Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Codo | Posted: | Apr 27, 2015 21:45 | Subject: | Re: Inventory Change Request for Set 8247-1 | Viewed: | 30 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| In Inventories Requests, Codo writes:
| Please make changes to the following inventory:
* Add 1 Part 32009pb020 Red Technic, Liftarm 1 x 11.5 Double Bent Thick with Yellow '6', Gray Seat, and Black and White Grille Pattern (Stickers) - Set 8247 (Counterpart)
|
Hi
can you also check this part
http://www.bricklink.com/catalogItem.asp?P=2536
is it 2536a -b -c or -d type?
thanks
Stefaan
|
I'm sorry. I don't have this set. I just have the decorated lift arm
that I put in the inventory request change for.
|
|
Author: | Brickwilbo | Posted: | Apr 27, 2015 17:32 | Subject: | Re: SUGGESTION: My Inventory link under Welcome! | Viewed: | 32 times | Topic: | Suggestions | |
|
| In Suggestions, BUC writes:
| It would be so helpful if there was a link to 'My Inventory' under the
Welcome - next to Logoff & My Store.
Currently, access to My Inventory is buried under several clicks.
|
It's just two clicks, the same as to My orders received.
|
Author: | BUC | Posted: | Apr 27, 2015 17:26 | Subject: | SUGGESTION: My Inventory link under Welcome! | Viewed: | 109 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| It would be so helpful if there was a link to 'My Inventory' under the
Welcome - next to Logoff & My Store.
Currently, access to My Inventory is buried under several clicks.
Thanks!
|
|
Author: | elias3 | Posted: | Apr 27, 2015 01:00 | Subject: | Re: Inventory Change Request for Set 8247-1 | Viewed: | 38 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Codo writes:
| Please make changes to the following inventory:
* Add 1 Part 32009pb020 Red Technic, Liftarm 1 x 11.5 Double Bent Thick with Yellow '6', Gray Seat, and Black and White Grille Pattern (Stickers) - Set 8247 (Counterpart)
|
Hi
can you also check this part
http://www.bricklink.com/catalogItem.asp?P=2536
is it 2536a -b -c or -d type?
thanks
Stefaan
|
|
Author: | Codo | Posted: | Apr 26, 2015 22:20 | Subject: | Inventory Change Request for Set 8247-1 | Viewed: | 34 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32009pb020 Red Technic, Liftarm 1 x 11.5 Double Bent Thick with Yellow '6', Gray Seat, and Black and White Grille Pattern (Stickers) - Set 8247 (Counterpart)
|
Author: | brickapolis | Posted: | Apr 26, 2015 14:39 | Subject: | Re: Add Square Cash as Payment Method | Viewed: | 57 times | Topic: | Suggestions | |
|
| In Suggestions, RecycledBrick writes:
| Square Cash as made improvements to make it another alternative to PayPal.
|
You can sort add this as a payment method by selecting "Visa/Mastercard" and
then adding a note saying that you accept that payment using cash.me/$username.
|
|
Author: | bricks.in.bc | Posted: | Apr 26, 2015 14:36 | Subject: | Inventory Change Request for Set 40129-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3070b Blue Tile 1 x 1 with Groove (Extra)
* Add 1 Part 98138 Flat Silver Tile, Round 1 x 1 (Extra)
* Add 1 Part 4073 Trans-Bright Green Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
Source: Sealed Set Contents
|
|
Author: | happygolucky | Posted: | Apr 25, 2015 05:30 | Subject: | Inventory Change Request for Set 41074-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3004pb130 Tan Brick 1 x 2 with Lizard on Wall Pattern (Sticker) - Set 41074 (Counterpart)
* Add 1 Part 13459pb002 Black Road Sign Round on Pole with Fruit Pie and Flames Pattern on Both Sides (Stickers) - Set 41074 (Counterpart)
* Add 1 Part 30350bpb012 Medium Dark Flesh Tile, Modified 2 x 3 with 2 Clips with Muffin, Croissant and Prices Pattern (Sticker) - Set 41074 (Counterpart)
* Add 1 Part 14769pb046 Tan Tile, Round 2 x 2 with Bottom Stud Holder with Fruit Pie Pattern (Sticker) - Set 41074 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | randyf | Posted: | Apr 24, 2015 14:36 | Subject: | Inventory Change Request for Set 75046-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 30241b Light Bluish Gray Brick, Modified 1 x 1 with Clip Vertical (open O clip) - Hollow Stud (Alternate) (match ID 1)
* Change 2 Part Light Bluish Gray 30241 Brick, Modified 1 x 1 with Clip Vertical {match ID 0 to 1}
Comments from Submitter:
From sealed set contents.
|
|
Author: | randyf | Posted: | Apr 24, 2015 14:23 | Subject: | Inventory Change Request for Set 76041-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15403c01 Black Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:22 | Subject: | Inventory Change Request for Set 76038-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 15403c01 Black Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:21 | Subject: | Inventory Change Request for Set 76032-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 15403c01 Black Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:20 | Subject: | Inventory Change Request for Set 76031-1 | Viewed: | 13 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15403c01 Black Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:20 | Subject: | Inventory Change Request for Set 76030-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 15403c01 Black Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:19 | Subject: | Inventory Change Request for Set 76027-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15403c01 Black Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:19 | Subject: | Inventory Change Request for Set 76026-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15403c01 Black Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:18 | Subject: | Inventory Change Request for Set 76025-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15403c01 Black Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:17 | Subject: | Inventory Change Request for Set 70754-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15403c01 Black Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:16 | Subject: | Inventory Change Request for Set 70750-1 | Viewed: | 14 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15403c01 Black Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:15 | Subject: | Inventory Change Request for Set 70168-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15403c01 Black Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:15 | Subject: | Inventory Change Request for Set 70166-1 | Viewed: | 15 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15403c01 Black Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:14 | Subject: | Inventory Change Request for Set 70170-1 | Viewed: | 12 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 15403c01 White Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 24, 2015 14:13 | Subject: | Inventory Change Request for Set 70169-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15403c01 White Plate, Modified 1 x 2 with Mini Blaster with Dark Bluish Gray Trigger - Complete Assembly (Counterpart)
|
|
Author: | happygolucky | Posted: | Apr 24, 2015 04:27 | Subject: | Inventory Change Request for Set 70143-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 47456pb08L Dark Orange Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Rust and 3 Rivets Pattern Model Left Side (Sticker) - Set 70143 (Counterpart)
* Add 1 Part 47456pb08R Dark Orange Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Rust and 4 Rivets Pattern Model Right Side (Sticker) - Set 70143 (Counterpart)
* Add 1 Part 47456pb07L Dark Orange Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Rust, Grille and Rivets Pattern Model Left Side (Sticker) - Set 70143 (Counterpart)
* Add 1 Part 47456pb07R Dark Orange Brick, Modified 2 x 3 x 2/3 Two Studs, Wing End with Rust, Grille and Rivets Pattern Model Right Side (Sticker) - Set 70143 (Counterpart)
* Add 1 Part 61678pb079 White Slope, Curved 4 x 1 No Studs with Dark Orange Crisscross Swirls and Stars Pattern (Sticker) - Set 70143 (Counterpart)
* Add 1 Part 93606pb033 Dark Orange Slope, Curved 4 x 2 No Studs with Tiger Stripes, Armor Plates and Rivets Pattern (Sticker) - Set 70143 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | elias3 | Posted: | Apr 23, 2015 21:09 | Subject: | Re: Inventory Change Request for Set 385-2 | Viewed: | 27 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Cyno01 writes:
| Please make changes to the following inventory:
* Delete 3 Part 7049b Black Brick, Modified 2 x 4 with Wheels Holder Old, Clear Bottom
* Add 3 Part 4180 Black Brick, Modified 2 x 4 with Wheels Holder Freestyle
|
Hi
What is your source for this request?
Stefaan
|
|
Author: | Cyno01 | Posted: | Apr 23, 2015 20:57 | Subject: | Inventory Change Request for Set 385-2 | Viewed: | 38 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 3 Part 7049b Black Brick, Modified 2 x 4 with Wheels Holder Old, Clear Bottom
* Add 3 Part 4180 Black Brick, Modified 2 x 4 with Wheels Holder Freestyle
|
Author: | therobo | Posted: | Apr 23, 2015 17:57 | Subject: | Re: In My Inventory - distinguish new from used | Viewed: | 35 times | Topic: | Suggestions | |
|
| In Suggestions, brickcounter writes:
| On the bottom left of the CatalogItem page, would it be possible to denote whether
the lots listed under the "In My Inventory" heading, are New or Used? Red /
Blue coloured brackets would be perfect, if technically possible.
|
BUMP...
|
Author: | randyf | Posted: | Apr 23, 2015 14:46 | Subject: | Inventory Change Request for Minifig sw515 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [M=sw515]
* Change 2 Part {Dark Bluish Gray to White} 87569pb01 Leg Mechanical, General Grievous with Dark Bluish Gray Foot Pattern
Comments from Submitter:
Following completion of http://www.bricklink.com/message.asp?ID=908345
|
|
Author: | randyf | Posted: | Apr 23, 2015 14:45 | Subject: | Inventory Change Request for Minifig sw254 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory: [M=sw254]
* Change 2 Part {Dark Bluish Gray to Tan} 87569pb01 Leg Mechanical, General Grievous with Dark Bluish Gray Foot Pattern
Comments from Submitter:
Following completion of http://www.bricklink.com/message.asp?ID=908345
|
|
Author: | happygolucky | Posted: | Apr 23, 2015 05:24 | Subject: | Inventory Change Request for Set 70143-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 42022pb33 Dark Bluish Gray Slope, Curved 6 x 1 with Rivets, Rust, White Arrow and Alien Characters Pattern (Sticker) - Set 70143 (Counterpart)
* Add 1 Part 41748pb059 Dark Tan Wedge 6 x 2 Left with Tiger Stripes, Alien Skull, Metal Plates and Rivets Pattern (Stickers) - Set 70143 (Counterpart)
* Add 1 Part 41747pb059 Dark Tan Wedge 6 x 2 Right with Tiger Stripes, Alien Skull, Metal Plates and Rivets Pattern (Stickers) - Set 70143 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | happygolucky | Posted: | Apr 23, 2015 05:19 | Subject: | Inventory Change Request for Set 60086-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 62812pb05 Red Boat, Rubber Raft, Large with 'FIRE 60086' and Fire Logo Pattern on Both Sides (Stickers) - Set 60086 (Counterpart)
* Add 1 Part 30602pb073L White Slope, Curved 2 x 2 Lip, No Studs with Blue 'AMBULANCE' Pattern Model Left Side (Sticker) - Set 60086 (Counterpart)
* Add 1 Part 30602pb073R White Slope, Curved 2 x 2 Lip, No Studs with Blue 'AMBULANCE' Pattern Model Right Side (Sticker) - Set 60086 (Counterpart)
* Add 2 Part 30602pb074 White Slope, Curved 2 x 2 Lip, No Studs with Silver Police Badge Pattern (Sticker) - Set 60086 (Counterpart)
* Add 1 Part 6239pb047 White Tail Shuttle with EMT Star of Life (Blue Snake) Pattern on Both Sides (Stickers) - Set 60086 (Counterpart)
* Add 1 Part 3069bpb375 White Tile 1 x 2 with EMT Star of Life and 2 Fastening Straps with Clips Pattern (Sticker) - Set 60086 (Counterpart)
* Add 1 Part 45677pb083 White Wedge 4 x 4 x 2/3 Triple Curved with '06' in Black Circle Pattern (Sticker) - Set 60086 (Counterpart)
* Add 2 Part 14137pb001 Black Hinge Plate 1 x 8 with Angled Side Extensions, Squared Plate Underside with 2 Yellow Stripes Pattern (Sticker) (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | ZwarteMagica | Posted: | Apr 23, 2015 02:43 | Subject: | Inventory Change Request for Set 7285-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3037pb038 White Slope 45 2 x 4 with White 'POLICE' Blue Background Wide Pattern on Backside (Sticker) - Set 7285 (Counterpart)
* Change {2 to 1} Part White 3010pb152 Brick 1 x 4 with White 'POLICE' Short Font on Blue Background Pattern (Sticker) (Counterpart)
|
|
Author: | viejos | Posted: | Apr 23, 2015 02:16 | Subject: | Re: Inventory Change Request for Set 70012-2 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, viejos writes:
| Please make changes to the following inventory:
* Change {3 to 4} Part Blue 6558 Technic, Pin Long with Friction Ridges Lengthwise
Comments from Submitter:
Book 1, p. 22 (2x)
Book 2, p. 65 (2x)
|
Correction:
Book 1, p. 22 (2x)
Book 1, p. 65 (2x)
|
|
Author: | viejos | Posted: | Apr 23, 2015 02:15 | Subject: | Inventory Change Request for Set 70012-2 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {3 to 4} Part Blue 6558 Technic, Pin Long with Friction Ridges Lengthwise
Comments from Submitter:
Book 1, p. 22 (2x)
Book 2, p. 65 (2x)
|
|
Author: | axaday | Posted: | Apr 22, 2015 21:44 | Subject: | Separate min buy for international? | Viewed: | 129 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| Could we get separate settings for minimum buy on international orders?
I posted in the selling forum and someone said to repost here. They gave me
some suggestions in that thread that mitigated some of my concerns, but there
is still the extra international PayPal fee and some extra hassle. For the moment,
I have changed my settings to only ship to the US, but I don't want to be
a spoiled brat. I buy from international stores myself. My $5 min buy works
pretty well for domestic orders, but I'd rather it was a little higher for
international.
|
|
Author: | WILYKAT | Posted: | Apr 22, 2015 06:56 | Subject: | Re: suggest fixing the offline image | Viewed: | 39 times | Topic: | Suggestions | |
|
| In Suggestions, MassBricks writes:
| In Suggestions, WILYKAT writes:
| Where does it say the picture is Star Wars themed? It's just mere coincidence
that the 2 minifigs look like copyrighted character from the movie. The rest
of the moc doesn't have any Disney look or feel.
|
Haha..
I just know Disney is not an entity you want to get a lawsuit from.
|
Yeah :/ if I tried to sell a set of 3 circles, 2 small and one large they'd
probably claim I am ripping off the silhouette of a certain mouse. They are a
tad touchy about copyright issues.
|
|
Author: | Nordbart | Posted: | Apr 22, 2015 06:44 | Subject: | Re: suggest fixing the offline image | Viewed: | 30 times | Topic: | Suggestions | |
|
| In Suggestions, MassBricks writes:
| In Suggestions, WILYKAT writes:
| Where does it say the picture is Star Wars themed? It's just mere coincidence
that the 2 minifigs look like copyrighted character from the movie. The rest
of the moc doesn't have any Disney look or feel.
|
Haha..
I just know Disney is not an entity you want to get a lawsuit from.
|
On one side, this is fanart and therefor ok. On the other side this is a Commercial
side. But what about all those minifig Images in the catalog?
There are arguments for both side here.
Nordbart
|
|
Author: | MassBricks | Posted: | Apr 22, 2015 06:40 | Subject: | Re: suggest fixing the offline image | Viewed: | 36 times | Topic: | Suggestions | |
|
| In Suggestions, WILYKAT writes:
| Where does it say the picture is Star Wars themed? It's just mere coincidence
that the 2 minifigs look like copyrighted character from the movie. The rest
of the moc doesn't have any Disney look or feel.
|
Haha..
I just know Disney is not an entity you want to get a lawsuit from.
|
|
Author: | WILYKAT | Posted: | Apr 22, 2015 05:24 | Subject: | Re: suggest fixing the offline image | Viewed: | 42 times | Topic: | Suggestions | |
|
| In Suggestions, MassBricks writes:
| In Suggestions, WILYKAT writes:
| The offline image still shows illegal non-LEGO part being used for hinges on
the top. I would suggest using
and
they can form equivalent 2x2 to 2x2 hinge plates and is 100% legal LEGO build.
|
I would also suggest not using copyrighted material if BrickLink does not have
permission from the copyright holder (Disney).
|
Where does it say the picture is Star Wars themed? It's just mere coincidence
that the 2 minifigs look like copyrighted character from the movie. The rest
of the moc doesn't have any Disney look or feel.
|
|
Author: | WoutR | Posted: | Apr 22, 2015 04:00 | Subject: | Re: suggest fixing the offline image | Viewed: | 48 times | Topic: | Suggestions | |
|
| In Suggestions, Nordbart writes:
| In Suggestions, WILYKAT writes:
| The offline image still shows illegal non-LEGO part being used for hinges on
the top. I would suggest using p=60478 and p=63868
they can form equivalent 2x2 to 2x2 hinge plates and is 100% legal LEGO build.
|
|
They cannot replace the hinges because they did not make the MOC.
They would have to build something new (and yes, only LEGO please).
I wonder if it is used with permission, or if they just removed the photographers
mark.
https://www.flickr.com/photos/storm_tk431/6599195483/
| Why did I see this Topic comming? After every downtime the same complaints Keep
coming up.
Nordbart
|
Because sadly nobody cared enough to actually change the image.
| PS: My Suggestion would be an original MOC-Picture, not just a SW moc.
|
Yes please!
|
|
Author: | Nordbart | Posted: | Apr 22, 2015 03:02 | Subject: | Re: suggest fixing the offline image | Viewed: | 45 times | Topic: | Suggestions | |
|
| In Suggestions, WILYKAT writes:
| The offline image still shows illegal non-LEGO part being used for hinges on
the top. I would suggest using
and
they can form equivalent 2x2 to 2x2 hinge plates and is 100% legal LEGO build.
|
Why did I see this Topic comming? After every downtime the same complaints Keep
coming up.
Nordbart
PS: My Suggestion would be an original MOC-Picture, not just a SW moc.
|
|
Author: | MassBricks | Posted: | Apr 22, 2015 02:57 | Subject: | Re: suggest fixing the offline image | Viewed: | 50 times | Topic: | Suggestions | |
|
| In Suggestions, WILYKAT writes:
| The offline image still shows illegal non-LEGO part being used for hinges on
the top. I would suggest using
and
they can form equivalent 2x2 to 2x2 hinge plates and is 100% legal LEGO build.
|
I would also suggest not using copyrighted material if BrickLink does not have
permission from the copyright holder (Disney).
|
|
Author: | WILYKAT | Posted: | Apr 22, 2015 02:05 | Subject: | suggest fixing the offline image | Viewed: | 156 times | Topic: | Suggestions | Status: | Discarded | |
|
| The offline image still shows illegal non-LEGO part being used for hinges on
the top. I would suggest using
and
they can form equivalent 2x2 to 2x2 hinge plates and is 100% legal LEGO build.
|
|
|
Author: | dutchtreat | Posted: | Apr 21, 2015 16:57 | Subject: | Re: Attach image to thank you,drive thru message | Viewed: | 28 times | Topic: | Suggestions | |
|
| In Suggestions, tEoS writes:
Thanks for your reply, and sorry for my late answer.
This would be an option, but quite work intensive and everyone can see the pictures
(not so nice from a privacy viewpoint).
I don't want to upload files to bricklink, but just attach a picture of the
packed order.
Other webshops, for example fasttech, uses this very much to my liking. But hey,
I guess I can't have it all
Greets,
Dutch
|
|
Author: | randyf | Posted: | Apr 21, 2015 03:51 | Subject: | Re: Changes to the Feedback Page | Viewed: | 43 times | Topic: | Suggestions | |
|
| In Suggestions, billduge writes:
| It would be very nice if we could actually filter this page. Things like lets
only see the feedback from a specific country or lets see the feedback as a buyer.
This would be helpful as it doesn't appear possible any other way at present.
We have had some new customers who have come from countries where we don't
normally receive orders and the customers are showing lower feedback than we
are comfortable with for fairly large orders.
Would be nice to see if anyone else, for example, in the UK has served these
customers, without having to scroll through the feedback until you either recognise
a store or look up each store.
The same also applies to buyers.
|
At the bottom of the summary feedback page, there is a section that says "S/B
indicates whether {username} was the Seller or Buyer
in that transaction."
Clicking on the Seller or Buyer hyperlinks filters the feedback by each of those
criteria.
Cheers,
Randy
|
|
Author: | yorbrick | Posted: | Apr 21, 2015 03:44 | Subject: | Re: Changes to the Feedback Page | Viewed: | 30 times | Topic: | Suggestions | |
|
| Yes, that would be useful. Filter by country, pos / neg, buyer / seller. |
|
Author: | calsbricks | Posted: | Apr 21, 2015 03:35 | Subject: | Changes to the Feedback Page | Viewed: | 130 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| It would be very nice if we could actually filter this page. Things like lets
only see the feedback from a specific country or lets see the feedback as a buyer.
This would be helpful as it doesn't appear possible any other way at present.
We have had some new customers who have come from countries where we don't
normally receive orders and the customers are showing lower feedback than we
are comfortable with for fairly large orders.
Would be nice to see if anyone else, for example, in the UK has served these
customers, without having to scroll through the feedback until you either recognise
a store or look up each store.
The same also applies to buyers.
|
|
Author: | happygolucky | Posted: | Apr 21, 2015 03:13 | Subject: | Inventory Change Request for Set 42036-1 | Viewed: | 33 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 41239pb005 Red Technic, Liftarm 1 x 13 Thick with Black Rectangle Pattern (Sticker) - Set 42036 (Counterpart)
* Add 1 Part 87080pb022 Medium Blue Technic, Panel Fairing # 1 Small Smooth Short, Side A with 'LT1', Red Stripe and Carbon Fiber Pattern (Sticker) - Set 42036 (Counterpart)
* Add 1 Part 87086pb022 Medium Blue Technic, Panel Fairing # 2 Small Smooth Short, Side B with Red Stripe and Carbon Fiber Pattern (Sticker) - Set 42036 (Counterpart)
* Add 1 Part 64681pb014 Medium Blue Technic, Panel Fairing # 5 Long Smooth, Side A with 'STREET EXTREME' on Red Background Pattern (Sticker) - Set 42036 (Counterpart)
* Add 1 Part 64393pb014 Medium Blue Technic, Panel Fairing # 6 Long Smooth, Side B with 'STREET EXTREME' on Red Background Pattern (Sticker) - Set 42036 (Counterpart)
* Add 1 Part 64683pb015 Medium Blue Technic, Panel Fairing # 3, Small Smooth Long, Side A with 'LT1' Pattern (Sticker) - Set 42036 (Counterpart)
* Add 1 Part 64683pb016 Medium Blue Technic, Panel Fairing # 3, Small Smooth Long, Side A with Red Triangle and Carbon Fiber Pattern (Sticker) - Set 42036 (Counterpart)
* Add 1 Part 64394pb004 Black Technic, Panel Fairing #13 Large Short Smooth, Side A with Carbon Fiber Air Intake Pattern (Sticker) - Set 42036 (Counterpart)
* Add 1 Part 64680pb004 Black Technic, Panel Fairing #14 Large Short Smooth, Side B with Carbon Fiber Air Intake Pattern (Sticker) - Set 42036 (Counterpart)
* Add 1 Part 64391pb015 Medium Blue Technic, Panel Fairing # 4, Small Smooth Long, Side B with 'LT1' Pattern (Sticker) - Set 42036 (Counterpart)
* Add 1 Part 64391pb016 Medium Blue Technic, Panel Fairing # 4, Small Smooth Long, Side B with Red Triangle and Carbon Fiber Pattern (Sticker) - Set 42036 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | happygolucky | Posted: | Apr 21, 2015 03:06 | Subject: | Inventory Change Request for Set 76027-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 87587pb02 Dark Bluish Gray Shark Head with Rounded Nose with Oscilloscope and Armor Plates Pattern (Sticker) - Set 76027 (Counterpart)
* Add 1 Part 87587pb03 Dark Bluish Gray Shark Head with Rounded Nose with Black Eyes, Oscilloscope and Armor Plates Pattern (Sticker) - Set 76027 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | BLUSER_453707 | Posted: | Apr 21, 2015 01:16 | Subject: | Re: Quote cancellation | Viewed: | 54 times | Topic: | Suggestions | |
|
| In Suggestions, qwertyboy writes:
| For a second time in two days, a quote which we replied to was automatically
canceled because an item was bought by another customer. This has left us with
very upset customers.
While I understand these quotes are no longer valid, having them canceled automatically
without any explanation (especially to the customer) is unacceptable. If
the system is able to cancel quotes for this reason, the system should at least
send a simple email to the parties involved.
As well, currently there is no way of telling why quotes were canceled. You cannot
even tell if the customer decided to cancel, and you cannot easily tell if the
system auto-canceled by comparing quote change and order creation times, as cancellation
appears to happen "some time" within an hour of order placement.
So my suggestion is twofold:
- Send both buyer and seller an email whenever a quote gets canceled and put
the cancel "trigger" in the message (like either "canceled by buyer" or "canceled
by system because item xxxx is no longer available");
- Record the reason for cancellation in the quote request, so this is available
for future reference.
Tnx, Niek.
|
No, it has happened to me as well. Requested a quote from a seller in Europe
to verify the shipping cost. They replied and before I could purchase... gone.
|
|
Author: | Royroy | Posted: | Apr 20, 2015 19:19 | Subject: | Re: Quote cancellation | Viewed: | 47 times | Topic: | Suggestions | |
|
| In Suggestions, qwertyboy writes:
| Just had to tell a third customer their quote got cancelled without explanation.
Are the two shops in this thread really the only ones having issues with this
implementation?
A message to both seller and prospective buyer is easy to implement and would
go a long way towards mitigating some of the frustration.
Niek.
|
Never had the issue myself, but I can imagine it is a very lousy buyer experience
to those where it happens to.
|
|
Author: | qwertyboy | Posted: | Apr 20, 2015 15:03 | Subject: | Re: Quote cancellation | Viewed: | 51 times | Topic: | Suggestions | |
|
| Just had to tell a third customer their quote got cancelled without explanation.
Are the two shops in this thread really the only ones having issues with this
implementation?
A message to both seller and prospective buyer is easy to implement and would
go a long way towards mitigating some of the frustration.
Niek.
|
Author: | bb76155 | Posted: | Apr 20, 2015 10:52 | Subject: | Re: Quote cancellation | Viewed: | 61 times | Topic: | Suggestions | |
|
| Unfortunately, we have had the same problems. Due to this we have stopped allowing
Quotes through the Brick Link system. We have gone back to just allowing customers
to email us asking about a quote and placing items on hold for them until they
decide.
Tamara
|
|
Author: | qwertyboy | Posted: | Apr 20, 2015 10:24 | Subject: | Quote cancellation | Viewed: | 295 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
|
| For a second time in two days, a quote which we replied to was automatically
canceled because an item was bought by another customer. This has left us with
very upset customers.
While I understand these quotes are no longer valid, having them canceled automatically
without any explanation (especially to the customer) is unacceptable. If
the system is able to cancel quotes for this reason, the system should at least
send a simple email to the parties involved.
As well, currently there is no way of telling why quotes were canceled. You cannot
even tell if the customer decided to cancel, and you cannot easily tell if the
system auto-canceled by comparing quote change and order creation times, as cancellation
appears to happen "some time" within an hour of order placement.
So my suggestion is twofold:
- Send both buyer and seller an email whenever a quote gets canceled and put
the cancel "trigger" in the message (like either "canceled by buyer" or "canceled
by system because item xxxx is no longer available");
- Record the reason for cancellation in the quote request, so this is available
for future reference.
Tnx, Niek.
|
|
Author: | Trejean | Posted: | Apr 20, 2015 10:22 | Subject: | Inventory Change Request for Set 75082-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 3794b Dark Bluish Gray Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 1)
* Add 6 Part 3794b Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 2)
* Change 4 Part Dark Bluish Gray 15573 Plate, Modified 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) {match ID 0 to 1}
* Change 6 Part Light Bluish Gray 15573 Plate, Modified 1 x 2 with 1 Stud with Groove and Inside Stud Holder (Jumper) {match ID 0 to 2}
Comments from Submitter:
verified in sealed sets
|
|
Author: | happygolucky | Posted: | Apr 20, 2015 08:13 | Subject: | Inventory Change Request for Set 10684-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3464c03 White Wheel Center Small with Stub Axles (Pulley Wheel), with Black Tire 14mm D. x 4mm (3464 / 59895) (Counterpart)
|
|
Author: | happygolucky | Posted: | Apr 20, 2015 06:18 | Subject: | Inventory Change Request for Set 76027-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 58846pb14L Black Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout with Oscilloscope and Red Light Bars Pattern Model Left (Sticker) - Se (Counterpart)
* Add 1 Part 58846pb14R Black Brick, Round Corner 10 x 10 with Slope 33 Edge, Axle Hole, Facet Cutout with Oscilloscope and Red Light Bars Pattern Model Right (Sticker) - S (Counterpart)
* Add 1 Part 3298pb061 Dark Bluish Gray Slope 33 3 x 2 with Head-Up Display (HUD), Red Light Bar and Buttons Pattern (Sticker) - Set 76027 (Counterpart)
* Add 1 Part 15068pb022 Black Slope, Curved 2 x 2 No Studs with Yellow Batman Logo Pattern (Sticker) - Set 76027 (Counterpart)
* Add 1 Part 88930pb053 Black Slope, Curved 2 x 4 x 2/3 No Studs with Bottom Tubes with Red Manta Head and Armor Plates Pattern (Sticker) - Set 76027 (Counterpart)
* Add 1 Part 14769pb045 Black Tile, Round 2 x 2 with Bottom Stud Holder with Oscilloscope, Armor Plates and Black and Red Circles Pattern (Sticker) - Set 76027 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | viejos | Posted: | Apr 19, 2015 19:43 | Subject: | Re: Inventory Change Request for Set 8880-1 | Viewed: | 45 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, k8drums writes:
| Please make changes to the following inventory:
* Change 4 Part Black {2736 Technic, Axle Towball to 6628 Technic, Pin with Friction Ridges Lengthwise and Towball}
Comments from Submitter:
item #2736 (Black Technic, Axle Towball) is incorrect. It needs to be item #6628 (Black Technic, Pin with Friction Ridges Lengthwise and Towball)nI know this because I ordered the parts via this inventory, and the axle towball does not work, plus the picture shows the pin towball.
|
Part no. 6628 is already an alternate part in this inventory (see match no. 4):
Part no. 2736:
...is necessary when the set comes with the steering arm with axle connection:
Russell
|
|
Author: | LordSkylark | Posted: | Apr 19, 2015 19:40 | Subject: | Inventory Change Request for Set 852741-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Trans-Red {85959px1 Wave Rounded Large (Flame) with Marbled Trans-Orange / Trans-Yellow Pattern to 85959pb01a Wave Rounded Large (Flame) with Marbled Trans-Orange Pattern}
Comments from Submitter:
From personally owned set.
|
|
Author: | k8drums | Posted: | Apr 19, 2015 16:55 | Subject: | Inventory Change Request for Set 8880-1 | Viewed: | 43 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 4 Part Black {2736 Technic, Axle Towball to 6628 Technic, Pin with Friction Ridges Lengthwise and Towball}
Comments from Submitter:
item #2736 (Black Technic, Axle Towball) is incorrect. It needs to be item #6628 (Black Technic, Pin with Friction Ridges Lengthwise and Towball)nI know this because I ordered the parts via this inventory, and the axle towball does not work, plus the picture shows the pin towball.
|
|
Author: | calsbricks | Posted: | Apr 19, 2015 10:26 | Subject: | Inventory Change Request for Set 7671-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 32064 Dark Bluish Gray Technic, Brick 1 x 2 with Axle Hole (Alternate)
Comments from Submitter:
2 Sets parted out both had Old style
|
|
Author: | brickinmiheart | Posted: | Apr 19, 2015 07:38 | Subject: | Inventory Change Request for Gear 852009 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 59 Chrome Gold Minifig, Weapon Sword, Greatsword Round
* Add 1 Part 59 Chrome Silver Minifig, Weapon Sword, Greatsword Round
* Add 1 Part 59229 Dark Bluish Gray Minifig, Weapon Sword, Scythe Blade with Clip Pommel
|
|
Author: | happygolucky | Posted: | Apr 18, 2015 06:12 | Subject: | Inventory Change Request for Set 76027-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Book 6112152 Super Heroes Comic Book, DC Comics, Gorilla Grodd & Darkseid (Batman & Superman Logo)
* Add 1 Part 87587pb01 Dark Bluish Gray Shark Head with Rounded Nose with Black Eyes Pattern (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 87587 Shark Head with Rounded Nose {match ID 0 to 1}
Comments from Submitter:
Found this Shark head variation in my set. Thank you.
|
|
Author: | happygolucky | Posted: | Apr 18, 2015 04:21 | Subject: | Inventory Change Request for Set 60074-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 45677pb082 Yellow Wedge 4 x 4 x 2/3 Triple Curved with Grilles, Hatches and Screws Pattern (Sticker) - Set 60074 (Counterpart)
* Add 1 Part 3001pb100L Yellow Brick 2 x 4 with '60074' and Hatch and Red and White Danger Stripes on End Pattern Left (Stickers) - Set 60074 (Counterpart)
* Add 1 Part 3001pb100R Yellow Brick 2 x 4 with '60074' and Hatch and Red and White Danger Stripes on End Pattern Right (Stickers) - Set 60074 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | QA_Ryan | Posted: | Apr 17, 2015 18:28 | Subject: | Re: Add Qty Wanted in Shopping Carts sent via MSG | Viewed: | 32 times | Topic: | Suggestions | |
|
| In Suggestions, Rob_and_Shelagh writes:
| In Suggestions, QA_Ryan writes:
| The quantity value is a field in the shopping cart so it does not get picked
up by the operating systems copy functionality. Why are they copying and pasting
a shopping cart page into a message though?
|
That is how people have always asked for a shipping quote and, as per the message
prior to yours in the thread, this way the quote does not vanish if one of the
items sells. As per the thread following the release of the quote system, this
is why many people have not adopted the quote system, they are waiting to hear
if it will be developed to overcome this limitation. Do you know if this is being
worked Ryan?
Robert
|
I see, thanks for clarifying Robert. I know that is the most requested improvement
for quotes along with a way to know if a store accepts quotes or not before checking
out. I don't know if its being worked on right now because a big upgrade
to the back end is currently underway but I know they are on the list.
|
|
Author: | maggiec | Posted: | Apr 17, 2015 18:03 | Subject: | Inventory Change Request for Set 8108-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 5 Part Dark Bluish Gray {57910u Technic, Brick Modified 2 x 2 with Ball Receptacle (undetermined width) and Axle Hole to 57910 Technic, Brick Modified 2 x 2 with Ball Receptacle and Axle Hole}
Comments from Submitter:
Thanks!
|
|
Author: | happygolucky | Posted: | Apr 17, 2015 06:08 | Subject: | Inventory Change Request for Set 76026-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 63864pb032 White Tile 1 x 3 with 'Banana Co.' Pattern (Sticker) - Set 76026 (Counterpart)
* Add 1 Part 3822pb023 Blue Door 1 x 3 x 1 Left with Running Banana Pattern (Sticker) - Set 76026 (Counterpart)
* Add 1 Part 3821pb023 Blue Door 1 x 3 x 1 Right with Running Banana Pattern (Sticker) - Set 76026 (Counterpart)
* Add 1 Part 92593pb022 Light Bluish Gray Plate, Modified 1 x 4 with 2 Studs with White Gorilla Silhouette on Screen Pattern (Sticker) - Set 76026 (Counterpart)
* Add 1 Part 3069bpb372 Yellow Tile 1 x 2 with 'K AM 581H' Pattern (Sticker) - Set 76026 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | randyf | Posted: | Apr 16, 2015 14:46 | Subject: | Inventory Change Request for Set 70166-1 | Viewed: | 32 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 70166stk01b (Not Applicable) Sticker for Set 70166 - North American Version - (20143/6103569) (Alternate) (match ID 1)
* Change 1 Part (Not Applicable) 70166stk01a Sticker for Set 70166 - International Version - (20141/6103470) {match ID 0 to 1}
|
|
Author: | viejos | Posted: | Apr 16, 2015 09:06 | Subject: | Re: Inventory Change Request for Set 8286-1 | Viewed: | 20 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, mandr writes:
| Please make changes to the following inventory:
* Delete 1 Part 3069bpb058 Light Gray Tile 1 x 2 with Headlights Dual Pattern (Sticker) (Counterpart)
Comments from Submitter:
Part 3069bpb058 (Light Gray Tile 1x2 with Headlight sticker) is listed as a counterpart for this set. However, the set does not have a Light Gray Tile 1x2 listed. Moreover, the Headlight sticker should go on the Black Hinge Brick (part 3937pb02). I've checked my instruction booklet and I can't find any mention of a Light Gray 1x2 tile, nor can I find it mentioned in the instruction booklet online. Also Peeron does not list a Light Gray 1x2 Tile. So I don't think this counterpart is part of the set.
|
Yes, the sticker is used twice on part 3937 (once on the helicopter and once
on the sub), but nowhere else:
|
|
Author: | mandr | Posted: | Apr 16, 2015 08:37 | Subject: | Inventory Change Request for Set 8286-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3069bpb058 Light Gray Tile 1 x 2 with Headlights Dual Pattern (Sticker) (Counterpart)
Comments from Submitter:
Part 3069bpb058 (Light Gray Tile 1x2 with Headlight sticker) is listed as a counterpart for this set. However, the set does not have a Light Gray Tile 1x2 listed. Moreover, the Headlight sticker should go on the Black Hinge Brick (part 3937pb02). I've checked my instruction booklet and I can't find any mention of a Light Gray 1x2 tile, nor can I find it mentioned in the instruction booklet online. Also Peeron does not list a Light Gray 1x2 Tile. So I don't think this counterpart is part of the set.
|
|
Author: | jennnifer | Posted: | Apr 16, 2015 08:28 | Subject: | Inventory Change Request for Set 8064-1 | Viewed: | 27 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {5306bc015 Electric, Wire with Brick 2 x 2 x 2/3 Pair, 15 Studs Long to 5306bc162 Electric, Wire with Brick 2 x 2 x 2/3 Pair, 162 Studs Long}
Comments from Submitter:
Follow up from this thread:
http://www.bricklink.com/message.asp?ID=906700
|
|
Author: | randyf | Posted: | Apr 15, 2015 23:12 | Subject: | Inventory Change Request for Set 70413-1 | Viewed: | 31 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 15391c01 Light Bluish Gray Minifig, Weapon Gun, Blaster Mini with Dark Bluish Gray Trigger, Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 15, 2015 23:03 | Subject: | Inventory Change Request for Set 70411-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 15391c01 Light Bluish Gray Minifig, Weapon Gun, Blaster Mini with Dark Bluish Gray Trigger, Complete Assembly (Counterpart)
|
Author: | randyf | Posted: | Apr 15, 2015 22:53 | Subject: | Inventory Change Request for Set 30293-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15391c01 Black Minifig, Weapon Gun, Blaster Mini with Dark Bluish Gray Trigger, Complete Assembly (Counterpart)
|
|
Author: | PurpleDave | Posted: | Apr 15, 2015 14:50 | Subject: | Re: Ban sellers asking for Friends PayPal payment | Viewed: | 37 times | Topic: | Suggestions | |
|
| In Suggestions, RobErNat writes:
| He is a buyer only... He means he doesn't use them when he gets them
from sellers, as by using 2 PC's he would need to handcopy them letter by
letter...
|
That's exactly right. And the reason I do that is so any random virus or
malware that I run into while just surfing the internet can't keylog me when
I'm logging into a site that has access to my financials or where I'm
typing in a CC number.
|
|
Author: | RobErNat | Posted: | Apr 15, 2015 14:47 | Subject: | Re: Ban sellers asking for Friends PayPal payment | Viewed: | 38 times | Topic: | Suggestions | |
|
| In Suggestions, capjls writes:
| In Suggestions, PurpleDave writes:
| Embedded payment links are a huge pain to hand-type, so I never use them.
|
You can add the link to the "Custom Order Invoice" setting. Then you just type
it once.
|
He is a buyer only... He means he doesn't use them when he gets them
from sellers, as by using 2 PC's he would need to handcopy them letter by
letter...
|
|
Author: | capjls | Posted: | Apr 15, 2015 14:15 | Subject: | Re: Ban sellers asking for Friends PayPal payment | Viewed: | 38 times | Topic: | Suggestions | |
|
| In Suggestions, PurpleDave writes:
| Embedded payment links are a huge pain to hand-type, so I never use them.
|
You can add the link to the "Custom Order Invoice" setting. Then you just type
it once.
|
|
Author: | viejos | Posted: | Apr 15, 2015 14:08 | Subject: | Re: Inventory Change Request for Minifig sp007 | Viewed: | 37 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, RobErNat writes:
| In Inventories Requests, jenwick writes:
| What is the policy regarding the head for this figure and why? Thanks in advance
for your reply.
|
Heads - For figures with moveable arms and legs always use a head with an open
stud. When there are 2 entries in the catalog for the same head, one with an
open stud and one with a solid stud, always use the one with an open stud. Only
figures using old type torsos and/or legs (part no 17 and 15 respectively) can
have solid stud heads.
Older figs are normally with the solid stud head (up to the '90), yet, BL
took the decision a long time ago to use 'head with open stud' for all
figs with movable arms in their inventories. Technicly not correct offcourse...
Changing it all now is quite complicated and alternate heads are not possible
(but might be one of the options)
|
Issue is still on the table:
http://www.bricklink.com/message.asp?ID=902464
|
|
Author: | RobErNat | Posted: | Apr 15, 2015 13:34 | Subject: | Re: Inventory Change Request for Minifig sp007 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, jenwick writes:
| What is the policy regarding the head for this figure and why? Thanks in advance
for your reply.
|
Heads - For figures with moveable arms and legs always use a head with an open
stud. When there are 2 entries in the catalog for the same head, one with an
open stud and one with a solid stud, always use the one with an open stud. Only
figures using old type torsos and/or legs (part no 17 and 15 respectively) can
have solid stud heads.
Older figs are normally with the solid stud head (up to the '90), yet, BL
took the decision a long time ago to use 'head with open stud' for all
figs with movable arms in their inventories. Technicly not correct offcourse...
Changing it all now is quite complicated and alternate heads are not possible
(but might be one of the options)
|
|
Author: | jenwick | Posted: | Apr 15, 2015 13:25 | Subject: | Re: Inventory Change Request for Minifig sp007 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, 62Bricks writes:
| In Inventories Requests, RobErNat writes:
| In Inventories Requests, viejos writes:
| In Inventories Requests, Sean_Stevens writes:
| Please make changes to the following inventory:
* Add 1 Minifig sp007 Classic Space - Yellow with Airtanks
Comments from Submitter:
I have a yellow classic space minifig with a stickered torso. I cannot see one listed
|
You'll need to add it to the catalog instead of submitting an inventory change
request. The catalog will only add minifigs that came officially in sets, so
perhaps that is why there is none with sticker. Or maybe no one has added it
yet.
http://www.bricklink.com/catalogAdd.asp
Russell
|
Example:
|
And don't forget that Bricklink's policy is that this figured be catalogued
with the wrong part for the head.
|
What is the policy regarding the head for this figure and why? Thanks in advance
for your reply.
|
|
Author: | 62Bricks | Posted: | Apr 15, 2015 13:06 | Subject: | Re: Inventory Change Request for Minifig sp007 | Viewed: | 36 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, RobErNat writes:
| In Inventories Requests, viejos writes:
| In Inventories Requests, Sean_Stevens writes:
| Please make changes to the following inventory:
* Add 1 Minifig sp007 Classic Space - Yellow with Airtanks
Comments from Submitter:
I have a yellow classic space minifig with a stickered torso. I cannot see one listed
|
You'll need to add it to the catalog instead of submitting an inventory change
request. The catalog will only add minifigs that came officially in sets, so
perhaps that is why there is none with sticker. Or maybe no one has added it
yet.
http://www.bricklink.com/catalogAdd.asp
Russell
|
Example:
|
And don't forget that Bricklink's policy is that this figured be catalogued
with the wrong part for the head.
|
|
Author: | RobErNat | Posted: | Apr 15, 2015 12:06 | Subject: | Re: Inventory Change Request for Minifig sp007 | Viewed: | 31 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, viejos writes:
| In Inventories Requests, Sean_Stevens writes:
| Please make changes to the following inventory:
* Add 1 Minifig sp007 Classic Space - Yellow with Airtanks
Comments from Submitter:
I have a yellow classic space minifig with a stickered torso. I cannot see one listed
|
You'll need to add it to the catalog instead of submitting an inventory change
request. The catalog will only add minifigs that came officially in sets, so
perhaps that is why there is none with sticker. Or maybe no one has added it
yet.
http://www.bricklink.com/catalogAdd.asp
Russell
|
Example:
|
|
Author: | viejos | Posted: | Apr 15, 2015 12:03 | Subject: | Re: Inventory Change Request for Minifig sp007 | Viewed: | 33 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, Sean_Stevens writes:
| Please make changes to the following inventory:
* Add 1 Minifig sp007 Classic Space - Yellow with Airtanks
Comments from Submitter:
I have a yellow classic space minifig with a stickered torso. I cannot see one listed
|
You'll need to add it to the catalog instead of submitting an inventory change
request. The catalog will only add minifigs that came officially in sets, so
perhaps that is why there is none with sticker. Or maybe no one has added it
yet.
http://www.bricklink.com/catalogAdd.asp
Russell
|
|
Author: | Sean_Stevens | Posted: | Apr 15, 2015 11:40 | Subject: | Inventory Change Request for Minifig sp007 | Viewed: | 54 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Minifig sp007 Classic Space - Yellow with Airtanks
Comments from Submitter:
I have a yellow classic space minifig with a stickered torso. I cannot see one listed
|
|
Author: | viejos | Posted: | Apr 15, 2015 11:10 | Subject: | Re: Inventory Change Request for Set 8097-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, STEEL writes:
| Please make changes to the following inventory:
* Delete 5 Part 3001 Black Brick 2 x 4 (match ID 99)
Comments from Submitter:
There are MANY errors with this inventory...
The following parts are MISSING:
4x (3068) brick yellow 2x2 tiles
4x (2398) Dark Bluish Gray Roof Tile 2X3
4x (6111) Dark Bluish Gray 1x10 bricks
2x (2730) Light Bluish Gray Technic, Brick 1 x 10 with Holes
4x (4032) Dark Bluish Gray Plate 2X2 Round (inventory says 3 but there should be 7)
4x (4286) Light Bluish Gray Roof Tile 1X3 (inventory says 4 but there should be 8)
6x (2877) Dark Bluish Gray Profile Brick 1X2 (inventory says 12 but there should be 18)
2x (3020) Light Bluish Gray Plate 2X4 (inventory says 6 but there should be 8)
The following parts are WRONG:
2x (2465) Dark Bluish Gray 1x 16 bricks
6x (30363) Dark Bluish Gray Roof Tile 2X4X1
2x (3702) Light Bluish Gray Technic, Brick 1 x 8 with Holes
4x (3010) Light Bluish Gray Brick 1 x 4 (inventory says 10 but there should only be 6)
3x (61184) Light Bluish Gray 3 M.Arch W.Knob And Shaft ظ3.2 (inventory says 9 but there should only be 6)
2x (60477) Dark Bluish Gray Roof Tile 1X4X1 (Not required at all?)
6x (30363) Dark Bluish Gray Roof Tile 2X4X1, 18° (Not required at all?)
2x (3747) Dark Bluish Gray Roof Tile 2X3/25° Inv. (inventory says 4 but there should only be 2)
2x (42022) Dark Bluish Gray Brick 1X6 W/Bow (inventory says 4 but there should only be 2)
1x (3001) Black Brick 2X4 (inventory says 5 but there should only be 4)
|
Please read the note at the foot of the inventory. There are 2 versions of instructions
fo this set. For your version, substitute all the lines in the alternate section
with Match Number 99 with the lines in the Regular items section with Match Number
99.
Russell
|
|
Author: | happygolucky | Posted: | Apr 15, 2015 10:34 | Subject: | Inventory Change Request for Set 60085-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3009pb191L Black Brick 1 x 6 with Lime, Silver and White 'XTREME' Pattern Model Left Side (Sticker) - Set 60085 (Counterpart)
* Add 1 Part 3009pb191R Black Brick 1 x 6 with Lime, Silver and White 'XTREME' Pattern Model Right Side (Sticker) - Set 60085 (Counterpart)
* Add 1 Part 3008pb141L Black Brick 1 x 8 with White and Lime Arrows and 'U TRANS TRAILERS' Pattern Model Left Side (Sticker) - Set 60085 (Counterpart)
* Add 1 Part 3008pb141R Black Brick 1 x 8 with White and Lime Arrows and 'U TRANS TRAILERS' Pattern Model Right Side (Sticker) - Set 60085 (Counterpart)
* Add 1 Part 30602pb072 Black Slope, Curved 2 x 2 Lip, No Studs with Silver Grille, Lime Stripe and '875HP' Pattern (Sticker) - Set 80085 (Counterpart)
* Add 1 Part 15068pb021 Black Slope, Curved 2 x 2 No Studs with Lime, Silver and White 'XTREME' Pattern (Sticker) - Set 80085 (Counterpart)
* Add 1 Part 3069bpb370 Dark Bluish Gray Tile 1 x 2 with 'HK60085' Pattern (Sticker) - Set 60085 (Counterpart)
* Add 1 Part 3069bpb371 Dark Bluish Gray Tile 1 x 2 with 'MS60085' Pattern (Sticker) - Set 60085 (Counterpart)
* Add 1 Part 6636pb108L Black Tile 1 x 6 with Silver Vents and Lines Pattern Model Left Side (Sticker) - Set 80085 (Counterpart)
* Add 1 Part 6636pb108R Black Tile 1 x 6 with Silver Vents and Lines Pattern Model Right Side (Sticker) - Set 80085 (Counterpart)
* Add 1 Part 52031pb091 Orange Wedge 4 x 6 x 2/3 Triple Curved with Lime, Silver and White 'XTREME' Pattern (Sticker) - Set 60085 (Counterpart)
* Add 1 Part 52031pb090 Black Wedge 4 x 6 x 2/3 Triple Curved with Silver Emblem and Blue '21' on White Background in Blue Circle Pattern (Sticker) - Set 60085 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | calsbricks | Posted: | Apr 15, 2015 10:27 | Subject: | Inventory Change Request for Set 7671-1 | Viewed: | 20 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 3 Part 44375a Light Bluish Gray Dish 6 x 6 Inverted (Radar) - Hollow Studs (Alternate)
Comments from Submitter:
2 Sets parted out both had Hollow Stud 44375a's
|
|
Author: | STEEL | Posted: | Apr 15, 2015 09:22 | Subject: | Inventory Change Request for Set 8097-1 | Viewed: | 41 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 5 Part 3001 Black Brick 2 x 4 (match ID 99)
Comments from Submitter:
There are MANY errors with this inventory...
The following parts are MISSING:
4x (3068) brick yellow 2x2 tiles
4x (2398) Dark Bluish Gray Roof Tile 2X3
4x (6111) Dark Bluish Gray 1x10 bricks
2x (2730) Light Bluish Gray Technic, Brick 1 x 10 with Holes
4x (4032) Dark Bluish Gray Plate 2X2 Round (inventory says 3 but there should be 7)
4x (4286) Light Bluish Gray Roof Tile 1X3 (inventory says 4 but there should be 8)
6x (2877) Dark Bluish Gray Profile Brick 1X2 (inventory says 12 but there should be 18)
2x (3020) Light Bluish Gray Plate 2X4 (inventory says 6 but there should be 8)
The following parts are WRONG:
2x (2465) Dark Bluish Gray 1x 16 bricks
6x (30363) Dark Bluish Gray Roof Tile 2X4X1
2x (3702) Light Bluish Gray Technic, Brick 1 x 8 with Holes
4x (3010) Light Bluish Gray Brick 1 x 4 (inventory says 10 but there should only be 6)
3x (61184) Light Bluish Gray 3 M.Arch W.Knob And Shaft ظ3.2 (inventory says 9 but there should only be 6)
2x (60477) Dark Bluish Gray Roof Tile 1X4X1 (Not required at all?)
6x (30363) Dark Bluish Gray Roof Tile 2X4X1, 18° (Not required at all?)
2x (3747) Dark Bluish Gray Roof Tile 2X3/25° Inv. (inventory says 4 but there should only be 2)
2x (42022) Dark Bluish Gray Brick 1X6 W/Bow (inventory says 4 but there should only be 2)
1x (3001) Black Brick 2X4 (inventory says 5 but there should only be 4)
|
|
Author: | calsbricks | Posted: | Apr 15, 2015 08:59 | Subject: | Inventory Change Request for Set 30200-1 | Viewed: | 24 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 98313 Dark Bluish Gray Arm Mechanical, Exo-Force / Bionicle, Thick Support (Alternate)
Comments from Submitter:
9 sets parted out - all 98313's not 53989
|
|
Author: | happygolucky | Posted: | Apr 15, 2015 08:44 | Subject: | Inventory Change Request for Set 60085-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 92710c01pb02 Orange Boat Hull Unitary 28 x 8 Complete Assembly with Dark Bluish Gray Top with Blue '21' in White Circle Pattern on Both Sides (Stickers) - (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | happygolucky | Posted: | Apr 15, 2015 06:30 | Subject: | Inventory Change Request for Set 60074-1 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 892pb24 Light Bluish Gray Road Sign Clip-on 2 x 2 Triangle with Yellow Explosion Type 2 Pattern (Sticker) - Set 60076 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | happygolucky | Posted: | Apr 15, 2015 04:48 | Subject: | Inventory Change Request for Set 41062-1 | Viewed: | 35 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 33009pb048 Reddish Brown Minifig, Utensil Book 2 x 3 with Ice Castle Pattern (Sticker) - Set 41062 (Counterpart)
* Add 1 Part 87421pb029 White Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Snowflakes on Outside and Scarf and Gloves on Inside Pattern (Sticker) - Set 4106 (Counterpart)
* Add 1 Part 87421pb030 White Panel 3 x 3 x 6 Corner Wall without Bottom Indentations with Snowflakes on Outside and Sundaes and Cupcake on Inside Pattern (Sticker) - Set 4 (Counterpart)
* Add 1 Part 87079pb211 Magenta Tile 2 x 4 with Snowflake on Light Aqua Background Pattern (Sticker) - Set 41062 (Counterpart)
* Add 2 Part 14769pb044 Medium Lavender Tile, Round 2 x 2 with Bottom Stud Holder with Lavender Cushion with Magenta Button and Silver Hearts and Trim Pattern (Sticker) - Set 41062 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
Author: | viejos | Posted: | Apr 14, 2015 22:25 | Subject: | Inventory Change Request for Set 686-1 | Viewed: | 41 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Yellow {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
|
Author: | viejos | Posted: | Apr 14, 2015 22:24 | Subject: | Inventory Change Request for Set 450-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Yellow {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
|
Author: | viejos | Posted: | Apr 14, 2015 22:24 | Subject: | Inventory Change Request for Set 312-3 | Viewed: | 23 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
* Change 6 Part Yellow {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
|
Author: | viejos | Posted: | Apr 14, 2015 22:21 | Subject: | Inventory Change Request for Set 560-2 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Blue {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
|
Author: | viejos | Posted: | Apr 14, 2015 22:20 | Subject: | Inventory Change Request for Set 545-2 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
* Change 1 Part Blue {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
|
Author: | viejos | Posted: | Apr 14, 2015 22:19 | Subject: | Inventory Change Request for Set 932-1 | Viewed: | 17 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 6 Part Blue {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
* Change 6 Part Yellow {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
|
|
Author: | viejos | Posted: | Apr 14, 2015 22:17 | Subject: | Inventory Change Request for Set 383-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
* Change 1 Part Trans-Clear {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
* Change 1 Part Yellow {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
|
|
Author: | viejos | Posted: | Apr 14, 2015 22:16 | Subject: | Inventory Change Request for Set 730-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part Black {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
* Change 1 Part Trans-Clear {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
* Change 1 Part Yellow {3003 Brick 2 x 2 to 3003old Brick 2 x 2 without Inside Supports}
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|