Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | StormChaser | Posted: | Sep 27, 2016 01:47 | Subject: | Re: Add Element ID's to DUPLO minifigs | Viewed: | 34 times | Topic: | Suggestions | |
| In Suggestions, randyf writes:
| Can minifigures have alternate item numbers or not?
|
I'm guessing not. There are 1,308 total items in the catalog with alternate
item numbers. Of those, 172 are sets, 694 are parts, and 442 are gear.
|
|
Author: | randyf | Posted: | Sep 27, 2016 01:42 | Subject: | Re: Add Element ID's to DUPLO minifigs | Viewed: | 34 times | Topic: | Suggestions | |
| In Suggestions, StormChaser writes:
| In Suggestions, Turribrick writes:
| Since DUPLO minifigs are single piece items I see no reason why they can't
have an Element ID / PCC code (other than of course technical reasons in the
BrickLink systems).
|
10 months since your request and counting . . .
If the functionality of multiple areas of the website can be changed significantly,
as was demonstrated possible with the delightful improvements in June, then surely
the addition of single additional information field applicable only to these
figures isn't asking too much.
|
Can minifigures have alternate item numbers or not? If so, adding the Element
IDs as alternate item numbers to these minifigures would be an easy way to accomplish
this goal.
I believe this should also be used for adding Element IDs to all of the game
microfigures such as
as well as the new nanofigures such as
Cheers,
Randy
|
|
Author: | StormChaser | Posted: | Sep 27, 2016 01:27 | Subject: | Re: Add Element ID's to DUPLO minifigs | Viewed: | 32 times | Topic: | Suggestions | |
| In Suggestions, Turribrick writes:
| Since DUPLO minifigs are single piece items I see no reason why they can't
have an Element ID / PCC code (other than of course technical reasons in the
BrickLink systems).
|
10 months since your request and counting . . .
If the functionality of multiple areas of the website can be changed significantly,
as was demonstrated possible with the delightful improvements in June, then surely
the addition of single additional information field applicable only to these
figures isn't asking too much.
|
|
Author: | randyf | Posted: | Sep 26, 2016 10:00 | Subject: | Inventory Change Request for Set 10049-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 42611 Tire 17.5mm D. x 6mm with Shallow Staggered Treads}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out. The changeover occurred around 2010-2011, so all of the early sets must be the old type.
|
|
Author: | randyf | Posted: | Sep 26, 2016 09:59 | Subject: | Inventory Change Request for Set 4620-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 6 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 42611 Tire 17.5mm D. x 6mm with Shallow Staggered Treads}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out. The changeover occurred around 2010-2011, so all of the early sets must be the old type.
|
|
Author: | randyf | Posted: | Sep 26, 2016 09:57 | Subject: | Inventory Change Request for Set 4619-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 6 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 42611 Tire 17.5mm D. x 6mm with Shallow Staggered Treads}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out. The changeover occurred around 2010-2011, so all of the early sets must be the old type.
|
|
Author: | randyf | Posted: | Sep 26, 2016 09:57 | Subject: | Inventory Change Request for Set 4618-1 | Viewed: | 8 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 6 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 42611 Tire 17.5mm D. x 6mm with Shallow Staggered Treads}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out. The changeover occurred around 2010-2011, so all of the early sets must be the old type.
|
|
Author: | randyf | Posted: | Sep 26, 2016 09:55 | Subject: | Inventory Change Request for Set 4617-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 42611 Tire 17.5mm D. x 6mm with Shallow Staggered Treads}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out. The changeover occurred around 2010-2011, so all of the early sets must be the old type.
|
|
Author: | randyf | Posted: | Sep 26, 2016 09:54 | Subject: | Inventory Change Request for Set 4615-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 42611 Tire 17.5mm D. x 6mm with Shallow Staggered Treads}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out. The changeover occurred around 2010-2011, so all of the early sets must be the old type.
|
|
Author: | therobo | Posted: | Sep 26, 2016 05:36 | Subject: | Inventory Change Request for Set 21127-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part minehorse01 Dark Orange Minecraft Animal Complete Assembly - Horse (Counterpart)
|
Author: | therobo | Posted: | Sep 26, 2016 05:34 | Subject: | Inventory Change Request for Set 76058-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 76058stk01b (Not Applicable) Sticker for Set 76058 - North American Version - (27065/6155025) (Alternate) (match ID 1)
* Change 1 Part (Not Applicable) 76058stk01a Sticker for Set 76058 - International Version - (27064/6155023) {match ID 0 to 1}
|
Author: | therobo | Posted: | Sep 26, 2016 05:26 | Subject: | Inventory Change Request for Set 60009-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2340pb060 White Tail 4 x 1 x 3 with White '60009' on Dark Blue Background Pattern on Both Sides (Stickers) - Set 60009 (Counterpart)
|
Author: | therobo | Posted: | Sep 26, 2016 05:25 | Subject: | Inventory Change Request for Set 75871-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 75871stk01a (Not Applicable) Sticker for Set 75871 - International Version - (24746/6141954) (Alternate) (match ID 1)
* Change 1 Part (Not Applicable) 75871stk01b Sticker for Set 75871 - North American Version - (24748/6141955) {match ID 0 to 1}
|
|
Author: | Brixalotl | Posted: | Sep 25, 2016 21:20 | Subject: | Inventory Change Request for Set 76059-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 76059stk01b (Not Applicable) Sticker for Set 76059 - North American Version - (27071/6155067) (Alternate) (match ID 1)
* Change 1 Part (Not Applicable) 76059stk01a Sticker for Set 76059 - International Version - (27070/6155066) {match ID 0 to 1}
Comments from Submitter:
Adding North American version, thanks
|
|
Author: | cosmicray | Posted: | Sep 25, 2016 20:04 | Subject: | Re: ID pic options | Viewed: | 24 times | Topic: | Suggestions | |
| In Suggestions, Buddy03 writes:
| This is just a random suggestion that I think would be cool. It would be nice
if we could costumize the minifigs on the predefined images like to be holding
mugs or being able to change the torsos.
|
I would be happy if we could change the background color. As it is, I believe
all of the predefined set have a black background.
Ray
|
|
Author: | randyf | Posted: | Sep 25, 2016 19:03 | Subject: | Inventory Change Request for Set 75904-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out.
|
|
Author: | randyf | Posted: | Sep 25, 2016 19:02 | Subject: | Inventory Change Request for Set 71222-1 | Viewed: | 9 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out.
|
|
Author: | randyf | Posted: | Sep 25, 2016 18:53 | Subject: | Inventory Change Request for Set 31039-1 | Viewed: | 7 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out.
|
|
Author: | randyf | Posted: | Sep 25, 2016 18:52 | Subject: | Inventory Change Request for Set 30447-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out.
|
|
Author: | randyf | Posted: | Sep 25, 2016 18:51 | Subject: | Inventory Change Request for Set 30446-1 | Viewed: | 7 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out.
|
|
Author: | randyf | Posted: | Sep 25, 2016 18:49 | Subject: | Inventory Change Request for Set 30315-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out.
|
|
Author: | randyf | Posted: | Sep 25, 2016 18:46 | Subject: | Inventory Change Request for Set 42025-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 92409 Tire 17.5mm D. x 6mm with Shallow Staggered Treads - Band Around Center of Tread}
Comments from Submitter:
The old catalog entry for this tire combined two distinct versions. The entry has finally been split, and I will be updating inventories with the correct versions. There will also be counterpart changes in the future after the main parts get sorted out.
|
|
Author: | randyf | Posted: | Sep 25, 2016 11:26 | Subject: | Inventory Change Request for Gear 852845 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* | | 852845 (Inv) Magnet Set, Minifigures SW (3) - Han Solo, Paploo, Scout Trooper - with 2 x 4 Brick Bases blister pack Gear: Magnet: Star Wars |
* Change 1 Part Black {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 25, 2016 11:25 | Subject: | Inventory Change Request for Gear 852552 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | BLUSER_594186 | Posted: | Sep 25, 2016 08:53 | Subject: | ID pic options | Viewed: | 92 times | Topic: | Suggestions | Status: | Discarded | |
| This is just a random suggestion that I think would be cool. It would be nice
if we could costumize the minifigs on the predefined images like to be holding
mugs or being able to change the torsos.
|
Author: | StormChaser | Posted: | Sep 25, 2016 01:28 | Subject: | Inventory Change Request for Set 9606-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory: [S=9606-1]
* Add 1 Book 9604b5 Set 9604 Activity Booklet 5 - Pneumatic Chair and Arm
Comments from Submitter:
Saw an opened set which included card. Card can also be seen in large image of set.
|
Author: | randyf | Posted: | Sep 24, 2016 16:11 | Subject: | Inventory Change Request for Set 75059-1 | Viewed: | 39 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Minifig sw527a R2-D2 (Flat Silver Head, Dark Blue Printing, Lavender Dots) (Alternate) (match ID 2)
* Change 1 Minifig sw527 R2-D2 (Flat Silver Head, Dark Blue Printing, Red Dots) {match ID 0 to 2}
Comments from Submitter:
http://www.bricklink.com/message.asp?ID=1009048
|
Author: | shawnxyz | Posted: | Sep 24, 2016 04:51 | Subject: | Re: Need to be able to set default search setting | Viewed: | 24 times | Topic: | Feedback | |
| | Yes please ... Because for us the first results are usually US based ... with
ridiculous postage.
|
Har har Really, is there a way to set the defaults for the search? Min part
#s would help too.
|
Author: | go4bob | Posted: | Sep 23, 2016 23:37 | Subject: | Inventory Change Request for Set 6180-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Neon Orange Plate, Round 1 x 1 Straight Side (Extra)
|
|
Author: | cosmicray | Posted: | Sep 23, 2016 22:49 | Subject: | Re: PLEASE enable Payment at checkout | Viewed: | 60 times | Topic: | Suggestions | |
| In Suggestions, Cob writes:
| Please make the site upgrade and enable payment at checkout. I have so many
buyers confused on what to do and how to pay. If they had the option to pay
at checkout it would be so much more streamlined and convenient for everyone.
I am fully prepared and ready to handle payment at checkout, I already give my
buyer the maximum they will be charged for shipping in my terms (and yes, I never
charge more than my terms state, even if I would lose money). Therefore, the
buyer already knows the cost of their order at checkout, why can't they pay
at checkout?
Cob
|
One of the things I am discovering about onsite payment, is that is achieves
very little in prodding buyers to complete payment. It saves me maybe 30-60 seconds
per order, but there is no added impetus for the buyer to complete payment quickly.
Therefore I wholeheartedly support this suggestion.
Ray
|
|
Author: | randyf | Posted: | Sep 23, 2016 20:29 | Subject: | Re: Inventory Change Request for Set 4842-1 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, mwright5 writes:
| Please make changes to the following inventory:
* Change 13 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
* Change 9 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
Comments from Submitter:
Hello, I'm trying to provide a change request to have all of the 3794 jumpers changed to 3794b, because that is what is in my set, which I bought new.
Thanks.
|
The jumpers with groove started appearing in 2010, so the first production run
of this set most likely had the ungrooved jumpers. These should be added as alternate
parts instead of outright changes.
Cheers,
Randy
|
|
Author: | mwright5 | Posted: | Sep 23, 2016 19:11 | Subject: | Inventory Change Request for Set 4842-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 13 Part Reddish Brown {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
* Change 9 Part Dark Bluish Gray {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
* Change 1 Part Black {3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) to 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)}
Comments from Submitter:
Hello, I'm trying to provide a change request to have all of the 3794 jumpers changed to 3794b, because that is what is in my set, which I bought new.
Thanks.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:20 | Subject: | Inventory Change Request for Set 852921-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:20 | Subject: | Inventory Change Request for Set 8085-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:19 | Subject: | Inventory Change Request for Set 8077-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Extra)
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:17 | Subject: | Inventory Change Request for Set 7952-20 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Extra)
* Change 2 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:15 | Subject: | Inventory Change Request for Set 7952-4 | Viewed: | 9 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:13 | Subject: | Inventory Change Request for Set 7947-1 | Viewed: | 8 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Pearl Dark Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:12 | Subject: | Inventory Change Request for Set 7946-1 | Viewed: | 9 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Pearl Dark Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:11 | Subject: | Inventory Change Request for Set 7573-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 17:10 | Subject: | Inventory Change Request for Set 7571-1 | Viewed: | 7 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 1 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 01:45 | Subject: | Inventory Change Request for Set 7572-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 3 Part Dark Brown {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 01:44 | Subject: | Inventory Change Request for Set 7569-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Dark Brown {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 01:42 | Subject: | Inventory Change Request for Set 20017-1 | Viewed: | 9 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 01:41 | Subject: | Inventory Change Request for Set 9334-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | Filip4444 | Posted: | Sep 23, 2016 01:40 | Subject: | Wanted list | Viewed: | 93 times | Topic: | Suggestions | Status: | Discarded | |
| Is it possible to add different settings per wanted list?
For example, I want to receive mail notifications when items on my first wanted
list become available in Europe and receive mail notifications when items on
my second wanted list become available in North America.
Many thanks!
|
Author: | randyf | Posted: | Sep 23, 2016 01:40 | Subject: | Inventory Change Request for Set 7952-6 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 23, 2016 01:24 | Subject: | Inventory Change Request for Minifig gb011 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Trans-Green to Trans-Bright Green} bb731 Arm Ghost Slimer, Left
* Change 1 Part {Trans-Green to Trans-Bright Green} bb732 Arm Ghost Slimer, Right
* Change 1 Part {Trans-Green to Trans-Bright Green} 21968pb02 Body Ghost, Slimer with Bright Pink Tongue, Bright Light Yellow Eyes and Top and Bottom Teeth Pattern
Comments from Submitter:
This figure is all Trans-Bright Green and not Trans-Green. The Slimer from LEGO Dimensions is Trans-Green.
|
|
Author: | jennnifer | Posted: | Sep 22, 2016 19:37 | Subject: | Inventory Change Request for Set 4867-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 87421pb001 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Pattern 1 (Sticker) - Set 4842 (Counterpart)
* Add 2 Part 87421pb002 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Pattern 2 (Sticker) - Set 4842 (Counterpart)
* Add 2 Part 87421pb003 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks Pattern 3 (Sticker) - Set 4842 (Counterpart)
Comments from Submitter:
These panels have the same stickers as set 4842-1.
|
|
Author: | criker | Posted: | Sep 22, 2016 18:52 | Subject: | Inventory Change Request for Set 1264-1 | Viewed: | 11 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {1 to 2} Part Yellow 3004 Brick 1 x 2
|
Author: | tanczy | Posted: | Sep 22, 2016 18:15 | Subject: | Inventory Change Request for Set 8853-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 4273a Light Gray Technic, Axle and Pin Connector Toggle Joint Toothed - Without Slots (Alternate) (match ID 1)
Comments from Submitter:
I've an original set with 4273a which is released between 1981 - 1991. Because the set is from 1988, I think it's absolutely normal.
|
|
Author: | Brixalotl | Posted: | Sep 22, 2016 16:54 | Subject: | Inventory Change Request for Set 76056-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87421pb034 Tan Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Brick Wall with Heart and Fountain of Youth Plaque Pattern (Sticker) - Set 76056 (Counterpart)
* Add 1 Part 14769pb142 Tan Tile, Round 2 x 2 with Bottom Stud Holder with Demon Head in Carved Stone Pattern (Sticker) - Set 76056 (Counterpart)
Comments from Submitter:
adding counterparts, thanks
|
|
Author: | randyf | Posted: | Sep 22, 2016 13:37 | Subject: | Inventory Change Request for Set 10193-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 3 Part Pearl Light Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
* Change 3 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} (Alternate)
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 22, 2016 13:33 | Subject: | Inventory Change Request for Set 7097-1 | Viewed: | 10 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Dark Brown {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 22, 2016 13:33 | Subject: | Inventory Change Request for Set 7078-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Dark Brown {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 22, 2016 13:32 | Subject: | Inventory Change Request for Set 8038-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 22, 2016 13:31 | Subject: | Inventory Change Request for Set 7079-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
All evidence from my own sets and online videos and photos up to this point suggests that the newer spear appeared in the second half of 2012. Therefore, I am changing prior years to account for this.
|
|
Author: | randyf | Posted: | Sep 22, 2016 03:51 | Subject: | Inventory Change Request for Set 70155-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Flat Silver {4497u Minifig, Weapon Pike / Spear - Undetermined End to 93789 Minifig, Weapon Pike / Spear - Flat End}
Comments from Submitter:
Online photo and video evidence shows only flat end versions.
|
|
Author: | randyf | Posted: | Sep 22, 2016 03:42 | Subject: | Inventory Change Request for Set 9564-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Pearl Gold {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
My set contained the round end version, and online video and photo evidence also shows that this is the correct version.
|
|
Author: | randyf | Posted: | Sep 22, 2016 03:36 | Subject: | Inventory Change Request for Set 2257-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Pearl Gold {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End}
Comments from Submitter:
Online photo and video evidence shows only round end versions.
|
|
Author: | randyf | Posted: | Sep 22, 2016 03:29 | Subject: | Inventory Change Request for Set 44016-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 93789 Pearl Dark Gray Minifig, Weapon Pike / Spear - Flat End (Alternate) (match ID 1)
* Change 1 Part Pearl Dark Gray {4497u Minifig, Weapon Pike / Spear - Undetermined End to 4497 Minifig, Weapon Pike / Spear - Round End} {match ID 0 to 1}
Comments from Submitter:
My set contained the flat end version, but I found online video evidence that shows that the round end version was included at times.
|
|
Author: | AfolLady | Posted: | Sep 22, 2016 02:05 | Subject: | Re: Showed the total weight in cart | Viewed: | 36 times | Topic: | Suggestions | |
| In Suggestions, lkh81 writes:
| Hi,
It would be good if users are able to see the total weight(item * quantity) whenever
they add anything to their cart.
I am currently doing things via excel. And trying to find the weight of each
individual items.
|
Yes of course, go to your BL page, My Order Setting, and select ''Show
Item Weight''
|
Author: | bb780476 | Posted: | Sep 22, 2016 01:06 | Subject: | Showed the total weight in cart | Viewed: | 109 times | Topic: | Suggestions | Status: | Implemented | |
| Hi,
It would be good if users are able to see the total weight(item * quantity) whenever
they add anything to their cart.
I am currently doing things via excel. And trying to find the weight of each
individual items.
|
|
Author: | Macaronis | Posted: | Sep 21, 2016 17:42 | Subject: | Re: BL Message Invoice Option... | Viewed: | 42 times | Topic: | Suggestions | |
| | | When I saw your Message I thought to myself maybe there is a setting I didn't
have checked. when I go to invoice there are only two options and one is send
to user but that isn't through the BL messaging System, its the one that
sends it directly to email. The other option is email to self. If you want to
send it as a Custom BL message so they get it only on BL I can only do it if
I copy and paste the printed version to then send that invoice message. Hence
why I figured it might be an nice option to have. If there is some hidden option
to make this auto send to the BL message system I could really use a leg up on
that. I've been getting annoyed at having to copy and paste the invoice into
the actual BL message for a buyer. If you know something I do I'd love to
have that secret...
|
Check this page:
http://www.bricklink.com/pref_contact.asp
|
Figures... All these years and I somehow missed this.. Thank you!!!
+10
W
|
|
Author: | therobo | Posted: | Sep 21, 2016 17:36 | Subject: | Re: BL Message Invoice Option... | Viewed: | 44 times | Topic: | Suggestions | |
| In Suggestions, Macaronis writes:
| In Suggestions, edeevo writes:
| In Suggestions, Macaronis writes:
| You know all the years I have been here and it just dawned on me. I dug around
and never saw this as a suggestion or at least I do not think I have.
When Invoicing why not just add the ability as a Check Box to Send as a (BL message
INVOICE), Rather then a Copy and Paste if your someone who sends your invoice
as a BL message rather then a straight email.
All the stuff for this to happen is already in place... just need to make some
code additions to the Invoice window.
W
|
Maybe I'm misunderstanding, but isn't this already in place? When I
send invoices to my Buyers, it is sent as both a BL message *and* an e-mail...
Life is Good.
~Ed.
|
When I saw your Message I thought to myself maybe there is a setting I didn't
have checked. when I go to invoice there are only two options and one is send
to user but that isn't through the BL messaging System, its the one that
sends it directly to email. The other option is email to self. If you want to
send it as a Custom BL message so they get it only on BL I can only do it if
I copy and paste the printed version to then send that invoice message. Hence
why I figured it might be an nice option to have. If there is some hidden option
to make this auto send to the BL message system I could really use a leg up on
that. I've been getting annoyed at having to copy and paste the invoice into
the actual BL message for a buyer. If you know something I do I'd love to
have that secret...
|
Check this page:
http://www.bricklink.com/pref_contact.asp
|
|
Author: | Macaronis | Posted: | Sep 21, 2016 17:30 | Subject: | Re: BL Message Invoice Option... | Viewed: | 35 times | Topic: | Suggestions | |
| In Suggestions, edeevo writes:
| In Suggestions, Macaronis writes:
| You know all the years I have been here and it just dawned on me. I dug around
and never saw this as a suggestion or at least I do not think I have.
When Invoicing why not just add the ability as a Check Box to Send as a (BL message
INVOICE), Rather then a Copy and Paste if your someone who sends your invoice
as a BL message rather then a straight email.
All the stuff for this to happen is already in place... just need to make some
code additions to the Invoice window.
W
|
Maybe I'm misunderstanding, but isn't this already in place? When I
send invoices to my Buyers, it is sent as both a BL message *and* an e-mail...
Life is Good.
~Ed.
|
When I saw your Message I thought to myself maybe there is a setting I didn't
have checked. when I go to invoice there are only two options and one is send
to user but that isn't through the BL messaging System, its the one that
sends it directly to email. The other option is email to self. If you want to
send it as a Custom BL message so they get it only on BL I can only do it if
I copy and paste the printed version to then send that invoice message. Hence
why I figured it might be an nice option to have. If there is some hidden option
to make this auto send to the BL message system I could really use a leg up on
that. I've been getting annoyed at having to copy and paste the invoice into
the actual BL message for a buyer. If you know something I do I'd love to
have that secret...
|
|
Author: | Macaronis | Posted: | Sep 21, 2016 17:20 | Subject: | Re: BL Message Invoice Option... | Viewed: | 31 times | Topic: | Suggestions | |
| In Suggestions, edeevo writes:
| In Suggestions, Macaronis writes:
| You know all the years I have been here and it just dawned on me. I dug around
and never saw this as a suggestion or at least I do not think I have.
When Invoicing why not just add the ability as a Check Box to Send as a (BL message
INVOICE), Rather then a Copy and Paste if your someone who sends your invoice
as a BL message rather then a straight email.
All the stuff for this to happen is already in place... just need to make some
code additions to the Invoice window.
W
|
Maybe I'm misunderstanding, but isn't this already in place? When I
send invoices to my Buyers, it is sent as both a BL message *and* an e-mail...
Life is Good.
~Ed.
|
If this is True then maybe I must be missing something... Hold that thought...
|
|
Author: | edeevo | Posted: | Sep 21, 2016 17:15 | Subject: | Re: BL Message Invoice Option... | Viewed: | 61 times | Topic: | Suggestions | |
| In Suggestions, Macaronis writes:
| You know all the years I have been here and it just dawned on me. I dug around
and never saw this as a suggestion or at least I do not think I have.
When Invoicing why not just add the ability as a Check Box to Send as a (BL message
INVOICE), Rather then a Copy and Paste if your someone who sends your invoice
as a BL message rather then a straight email.
All the stuff for this to happen is already in place... just need to make some
code additions to the Invoice window.
W
|
Maybe I'm misunderstanding, but isn't this already in place? When I
send invoices to my Buyers, it is sent as both a BL message *and* an e-mail...
Life is Good.
~Ed.
|
|
Author: | Vandenbril | Posted: | Sep 21, 2016 06:52 | Subject: | Inventory Change Request for Set 10252-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87994 Black Bar 3L (Bar Arrow) (Extra)
* Add 1 Part 4592c02 Black Lever Small Base with Black Lever (Extra)
* Add 2 Part 3024 Black Plate 1 x 1 (Extra)
* Add 1 Part 4073 Black Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 2 Part 4274 Blue Technic, Pin 1/2 (Extra)
* Add 3 Part 3024 Dark Azure Plate 1 x 1 (Extra)
* Add 3 Part 54200 Dark Azure Slope 30 1 x 1 x 2/3 (Extra)
* Add 3 Part 3070b Dark Azure Tile 1 x 1 with Groove (Extra)
* Add 2 Part 3024 Dark Bluish Gray Plate 1 x 1 (Extra)
* Add 1 Part 4073 Flat Silver Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 98138pb010 Flat Silver Tile, Round 1 x 1 with Gauge with Red Pointer Pattern (Extra)
* Add 1 Part 98138pb033 Flat Silver Tile, Round 1 x 1 with Soda Pop Can Top Pattern (Extra)
* Add 2 Part 48729b Light Bluish Gray Bar 1L with Clip Mechanical Claw, Cut Edges and Hole on One Side (Extra)
* Add 1 Part 3024 Light Bluish Gray Plate 1 x 1 (Extra)
* Add 1 Part 85861 Light Bluish Gray Plate, Round 1 x 1 with Open Stud (Extra)
* Add 1 Part 54200 Light Bluish Gray Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4265c Light Bluish Gray Technic Bush 1/2 Smooth (Extra)
* Add 2 Part 3070b Light Bluish Gray Tile 1 x 1 with Groove (Extra)
* Add 1 Part 24246 Light Bluish Gray Tile 1 x 1 Half Circle Extended (Stadium) with Groove (Extra)
* Add 2 Part 98138 Light Bluish Gray Tile, Round 1 x 1 (Extra)
* Add 2 Part 98138pb058 Light Bluish Gray Tile, Round 1 x 1 with VW Logo Pattern (Extra)
* Add 2 Part 3713 Red Technic Bush (Extra)
* Add 3 Part 3024 Tan Plate 1 x 1 (Extra)
* Add 1 Part 3070b Tan Tile 1 x 1 with Groove (Extra)
* Add 1 Part 54200 Trans-Medium Blue Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4073 Trans-Orange Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 24246 Trans-Orange Tile 1 x 1 Half Circle Extended (Stadium) with Groove (Extra)
* Add 1 Part 3070b Trans-Red Tile 1 x 1 with Groove (Extra)
* Add 2 Part 3024 White Plate 1 x 1 (Extra)
* Add 2 Part 4073 White Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 3070b White Tile 1 x 1 with Groove (Extra)
* Add 2 Part 4265c Yellow Technic Bush 1/2 Smooth (Extra)
* Add 1 Part 3070b Yellow Tile 1 x 1 with Groove (Extra)
|
|
Author: | BigBBricks | Posted: | Sep 21, 2016 03:33 | Subject: | Inventory Change Request for Set 40203-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 53451 Black Barb / Claw / Horn - Small (Extra)
* Add 1 Part 53451 White Barb / Claw / Horn - Small (Extra)
* Add 1 Part 3024 Black Plate 1 x 1 (Extra)
* Add 1 Part 3024 Dark Bluish Gray Plate 1 x 1 (Extra)
* Add 1 Part 3024 Light Bluish Gray Plate 1 x 1 (Extra)
* Add 1 Part 54200 Black Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Dark Purple Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Light Bluish Gray Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 98138pb007 White Tile, Round 1 x 1 with Black Eye with Pupil Pattern (Extra)
Comments from Submitter:
Verified via set build
|
|
Author: | kwitczak | Posted: | Sep 20, 2016 23:14 | Subject: | Inventory Change Request for Set 9474-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30292 Dark Green Flag 7 x 3 with Rod (Counterpart)
* Add 1 Part 30350c Reddish Brown Tile, Modified 2 x 3 with 2 Clips (thick U clips) (Counterpart)
* Add 1 Part 87421 Light Bluish Gray Panel 3 x 3 x 6 Corner Wall without Bottom Indentations (Counterpart)
* Add 1 Part 87421 Light Bluish Gray Panel 3 x 3 x 6 Corner Wall without Bottom Indentations (Counterpart)
* Add 1 Part 87421 Light Bluish Gray Panel 3 x 3 x 6 Corner Wall without Bottom Indentations (Counterpart)
* Add 1 Part 87421 Light Bluish Gray Panel 3 x 3 x 6 Corner Wall without Bottom Indentations (Counterpart)
Comments from Submitter:
Submitting counterparts for items with stickers already applied
|
|
Author: | jennnifer | Posted: | Sep 20, 2016 14:33 | Subject: | Inventory Change Request for Set 4738-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 2454pb116 Light Bluish Gray Brick 1 x 2 x 5 with Bricks with Dark Green Moss Pattern (Sticker) - Set 4738 (Counterpart)
* Add 1 Part 87421pb033 Light Bluish Gray Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Bricks with Dark Green Moss and Portrait on Inside Pattern 1 (Stickers) - Set 473 (Counterpart)
|
|
Author: | bb617011 | Posted: | Sep 20, 2016 13:37 | Subject: | Updated Site Stats, on Statistics page | Viewed: | 128 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| I know this isn't high priority, but I also don't think it should be
too hard to update. Is there a way we can see updated stats since 2013 on the
Statistics page? It helps us understand the health and growth of bricklink, plus
it is super cool.
Thanks!
|
|
Author: | RobErNat | Posted: | Sep 20, 2016 13:16 | Subject: | Re: Inventory Change Request for Minifig cas095 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, therobo writes:
| In Inventories Requests, Fran_ writes:
| In Inventories Requests, therobo writes:
| Have you read the notes on the inventory?
|
Yes I have, but as I said this is not quite right. The original minifigure has
the solid stud head, and the newest ones had the blocked open stud
|
The notes say that early copies have the solid stud head, so it's the same
as you said, just differently worded.
|
As far as I know, minifigs are inventoried with the first head they are 'found'
with.
This means that if someone finds it with a 'b' type head first, then
the fig get's inventoried with that head (alltough it is possible many more
figs are found with the 'c'type head). Occasionaly figs are found with
a 'c' type, and later on people find the 'b' type of heads, but
the figs remain with 'c' type, as that's how they are first found
with...
Following that logic, the 'a' type was 'before' the 'b'
type, so the first one found, is 'a' type, the 'b' type for this
particular fig came much much later. It has only been recently BL inventory admins
started to approve changes from 'b' to 'a' type 'still whished
there would be the 'alternate' head option), so from a logic point of
view the request should be 'approved' by the IA's and the cadmins
should change the note towards Y2K re-issues would carry a 'blocked open
stud', as it would better fit the timeline and current 'policy' on
the heads.
my 2 cents
|
|
Author: | yorbrick | Posted: | Sep 20, 2016 08:43 | Subject: | Re: Inventory Change Request for Minifig cas095 | Viewed: | 32 times | Topic: | Inventories Requests | |
| | Let's put it this way. I find on Bricklink a "complete" set 6067. I buy it.
And then it happens that all the minifigs have blocked open stud heads. But anyway,
according to Bricklink inventary as it is now (with three out of four minifigs
having the blocked open stud heads), the set is correct.
And no, it is not: The 6067 set has solid stud heads, the 100000 set has blocked
open ones.
What do we do?
|
Ask the seller which version the head is.
They won't have two different versions of the same minifigure with different
head studs in the catalogue. There are many instances where sets have come with
both blocked open and recessed studs and only one is catalogued.
You are correct that you might get the wrong head with a complete set. But then
if you reverse it, buyers of 10000-1 would get the wrong heads.
|
|
Author: | Fran_ | Posted: | Sep 20, 2016 08:12 | Subject: | Re: Inventory Change Request for Minifig cas095 | Viewed: | 33 times | Topic: | Inventories Requests | |
| In Inventories Requests, therobo writes:
| The notes say that early copies have the solid stud head, so it's the same
as you said, just differently worded.
|
Let's put it this way. I find on Bricklink a "complete" set 6067. I buy it.
And then it happens that all the minifigs have blocked open stud heads. But anyway,
according to Bricklink inventary as it is now (with three out of four minifigs
having the blocked open stud heads), the set is correct.
And no, it is not: The 6067 set has solid stud heads, the 100000 set has blocked
open ones.
What do we do?
|
|
Author: | therobo | Posted: | Sep 20, 2016 07:01 | Subject: | Re: Inventory Change Request for Minifig cas095 | Viewed: | 43 times | Topic: | Inventories Requests | |
| In Inventories Requests, Fran_ writes:
| In Inventories Requests, therobo writes:
| Have you read the notes on the inventory?
|
Yes I have, but as I said this is not quite right. The original minifigure has
the solid stud head, and the newest ones had the blocked open stud
|
The notes say that early copies have the solid stud head, so it's the same
as you said, just differently worded.
|
Author: | Fran_ | Posted: | Sep 20, 2016 05:24 | Subject: | Re: Inventory Change Request for Minifig cas095 | Viewed: | 36 times | Topic: | Inventories Requests | |
| In Inventories Requests, therobo writes:
| Have you read the notes on the inventory?
|
Yes I have, but as I said this is not quite right. The original minifigure has
the solid stud head, and the newest ones had the blocked open stud
|
Author: | randyf | Posted: | Sep 20, 2016 00:54 | Subject: | Inventory Change Request for Set 30446-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 54200 Black Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4073 Flat Silver Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 60849 Light Bluish Gray Minifig, Utensil Hose Nozzle Elaborate (Extra)
* Add 1 Part 54200 Trans-Black Slope 30 1 x 1 x 2/3 (Extra)
|
|
Author: | Brixalotl | Posted: | Sep 19, 2016 17:33 | Subject: | Inventory Change Request for Set 76057-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 76057stk01b (Not Applicable) Sticker for Set 76057 - North American Version - (27076/6155193) (Alternate) (match ID 2)
* Change 1 Part (Not Applicable) 76057stk01a Sticker for Set 76057 - International Version - (27075/6155192) {match ID 0 to 2}
Comments from Submitter:
adding North American version, thanks
|
|
Author: | jennnifer | Posted: | Sep 19, 2016 10:22 | Subject: | Inventory Change Request for Set 41122-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 3 Part Reddish Brown {14707 Brick, Arch 1 x 12 x 3 Raised Arch to 18838 Brick, Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports}
Comments from Submitter:
Correcting part variation in original inventory.
|
Author: | jennnifer | Posted: | Sep 19, 2016 10:11 | Subject: | Inventory Change Request for Set 41178-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {14707 Brick, Arch 1 x 12 x 3 Raised Arch to 18838 Brick, Arch 1 x 12 x 3 Raised Arch with 5 Cross Supports}
Comments from Submitter:
Correcting error in original inventory.
|
|
Author: | therobo | Posted: | Sep 19, 2016 05:31 | Subject: | Re: Inventory Change Request for Minifig cas095 | Viewed: | 28 times | Topic: | Inventories Requests | |
| In Inventories Requests, Fran_ writes:
| Please make changes to the following inventory:
* Change 1 Part Yellow {3626bp01 Minifig, Head Standard Grin Pattern - Blocked Open Stud to 3626ap01 Minifig, Head Standard Grin Pattern - Solid Stud}
Comments from Submitter:
in the 6067-1 set (Guarded Inn) all the minifigs have solid stud heads, as it was released in 1986 - I have one of this sets.
May be that in the 2001 release of the set (10000-1) the minifigs had the blocked open stud heads, but I am not sure.
|
Have you read the notes on the inventory?
|
|
Author: | Fran_ | Posted: | Sep 19, 2016 04:55 | Subject: | Re: Inventory Change Request for Minifig cas095 | Viewed: | 30 times | Topic: | Inventories Requests | |
| | Hi
correct, the from 1986 set has the solid stud head and the from 2001 set the
blocked open stud head.
But don't know what the rule is at this moment that this request will be
ok or not.
Stefaan
|
Or maybe we should add the two head types in these minifig inventories as alternate
items? I don't know, the thing is that the minifig with the blocked open
stud is not quite right if you are putting together the 1986 set...
|
|
Author: | randyf | Posted: | Sep 19, 2016 03:10 | Subject: | Inventory Change Request for Set 76065-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {2 to 1} Part Flat Silver 2343 Minifig, Utensil Goblet (Extra)
Comments from Submitter:
My sons and I have three copies of this set, and all of them had only one extra goblet. An extra goblet is weird as it is, but having 2 extras in such a small set instead of 1 seems very odd.
|
Author: | Kalmyr | Posted: | Sep 19, 2016 01:44 | Subject: | Re: changing adding a second address | Viewed: | 34 times | Topic: | Suggestions | |
| Better yet, I think it would be useful to be able to have 2 addresses saved in
account info and then select one at check-out.
|
|
Author: | yorbrick | Posted: | Sep 18, 2016 12:35 | Subject: | Re: Add checkboxes for "no additional fees" | Viewed: | 51 times | Topic: | Suggestions | |
| In Suggestions, OOO_Shiny writes:
| I would love to have checkboxes for "no additional fees" and "charges actual
postage only" when searching to buy, both individual items and for the wanted
list search. Alternatly, a max additional fee amount would be good. And a pipe
dream of "shipping included", since I don't know if any other stores are
offering this.
It would let me (and my customers) know if the store I'm looking at is *really*
offering the lowest price, or if they are going to tack on several dollars worth
of lot fees, handling fees, packaging fees, etc. In which case, the forth, fifth,
or tenth store down the list would be a better deal for me. Yes, I can find
this info in the store terms, but I have to go through each one to do so.
If I had checkboxes for
[] No additional fees
[] Free shipping
I am sure that it would drive many more customers to my store, who never get
to see OOO_Shiny pop up in their search results otherwise.
It would also encourage more stores to have these policies, which I really believe
benefit the customers, and would improve the overall bricklink experience.
Thanks for consideration and feedback.
OOO_Shiny
|
What does "charges actual postage" mean? This would need to be spelled out exactly
by bricklink. For example, is it just the stamps cost, stamps plus VAT where
a seller needs to charge VAT, stamps plus the packaging cost, etc.
|
|
Author: | Brickwilbo | Posted: | Sep 18, 2016 08:50 | Subject: | Re: Green Dot notifications on My Store and My BL | Viewed: | 57 times | Topic: | Suggestions | |
| In Suggestions, Cob writes:
| In Suggestions, Brickwilbo writes:
|
I believed both green dots meant I was logged in.
|
Author: | Cob | Posted: | Sep 18, 2016 08:45 | Subject: | Re: Green Dot notifications on My Store and My BL | Viewed: | 40 times | Topic: | Suggestions | |
| In Suggestions, Brickwilbo writes:
No change in setting turns them off.
|
Author: | Cob | Posted: | Sep 18, 2016 08:44 | Subject: | Re: Green Dot notifications on My Store and My BL | Viewed: | 55 times | Topic: | Suggestions | |
| In Suggestions, Brickwilbo writes:
|
|
|
Author: | elias3 | Posted: | Sep 18, 2016 08:14 | Subject: | Re: Inventory Change Request for Minifig cas095 | Viewed: | 37 times | Topic: | Inventories Requests | |
| In Inventories Requests, Fran_ writes:
| Please make changes to the following inventory:
* Change 1 Part Yellow {3626bp01 Minifig, Head Standard Grin Pattern - Blocked Open Stud to 3626ap01 Minifig, Head Standard Grin Pattern - Solid Stud}
Comments from Submitter:
in the 6067-1 set (Guarded Inn) all the minifigs have solid stud heads, as it was released in 1986 - I have one of this sets.
May be that in the 2001 release of the set (10000-1) the minifigs had the blocked open stud heads, but I am not sure.
|
Hi
correct, the from 1986 set has the solid stud head and the from 2001 set the
blocked open stud head.
But don't know what the rule is at this moment that this request will be
ok or not.
Stefaan
|
|
Author: | RobErNat | Posted: | Sep 18, 2016 07:25 | Subject: | Inventory Change Request for Set 6278-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 10 Part Brown {2536 Plant, Tree Palm Trunk to 2536b Plant, Tree Palm Trunk - Short Connector, no Axle Hole}
Comments from Submitter:
from mint in box set content
|
|
Author: | Fran_ | Posted: | Sep 18, 2016 07:22 | Subject: | Inventory Change Request for Minifig cas095 | Viewed: | 82 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Yellow {3626bp01 Minifig, Head Standard Grin Pattern - Blocked Open Stud to 3626ap01 Minifig, Head Standard Grin Pattern - Solid Stud}
Comments from Submitter:
in the 6067-1 set (Guarded Inn) all the minifigs have solid stud heads, as it was released in 1986 - I have one of this sets.
May be that in the 2001 release of the set (10000-1) the minifigs had the blocked open stud heads, but I am not sure.
|
|
Author: | korakot | Posted: | Sep 18, 2016 05:01 | Subject: | Order by weight | Viewed: | 115 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| I want to order many Duplo parts. They are so heavy that the shipping cost is
higher than the price it self.
So, I want to search a store (or all stores in a country) for "Duplo" parts order
by "price per weight" up (price/weight). Finging those parts which are cheap
(relative to their weight).
This 'price density' is a bit too strange.
Therefore, I will request feature of ordering by 'weight' alone.
(I can then compare the price density mentally on my own)
Thank you.
|
|
Author: | Brickwilbo | Posted: | Sep 18, 2016 04:38 | Subject: | Re: Green Dot notifications on My Store and My BL | Viewed: | 74 times | Topic: | Suggestions | |
| In Suggestions, Brickwilbo writes:
http://www.bricklink.com/mySettings.asp?viewFrom=P
| In Suggestions, Cob writes:
| Please allow customization of the green dot notifications on My Store and My
BL.
These green dot represents a call to action, however improperly notifying a user
of an action to perform causes them to ignore the green dot notification.
Example, I package an order on Saturday afternoon, I cannot ship until Monday
morning. The green dot provides a call to action to mark the package as shipped.
I can't, it is Saturday afternoon and there is no mail service. If go ahead
and mark the package as shipped, two things then happen.
1. The buyer immediately receives a green dot call to action notification to
mark the package as received.
Well, how can they? It is Saturday afternoon and the next mail service will
not run until Monday. So now for until at least Monday, the green dot notification
is completely useless.
2. Next if I mark the order as shipped on a Saturday afternoon, I immediately
get the green dot call to action notification to send the drive thru notification.
When I do this the buyer will get notified that I shipped the package....but
I didn't ship package because it is Saturday afternoon. There is no mail
service until Monday morning. So I send the drive thru notification on a Saturday
afternoon I am not being truthful to the buyer as I have stated that the package
has been shipped. (BTW BL's default drive thru states that the package has
been shipped).
The ability to turn on of off the notifications or provide a time lag of the
notifications would be greatly appreciated and make them useful.
Thank you,
Cob
|
|
|
|
Author: | Brickwilbo | Posted: | Sep 18, 2016 04:32 | Subject: | Re: Green Dot notifications on My Store and My BL | Viewed: | 56 times | Topic: | Suggestions | |
| Which green dots?
In Suggestions, Cob writes:
| Please allow customization of the green dot notifications on My Store and My
BL.
These green dot represents a call to action, however improperly notifying a user
of an action to perform causes them to ignore the green dot notification.
Example, I package an order on Saturday afternoon, I cannot ship until Monday
morning. The green dot provides a call to action to mark the package as shipped.
I can't, it is Saturday afternoon and there is no mail service. If go ahead
and mark the package as shipped, two things then happen.
1. The buyer immediately receives a green dot call to action notification to
mark the package as received.
Well, how can they? It is Saturday afternoon and the next mail service will
not run until Monday. So now for until at least Monday, the green dot notification
is completely useless.
2. Next if I mark the order as shipped on a Saturday afternoon, I immediately
get the green dot call to action notification to send the drive thru notification.
When I do this the buyer will get notified that I shipped the package....but
I didn't ship package because it is Saturday afternoon. There is no mail
service until Monday morning. So I send the drive thru notification on a Saturday
afternoon I am not being truthful to the buyer as I have stated that the package
has been shipped. (BTW BL's default drive thru states that the package has
been shipped).
The ability to turn on of off the notifications or provide a time lag of the
notifications would be greatly appreciated and make them useful.
Thank you,
Cob
|
|
|
Author: | Cob | Posted: | Sep 17, 2016 20:18 | Subject: | Green Dot notifications on My Store and My BL | Viewed: | 196 times | Topic: | Suggestions | Status: | Implemented | |
| Please allow customization of the green dot notifications on My Store and My
BL.
These green dot represents a call to action, however improperly notifying a user
of an action to perform causes them to ignore the green dot notification.
Example, I package an order on Saturday afternoon, I cannot ship until Monday
morning. The green dot provides a call to action to mark the package as shipped.
I can't, it is Saturday afternoon and there is no mail service. If go ahead
and mark the package as shipped, two things then happen.
1. The buyer immediately receives a green dot call to action notification to
mark the package as received.
Well, how can they? It is Saturday afternoon and the next mail service will
not run until Monday. So now for until at least Monday, the green dot notification
is completely useless.
2. Next if I mark the order as shipped on a Saturday afternoon, I immediately
get the green dot call to action notification to send the drive thru notification.
When I do this the buyer will get notified that I shipped the package....but
I didn't ship package because it is Saturday afternoon. There is no mail
service until Monday morning. So I send the drive thru notification on a Saturday
afternoon I am not being truthful to the buyer as I have stated that the package
has been shipped. (BTW BL's default drive thru states that the package has
been shipped).
The ability to turn on of off the notifications or provide a time lag of the
notifications would be greatly appreciated and make them useful.
Thank you,
Cob
|
|
Author: | bb692692 | Posted: | Sep 17, 2016 18:48 | Subject: | Re: Add checkboxes for "no additional fees" | Viewed: | 53 times | Topic: | Suggestions | |
| In Suggestions, SylvainLS writes:
That seems to be a skill I should develop.
This seems to be my third post this week that would have been answered with a
search. Apparently, my thoughts aren't as original as I think they are!
OOO_Shiny
|
|
Author: | FigBits | Posted: | Sep 17, 2016 17:33 | Subject: | Re: Add checkboxes for "no additional fees" | Viewed: | 48 times | Topic: | Suggestions | |
| In Suggestions, OOO_Shiny writes:
| I would love to have checkboxes for "no additional fees" and "charges actual
postage only" when searching to buy, both individual items and for the wanted
list search. Alternatly, a max additional fee amount would be good.
|
I don't think we need yet another way-point on the road to auto-checkout.
We just need to skip to the finish line. Once auto-checkout exists, all those
problems are solved.
--
Marc.
And a pipe
| dream of "shipping included", since I don't know if any other stores are
offering this.
It would let me (and my customers) know if the store I'm looking at is *really*
offering the lowest price, or if they are going to tack on several dollars worth
of lot fees, handling fees, packaging fees, etc. In which case, the forth, fifth,
or tenth store down the list would be a better deal for me. Yes, I can find
this info in the store terms, but I have to go through each one to do so.
If I had checkboxes for
[] No additional fees
[] Free shipping
I am sure that it would drive many more customers to my store, who never get
to see OOO_Shiny pop up in their search results otherwise.
It would also encourage more stores to have these policies, which I really believe
benefit the customers, and would improve the overall bricklink experience.
Thanks for consideration and feedback.
OOO_Shiny
|
|
|
Author: | SylvainLS | Posted: | Sep 17, 2016 17:33 | Subject: | Re: Add checkboxes for "no additional fees" | Viewed: | 44 times | Topic: | Suggestions | |
| In Suggestions, OOO_Shiny writes:
| Bump?
Anyone else have an opinion on this?
|
Some have: http://www.bricklink.com/messageThread.asp?ID=173897
Yes, I’m learning to search in forum posts
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|