Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Brick.Door  | | Posted: | Sep 23, 2014 10:33 | | Subject: | Re: Cap on number of message i can send | | Viewed: | 64 times | | Topic: | Suggestions | |
|
| In Suggestions, StarBrick writes:
| | there's a 4 -letter word in his username that is quite odd too 
|
If you're giggling at that I have to ask how old are YOU?
also
|
| Author: | StarBrick | | Posted: | Sep 23, 2014 09:02 | | Subject: | Re: Cap on number of message i can send | | Viewed: | 77 times | | Topic: | Suggestions | |
|
| | there's a 4 -letter word in his username that is quite odd too |
| Author: | maxlego | | Posted: | Sep 23, 2014 08:47 | | Subject: | Inventory Change Request for Set 9348-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 11 Part 3626bpb628 Yellow Minifig, Head Black Eyebrows, Thin Grin, Black Eyes with White Pupils Pattern (Alternate)
Comments from Submitter:
It seems the male minifigs may have this head with 'black' eyebrows instead of the currently listed head with 'brown' eyebrows. So listed as an alternate.
|
 |
| Author: | bb513777 | | Posted: | Sep 23, 2014 08:20 | | Subject: | Cap on number of message i can send | | Viewed: | 169 times | | Topic: | Suggestions | | Status: | Discarded | |
|
| Sorry, i might have already posted this in some other thread, but why is there
a limit on the number of messages i can sell?
Sending out a message is the one way to try and arrive at an approximate total
cost of the item to be shipped.
i think its quite weird.
|
|
| Author: | 211eric | | Posted: | Sep 22, 2014 21:35 | | Subject: | Inventory Change Request for Set 75044-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 59230 Tan Arm Mechanical, Straight with Clips at 90 degrees (Vertical Grip) (Extra)
* Add 1 Part 30377 Tan Arm Mechanical, Battle Droid (Extra)
* Add 1 Part 64567 Black Minifig, Weapon Lightsaber Hilt Straight (Extra)
* Add 1 Part 61482 Light Bluish Gray Minifig, Utensil Handcuffs (Extra)
* Add 1 Part 3024 Trans-Red Plate 1 x 1 (Extra)
* Add 1 Part 3024 Dark Blue Plate 1 x 1 (Extra)
* Add 1 Part 54200 Trans-Red Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 54200 Dark Blue Slope 30 1 x 1 x 2/3 (Extra)
* Add 1 Part 4032 Black Plate, Round 2 x 2 with Axle Hole (Extra)
* Add 1 Part 4592c02 Light Bluish Gray Lever Small Base with Black Lever (Extra)
* Add 1 Part 4073 Trans-Neon Orange Plate, Round 1 x 1 Straight Side (Extra)
|
|
| Author: | Trejean | | Posted: | Sep 22, 2014 20:57 | | Subject: | Inventory Change Request for Set 10225-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 12939 White Brick, Arch 1 x 6 x 2 - Thin Top without Reinforced Underside (Alternate) (match ID 3)
* Add 4 Part 10928 Dark Bluish Gray Technic, Gear 8 Tooth Type 2 (Alternate) (match ID 4)
* Change 2 Part White 3307 Brick, Arch 1 x 6 x 2 - Thick Top with Reinforced Underside {match ID 0 to 3}
* Change 4 Part Dark Bluish Gray 3647 Technic, Gear 8 Tooth Type 1 {match ID 0 to 4}
Comments from Submitter:
verified in sealed sets
|
|
| Author: | BLUSER_516094 | | Posted: | Sep 22, 2014 19:25 | | Subject: | Re: Cart Suggestion | | Viewed: | 48 times | | Topic: | Suggestions | |
|
| In Suggestions, RobErNat writes:
| | In Suggestions, Neo_ writes:
| | How is that not a good system? It's all on one site. Look; there would be
problen if one seller HAD ALL THE ITEMS I'd desire, and quantity, but hell.
That's a miracle.
eBay does it perfectly. Do I want BL to be a LEGO eBay? No.
|
Don't see what one thing has to do with another.
Ebay allows to pay sellers 'in one shot', but you're still paying
each seller individually in reality (check your PP overview, or creditcard overview),
just in the same way you pay each seller here individually (but one by one, based
on the invoice each seller sends).
I never used the 'bulk' payment Ebay offers, I've always switched
to pay sellers one by one, as it allows me to keep control rather then to be
lazy...
night night
|
You just pointed out the flaw. There is no choice of separate payment type or
a bulk payment that divides to each sellers total.
|
|
| Author: | RobErNat | | Posted: | Sep 22, 2014 18:05 | | Subject: | Re: Cart Suggestion | | Viewed: | 39 times | | Topic: | Suggestions | |
|
| In Suggestions, Neo_ writes:
| | How is that not a good system? It's all on one site. Look; there would be
problen if one seller HAD ALL THE ITEMS I'd desire, and quantity, but hell.
That's a miracle.
eBay does it perfectly. Do I want BL to be a LEGO eBay? No.
|
Don't see what one thing has to do with another.
Ebay allows to pay sellers 'in one shot', but you're still paying
each seller individually in reality (check your PP overview, or creditcard overview),
just in the same way you pay each seller here individually (but one by one, based
on the invoice each seller sends).
I never used the 'bulk' payment Ebay offers, I've always switched
to pay sellers one by one, as it allows me to keep control rather then to be
lazy...
night night
|
|
| Author: | BLUSER_516094 | | Posted: | Sep 22, 2014 17:54 | | Subject: | Re: Cart Suggestion | | Viewed: | 30 times | | Topic: | Suggestions | |
|
| In Suggestions, CoachMcGuirk writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, CoachMcGuirk writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, CoachMcGuirk writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
So, you want bricklink to behave like eBay so you don't have to pay everyone
individually?
I wonder what it is recently with people coming here and wanting it to behave
like something else when that something else already exists.
Since you have 0 feedback, maybe just try accepting the way it is at this moment
and see if something is needed rather than trying to change something
|
Why come down on a new member who essentially is making the exact same suggestion
that a member who has been around for three years made 2 days ago?
http://www.bricklink.com/message.asp?ID=855571
It is possible this new member was simply trying to help and there is no membership
length criteria for making suggestions. If new members never could place orders
but also could never make suggestions to help themselves, no one would get sales.
I'd say this new member's perspective strengthens the argument for auto-check
out. New member(s) used to something else are confused by BrickLink's non
standard system of online commerce. Confusion has the potential to lead to loss
of sales/revenue.
|
They aren't actually talking about automated checkout.
They are talking about buying from x stores, logging into paypal, making one
payment or one batch of payments to pay for all of their orders.
It's integration with PayPal.
|
That wasn't my understanding of the suggestion. He said a global cart with
individual shops under there - I don't think he is advocating for paying
only one individual for items from multiple shops.
|
He said "It's too hard to keep track of 30 different stores AND
pay separately."
in other words, keeping track of 30 different stores AND paying for them separately
is too hard.
In his comment back to me, he said 'Doesn't change having to pay separately.'
His issue seems to be having to pay them separately.
Seller 1 sends him an invoice, seller 2, seller 3... .seller 30
He wants to pay them all at the same time.
Not necessarily in one payment, but let's call it a payment batch.
Now, if seller 30 doesn't send an invoice for 4 days, possibly to pay them
all at one time, he would wait.
| |
| |
eBay only had that happen with PayPal after they bought them.
And why come down on them for it?
Would you go into a restaurant and tell the chef what to do with soup without
ever orderering it first?
|
No, but if he served me soup on a plate with only a knife to eat it with, I sure
would suggest he try a bowl and a spoon next time.
|
(sarcastically) try to order the soup then. 
This is a new user who created a profile on September 20th, asked the question
on the 21st, so again, did the OP 'try' to order from 30 stores and was
confused, or is simply a suggestion without trying first really worth merit.
| |
| |
Sure, anyone can make a suggestion, but the same kind of suggestions that changes
a task from 2 clicks to 1 click, I also will comment negatively on.
|
Negatively on the suggestion, sure. Negatively on the individual suggesting it,
I wouldn't but I suppose you are within your rights to do so.
|
| |
| | How often would this be needed?
Is the current process to onerous?
|
Yes, the current process is more onerous than standard online commerce websites.
|
If you ordered from 5 stores, 2 that only accepted IBAN, 2 that were fine with
paypal and one lives next door to you and you were going to pay cash, how would
you handle it.
I can buy things off of walmart, target and TRU, all intending to use paypal,
but I still have to log into each site, place the order and pay for them separately.
I've made BIN's on ebay that doesn't give me the option to pay for
other purchases at the same time, I can't commit to buying it unless I do
so right now.
| |
| | Do mistakes happen that this process will correct or circumvent?
I get automated check out. That's not the same thing.
|
|
|
My mistake then, I didn't think he meant to pay with only one transaction
for multiple stores. I don't think that would be a good system here or anywhere
that I can think of. Sorry for my mistake and subsequent thoughts on that mistake.
I don't know if he placed an order, but I thought I say a previous thread
he started trying to get help placing an order. so I do think if he had trouble
placing an order that it is legitimate that he make a suggestion that he thinks
may help others who may also be confused.
Sorry again for my misunderstanding.
|
How is that not a good system? It's all on one site. Look; there would be
problen if one seller HAD ALL THE ITEMS I'd desire, and quantity, but hell.
That's a miracle.
eBay does it perfectly. Do I want BL to be a LEGO eBay? No.
|
|
| Author: | Brettj666 | | Posted: | Sep 22, 2014 13:27 | | Subject: | Re: Cart Suggestion | | Viewed: | 31 times | | Topic: | Suggestions | |
|
| In Suggestions, CoachMcGuirk writes:
| | My mistake then, I didn't think he meant to pay with only one transaction
for multiple stores. I don't think that would be a good system here or anywhere
that I can think of. Sorry for my mistake and subsequent thoughts on that mistake.
I don't know if he placed an order, but I thought I say a previous thread
he started trying to get help placing an order. so I do think if he had trouble
placing an order that it is legitimate that he make a suggestion that he thinks
may help others who may also be confused.
Sorry again for my misunderstanding.
|
No worries at all, sometimes suggestions flow into one another.
For the one you linked to (with a similar suggestion), he had 300+ feedback,
so he at least got to experience the site before making his suggestion.
If this user has gone through many transactions, then it's under another
ID and we all know that's against the TOS and no one would break that
|
|
| Author: | CoachMcGuirk | | Posted: | Sep 22, 2014 13:13 | | Subject: | Re: Cart Suggestion | | Viewed: | 40 times | | Topic: | Suggestions | |
|
| In Suggestions, Brettj666 writes:
| | In Suggestions, CoachMcGuirk writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, CoachMcGuirk writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
So, you want bricklink to behave like eBay so you don't have to pay everyone
individually?
I wonder what it is recently with people coming here and wanting it to behave
like something else when that something else already exists.
Since you have 0 feedback, maybe just try accepting the way it is at this moment
and see if something is needed rather than trying to change something
|
Why come down on a new member who essentially is making the exact same suggestion
that a member who has been around for three years made 2 days ago?
http://www.bricklink.com/message.asp?ID=855571
It is possible this new member was simply trying to help and there is no membership
length criteria for making suggestions. If new members never could place orders
but also could never make suggestions to help themselves, no one would get sales.
I'd say this new member's perspective strengthens the argument for auto-check
out. New member(s) used to something else are confused by BrickLink's non
standard system of online commerce. Confusion has the potential to lead to loss
of sales/revenue.
|
They aren't actually talking about automated checkout.
They are talking about buying from x stores, logging into paypal, making one
payment or one batch of payments to pay for all of their orders.
It's integration with PayPal.
|
That wasn't my understanding of the suggestion. He said a global cart with
individual shops under there - I don't think he is advocating for paying
only one individual for items from multiple shops.
|
He said "It's too hard to keep track of 30 different stores AND
pay separately."
in other words, keeping track of 30 different stores AND paying for them separately
is too hard.
In his comment back to me, he said 'Doesn't change having to pay separately.'
His issue seems to be having to pay them separately.
Seller 1 sends him an invoice, seller 2, seller 3... .seller 30
He wants to pay them all at the same time.
Not necessarily in one payment, but let's call it a payment batch.
Now, if seller 30 doesn't send an invoice for 4 days, possibly to pay them
all at one time, he would wait.
| |
| |
eBay only had that happen with PayPal after they bought them.
And why come down on them for it?
Would you go into a restaurant and tell the chef what to do with soup without
ever orderering it first?
|
No, but if he served me soup on a plate with only a knife to eat it with, I sure
would suggest he try a bowl and a spoon next time.
|
(sarcastically) try to order the soup then.
This is a new user who created a profile on September 20th, asked the question
on the 21st, so again, did the OP 'try' to order from 30 stores and was
confused, or is simply a suggestion without trying first really worth merit.
| |
| |
Sure, anyone can make a suggestion, but the same kind of suggestions that changes
a task from 2 clicks to 1 click, I also will comment negatively on.
|
Negatively on the suggestion, sure. Negatively on the individual suggesting it,
I wouldn't but I suppose you are within your rights to do so.
|
| |
| | How often would this be needed?
Is the current process to onerous?
|
Yes, the current process is more onerous than standard online commerce websites.
|
If you ordered from 5 stores, 2 that only accepted IBAN, 2 that were fine with
paypal and one lives next door to you and you were going to pay cash, how would
you handle it.
I can buy things off of walmart, target and TRU, all intending to use paypal,
but I still have to log into each site, place the order and pay for them separately.
I've made BIN's on ebay that doesn't give me the option to pay for
other purchases at the same time, I can't commit to buying it unless I do
so right now.
| |
| | Do mistakes happen that this process will correct or circumvent?
I get automated check out. That's not the same thing.
|
|
|
My mistake then, I didn't think he meant to pay with only one transaction
for multiple stores. I don't think that would be a good system here or anywhere
that I can think of. Sorry for my mistake and subsequent thoughts on that mistake.
I don't know if he placed an order, but I thought I say a previous thread
he started trying to get help placing an order. so I do think if he had trouble
placing an order that it is legitimate that he make a suggestion that he thinks
may help others who may also be confused.
Sorry again for my misunderstanding.
|
|
| Author: | Brettj666 | | Posted: | Sep 22, 2014 13:05 | | Subject: | Re: Cart Suggestion | | Viewed: | 37 times | | Topic: | Suggestions | |
|
| In Suggestions, CoachMcGuirk writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, CoachMcGuirk writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
So, you want bricklink to behave like eBay so you don't have to pay everyone
individually?
I wonder what it is recently with people coming here and wanting it to behave
like something else when that something else already exists.
Since you have 0 feedback, maybe just try accepting the way it is at this moment
and see if something is needed rather than trying to change something
|
Why come down on a new member who essentially is making the exact same suggestion
that a member who has been around for three years made 2 days ago?
http://www.bricklink.com/message.asp?ID=855571
It is possible this new member was simply trying to help and there is no membership
length criteria for making suggestions. If new members never could place orders
but also could never make suggestions to help themselves, no one would get sales.
I'd say this new member's perspective strengthens the argument for auto-check
out. New member(s) used to something else are confused by BrickLink's non
standard system of online commerce. Confusion has the potential to lead to loss
of sales/revenue.
|
They aren't actually talking about automated checkout.
They are talking about buying from x stores, logging into paypal, making one
payment or one batch of payments to pay for all of their orders.
It's integration with PayPal.
|
That wasn't my understanding of the suggestion. He said a global cart with
individual shops under there - I don't think he is advocating for paying
only one individual for items from multiple shops.
|
He said "It's too hard to keep track of 30 different stores AND
pay separately."
in other words, keeping track of 30 different stores AND paying for them separately
is too hard.
In his comment back to me, he said 'Doesn't change having to pay separately.'
His issue seems to be having to pay them separately.
Seller 1 sends him an invoice, seller 2, seller 3... .seller 30
He wants to pay them all at the same time.
Not necessarily in one payment, but let's call it a payment batch.
Now, if seller 30 doesn't send an invoice for 4 days, possibly to pay them
all at one time, he would wait.
| |
| |
eBay only had that happen with PayPal after they bought them.
And why come down on them for it?
Would you go into a restaurant and tell the chef what to do with soup without
ever orderering it first?
|
No, but if he served me soup on a plate with only a knife to eat it with, I sure
would suggest he try a bowl and a spoon next time.
|
(sarcastically) try to order the soup then.
This is a new user who created a profile on September 20th, asked the question
on the 21st, so again, did the OP 'try' to order from 30 stores and was
confused, or is simply a suggestion without trying first really worth merit.
| |
| |
Sure, anyone can make a suggestion, but the same kind of suggestions that changes
a task from 2 clicks to 1 click, I also will comment negatively on.
|
Negatively on the suggestion, sure. Negatively on the individual suggesting it,
I wouldn't but I suppose you are within your rights to do so.
|
| |
| | How often would this be needed?
Is the current process to onerous?
|
Yes, the current process is more onerous than standard online commerce websites.
|
If you ordered from 5 stores, 2 that only accepted IBAN, 2 that were fine with
paypal and one lives next door to you and you were going to pay cash, how would
you handle it.
I can buy things off of walmart, target and TRU, all intending to use paypal,
but I still have to log into each site, place the order and pay for them separately.
I've made BIN's on ebay that doesn't give me the option to pay for
other purchases at the same time, I can't commit to buying it unless I do
so right now.
| |
| | Do mistakes happen that this process will correct or circumvent?
I get automated check out. That's not the same thing.
|
|
|
|
| Author: | CoachMcGuirk | | Posted: | Sep 22, 2014 12:29 | | Subject: | Re: Cart Suggestion | | Viewed: | 39 times | | Topic: | Suggestions | |
|
| In Suggestions, Brettj666 writes:
| | In Suggestions, CoachMcGuirk writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
So, you want bricklink to behave like eBay so you don't have to pay everyone
individually?
I wonder what it is recently with people coming here and wanting it to behave
like something else when that something else already exists.
Since you have 0 feedback, maybe just try accepting the way it is at this moment
and see if something is needed rather than trying to change something
|
Why come down on a new member who essentially is making the exact same suggestion
that a member who has been around for three years made 2 days ago?
http://www.bricklink.com/message.asp?ID=855571
It is possible this new member was simply trying to help and there is no membership
length criteria for making suggestions. If new members never could place orders
but also could never make suggestions to help themselves, no one would get sales.
I'd say this new member's perspective strengthens the argument for auto-check
out. New member(s) used to something else are confused by BrickLink's non
standard system of online commerce. Confusion has the potential to lead to loss
of sales/revenue.
|
They aren't actually talking about automated checkout.
They are talking about buying from x stores, logging into paypal, making one
payment or one batch of payments to pay for all of their orders.
It's integration with PayPal.
|
That wasn't my understanding of the suggestion. He said a global cart with
individual shops under there - I don't think he is advocating for paying
only one individual for items from multiple shops.
| |
eBay only had that happen with PayPal after they bought them.
And why come down on them for it?
Would you go into a restaurant and tell the chef what to do with soup without
ever orderering it first?
|
No, but if he served me soup on a plate with only a knife to eat it with, I sure
would suggest he try a bowl and a spoon next time.
| |
Sure, anyone can make a suggestion, but the same kind of suggestions that changes
a task from 2 clicks to 1 click, I also will comment negatively on.
|
Negatively on the suggestion, sure. Negatively on the individual suggesting it,
I wouldn't but I suppose you are within your rights to do so.
| | How often would this be needed?
Is the current process to onerous?
|
Yes, the current process is more onerous than standard online commerce websites.
| | Do mistakes happen that this process will correct or circumvent?
I get automated check out. That's not the same thing.
|
|
|
| Author: | stecre | | Posted: | Sep 22, 2014 11:36 | | Subject: | Inventory Change Request for Gear 50011 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory: [G=50011]
* Add 3 Part 2453b Light Bluish Gray Brick 1 x 1 x 5 - Solid Stud (Alternate) (match ID 1)
* Change 3 Part Light Bluish Gray 2453 Brick 1 x 1 x 5 {match ID 0 to 1}
Comments from Submitter:
Alternate found in sealed sets
|
|
| Author: | BLUSER_275369 | | Posted: | Sep 22, 2014 08:36 | | Subject: | Re: Cart Suggestion | | Viewed: | 48 times | | Topic: | Suggestions | |
|
| In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
The reason is that there are 30 different stores buy different owners. See it
like shopping at a mall as compared to shopping at Walmart. At Walmart you buy
everything you need and pay at one checkout. However if you go to the mall, make
purchases in many little stores there you don't expect to pay for all of
the goods at one universal checkout do you?
|
|
| Author: | Brettj666 | | Posted: | Sep 22, 2014 06:12 | | Subject: | Re: Cart Suggestion | | Viewed: | 46 times | | Topic: | Suggestions | |
|
| In Suggestions, CoachMcGuirk writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
So, you want bricklink to behave like eBay so you don't have to pay everyone
individually?
I wonder what it is recently with people coming here and wanting it to behave
like something else when that something else already exists.
Since you have 0 feedback, maybe just try accepting the way it is at this moment
and see if something is needed rather than trying to change something
|
Why come down on a new member who essentially is making the exact same suggestion
that a member who has been around for three years made 2 days ago?
http://www.bricklink.com/message.asp?ID=855571
It is possible this new member was simply trying to help and there is no membership
length criteria for making suggestions. If new members never could place orders
but also could never make suggestions to help themselves, no one would get sales.
I'd say this new member's perspective strengthens the argument for auto-check
out. New member(s) used to something else are confused by BrickLink's non
standard system of online commerce. Confusion has the potential to lead to loss
of sales/revenue.
|
They aren't actually talking about automated checkout.
They are talking about buying from x stores, logging into paypal, making one
payment or one batch of payments to pay for all of their orders.
It's integration with PayPal.
eBay only had that happen with PayPal after they bought them.
And why come down on them for it?
Would you go into a restaurant and tell the chef what to do with soup without
ever orderering it first?
Sure, anyone can make a suggestion, but the same kind of suggestions that changes
a task from 2 clicks to 1 click, I also will comment negatively on.
How often would this be needed?
Is the current process to onerous?
Do mistakes happen that this process will correct or circumvent?
I get automated check out. That's not the same thing.
|
|
| Author: | happygolucky | | Posted: | Sep 22, 2014 04:49 | | Subject: | Inventory Change Request for Set 8109-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 41239pb03 Black Technic, Liftarm 1 x 13 Thick with Lego Technic Logo Pattern (Sticker) - Set 8109 (Counterpart)
Comments from Submitter:
Adding stickered counterpart to inventory. Thank you.
|
|
| Author: | elias3 | | Posted: | Sep 22, 2014 04:45 | | Subject: | Re: Inventory Change Request for Set 75056-16 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, viejos writes:
| | In Inventories Requests, jennnifer writes:
| | | |
Judging from all of your requests, it's probably better if you actually change
the item itself, instad of have an alternate. (Since it seemed as if the original
submitter did not take variants of this type into consideration.)
|
Hello,
I am sorry, but I was very careful with these variants when entering the inventory
for this set. I am not surprised either that the sets found in Europe differ
slightly then the version I opened here in the U.S. I have observed a similar
pattern for many sets recently. I realize that there are many times when it seems
that variants for items are not verified correctly, but this is not one of them.
Thank you!
Jen
|
I agree about this part. I just confirmed this inventory:
and it had the grooved type of orange jumpers (with solid pin):
The white ones were these, right in the same set:
Russell
|
Hello all
no, I opened a few new sets and found for some colors also the -b version, it's
again a mix from both
please keep the request!
Stefaan
|
|
| Author: | happygolucky | | Posted: | Sep 22, 2014 04:40 | | Subject: | Inventory Change Request for Set 42023-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3068bpb882 Dark Bluish Gray Tile 2 x 2 with Black Vent on Dark Bluish Gray Background Pattern (Sticker) - Set 42023 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
| Author: | bb473686 | | Posted: | Sep 22, 2014 01:17 | | Subject: | Inventory Change Request for Set 70160-1 | | Viewed: | 45 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 4085b Light Bluish Gray Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (Alternate)
Comments from Submitter:
Just parted 2x this set, had 4x type 4 (as in inv.) and 4x type 2. (thin U)
|
|
| Author: | CoachMcGuirk | | Posted: | Sep 21, 2014 23:44 | | Subject: | Re: Cart Suggestion | | Viewed: | 54 times | | Topic: | Suggestions | |
|
| In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
So, you want bricklink to behave like eBay so you don't have to pay everyone
individually?
I wonder what it is recently with people coming here and wanting it to behave
like something else when that something else already exists.
Since you have 0 feedback, maybe just try accepting the way it is at this moment
and see if something is needed rather than trying to change something
|
Why come down on a new member who essentially is making the exact same suggestion
that a member who has been around for three years made 2 days ago?
http://www.bricklink.com/message.asp?ID=855571
It is possible this new member was simply trying to help and there is no membership
length criteria for making suggestions. If new members never could place orders
but also could never make suggestions to help themselves, no one would get sales.
I'd say this new member's perspective strengthens the argument for auto-check
out. New member(s) used to something else are confused by BrickLink's non
standard system of online commerce. Confusion has the potential to lead to loss
of sales/revenue.
|
|
| Author: | BLUSER_424058 | | Posted: | Sep 21, 2014 23:37 | | Subject: | Re: Cart Suggestion | | Viewed: | 53 times | | Topic: | Suggestions | |
|
| In Suggestions, viejos writes:
| | In Suggestions, Inventrious writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
So, you want bricklink to behave like eBay so you don't have to pay everyone
individually?
I wonder what it is recently with people coming here and wanting it to behave
like something else when that something else already exists.
Since you have 0 feedback, maybe just try accepting the way it is at this moment
and see if something is needed rather than trying to change something
|
I guess these guys are just used to eBay... it'll take them a fee orders
to get setttled here.
|
A "fee" orders when using "eBay" in the same sentence. Sounds like a Freudian
slip!
|
I mean't a "few" lol.
|
|
| Author: | viejos | | Posted: | Sep 21, 2014 23:34 | | Subject: | Re: Cart Suggestion | | Viewed: | 56 times | | Topic: | Suggestions | |
|
| In Suggestions, Inventrious writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
So, you want bricklink to behave like eBay so you don't have to pay everyone
individually?
I wonder what it is recently with people coming here and wanting it to behave
like something else when that something else already exists.
Since you have 0 feedback, maybe just try accepting the way it is at this moment
and see if something is needed rather than trying to change something
|
I guess these guys are just used to eBay... it'll take them a fee orders
to get setttled here.
|
A "fee" orders when using "eBay" in the same sentence. Sounds like a Freudian
slip!
|
|
| Author: | BLUSER_424058 | | Posted: | Sep 21, 2014 23:32 | | Subject: | Re: Cart Suggestion | | Viewed: | 41 times | | Topic: | Suggestions | |
|
| In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
So, you want bricklink to behave like eBay so you don't have to pay everyone
individually?
I wonder what it is recently with people coming here and wanting it to behave
like something else when that something else already exists.
Since you have 0 feedback, maybe just try accepting the way it is at this moment
and see if something is needed rather than trying to change something
|
I guess these guys are just used to eBay... it'll take them a fee orders
to get setttled here.
|
|
| Author: | Brettj666 | | Posted: | Sep 21, 2014 23:28 | | Subject: | Re: Cart Suggestion | | Viewed: | 51 times | | Topic: | Suggestions | |
|
| In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
So, you want bricklink to behave like eBay so you don't have to pay everyone
individually?
I wonder what it is recently with people coming here and wanting it to behave
like something else when that something else already exists.
Since you have 0 feedback, maybe just try accepting the way it is at this moment
and see if something is needed rather than trying to change something
|
|
| Author: | viejos | | Posted: | Sep 21, 2014 23:28 | | Subject: | Re: Inventory Change Request for Set 75056-16 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, jennnifer writes:
| | | |
Judging from all of your requests, it's probably better if you actually change
the item itself, instad of have an alternate. (Since it seemed as if the original
submitter did not take variants of this type into consideration.)
|
Hello,
I am sorry, but I was very careful with these variants when entering the inventory
for this set. I am not surprised either that the sets found in Europe differ
slightly then the version I opened here in the U.S. I have observed a similar
pattern for many sets recently. I realize that there are many times when it seems
that variants for items are not verified correctly, but this is not one of them.
Thank you!
Jen
|
I agree about this part. I just confirmed this inventory:
and it had the grooved type of orange jumpers (with solid pin):
The white ones were these, right in the same set:
Russell
|
|
| Author: | BLUSER_424058 | | Posted: | Sep 21, 2014 23:13 | | Subject: | Re: Cart Suggestion | | Viewed: | 52 times | | Topic: | Suggestions | |
|
| In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
These are multiple sellers, and you pay after an invoice, not automatically.
|
|
| Author: | starbeanie | | Posted: | Sep 21, 2014 23:05 | | Subject: | Re: Cart Suggestion | | Viewed: | 62 times | | Topic: | Suggestions | |
|
| In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
Except you can only pay after you have received an invoice from the seller.
|
|
| Author: | BLUSER_516094 | | Posted: | Sep 21, 2014 23:02 | | Subject: | Re: Cart Suggestion | | Viewed: | 66 times | | Topic: | Suggestions | |
|
| In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
| Author: | Brettj666 | | Posted: | Sep 21, 2014 22:32 | | Subject: | Re: Cart Suggestion | | Viewed: | 62 times | | Topic: | Suggestions | |
|
| In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
| Author: | BLUSER_516094 | | Posted: | Sep 21, 2014 22:27 | | Subject: | Cart Suggestion | | Viewed: | 209 times | | Topic: | Suggestions | | Status: | Implemented | |
|
| Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
|
| Author: | jennnifer | | Posted: | Sep 21, 2014 22:08 | | Subject: | Re: Inventory Change Request for Set 75056-16 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
|
| | |
Judging from all of your requests, it's probably better if you actually change
the item itself, instad of have an alternate. (Since it seemed as if the original
submitter did not take variants of this type into consideration.)
|
Hello,
I am sorry, but I was very careful with these variants when entering the inventory
for this set. I am not surprised either that the sets found in Europe differ
slightly then the version I opened here in the U.S. I have observed a similar
pattern for many sets recently. I realize that there are many times when it seems
that variants for items are not verified correctly, but this is not one of them.
Thank you!
Jen
|
|
| Author: | LordSkylark | | Posted: | Sep 21, 2014 21:31 | | Subject: | Re: Inventory Change Request for Set 75056-16 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| | Please make changes to the following inventory:
* Add 1 Part 3794 Orange Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Orange 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
Judging from all of your requests, it's probably better if you actually change
the item itself, instad of have an alternate. (Since it seemed as if the original
submitter did not take variants of this type into consideration.)
|
|
| Author: | QCBricks | | Posted: | Sep 21, 2014 18:34 | | Subject: | Inventory Change Request for Set 76005-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15332 Black Fence Spindled 1 x 4 x 2 with 4 Studs (Alternate) (match ID 8)
* Change 2 Part Black 30055 Fence Spindled 1 x 4 x 2 with 2 Studs {match ID 0 to 8}
Comments from Submitter:
Verified from several sealed sets
|
|
| Author: | happygolucky | | Posted: | Sep 21, 2014 15:41 | | Subject: | Inventory Change Request for Set 70725-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 44676pb016 Tan Flag 2 x 2 Trapezoid with Black Phoenix on Gold Background Pattern on Both Sides (Stickers) - Set 70725 (Counterpart)
* Add 2 Part x1435pb010 Light Bluish Gray Flag 5 x 6 Hexagonal with Mechanical Hinge Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 2431pb354R White Tile 1 x 4 with Black Stripe, Gold Air Intake and Spatters Pattern Model Right Side (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 2431pb354L White Tile 1 x 4 with Black Stripe, Red Asian Characters, Gold Air Intake and Spatters Pattern Model Left Side (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 3068bpb881 Dark Bluish Gray Tile 2 x 2 with 'AA' on Screen, Red and White Buttons, 'K 35', Lever and Arrows Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 3068bpb880 Dark Bluish Gray Tile 2 x 2 with Screen with '38 2138' and 4 Red Buttons Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 87079pb189 Black Tile 2 x 4 with Control Panel with Saw Blade and 'LOCK' Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 87079pb188 Dark Bluish Gray Tile 2 x 4 with Red and Black MechDragon Tongue Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 43712pb045 Dark Bluish Gray Wedge 6 x 4 Triple Curved with Riveted Metal Plates, Air Vent and Red Electricity Danger Sign Pattern (Stickers) - Set 70725 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
| Author: | john007 | | Posted: | Sep 21, 2014 12:24 | | Subject: | Inventory Change Request for Set 42029-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 6558 Blue Technic, Pin Long with Friction Ridges Lengthwise (Extra)
* Delete 1 Part 11214 Dark Bluish Gray Technic, Axle Pin 3L with Friction Ridges Lengthwise (Extra)
* Delete 1 Part 58176 White Light Cover with Internal Bar / Bionicle Barraki Eye (Extra)
* Add 1 Part 6589 Tan Technic, Gear 12 Tooth Bevel (Extra)
* Change {3 to 1} Part Red 3713 Technic Bush (Extra)
Comments from Submitter:
Extra pieces available just after building the A model, was a sealed set bought 1 month ago
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 10:27 | | Subject: | Inventory Change Request for Set 40083-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 13971c01 Light Bluish Gray Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring with Black Tire Offset Tread - Band Around Center of Tread (13971 / 61254) (Counterpart)
* Add 4 Part 13971 Light Bluish Gray Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring (Alternate) (match ID 2)
* Change 4 Part Light Bluish Gray 56902 Wheel 18mm D. x 8mm with Fake Bolts and Shallow Spokes {match ID 0 to 2}
Comments from Submitter:
found the 13971 type in my set
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 07:21 | | Subject: | Inventory Change Request for Set 75056-16 | | Viewed: | 41 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Orange Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Orange 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:35 | | Subject: | Inventory Change Request for Set 75056-20 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Red 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:35 | | Subject: | Inventory Change Request for Set 75056-18 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Dark Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Add 1 Part 553c Light Bluish Gray Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 2)
* Change 1 Part Dark Bluish Gray 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
* Change 1 Part Light Bluish Gray 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 2}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
and for the 553 the -c type
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:34 | | Subject: | Inventory Change Request for Set 75056-10 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Dark Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:34 | | Subject: | Inventory Change Request for Set 75056-7 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Blue Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Blue 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:34 | | Subject: | Inventory Change Request for Set 75056-2 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3794 Dark Blue Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 2 Part Dark Blue 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 20, 2014 13:08 | | Subject: | Re: Inventory Change Request for Set 41016-15 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, dmaster.hu writes:
| | Please make changes to the following inventory:
* Delete 1 Part 4589b White Cone 1 x 1 with Top Groove (Extra)
* Change {1 to 2} Part White 4589b Cone 1 x 1 with Top Groove
|
you're right 
|
|
| Author: | dmaster.hu | | Posted: | Sep 20, 2014 12:55 | | Subject: | Inventory Change Request for Set 41016-15 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4589b White Cone 1 x 1 with Top Groove (Extra)
* Change {1 to 2} Part White 4589b Cone 1 x 1 with Top Groove
|
|
| Author: | taxan | | Posted: | Sep 20, 2014 12:32 | | Subject: | Re: Inventory Change Request for Set 75016-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, taxan writes:
| | In Inventories Requests, TakeAbricK writes:
| | In Inventories Requests, namraah writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Most of the time these parts come in a set with 1 extra.
Are you sure there's only 1, or should it be 1 regular, 1 extra?
Diana
|
From what i can see from the picture of the set and the instructions there are
2.
On at the top of the Spider and the other are used by a Minifig for a Lightsaber.
The Minifig don't have it in its inventory.
Have a nice day.
taxan
|
Change of this invetory is almost correct in the set is only one
in metalic silver color for minifig second one is extra. So
change is partial correct. One should be added as extra also in this color.
In the set they are also 2 of this part but in LBG color used in main
build. So on the top of "Spider" you see it but in LBG color.
|
BTW
in metalic silver color was only used in Star Wars sets and
when you analyse them this particular color was only use for lightsabers. Never
for any main build as I recall.
http://www.bricklink.com/catalogItemIn.asp?P=64567&colorID=67&in=A
|
Cancel my post, I was wrong (dam those online hard to read .pdf).
Your right there are 3 in the instruction, 2 LBG and 1 Metallic Silver so the
the last on should be moved to "Extra".
Have a nice day.
taxan
|
|
| Author: | Hygrotus | | Posted: | Sep 20, 2014 11:14 | | Subject: | Re: Inventory Change Request for Set 75016-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, taxan writes:
| | In Inventories Requests, TakeAbricK writes:
| | In Inventories Requests, namraah writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Most of the time these parts come in a set with 1 extra.
Are you sure there's only 1, or should it be 1 regular, 1 extra?
Diana
|
From what i can see from the picture of the set and the instructions there are
2.
On at the top of the Spider and the other are used by a Minifig for a Lightsaber.
The Minifig don't have it in its inventory.
Have a nice day.
taxan
|
Change of this invetory is almost correct in the set is only one
in metalic silver color for minifig second one is extra. So
change is partial correct. One should be added as extra also in this color.
In the set they are also 2 of this part but in LBG color used in main
build. So on the top of "Spider" you see it but in LBG color.
|
BTW
in metalic silver color was only used in Star Wars sets and
when you analyse them this particular color was only use for lightsabers. Never
for any main build as I recall.
http://www.bricklink.com/catalogItemIn.asp?P=64567&colorID=67&in=A
|
|
| Author: | Hygrotus | | Posted: | Sep 20, 2014 11:10 | | Subject: | Re: Inventory Change Request for Set 75016-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, taxan writes:
| | In Inventories Requests, TakeAbricK writes:
| | In Inventories Requests, namraah writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Most of the time these parts come in a set with 1 extra.
Are you sure there's only 1, or should it be 1 regular, 1 extra?
Diana
|
From what i can see from the picture of the set and the instructions there are
2.
On at the top of the Spider and the other are used by a Minifig for a Lightsaber.
The Minifig don't have it in its inventory.
Have a nice day.
taxan
|
Change of this invetory is almost correct in the set is only one
in metalic silver color for minifig second one is extra. So
change is partial correct. One should be added as extra also in this color.
In the set they are also 2 of this part but in LBG color used in main
build. So on the top of "Spider" you see it but in LBG color.
|
|
| Author: | TakeAbricK | | Posted: | Sep 20, 2014 04:02 | | Subject: | Re: Inventory Change Request for Set 75016-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, namraah writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Most of the time these parts come in a set with 1 extra.
Are you sure there's only 1, or should it be 1 regular, 1 extra?
Diana
|
|
| Author: | namraah | | Posted: | Sep 20, 2014 03:31 | | Subject: | Inventory Change Request for Set 75016-1 | | Viewed: | 36 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
|
| Author: | viejos | | Posted: | Sep 19, 2014 22:50 | | Subject: | Re: BrickLink China店铺微博推广活动诚邀您的加入 | | Viewed: | 68 times | | Topic: | Announce | |
|
| In 中文, cs_china writes:
| | 尊敬的卖家您好，
BrickLink（以下简称BL）的中文页BrickLink China（以下简称BLC）已经推出1个月了。感谢大家一直以来对BLC的期待和鼓励。
访问BrickLink China：http://www.bricklink.com/china/
我们开设了BLC的新浪官方微博平台：BricklinkChina，欢迎您关注我们。
我们的微博地址：http://weibo.com/u/2833298890
BrickLink China店铺微博推广活动：
如果您在店铺的Splash和Store Terms页中加入中文的店铺指南和介绍，并允许发货到中国大陆、香港、台湾、澳门和新加坡，我们会定期在微博平台免费推送您的BL店铺，让更多的中文用户看到您的商店。
我们还将在近期开设支付宝等其他中国大陆第三方支付平台交易方式，方便中国大陆地区买家的购买。
希望您能经常在讨论区的中文分区发布新的主题帖。让更多的中文用户加入到BLC的讨论中来。中文区暂不设有分区和主题，大家可以直接发布自己的讨论帖。
如果您对BL有任何宝贵意见和建议，请随时回复本帖告知我们。
BrickLink China工作团队期待您的回复！
——BrickLink China团队
客户服务与支持
|
显然，我们有一个新的讨论主持人，cs_china。欢迎登机！
http://www.bricklink.com/memberAdmins.asp
|
|
| Author: | gvbricks | | Posted: | Sep 19, 2014 17:06 | | Subject: | Inventory Change Request for Set 79007-1 | | Viewed: | 37 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 30237b Black Brick, Modified 1 x 2 with Vertical Clip (thick open O clip) (Alternate) (match ID 1)
* Change 4 Part Black 30237 Brick, Modified 1 x 2 with Vertical Clip {match ID 0 to 1}
|
|
| Author: | jancg | | Posted: | Sep 19, 2014 05:11 | | Subject: | Re: Inventory Change Request for Set 4477-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| Again, instead of fiddling with alternate parts, I propose to add an alternate
set 4477-2 to the catalog. This would also make it easy to incorporate the alternate
instructions.
|
|
| Author: | GeekySabrina | | Posted: | Sep 19, 2014 04:52 | | Subject: | Re: Inventory Change Request for Set 4477-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Brickwilbo writes:
| | In Inventories Requests, Brickwilbo writes:
| | In Inventories Requests, Ogdy writes:
| | Please make changes to the following inventory:
* Change {3 to 2} Part Dark Gray 3460 Plate 1 x 8
Comments from Submitter:
Need only 2 of this part in Step 10 of the instruction. Couldn't find any further usage.
Maybe there are different instructions, perhaps someone could check this.
|
The 3d is in step 17 on top.
|
|
Well, so it seems there are at least 2 different instructions.
In mine there is no such part in step 17.
Instruction has Number 4193291 (c) 2003.
|
|
|
| Author: | Brickwilbo | | Posted: | Sep 19, 2014 04:18 | | Subject: | Re: Inventory Change Request for Set 4477-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Brickwilbo writes:
| | In Inventories Requests, Ogdy writes:
| | Please make changes to the following inventory:
* Change {3 to 2} Part Dark Gray 3460 Plate 1 x 8
Comments from Submitter:
Need only 2 of this part in Step 10 of the instruction. Couldn't find any further usage.
Maybe there are different instructions, perhaps someone could check this.
|
The 3d is in step 17 on top.
|
|
|
|
| Author: | Brickwilbo | | Posted: | Sep 19, 2014 04:16 | | Subject: | Re: Inventory Change Request for Set 4477-1 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Ogdy writes:
| | Please make changes to the following inventory:
* Change {3 to 2} Part Dark Gray 3460 Plate 1 x 8
Comments from Submitter:
Need only 2 of this part in Step 10 of the instruction. Couldn't find any further usage.
Maybe there are different instructions, perhaps someone could check this.
|
The 3d is in step 17 on top.
|
|
| Author: | GeekySabrina | | Posted: | Sep 19, 2014 04:13 | | Subject: | Inventory Change Request for Set 4477-1 | | Viewed: | 46 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {3 to 2} Part Dark Gray 3460 Plate 1 x 8
Comments from Submitter:
Need only 2 of this part in Step 10 of the instruction. Couldn't find any further usage.
Maybe there are different instructions, perhaps someone could check this.
|
|
| Author: | dmaster.hu | | Posted: | Sep 19, 2014 03:39 | | Subject: | Inventory Change Request for Set 6780-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Part White {4774cU Electric, Sound Siren 9V 2 x 2 x 1 1/3 Undetermined Noise Type to 4774c02 Electric, Sound Siren 9V 2 x 2 x 1 1/3 with Two Space Noises}
|
|
| Author: | Miro78 | | Posted: | Sep 18, 2014 16:44 | | Subject: | Re: Inventory Change Request for Set 21107-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, poskar writes:
| | Please make changes to the following inventory:
* Add 3 Minifig min008 Minecraft Figure Micromob Enderman
|
You have to also submit part deletion requests for the individual parts that
make up these minifigs, in order to keep the total parts in a set constant.
Miro
|
| Author: | poskar | | Posted: | Sep 18, 2014 16:41 | | Subject: | Inventory Change Request for Set 21107-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 3 Minifig min008 Minecraft Figure Micromob Enderman
|
| Author: | StarBrick | | Posted: | Sep 18, 2014 15:58 | | Subject: | Re: Negative Feedback Note | | Viewed: | 56 times | | Topic: | Suggestions | |
|
| Thanks!
Voted YES!!!
|
| Author: | Hygrotus | | Posted: | Sep 18, 2014 15:06 | | Subject: | Inventory Change Request for Set 75052-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 1 Minifig {sw548 Stormtrooper (Tatooine) with Dirt Stains, Patterned Head (Sandtrooper) (75052) to sw548a Stormtrooper (Tatooine) with Black Pauldron, Re-Breather on Back, Dirt Stains, Patterned Head (Sandtrooper) (75052)}
Comments from Submitter:
Correct minifig assembly for this set
|
|
| Author: | jennnifer | | Posted: | Sep 18, 2014 12:01 | | Subject: | Re: Inventory Change Request for Book B110 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Pippin writes:
| | This set also contains two black rubber rings that fit around Part 3736 (Technic,
Steering Pulley Large). They are distinctly different from the rubber belts (x89,
x90, etc). I cannot locate the item in the Bricklink Catalog.
|
It would be great if you could add these to the catalog. The note on this inventory
does indicate that these parts are missing.
Thanks!
Jen
|
|
| Author: | LordSkylark | | Posted: | Sep 18, 2014 10:58 | | Subject: | Re: Inventory Change Request for Book B110 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Pippin writes:
| | This set also contains two black rubber rings that fit around Part 3736 (Technic,
Steering Pulley Large). They are distinctly different from the rubber belts (x89,
x90, etc). I cannot locate the item in the Bricklink Catalog.
|
Feel free to add them to the catalog then.
|
| Author: | elias3 | | Posted: | Sep 18, 2014 06:01 | | Subject: | Inventory Change Request for Set 7945-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 30000pb02 Dark Bluish Gray Brick, Modified 2 x 2 with Pins and Axle Hole with Red and White Danger Stripes Pattern (Sticker) - Set 7945 (Counterpart)
|
|
| Author: | happygolucky | | Posted: | Sep 18, 2014 05:27 | | Subject: | Inventory Change Request for Set 70727-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 85984pb062 Red Slope 30 1 x 2 x 2/3 with Silver Oscilloscope with Sine Wave Pattern (Sticker) - Set 70727 (Counterpart)
* Add 1 Part 50950pb077L Red Slope, Curved 3 x 1 No Studs with White, Yellow and Dark Red Flame Pattern Model Left Side (Sticker) - Set 70727 (Counterpart)
* Add 1 Part 50950pb077R Red Slope, Curved 3 x 1 No Studs with White, Yellow and Dark Red Flame Pattern Model Right Side (Sticker) - Set 70727 (Counterpart)
* Add 1 Part 93606pb028 Red Slope, Curved 4 x 2 No Studs with Silver Engine Pattern (Sticker) - Set 70727 (Counterpart)
* Add 2 Part 32271pb010 Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with Tread Plate, Black Triangle and Rectangle on Silver Background Pattern (Sticker) - Set (Counterpart)
* Add 1 Part 61071pb006 Red Technic, Panel Car Mudguard Left with White, Yellow and Dark Red Flames Pattern (Sticker) - Set 70727 (Counterpart)
* Add 1 Part 61070pb006 Red Technic, Panel Car Mudguard Right with White, Yellow and Dark Red Flames Pattern (Sticker) - Set 70727 (Counterpart)
* Add 2 Part 47753pb057 Red Wedge 4 x 4 No Top Studs with 3 Air Intakes Pattern (Sticker) - Set 70727 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
| Author: | bb271702 | | Posted: | Sep 18, 2014 03:47 | | Subject: | Inventory Change Request for Set 8653-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3004pb120 Black Brick 1 x 2 with Ferrari Logo, Silver Horse Pattern on End (Sticker) - Set 8653 (Counterpart)
* Add 1 Part 32316pb008 Red Technic, Liftarm 1 x 5 Thick with Ferrari Logo Pattern (Sticker) - Set 8653 (Counterpart)
* Add 1 Part 40490pb011 Red Technic, Liftarm 1 x 9 Thick with Silver 'Ferrari' Pattern (Sticker) - Set 8653 (Counterpart)
* Add 1 Part 44350pb020 Red Technic, Panel Fairing #20 Large Long, Small Hole, Side A with 'pininfarina' Pattern (Sticker) - Set 8653 (Counterpart)
* Add 1 Part 44351pb020 Red Technic, Panel Fairing #21 Large Long, Small Hole, Side B with 'pininfarina' Pattern (Sticker) - Set 8653 (Counterpart)
Comments from Submitter:
Apart from the 3 stickered assy's, which didn't make it past scrutineering, these complete the stickered parts in this set
|
|
| Author: | Pippin | | Posted: | Sep 17, 2014 21:05 | | Subject: | Re: Inventory Change Request for Book B110 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| This set also contains two black rubber rings that fit around Part 3736 (Technic,
Steering Pulley Large). They are distinctly different from the rubber belts (x89,
x90, etc). I cannot locate the item in the Bricklink Catalog.
|
|
| Author: | Pippin | | Posted: | Sep 17, 2014 20:05 | | Subject: | Inventory Change Request for Book B110 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory: [B=B110]
* Add 4 Part 3701 Dark Bluish Gray Technic, Brick 1 x 4 with Holes (Alternate) (match ID 1)
* Add 2 Part 3894 Dark Bluish Gray Technic, Brick 1 x 6 with Holes (Alternate) (match ID 2)
* Add 2 Part 3895 Dark Bluish Gray Technic, Brick 1 x 12 with Holes (Alternate) (match ID 3)
* Add 3 Part 3647 Dark Bluish Gray Technic, Gear 8 Tooth Type 1 (Alternate) (match ID 4)
* Add 2 Part 3736 Black Technic, Steering Pulley Large (Alternate) (match ID 5)
* Change 4 Part Black 3701 Technic, Brick 1 x 4 with Holes {match ID 0 to 1}
* Change 2 Part Black 3894 Technic, Brick 1 x 6 with Holes {match ID 0 to 2}
* Change 2 Part Black 3895 Technic, Brick 1 x 12 with Holes {match ID 0 to 3}
* Change 3 Part Black 3647 Technic, Gear 8 Tooth Type 1 {match ID 0 to 4}
* Change 2 Part Light Bluish Gray 3736 Technic, Steering Pulley Large {match ID 0 to 5}
Comments from Submitter:
My set - purchased in Australia - came with alternative colours for five different Technic parts.
|
|
| Author: | rtzx9r | | Posted: | Sep 17, 2014 17:07 | | Subject: | Re: Negative Feedback Note | | Viewed: | 65 times | | Topic: | Suggestions | |
|
| In Suggestions, DarkDragon writes:
| | That's quite wordy. I don't think people will read it.
|
A few more paragraphs Ken, and you'll be into Foster territory.
|
| Author: | Made_In_Bricks | | Posted: | Sep 17, 2014 15:33 | | Subject: | Re: Negative Feedback Note | | Viewed: | 76 times | | Topic: | Suggestions | |
|
| In Suggestions, DarkDragon writes:
| | That's quite wordy. I don't think people will read it.
|
I thought the first one was wordy too, this is just more wordy , but bullet
form would work thought too
Ken
|
| Author: | DarkDragon | | Posted: | Sep 17, 2014 15:12 | | Subject: | Re: Negative Feedback Note | | Viewed: | 77 times | | Topic: | Suggestions | |
|
| | That's quite wordy. I don't think people will read it. |
| Author: | bagelboybugle | | Posted: | Sep 17, 2014 14:59 | | Subject: | Re: BrickLink China店鋪微博推廣活動誠邀您的加入 | | Viewed: | 83 times | | Topic: | Problem | |
|
| In Problem, ToddMyers writes:
| | Reported cs_china as a fraud account. If this were a legit account, it should
be listed as "BrickLink Administrator" (as is done with other legitimate cs accounts).
|
I agree and there are no announcements on the issue so this thread can be unlocked
by cs team later if it is genuine
Gareth
|
|
| Author: | Made_In_Bricks | | Posted: | Sep 17, 2014 14:31 | | Subject: | Negative Feedback Note | | Viewed: | 257 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
|
| Was leaving feedback on a completed NPB and got this message
"You have just left a negative feedback comment. If this is due to non payment
then please go to the problem order page to see your next available options on
how you may proceed with your complaint."
This was after a NPB was completed...
I like there being a message, I just wish it was different.
I would prefer a message saying something along these lines:
And the voting for my suggestions is changing it to the following text
"You have just left a negative feedback comment. Have you contacted the buyer/seller?
If you were unable to resolve your issues please go to the problem order page
to see your next available options on how you may proceed with your complaint.
Leaving negative feedback before contacting the buyer/seller should only be
left AFTER you have attempted to resolve through the buyer/seller"
with buyer/seller being appropriately substituted for your situation.
Thanks,
Ken
|
|
| Author: | ZwarteMagica | | Posted: | Sep 17, 2014 14:20 | | Subject: | Inventory Change Request for Set 7905-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 73090bpb01 Black Boat Weight 2 x 6 x 2 - Bottom Sealed, Dimple on Ends with White '7905' Pattern (Sticker) - Set 7905 (Alternate)
|
|
| Author: | randyf | | Posted: | Sep 17, 2014 13:39 | | Subject: | Inventory Change Request for Set 70700-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 47905 Dark Bluish Gray Brick, Modified 1 x 1 with Studs on 2 Sides (match ID 1)
* Delete 1 Part 42446 Dark Bluish Gray Minifig, Neck Bracket with Back Stud (match ID 1)
* Delete 2 Part 95199 Dark Bluish Gray Minifig, Weapon Gun, Two Barrel Pistol (match ID 1)
* Delete 1 Part 4592c02 White Lever Small Base with Black Lever (match ID 1)
* Delete 1 Minifig gs007 Dark Azure Robot Sidekick (match ID 1)
* Change 1 Minifig gs002 Dark Azure Robot Sidekick with Jet Pack {Alternate to Regular} {match ID 1 to 0}
Comments from Submitter:
The correct minifig in this set is gs002, since the robot is shown built with the jet pack. I don't know why a prior request to add an alternate minifig and parts was completed. This request reverses those changes so that the inventory is correct.
|
|
| Author: | elias3 | | Posted: | Sep 17, 2014 13:26 | | Subject: | Inventory Change Request for Set 60063-22 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3794 Lime Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 2 Part Lime 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version
|
|
| Author: | enig | | Posted: | Sep 17, 2014 05:53 | | Subject: | Inventory Change Request for Set 10224-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 2453 Light Bluish Gray Brick 1 x 1 x 5 (Alternate) (match ID 17)
* Change 4 Part Light Bluish Gray 2453b Brick 1 x 1 x 5 - Solid Stud {match ID 0 to 17}
Comments from Submitter:
sealed set contents. Thanks!
|
|
| Author: | stecre | | Posted: | Sep 17, 2014 04:31 | | Subject: | Inventory Change Request for Gear 50006 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory: [G=50006]
* Add 1 Part 3794 Light Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Light Bluish Gray 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
Verified from sealed sets
|
| Author: | Brettj666 | | Posted: | Sep 16, 2014 22:54 | | Subject: | Re: 测试 | | Viewed: | 91 times | | Topic: | General | |
|
| In General, ToddMyers writes:
| | In 中文, cs_china writes:
| | In 中文, cs_china writes:
回复测试。
|
Anyone know if this is a genuine BrickLink CS account? Wondering if I should
report it under the problem tab.
|
I think a real one would be labelled admin
|
| Author: | kvanroon | | Posted: | Sep 16, 2014 22:21 | | Subject: | Inventory Change Request for Set 41058-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 4150 Pearl Gold Tile, Round 2 x 2 (Alternate) (match ID 3)
* Change 4 Part Pearl Gold 14769 Tile, Round 2 x 2 with Bottom Stud Holder {match ID 0 to 3}
|
|
| Author: | Poohman50 | | Posted: | Sep 16, 2014 12:23 | | Subject: | Inventory Change Request for Set 3187-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 57895pb024L Trans-Clear Glass for Window 1 x 4 x 6 with Silver Butterfly and Pink Floral Pattern on Left Side (Sticker) - Set 3187 (Counterpart)
* Add 1 Part 57895pb024R Trans-Clear Glass for Window 1 x 4 x 6 with Silver Butterfly and Pink Floral Pattern on Right Side (Sticker) - Set 3187 (Counterpart)
|
|
| Author: | kvanroon | | Posted: | Sep 16, 2014 11:46 | | Subject: | Inventory Change Request for Set 70815-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 6 Part 30237 White Brick, Modified 1 x 2 with Vertical Clip (Alternate) (match ID 1)
* Change 6 Part White 30237b Brick, Modified 1 x 2 with Vertical Clip (thick open O clip) {match ID 0 to 1}
|
| Author: | jancg | | Posted: | Sep 16, 2014 04:27 | | Subject: | Re: Inventory Change Request for Set 60050-1 | | Viewed: | 28 times | | Topic: | Inventories Requests | |
|
| In the past there have been several sets produced with different instructions
and significantly different parts. Too different to add as alternative parts
in my opinion!
I propose to add set 60050-2 to the catalog!
|
|
| Author: | elias3 | | Posted: | Sep 16, 2014 04:16 | | Subject: | Re: Inventory Change Request for Set 60050-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| | In Inventories Requests, bnsf734 writes:
| | Please make changes to the following inventory:
* Add 4 Part 3298 Black Slope 33 3 x 2 (Alternate)
* Change 4 Part Black 30363 Slope 18 4 x 2 {match ID 0 to 587111}
|
Hi
as you asked in your other post...
it's not correct
there are already 3 alternate parts in the inventory, so next will be n° 4.
on the MID you need to fill in for the 'add' part '4'
and for the 'change' part (what is well correct in this step) you need
also fill in '4' by MID.
Why did you fill in 587111 ?
Stefaan
|
and forgot:
best is to cancel your forum post for your request here (also your other) and
also delete you request here:
http://www.bricklink.com/catalogInvChangeItem.asp?viewStatus=0&viewType=M
|
|
| Author: | elias3 | | Posted: | Sep 16, 2014 04:13 | | Subject: | Re: Inventory Change Request for Set 60050-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, bnsf734 writes:
| | Please make changes to the following inventory:
* Add 4 Part 3298 Black Slope 33 3 x 2 (Alternate)
* Change 4 Part Black 30363 Slope 18 4 x 2 {match ID 0 to 587111}
|
Hi
as you asked in your other post...
it's not correct
there are already 3 alternate parts in the inventory, so next will be n° 4.
on the MID you need to fill in for the 'add' part '4'
and for the 'change' part (what is well correct in this step) you need
also fill in '4' by MID.
Why did you fill in 587111 ?
Stefaan
|
|
| Author: | bnsf734 | | Posted: | Sep 16, 2014 04:04 | | Subject: | Re: Inventory Change Request for Set 60050-1 | | Viewed: | 19 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, paulvdb writes:
| | In Inventories Requests, bnsf734 writes:
| | Looks like there are definitely 2 versions of this set as my instructions show
3x2 slopes in the construction and 3298 in the parts list but the links above
show 4x2 slopes and you can see 4x2 slopes in the instructions.
My instructions book 3 has a different reference number (6092634) to the one
in the link above.
I can't understand why there should be a difference but it certainly looks
like there is one!
Shall we just list 3298 and 30363 as alternatives?
Calvin
|
Yes, 3298 should be added as alternate.
|
I have added the alternate part now. This is quite new to me so I hope I have
got it right!
The instruction books references I have are:
Book 1 6092630
Book 2 6092632
Book 3 6092634
Calvin
|
|
| Author: | bnsf734 | | Posted: | Sep 16, 2014 03:58 | | Subject: | Inventory Change Request for Set 60050-1 | | Viewed: | 50 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 3298 Black Slope 33 3 x 2 (Alternate)
* Change 4 Part Black 30363 Slope 18 4 x 2 {match ID 0 to 587111}
|
|
| Author: | happygolucky | | Posted: | Sep 16, 2014 03:33 | | Subject: | Inventory Change Request for Set 8070-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 40490pb016 Black Technic, Liftarm 1 x 9 Thick with 2 Supercars and White Arrows Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 40490pb015 Black Technic, Liftarm 1 x 9 Thick with 2 Supercars, White Arrows, 'L' and 'R' Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 64394pb001 Red Technic, Panel Fairing #13 Large Short Smooth, Side A with 2 Air Intakes Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 64394pb002 Red Technic, Panel Fairing #13 Large Short Smooth, Side A with Air Intake and 'V8' Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 64394pb003 Red Technic, Panel Fairing #13 Large Short Smooth, Side A with Air Intake and Door Handle Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 64680pb001 Red Technic, Panel Fairing #14 Large Short Smooth, Side B with 2 Air Intakes Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 64680pb002 Red Technic, Panel Fairing #14 Large Short Smooth, Side B with Air Intake and 'V8' Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 64680pb003 Red Technic, Panel Fairing #14 Large Short Smooth, Side B with Air Intake and Door Handle Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 64392pb011 Red Technic, Panel Fairing #17 Large Smooth, Side A with 2 Black Lines Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 64392pb010 Red Technic, Panel Fairing #17 Large Smooth, Side A with Air Intake Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 64392pb009 Red Technic, Panel Fairing #17 Large Smooth, Side A with Filler Cap Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 64682pb011 Red Technic, Panel Fairing #18 Large Smooth, Side B with 2 Black Lines Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 64682pb010 Red Technic, Panel Fairing #18 Large Smooth, Side B with Air Intake Pattern (Sticker) - Set 8070 (Counterpart)
* Add 1 Part 64682pb009 Red Technic, Panel Fairing #18 Large Smooth, Side B with Filler Cap Pattern (Sticker) - Set 8070 (Counterpart)
* Add 2 Part 4162pb116 Black Tile 1 x 8 with Gray Stripes and 'V8' Pattern (Sticker) - Set 8070 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to the inventory. Thank you.
|
|
| Author: | happygolucky | | Posted: | Sep 16, 2014 03:25 | | Subject: | Inventory Change Request for Set 70145-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part x1435pb009L Dark Brown Flag 5 x 6 Hexagonal with Alien Skull in Black Circle, Black Trapezoids and Frost Pattern Model Left Side (Sticker) - Set 70145 (Counterpart)
* Add 1 Part x1435pb009R Dark Brown Flag 5 x 6 Hexagonal with Alien Skull in Black Circle, Black Trapezoids and Frost Pattern Model Right Side (Sticker) - Set 70145 (Counterpart)
* Add 1 Part 11477pb007L Dark Brown Slope, Curved 2 x 1 No Studs with White Alien Characters and Silver Arrow Pattern Model Left Side (Sticker) - Set 70145 (Counterpart)
* Add 1 Part 11477pb007R Dark Brown Slope, Curved 2 x 1 No Studs with White Alien Characters and Silver Arrow Pattern Model Right Side (Sticker) - Set 70145 (Counterpart)
* Add 1 Part 11477pb008L Dark Brown Slope, Curved 2 x 1 No Studs with White Alien Characters, Filler Cap and Rivets Pattern Model Left Side (Sticker) - Set 70145 (Counterpart)
* Add 1 Part 11477pb008R Dark Brown Slope, Curved 2 x 1 No Studs with White Alien Characters, Filler Cap and Rivets Pattern Model Right Side (Sticker) - Set 70145 (Counterpart)
* Add 1 Part 63864pb030L Red Tile 1 x 3 with Yellow and White Flame, Vents and 2 Yellow Rivets Pattern Model Left Side (Sticker) - Set 70145 (Counterpart)
* Add 1 Part 63864pb030R Red Tile 1 x 3 with Yellow and White Flame, Vents and 2 Yellow Rivets Pattern Model Right Side (Sticker) - Set 70145 (Counterpart)
* Add 1 Part 41748pb058 Dark Brown Wedge 6 x 2 Left with Alien Skull in Black Circle, Vents, Rivets and Frost Pattern (Stickers) - Set 70145 (Counterpart)
* Add 1 Part 41747pb058 Dark Brown Wedge 6 x 2 Right with Alien Skull in Black Circle, Vents, Rivets and Frost Pattern (Stickers) - Set 70145 (Counterpart)
* Add 4 Part x224pb030 Trans-Light Blue Windscreen 8 x 6 x 2 Curved with Dark Brown and Silver Armor Plates and White Frost Pattern (Stickers) - Set 70145 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to the inventory. Thank you.
|
|
| Author: | elias3 | | Posted: | Sep 16, 2014 02:21 | | Subject: | Re: Inventory Change Request for Set 60050-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| | In Inventories Requests, bnsf734 writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, bnsf734 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, bnsf734 writes:
| | Please make changes to the following inventory:
* Delete 4 Part 30363 Black Slope 18 4 x 2
* Add 4 Part 3298 Black Slope 33 3 x 2
Comments from Submitter:
Incorrect part listed on original inventory. Noted when parting out set.
|
Are there two versions of this set? I submitted the change from 3298 to 30363
because that is what was included in the sets that I parted out. If your set
has part 3298, it should be added as an alternate.
|
Thats a strange one as part 3298 is shown in the inventory in the instructions
and the instructions also show 3x2 slopes used in the construction. If 4x2 slopes
are used then the set will not fit together properly and the train tracks will
be too far from the platform. I would say the parts included in your sets were
incorrect?
Not sure how we resolve this, do we list 30363 as an alternative even though
it seems incorrect?
Calvin
|
Brickset gets their information from the Lego replacement parts site and they
list 30363 in this set. They also link to pdf instructions on the Lego site and
those also list 30363.
|
as you know, that info is not always correct
|
I know, but in this case the info was correct based on the contents of the sets
that I parted out. But based on bnsf734's request, it appears that there
are 2 versions of this set and that means that 3298 should be added as an alternate
item. At least this time it's not as bad as that one set where a trainbase
was replaced with an assembly of multiple parts.
|
Hi
Just checked, here it's also the
as already mentioned, Brickset (and TLC) has also the 30363 =
http://brickset.com/sets/60050-1/Train-Station
also the instructions inventory #6106739 and #6106743 (both page 54)
http://cache.lego.com/bigdownloads/buildinginstructions/6106739.pdf
http://cache.lego.com/bigdownloads/buildinginstructions/6106743.pdf
Maybe member bnsf734 can take some pictures from his instructions and set?
Stefaan
|
Hi
Looks like there are definitely 2 versions of this set as my instructions show
3x2 slopes in the construction and 3298 in the parts list but the links above
show 4x2 slopes and you can see 4x2 slopes in the instructions.
My instructions book 3 has a different reference number (6092634) to the one
in the link above.
I can't understand why there should be a difference but it certainly looks
like there is one!
Shall we just list 3298 and 30363 as alternatives?
Calvin
|
Hi
http://cache.lego.com/bigdownloads/buildinginstructions/6092634.pdf
Indeed also the 3298
Difference is with the to cut lines and is with date. (Online version)
Must be a first run and changed later when they found it's to close to the
tracks...?
What are the other nummers?
Stefaan
|
update: view was on an iPad, on my desktop I don't see the to cut lines
date for the new instructions is April 17, the older are a mix from Jan 14+15+21,
2014 and Dec 9, 2013.
So first run was with the shorter slopes.
|
|
| Author: | paulvdb | | Posted: | Sep 16, 2014 00:27 | | Subject: | Re: Inventory Change Request for Set 60050-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, bnsf734 writes:
| | Looks like there are definitely 2 versions of this set as my instructions show
3x2 slopes in the construction and 3298 in the parts list but the links above
show 4x2 slopes and you can see 4x2 slopes in the instructions.
My instructions book 3 has a different reference number (6092634) to the one
in the link above.
I can't understand why there should be a difference but it certainly looks
like there is one!
Shall we just list 3298 and 30363 as alternatives?
Calvin
|
Yes, 3298 should be added as alternate.
|
|
| Author: | viejos | | Posted: | Sep 15, 2014 23:02 | | Subject: | Re: Inventory Change Request for Set 6032-1 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SimplyBricks writes:
| | The problem here is that you still have to identify WHAT items from that sprue
are actually used within the set else you either force the seller to have all
of the items (including the extras and thus going directly opposite the USED
selling policy which says extras don't have to be included in USED) or you
add a note to the end of the inventory which in most cases do not get read anyway.
Then what happens when you have an item on a sprue that is used on a figure?
you can not then include the whole sprue as regular because then you would be
double counting at least one of the items.
The policy at the moment is not ideal for everyone, I agree, but at least it
works for a majority of the time. I'm not closing the discussion on this,
but there are flaws to the above suggestion which would mean it's not a solution
for every scenario.
|
Take my example of how stickers are handled - the whole sheet is listed, yet
not all stickers are required for the set to be "complete". How do sellers know
which stickers need to be included? Well, they can look at the counterpart list,
but that won't give them every stickered part, especially the Sticker Over
Assembly parts that are often not permitted in the catalog.
Sellers could also build the set, or just study the instructions a bit. But however
they do it, they have been doing it successfully for years now, and I never hear
of problems over this issue. Not to mention that stickered parts are significantly
more valuable than parts from a sprue.
And the issue of minifigs. The root of the problem here is that figs are special
assemblies and their separate parts should be listed in the regular inventory
along with all the other parts. This is how TLG and Peeron do it, and they are
right. Whole figs can still be linked to sets the same way that counterparts
are.
Be that as it may, the current problem of "double listing" a particular piece
off a sprue is really of no consequence. I can't imagine a scenario where
any seller would think they would have to supply the buyer with 2 parts instead
of one. That's like worrying about empty sprues and empty sticker sheets
- they are both present in inventories, but it would be pedantic to try to somehow
show in the inventory itself that these are not required in used sets.
Instead, why not include a short sentence on the subject in the help pages? A
few precise words can replace a great deal of wrangling with the system.
To sum up - inventories need to be kept simple and as true to the original TLG
inventories as possible. This provides an *ideal* benchmark to which sellers
and buyers can aspire when completing their sets. And the sellers who I have
purchased from in the past are intelligent people who are capable of using inventories
as the *guide* they were intended to be. Just look through the older set listings
and see how some sellers handle shortcomings of the system.
And please do not underestimate the effect of notes placed at the foot of the
inventory. This is where much critical information about an inventory can be
stored, and it can bridge the gap in situations where the BL system has trouble.
A good example of this are sets with multiple versions of instructions. So please
keep using the notes!
Russell
|
|
| Author: | elias3 | | Posted: | Sep 15, 2014 22:30 | | Subject: | Re: Inventory Change Request for Set 60050-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, bnsf734 writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, bnsf734 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, bnsf734 writes:
| | Please make changes to the following inventory:
* Delete 4 Part 30363 Black Slope 18 4 x 2
* Add 4 Part 3298 Black Slope 33 3 x 2
Comments from Submitter:
Incorrect part listed on original inventory. Noted when parting out set.
|
Are there two versions of this set? I submitted the change from 3298 to 30363
because that is what was included in the sets that I parted out. If your set
has part 3298, it should be added as an alternate.
|
Thats a strange one as part 3298 is shown in the inventory in the instructions
and the instructions also show 3x2 slopes used in the construction. If 4x2 slopes
are used then the set will not fit together properly and the train tracks will
be too far from the platform. I would say the parts included in your sets were
incorrect?
Not sure how we resolve this, do we list 30363 as an alternative even though
it seems incorrect?
Calvin
|
Brickset gets their information from the Lego replacement parts site and they
list 30363 in this set. They also link to pdf instructions on the Lego site and
those also list 30363.
|
as you know, that info is not always correct
|
I know, but in this case the info was correct based on the contents of the sets
that I parted out. But based on bnsf734's request, it appears that there
are 2 versions of this set and that means that 3298 should be added as an alternate
item. At least this time it's not as bad as that one set where a trainbase
was replaced with an assembly of multiple parts.
|
Hi
Just checked, here it's also the
as already mentioned, Brickset (and TLC) has also the 30363 =
http://brickset.com/sets/60050-1/Train-Station
also the instructions inventory #6106739 and #6106743 (both page 54)
http://cache.lego.com/bigdownloads/buildinginstructions/6106739.pdf
http://cache.lego.com/bigdownloads/buildinginstructions/6106743.pdf
Maybe member bnsf734 can take some pictures from his instructions and set?
Stefaan
|
Hi
Looks like there are definitely 2 versions of this set as my instructions show
3x2 slopes in the construction and 3298 in the parts list but the links above
show 4x2 slopes and you can see 4x2 slopes in the instructions.
My instructions book 3 has a different reference number (6092634) to the one
in the link above.
I can't understand why there should be a difference but it certainly looks
like there is one!
Shall we just list 3298 and 30363 as alternatives?
Calvin
|
Hi
http://cache.lego.com/bigdownloads/buildinginstructions/6092634.pdf
Indeed also the 3298
Difference is with the to cut lines and is with date. (Online version)
Must be a first run and changed later when they found it's to close to the
tracks...?
What are the other nummers?
Stefaan
|
|
| Author: | randyf | | Posted: | Sep 15, 2014 22:19 | | Subject: | Inventory Change Request for Set 41524-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 4150 Black Tile, Round 2 x 2 (Alternate) (match ID 1)
* Change 1 Part Black 14769 Tile, Round 2 x 2 with Bottom Stud Holder {match ID 0 to 1}
Comments from Submitter:
From sealed set contents.
|
|
| Author: | Poohman50 | | Posted: | Sep 15, 2014 22:16 | | Subject: | Inventory Change Request for Set 8875-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change 2 Part Light Bluish Gray {4460 Slope 75 2 x 1 x 3 - Undetermined Stud Type to 4460a Slope 75 2 x 1 x 3 - Completely Open Stud}
Comments from Submitter:
From a sealed set.
|
|
| Author: | bnsf734 | | Posted: | Sep 15, 2014 19:57 | | Subject: | Re: Inventory Change Request for Set 60050-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, bnsf734 writes:
| | In Inventories Requests, paulvdb writes:
| | In Inventories Requests, bnsf734 writes:
| | Please make changes to the following inventory:
* Delete 4 Part 30363 Black Slope 18 4 x 2
* Add 4 Part 3298 Black Slope 33 3 x 2
Comments from Submitter:
Incorrect part listed on original inventory. Noted when parting out set.
|
Are there two versions of this set? I submitted the change from 3298 to 30363
because that is what was included in the sets that I parted out. If your set
has part 3298, it should be added as an alternate.
|
Thats a strange one as part 3298 is shown in the inventory in the instructions
and the instructions also show 3x2 slopes used in the construction. If 4x2 slopes
are used then the set will not fit together properly and the train tracks will
be too far from the platform. I would say the parts included in your sets were
incorrect?
Not sure how we resolve this, do we list 30363 as an alternative even though
it seems incorrect?
Calvin
|
Brickset gets their information from the Lego replacement parts site and they
list 30363 in this set. They also link to pdf instructions on the Lego site and
those also list 30363.
|
as you know, that info is not always correct
|
I know, but in this case the info was correct based on the contents of the sets
that I parted out. But based on bnsf734's request, it appears that there
are 2 versions of this set and that means that 3298 should be added as an alternate
item. At least this time it's not as bad as that one set where a trainbase
was replaced with an assembly of multiple parts.
|
Hi
Just checked, here it's also the
as already mentioned, Brickset (and TLC) has also the 30363 =
http://brickset.com/sets/60050-1/Train-Station
also the instructions inventory #6106739 and #6106743 (both page 54)
http://cache.lego.com/bigdownloads/buildinginstructions/6106739.pdf
http://cache.lego.com/bigdownloads/buildinginstructions/6106743.pdf
Maybe member bnsf734 can take some pictures from his instructions and set?
Stefaan
|
Hi
Looks like there are definitely 2 versions of this set as my instructions show
3x2 slopes in the construction and 3298 in the parts list but the links above
show 4x2 slopes and you can see 4x2 slopes in the instructions.
My instructions book 3 has a different reference number (6092634) to the one
in the link above.
I can't understand why there should be a difference but it certainly looks
like there is one!
Shall we just list 3298 and 30363 as alternatives?
Calvin
|
|
| Author: | kvanroon | | Posted: | Sep 15, 2014 17:16 | | Subject: | Inventory Change Request for Set 75053-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 4150 Dark Bluish Gray Tile, Round 2 x 2 (Alternate) (match ID 1)
* Change 2 Part Dark Bluish Gray 14769 Tile, Round 2 x 2 with Bottom Stud Holder {match ID 0 to 1}
|
|
| Author: | randyf | | Posted: | Sep 15, 2014 15:31 | | Subject: | Re: Inventory Change Request for Set 6032-1 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, SimplyBricks writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, viejos writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, elias3 writes:
| | In Inventories Requests, randyf writes:
| | In Inventories Requests, elias3 writes:
| | Please make changes to the following inventory:
* Add 1 Part 6029c01 White Minifig, Plume Wheel Complete, Two Cattlehorns and Feathered Headdress (Counterpart)
Comments from Submitter:
see http://www.bricklink.com/message.asp?ID=853844
|
This is an improper use of the Counterpart. Counterparts are for things that
cannot be reversed at all or easily (parts that are hard to get apart once assembled,
stickered parts, etc.). The Counterpart area should not be used to add complete
sprue parts that are taken apart to make the build. The inventories you are referring
to in these requests are correct in the way they are already set up.
Regards,
Randy
|
Hi Randy
...but why did I ask then that question because I didn't get the info about
the extra piece came with the plume wheel, If I know it I wouldn't ask it
so I did a request for me and all other not know members that it came original
with the plume wheel
Stefaan
|
But this is not how the Counterpart area is to be used. If you want to know the
set originally came with a plume wheel, then try to get the original inventory
changed to have the wheel. However, it won't get changed because all of the
parts on it are not used in the build. Some of them are extra parts, and that
is exactly how the inventories are set up currently. This same method is used
in inventories with knives on sprue, keys on sprue, tools on sprue, etc. All
of the knives, keys, tools, etc. are not always used in the builds and are thus
relegated to the Extras section of the inventories.
Cheers,
Randy
|
I think the current policy on extras is very weak and needs to be revisited.
There is no good reason that complete sprues can't be listed as regular pieces.
OK, so then the argument is that sellers would have to come up with these "extras"
to sell a set as complete. But why not have a simple statement under the site's
selling policy that says something to the effect of:
Certain pieces that are not used in the building of the set (such as extra
items on sprues, extra stickers, and brick separators) are not required to be
included when listing a used set as "complete".
The point about stickers is a perfect example of how this works. Whole sticker
sheets are listed as "Regular" in every inventory, and common sense tells people
that the unused portion of the sheet is nothing but a (very) nice extra in used
sets. Why can't we extend this element of common sense to the whole inventory
system?
|
I really like the above solution. I think that would be perfect, because I like
having the set inventories include what originally came with the set (including
complete sprues). However, it isn't up to us what gets done about this. Maybe
the Inv Admins can talk about this again with the Cat Admins? Pretty please with
a cherry on top?
Cheers,
Randy
|
The problem here is that you still have to identify WHAT items from that sprue
are actually used within the set else you either force the seller to have all
of the items (including the extras and thus going directly opposite the USED
selling policy which says extras don't have to be included in USED) or you
add a note to the end of the inventory which in most cases do not get read anyway.
Then what happens when you have an item on a sprue that is used on a figure?
you can not then include the whole sprue as regular because then you would be
double counting at least one of the items.
The policy at the moment is not ideal for everyone, I agree, but at least it
works for a majority of the time. I'm not closing the discussion on this,
but there are flaws to the above suggestion which would mean it's not a solution
for every scenario.
Emma
Senior Inventory Admin.
|
Very good point about the minifigs, Emma. I had forgotten to include that in
my thought process regarding Russell's post.
Cheers,
Randy
|
|
| Author: | Odur | | Posted: | Sep 15, 2014 15:14 | | Subject: | Inventory Change Request for Set 6824-1 | | Viewed: | 49 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3942c Light Gray Cone 2 x 2 x 2 - Completely Open Stud (Alternate) (match ID 1)
* Change 1 Part Light Gray 3942a Cone 2 x 2 x 2 - Solid Stud {match ID 0 to 1}
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, New York
Netherlands, Gelderland
Australia, New South Wales
India, Maharashtra
Canada, Quebec
Belgium, Flemish Brabant
United Kingdom, England
Ireland, Cork
Hungary, Budapest
Sweden, Västernorrland
Poland, w. Wielkopolskie
Germany, Nordrhein-Westfalen
)
)
Lithuania, Panevėžys
