 is the -b type, DBG and white 3794 are the -a type. For the slope 3684 it's the -c type.
|
|
| Author: | Hygrotus | | Posted: | Apr 9, 2018 13:31 | | Subject: | Re: Inventory Change Request for Set 7945-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Add 1 Part 60849 Yellow Minifig, Utensil Hose Nozzle Elaborate (Extra)
* Change 4 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 3 Part Red {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud / Hollow Stud}
Comments from Submitter:
Source: MISB-based set that were never mixed with other bricks.
|
In this inventory there is also 3794 in LBG color, can you also check it, you
only change white 3794
Marek
|
|
| Author: | elias3 | | Posted: | Apr 9, 2018 13:27 | | Subject: | Inventory Change Request for Set 10193-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 4599 Light Bluish Gray Tap 1 x 1 - Undetermined End (match ID 3)
* Change 5 Part Light Bluish Gray {3684 Slope 75 2 x 2 x 3 - Undetermined Stud Type to 3684a Slope 75 2 x 2 x 3 - Hollow Studs}
* Change 7 Part Reddish Brown {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud / Hollow Stud}
* Change 2 Part Light Bluish Gray 4599b Tap 1 x 1 without Hole in End {Alternate to Regular} {match ID 3 to 0}
Comments from Submitter:
check for undetermined types, my source is MIB (bags are closed)
|
|
| Author: | Admin_Russell | | Posted: | Apr 9, 2018 13:09 | | Subject: | Inventory Change Request for Set 6872-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 4085b Light Gray Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (Alternate) (match ID 3)
* Change 2 Part Light Gray 4085a Plate, Modified 1 x 1 with Clip Vertical - Type 1 (thin open O clip) {match ID 0 to 3}
Comments from Submitter:
The existence of the 'B' type clip has been confirmed with sealed set contents by the original submitter of this inventory.
|
|
| Author: | Admin_Russell | | Posted: | Apr 9, 2018 12:14 | | Subject: | Inventory Change Request for Set 70656-1 | | Viewed: | 36 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 64567 Black Minifig, Weapon Lightsaber Hilt Straight (Extra)
* Add 1 Part 21459 Flat Silver Minifig, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Extra)
* Add 1 Part 18654 Flat Silver Technic, Pin Connector Round 1L (Extra)
* Add 1 Part 54200 White Slope 30 1 x 1 x 2/3 (Extra)
Comments from Submitter:
From a sealed set.
|
|
| Author: | LordSkylark | | Posted: | Apr 9, 2018 11:48 | | Subject: | Inventory Change Request for Set 7597-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Red {60583 Brick, Modified 1 x 1 x 3 with 2 Clips Vertical - Undetermined Stud Type to 60583a Brick, Modified 1 x 1 x 3 with 2 Clips Vertical - Solid Stud}
Comments from Submitter:
I know for certain that this is correct. This is where I originally noticed that there were two variants and I submitted the versions in the catalog. So I can confidently confirm that both variants came in this set.
|
|
| Author: | normann1974 | | Posted: | Apr 9, 2018 11:02 | | Subject: | Inventory Change Request for Set 7945-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 60849 Yellow Minifig, Utensil Hose Nozzle Elaborate (Extra)
* Change 4 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 3 Part Red {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud / Hollow Stud}
Comments from Submitter:
Source: MISB-based set that were never mixed with other bricks.
|
|
| Author: | Jojo | | Posted: | Apr 9, 2018 08:02 | | Subject: | Re: Inventory Change Request for Set 7824-1 | | Viewed: | 38 times | | Topic: | Inventories Requests | |
| Hello!
FYI
In Inventories Requests, SezaR writes:
| | The problem of hinges is that they started to appear with hollow studs since
1987 but I believe they were in production since 1985. Some sets such as 7823,
7735 and 7745 come with hinges. But I have never seen them in any auction with
hinges of solid studs. (except for, 7745 a couple of times with 2* gray 2-finger
hinges, but not the other hinges in this set)
|
My copy of 7823 from 1986 (catalogue!) came with hollowly studded hinges:
https://steinwurf.wordpress.com/2015/08/16/container-kran-7823/
Kind Regards
Jojo
|
|
| Author: | StormChaser | | Posted: | Apr 9, 2018 04:21 | | Subject: | Inventory Change Request for Set 6411-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 6 Part Brown {2536 Plant, Tree Palm Trunk - Undetermined Type to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
Comments from Submitter:
Request was originally submitted by member ParisianStore. The source was a used set purchased on eBay and the request was denied based on the source.
The accuracy of the request was later confirmed by catalog administrator maggiec based on a sealed set. The original submitter should get credit for this change, but has not resubmitted the request.
It is possible, perhaps even likely, that this set also included 2536a at some point (possibly even a mixture of both in some sets). That has not been confirmed yet, though.
|
|
| Author: | StormChaser | | Posted: | Apr 9, 2018 04:07 | | Subject: | Re: Inventory Change Request for Set 9980-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | Please make changes to the following inventory:
|
|
|
| Author: | StormChaser | | Posted: | Apr 9, 2018 04:06 | | Subject: | Inventory Change Request for Set 9980-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Minifig 4555pb126 Duplo Figure, Male, Blue Legs, Blue Top, Life Jacket, Red Cap, no White in Eyes pattern
* Add 1 Minifig 4555pb267 Duplo Figure, Male, Blue Legs, Blue Top, Life Jacket, Red Cap, with White in Eyes pattern
|
|
| Author: | SezaR | | Posted: | Apr 8, 2018 20:17 | | Subject: | Re: Inventory Change Request for Set 122-1 | | Viewed: | 36 times | | Topic: | Inventories Requests | |
| Another one
In Inventories Requests, SezaR writes:
| | This set may need a couple of more changes. See attached few photos of a MIB
one:
In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, osborne10 writes:
| | Photo of set with box.
Inventories extras seen in photo.
Trainrim Train Rim can be seen is black in photo.
In Inventories Requests, SezaR writes:
| | I may be able to help. But, can the submitter kindly upload some photos of his
set with the box?
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, osborne10 writes:
| | Please make changes to the following inventory:
* Add 4 Part 7039 Red Wheel Old with 4 Studs (Extra)
* Add 2 Part x486a Black Tread Small - Old - Wedge Shaped Treads (Extra)
* Add 4 Part 132old Black Tire Smooth Old Style - Small (Extra)
* Add 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
|
These requests have been pending for a while.
Would appreciate any input from the other people here on BrickLink who have an
interest in classic trains.
|
|
|
Thank you for the image. These changes have been approved, except for the
one adding the black rims. These are already present in the inventory by way
of alternate.
|
|
|
|
|
| Author: | SezaR | | Posted: | Apr 8, 2018 20:13 | | Subject: | Re: Inventory Change Request for Set 122-1 | | Viewed: | 39 times | | Topic: | Inventories Requests | |
| This set may need a couple of more changes. See attached few photos of a MIB
one:
In Inventories Requests, Admin_Russell writes:
| | In Inventories Requests, osborne10 writes:
| | Photo of set with box.
Inventories extras seen in photo.
Trainrim Train Rim can be seen is black in photo.
In Inventories Requests, SezaR writes:
| | I may be able to help. But, can the submitter kindly upload some photos of his
set with the box?
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, osborne10 writes:
| | Please make changes to the following inventory:
* Add 4 Part 7039 Red Wheel Old with 4 Studs (Extra)
* Add 2 Part x486a Black Tread Small - Old - Wedge Shaped Treads (Extra)
* Add 4 Part 132old Black Tire Smooth Old Style - Small (Extra)
* Add 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
|
These requests have been pending for a while.
Would appreciate any input from the other people here on BrickLink who have an
interest in classic trains.
|
|
|
Thank you for the image. These changes have been approved, except for the
one adding the black rims. These are already present in the inventory by way
of alternate.
|
|
|
|
| Author: | Admin_Russell | | Posted: | Apr 8, 2018 19:55 | | Subject: | Re: Inventory Change Request for Set 122-1 | | Viewed: | 36 times | | Topic: | Inventories Requests | |
| In Inventories Requests, osborne10 writes:
| | Photo of set with box.
Inventories extras seen in photo.
Trainrim Train Rim can be seen is black in photo.
In Inventories Requests, SezaR writes:
| | I may be able to help. But, can the submitter kindly upload some photos of his
set with the box?
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, osborne10 writes:
| | Please make changes to the following inventory:
* Add 4 Part 7039 Red Wheel Old with 4 Studs (Extra)
* Add 2 Part x486a Black Tread Small - Old - Wedge Shaped Treads (Extra)
* Add 4 Part 132old Black Tire Smooth Old Style - Small (Extra)
* Add 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
|
These requests have been pending for a while.
Would appreciate any input from the other people here on BrickLink who have an
interest in classic trains.
|
|
|
Thank you for the image. These changes have been approved, except for the
one adding the black rims. These are already present in the inventory by way
of alternate.
|
|
| Author: | Admin_Russell | | Posted: | Apr 8, 2018 18:55 | | Subject: | Re: Inventory Change Request for Set 6872-1 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
| In Inventories Requests, el_gordo writes:
| | In Inventories Requests, Admin_Russell writes:
| | Normally old inventories with no source are unreliable when it comes to variants.
This particular submitter, though, is an expert on Classic Space, and when I
have contacted him in the past he has been able to defend all of his old inventories
with sealed set contents.
|
To be clear, my earlier comment wasn't meant to question the original submitter's
good faith; I realize it could have been inferred as such, which was unintended.
But to follow up on a previous remark, how can we know b-type is more common
(cf: rules) from a sample of one, anyway?
I can't dismiss the original inventory as innacurate; what I can do is ask
for further input from others to establish precedence between versions, thus
properly following the rules as they stand. I suppose a review of the rules themselves
would be out of the question?
In the meanwhile - please advise how to proceed. Should I add a-type as alternate,
for the sake of inclusion?
Pedro
|
I have cheanged the inventory to Type A for the moment. I'll send a note
to the original submitter to confirm the older part.
|
|
| Author: | osborne10 | | Posted: | Apr 8, 2018 18:24 | | Subject: | Re: Inventory Change Request for Set 122-1 | | Viewed: | 34 times | | Topic: | Inventories Requests | |
| Photo of set with box.
Inventories extras seen in photo.
Trainrim Train Rim can be seen is black in photo.
In Inventories Requests, SezaR writes:
| | I may be able to help. But, can the submitter kindly upload some photos of his
set with the box?
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, osborne10 writes:
| | Please make changes to the following inventory:
* Add 4 Part 7039 Red Wheel Old with 4 Studs (Extra)
* Add 2 Part x486a Black Tread Small - Old - Wedge Shaped Treads (Extra)
* Add 4 Part 132old Black Tire Smooth Old Style - Small (Extra)
* Add 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
|
These requests have been pending for a while.
Would appreciate any input from the other people here on BrickLink who have an
interest in classic trains.
|
|
|
|
|
| Author: | SezaR | | Posted: | Apr 8, 2018 17:18 | | Subject: | Re: Inventory Change Request for Set 7824-1 | | Viewed: | 30 times | | Topic: | Inventories Requests | |
| Hello
This set was released between 1983-90. The inventory was corrected as you said.
The problem of hinges is that they started to appear with hollow studs since
1987 but I believe they were in production since 1985. Some sets such as 7823,
7735 and 7745 come with hinges. But I have never seen them in any auction with
hinges of solid studs. (except for, 7745 a couple of times with 2* gray 2-finger
hinges, but not the other hinges in this set)
In Inventories Requests, Jojo writes:
| | Hello!
In Inventories Requests, StormChaser writes:
| | To anyone reading this in the future, since these messages are permanently saved:
the finger hinges for this set have been moved around, added, and deleted in
nearly every possible way. They're fine now. Leave them alone.
|
Regardless of how often the inventory for this set has been changed in the past,
both hollow and closed studes on these hinges are possible to be in this set.
This means both versions should be included in the inventory, one as regular,
one as alternate. Since closed studes were the original when this set was released,
hollow studs were the "alternate" done by Lego themselves. There you have it.
Bye
Jojo
|
|
|
| Author: | Hygrotus | | Posted: | Apr 8, 2018 16:48 | | Subject: | Inventory Change Request for Set 40298-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2431pb514 Black Tile 1 x 4 with 'DJ' Pattern (Sticker) - Set 40298 (Counterpart)
|
|
| Author: | Jojo | | Posted: | Apr 8, 2018 16:27 | | Subject: | Re: Inventory Change Request for Set 7824-1 | | Viewed: | 31 times | | Topic: | Inventories Requests | |
| Hello!
In Inventories Requests, StormChaser writes:
| | To anyone reading this in the future, since these messages are permanently saved:
the finger hinges for this set have been moved around, added, and deleted in
nearly every possible way. They're fine now. Leave them alone.
|
Regardless of how often the inventory for this set has been changed in the past,
both hollow and closed studes on these hinges are possible to be in this set.
This means both versions should be included in the inventory, one as regular,
one as alternate. Since closed studes were the original when this set was released,
hollow studs were the "alternate" done by Lego themselves. There you have it.
Bye
Jojo
|
|
| Author: | stecre | | Posted: | Apr 8, 2018 15:22 | | Subject: | Inventory Change Request for Set 10237-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 15571 Black Slope 45 2 x 1 Triple with Bottom Stud Holder (Alternate) (match ID 9)
* Change 4 Part Black 3048c Slope 45 2 x 1 Triple with Inside Bar {match ID 0 to 9}
Comments from Submitter:
This part variant is present in my version of the set which I have owned from new.
|
|
| Author: | elias3 | | Posted: | Apr 8, 2018 14:04 | | Subject: | Re: Inventory Change Request for Set 7824-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| | In Inventories Requests, SezaR writes:
| | Good to know that I an not alone in believing that hinges with hollow studs appeared
first in 1985! Many say 1987.
The sets 7735, 7745 and 7817 fro; 1985 and 7823 and 7839 fro; 1986 are listed
with hinges with solid studs. I have failed seeing them on various auction sites
coming with hinges of solid stud (not even once)
My inventory change request to add hinges with hollow studs as alternative to
7735 from 1985-90 was rejected.
In Inventories Requests, normann1974 writes:
| | In Inventories Requests, SezaR writes:
| | I know that the hinges with hollow studs started to appear in instructions since
1987 but It seems to me that they were in production since 1985.
What do you know about hinges?
|
Some time ago, I made some changes to old space sets regarding these hinges.
Here are my findings: https://www.bricklink.com/messageThread.asp?ID=221772
So 1985 is also the first year of hollow studs in my findings.
Set 6844 (1983): Solid studs
Set 6928 (1984): Solid studs
Set 6872 (1985): Hollow studs
Set 6055 (1985): Hollow studs
/Jan
|
|
All I know are the release years of the sets, so actually I can't prove that
1985 is the year that the hollow studs made their first appearance. But they
show up in sets that were first released in 1985. My sets might be from a later
production. I don't how for how many years each set were produced.
/Jan
|
Hi
check this set inventory from 1986:
the white color hinge 4275 never found as 4275a type, same for the white but
the 4276 started in 1987 sets
Stefaan
|
|
| Author: | jethroo | | Posted: | Apr 8, 2018 12:19 | | Subject: | Inventory Change Request for Set 10246-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 3068bpb1105 White Tile 2 x 2 with 'THE LEGO NEWS' and 'The greatest hero ever!' Pattern (match ID 2)
* Change 4 Part White 3068bpb0431 Tile 2 x 2 with Newspaper 'THE LEGO NEWS', 'volume 3' and 'The greatest LEGO hero ever!' Pattern {match ID 0 to 2}
Comments from Submitter:
just building this from a sealed box and the sets comes with the alternate newspaper version
|
|
| Author: | StormChaser | | Posted: | Apr 7, 2018 10:08 | | Subject: | Re: Inventory Change Request for Set 8637-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| | If you're in doubt which color the hoses are, why would you choose Flat Silver
instead of PLG?
|
Primarily because you said:
| | I bought this set in a large lot of sets.
|
You can't know if the parts in this set have been tampered with. Also, flat
silver makes more sense when looking at the set photo - these parts are clearly
intended to be silvery to accent the metallic silver parts in the set.
Further, there is some debate over whether PLG and flat silver are officially
different colors or merely variations in what TLG intended to be the same color.
You'll notice that this part only appears in 1 set in PLG:
and this only in 4 sets:
So the parts appear in a combined total of 5 sets in PLG, but in a combined total
of 40 sets in flat silver.
|
|
| Author: | Hygrotus | | Posted: | Apr 7, 2018 05:10 | | Subject: | Re: Inventory Change Request for Set 21144-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, Hygrotus writes:
| | BTW this set particular set, did you look also at the horse in this instruction
its assembly has the head added at penultimate step, so bags are aded before
whole assembly is completed. It not yet added but it's pending
without photo currently.
|
Yes, I see what you're saying.
It's a good time to update this page:
https://www.bricklink.com/help.asp?helpID=205
It doesn't address this situation at all. We have the ability to update
the page and I think we should.
|
Agreed
Marek
|
|
| Author: | normann1974 | | Posted: | Apr 7, 2018 04:57 | | Subject: | Re: Inventory Change Request for Set 7824-1 | | Viewed: | 30 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | Good to know that I an not alone in believing that hinges with hollow studs appeared
first in 1985! Many say 1987.
The sets 7735, 7745 and 7817 fro; 1985 and 7823 and 7839 fro; 1986 are listed
with hinges with solid studs. I have failed seeing them on various auction sites
coming with hinges of solid stud (not even once)
My inventory change request to add hinges with hollow studs as alternative to
7735 from 1985-90 was rejected.
In Inventories Requests, normann1974 writes:
| | In Inventories Requests, SezaR writes:
| | I know that the hinges with hollow studs started to appear in instructions since
1987 but It seems to me that they were in production since 1985.
What do you know about hinges?
|
Some time ago, I made some changes to old space sets regarding these hinges.
Here are my findings: https://www.bricklink.com/messageThread.asp?ID=221772
So 1985 is also the first year of hollow studs in my findings.
Set 6844 (1983): Solid studs
Set 6928 (1984): Solid studs
Set 6872 (1985): Hollow studs
Set 6055 (1985): Hollow studs
/Jan
|
|
All I know are the release years of the sets, so actually I can't prove that
1985 is the year that the hollow studs made their first appearance. But they
show up in sets that were first released in 1985. My sets might be from a later
production. I don't how for how many years each set were produced.
/Jan
|
|
| Author: | normann1974 | | Posted: | Apr 7, 2018 04:51 | | Subject: | Re: Inventory Change Request for Set 8637-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Add 2 Part 78c07 Pearl Light Gray Hose, Ribbed 7mm D. 7L (Alternate) (match ID 2)
* Change 2 Part {Metallic Silver to Flat Silver} 78c07 Hose, Ribbed 7mm D. 7L {match ID 0 to 2}
* Change 1 Part {Metallic Silver to Pearl Light Gray} 78c11 Hose, Ribbed 7mm D. 11L
|
Okay, here's what I did. I approved your requests (except for adding the
alternate) and then changed the colors of all the ribbed hoses in this set to
flat silver. I did this because in large official images of the set all three
hoses appear to be the same color (I also submitted the largest possible image
of the set to the catalog).
The PCC you mentioned for the 11L hose is shared by PLG and flat silver on BrickLink,
BTW, so either could be correct. I also updated the ribbed hoses in the extra
parts section to flat silver for this set.
This changes may not be correct, but I think the only way to know for sure is
to check a brand new set.
|
If you're in doubt which color the hoses are, why would you choose Flat Silver
instead of PLG? I've argued that they're PLG and I believe my image shows
it. If not convinced, I've now taken another picture to show the color differences.
On top is some flat silver parts (the tile only exists in Flat Silver and it
comes from set 10232), including the short hose found in my spare parts.
On the bottom are PLG parts (including one of the hoses that must belong to set
8637).
In other words, I still believe that PLG is the correct color of the hoses in
this set.
/Jan
|
|
|
| Author: | SezaR | | Posted: | Apr 7, 2018 03:46 | | Subject: | Re: Inventory Change Request for Set 122-1 | | Viewed: | 34 times | | Topic: | Inventories Requests | |
| I may be able to help. But, can the submitter kindly upload some photos of his
set with the box?
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, osborne10 writes:
| | Please make changes to the following inventory:
* Add 4 Part 7039 Red Wheel Old with 4 Studs (Extra)
* Add 2 Part x486a Black Tread Small - Old - Wedge Shaped Treads (Extra)
* Add 4 Part 132old Black Tire Smooth Old Style - Small (Extra)
* Add 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
|
These requests have been pending for a while.
Would appreciate any input from the other people here on BrickLink who have an
interest in classic trains.
|
|
|
| Author: | SezaR | | Posted: | Apr 7, 2018 03:35 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
| Dan had a particular way in giving marks for each inventory change reqeust. He
told me this himself in one of my recent dreams.
He gives some weight to each inv. change requests in a way that if the inv. change
is for an old set, the weight is more than 100 times than if an inv. change request
is added for some part like a jumper with/without groove. Specially, if the inv.
change is submitted for a set that had not have any change for years and that
the submitted h has suffered some grifes from admins, then the weight would be
200.
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, SezaR writes:
| | It will be
more than 100 inventory change requests. I guess my name and Lego.12vtrains'
one should then be added to the Guinness book of World Records?
|
No, 100 change requests won't get you there. See this list of contributors:
https://www.bricklink.com/catalogMembers.asp?viewAll=R
|
|
|
| Author: | SezaR | | Posted: | Apr 7, 2018 03:07 | | Subject: | Re: Inventory Change Request for Set 7824-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
| Good to know that I an not alone in believing that hinges with hollow studs appeared
first in 1985! Many say 1987.
The sets 7735, 7745 and 7817 fro; 1985 and 7823 and 7839 fro; 1986 are listed
with hinges with solid studs. I have failed seeing them on various auction sites
coming with hinges of solid stud (not even once)
My inventory change request to add hinges with hollow studs as alternative to
7735 from 1985-90 was rejected.
In Inventories Requests, normann1974 writes:
| | In Inventories Requests, SezaR writes:
| | I know that the hinges with hollow studs started to appear in instructions since
1987 but It seems to me that they were in production since 1985.
What do you know about hinges?
|
Some time ago, I made some changes to old space sets regarding these hinges.
Here are my findings: https://www.bricklink.com/messageThread.asp?ID=221772
So 1985 is also the first year of hollow studs in my findings.
Set 6844 (1983): Solid studs
Set 6928 (1984): Solid studs
Set 6872 (1985): Hollow studs
Set 6055 (1985): Hollow studs
/Jan
|
|
|
| Author: | StormChaser | | Posted: | Apr 7, 2018 03:05 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 24 times | | Topic: | Inventories Requests | |
| In Inventories Requests, SezaR writes:
| | It will be
more than 100 inventory change requests. I guess my name and Lego.12vtrains'
one should then be added to the Guinness book of World Records?
|
No, 100 change requests won't get you there. See this list of contributors:
https://www.bricklink.com/catalogMembers.asp?viewAll=R
|
|
| Author: | SezaR | | Posted: | Apr 7, 2018 03:02 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
| I heard somebody has been knocking my door.
Our excel file consists of 31 sheets for 31 sets, each consisting of some parts
in one of the following status:
1) need further investigation (we don't know yet if the part has to be added
to the inventory of that set)
2) we know that the part has to be added (or removed) and we have found enough
evidence (so once it is possible, the inventory change can be submitted)
3) we know and we are sure that the part has to be added to the inventory (or
removed from the inv.) but we need more evidence to prove it to Stormchaser/admin_Russel/viejos
If this inventory change is going to be approved, then I can assume we can remove
the third category from my excel file and submit them right away. It will be
more than 100 inventory change requests. I guess my name and Lego.12vtrains'
one should then be added to the Guinness book of World Records?
In Inventories Requests, StormChaser writes:
| | In Inventories Requests, maggiec writes:
| | My gut feeling is that both variations appeared in Paradisa sets, and I'd
probably have them as alternates, but I can understand if you want to wait for
more definitive evidence.
|
I imagine you're very likely right, but I'd feel bad about adding them
as alternates based on a hunch after all the grief I've given SezaR over
proving things.
|
|
|
| Author: | StormChaser | | Posted: | Apr 7, 2018 00:00 | | Subject: | Re: Inventory Change Request for Set 122-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
| In Inventories Requests, osborne10 writes:
| | Please make changes to the following inventory:
* Add 4 Part 7039 Red Wheel Old with 4 Studs (Extra)
* Add 2 Part x486a Black Tread Small - Old - Wedge Shaped Treads (Extra)
* Add 4 Part 132old Black Tire Smooth Old Style - Small (Extra)
* Add 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels
|
These requests have been pending for a while.
Would appreciate any input from the other people here on BrickLink who have an
interest in classic trains.
|
|
| Author: | StormChaser | | Posted: | Apr 6, 2018 23:48 | | Subject: | Re: Inventory Change Request for Set 21144-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| | BTW this set particular set, did you look also at the horse in this instruction
its assembly has the head added at penultimate step, so bags are aded before
whole assembly is completed. It not yet added but it's pending
without photo currently.
|
Yes, I see what you're saying.
It's a good time to update this page:
https://www.bricklink.com/help.asp?helpID=205
It doesn't address this situation at all. We have the ability to update
the page and I think we should.
|
|
|
| Author: | StormChaser | | Posted: | Apr 6, 2018 23:40 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
| In Inventories Requests, maggiec writes:
| | My gut feeling is that both variations appeared in Paradisa sets, and I'd
probably have them as alternates, but I can understand if you want to wait for
more definitive evidence.
|
I imagine you're very likely right, but I'd feel bad about adding them
as alternates based on a hunch after all the grief I've given SezaR over
proving things.
|
|
| Author: | StormChaser | | Posted: | Apr 6, 2018 23:23 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, maggiec writes:
| | Aha, so when I took my Poolside Paradise back to the basement, I found a sealed
Sand Dollar Café. So lifting up the flap I can see that three of the segments
are 2536b (I can't make out the others). That should be enough to show that
6411 did come with the B-type.
|
That's good enough for me. Thank you for braving the darkness twice.
ParisianStore, if you'll resubmit the request it will be approved. If you
haven't done so in a day or two, then I'll make the changes you requested
myself. Sorry . . . I rejected your requests too soon.
|
|
| Author: | maggiec | | Posted: | Apr 6, 2018 23:17 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, ParisianStore writes:
| | Please make changes to the following inventory:
* Change 6 Part Brown {2536 Plant, Tree Palm Trunk to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
Comments from Submitter:
I have bought the set 6411 on Ebay and the real palm trunk seems to be 2436b (empty hole, no slots inside).
All the parts are original because many of them were still clutched together and some of them are yellowed.
|
Unfortunately, I decided not to approve this request. I think you're probably
right and I'd like to get the undetermined entry out of the set inventory,
but there's no point in doing so if it's based on a source that I consider
unreliable.
If you find more reliable information in the future, then please resubmit the
request.
|
Aha, so when I took my Poolside Paradise back to the basement, I found a sealed
Sand Dollar Café. So lifting up the flap I can see that three of the segments
are 2536b (I can't make out the others). That should be enough to show that
6411 did come with the B-type.
Maggie
|
|
| Author: | maggiec | | Posted: | Apr 6, 2018 23:05 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 29 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, maggiec writes:
| | but I did find three open
|
Thanks for checking! I updated the inventory of that set to 2536a, although
I didn't put 2536b as an alternate. If you think it would be reasonable
to include the alternate also, then let me know and I can do it.
|
Okay, so I went down to the basement (which I hate to do after dark even though
it's just as dark down there during midday) to take a look at a sealed one
in my shop figuring I'd find 2536b, as these sets were from a later run purchased
from KB Toy Liquidators a year or two after they were at other stores, but the
four trunk segments I can see through the window under the flap are all 2536a.
My gut feeling is that both variations appeared in Paradisa sets, and I'd
probably have them as alternates, but I can understand if you want to wait for
more definitive evidence.
|
|
| Author: | StormChaser | | Posted: | Apr 6, 2018 23:03 | | Subject: | Re: Inventory Change Request for Set 8637-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
| In Inventories Requests, normann1974 writes:
| | Please make changes to the following inventory:
* Add 2 Part 78c07 Pearl Light Gray Hose, Ribbed 7mm D. 7L (Alternate) (match ID 2)
* Change 2 Part {Metallic Silver to Flat Silver} 78c07 Hose, Ribbed 7mm D. 7L {match ID 0 to 2}
* Change 1 Part {Metallic Silver to Pearl Light Gray} 78c11 Hose, Ribbed 7mm D. 11L
|
Okay, here's what I did. I approved your requests (except for adding the
alternate) and then changed the colors of all the ribbed hoses in this set to
flat silver. I did this because in large official images of the set all three
hoses appear to be the same color (I also submitted the largest possible image
of the set to the catalog).
The PCC you mentioned for the 11L hose is shared by PLG and flat silver on BrickLink,
BTW, so either could be correct. I also updated the ribbed hoses in the extra
parts section to flat silver for this set.
This changes may not be correct, but I think the only way to know for sure is
to check a brand new set.
|
|
| Author: | StormChaser | | Posted: | Apr 6, 2018 22:45 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
| In Inventories Requests, ParisianStore writes:
| | Please make changes to the following inventory:
* Change 6 Part Brown {2536 Plant, Tree Palm Trunk to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
Comments from Submitter:
I have bought the set 6411 on Ebay and the real palm trunk seems to be 2436b (empty hole, no slots inside).
All the parts are original because many of them were still clutched together and some of them are yellowed.
|
Unfortunately, I decided not to approve this request. I think you're probably
right and I'd like to get the undetermined entry out of the set inventory,
but there's no point in doing so if it's based on a source that I consider
unreliable.
If you find more reliable information in the future, then please resubmit the
request.
|
|
| Author: | StormChaser | | Posted: | Apr 6, 2018 22:38 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, maggiec writes:
| | but I did find three open
|
Thanks for checking! I updated the inventory of that set to 2536a, although
I didn't put 2536b as an alternate. If you think it would be reasonable
to include the alternate also, then let me know and I can do it.
|
|
| Author: | StormChaser | | Posted: | Apr 6, 2018 22:33 | | Subject: | Inventory Change Request for Set 6416-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 6 Part 2536 Brown Plant, Tree Palm Trunk - Undetermined Type
* Add 6 Part 2536a Brown Plant, Tree Palm Trunk - Long Connector
Comments from Submitter:
Confirmed by catalog administrator maggiec in a sealed set purchased new. Two other copies of the same set owned by Maggie contained 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole. One copy had 3 each of 2536a and 2536b and the other copy had all 2536b.
Part 2536b was likely an alternate for this set, but the origin of Maggie's other two sets is not as certain. Therefore, I'm not adding it as an alternate at this time.
|
|
| Author: | StormChaser | | Posted: | Apr 6, 2018 21:33 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| In Inventories Requests, LordSkylark writes:
| | Would it also be good to mark more of the undetermined entries for deletion?
(As long as they have both variants now listed.)
|
Some don't even appear in sets. Three examples:
* | | 4215 Panel 1 x 4 x 3 (Undetermined Type)
Parts: Panel
Marked for Deletion |
[P=bb12v]
|
|
| Author: | StormChaser | | Posted: | Apr 6, 2018 21:28 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | I'll be looking through parts
|
While I'm thinking about it, terms like "Type 1" and "Type 2" are singularly
unhelpful. For example:
If I had a random Duplo hook, what about either catalog entry would let me know
which one I had? Nothing in the title, no notes, and no comparison images.
I think any catalog entries which specify an item is type 1 or type 2 should
be looked at more closely for possible improvement.
|
|
| Author: | StormChaser | | Posted: | Apr 6, 2018 21:22 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 25 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | I'll be looking through parts
today and submitting title change requests for any other parts like this which
are undetermined, but don't state that in the title.
|
Is this an undetermined entry or am I missing something?
Looks like it may have been replaced by:
If it ain't so, then the first one probably needs a more descriptive title
because the photo is no help whatsoever.
|
|
| Author: | ParisianStore | | Posted: | Apr 6, 2018 16:37 | | Subject: | Re: Inventory Change Request for Set 6411-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, StormChaser writes:
| | In Inventories Requests, ParisianStore writes:
| | Please make changes to the following inventory:
* Change 6 Part Brown {2536 Plant, Tree Palm Trunk to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
Comments from Submitter:
I have bought the set 6411 on Ebay and the real palm trunk seems to be 2436b (empty hole, no slots inside).
All the parts are original because many of them were still clutched together and some of them are yellowed.
|
I'm torn on this one between my desire to get the undetermined entries out
of set inventories and the knowledge that used sets on eBay are not reliable
sources.
I did submit a catalog change request to change the title of
to show that it was an undetermined entry. I'll be looking through parts
today and submitting title change requests for any other parts like this which
are undetermined, but don't state that in the title.
|
Ok, no problem, do the best you decide. I said how I got this set because I think
these pieces are really the original ones. The set is nearly complete and the
pieces seem to be the one from the real box (yellow pieces, used faces...), so
I think the tree is also the real one. But of course, it can have been replaced
by a tree from another box, I can not be sure. And for example, in the tree I
have received, there are only 5 segments, which means that one of them has been
removed (or the current inventory is wrong).
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
