BrickLink Discussion Forum

Status:

Open

Please make changes to the following inventory:

8105-1 (Inv) Iron Condor
133 Parts, 1 Minifigure, 2007
Sets: Exo-Force

* Add 1 Minifig exf015 Devastator - Pearl Light Gray Torso, Red Eyes
* Delete 1 Minifig exf009 Devastator - Trans-Red Torso, Red Eyes

Comments from Submitter:
The instructions and LEGO inventory page depicts a Devastator with a trans-red torso, but the set comes with a pearl light gray torso

Author:

normann1974

Posted:

Apr 10, 2018 17:24

Subject:

Inventory Change Request for Set 8416-1

Viewed:

34 times

Topic:

Status:

Open

Please make changes to the following inventory:

8416-1 (Inv) Forklift
729 Parts, 2005
Sets: Technic: Model: Construction

* Add 1 Part 4032b Red Plate, Round 2 x 2 with Axle Hole - X Opening (Alternate) (match ID 1)
* Change 2 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part Red 4032 Plate, Round 2 x 2 with Axle Hole {match ID 0 to 1}

Comments from Submitter:
Source: MISB-based set that were never mixed with other bricks.

Author:

normann1974

Posted:

Apr 10, 2018 15:26

Subject:

Re: Inventory Change Request for Set 8285-1

Viewed:

52 times

Topic:

In Inventories Requests, Admin_Russell writes:

In Inventories Requests, normann1974 writes:

Please make changes to the following inventory:

8285-1 (Inv) Tow Truck
1879 Parts, 2006
Sets: Technic: Model: Traffic

* Change 2 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Comments from Submitter:
Source: MISB-based set that has never been mixed with other bricks.

Two questions have arised after re-counting my set before putting it up for sale:

1) Part

32181c02 Technic, Shock Absorber 10L Damped (Undetermined Type)
Parts: Technic, Shock Absorber
Marked for Deletion

says that the "spring type" is "undetermined", but there are no variants to choose
between. Shouldn't there be some? Attached is a picture of the part in my
set.

Yes, what ever happened to 32181c01? There is a 32181c03:

32181c03 (Inv) Technic, Shock Absorber 10L Damped - No Spring
Parts: Technic, Shock Absorber

Looks like we need one that has a spring.

2) After counting this set, I have 4 left over bricks: 1x black 32054, 2x black
41677, 1x LBG 6538c, and one brick is missing: 1x 32278. These extra/missing
parts seems to make up for the differences between the BL inventory and Peeron's
(I've actually verified Peeron's inventory some years ago). It seems
that BL's inventory corresponds with the parts list in the building instructions
but apparently, there are inconsistencies between this and the actual contents
of the box. I've tried counting the number of bricks required in the building
instructions for those four parts, but there are six books, and I can't make
any of the counts in either of the two models match any of BL's or Peeron's
counts. But how should I handle these missing/extra parts? (I can see that the
part I'm missing was added to the BL inventory in 2012 but not find the reason
why).

32054 Technic, Pin 3L with Friction Ridges and Stop Bush
Parts: Technic, Pin

41677 Technic, Liftarm Thin 1 x 2 - Axle Holes
Parts: Technic, Liftarm

6538c Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Parts: Technic, Connector

32278 Technic, Liftarm Thick 1 x 15
Parts: Technic, Liftarm

/Jan

This other situation could be a case of multiple instructions. Check yours against
some of the others listed in databases. Brickset is a great resource for this
- there is a link there provided by Swooshable that will give you all the major
sources.

I already checked that but forgot to write it.

My instruction's seem to be identical to the ones on the LEGO website, and
the inventory count in book 3 are the same counts as BL's inventory (e.g.
37x 32278). But that list obviously don't match the actual contents of my
and the Peeron inventory authors box contents and the actual number of parts
needed for the build. I just recounted the number of 32278's used to build
the main model. It's 36 (my count for the secondary model is 35).

/Jan

Author:

Admin_Russell

Posted:

Apr 10, 2018 14:51

Subject:

Re: Inventory Change Request for Set 8285-1

Viewed:

50 times

Topic:

In Inventories Requests, normann1974 writes:

Please make changes to the following inventory:

8285-1 (Inv) Tow Truck
1879 Parts, 2006
Sets: Technic: Model: Traffic

Two questions have arised after re-counting my set before putting it up for sale:

1) Part

32181c02 Technic, Shock Absorber 10L Damped (Undetermined Type)
Parts: Technic, Shock Absorber
Marked for Deletion

says that the "spring type" is "undetermined", but there are no variants to choose
between. Shouldn't there be some? Attached is a picture of the part in my
set.

Yes, what ever happened to 32181c01? There is a 32181c03:

32181c03 (Inv) Technic, Shock Absorber 10L Damped - No Spring
Parts: Technic, Shock Absorber

Looks like we need one that has a spring.

32054 Technic, Pin 3L with Friction Ridges and Stop Bush
Parts: Technic, Pin

41677 Technic, Liftarm Thin 1 x 2 - Axle Holes
Parts: Technic, Liftarm

6538c Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Parts: Technic, Connector

32278 Technic, Liftarm Thick 1 x 15
Parts: Technic, Liftarm

/Jan

Author:

normann1974

Posted:

Apr 10, 2018 14:20

Subject:

Re: Inventory Change Request for Set 8285-1

Viewed:

40 times

Topic:

In Inventories Requests, normann1974 writes:

Please make changes to the following inventory:

8285-1 (Inv) Tow Truck
1879 Parts, 2006
Sets: Technic: Model: Traffic

Two questions have arised after re-counting my set before putting it up for sale:

1) Part

32181c02 Technic, Shock Absorber 10L Damped (Undetermined Type)
Parts: Technic, Shock Absorber
Marked for Deletion

says that the "spring type" is "undetermined", but there are no variants to choose
between. Shouldn't there be some? Attached is a picture of the part in my
set.

2) After counting this set, I have 4 left over bricks: 1x black 32054, 2x black
41677, 1x LBG 6538c, and one brick is missing: 1x 32278. These extra/missing
parts seems to make up for the differences between the BL inventory and Peeron's
(I've actually verified Peeron's inventory some years ago). It seems
that BL's inventory corresponds with the parts list in the building instructions
but apparently, there are inconsistencies between this and the actual contents
of the box. I've tried counting the number of bricks required in the building
instructions for those four parts, but there are six books, and I can't make
any of the counts in either of the two models match any of BL's or Peeron's
counts. But how should I handle these missing/extra parts? (I can see that the
part I'm missing was added to the BL inventory in 2012 but not find the reason
why).

32054 Technic, Pin 3L with Friction Ridges and Stop Bush
Parts: Technic, Pin

41677 Technic, Liftarm Thin 1 x 2 - Axle Holes
Parts: Technic, Liftarm

6538c Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Parts: Technic, Connector

32278 Technic, Liftarm Thick 1 x 15
Parts: Technic, Liftarm

/Jan

Author:

normann1974

Posted:

Apr 10, 2018 13:51

Subject:

Inventory Change Request for Set 8285-1

Viewed:

51 times

Topic:

Status:

Open

Please make changes to the following inventory:

8285-1 (Inv) Tow Truck
1879 Parts, 2006
Sets: Technic: Model: Traffic

Author:

Admin_Russell

Posted:

Apr 10, 2018 13:50

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

27 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, randyf writes:

In a couple of the images in the upper-left corner you can definitely tell that
the palm trunks have the short connector:

Thanks for finding that. The short connector is what the original submitter
was wanting to add to the set and this along with maggiec's sealed set definitely
confirm it.

Therefore, I think all of the evidence found in this thread added to the image
is sufficient to prove that the alternate existed.

The alternate is where the concern lies. The question is whether the set ever
came with the long connector and that is what has yet to be convincingly demonstrated.

I'm glad some headway is being made on these palm trunks. When they first
appeared in the catalog, I couldn't make head or tail as to where they fit
into the inventory system.

Author:

StormChaser

Posted:

Apr 10, 2018 13:44

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

23 times

Topic:

In Inventories Requests, randyf writes:

In a couple of the images in the upper-left corner you can definitely tell that
the palm trunks have the short connector:

Thanks for finding that. The short connector is what the original submitter
was wanting to add to the set and this along with maggiec's sealed set definitely
confirm it.

Therefore, I think all of the evidence found in this thread added to the image
is sufficient to prove that the alternate existed.

The alternate is where the concern lies. The question is whether the set ever
came with the long connector and that is what has yet to be convincingly demonstrated.

Author:

randyf

Posted:

Apr 10, 2018 13:35

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

21 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, ParisianStore writes:

Please make changes to the following inventory:

6411-1 (Inv) Sand Dollar Cafe
140 Parts, 5 Minifigures, 1992
Sets: Town: Paradisa

* Change 6 Part Brown {2536 Plant, Tree Palm Trunk to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}

Comments from Submitter:
I have bought the set 6411 on Ebay and the real palm trunk seems to be 2436b (empty hole, no slots inside).
All the parts are original because many of them were still clutched together and some of them are yellowed.

Unfortunately, I decided not to approve this request. I think you're probably
right and I'd like to get the undetermined entry out of the set inventory,
but there's no point in doing so if it's based on a source that I consider
unreliable.

If you find more reliable information in the future, then please resubmit the
request.

Robert -

I found a BrickShelf gallery that documents a sealed set being opened:
http://www.brickshelf.com/cgi-bin/gallery.cgi?f=268792

In a couple of the images in the upper-left corner you can definitely tell that
the palm trunks have the short connector:
http://www.brickshelf.com/gallery/Rober-to/Town/6411/6411g.jpg
http://www.brickshelf.com/gallery/Rober-to/Town/6411/6411i.jpg

Therefore, I think all of the evidence found in this thread added to the image
is sufficient to prove that the alternate existed.

Cheers,
Randy

Author:

randyf

Posted:

Apr 10, 2018 13:17

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

23 times

Topic:

In Inventories Requests, StormChaser writes:

I'll be looking through parts

While I'm thinking about it, terms like "Type 1" and "Type 2" are singularly
unhelpful. For example:

4662 Duplo Hook with Thin Bracing
Parts: DUPLO

15449 Duplo Hook with Thick Bracing
Parts: DUPLO

If I had a random Duplo hook, what about either catalog entry would let me know
which one I had? Nothing in the title, no notes, and no comparison images.

I think any catalog entries which specify an item is type 1 or type 2 should
be looked at more closely for possible improvement.

I tried changing a bunch of part names years ago that had "Type 1" or "Type 2",
etc. in them and all of them were rejected. I still think it is wholly uninformative
and useless to have such things in the names of parts.

Cheers,
Randy

Author:

Admin_Russell

Posted:

Apr 10, 2018 12:35

Subject:

Re: Inventory Change Request for Set 740-2

Viewed:

33 times

Topic:

In Inventories Requests, elias3 writes:

In Inventories Requests, SezaR writes:

The seller gp73 have this item, bought in 1974 with its original packaging.

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

740-2 (Inv) 12V Transformer for 220V Pack
1 Part, 1969
Sets: Train: Supplemental: 12V

* Add 1 Part 740 Light Gray Electric, Train 12V Transformer for 220V (Alternate) (match ID 1)
* Change 1 Part Blue 740 Electric, Train 12V Transformer for 220V {match ID 0 to 1}

Right, I uploaded the light gray picture.
Maybe 'various color' ? As we do by the minifigs.

Stefaan

Speaking of pictures, it would be great if someone could upload a better photo
of the blue one.

Author:

CrazyChris

Posted:

Apr 10, 2018 05:48

Subject:

Re: Inventory Change Request for Set 7824-1

Viewed:

37 times

Topic:

In Inventories Requests, Jojo writes:

Hello!

In Inventories Requests, StormChaser writes:

To anyone reading this in the future, since these messages are permanently saved:
the finger hinges for this set have been moved around, added, and deleted in
nearly every possible way. They're fine now. Leave them alone.

Regardless of how often the inventory for this set has been changed in the past,
both hollow and closed studes on these hinges are possible to be in this set.
This means both versions should be included in the inventory, one as regular,
one as alternate. Since closed studes were the original when this set was released,
hollow studs were the "alternate" done by Lego themselves. There you have it.

Bye
Jojo

I totally agree on that.
But in general, I‘ve given up on this issue.
Correcting the inventories could be done so fast and smoothly, if admins would
choose a better process...

Author:

StormChaser

Posted:

Apr 10, 2018 03:47

Subject:

Re: Inventory Change Request for Set 740-2

Viewed:

20 times

Topic:

In Inventories Requests, elias3 writes:

We you list it as part, you can select the right color like the minfig torso

I thought that's what you may be referring to. The reason torsos (and many
other part assemblies) are inventoried this way is so that they can be easily
used in multiple inventories.

I don't believe variable color inventories are appropriate for sets in most
cases. It could be done, yes, but I think having the alternate color for parts
is more appropriate for most sets (including this one).

You may notice that even sets which could include a larger variety of colors
are not traditionally given a single variable-color part inventory:

222-3 (Inv) 1 x 1 Bricks
62 Parts, 1961
Sets: Samsonite: Supplemental

And then sometimes you get only this (see inventory note):

9962-1 (Inv) Flat Tiles
12 Parts, 1994
Sets: Educational & Dacta: Service Packs

As MISB set you don't know what you have inside, it can be blue or light
gray.

Indeed that's true and the alternate part in the inventory will allow sellers
to part out the set depending on what color they find.

Author:

elias3

Posted:

Apr 10, 2018 03:34

Subject:

Re: Inventory Change Request for Set 740-2

Viewed:

21 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, elias3 writes:

Maybe 'various color' ? As we do by the minifigs.

I'm confused by what you're asking here. Can you elucidate?

Robert

In this inventory we have the 'blue' and/or the 'light gray'
one.
But if we use 1 part for the inv. as 'various color'.

We you list it as part, you can select the right color like the minfig torso
https://www.bricklink.com/v2/catalog/catalogitem.page?P=973&idColor=0#T=C&C=0
various color: (or no color)
https://www.bricklink.com/catalogItemInv.asp?P=973c02

As MISB set you don't know what you have inside, it can be blue or light
gray. (or maybe there is a color dot on the box as we seen on other sets at that
time)

Stefaan

Author:

SezaR

Posted:

Apr 10, 2018 03:11

Subject:

Re: Inventory Change Request for Set 740-2

Viewed:

27 times

Topic:

About two weeks ago, I did some search and found few other auctions listing or
other photos of this gray transformer with the box of 740.
Otherwise, how did this gray transformer appear?

More important, please note that the blue era ended in 1979 and the gray era
began in 1980. However, it seems to me that the blue track-related parts had
already began to be replaced by their gray ones. For example, see
[p=bb93]
and
[p=bb141c01].
Their gray ones do not appear in any set. (Of course, I will work on them

)

Knowing this fact would make my future inventory requests much smoother.

In Inventories Requests, StormChaser writes:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

740-2 (Inv) 12V Transformer for 220V Pack
1 Part, 1969
Sets: Train: Supplemental: 12V

* Add 1 Part 740 Light Gray Electric, Train 12V Transformer for 220V (Alternate) (match ID 1)
* Change 1 Part Blue 740 Electric, Train 12V Transformer for 220V {match ID 0 to 1}

At the time of this request, longtime member brasletty has a new set for sale
which also shows the light gray transformer (photo attached) The part in light
gray appears in no other set at this time, but multiple photos demonstrate its
existence and there are 7 listings of light gray for sale.

I have little doubt in the accuracy of this request and it has been approved.

Author:

StormChaser

Posted:

Apr 10, 2018 03:11

Subject:

Re: Inventory Change Request for Set 740-2

Viewed:

22 times

Topic:

In Inventories Requests, elias3 writes:

Maybe 'various color' ? As we do by the minifigs.

I'm confused by what you're asking here. Can you elucidate?

Author:

elias3

Posted:

Apr 10, 2018 03:02

Subject:

Re: Inventory Change Request for Set 740-2

Viewed:

21 times

Topic:

In Inventories Requests, SezaR writes:

The seller gp73 have this item, bought in 1974 with its original packaging.

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

740-2 (Inv) 12V Transformer for 220V Pack
1 Part, 1969
Sets: Train: Supplemental: 12V

* Add 1 Part 740 Light Gray Electric, Train 12V Transformer for 220V (Alternate) (match ID 1)
* Change 1 Part Blue 740 Electric, Train 12V Transformer for 220V {match ID 0 to 1}

Right, I uploaded the light gray picture.
Maybe 'various color' ? As we do by the minifigs.

Stefaan

Author:

StormChaser

Posted:

Apr 10, 2018 02:59

Subject:

Re: Inventory Change Request for Set 740-2

Viewed:

21 times

Topic:

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

740-2 (Inv) 12V Transformer for 220V Pack
1 Part, 1969
Sets: Train: Supplemental: 12V

* Add 1 Part 740 Light Gray Electric, Train 12V Transformer for 220V (Alternate) (match ID 1)
* Change 1 Part Blue 740 Electric, Train 12V Transformer for 220V {match ID 0 to 1}

Author:

StormChaser

Posted:

Apr 10, 2018 02:35

Subject:

Re: Inventory Change Request for Set 9980-1

Viewed:

22 times

Topic:

In Inventories Requests, LordSkylark writes:

I am curious. Are there any advantages to the administrators to having a separate
"delete" and "add" for an inventory instead of merely a "change"?

None that I'm aware of. It's just habit for me to submit change requests
that way.

Author:

SezaR

Posted:

Apr 9, 2018 20:05

Subject:

Re: Inventory Change Request for Set 740-2

Viewed:

17 times

Topic:

The seller gp73 have this item, bought in 1974 with its original packaging.

In Inventories Requests, SezaR writes:

Please make changes to the following inventory:

740-2 (Inv) 12V Transformer for 220V Pack
1 Part, 1969
Sets: Train: Supplemental: 12V

* Add 1 Part 740 Light Gray Electric, Train 12V Transformer for 220V (Alternate) (match ID 1)
* Change 1 Part Blue 740 Electric, Train 12V Transformer for 220V {match ID 0 to 1}

Author:

SezaR

Posted:

Apr 9, 2018 20:03

Subject:

Inventory Change Request for Set 740-2

Viewed:

37 times

Topic:

Status:

Open

Please make changes to the following inventory:

740-2 (Inv) 12V Transformer for 220V Pack
1 Part, 1969
Sets: Train: Supplemental: 12V

* Add 1 Part 740 Light Gray Electric, Train 12V Transformer for 220V (Alternate) (match ID 1)
* Change 1 Part Blue 740 Electric, Train 12V Transformer for 220V {match ID 0 to 1}

Author:

normann1974

Posted:

Apr 9, 2018 17:20

Subject:

Re: Inventory Change Request for Set 7945-1

Viewed:

25 times

Topic:

In Inventories Requests, Hygrotus writes:

In Inventories Requests, normann1974 writes:

Please make changes to the following inventory:

7945-1 (Inv) Fire Station
584 Parts, 4 Minifigures, 2007
Sets: Town: City: Fire

* Add 1 Part 60849 Yellow Minifig, Utensil Hose Nozzle Elaborate (Extra)
* Change 4 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 3 Part Red {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud / Hollow Stud}

Comments from Submitter:
Source: MISB-based set that were never mixed with other bricks.

In this inventory there is also 3794 in LBG color, can you also check it, you
only change white 3794

Marek

Sorry, I forgot this one in my request. It's also non-grooved. I made an
extra request for the LBG part:

https://www.bricklink.com/messageThread.asp?ID=235005

/Jan

Author:

normann1974

Posted:

Apr 9, 2018 17:19

Subject:

Inventory Change Request for Set 7945-1

Viewed:

28 times

Topic:

Status:

Open

Please make changes to the following inventory:

7945-1 (Inv) Fire Station
584 Parts, 4 Minifigures, 2007
Sets: Town: City: Fire

* Change 1 Part Light Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Comments from Submitter:
Forgot this one in my previous request: https://www.bricklink.com/message.asp?ID=1085390

Author:

LordSkylark

Posted:

Apr 9, 2018 14:22

Subject:

Re: Inventory Change Request for Set 9980-1

Viewed:

32 times

Topic:

In Inventories Requests, StormChaser writes:

Please make changes to the following inventory:

9980-1 (Inv) World People
18 Minifigures, 1992
Sets: Educational & Dacta: DUPLO: Supplemental

* Delete 1 Minifig 4555pb126 Duplo Figure, Male, Blue Legs, Blue Top, Life Jacket, Red Cap, no White in Eyes pattern
* Add 1 Minifig 4555pb267 Duplo Figure, Male, Blue Legs, Blue Top, Life Jacket, Red Cap, with White in Eyes pattern

I am curious. Are there any advantages to the administrators to having a separate
"delete" and "add" for an inventory instead of merely a "change"?

Andrew

Author:

elias3

Posted:

Apr 9, 2018 13:46

Subject:

Inventory Change Request for Set 4440-1

Viewed:

27 times

Topic:

Status:

Open

Please make changes to the following inventory:

4440-1 (Inv) Forest Police Station
612 Parts, 5 Minifigures, 2012
Sets: Town: City: Police

* Delete 1 Part 3684c Light Bluish Gray Slope 75 2 x 2 x 3 - Solid Studs (Alternate) (match ID 6)
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)} (Alternate)
* Change 1 Part Light Bluish Gray {3684 Slope 75 2 x 2 x 3 - Undetermined Stud Type to 3684c Slope 75 2 x 2 x 3 - Solid Studs} {match ID 6 to 0}
* Change 3 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 1 Part White {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Comments from Submitter:
check undetermined type: my source set was and is still build up 1 time. 3794 just change because the catalog change was made to the undetermined type a few weeks ago. The black 3794 is the -b type, DBG and white 3794 are the -a type. For the slope 3684 it's the -c type.

Author:

Hygrotus

Posted:

Apr 9, 2018 13:31

Subject:

Re: Inventory Change Request for Set 7945-1

Viewed:

19 times

Topic:

In Inventories Requests, normann1974 writes:

Please make changes to the following inventory:

7945-1 (Inv) Fire Station
584 Parts, 4 Minifigures, 2007
Sets: Town: City: Fire

In this inventory there is also 3794 in LBG color, can you also check it, you
only change white 3794

Marek

Author:

elias3

Posted:

Apr 9, 2018 13:27

Subject:

Inventory Change Request for Set 10193-1

Viewed:

32 times

Topic:

Status:

Open

Please make changes to the following inventory:

10193-1 (Inv) Medieval Market Village
1568 Parts, 8 Minifigures, 2009
Sets: Castle: Fantasy Era

* Delete 2 Part 4599 Light Bluish Gray Tap 1 x 1 - Undetermined End (match ID 3)
* Change 5 Part Light Bluish Gray {3684 Slope 75 2 x 2 x 3 - Undetermined Stud Type to 3684a Slope 75 2 x 2 x 3 - Hollow Studs}
* Change 7 Part Reddish Brown {2453 Brick 1 x 1 x 5 - Undetermined Stud Type to 2453a Brick 1 x 1 x 5 - Blocked Open Stud / Hollow Stud}
* Change 2 Part Light Bluish Gray 4599b Tap 1 x 1 without Hole in End {Alternate to Regular} {match ID 3 to 0}

Comments from Submitter:
check for undetermined types, my source is MIB (bags are closed)

Author:

Admin_Russell

Posted:

Apr 9, 2018 13:09

Subject:

Inventory Change Request for Set 6872-1

Viewed:

27 times

Topic:

Status:

Open

Please make changes to the following inventory:

6872-1 (Inv) Lunar Patrol Craft
62 Parts, 2 Minifigures, 1985
Sets: Space: Classic Space

* Add 2 Part 4085b Light Gray Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (Alternate) (match ID 3)
* Change 2 Part Light Gray 4085a Plate, Modified 1 x 1 with Clip Vertical - Type 1 (thin open O clip) {match ID 0 to 3}

Comments from Submitter:
The existence of the 'B' type clip has been confirmed with sealed set contents by the original submitter of this inventory.

Author:

Admin_Russell

Posted:

Apr 9, 2018 12:14

Subject:

Inventory Change Request for Set 70656-1

Viewed:

36 times

Topic:

Status:

Open

Please make changes to the following inventory:

70656-1 (Inv) garmadon, Garmadon, GARMADON!
803 Parts, 6 Minifigures, 2017
Sets: The LEGO NINJAGO Movie

* Add 1 Part 64567 Black Minifig, Weapon Lightsaber Hilt Straight (Extra)
* Add 1 Part 21459 Flat Silver Minifig, Weapon Sword, Shamshir/Katana (Square Guard) with Capped Pommel and Holes in Crossguard and Blade (Extra)
* Add 1 Part 18654 Flat Silver Technic, Pin Connector Round 1L (Extra)
* Add 1 Part 54200 White Slope 30 1 x 1 x 2/3 (Extra)

Comments from Submitter:
From a sealed set.

Author:

LordSkylark

Posted:

Apr 9, 2018 11:48

Subject:

Inventory Change Request for Set 7597-1

Viewed:

25 times

Topic:

Status:

Open

Please make changes to the following inventory:

7597-1 (Inv) Western Train Chase
571 Parts, 3 Minifigures, 2010
Sets: Toy Story: Toy Story 3

* Change 4 Part Red {60583 Brick, Modified 1 x 1 x 3 with 2 Clips Vertical - Undetermined Stud Type to 60583a Brick, Modified 1 x 1 x 3 with 2 Clips Vertical - Solid Stud}

Comments from Submitter:
I know for certain that this is correct. This is where I originally noticed that there were two variants and I submitted the versions in the catalog. So I can confidently confirm that both variants came in this set.

Author:

normann1974

Posted:

Apr 9, 2018 11:02

Subject:

Inventory Change Request for Set 7945-1

Viewed:

32 times

Topic:

Status:

Open

Please make changes to the following inventory:

7945-1 (Inv) Fire Station
584 Parts, 4 Minifigures, 2007
Sets: Town: City: Fire

Author:

Jojo

Posted:

Apr 9, 2018 08:02

Subject:

Re: Inventory Change Request for Set 7824-1

Viewed:

38 times

Topic:

Hello!

FYI

In Inventories Requests, SezaR writes:

The problem of hinges is that they started to appear with hollow studs since
1987 but I believe they were in production since 1985. Some sets such as 7823,
7735 and 7745 come with hinges. But I have never seen them in any auction with
hinges of solid studs. (except for, 7745 a couple of times with 2* gray 2-finger
hinges, but not the other hinges in this set)

My copy of 7823 from 1986 (catalogue!) came with hollowly studded hinges:

https://steinwurf.wordpress.com/2015/08/16/container-kran-7823/

Kind Regards
Jojo

Author:

StormChaser

Posted:

Apr 9, 2018 04:21

Subject:

Inventory Change Request for Set 6411-1

Viewed:

26 times

Topic:

Status:

Open

Please make changes to the following inventory:

6411-1 (Inv) Sand Dollar Cafe
140 Parts, 5 Minifigures, 1992
Sets: Town: Paradisa

* Change 6 Part Brown {2536 Plant, Tree Palm Trunk - Undetermined Type to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}

Comments from Submitter:
Request was originally submitted by member ParisianStore. The source was a used set purchased on eBay and the request was denied based on the source.

The accuracy of the request was later confirmed by catalog administrator maggiec based on a sealed set. The original submitter should get credit for this change, but has not resubmitted the request.

It is possible, perhaps even likely, that this set also included 2536a at some point (possibly even a mixture of both in some sets). That has not been confirmed yet, though.

Author:

StormChaser

Posted:

Apr 9, 2018 04:07

Subject:

Re: Inventory Change Request for Set 9980-1

Viewed:

24 times

Topic:

In Inventories Requests, StormChaser writes:

Please make changes to the following inventory:

Author:

StormChaser

Posted:

Apr 9, 2018 04:06

Subject:

Inventory Change Request for Set 9980-1

Viewed:

28 times

Topic:

Status:

Open

Please make changes to the following inventory:

9980-1 (Inv) World People
18 Minifigures, 1992
Sets: Educational & Dacta: DUPLO: Supplemental

Author:

SezaR

Posted:

Apr 8, 2018 20:17

Subject:

Re: Inventory Change Request for Set 122-1

Viewed:

36 times

Topic:

Another one

In Inventories Requests, SezaR writes:

This set may need a couple of more changes. See attached few photos of a MIB
one:

In Inventories Requests, Admin_Russell writes:

In Inventories Requests, osborne10 writes:

Photo of set with box.
Inventories extras seen in photo.
Trainrim Train Rim can be seen is black in photo.

In Inventories Requests, SezaR writes:

I may be able to help. But, can the submitter kindly upload some photos of his
set with the box?

In Inventories Requests, StormChaser writes:

In Inventories Requests, osborne10 writes:

Please make changes to the following inventory:

122-1 (Inv) Loco and Tender
96 Parts, 1969
Sets: Train: 4.5V

* Add 4 Part 7039 Red Wheel Old with 4 Studs (Extra)
* Add 2 Part x486a Black Tread Small - Old - Wedge Shaped Treads (Extra)
* Add 4 Part 132old Black Tire Smooth Old Style - Small (Extra)
* Add 4 Part trainrim Black Train Rim for 4.5V & 12V Locomotive Wheels

These requests have been pending for a while.

Would appreciate any input from the other people here on BrickLink who have an
interest in classic trains.

Thank you for the image.

These changes have been approved, except for the
one adding the black rims. These are already present in the inventory by way
of alternate.

Author:

SezaR

Posted:

Apr 8, 2018 20:13

Subject:

Re: Inventory Change Request for Set 122-1

Viewed:

39 times

Topic:

This set may need a couple of more changes. See attached few photos of a MIB
one:

In Inventories Requests, Admin_Russell writes:

In Inventories Requests, osborne10 writes:

Photo of set with box.
Inventories extras seen in photo.
Trainrim Train Rim can be seen is black in photo.

In Inventories Requests, SezaR writes:

I may be able to help. But, can the submitter kindly upload some photos of his
set with the box?

In Inventories Requests, StormChaser writes:

In Inventories Requests, osborne10 writes:

Please make changes to the following inventory:

122-1 (Inv) Loco and Tender
96 Parts, 1969
Sets: Train: 4.5V

These requests have been pending for a while.

Would appreciate any input from the other people here on BrickLink who have an
interest in classic trains.

Thank you for the image.

These changes have been approved, except for the
one adding the black rims. These are already present in the inventory by way
of alternate.

Author:

Admin_Russell

Posted:

Apr 8, 2018 19:55

Subject:

Re: Inventory Change Request for Set 122-1

Viewed:

36 times

Topic:

In Inventories Requests, osborne10 writes:

Photo of set with box.
Inventories extras seen in photo.
Trainrim Train Rim can be seen is black in photo.

In Inventories Requests, SezaR writes:

I may be able to help. But, can the submitter kindly upload some photos of his
set with the box?

In Inventories Requests, StormChaser writes:

In Inventories Requests, osborne10 writes:

Please make changes to the following inventory:

122-1 (Inv) Loco and Tender
96 Parts, 1969
Sets: Train: 4.5V

These requests have been pending for a while.

Would appreciate any input from the other people here on BrickLink who have an
interest in classic trains.

Thank you for the image.

These changes have been approved, except for the
one adding the black rims. These are already present in the inventory by way
of alternate.

Author:

Admin_Russell

Posted:

Apr 8, 2018 18:55

Subject:

Re: Inventory Change Request for Set 6872-1

Viewed:

32 times

Topic:

In Inventories Requests, el_gordo writes:

In Inventories Requests, Admin_Russell writes:

Normally old inventories with no source are unreliable when it comes to variants.
This particular submitter, though, is an expert on Classic Space, and when I
have contacted him in the past he has been able to defend all of his old inventories
with sealed set contents.

To be clear, my earlier comment wasn't meant to question the original submitter's
good faith; I realize it could have been inferred as such, which was unintended.

But to follow up on a previous remark, how can we know b-type is more common
(cf: rules) from a sample of one, anyway?
I can't dismiss the original inventory as innacurate; what I can do is ask
for further input from others to establish precedence between versions, thus
properly following the rules as they stand. I suppose a review of the rules themselves
would be out of the question?

In the meanwhile - please advise how to proceed. Should I add a-type as alternate,
for the sake of inclusion?
Pedro

I have cheanged the inventory to Type A for the moment. I'll send a note
to the original submitter to confirm the older part.

Author:

osborne10

Posted:

Apr 8, 2018 18:24

Subject:

Re: Inventory Change Request for Set 122-1

Viewed:

34 times

Topic:

Photo of set with box.
Inventories extras seen in photo.
Trainrim Train Rim can be seen is black in photo.

In Inventories Requests, SezaR writes:

I may be able to help. But, can the submitter kindly upload some photos of his
set with the box?

In Inventories Requests, StormChaser writes:

In Inventories Requests, osborne10 writes:

Please make changes to the following inventory:

122-1 (Inv) Loco and Tender
96 Parts, 1969
Sets: Train: 4.5V

These requests have been pending for a while.

Would appreciate any input from the other people here on BrickLink who have an
interest in classic trains.

Author:

SezaR

Posted:

Apr 8, 2018 17:18

Subject:

Re: Inventory Change Request for Set 7824-1

Viewed:

30 times

Topic:

Hello

This set was released between 1983-90. The inventory was corrected as you said.
The problem of hinges is that they started to appear with hollow studs since
1987 but I believe they were in production since 1985. Some sets such as 7823,
7735 and 7745 come with hinges. But I have never seen them in any auction with
hinges of solid studs. (except for, 7745 a couple of times with 2* gray 2-finger
hinges, but not the other hinges in this set)

In Inventories Requests, Jojo writes:

Hello!

In Inventories Requests, StormChaser writes:

Author:

Hygrotus

Posted:

Apr 8, 2018 16:48

Subject:

Inventory Change Request for Set 40298-1

Viewed:

21 times

Topic:

Status:

Open

Please make changes to the following inventory:

40298-1 (Inv) DJ polybag
18 Parts, 1 Minifigure, 2018
Sets: Star Wars: Star Wars Episode 8

* Add 1 Part 2431pb514 Black Tile 1 x 4 with 'DJ' Pattern (Sticker) - Set 40298 (Counterpart)

Author:

Jojo

Posted:

Apr 8, 2018 16:27

Subject:

Re: Inventory Change Request for Set 7824-1

Viewed:

31 times

Topic:

Hello!

In Inventories Requests, StormChaser writes:

Author:

stecre

Posted:

Apr 8, 2018 15:22

Subject:

Inventory Change Request for Set 10237-1

Viewed:

27 times

Topic:

Status:

Open

Please make changes to the following inventory:

10237-1 (Inv) The Tower of Orthanc
2335 Parts, 5 Minifigures, 2013
Sets: The Hobbit and The Lord of the Rings: The Lord of the Rings

* Add 4 Part 15571 Black Slope 45 2 x 1 Triple with Bottom Stud Holder (Alternate) (match ID 9)
* Change 4 Part Black 3048c Slope 45 2 x 1 Triple with Inside Bar {match ID 0 to 9}

Comments from Submitter:
This part variant is present in my version of the set which I have owned from new.

Author:

elias3

Posted:

Apr 8, 2018 14:04

Subject:

Re: Inventory Change Request for Set 7824-1

Viewed:

26 times

Topic:

In Inventories Requests, normann1974 writes:

In Inventories Requests, SezaR writes:

Good to know that I an not alone in believing that hinges with hollow studs appeared
first in 1985! Many say 1987.
The sets 7735, 7745 and 7817 fro; 1985 and 7823 and 7839 fro; 1986 are listed
with hinges with solid studs. I have failed seeing them on various auction sites
coming with hinges of solid stud (not even once)
My inventory change request to add hinges with hollow studs as alternative to
7735 from 1985-90 was rejected.

In Inventories Requests, normann1974 writes:

In Inventories Requests, SezaR writes:

I know that the hinges with hollow studs started to appear in instructions since
1987 but It seems to me that they were in production since 1985.

What do you know about hinges?

Some time ago, I made some changes to old space sets regarding these hinges.

Here are my findings: https://www.bricklink.com/messageThread.asp?ID=221772

So 1985 is also the first year of hollow studs in my findings.

Set 6844 (1983): Solid studs
Set 6928 (1984): Solid studs
Set 6872 (1985): Hollow studs
Set 6055 (1985): Hollow studs

/Jan

All I know are the release years of the sets, so actually I can't prove that
1985 is the year that the hollow studs made their first appearance. But they
show up in sets that were first released in 1985. My sets might be from a later
production. I don't how for how many years each set were produced.

/Jan

Hi

check this set inventory from 1986:

6359-1 (Inv) Horse Trailer
136 Parts, 1 Minifigure, 1986
Sets: Town: Classic Town: Recreation

the white color hinge 4275 never found as 4275a type, same for the white but
the 4276 started in 1987 sets

Stefaan

Author:

jethroo

Posted:

Apr 8, 2018 12:19

Subject:

Inventory Change Request for Set 10246-1

Viewed:

30 times

Topic:

Status:

Open

Please make changes to the following inventory:

10246-1 (Inv) Detective's Office
2238 Parts, 6 Minifigures, 2015
Sets: Creator: Creator Expert: Modular Buildings Collection

* Add 4 Part 3068bpb1105 White Tile 2 x 2 with 'THE LEGO NEWS' and 'The greatest hero ever!' Pattern (match ID 2)
* Change 4 Part White 3068bpb0431 Tile 2 x 2 with Newspaper 'THE LEGO NEWS', 'volume 3' and 'The greatest LEGO hero ever!' Pattern {match ID 0 to 2}

Comments from Submitter:
just building this from a sealed box and the sets comes with the alternate newspaper version

Author:

StormChaser

Posted:

Apr 7, 2018 10:08

Subject:

Re: Inventory Change Request for Set 8637-1

Viewed:

27 times

Topic:

In Inventories Requests, normann1974 writes:

If you're in doubt which color the hoses are, why would you choose Flat Silver
instead of PLG?

Primarily because you said:

I bought this set in a large lot of sets.

You can't know if the parts in this set have been tampered with. Also, flat
silver makes more sense when looking at the set photo - these parts are clearly
intended to be silvery to accent the metallic silver parts in the set.

Further, there is some debate over whether PLG and flat silver are officially
different colors or merely variations in what TLG intended to be the same color.

You'll notice that this part only appears in 1 set in PLG:

78c07 Hose, Ribbed 7mm D. 7L / 5.6cm
Parts: Hose, Ribbed 7mm D.

and this only in 4 sets:

78c11 Hose, Ribbed 7mm D. 11L / 8.8cm
Parts: Hose, Ribbed 7mm D.

So the parts appear in a combined total of 5 sets in PLG, but in a combined total
of 40 sets in flat silver.

Author:

Hygrotus

Posted:

Apr 7, 2018 05:10

Subject:

Re: Inventory Change Request for Set 21144-1

Viewed:

17 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, Hygrotus writes:

BTW this set particular set, did you look also at the horse in this instruction
its assembly has the head added at penultimate step, so bags are aded before
whole assembly is completed. It not yet added but it's pending

minehorse03 (Inv) Minecraft Horse Skeletal / Skeleton (Thin Neck Bracket) - Brick Built
Parts: Animal, Land

without photo currently.

Yes, I see what you're saying.

So it's a good time.

It's a good time to update this page:

https://www.bricklink.com/help.asp?helpID=205

It doesn't address this situation at all. We have the ability to update
the page and I think we should.

Agreed

Marek

Author:

normann1974

Posted:

Apr 7, 2018 04:57

Subject:

Re: Inventory Change Request for Set 7824-1

Viewed:

30 times

Topic:

In Inventories Requests, SezaR writes:

I know that the hinges with hollow studs started to appear in instructions since
1987 but It seems to me that they were in production since 1985.

What do you know about hinges?

Author:

normann1974

Posted:

Apr 7, 2018 04:51

Subject:

Re: Inventory Change Request for Set 8637-1

Viewed:

26 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, normann1974 writes:

Please make changes to the following inventory:

8637-1 (Inv) Mission 8: Volcano Base
688 Parts, 6 Minifigures, 2008
Sets: Agents

* Add 2 Part 78c07 Pearl Light Gray Hose, Ribbed 7mm D. 7L (Alternate) (match ID 2)
* Change 2 Part {Metallic Silver to Flat Silver} 78c07 Hose, Ribbed 7mm D. 7L {match ID 0 to 2}
* Change 1 Part {Metallic Silver to Pearl Light Gray} 78c11 Hose, Ribbed 7mm D. 11L

Okay, here's what I did. I approved your requests (except for adding the
alternate) and then changed the colors of all the ribbed hoses in this set to
flat silver. I did this because in large official images of the set all three
hoses appear to be the same color (I also submitted the largest possible image
of the set to the catalog).

The PCC you mentioned for the 11L hose is shared by PLG and flat silver on BrickLink,
BTW, so either could be correct. I also updated the ribbed hoses in the extra
parts section to flat silver for this set.

This changes may not be correct, but I think the only way to know for sure is
to check a brand new set.

If you're in doubt which color the hoses are, why would you choose Flat Silver
instead of PLG? I've argued that they're PLG and I believe my image shows
it. If not convinced, I've now taken another picture to show the color differences.

On top is some flat silver parts (the tile only exists in Flat Silver and it
comes from set 10232), including the short hose found in my spare parts.

On the bottom are PLG parts (including one of the hoses that must belong to set
8637).

In other words, I still believe that PLG is the correct color of the hoses in
this set.

/Jan

Author:

SezaR

Posted:

Apr 7, 2018 03:46

Subject:

Re: Inventory Change Request for Set 122-1

Viewed:

34 times

Topic:

I may be able to help. But, can the submitter kindly upload some photos of his
set with the box?

In Inventories Requests, StormChaser writes:

In Inventories Requests, osborne10 writes:

Please make changes to the following inventory:

122-1 (Inv) Loco and Tender
96 Parts, 1969
Sets: Train: 4.5V

These requests have been pending for a while.

Would appreciate any input from the other people here on BrickLink who have an
interest in classic trains.

Author:

SezaR

Posted:

Apr 7, 2018 03:35

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

26 times

Topic:

Dan had a particular way in giving marks for each inventory change reqeust. He
told me this himself in one of my recent dreams.
He gives some weight to each inv. change requests in a way that if the inv. change
is for an old set, the weight is more than 100 times than if an inv. change request
is added for some part like a jumper with/without groove. Specially, if the inv.
change is submitted for a set that had not have any change for years and that
the submitted h has suffered some grifes from admins, then the weight would be
200.

In Inventories Requests, StormChaser writes:

In Inventories Requests, SezaR writes:

It will be
more than 100 inventory change requests. I guess my name and Lego.12vtrains'
one should then be added to the Guinness book of World Records?

No, 100 change requests won't get you there. See this list of contributors:

https://www.bricklink.com/catalogMembers.asp?viewAll=R

Author:

SezaR

Posted:

Apr 7, 2018 03:07

Subject:

Re: Inventory Change Request for Set 7824-1

Viewed:

24 times

Topic:

In Inventories Requests, SezaR writes:

I know that the hinges with hollow studs started to appear in instructions since
1987 but It seems to me that they were in production since 1985.

What do you know about hinges?

Author:

StormChaser

Posted:

Apr 7, 2018 03:05

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

24 times

Topic:

In Inventories Requests, SezaR writes:

It will be
more than 100 inventory change requests. I guess my name and Lego.12vtrains'
one should then be added to the Guinness book of World Records?

No, 100 change requests won't get you there. See this list of contributors:

https://www.bricklink.com/catalogMembers.asp?viewAll=R

Author:

SezaR

Posted:

Apr 7, 2018 03:02

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

25 times

Topic:

I heard somebody has been knocking my door.
Our excel file consists of 31 sheets for 31 sets, each consisting of some parts
in one of the following status:
1) need further investigation (we don't know yet if the part has to be added
to the inventory of that set)
2) we know that the part has to be added (or removed) and we have found enough
evidence (so once it is possible, the inventory change can be submitted)
3) we know and we are sure that the part has to be added to the inventory (or
removed from the inv.) but we need more evidence to prove it to Stormchaser/admin_Russel/viejos

If this inventory change is going to be approved, then I can assume we can remove
the third category from my excel file and submit them right away. It will be
more than 100 inventory change requests. I guess my name and Lego.12vtrains'
one should then be added to the Guinness book of World Records?

In Inventories Requests, StormChaser writes:

In Inventories Requests, maggiec writes:

My gut feeling is that both variations appeared in Paradisa sets, and I'd
probably have them as alternates, but I can understand if you want to wait for
more definitive evidence.

I imagine you're very likely right, but I'd feel bad about adding them
as alternates based on a hunch after all the grief I've given SezaR over
proving things.

Author:

StormChaser

Posted:

Apr 7, 2018 00:00

Subject:

Re: Inventory Change Request for Set 122-1

Viewed:

33 times

Topic:

In Inventories Requests, osborne10 writes:

Please make changes to the following inventory:

122-1 (Inv) Loco and Tender
96 Parts, 1969
Sets: Train: 4.5V

These requests have been pending for a while.

Would appreciate any input from the other people here on BrickLink who have an
interest in classic trains.

Author:

StormChaser

Posted:

Apr 6, 2018 23:48

Subject:

Re: Inventory Change Request for Set 21144-1

Viewed:

21 times

Topic:

In Inventories Requests, Hygrotus writes:

minehorse03 (Inv) Minecraft Horse Skeletal / Skeleton (Thin Neck Bracket) - Brick Built
Parts: Animal, Land

without photo currently.

Yes, I see what you're saying.

So it's a good time.

It's a good time to update this page:

https://www.bricklink.com/help.asp?helpID=205

It doesn't address this situation at all. We have the ability to update
the page and I think we should.

Author:

StormChaser

Posted:

Apr 6, 2018 23:40

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

19 times

Topic:

In Inventories Requests, maggiec writes:

My gut feeling is that both variations appeared in Paradisa sets, and I'd
probably have them as alternates, but I can understand if you want to wait for
more definitive evidence.

I imagine you're very likely right, but I'd feel bad about adding them
as alternates based on a hunch after all the grief I've given SezaR over
proving things.

Author:

StormChaser

Posted:

Apr 6, 2018 23:23

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

20 times

Topic:

In Inventories Requests, maggiec writes:

Aha, so when I took my Poolside Paradise back to the basement, I found a sealed
Sand Dollar Café. So lifting up the flap I can see that three of the segments
are 2536b (I can't make out the others). That should be enough to show that
6411 did come with the B-type.

That's good enough for me.

Thank you for braving the darkness twice.

ParisianStore, if you'll resubmit the request it will be approved. If you
haven't done so in a day or two, then I'll make the changes you requested
myself. Sorry . . . I rejected your requests too soon.

Author:

maggiec

Posted:

Apr 6, 2018 23:17

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

29 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, ParisianStore writes:

Please make changes to the following inventory:

6411-1 (Inv) Sand Dollar Cafe
140 Parts, 5 Minifigures, 1992
Sets: Town: Paradisa

Author:

maggiec

Posted:

Apr 6, 2018 23:05

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

29 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, maggiec writes:

but I did find three open

6416-1 (Inv) Poolside Paradise
211 Parts, 4 Minifigures, 1992
Sets: Town: Paradisa

Thanks for checking! I updated the inventory of that set to 2536a, although
I didn't put 2536b as an alternate. If you think it would be reasonable
to include the alternate also, then let me know and I can do it.

Okay, so I went down to the basement (which I hate to do after dark even though
it's just as dark down there during midday) to take a look at a sealed one
in my shop figuring I'd find 2536b, as these sets were from a later run purchased
from KB Toy Liquidators a year or two after they were at other stores, but the
four trunk segments I can see through the window under the flap are all 2536a.
My gut feeling is that both variations appeared in Paradisa sets, and I'd
probably have them as alternates, but I can understand if you want to wait for
more definitive evidence.

Author:

StormChaser

Posted:

Apr 6, 2018 23:03

Subject:

Re: Inventory Change Request for Set 8637-1

Viewed:

18 times

Topic:

In Inventories Requests, normann1974 writes:

Please make changes to the following inventory:

8637-1 (Inv) Mission 8: Volcano Base
688 Parts, 6 Minifigures, 2008
Sets: Agents

Author:

StormChaser

Posted:

Apr 6, 2018 22:45

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

18 times

Topic:

In Inventories Requests, ParisianStore writes:

Please make changes to the following inventory:

6411-1 (Inv) Sand Dollar Cafe
140 Parts, 5 Minifigures, 1992
Sets: Town: Paradisa

Author:

StormChaser

Posted:

Apr 6, 2018 22:38

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

21 times

Topic:

In Inventories Requests, maggiec writes:

but I did find three open

6416-1 (Inv) Poolside Paradise
211 Parts, 4 Minifigures, 1992
Sets: Town: Paradisa

Author:

StormChaser

Posted:

Apr 6, 2018 22:33

Subject:

Inventory Change Request for Set 6416-1

Viewed:

25 times

Topic:

Status:

Open

Please make changes to the following inventory:

6416-1 (Inv) Poolside Paradise
211 Parts, 4 Minifigures, 1992
Sets: Town: Paradisa

* Delete 6 Part 2536 Brown Plant, Tree Palm Trunk - Undetermined Type
* Add 6 Part 2536a Brown Plant, Tree Palm Trunk - Long Connector

Comments from Submitter:
Confirmed by catalog administrator maggiec in a sealed set purchased new. Two other copies of the same set owned by Maggie contained 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole. One copy had 3 each of 2536a and 2536b and the other copy had all 2536b.

Part 2536b was likely an alternate for this set, but the origin of Maggie's other two sets is not as certain. Therefore, I'm not adding it as an alternate at this time.

Author:

StormChaser

Posted:

Apr 6, 2018 21:33

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

17 times

Topic:

In Inventories Requests, LordSkylark writes:

Would it also be good to mark more of the undetermined entries for deletion?
(As long as they have both variants now listed.)

Some don't even appear in sets. Three examples:

4215 Panel 1 x 4 x 3 (Undetermined Type)
Parts: Panel
Marked for Deletion

[P=bb12v]

3475 Engine, Smooth Small (Undetermined Type)
Parts: Aircraft
Marked for Deletion

Author:

StormChaser

Posted:

Apr 6, 2018 21:28

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

20 times

Topic:

In Inventories Requests, StormChaser writes:

I'll be looking through parts

While I'm thinking about it, terms like "Type 1" and "Type 2" are singularly
unhelpful. For example:

4662 Duplo Hook with Thin Bracing
Parts: DUPLO

15449 Duplo Hook with Thick Bracing
Parts: DUPLO

Author:

StormChaser

Posted:

Apr 6, 2018 21:22

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

25 times

Topic:

In Inventories Requests, StormChaser writes:

I'll be looking through parts
today and submitting title change requests for any other parts like this which
are undetermined, but don't state that in the title.

Is this an undetermined entry or am I missing something?

4820ac01 Duplo Trailer with Frame
Parts: DUPLO, Vehicle

Looks like it may have been replaced by:

4820bc01 Duplo Trailer with Frame with Small Reinforcement
Parts: DUPLO, Vehicle

4820cc01 Duplo Trailer with Frame with Large Reinforcement
Parts: DUPLO, Vehicle

If it ain't so, then the first one probably needs a more descriptive title
because the photo is no help whatsoever.

Author:

ParisianStore

Posted:

Apr 6, 2018 16:37

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

23 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, ParisianStore writes:

Please make changes to the following inventory:

6411-1 (Inv) Sand Dollar Cafe
140 Parts, 5 Minifigures, 1992
Sets: Town: Paradisa

I'm torn on this one between my desire to get the undetermined entries out
of set inventories and the knowledge that used sets on eBay are not reliable
sources.

I did submit a catalog change request to change the title of

2536 Plant, Tree Palm Trunk (Undetermined Type)
Parts: Plant, Tree
Marked for Deletion

to show that it was an undetermined entry. I'll be looking through parts
today and submitting title change requests for any other parts like this which
are undetermined, but don't state that in the title.

Ok, no problem, do the best you decide. I said how I got this set because I think
these pieces are really the original ones. The set is nearly complete and the
pieces seem to be the one from the real box (yellow pieces, used faces...), so
I think the tree is also the real one. But of course, it can have been replaced
by a tree from another box, I can not be sure. And for example, in the tree I
have received, there are only 5 segments, which means that one of them has been
removed (or the current inventory is wrong).

Author:

maggiec

Posted:

Apr 6, 2018 14:05

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

41 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, ParisianStore writes:

Please make changes to the following inventory:

6411-1 (Inv) Sand Dollar Cafe
140 Parts, 5 Minifigures, 1992
Sets: Town: Paradisa

2536 Plant, Tree Palm Trunk (Undetermined Type)
Parts: Plant, Tree
Marked for Deletion

I just looked in my closet couldn't find any

6411-1 (Inv) Sand Dollar Cafe
140 Parts, 5 Minifigures, 1992
Sets: Town: Paradisa

but I did find three open

6416-1 (Inv) Poolside Paradise
211 Parts, 4 Minifigures, 1992
Sets: Town: Paradisa

One (which I bought new) has the trunk segments still sealed in an inner bag.
They are all

2536a Plant, Tree Palm Trunk - Long Indented Connector
Parts: Plant, Tree

One (which has all the parts to the set and nothing else) has all

2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole
Parts: Plant, Tree

but the poster is a bit wrinkled and the price tag looks like it's from a
store I never shopped at, so I suspect I got this from a garage sale. The third
has all the parts and has been built, but still has some of the original inner
bags (open) in the box. It has three

2536a Plant, Tree Palm Trunk - Long Indented Connector
Parts: Plant, Tree

and three

2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole
Parts: Plant, Tree

I know I have more Paradisa sets, but these are just a few I found right away
in my bedroom closet. FWIW,

Maggie

Author:

LordSkylark

Posted:

Apr 6, 2018 14:05

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

23 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, ParisianStore writes:

Please make changes to the following inventory:

6411-1 (Inv) Sand Dollar Cafe
140 Parts, 5 Minifigures, 1992
Sets: Town: Paradisa

2536 Plant, Tree Palm Trunk (Undetermined Type)
Parts: Plant, Tree
Marked for Deletion

Would it also be good to mark more of the undetermined entries for deletion?
(As long as they have both variants now listed.)

Author:

LordSkylark

Posted:

Apr 6, 2018 13:38

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

22 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, ParisianStore writes:

Please make changes to the following inventory:

6411-1 (Inv) Sand Dollar Cafe
140 Parts, 5 Minifigures, 1992
Sets: Town: Paradisa

2536 Plant, Tree Palm Trunk (Undetermined Type)
Parts: Plant, Tree
Marked for Deletion

Thank you. That will also make finding such entries easier.

Author:

StormChaser

Posted:

Apr 6, 2018 13:14

Subject:

Re: Inventory Change Request for Set 6411-1

Viewed:

32 times

Topic:

In Inventories Requests, ParisianStore writes:

Please make changes to the following inventory:

6411-1 (Inv) Sand Dollar Cafe
140 Parts, 5 Minifigures, 1992
Sets: Town: Paradisa

2536 Plant, Tree Palm Trunk (Undetermined Type)
Parts: Plant, Tree
Marked for Deletion

Author:

LordSkylark

Posted:

Apr 6, 2018 12:46

Subject:

Re: Inventory Change Request for Set 7630-1

Viewed:

28 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, normann1974 writes:

Please make changes to the following inventory:

I plan to approve this request.

However, just so that there will be a record for future reference, please specify
the condition of the set when you first acquired it (new sealed, new opened/complete,
new incomplete, or used). Also, please specify if the parts for this set were
mixed with parts for any other sets.

I'm trying to move more in this direction for inventory requests so that
people in the future can have greater knowledge regarding changes made to inventories.
There were many changes made in the past which were not well documented (frequently
due to forum messages attached to change requests not being saved, although they're
permanently saved now).

Thanks.

Thanks for the information.

The earlier sets are all automatic for the jumper variant, as no variant presented
itself so those should be easy to do. Unfortunately, many of the sets would probably
end up staying undermined for awhile when the transition phase to variant B starts
and ends,, due to the fac that many were approved with the undermined variant
even when the set never was intended to have the A variant (or sets that were
marked with the A variant before the B variant was added to the catalog). I'm
not sure the reason (whether time contraint, or ignorance, or accidental, or
something else -- I know that I have made several requests in the past out
of ignorance, so it can be easy to miss some things -- which it why it is
good to have multiple people working together for accountability and verification),
but either way I hope we can all work together to perfect the inventories with
variants.

(Though, I would also strongly caution the administration to make sure that if
a new variant is approved in the catalog, that the other variant is added immediately,
to make sure that we do not run into such situations in the future.)

Thank you for all of your hard work and your prompt responses in the request
changes.

Andrew

Author:

ParisianStore

Posted:

Apr 6, 2018 10:49

Subject:

Inventory Change Request for Set 6411-1

Viewed:

39 times

Topic:

Status:

Open

Please make changes to the following inventory:

6411-1 (Inv) Sand Dollar Cafe
140 Parts, 5 Minifigures, 1992
Sets: Town: Paradisa

Author:

axaday

Posted:

Apr 6, 2018 06:42

Subject:

Inventory Change Request for Set 10738-1

Viewed:

31 times

Topic:

Status:

Open

Please make changes to the following inventory:

10738-1 (Inv) Snow White's Forest Cottage
63 Parts, 1 Minifigure, 2017
Sets: Juniors: Disney: Disney Princess: Snow White

* Change {1 to 2} Part Bright Pink 18853 Friends Accessories Hair Decoration, Flower with Pointed Petals and Pin (Extra)

Author:

Hygrotus

Posted:

Apr 6, 2018 05:33

Subject:

Re: Inventory Change Request for Set 21144-1

Viewed:

29 times

Topic:

In Inventories Requests, StormChaser writes:

In Inventories Requests, gunga writes:

Please make changes to the following inventory:

21144-1 (Inv) The Farm Cottage
537 Parts, 3 Minifigures, 2018
Sets: Minecraft

* Add 1 Part minepig02 Bright Pink Minecraft Pig, Baby - Complete Assembly (Counterpart)

The question here is whether to add a new assembly to the catalog which has the
nametag attached.

I'm inclined to treat this like minifigure assemblies (the complete figure
is inventoried without accessories). I would say the nametag is an accessory
because it can be easily removed and official set photos show the pig without
a nametag.

Therefore, I think it would be reasonable to consider the pig as assembled in
steps 1-3 as the correct assembly for this set and ignore the accessory which
is added in steps 4-5.

I just notice that I replied to this tread but not to the proper one, this one
is active and my reply is at the previous one (which was 4 min earlier posted
with the same request).

Nevermind, I was thinking about it further and I can agree with your argumentation.
Besides that, adding new pig with attached those two parts would means that two
assemblies should be added then to the catalog, with and without sticker, like
for example those in minifig:
[m=sw798]
[m=sw798s]
and it would complicate everything.

BTW this set particular set, did you look also at the horse in this instruction
its assembly has the head added at penultimate step, so bags are aded before
whole assembly is completed. It not yet added but it's pending

minehorse03 (Inv) Minecraft Horse Skeletal / Skeleton (Thin Neck Bracket) - Brick Built
Parts: Animal, Land

without photo currently. So it's a good time.

Marek

Author:

normann1974

Posted:

Apr 6, 2018 05:12

Subject:

Re: Inventory Change Request for Set 7824-1

Viewed:

32 times

Topic:

In Inventories Requests, SezaR writes:

I know that the hinges with hollow studs started to appear in instructions since
1987 but It seems to me that they were in production since 1985.

What do you know about hinges?

Author:

LordSkylark

Posted:

Apr 6, 2018 01:02

Subject:

Inventory Change Request for Set 7191-1

Viewed:

21 times

Topic:

Status:

Open

Please make changes to the following inventory:

7191-1 (Inv) X-wing Fighter - UCS
1300 Parts, 1 Minifigure, 2000
Sets: Star Wars: Ultimate Collector Series: Star Wars Episode 4/5/6

* Change 2 Part Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 3 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 01:01

Subject:

Inventory Change Request for Set 5958-1

Viewed:

17 times

Topic:

Status:

Open

Please make changes to the following inventory:

5958-1 (Inv) Mummy's Tomb
240 Parts, 4 Minifigures, 1998
Sets: Adventurers: Desert

* Change 5 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 01:01

Subject:

Inventory Change Request for Set 6088-1

Viewed:

16 times

Topic:

Status:

Open

Please make changes to the following inventory:

6088-1 (Inv) Robber's Retreat
261 Parts, 4 Minifigures, 1998
Sets: Ninja

* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}
* Change 3 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 01:01

Subject:

Inventory Change Request for Set 6110-1

Viewed:

9 times

Topic:

Status:

Open

Please make changes to the following inventory:

6110-1 (Inv) Solo Sub
18 Parts, 1 Minifigure, 1998
Sets: Aquazone: Hydronauts

* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 01:00

Subject:

Inventory Change Request for Set 2964-1

Viewed:

11 times

Topic:

Status:

Open

Please make changes to the following inventory:

2964-1 (Inv) Space Spider
41 Parts, 1 Minifigure, 1998
Sets: Space: Insectoids

* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 01:00

Subject:

Inventory Change Request for Set 9958-1

Viewed:

12 times

Topic:

Status:

Open

Please make changes to the following inventory:

9958-1 (Inv) Special Elements for Control Lab Building Set (Special Elements For 979701)
97 Parts, 1998
Sets: Educational & Dacta: Service Packs: Special Element Sets

* Change 2 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:57

Subject:

Inventory Change Request for Set 2586-1

Viewed:

8 times

Topic:

Status:

Open

Please make changes to the following inventory:

2586-1 (Inv) King & Throne (Chess King)
21 Parts, 1 Minifigure, 1998
Sets: Castle

* Change 1 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:57

Subject:

Inventory Change Request for Set 2537-1

Viewed:

7 times

Topic:

Status:

Open

Please make changes to the following inventory:

2537-1 (Inv) Extreme Team Raft
15 Parts, 1 Minifigure, 1 Gear, 1998
Sets: Town: Extreme Team

* Change 1 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:56

Subject:

Inventory Change Request for Set 5988-1

Viewed:

6 times

Topic:

Status:

Open

Please make changes to the following inventory:

5988-1 (Inv) Pharaoh's Forbidden Ruins
668 Parts, 10 Minifigures, 1998
Sets: Adventurers: Desert

* Change 4 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:56

Subject:

Inventory Change Request for Set 6589-1

Viewed:

7 times

Topic:

Status:

Open

Please make changes to the following inventory:

6589-1 (Inv) Radical Racer {with Rocky Ridge Playscape}
77 Parts, 1 Minifigure, 1998
Sets: Town: Extreme Team

* Change 1 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:56

Subject:

Inventory Change Request for Set 2531-1

Viewed:

6 times

Topic:

Status:

Open

Please make changes to the following inventory:

2531-1 (Inv) Rescue Helicopter and Jeep
90 Parts, 2 Minifigures, 1998
Sets: Town: Classic Town: Recreation

* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:55

Subject:

Inventory Change Request for Set 6160-1

Viewed:

6 times

Topic:

Status:

Open

Please make changes to the following inventory:

6160-1 (Inv) Sea Scorpion
281 Parts, 3 Minifigures, 1998
Sets: Aquazone: Stingrays

* Change 2 Part Red {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:55

Subject:

Inventory Change Request for Set 2538-1

Viewed:

8 times

Topic:

Status:

Open

Please make changes to the following inventory:

2538-1 (Inv) Fright Knights Fire Cart
16 Parts, 1 Minifigure, 1 Gear, 1998
Sets: Castle: Fright Knights

* Change 1 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:55

Subject:

Inventory Change Request for Set 6180-1

Viewed:

8 times

Topic:

Status:

Open

Please make changes to the following inventory:

6180-1 (Inv) Hydro Search Sub
271 Parts, 4 Minifigures, 1998
Sets: Aquazone: Hydronauts

* Change 4 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:54

Subject:

Inventory Change Request for Set 6415-1

Viewed:

6 times

Topic:

Status:

Open

Please make changes to the following inventory:

6415-1 (Inv) Res-Q Jet-Ski
12 Parts, 1 Minifigure, 1998
Sets: Town: Res-Q

* Change 1 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:54

Subject:

Inventory Change Request for Set 6428-1

Viewed:

6 times

Topic:

Status:

Open

Please make changes to the following inventory:

6428-1 (Inv) Wave Saver polybag
12 Parts, 1 Minifigure, 1998
Sets: Town: Res-Q

* Change 1 Part Yellow {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:54

Subject:

Inventory Change Request for Set 6977-1

Viewed:

9 times

Topic:

Status:

Open

Please make changes to the following inventory:

6977-1 (Inv) Arachnoid Star Base
419 Parts, 4 Minifigures, 1998
Sets: Space: Insectoids

* Change 2 Part Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:53

Subject:

Inventory Change Request for Set 6817-1

Viewed:

9 times

Topic:

Status:

Open

Please make changes to the following inventory:

6817-1 (Inv) Beta Buzzer
28 Parts, 1 Minifigure, 1998
Sets: Space: Insectoids

* Change 1 Part Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:53

Subject:

Inventory Change Request for Set 6905-1

Viewed:

8 times

Topic:

Status:

Open

Please make changes to the following inventory:

6905-1 (Inv) Bi-Wing Blaster
105 Parts, 2 Minifigures, 1998
Sets: Space: Insectoids

* Change 1 Part Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:53

Subject:

Inventory Change Request for Set 6969-1

Viewed:

9 times

Topic:

Status:

Open

Please make changes to the following inventory:

6969-1 (Inv) Celestial Stinger
243 Parts, 3 Minifigures, 1998
Sets: Space: Insectoids

* Change 2 Part Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:52

Subject:

Inventory Change Request for Set 6199-1

Viewed:

10 times

Topic:

Status:

Open

Please make changes to the following inventory:

6199-1 (Inv) Hydro Crystalization Station
449 Parts, 5 Minifigures, 1998
Sets: Aquazone: Hydronauts

* Change 9 Part Blue {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) (Undetermined Type) to 3794a Plate, Modified 1 x 2 with 1 Stud without Groove (Jumper)}

Author:

LordSkylark

Posted:

Apr 6, 2018 00:52

Subject:

Inventory Change Request for Set 9725-1

Viewed:

9 times

Topic:

Status:

Open