Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Saitobricks.ca | Posted: | May 9, 2024 21:16 | Subject: | Inventory Change Request for Set 41167-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 87079pb1331 Reddish Brown Tile 2 x 4 with Holographic Arendelle Crest Flower and Border Pattern (Sticker) - Set 41167 (Counterpart)
* Add 1 Part 26603pb383 Medium Nougat Tile 2 x 3 with White Anna Silhouette on Magenta Background in Gold Frame Pattern (Sticker) - Set 41167 (Counterpart)
* Add 1 Part 26603pb382 Medium Nougat Tile 2 x 3 with White Elsa Silhouette on Magenta Background in Gold Frame Pattern (Sticker) - Set 41167 (Counterpart)
* Add 2 Part 3068pb2344 White Tile 2 x 2 with Cushion with Dark Turquoise Leaves, Magenta Dots and Button Pattern (Sticker) - Set 41167 (Counterpart)
* Add 1 Part 3068pb2343 White Tile 2 x 2 with Bright Light Orange Diagonal Stripes and Holographic Magenta Ribbon with Bow Pattern (Sticker) - Set 41167 (Counterpart)
* Add 1 Part 22385pb319 Reddish Brown Tile, Modified 2 x 3 Pentagonal with Holographic Arendelle Crest Flower on Magenta and Bright Light Orange Background Pattern (Sticker) - Set 41167 (Counterpart)
* Add 1 Part 6179pb238 White Tile, Modified 4 x 4 with Studs on Edge with Medium Lavender Blanket with Holographic Dark Pink Ice Crystal Flowers Pattern (Sticker) - Set 41167 (Counterpart)
Comments from Submitter:
In order of addition,
Book 1, pages 64, 65
Book 2, page 27
Book 2, page 28
Book 1, pages 8, 10
Book 2, page 79
Book 2, page 54
Book 2, page 84
|
|
Author: | Roboriders | Posted: | May 9, 2024 21:11 | Subject: | Inventory Change Request for Set 880012-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 32360 Metallic Gold Technic, Disk 5 x 5 - RoboRider Talisman Wheel, Laser Mold (Alternate)
Comments from Submitter:
One of 9 known metallic gold RoboRider talisman wheels (Technic, Disk 5 x 5) are randomly included in each set.
|
Author: | Roboriders | Posted: | May 9, 2024 21:11 | Subject: | Inventory Change Request for Set 880011-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 32360 Metallic Gold Technic, Disk 5 x 5 - RoboRider Talisman Wheel, Laser Mold (Alternate)
Comments from Submitter:
One of 9 known metallic gold RoboRider talisman wheels (Technic, Disk 5 x 5) are randomly included in each set.
|
Author: | Roboriders | Posted: | May 9, 2024 21:10 | Subject: | Inventory Change Request for Set 880010-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 32360 Metallic Gold Technic, Disk 5 x 5 - RoboRider Talisman Wheel, Laser Mold (Alternate)
Comments from Submitter:
One of 9 known metallic gold RoboRider talisman wheels (Technic, Disk 5 x 5) are randomly included in each set.
|
|
Author: | randyf | Posted: | May 9, 2024 21:09 | Subject: | Re: How to add sounds to catalog | Viewed: | 33 times | Topic: | Catalog Requests | |
| In Catalog Requests, Saitobricks.ca writes:
| In Catalog Requests, Saitobricks.ca writes:
| How do I add sound to the catalog?
I want to add the sound for
And yes I do own this item.
|
Any solutions yet?
|
We have talked about it since
https://www.bricklink.com/message.asp?ID=1274615
At BrickLink speed, it may be fixed in another 4-5 years.
|
|
Author: | peregrinator | Posted: | May 9, 2024 20:59 | Subject: | Re: New here. Where do I go | Viewed: | 34 times | Topic: | Catalog Identification | |
| In Catalog Identification, MelanieSnodgras writes:
| I bought some Lego bags at a garage sale. I need help trying to figure out what
set they belong to. My grandson and I like to pit the together although this
one has me stumped.
|
Sealed bags? If you post a picture I'm sure someone will help you here, alternately
you can look up the part numbers and use this (admittedly not easy to use) form:
https://www.bricklink.com/catalogIn.asp
It's very possible there are multiple sets involved.
I love that you and your grandson share this hobby!
|
|
Author: | Dhobeck | Posted: | May 9, 2024 20:56 | Subject: | Re: New here. Where do I go | Viewed: | 29 times | Topic: | Catalog Identification | |
| In Catalog Identification, MelanieSnodgras writes:
| I bought some Lego bags at a garage sale. I need help trying to figure out what
set they belong to. My grandson and I like to pit the together although this
one has me stumped.
|
Are they sealed bags or just unsorted bulk Lego? If the latter use brick recognize
on any decorated or stickered parts to narrow the possible sets
https://brickognize.com/
|
Author: | Saitobricks.ca | Posted: | May 9, 2024 20:55 | Subject: | Re: New here. Where do I go | Viewed: | 30 times | Topic: | Catalog Identification | |
| In Catalog Identification, MelanieSnodgras writes:
| I bought some Lego bags at a garage sale. I need help trying to figure out what
set they belong to. My grandson and I like to pit the together although this
one has me stumped.
|
Pictures please.
|
Author: | Saitobricks.ca | Posted: | May 9, 2024 20:55 | Subject: | Re: How to add sounds to catalog | Viewed: | 23 times | Topic: | Catalog Requests | |
| In Catalog Requests, Saitobricks.ca writes:
| How do I add sound to the catalog?
I want to add the sound for
And yes I do own this item.
|
Any solutions yet?
|
Author: | MelanieSnodgras | Posted: | May 9, 2024 20:51 | Subject: | New here. Where do I go | Viewed: | 116 times | Topic: | Catalog Identification | |
| I bought some Lego bags at a garage sale. I need help trying to figure out what
set they belong to. My grandson and I like to pit the together although this
one has me stumped.
|
Author: | Nubs_Select | Posted: | May 9, 2024 20:31 | Subject: | Re: I tried an experiment, and it's 2 for 2. | Viewed: | 51 times | Topic: | Feedback | |
| In Feedback, Ziegelmeister writes:
| In Feedback, Nubs_Select writes:
| | And ironically my wife just walked in with pizza so I'm going to go celebrate
with pizza.
|
good choice!
|
Just making sure you're reading.
|
always
|
Author: | Ziegelmeister | Posted: | May 9, 2024 20:29 | Subject: | Re: I tried an experiment, and it's 2 for 2. | Viewed: | 29 times | Topic: | Feedback | |
| In Feedback, Nubs_Select writes:
| | And ironically my wife just walked in with pizza so I'm going to go celebrate
with pizza.
|
good choice!
|
Just making sure you're reading.
|
Author: | Dhobeck | Posted: | May 9, 2024 20:29 | Subject: | Re: I tried an experiment, and it's 2 for 2. | Viewed: | 22 times | Topic: | Feedback | |
| In Feedback, Nubs_Select writes:
| | And ironically my wife just walked in with pizza so I'm going to go celebrate
with pizza.
|
good choice!
|
Pizzzzzzaaaaaaaaa
|
|
Author: | Saitobricks.ca | Posted: | May 9, 2024 20:21 | Subject: | Re: I tried an experiment, and it's 2 for 2. | Viewed: | 29 times | Topic: | Feedback | |
| In Feedback, Ziegelmeister writes:
| In Feedback, Adjour writes:
And ironically my wife just walked in with pizza so I'm going to go celebrate
with pizza.
|
🍕🍕🍕
|
Author: | Nubs_Select | Posted: | May 9, 2024 20:19 | Subject: | Re: I tried an experiment, and it's 2 for 2. | Viewed: | 28 times | Topic: | Feedback | |
| | And ironically my wife just walked in with pizza so I'm going to go celebrate
with pizza.
|
good choice!
|
Author: | Ziegelmeister | Posted: | May 9, 2024 20:17 | Subject: | Re: I tried an experiment, and it's 2 for 2. | Viewed: | 35 times | Topic: | Feedback | |
| In Feedback, Adjour writes:
RIGHT!?!? I retired young and one of the biggest things I miss is seeing the
impact my work made, so this is a small victory for after the week I've had
(power and internet has been out since the storms/tornados on Tuesday.
We just hit 25,000,000 orders on April 17th, so that store at the bottom finally
got their feedback.
And ironically my wife just walked in with pizza so I'm going to go celebrate
with pizza.
|
|
Author: | Adjour | Posted: | May 9, 2024 20:05 | Subject: | Re: I tried an experiment, and it's 2 for 2. | Viewed: | 52 times | Topic: | Feedback | |
| In Feedback, Ziegelmeister writes:
| Just wanted to follow up. I had a slow few weeks and then had 25 orders over
last weekend. Lots of 0 feedback new buyers and I was too busy to remember to
put the letter in each package.
However, I spot checked one person who left feedback today and went to their
"feedback left for others" tab and was beside myself when I saw the screen
shot below. They received their package today, and left feedback for myself
and 6 other stores today too.
|
haha, success!
|
|
Author: | Ziegelmeister | Posted: | May 9, 2024 19:44 | Subject: | Re: Do most buyers not give feedback? | Viewed: | 35 times | Topic: | Feedback | |
| In Feedback, Adjour writes:
| I have a regular that never leaves anyone feedback. Also, in many orders, we
have never communicated at all. She places decent sized orders. I don't dare
poke the bear and ask why
|
LOL! No I wouldn't either. Clearly they know your value and keep coming
back.
Check out this thread from a month ago and look at the last post from a few minutes
ago. I'm going to go back and look at all the other new buyers to see if
they're doing the same. https://www.bricklink.com/message.asp?ID=1462614
|
|
Author: | Ziegelmeister | Posted: | May 9, 2024 19:42 | Subject: | Re: I tried an experiment, and it's 2 for 2. | Viewed: | 62 times | Topic: | Feedback | |
| Just wanted to follow up. I had a slow few weeks and then had 25 orders over
last weekend. Lots of 0 feedback new buyers and I was too busy to remember to
put the letter in each package.
However, I spot checked one person who left feedback today and went to their
"feedback left for others" tab and was beside myself when I saw the screen
shot below. They received their package today, and left feedback for myself
and 6 other stores today too.
|
|
|
Author: | peregrinator | Posted: | May 9, 2024 19:38 | Subject: | Re: Do most buyers not give feedback? | Viewed: | 28 times | Topic: | Feedback | |
| In Feedback, Dhobeck writes:
| In Feedback, Ziegelmeister writes:
| Lots of discussion about your terms, but that would mostly impact the amount
of orders you get. Hopefully with the changes you're planning to make you'll
have more orders coming in.
To your question though, it's frustrating as hell; especially as a new store.
60% seems to be the norm lately.
|
I’m averaging about 64% but I have had fewer orders than you
|
Early on I was at 70% or so but now just under 60%
|
|
Author: | Adjour | Posted: | May 9, 2024 19:30 | Subject: | Re: Do most buyers not give feedback? | Viewed: | 37 times | Topic: | Feedback | |
| In Feedback, Ziegelmeister writes:
| I did a deep dive recently with my own orders and there are several buyers with
8xx, 1xxx even 2xxx+ feedback who have left exactly ZERO feedbacks to any other
user. Other people tend to do it all at once at the end of every month. Hopefully
some of your missing ones are the latter group.
|
I have a regular that never leaves anyone feedback. Also, in many orders, we
have never communicated at all. She places decent sized orders. I don't dare
poke the bear and ask why
I did also notice a first timer (to my store) that also left zero feedback anywhere.
TBH I almost never leave Ebay feedback anymore, so I don't complain. I only
do it here and on Mercari (because they force you to)
Crystal
|
|
Author: | Dhobeck | Posted: | May 9, 2024 19:10 | Subject: | Re: Do most buyers not give feedback? | Viewed: | 29 times | Topic: | Feedback | |
| In Feedback, Ziegelmeister writes:
| Lots of discussion about your terms, but that would mostly impact the amount
of orders you get. Hopefully with the changes you're planning to make you'll
have more orders coming in.
To your question though, it's frustrating as hell; especially as a new store.
60% seems to be the norm lately.
|
I’m averaging about 64% but I have had fewer orders than you
| I do everything I can to go above and beyond
with communications, shipping times and packaging and I just can't seem to
close in on Popsicle's 75%.
I did a deep dive recently with my own orders and there are several buyers with
8xx, 1xxx even 2xxx+ feedback who have left exactly ZERO feedbacks to any other
user.
|
I have had some of those as well but only with 30-60 feedback.
| Other people tend to do it all at once at the end of every month. Hopefully
some of your missing ones are the latter group.
|
|
|
Author: | Ziegelmeister | Posted: | May 9, 2024 18:54 | Subject: | Re: Do most buyers not give feedback? | Viewed: | 45 times | Topic: | Feedback | |
| Lots of discussion about your terms, but that would mostly impact the amount
of orders you get. Hopefully with the changes you're planning to make you'll
have more orders coming in.
To your question though, it's frustrating as hell; especially as a new store.
60% seems to be the norm lately. I do everything I can to go above and beyond
with communications, shipping times and packaging and I just can't seem to
close in on Popsicle's 75%.
I did a deep dive recently with my own orders and there are several buyers with
8xx, 1xxx even 2xxx+ feedback who have left exactly ZERO feedbacks to any other
user. Other people tend to do it all at once at the end of every month. Hopefully
some of your missing ones are the latter group.
|
|
Author: | UTLF | Posted: | May 9, 2024 18:17 | Subject: | Re: Continued Forum Spam | Viewed: | 51 times | Topic: | General | |
| | But UTLF point may be that time, energy and money spent on those weren't
used to fix or upgrade our day to day use of the current BrickLink.
For a few years we only see as upgrades: more taxes, documents and procedures
to follow.
I don't blame BrickLink, it's everywhere - the legalized income pressure
gets higher and higher on small people, with nothing/few in compensation.
|
Yeah, that's what I was getting at: pouring resources into useless changes
that nobody asked for and acting like they're doing work when the important
stuff gets swept under the rug
But hey, make sure you pay your seller fees or else we'll shut your store
down! We need to fund more useless projects instead of tackling things people
have been asking for for years now!
|
|
Author: | Saitobricks.ca | Posted: | May 9, 2024 17:42 | Subject: | Re: Super highway | Viewed: | 37 times | Topic: | Off Topic | |
| In Off Topic, wildchicken13 writes:
| In Off Topic, Saitobricks.ca writes:
| Aaa… the difference it can make when your country is built around a invention
|
To be fair, before World War II, trains were the dominant form of overland travel
in America and cities tended to be small and dense, kind of like European cities.
However, this country has grown a lot since then and new development tends to
be more centered around automobiles. Much the same is true of Canada.
|
Not really, if you may notice Canada doesn’t have a lot of big highways like
the states, and most of our roads are just two lane.
|
|
Author: | Saitobricks.ca | Posted: | May 9, 2024 17:40 | Subject: | Re: Continued Forum Spam | Viewed: | 35 times | Topic: | General | |
| In General, 1001bricks writes:
| In General, SylvainLS writes:
| In General, UTLF writes:
none of these touches the old spaghetti code:
— the MOC Pop-up Shop is (was/will be again?) on the v2/v3 part of the website,
— the Studio forum is totally separate code but for the shared authentication
which is on the v2/v3 side,
— ditto BDP, which is also, IIUC, how BL is making money and why TLG bought BL,
— and the merges don’t touch the code at all, which is why it’s painfully done
manually over several months rather than with a simple scripted database update
in one fell.
|
Agreed with this - and I love the recent Catalog merges.
|
| But UTLF point may be that time, energy and money spent on those weren't
used to fix or upgrade our day to day use of the current BrickLink.
For a few years we only see as upgrades: more taxes, documents and procedures
to follow.
I don't blame BrickLink, it's everywhere - the legalized income pressure
gets higher and higher on small people, with nothing/few in compensation.
|
Finally some thing we all can agree on.
|
|
Author: | 1001bricks | Posted: | May 9, 2024 17:35 | Subject: | Re: Buyer hasn't received item, I have POP | Viewed: | 49 times | Topic: | Selling | |
| In Selling, Nubs_Select writes:
| In Selling, AppleMacJack writes:
| Hopefully this is the right space to ask this:
My buyer has messaged stating they haven't received their item - I have proof
of posting but no tracking info and have already submitted a missing letter claim
with Royal Mail.
I'm wondering what I should do:
1. refund the buyer and hope Royal Mail don't tell me they've already
delivered the item?;
2. wait for Royal Mail to respond which could take another few days, and my buyer
has already sent several messages as they want their items?
Any advice would be appreciated!
|
wait until you get a reply from Royal Mail then if they find it let the customer
know and if they dont then refund them.
|
Yes/no - I wouldn't wait if the delay's already clearly abnormal, like
2x or 3x the normal delay (seller to decide what's "normal".
It may still arrive, and sometimes the buyer will wrote you back and repay the
order again when refunded!
Or they won't tell you, but they know you're truthy and reliable and
maybe they'll be your buyer for life - which has no price
All in all, making buyers happy has a positive effect on the whole community;
it's not only your shop
|
|
Author: | Nubs_Select | Posted: | May 9, 2024 17:15 | Subject: | Re: Buyer hasn't received item, I have POP | Viewed: | 40 times | Topic: | Selling | |
| In Selling, AppleMacJack writes:
| Hopefully this is the right space to ask this:
My buyer has messaged stating they haven't received their item - I have proof
of posting but no tracking info and have already submitted a missing letter claim
with Royal Mail.
I'm wondering what I should do:
1. refund the buyer and hope Royal Mail don't tell me they've already
delivered the item?;
2. wait for Royal Mail to respond which could take another few days, and my buyer
has already sent several messages as they want their items?
Any advice would be appreciated!
|
wait until you get a reply from Royal Mail then if they find it let the customer
know and if they dont then refund them.
|
|
Author: | yorbrick | Posted: | May 9, 2024 17:04 | Subject: | Re: Buyer hasn't received item, I have POP | Viewed: | 36 times | Topic: | Selling | |
| In Selling, AppleMacJack writes:
| Hopefully this is the right space to ask this:
My buyer has messaged stating they haven't received their item - I have proof
of posting but no tracking info and have already submitted a missing letter claim
with Royal Mail.
I'm wondering what I should do:
1. refund the buyer and hope Royal Mail don't tell me they've already
delivered the item?;
2. wait for Royal Mail to respond which could take another few days, and my buyer
has already sent several messages as they want their items?
Any advice would be appreciated!
|
If you only have proof of posting, Royal Mail won't know if it has been delivered.
They will likely refund you anyway, so refund the buyer.
|
|
Author: | v100Bricks | Posted: | May 9, 2024 17:03 | Subject: | Re: Buyer hasn't received item, I have POP | Viewed: | 39 times | Topic: | Selling | |
| I’ve had quite a few delays recently with Royal Mail, both as a buyer and a seller,
but they have got there eventually.
I would ask the buyer to be patient for a week to 10 days before actioning the
refund.
I would raise the case with RM as soon as they allow as sometime that magically
causes the package to appear.
That said if the buyer does not agree, you are obliged to refund within a reasonable
time.but what’s is reasonable…
|
|
Author: | wildchicken13 | Posted: | May 9, 2024 17:02 | Subject: | Re: Super highway | Viewed: | 33 times | Topic: | Off Topic | |
| In Off Topic, Saitobricks.ca writes:
| Aaa… the difference it can make when your country is built around a invention
|
To be fair, before World War II, trains were the dominant form of overland travel
in America and cities tended to be small and dense, kind of like European cities.
However, this country has grown a lot since then and new development tends to
be more centered around automobiles. Much the same is true of Canada.
|
|
Author: | SezaR | Posted: | May 9, 2024 16:51 | Subject: | Re: Buyer hasn't received item, I have POP | Viewed: | 42 times | Topic: | Selling | |
| In Selling, AppleMacJack writes:
| Hopefully this is the right space to ask this:
My buyer has messaged stating they haven't received their item - I have proof
of posting but no tracking info and have already submitted a missing letter claim
with Royal Mail.
I'm wondering what I should do:
1. refund the buyer and hope Royal Mail don't tell me they've already
delivered the item?;
2. wait for Royal Mail to respond which could take another few days, and my buyer
has already sent several messages as they want their items?
Any advice would be appreciated!
|
Is it 100% your responsibility! If he does not receive it or even if he is lying,
you should refund.
I don't know about prices of Royal mail, in Canada, I can send a letter without
tracking for just $2.35 but with tracking for $14. For small orders, I don't
charge tracking but add like $0.5 to each order. If a buyer claims he did not
receive his order, I refund, i.e. those extra $0.5 I have been charging would
be covering the cost of such missing letter.
But delays happen. I had a buyer that didn't receive it. I finally re-sent
his order (two small classic space sets that I had) but after 2.5 months, he
messaged me that the first order had just arrived! Another recent case: buyer
claimed he did not receive anything. I messaged back twice and requested him
to be patient. This is what I wrote:
May 1st
Hi XXXX,
So far, among those I sent or received (about 500), no mailer has gone lost.
It is possible the mailer is accidentally sent to a different province or post
warehouse than yours. I had one package with tracking to be delivered within
my province but sent to Ontario and then they returned it back to BC. Last year,
I sent a mailer to Quebec on about 10h Jan. and was finally received on 20th
March, about 2.5 month later, when I had already resolved.
As a buyer, if i don't mind to receive the part later, I would just wait
up to 3 months (which is indeed too long), otherwise if I need the parts earlier
I would ask a refund but if later, the mailer turns up in my mailbox, I would
return it to the seller.
I think 6 weeks is expected when a delay happens and beyond that, it is an exceptional
case.
So please let me know, what you would prefer.
I guess because of my message, I felt reassured and preferred to wait and on
May 6th, he wrote me:
Hey XXX,
Guess what? I got it today!
Cheers,
So far, all my letters without tracking are delivered (about 300-500?).
I hope this helps.
|
|
Author: | AppleMacJack | Posted: | May 9, 2024 16:36 | Subject: | Buyer hasn't received item, I have POP | Viewed: | 203 times | Topic: | Selling | |
| Hopefully this is the right space to ask this:
My buyer has messaged stating they haven't received their item - I have proof
of posting but no tracking info and have already submitted a missing letter claim
with Royal Mail.
I'm wondering what I should do:
1. refund the buyer and hope Royal Mail don't tell me they've already
delivered the item?;
2. wait for Royal Mail to respond which could take another few days, and my buyer
has already sent several messages as they want their items?
Any advice would be appreciated!
|
|
Author: | brac.brick | Posted: | May 9, 2024 16:36 | Subject: | Re: Identify a torso assembly decorated part | Viewed: | 26 times | Topic: | Catalog Identification | |
| In Catalog Identification, randyf writes:
| In Catalog Identification, brac.brick writes:
| 973pb0297c01
973pb4441c01
973pb0297c01
If you have one , how to determine you have the right part? Mine has no reinforced
parts inside. It does have the inside ribs . Not sure how to tell the difference
between rounded bottom & pointed- are they significantly different?
Please help . thanks
Alison
|
The pointed bottom shield only came out on a torso assembly in 2002, so it would
have long internal ribs. If your part has short internal ribs, then it is the
rounded bottom shield version.
|
THANK YOU!!
|
|
Author: | randyf | Posted: | May 9, 2024 16:35 | Subject: | Re: Identify a torso assembly decorated part | Viewed: | 25 times | Topic: | Catalog Identification | |
| In Catalog Identification, randyf writes:
| In Catalog Identification, brac.brick writes:
| 973pb0297c01
973pb4441c01
973pb0297c01
If you have one , how to determine you have the right part? Mine has no reinforced
parts inside. It does have the inside ribs . Not sure how to tell the difference
between rounded bottom & pointed- are they significantly different?
Please help . thanks
Alison
|
The pointed bottom shield only came out on a torso assembly in 2002, so it would
have long internal ribs. If your part has short internal ribs, then it is the
rounded bottom shield version.
|
Additional image.
|
|
|
Author: | peregrinator | Posted: | May 9, 2024 16:34 | Subject: | Re: User requests buying outside of Bricklink | Viewed: | 49 times | Topic: | Selling | |
| In Selling, dstiefel writes:
| You answered sufficiently. I just wanted to make sure I understood in case a
buyer asks this of me again in the future. Thank you!
|
If a buyer on here asks you - don't do it. Nothing good will come of it!
|
|
Author: | randyf | Posted: | May 9, 2024 16:31 | Subject: | Re: Identify a torso assembly decorated part | Viewed: | 29 times | Topic: | Catalog Identification | |
| In Catalog Identification, brac.brick writes:
| 973pb0297c01
973pb4441c01
973pb0297c01
If you have one , how to determine you have the right part? Mine has no reinforced
parts inside. It does have the inside ribs . Not sure how to tell the difference
between rounded bottom & pointed- are they significantly different?
Please help . thanks
Alison
|
The pointed bottom shield only came out on a torso assembly in 2002, so it would
have long internal ribs. If your part has short internal ribs, then it is the
rounded bottom shield version.
|
|
|
Author: | SylvainLS | Posted: | May 9, 2024 16:25 | Subject: | Re: Identify a torso assembly decorated part | Viewed: | 34 times | Topic: | Catalog Identification | |
| In Catalog Identification, brac.brick writes:
|
If you have one , how to determine you have the right part? Mine has no reinforced
parts inside. It does have the inside ribs . Not sure how to tell the difference
between rounded bottom & pointed- are they significantly different?
Please help . thanks
Alison
|
|
|
Author: | brac.brick | Posted: | May 9, 2024 16:23 | Subject: | Identify a torso assembly decorated part | Viewed: | 68 times | Topic: | Catalog Identification | |
| 973pb0297c01
973pb4441c01
973pb0297c01
If you have one , how to determine you have the right part? Mine has no reinforced
parts inside. It does have the inside ribs . Not sure how to tell the difference
between rounded bottom & pointed- are they significantly different?
Please help . thanks
Alison
|
Author: | Schalkbitter | Posted: | May 9, 2024 16:19 | Subject: | 15% SALE on beautiful super heroes sets!! | Viewed: | 46 times | Topic: | Sales | |
| Next 2 days. |
|
Author: | 1001bricks | Posted: | May 9, 2024 16:09 | Subject: | Re: Continued Forum Spam | Viewed: | 35 times | Topic: | General | |
| In General, SylvainLS writes:
| In General, UTLF writes:
| […]
"It's the spaghetti code though! it's impossible to tackle!!!!"
Is that why they've done umpteen complex & pointless changes that no one
asked for while ignoring real issues? Implementing a MOC pop-up shop, a designer
program, a 2nd forum for Studio, and merging a bunch of parts for no reason?
|
To nitpick
|
As always!
| none of these touches the old spaghetti code:
— the MOC Pop-up Shop is (was/will be again?) on the v2/v3 part of the website,
— the Studio forum is totally separate code but for the shared authentication
which is on the v2/v3 side,
— ditto BDP, which is also, IIUC, how BL is making money and why TLG bought BL,
— and the merges don’t touch the code at all, which is why it’s painfully done
manually over several months rather than with a simple scripted database update
in one fell.
|
Agreed with this - and I love the recent Catalog merges.
But UTLF point may be that time, energy and money spent on those weren't
used to fix or upgrade our day to day use of the current BrickLink.
For a few years we only see as upgrades: more taxes, documents and procedures
to follow.
I don't blame BrickLink, it's everywhere - the legalized income pressure
gets higher and higher on small people, with nothing/few in compensation.
|
|
Author: | SylvainLS | Posted: | May 9, 2024 16:00 | Subject: | Re: Continued Forum Spam | Viewed: | 27 times | Topic: | General | |
| In General, UTLF writes:
| […]
"It's the spaghetti code though! it's impossible to tackle!!!!"
Is that why they've done umpteen complex & pointless changes that no one
asked for while ignoring real issues? Implementing a MOC pop-up shop, a designer
program, a 2nd forum for Studio, and merging a bunch of parts for no reason?
|
To nitpick (who said “as always”?!) on this specific part of your post, none
of these touches the old spaghetti code:
— the MOC Pop-up Shop is (was/will be again?) on the v2/v3 part of the website,
— the Studio forum is totally separate code but for the shared authentication
which is on the v2/v3 side,
— ditto BDP, which is also, IIUC, how BL is making money and why TLG bought BL,
— and the merges don’t touch the code at all, which is why it’s painfully done
manually over several months rather than with a simple scripted database update
in one fell.
|
|
Author: | dstiefel | Posted: | May 9, 2024 15:39 | Subject: | Re: User requests buying outside of Bricklink | Viewed: | 57 times | Topic: | Selling | |
| In Selling, peregrinator writes:
| In Selling, dstiefel writes:
| I was looking under terms for sellers but didn't see anything specifically
on topic, but does anyone have a definitive answer or knowledge if it goes against
Bricklink terms to sell items from store without documenting them? I know if
I wanted I could just remove the items from inventory and work out a deal separate
from Bricklink but I prefer not to do that and just curious if there are rules
against it.
|
I'm not 100% sure what you're asking but:
- you can't turn a BL order into an outside-of-BL order
- you can sell items you've listed on BL elsewhere
|
You answered sufficiently. I just wanted to make sure I understood in case a
buyer asks this of me again in the future. Thank you!
|
|
Author: | peregrinator | Posted: | May 9, 2024 15:33 | Subject: | Re: User requests buying outside of Bricklink | Viewed: | 51 times | Topic: | Selling | |
| In Selling, dstiefel writes:
| I was looking under terms for sellers but didn't see anything specifically
on topic, but does anyone have a definitive answer or knowledge if it goes against
Bricklink terms to sell items from store without documenting them? I know if
I wanted I could just remove the items from inventory and work out a deal separate
from Bricklink but I prefer not to do that and just curious if there are rules
against it.
|
I'm not 100% sure what you're asking but:
- you can't turn a BL order into an outside-of-BL order
- you can sell items you've listed on BL elsewhere
|
|
Author: | 1001bricks | Posted: | May 9, 2024 15:32 | Subject: | Re: Useful selling tip. | Viewed: | 44 times | Topic: | Selling | |
| In Selling, jennnifer writes:
| In Selling, runner.caller writes:
| As you pick an order, group all the items in small piles of 5.
When done picking, it should be super easy to count. If the final total items
picked matches the total order items, then odds are the order was picked correctly.
|
|
| I count into groups of 5 too. I also have a checked cloth on my sorting table.
I spread out 5 of whatever into each square and it's super easy to count.
|
We count by 5 - watch the parts in one hand up to having a group of 5, then pour
it.
It's easy to recognize patterns like 2+3 or 4+1 to make 5.
Starting some quantity, depending the part - like 30 or 50 - we use the counting
scale exclusively.
We never check any order count, it's worthless.
If it's a "more crucial" count, we just count or sample the scale
slower.
If sometimes (rarely) there's an error, we refund or reship the problem.
Fixing a single problem is far more (IMO) efficient than the cost of counting
twice or visually checking but ALL orders.
|
|
Author: | dstiefel | Posted: | May 9, 2024 15:29 | Subject: | User requests buying outside of Bricklink | Viewed: | 206 times | Topic: | Selling | |
| I was looking under terms for sellers but didn't see anything specifically
on topic, but does anyone have a definitive answer or knowledge if it goes against
Bricklink terms to sell items from store without documenting them? I know if
I wanted I could just remove the items from inventory and work out a deal separate
from Bricklink but I prefer not to do that and just curious if there are rules
against it.
|
Author: | sasquatch_eater | Posted: | May 9, 2024 15:25 | Subject: | Re: Continued Forum Spam | Viewed: | 30 times | Topic: | General | |
| In General, Saitobricks.ca writes:
| In General, axaday writes:
| In General, Jkbvmartinez04 writes:
| No mustard-flavored Spam? I'm very surprised...
|
Have you tried it? The mustard-flavored one isn't spam.
|
How about pizza with ham?
|
How about this?
|
|
|
Author: | SylvainLS | Posted: | May 9, 2024 15:20 | Subject: | Re: Useful selling tip. | Viewed: | 43 times | Topic: | Selling | |
| In Selling, jennnifer writes:
| […]
I count into groups of 5 too. I also have a checked cloth on my sorting table.
I spread out 5 of whatever into each square and it's super easy to count.
|
Count by 10, 5, or 2 (depends on the size & quantity).
Check by another count, like 9 or 3 (even → odd, not a multiple, so you catch
“by one” errors), or by another method.
For instance:
— method 1: 9+1 = 10, pick 9 (or 3x3), push in a corner, pick a 10th an put in
another place. Count the 10thes and the remainder (less than 10) to get the
total.
— method 2: 2x5 = 10, pick five times two or two times five, and push in a corner.
Don’t care about the total, just that the remainder is the same.
But then, I mostly only count received orders. When picking for a build, it’s
not really a problem if I’m wrong
|
|
Author: | UTLF | Posted: | May 9, 2024 14:48 | Subject: | Re: Continued Forum Spam | Viewed: | 44 times | Topic: | General | |
| I don't care about the spam itself, I'm more-so bothered by the fact
that the Admins in charge allow it in the first place; it may be an insignificant
annoyance, but for me, it shows they don't care. Action speaks louder than
words, and they're full of empty promises.
They can say they care, they can give as much lip-service as they'd like,
but it's been going on for years now and they still haven't come up with
a simple solution to forum spam. I've said it in the past, but it doesn't
really make me feel confident in the site's security when they can't
even deal with simple spam being posted daily for the past 3 or so years.
"It's the spaghetti code though! it's impossible to tackle!!!!"
Is that why they've done umpteen complex & pointless changes that no one
asked for while ignoring real issues? Implementing a MOC pop-up shop, a designer
program, a 2nd forum for Studio, and merging a bunch of parts for no reason?
It's extremely frustrating to watch, especially when some changes have been
protested for weeks before they implemented them. But "muh spaghetti code"
prevents them from implementing a requirement or filter for forum posts. Makes
sense.
I personally think the whole Bricklink team needs a restructuring or needs to
be replaced entirely. Sorry to say, but this seems to have been an issue for
way longer than I've even been on the website judging by other posts that
have been brought up over the years.
They hired more helpdesk staff back around Fall 2022, then on top of that they
had Lego step in and provide customer service reps this year, and that STILL
hasn't helped the help desk backlog, that has been "months behind"
for months now with no real info as to how bad it is, we can only go off of what
regular forum members parrot in their posts.
On top of that, the community engagement people hardly communicate with us...
the only admin that actually seems to acknowledge posts is Russell, but even
then a lot gets ignored and looked over (I know he can't reply to everything
and read everything, but there are a lot of popular forum posts that have valid
concerns that get ignored)
I love Bricklink, just hate to see it mishandled and stomped on like it has been
for the past while now.
|
|
Author: | jennnifer | Posted: | May 9, 2024 14:43 | Subject: | Re: Useful selling tip. | Viewed: | 49 times | Topic: | Selling | |
| In Selling, runner.caller writes:
| As you pick an order, group all the items in small piles of 5.
When done picking, it should be super easy to count. If the final total items
picked matches the total order items, then odds are the order was picked correctly.
It's the most useful selling tip I've encountered.
This has been shared in the forum before (which is how I first learned it), but
I thought it's worthwhile to bring it up again because I see forum complaints
often like "over half of my orders on BL are wrong missing pieces"...
etc...
This usefulness will also vary depending on the types of orders you get as a
seller.
MOST of mine are all small items and less than 100pcs so this method is pretty
easy. It works for larger orders too, just need more space/larger groups or a
mix of both.
It still saves me from a short pick here and there and since using it, my error
rate has gone down considerably.
|
I count into groups of 5 too. I also have a checked cloth on my sorting table.
I spread out 5 of whatever into each square and it's super easy to count.
~Jen
|
|
Author: | Stellar | Posted: | May 9, 2024 14:42 | Subject: | Re: Inventory Change Request for Book b11cty10 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, Stellar writes:
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Stellar writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Add 1 Set 11900-1 Parts for City - Brickmaster (Book b11cty10) polybag (Alternate)
Comments from Submitter:
Item name states origin.
|
There is already a note on the set entry concerning where it comes from because
the inventory system cannot handle this situation correctly.
Therefore, this request will not be accepted.
Cheers,
Randy
|
Aren't there many books on the catalog that only have 1 set as inventory?
|
The original production runs of this book did not contain the "set",
so the book is inventoried like all other books that did not contain a "set".
|
Then should not the “set” be removed from the catalog? After all it is technically
just a bag being used as a containment device for the parts.
|
In that case I suppose it would be best to add the inventory of parts to the
book and add the set as an alternate to all the parts. But I don't know if
the system is capable of that.
|
Go back up and read my original reply.
|
|
|
Author: | Saitobricks.ca | Posted: | May 9, 2024 14:37 | Subject: | Re: Continued Forum Spam | Viewed: | 25 times | Topic: | General | |
| In General, 1001bricks writes:
| In General, Saitobricks.ca writes:
| In General, 1001bricks writes:
| In General, axaday writes:
| In General, popsicle writes:
I just ignore it and it doesn't hurt me at all.
|
Same!
Gummies, Pizzas, Mustard, various GPTusers, mods with far too much time and knowledge
(and no Selling Feedback, imagine!), silly contests, Inventory Requests - there
are many different forms of SPAM - depending the POV maybe
|
Says the one who spammed the forum with over 6,500 messages
|
Profession: spreader.
|
Confession: spammer.
|
|
Author: | randyf | Posted: | May 9, 2024 14:33 | Subject: | Re: Inventory Change Request for Book b11cty10 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Stellar writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Add 1 Set 11900-1 Parts for City - Brickmaster (Book b11cty10) polybag (Alternate)
Comments from Submitter:
Item name states origin.
|
There is already a note on the set entry concerning where it comes from because
the inventory system cannot handle this situation correctly.
Therefore, this request will not be accepted.
Cheers,
Randy
|
Aren't there many books on the catalog that only have 1 set as inventory?
|
The original production runs of this book did not contain the "set",
so the book is inventoried like all other books that did not contain a "set".
|
Then should not the “set” be removed from the catalog? After all it is technically
just a bag being used as a containment device for the parts.
|
The set entry should have a set number on the polybag somewhere, whereas the
original books just had the parts in a plain clear bag like other books.
|
As you can see from the picture, the bag is just the standard packaging bag with
NO set markings.
|
Sorry, it's the only image we have right now.
|
Sooo, are you saying we got a picture of some other random bag?
|
No, I'm saying if you have an image of the set better showing the item number
on the polybag, we could replace the current image with the better one.
|
|
Author: | 1001bricks | Posted: | May 9, 2024 14:25 | Subject: | Re: Continued Forum Spam | Viewed: | 28 times | Topic: | General | |
| In General, Saitobricks.ca writes:
| In General, 1001bricks writes:
| In General, axaday writes:
| In General, popsicle writes:
I just ignore it and it doesn't hurt me at all.
|
Same!
Gummies, Pizzas, Mustard, various GPTusers, mods with far too much time and knowledge
(and no Selling Feedback, imagine!), silly contests, Inventory Requests - there
are many different forms of SPAM - depending the POV maybe
|
Says the one who spammed the forum with over 6,500 messages
|
Profession: spreader.
|
|
Author: | Saitobricks.ca | Posted: | May 9, 2024 14:19 | Subject: | Re: Inventory Change Request for Book b11cty10 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Stellar writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Add 1 Set 11900-1 Parts for City - Brickmaster (Book b11cty10) polybag (Alternate)
Comments from Submitter:
Item name states origin.
|
There is already a note on the set entry concerning where it comes from because
the inventory system cannot handle this situation correctly.
Therefore, this request will not be accepted.
Cheers,
Randy
|
Aren't there many books on the catalog that only have 1 set as inventory?
|
The original production runs of this book did not contain the "set",
so the book is inventoried like all other books that did not contain a "set".
|
Then should not the “set” be removed from the catalog? After all it is technically
just a bag being used as a containment device for the parts.
|
The set entry should have a set number on the polybag somewhere, whereas the
original books just had the parts in a plain clear bag like other books.
|
As you can see from the picture, the bag is just the standard packaging bag with
NO set markings.
|
Sorry, it's the only image we have right now.
|
Sooo, are you saying we got a picture of some other random bag?
|
|
Author: | randyf | Posted: | May 9, 2024 14:14 | Subject: | Re: Inventory Change Request for Book b11cty10 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Stellar writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Add 1 Set 11900-1 Parts for City - Brickmaster (Book b11cty10) polybag (Alternate)
Comments from Submitter:
Item name states origin.
|
There is already a note on the set entry concerning where it comes from because
the inventory system cannot handle this situation correctly.
Therefore, this request will not be accepted.
Cheers,
Randy
|
Aren't there many books on the catalog that only have 1 set as inventory?
|
The original production runs of this book did not contain the "set",
so the book is inventoried like all other books that did not contain a "set".
|
Then should not the “set” be removed from the catalog? After all it is technically
just a bag being used as a containment device for the parts.
|
The set entry should have a set number on the polybag somewhere, whereas the
original books just had the parts in a plain clear bag like other books.
|
As you can see from the picture, the bag is just the standard packaging bag with
NO set markings.
|
Sorry, it's the only image we have right now.
|
|
Author: | Saitobricks.ca | Posted: | May 9, 2024 14:13 | Subject: | Re: Continued Forum Spam | Viewed: | 34 times | Topic: | General | |
| In General, axaday writes:
| In General, Jkbvmartinez04 writes:
| No mustard-flavored Spam? I'm very surprised...
|
Have you tried it? The mustard-flavored one isn't spam.
|
How about pizza with ham?
|
|
Author: | Saitobricks.ca | Posted: | May 9, 2024 14:12 | Subject: | Re: Inventory Change Request for Book b11cty10 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Stellar writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Add 1 Set 11900-1 Parts for City - Brickmaster (Book b11cty10) polybag (Alternate)
Comments from Submitter:
Item name states origin.
|
There is already a note on the set entry concerning where it comes from because
the inventory system cannot handle this situation correctly.
Therefore, this request will not be accepted.
Cheers,
Randy
|
Aren't there many books on the catalog that only have 1 set as inventory?
|
The original production runs of this book did not contain the "set",
so the book is inventoried like all other books that did not contain a "set".
|
Then should not the “set” be removed from the catalog? After all it is technically
just a bag being used as a containment device for the parts.
|
The set entry should have a set number on the polybag somewhere, whereas the
original books just had the parts in a plain clear bag like other books.
|
As you can see from the picture, the bag is just the standard packaging bag with
NO set markings.
|
|
Author: | randyf | Posted: | May 9, 2024 14:11 | Subject: | Re: Inventory Change Request for Book b11cty10 | Viewed: | 17 times | Topic: | Inventories Requests | |
| In Inventories Requests, Stellar writes:
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Stellar writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Add 1 Set 11900-1 Parts for City - Brickmaster (Book b11cty10) polybag (Alternate)
Comments from Submitter:
Item name states origin.
|
There is already a note on the set entry concerning where it comes from because
the inventory system cannot handle this situation correctly.
Therefore, this request will not be accepted.
Cheers,
Randy
|
Aren't there many books on the catalog that only have 1 set as inventory?
|
The original production runs of this book did not contain the "set",
so the book is inventoried like all other books that did not contain a "set".
|
Then should not the “set” be removed from the catalog? After all it is technically
just a bag being used as a containment device for the parts.
|
In that case I suppose it would be best to add the inventory of parts to the
book and add the set as an alternate to all the parts. But I don't know if
the system is capable of that.
|
Go back up and read my original reply.
|
|
Author: | axaday | Posted: | May 9, 2024 14:10 | Subject: | Re: Continued Forum Spam | Viewed: | 26 times | Topic: | General | |
| In General, Jkbvmartinez04 writes:
| No mustard-flavored Spam? I'm very surprised...
|
Have you tried it? The mustard-flavored one isn't spam.
|
|
Author: | popsicle | Posted: | May 9, 2024 14:10 | Subject: | Re: Continued Forum Spam | Viewed: | 69 times | Topic: | General | |
| In General, axaday writes:
| In General, popsicle writes:
I just ignore it and it doesn't hurt me at all.
|
I understand. From the posted suggestion "Personally don't find the
spam posts all that bothersome. Many do though, and if there's an easy fix
to tidy things up a bit..."
But whether you, I or some others are overly bothered, is not the point of the
suggestion. Betterment of the site, if for no other reason
Anyway, it's just a suggestion of how something that does bother others,
could be handled. A few analogies leap to mind, things that should not be allowed
as being disruptive or subversive to the accustomed functioning of a given community.
In other words, things which though don't particularly bother you or I, might
be addressed nonetheless
But like I said, just a suggestion
|
|
Author: | Saitobricks.ca | Posted: | May 9, 2024 14:10 | Subject: | Re: Inventory Change Request for Book b11cty10 | Viewed: | 15 times | Topic: | Inventories Requests | |
| In Inventories Requests, Stellar writes:
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Stellar writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Add 1 Set 11900-1 Parts for City - Brickmaster (Book b11cty10) polybag (Alternate)
Comments from Submitter:
Item name states origin.
|
There is already a note on the set entry concerning where it comes from because
the inventory system cannot handle this situation correctly.
Therefore, this request will not be accepted.
Cheers,
Randy
|
Aren't there many books on the catalog that only have 1 set as inventory?
|
The original production runs of this book did not contain the "set",
so the book is inventoried like all other books that did not contain a "set".
|
Then should not the “set” be removed from the catalog? After all it is technically
just a bag being used as a containment device for the parts.
|
In that case I suppose it would be best to add the inventory of parts to the
book and add the set as an alternate to all the parts. But I don't know if
the system is capable of that.
|
That’s what I did, but alas, it was not possible.😔
|
|
Author: | randyf | Posted: | May 9, 2024 14:10 | Subject: | Re: Inventory Change Request for Book b11cty10 | Viewed: | 16 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Stellar writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Add 1 Set 11900-1 Parts for City - Brickmaster (Book b11cty10) polybag (Alternate)
Comments from Submitter:
Item name states origin.
|
There is already a note on the set entry concerning where it comes from because
the inventory system cannot handle this situation correctly.
Therefore, this request will not be accepted.
Cheers,
Randy
|
Aren't there many books on the catalog that only have 1 set as inventory?
|
The original production runs of this book did not contain the "set",
so the book is inventoried like all other books that did not contain a "set".
|
Then should not the “set” be removed from the catalog? After all it is technically
just a bag being used as a containment device for the parts.
|
The set entry should have a set number on the polybag somewhere, whereas the
original books just had the parts in a plain clear bag like other books.
|
|
Author: | Stellar | Posted: | May 9, 2024 14:07 | Subject: | Re: Inventory Change Request for Book b11cty10 | Viewed: | 21 times | Topic: | Inventories Requests | |
| In Inventories Requests, Saitobricks.ca writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Stellar writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Add 1 Set 11900-1 Parts for City - Brickmaster (Book b11cty10) polybag (Alternate)
Comments from Submitter:
Item name states origin.
|
There is already a note on the set entry concerning where it comes from because
the inventory system cannot handle this situation correctly.
Therefore, this request will not be accepted.
Cheers,
Randy
|
Aren't there many books on the catalog that only have 1 set as inventory?
|
The original production runs of this book did not contain the "set",
so the book is inventoried like all other books that did not contain a "set".
|
Then should not the “set” be removed from the catalog? After all it is technically
just a bag being used as a containment device for the parts.
|
In that case I suppose it would be best to add the inventory of parts to the
book and add the set as an alternate to all the parts. But I don't know if
the system is capable of that.
|
|
Author: | Saitobricks.ca | Posted: | May 9, 2024 14:07 | Subject: | Re: Continued Forum Spam | Viewed: | 29 times | Topic: | General | |
| In General, 1001bricks writes:
| In General, axaday writes:
| In General, popsicle writes:
I just ignore it and it doesn't hurt me at all.
|
Same!
Gummies, Pizzas, Mustard, various GPTusers, mods with far too much time and knowledge
(and no Selling Feedback, imagine!), silly contests, Inventory Requests - there
are many different forms of SPAM - depending the POV maybe
|
Says the one who spammed the forum with over 6,500 messages
|
|
Author: | Saitobricks.ca | Posted: | May 9, 2024 13:59 | Subject: | Re: Inventory Change Request for Book b11cty10 | Viewed: | 22 times | Topic: | Inventories Requests | |
| In Inventories Requests, randyf writes:
| In Inventories Requests, Stellar writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Add 1 Set 11900-1 Parts for City - Brickmaster (Book b11cty10) polybag (Alternate)
Comments from Submitter:
Item name states origin.
|
There is already a note on the set entry concerning where it comes from because
the inventory system cannot handle this situation correctly.
Therefore, this request will not be accepted.
Cheers,
Randy
|
Aren't there many books on the catalog that only have 1 set as inventory?
|
The original production runs of this book did not contain the "set",
so the book is inventoried like all other books that did not contain a "set".
|
Then should not the “set” be removed from the catalog? After all it is technically
just a bag being used as a containment device for the parts.
|
|
Author: | sasquatch_eater | Posted: | May 9, 2024 13:48 | Subject: | Re: Continued Forum Spam | Viewed: | 36 times | Topic: | General | |
| In General, 1001bricks writes:
| In General, axaday writes:
| In General, popsicle writes:
I just ignore it and it doesn't hurt me at all.
|
Same!
Gummies, Pizzas, Mustard, various GPTusers, mods with far too much time and knowledge
(and no Selling Feedback, imagine!), silly contests, Inventory Requests - there
are many different forms of SPAM - depending the POV maybe
|
|
|
Author: | Jkbvmartinez04 | Posted: | May 9, 2024 13:48 | Subject: | Re: Continued Forum Spam | Viewed: | 31 times | Topic: | General | |
| No mustard-flavored Spam? I'm very surprised... |
Author: | Tracyd | Posted: | May 9, 2024 13:41 | Subject: | Re: Continued Forum Spam | Viewed: | 30 times | Topic: | General | |
| In General, Dhobeck writes:
| In General, 1001bricks writes:
| In General, axaday writes:
| In General, popsicle writes:
I just ignore it and it doesn't hurt me at all.
|
Same!
Gummies, Pizzas, Mustard, various GPTusers, mods with far too much time and knowledge
(and no Selling Feedback, imagine!), silly contests, Inventory Requests - there
are many different forms of SPAM - depending the POV maybe
|
Many different types of spam indeed
|
https://youtu.be/cFrtpT1mKy8
|
|
Author: | Dhobeck | Posted: | May 9, 2024 13:27 | Subject: | Re: Continued Forum Spam | Viewed: | 41 times | Topic: | General | |
| In General, 1001bricks writes:
| In General, axaday writes:
| In General, popsicle writes:
I just ignore it and it doesn't hurt me at all.
|
Same!
Gummies, Pizzas, Mustard, various GPTusers, mods with far too much time and knowledge
(and no Selling Feedback, imagine!), silly contests, Inventory Requests - there
are many different forms of SPAM - depending the POV maybe
|
Many different types of spam indeed
|
|
|
Author: | 1001bricks | Posted: | May 9, 2024 13:23 | Subject: | Re: Continued Forum Spam | Viewed: | 38 times | Topic: | General | |
| In General, axaday writes:
| In General, popsicle writes:
I just ignore it and it doesn't hurt me at all.
|
Same!
Gummies, Pizzas, Mustard, various GPTusers, mods with far too much time and knowledge
(and no Selling Feedback, imagine!), silly contests, Inventory Requests - there
are many different forms of SPAM - depending the POV maybe
|
|
Author: | randyf | Posted: | May 9, 2024 13:20 | Subject: | Re: Inventory Change Request for Book b11cty10 | Viewed: | 27 times | Topic: | Inventories Requests | |
| In Inventories Requests, Stellar writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, Saitobricks.ca writes:
| Please make changes to the following inventory:
* Add 1 Set 11900-1 Parts for City - Brickmaster (Book b11cty10) polybag (Alternate)
Comments from Submitter:
Item name states origin.
|
There is already a note on the set entry concerning where it comes from because
the inventory system cannot handle this situation correctly.
Therefore, this request will not be accepted.
Cheers,
Randy
|
Aren't there many books on the catalog that only have 1 set as inventory?
|
The original production runs of this book did not contain the "set",
so the book is inventoried like all other books that did not contain a "set".
|
|
Author: | axaday | Posted: | May 9, 2024 13:19 | Subject: | Re: Continued Forum Spam | Viewed: | 43 times | Topic: | General | |
| In General, popsicle writes:
I just ignore it and it doesn't hurt me at all.
|
|
Author: | t_wmilwaukee | Posted: | May 9, 2024 13:08 | Subject: | Re: Cannot sell but have positive feedback | Viewed: | 71 times | Topic: | Technical Issues | |
| In Technical Issues, 1001bricks writes:
| In Technical Issues, t_wmilwaukee writes:
| Stuck at the "You currently do not have enough positive feedback to upgrade
to a seller." page.
Granted I only have one positive, but that should meet the terms?
|
I guess:
https://www.bricklink.com/help.asp?helpID=2440&q=seller
BrickLink is a community-driven marketplace. To join the seller community
of BrickLink, you must have at least one net positive feedback from a valid
seller.
As this seller isn't registered anymore, it's not "valid".
Very sorry.
|
DOH. Ok, well that sucks for me then lol. Wasn't super clear and I would
have never have known to have checked that.
|
|
Author: | 1001bricks | Posted: | May 9, 2024 13:06 | Subject: | Re: Cannot sell but have positive feedback | Viewed: | 58 times | Topic: | Technical Issues | |
| In Technical Issues, t_wmilwaukee writes:
| Stuck at the "You currently do not have enough positive feedback to upgrade
to a seller." page.
Granted I only have one positive, but that should meet the terms?
|
I guess:
https://www.bricklink.com/help.asp?helpID=2440&q=seller
BrickLink is a community-driven marketplace. To join the seller community
of BrickLink, you must have at least one net positive feedback from a valid
seller.
As this seller isn't registered anymore, it's not "valid".
Very sorry.
|
|
Author: | t_wmilwaukee | Posted: | May 9, 2024 13:02 | Subject: | Cannot sell but have positive feedback | Viewed: | 175 times | Topic: | Technical Issues | |
| Stuck at the "You currently do not have enough positive feedback to upgrade
to a seller." page.
Granted I only have one positive, but that should meet the terms?
I'll place a few more orders to bump the number, maybe there's a time
limit?
|
|
|
Author: | Nubs_Select | Posted: | May 9, 2024 12:26 | Subject: | Re: Continued Forum Spam | Viewed: | 42 times | Topic: | General | |
| In General, 1001bricks writes:
| In General, Nicolasamico37 writes:
| In General, popsicle writes:
| In General, Nicolasamico37 writes:
| In General, popsicle writes:
I am on the forum all day and report at least 4 or 5 spam members per day.
I would be very appreciated. But the last spam doesn't have any link in its
post...
|
You'd don't think that was intentional misdirection, Nicolas?
It's the first I've seen without links, anyway
|
You're right, the first without link ! Are bots enough smart ? I don't
think so... It won't last !
|
Yes, they're progressing. We've seen improvements in NubsGPT!
|
Mwhahahaha
|
|
Author: | Biglesdug | Posted: | May 9, 2024 12:26 | Subject: | Re: 2013 SDCC spiderman mini fig | Viewed: | 54 times | Topic: | Price Guide | |
| Decool is a knockoff brand, they copy LEGO sets and design.
Real one would have the LEGO logo on the neck stud and hips. A fake can also
be printed on real LEGO parts, but then someone custom prints on it.
|
|
Author: | Nicolasamico37 | Posted: | May 9, 2024 12:25 | Subject: | Re: 2013 SDCC spiderman mini fig | Viewed: | 43 times | Topic: | Price Guide | |
| In Price Guide, jumashark writes:
| In Price Guide, Nicolasamico37 writes:
| In Price Guide, jumashark writes:
| This is a loose mini fig and it has been played with but my son brought it to
me and said he heard it was worth something. I have looked it up and I know a
brand new one is worth 15-20k in the box this one is loose and I have no way
of knowing for sure but everything I have looked at says this one is one of the
350 given away at SDCC in 2013. the two things that I have seen that give it
away are the dotted coloring in the eyes and blue on the chest and the legs being
red with blue painted to points on the knees. Is there any other defining way
to tell? Also what does a loose fig of one of these go for?
|
I found a picture from Flicker, a comparison between Decool and LEGO® and I can
assure you, this one is a Decool copy ! Sorry
Nicolas
|
That is why I ask what is is a Decool and what would the real one have on it
mainly so I can explain to my kid he got super excited before he left for school.
|
Sorry, I can't put a link here but the picture is from Robuko on Flickr.
I can't copy the picture here even if I would, rights reserved...
Search for comparison Decool LEGO SDCC, you will find it
Hope you understand !
Nicolas
|
|
Author: | 1001bricks | Posted: | May 9, 2024 12:19 | Subject: | Re: Continued Forum Spam | Viewed: | 33 times | Topic: | General | |
| In General, Nicolasamico37 writes:
| In General, popsicle writes:
| In General, Nicolasamico37 writes:
| In General, popsicle writes:
I am on the forum all day and report at least 4 or 5 spam members per day.
I would be very appreciated. But the last spam doesn't have any link in its
post...
|
You'd don't think that was intentional misdirection, Nicolas?
It's the first I've seen without links, anyway
|
You're right, the first without link ! Are bots enough smart ? I don't
think so... It won't last !
|
Yes, they're progressing. We've seen improvements in NubsGPT!
|
|
Author: | popsicle | Posted: | May 9, 2024 12:13 | Subject: | Re: Continued Forum Spam | Viewed: | 38 times | Topic: | General | |
| In General, Nicolasamico37 writes:
| In General, popsicle writes:
| In General, Nicolasamico37 writes:
| In General, popsicle writes:
I am on the forum all day and report at least 4 or 5 spam members per day.
I would be very appreciated. But the last spam doesn't have any link in its
post...
|
You'd don't think that was intentional misdirection, Nicolas?
It's the first I've seen without links, anyway
|
You're right, the first without link ! Are bots enough smart ?
|
You're assuming bots in this seemingly fortuitous and timely instance
| I don't think so... It won't last !
|
|
|
Author: | jumashark | Posted: | May 9, 2024 12:10 | Subject: | Re: 2013 SDCC spiderman mini fig | Viewed: | 49 times | Topic: | Price Guide | |
| In Price Guide, Nicolasamico37 writes:
| In Price Guide, jumashark writes:
| This is a loose mini fig and it has been played with but my son brought it to
me and said he heard it was worth something. I have looked it up and I know a
brand new one is worth 15-20k in the box this one is loose and I have no way
of knowing for sure but everything I have looked at says this one is one of the
350 given away at SDCC in 2013. the two things that I have seen that give it
away are the dotted coloring in the eyes and blue on the chest and the legs being
red with blue painted to points on the knees. Is there any other defining way
to tell? Also what does a loose fig of one of these go for?
|
I found a picture from Flicker, a comparison between Decool and LEGO® and I can
assure you, this one is a Decool copy ! Sorry
Nicolas
|
That is why I ask what is is a Decool and what would the real one have on it
mainly so I can explain to my kid he got super excited before he left for school.
|
|
Author: | jumashark | Posted: | May 9, 2024 12:08 | Subject: | Re: 2013 SDCC spiderman mini fig | Viewed: | 45 times | Topic: | Price Guide | |
| In Price Guide, Nicolasamico37 writes:
| In Price Guide, jumashark writes:
| This is a loose mini fig and it has been played with but my son brought it to
me and said he heard it was worth something. I have looked it up and I know a
brand new one is worth 15-20k in the box this one is loose and I have no way
of knowing for sure but everything I have looked at says this one is one of the
350 given away at SDCC in 2013. the two things that I have seen that give it
away are the dotted coloring in the eyes and blue on the chest and the legs being
red with blue painted to points on the knees. Is there any other defining way
to tell? Also what does a loose fig of one of these go for?
|
I found a picture from Flicker, a comparison between Decool and LEGO® and I can
assure you, this one is a Decool copy ! Sorry
Nicolas
|
|
|
Author: | Nicolasamico37 | Posted: | May 9, 2024 11:58 | Subject: | Re: 2013 SDCC spiderman mini fig | Viewed: | 45 times | Topic: | Price Guide | |
| In Price Guide, jumashark writes:
| This is a loose mini fig and it has been played with but my son brought it to
me and said he heard it was worth something. I have looked it up and I know a
brand new one is worth 15-20k in the box this one is loose and I have no way
of knowing for sure but everything I have looked at says this one is one of the
350 given away at SDCC in 2013. the two things that I have seen that give it
away are the dotted coloring in the eyes and blue on the chest and the legs being
red with blue painted to points on the knees. Is there any other defining way
to tell? Also what does a loose fig of one of these go for?
|
I found a picture from Flicker, a comparison between Decool and LEGO® and I can
assure you, this one is a Decool copy ! Sorry
Nicolas
|
|
Author: | Nicolasamico37 | Posted: | May 9, 2024 11:52 | Subject: | Re: Continued Forum Spam | Viewed: | 36 times | Topic: | General | |
| In General, popsicle writes:
| In General, Nicolasamico37 writes:
| In General, popsicle writes:
I am on the forum all day and report at least 4 or 5 spam members per day.
I would be very appreciated. But the last spam doesn't have any link in its
post...
|
You'd don't think that was intentional misdirection, Nicolas?
It's the first I've seen without links, anyway
|
You're right, the first without link ! Are bots enough smart ? I don't
think so... It won't last !
|
|
Author: | Adjour | Posted: | May 9, 2024 11:50 | Subject: | Re: 2013 SDCC spiderman mini fig | Viewed: | 44 times | Topic: | Price Guide | |
| In Price Guide, jumashark writes:
| This is a loose mini fig and it has been played with but my son brought it to
me and said he heard it was worth something. I have looked it up and I know a
brand new one is worth 15-20k in the box this one is loose and I have no way
of knowing for sure but everything I have looked at says this one is one of the
350 given away at SDCC in 2013. the two things that I have seen that give it
away are the dotted coloring in the eyes and blue on the chest and the legs being
red with blue painted to points on the knees. Is there any other defining way
to tell? Also what does a loose fig of one of these go for?
|
Before we get excited, is there a lego logo on the torso and legs?
Sadly Marvel figs are faked ALOT. It's not worth getting excited yet unless
you guys actually got it at CC in person.
Crystal
|
|
Author: | WOLKsite | Posted: | May 9, 2024 11:34 | Subject: | Re: Inventory Change Request for Set 75387-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
| In Inventories Requests, RickLenssen writes:
| Please make changes to the following inventory:
* Add 1 Part 2540 Dark Bluish Gray Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
* Add 1 Part 42446 Dark Bluish Gray Minifigure Neck Bracket with Back Stud - Thin Back Wall
|
These are part of one of the figures, and thus are already part of the set inventory.
|
|
Author: | jumashark | Posted: | May 9, 2024 11:33 | Subject: | 2013 SDCC spiderman mini fig | Viewed: | 117 times | Topic: | Price Guide | |
| This is a loose mini fig and it has been played with but my son brought it to
me and said he heard it was worth something. I have looked it up and I know a
brand new one is worth 15-20k in the box this one is loose and I have no way
of knowing for sure but everything I have looked at says this one is one of the
350 given away at SDCC in 2013. the two things that I have seen that give it
away are the dotted coloring in the eyes and blue on the chest and the legs being
red with blue painted to points on the knees. Is there any other defining way
to tell? Also what does a loose fig of one of these go for?
|
|
|
Author: | cszM | Posted: | May 9, 2024 11:25 | Subject: | Re: Missing pieces on a set | Viewed: | 37 times | Topic: | Help | |
| In Help, yorbrick writes:
| In Help, cszM writes:
| Hello,
I bought 2 sets from a store and one of them was incomplete (it was supossed
to be complete). I've written the seller with a list of the missing pieces,
my email was read but I have no answer, it's been more than two weeks since
I send the email.
What should I do?
|
Which set was it, and which parts were missing? As not all sets have to have
all the parts in the inventory to be considered complete when used.
|
Set was 75153 AT-ST Walker, it was supposed to be complete with no box. I'm
missing pieces for the feet wich make the model unable to stand up, tiles to
conceil studs, pieces with stickers, the projectiles for the weapons... I don't
think that's ok to sell it as a "complete" set.
And the seller accepted this and offered me a refund when I filled a NSS. Then
BRICKLINK closed the NSS and the seller just ignores my messages.
|
|
Author: | rab1234 | Posted: | May 9, 2024 11:24 | Subject: | Re: 3144 broken prong repair | Viewed: | 43 times | Topic: | Help | |
| It costs about $25 with shipping for a used one (that hopefully isn't also
damaged). Glue costs about $2 or they may already have it.
In Help, goldknight writes:
| In Help, mburke81 writes:
| Hey folks,
I have a 3144 with a partially broken prong. I attempted to fix it with MEK,
but apparently this part isn’t made with the same materials as regular pieces.
Someone then told me that it might be PVC, but I tried that glue and it also
did nothing. Does anyone have any idea what glue or chemical that I can use on
this part to make the repair?
Photo enclosed.
Thanks!
|
Just buy a new one
|
|
|
Author: | Adjour | Posted: | May 9, 2024 11:01 | Subject: | Re: First Account Deleted?? | Viewed: | 40 times | Topic: | Technical Issues | |
| In Technical Issues, Irishlooper writes:
| Has anyone had issues with their account seemingly being deleted? I had an account
and started populating my sets and tracking the missing parts as I go to see
what I need to order. However, when I tried to log in this week I was getting
ID issues and couldn't do forgot password as there was no account associated.
So I created a new account same username and email, now just concerned that I
don't want to waste my time putting the time in if there is chance it could
disappear again? Anyone with this experience?
|
This happened to my SO recently. He was checking set inventories, didn't
use it for like a month and then the account was gone when he tried to use it
again.
He went through the process of making a new account and midway it told him something
along the lines of "you already have an account" and then was magically
able to sign in after.
I think there's a glitch somewhere.
Crystal
|
|
Author: | RickLenssen | Posted: | May 9, 2024 11:00 | Subject: | Inventory Change Request for Set 75387-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 2540 Dark Bluish Gray Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends
* Add 1 Part 42446 Dark Bluish Gray Minifigure Neck Bracket with Back Stud - Thin Back Wall
|
Author: | popsicle | Posted: | May 9, 2024 10:36 | Subject: | Re: Continued Forum Spam | Viewed: | 38 times | Topic: | General | |
| In General, Stellar writes:
| In General, Nicolasamico37 writes:
| In General, popsicle writes:
I am on the forum all day and report at least 4 or 5 spam members per day.
I would be very appreciated. But the last spam doesn't have any link in its
post...
Nicolas
|
It was auto hidden by the website because the spammer put it in HTML tags.
|
Thanks. Good to learn
|
|
Author: | Stellar | Posted: | May 9, 2024 10:32 | Subject: | Re: Continued Forum Spam | Viewed: | 34 times | Topic: | General | |
| In General, Nicolasamico37 writes:
| In General, popsicle writes:
I am on the forum all day and report at least 4 or 5 spam members per day.
I would be very appreciated. But the last spam doesn't have any link in its
post...
Nicolas
|
It was auto hidden by the website because the spammer put it in HTML tags.
|
|
Author: | popsicle | Posted: | May 9, 2024 10:27 | Subject: | Re: Continued Forum Spam | Viewed: | 44 times | Topic: | General | |
| In General, Nicolasamico37 writes:
| In General, popsicle writes:
I am on the forum all day and report at least 4 or 5 spam members per day.
I would be very appreciated. But the last spam doesn't have any link in its
post...
|
You'd don't think that was intentional misdirection, Nicolas?
It's the first I've seen without links, anyway
|
Author: | Dhobeck | Posted: | May 9, 2024 10:22 | Subject: | Re: shipping charge | Viewed: | 32 times | Topic: | Help | |
| In Help, PieceOfMind writes:
| My Instant checkout charge is $4.00 plus $1 additional fee. I received an order,
weighing just 1 lb 1.7 ounces, the shipping charge was $12.99, the $1 was omitted.
Who can check on this for me?
|
Seems it was omitted for 1 lb 1.76 oz
|
|
Author: | Tracyd | Posted: | May 9, 2024 09:57 | Subject: | Re: Continued Forum Spam | Viewed: | 41 times | Topic: | General | |
| In General, popsicle writes:
How about any new member wishing to post on the forums has to wash an existing
members car before they can post to prove their sincerity?
|
Author: | peregrinator | Posted: | May 9, 2024 09:54 | Subject: | Re: shipping charge | Viewed: | 38 times | Topic: | Help | |
| In Help, PieceOfMind writes:
| My Instant checkout charge is $4.00 plus $1 additional fee. I received an order,
weighing just 1 lb 1.7 ounces, the shipping charge was $12.99, the $1 was omitted.
Who can check on this for me?
|
I added a large set to my cart from your store and S&H was $15.99.
|
|
Author: | Nicolasamico37 | Posted: | May 9, 2024 09:48 | Subject: | Re: Continued Forum Spam | Viewed: | 51 times | Topic: | General | |
| In General, popsicle writes:
I am on the forum all day and report at least 4 or 5 spam members per day.
I would be very appreciated. But the last spam doesn't have any link in its
post...
Nicolas
|
|
Author: | runner.caller | Posted: | May 9, 2024 09:47 | Subject: | Useful selling tip. | Viewed: | 175 times | Topic: | Selling | |
| As you pick an order, group all the items in small piles of 5.
When done picking, it should be super easy to count. If the final total items
picked matches the total order items, then odds are the order was picked correctly.
It's the most useful selling tip I've encountered.
This has been shared in the forum before (which is how I first learned it), but
I thought it's worthwhile to bring it up again because I see forum complaints
often like "over half of my orders on BL are wrong missing pieces"...
etc...
This usefulness will also vary depending on the types of orders you get as a
seller.
MOST of mine are all small items and less than 100pcs so this method is pretty
easy. It works for larger orders too, just need more space/larger groups or a
mix of both.
It still saves me from a short pick here and there and since using it, my error
rate has gone down considerably.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|