Change Item Name from {Slope, Curved 2 x 2 x 2/3 with Large Silver and Black Dirt Pattern (Sticker) - Set 76083} to {Slope, Curved 2 x 2 x 2/3 with Large Silver and Black Dirt Pattern Model Left Side (Sticker) - Set 76083}
Note: This is the model left side sticker added on page 21. The right side sticker is identical but applied upside down on page 60. See https://www.bricklink.com/message.asp?ID=1467621
Note: see if Russell can make sense of this item. It is called “DELETED”.
and since BO’s item number display format is a bit of a mess, it would be helpful to get an ID for that Medium Reddish Violet inflatable boat. is it 4111918 or 4111919?
Change Item Name from {Avengers Trading Card Collection (English) Series 1 - # LE4 Iron Man Limited Edition} to {Avengers Trading Card Collection (English) Series 1 - # LE16 Iron Man Limited Edition} Change Item No from {shav1enLE04} to {shav1enLE16}
Note: The picture shows a card labeled "Limitro", but this is not an English version. "Limited" is written on the English version and the number is LE16. I will also upload the appropriate picture.
Change Item Name from {Tile 2 x 2 with Tickets Yellow Background Pattern (Sticker) - Set 10041} to {Tile 2 x 2 with Tickets Yellow Background Pattern (Sticker) - Set 6390/10041}
Note: Date change to 1980-2003. There is not an entry for this part with the initial 1980 Main Street although it was on the original sticker sheet.
Change Part Color Code 1 for Trans-Green Color to {81800}
Note: alternate design ID 81800. some of these old printed parts are weird. the unprinted part entry gets IDs in both the unprinted version and the decorated version, despite belonging to different parts.
81817 is the other odd one out. this should belong to the aquasharks windscreen.
Change Item Name from {Vehicle, Fairing 1 x 2 Stepped with Two Pins} to {Large Figure Armor Plate, KK Leg Lower Section} Change Category from {Vehicle} to {Large Figure Part}
Note: Part was introduced for the five Knights' Kingdom Large Figures of 2004. Reuse in the remaining 5 sets lack through-line and is simply creative repurposing.
Change Part Color Code 2 for Red Color to {4612532}
Note: This ID was found through Bricks & Pieces. Searching for it gives the results of 4622390, seemingly indicating that they are considered interchangeable. It appears to use the design ID of 54821 rather than 95753, however.
Change Packing Dimensions from {0 x 0 x 0} to {9.9 x 13.4 x 0.03}
Note: This catalog looks like it came either folded or unfolded depending on the set it was included with. The dimensions I submitted are for folded. The unfolded version has the same dimensions as what's listed as the item dimensions.
Change Item Name from {Ball, Bionicle Zamor Sphere with Marbled Trans-Bright Green Pattern} to {Ball, Bionicle Zamor Sphere with Marbled Green Pattern}
Note: This part is the result of marbling Trans-Yellow and Green (TLG 28 Dark Green), as visible in the extreme cases. Trans-Bright Green was not a color in 2006.
Change Part Color Code 1 for Yellow Color to {4193849}
Note: Here’s a cool one. The Orange ID also belongs to this part. I don’t know why their entry has both the cloth part and the decorated cockpit piece.
Change Item Name from {Slope, Curved 4 x 2 x 2 Double with 4 Studs with Animal (Dinosaur / Gorilla) Face Pattern} to {Slope, Curved 4 x 2 x 2 Double with 4 Studs with Medium Orange Animal (Dinosaur / Gorilla) Face Pattern}
Note: This part should be split in 3 different parts as it contains 3 variants for the pattern:
- Light Blue pattern for Blue part
- Light Green pattern for Green part
- Medium Orange pattern for Red and Yellow parts
Note: The Brown and Gray ID numbers are missing because this part number does not belong to this part. 42042 is called “BIONICLE GIMMIC” in the parts database.
The 42042 ID is a catch-all for the various masks used in the 2002-03 Bionicle run, much like the Kraata IDs are a catch-all for the different stages one can find. Each Krana mask should have all 19 ID numbers, including the unused Pearl Black ID. That part was originally supposed to appear in set 8573.
Change Item Dimensions from {38 x 30.5 x 6} to {38 x 30.5 x 11} Change Weight from {1327} to {1484}
Note: An actual sealed set comes with an open top cardboard box. The sorting tray is in the box and the 6cm tub on top of that and a band around the whole thing.
Note: Part ID was found in the official Unity Parts database (m34684) and corresponds with m34685, the part ID for the scarf used by the same minifigure which uses the shield.
Change Item Name from {Homemaker Figure / Maxifigure Headgear Hair Short} to {Hair WITH Side studs}
Note: Hi. there are 2 different versions of this part: one hasn't side studs, one version HAS side studs to attach headgear - see Set 215-1. Sam issue for x196. Both parts should have own dual parts listings for each version.
Change Packing Dimensions from {0.64 x 0.48 x 13.68} to {0.64 x 12.8 x 0.5}
Note: Part 39759 is significantly shorter than the older type 30104 (0.64 x 13.68 x 0.48). Part 30104 should be separated and the new types given as a separate item too. 39759 is matte, but 30104 is shiny. Production ended in 2006 with black color.
