Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | yorbrick | Posted: | May 31, 2016 14:59 | Subject: | Re: Letter for Bricklink Administration | Viewed: | 80 times | Topic: | Suggestions | |
|
| In Suggestions, basarozcan writes:
| In Suggestions, Heartbricker writes:
| In Suggestions, RobErNat writes:
| In Suggestions, basarozcan writes:
For your information: you don't need a Paypal account to pay to a
Paypal account, you can open the payment tab and select 'other method'
and pay straight from credit card (Visa, Mastercard, American Express, etc),
so I don't think there would be any reason why Bricklink would not bill you
or agree to accept a longer delay on payment.
Obviously, it does mean you should have a credit card allowed by Paypal...
|
It sounds like they won't be able to use paypal at all, with or without an
account.
|
Yes, our credit cards and debit cards also can not be used by PayPal after 6th
of June.
|
Shouldn't you be removing PayPal from your terms now. You could get an order,
have it not paid for six days, then you'd be breaking your store terms if
you don't accept payment through PayPal.
|
|
Author: | Heartbricker | Posted: | May 31, 2016 14:57 | Subject: | Re: Letter for Bricklink Administration | Viewed: | 89 times | Topic: | Suggestions | |
|
| In Suggestions, basarozcan writes:
| Dear Staff,
I'm one of the executive member of enclosed Turkish LEGO Users Group (Turklug)
and one of the founder of Istanbul LEGO Users Group (IstanLUG). Last 7 years
me and my friends organized Turkish LEGO Fans to be a RLUG, arranging so many
meetings, contests and community projects in our country.
We're sellers and buyers from Turkey whom deals with government's bad
decisions nowadays. After 6th of June, PayPal is retreat from our country because
of governments some regulations. Not only for bricklink we're blocked to
buy stuff and sell our works for using PayPal. PayPal authorities said that they
are working on this situation to solve immediately but nobody know when they
will solve it.
As you know Bricklink request fees only on PayPal account. We're unable to
pay our bricklink fees anymore. Please add different payment method for paying
our fees to bricklink. If it is not possible we'll want limitless postponement
to paying our fees to bricklink.
Kindly regards
|
I voted yes even though it doesn't really relate to me, just showing a sign
of solidarity.
I visited Turkey back in the 90's and got to meet a lot of Turkish Air Force
pilots when i was in the air force.
It's a Wonderful country and even more wonderful and welcoming peaceful people
(and the food was fantastic!) it's a shame that many of your citizens are
forced into oppressive predicaments by your current government.
Best wishes, Good Luck and above all: Peace.
|
|
Author: | basarozcan | Posted: | May 31, 2016 14:52 | Subject: | Re: Letter for Bricklink Administration | Viewed: | 110 times | Topic: | Suggestions | |
|
| In Suggestions, Heartbricker writes:
| In Suggestions, RobErNat writes:
| In Suggestions, basarozcan writes:
For your information: you don't need a Paypal account to pay to a
Paypal account, you can open the payment tab and select 'other method'
and pay straight from credit card (Visa, Mastercard, American Express, etc),
so I don't think there would be any reason why Bricklink would not bill you
or agree to accept a longer delay on payment.
Obviously, it does mean you should have a credit card allowed by Paypal...
|
It sounds like they won't be able to use paypal at all, with or without an
account.
|
Yes, our credit cards and debit cards also can not be used by PayPal after 6th
of June.
|
|
Author: | Palindrome53 | Posted: | May 31, 2016 14:52 | Subject: | Re: Letter for Bricklink Administration | Viewed: | 79 times | Topic: | Suggestions | |
|
| In Suggestions, Heartbricker writes:
| In Suggestions, RobErNat writes:
| In Suggestions, basarozcan writes:
For your information: you don't need a Paypal account to pay to a
Paypal account, you can open the payment tab and select 'other method'
and pay straight from credit card (Visa, Mastercard, American Express, etc),
so I don't think there would be any reason why Bricklink would not bill you
or agree to accept a longer delay on payment.
Obviously, it does mean you should have a credit card allowed by Paypal...
|
It sounds like they won't be able to use paypal at all, with or without an
account.
|
Yes they won't be able to use it anymore.
https://fr.sputniknews.com/international/201605311025440538-paypal-quitte-turquie/
sorry it is in french^^
|
|
Author: | Heartbricker | Posted: | May 31, 2016 14:46 | Subject: | Re: Letter for Bricklink Administration | Viewed: | 92 times | Topic: | Suggestions | |
|
| In Suggestions, RobErNat writes:
| In Suggestions, basarozcan writes:
For your information: you don't need a Paypal account to pay to a
Paypal account, you can open the payment tab and select 'other method'
and pay straight from credit card (Visa, Mastercard, American Express, etc),
so I don't think there would be any reason why Bricklink would not bill you
or agree to accept a longer delay on payment.
Obviously, it does mean you should have a credit card allowed by Paypal...
|
It sounds like they won't be able to use paypal at all, with or without an
account.
|
|
Author: | RobErNat | Posted: | May 31, 2016 14:38 | Subject: | Re: Letter for Bricklink Administration | Viewed: | 105 times | Topic: | Suggestions | |
|
| In Suggestions, basarozcan writes:
| Dear Staff,
I'm one of the executive member of enclosed Turkish LEGO Users Group (Turklug)
and one of the founder of Istanbul LEGO Users Group (IstanLUG). Last 7 years
me and my friends organized Turkish LEGO Fans to be a RLUG, arranging so many
meetings, contests and community projects in our country.
We're sellers and buyers from Turkey whom deals with government's bad
decisions nowadays. After 6th of June, PayPal is retreat from our country because
of governments some regulations. Not only for bricklink we're blocked to
buy stuff and sell our works for using PayPal. PayPal authorities said that they
are working on this situation to solve immediately but nobody know when they
will solve it.
As you know Bricklink request fees only on PayPal account. We're unable to
pay our bricklink fees anymore. Please add different payment method for paying
our fees to bricklink. If it is not possible we'll want limitless postponement
to paying our fees to bricklink.
Kindly regards
|
For your information: you don't need a Paypal account to pay to a
Paypal account, you can open the payment tab and select 'other method'
and pay straight from credit card (Visa, Mastercard, American Express, etc),
so I don't think there would be any reason why Bricklink would not bill you
or agree to accept a longer delay on payment.
Obviously, it does mean you should have a credit card allowed by Paypal...
|
|
Author: | basarozcan | Posted: | May 31, 2016 14:07 | Subject: | Letter for Bricklink Administration | Viewed: | 464 times | Topic: | Suggestions | Status: | Implemented | |
|
| Dear Staff,
I'm one of the executive member of enclosed Turkish LEGO Users Group (Turklug)
and one of the founder of Istanbul LEGO Users Group (IstanLUG). Last 7 years
me and my friends organized Turkish LEGO Fans to be a RLUG, arranging so many
meetings, contests and community projects in our country.
We're sellers and buyers from Turkey whom deals with government's bad
decisions nowadays. After 6th of June, PayPal is retreat from our country because
of governments some regulations. Not only for bricklink we're blocked to
buy stuff and sell our works for using PayPal. PayPal authorities said that they
are working on this situation to solve immediately but nobody know when they
will solve it.
As you know Bricklink request fees only on PayPal account. We're unable to
pay our bricklink fees anymore. Please add different payment method for paying
our fees to bricklink. If it is not possible we'll want limitless postponement
to paying our fees to bricklink.
Kindly regards
|
|
Author: | StormChaser | Posted: | May 30, 2016 21:54 | Subject: | Inventory Change Request for Set 3368-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig cty225a Spacesuit, White Legs, Blue Short Bill Cap, Eyelashes, Black Eyebrows (Alternate) (match ID 11)
* Change 1 Minifig cty225 Spacesuit, White Legs, Blue Short Bill Cap, Eyelashes {match ID 0 to 11}
|
|
Author: | randyf | Posted: | May 30, 2016 19:04 | Subject: | Inventory Change Request for Set 41037-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part {Trans-Clear to (Not Applicable)} bb663pb02 Plastic Triangle 6 x 12 Sail with 'HLC-37' Pattern
Comments from Submitter:
I am having the PCC and images switched for this.
|
|
Author: | randyf | Posted: | May 30, 2016 17:43 | Subject: | Inventory Change Request for Set 9486-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Red {85959px1 Wave Rounded Large (Flame) with Marbled Trans-Orange / Trans-Yellow Pattern to 85959pb01a Wave Rounded Large (Flame) with Marbled Trans-Orange Pattern}
Comments from Submitter:
All online photo and video evidence shows this set with the Trans-Orange version.
|
|
Author: | randyf | Posted: | May 30, 2016 17:35 | Subject: | Inventory Change Request for Set 6863-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Red {85959px1 Wave Rounded Large (Flame) with Marbled Trans-Orange / Trans-Yellow Pattern to 85959pb01a Wave Rounded Large (Flame) with Marbled Trans-Orange Pattern}
Comments from Submitter:
All online photo and video evidence shows this set with the Trans-Orange version.
|
|
Author: | randyf | Posted: | May 30, 2016 17:24 | Subject: | Inventory Change Request for Set 70135-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Trans-Red {85959px1 Wave Rounded Large (Flame) with Marbled Trans-Orange / Trans-Yellow Pattern to 85959pb01b Wave Rounded Large (Flame) with Marbled Trans-Yellow Pattern}
Comments from Submitter:
All online photo and video evidence shows this set with the Trans-Yellow version. This fits the timeline for the part as all later Chima sets had transitioned to the Trans-Yellow variety.
|
|
Author: | ziddi | Posted: | May 30, 2016 16:40 | Subject: | Re: Inventory Change Request for Set 41015-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
|
| The star seems Magenta, but the part is Medium Lavender, to add in the inventory
of the set.
|
|
Author: | randyf | Posted: | May 30, 2016 12:17 | Subject: | Inventory Change Request for Set 8970-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Red {85959px1 Wave Rounded Large (Flame) with Marbled Trans-Orange / Trans-Yellow Pattern to 85959pb01a Wave Rounded Large (Flame) with Marbled Trans-Orange Pattern}
Comments from Submitter:
All online photo and video evidence shows this set with the Trans-Orange version. This fits the timeline for the part as it was released the year this set came out, and all early versions were of the Trans-Orange variety.
|
|
Author: | randyf | Posted: | May 30, 2016 12:10 | Subject: | Inventory Change Request for Set 7199-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Trans-Red {85959px1 Wave Rounded Large (Flame) with Marbled Trans-Orange / Trans-Yellow Pattern to 85959pb01a Wave Rounded Large (Flame) with Marbled Trans-Orange Pattern}
Comments from Submitter:
All online photo and video evidence shows this set with the Trans-Orange version. This fits the timeline for the part as it was released the year this set came out, and all early versions were of the Trans-Orange variety.
|
|
Author: | randyf | Posted: | May 30, 2016 12:03 | Subject: | Inventory Change Request for Set 7097-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Trans-Red {85959px1 Wave Rounded Large (Flame) with Marbled Trans-Orange / Trans-Yellow Pattern to 85959pb01a Wave Rounded Large (Flame) with Marbled Trans-Orange Pattern}
Comments from Submitter:
All online photo and video evidence shows this set with the Trans-Orange version. This fits the timeline for the part as it was released the year this set came out, and all early versions were of the Trans-Orange variety.
|
|
Author: | randyf | Posted: | May 30, 2016 11:57 | Subject: | Inventory Change Request for Set 5985-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Trans-Red {85959px1 Wave Rounded Large (Flame) with Marbled Trans-Orange / Trans-Yellow Pattern to 85959pb01a Wave Rounded Large (Flame) with Marbled Trans-Orange Pattern}
Comments from Submitter:
All online photo and video evidence shows this set with the Trans-Orange version. This fits the timeline for the part as all Space Police III sets should have had the Trans-Orange version.
|
|
Author: | randyf | Posted: | May 30, 2016 11:50 | Subject: | Inventory Change Request for Set 5983-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Red {85959px1 Wave Rounded Large (Flame) with Marbled Trans-Orange / Trans-Yellow Pattern to 85959pb01a Wave Rounded Large (Flame) with Marbled Trans-Orange Pattern}
Comments from Submitter:
All online photo and video evidence shows this set with the Trans-Orange version. This fits the timeline for the part as all Space Police III sets should have had the Trans-Orange version.
|
|
Author: | TakeAbricK | Posted: | May 30, 2016 05:09 | Subject: | Re: Inventory Change Request for Set 258-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, rbgeddes writes:
| In Inventories Requests, TakeAbricK writes:
| In Inventories Requests, rbgeddes writes:
| Please make changes to the following inventory:
* Change {17 to 16} Part White 3001old Brick 2 x 4 without Cross Supports
Comments from Submitter:
I've just obtained this set in virtually new condition. There are only 16 of this piece. One is in the large elephant and 15 in the white stand where the gorilla is. See pages 2 and 5 of the instructions. Based on the positions of this piece in the gorilla stand as shown in the instructions, this part of the model physically can only be built with a maximum 15 of this piece.
|
Hi,
I bought this set, boxed and with all parts present and in shiney condition,
about 8 years ago. I also build the whole set back then and after that I checked
the BL inventory. My set really has 17 white bricks 3001old. I still remember
I had some problems building that stand with gorilla's, so I tried again.
The building instruction is very difficult at this point, it doesn't show
all steps and it doesn't show all bricks. You really need other pictures
on the box to get it done, and even then ...
I tried and I tried and I tried for over half an hour to build a solid stand
with only 15 2x4 bricks, but it doesn't work for me. Did you actually build
the stand / set?
Imo the set inventory is correct. Another note: There are several other building
idea's in the Instruction / on the box that you also have to be able to build
with the bricks inside (instead of the Zoo that is). Please also keep that in
mind when checking an Inventory.
Kind regards,
Diana
|
Hi Diana,
Thank you for your reply. Yes I built the set and like you I had a hard time
with the stand. I have the box and the other models do not use anything near
16 or 17 3001old white bricks. The pictures of the zoo on the box lid and the
underside of the lid don't help either.
The first two images below are from the instructions.
In the first picture, the brick(s) holding up number 11 are hidden. Also, a 3001old
is most likely under the brick marked 'A', binding it by 2 or
4 studs to brick 9.
In the second picture, a stud can be seen that is behind brick 2. I think this
is a 3001old sitting directly behind brick 2, which would offer 4 studs of support
to brick 11.
The third picture is the model taking my suggestions from the first two pictures.
There are 13 3001old bricks in this model, with only enough room for 2 more.
The fourth picture is the model with a total of 15 3001old bricks. The fifth
picture is a slight variation on picture 4. The last two pictures provide a good
degree of stability to the stand.
Please let me know what you think Diana and please advise how you built the stand
with 16 3001old bricks!
Kind regards,
Robert
|
Hi Robert,
Thanks for all your trouble. I promiss I will check again with the help of your
images. Please just give me some time for that. Although the set is still in
my Living room I am very busy with my store at the moment. But again, I promiss
to get back on this. The large box on my dinner table will remind me, LOL
Kind regards,
Diana
|
|
Author: | jennnifer | Posted: | May 29, 2016 22:43 | Subject: | Re: Inventory Change Request for Set 41015-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, ziddi writes:
| Please make changes to the following inventory:
* Add 1 Part 50950pb100R Medium Lavender Slope, Curved 3 x 1 No Studs with Magenta, White and Medium Azure Shooting Star Pattern Model Right Side (Sticker) - Set 41015
Comments from Submitter:
I added this part yesterday, but is not magenta is Medium Lavender and the name should be changed as : "Slope, Curved 3 x 1 No Studs with Medium Lavender, White and Medium Azure Shooting Star Pattern Model Right Side (Sticker) - Set 41015"
|
Hello,
It appears that the sticker is placed upside down on the image your uploaded.
Could you please submit a correction?
Thank you!
Jen
|
|
|
Author: | StormChaser | Posted: | May 29, 2016 12:13 | Subject: | Inventory Change Request for Set 9681-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Gear Gstk112 (Not Applicable) Sticker for Storage Bin, Dacta Labels - Sheet of 2
Comments from Submitter:
Source: photos of new set which had been opened (parts still sealed in bags). This sticker sheet was included.
|
|
Author: | Brick_Wizard | Posted: | May 29, 2016 08:14 | Subject: | Inventory Change Request for Set 41008-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 14769 White Tile, Round 2 x 2 with Bottom Stud Holder (Alternate) (match ID 5)
* Change 1 Part White 4150 Tile, Round 2 x 2 {match ID 0 to 5}
Comments from Submitter:
Parting out multiple sets. Found both variants.
|
|
Author: | therobo | Posted: | May 28, 2016 18:33 | Subject: | Re: Inventory Change Request for Set 41015-1 | Viewed: | 19 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, ziddi writes:
| Please make changes to the following inventory:
* Add 1 Part 50950pb100R Medium Lavender Slope, Curved 3 x 1 No Studs with Magenta, White and Medium Azure Shooting Star Pattern Model Right Side (Sticker) - Set 41015
Comments from Submitter:
I added this part yesterday, but is not magenta is Medium Lavender and the name should be changed as : "Slope, Curved 3 x 1 No Studs with Medium Lavender, White and Medium Azure Shooting Star Pattern Model Right Side (Sticker) - Set 41015"
|
Looks like the shooting star is Magenta, White and Medium Azure:
|
|
Author: | Brick_Wizard | Posted: | May 28, 2016 16:51 | Subject: | Inventory Change Request for Set 70814-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 553c Black Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 4)
* Change 2 Part Black 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 4}
Comments from Submitter:
Just parted out 2 sets with alternate occurring in each set.
|
|
Author: | ziddi | Posted: | May 28, 2016 14:15 | Subject: | Inventory Change Request for Set 41015-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 50950pb100R Medium Lavender Slope, Curved 3 x 1 No Studs with Magenta, White and Medium Azure Shooting Star Pattern Model Right Side (Sticker) - Set 41015
Comments from Submitter:
I added this part yesterday, but is not magenta is Medium Lavender and the name should be changed as : "Slope, Curved 3 x 1 No Studs with Medium Lavender, White and Medium Azure Shooting Star Pattern Model Right Side (Sticker) - Set 41015"
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|