Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | viejos  | | Posted: | Sep 21, 2014 23:28 | | Subject: | Re: Inventory Change Request for Set 75056-16 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, jennnifer writes:
| | | |
Judging from all of your requests, it's probably better if you actually change
the item itself, instad of have an alternate. (Since it seemed as if the original
submitter did not take variants of this type into consideration.)
|
Hello,
I am sorry, but I was very careful with these variants when entering the inventory
for this set. I am not surprised either that the sets found in Europe differ
slightly then the version I opened here in the U.S. I have observed a similar
pattern for many sets recently. I realize that there are many times when it seems
that variants for items are not verified correctly, but this is not one of them.
Thank you!
Jen
|
I agree about this part. I just confirmed this inventory:
and it had the grooved type of orange jumpers (with solid pin):
The white ones were these, right in the same set:
Russell
|
 |
| Author: | BLUSER_424058 | | Posted: | Sep 21, 2014 23:13 | | Subject: | Re: Cart Suggestion | | Viewed: | 52 times | | Topic: | Suggestions | |
|
| In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
These are multiple sellers, and you pay after an invoice, not automatically.
|
|
| Author: | starbeanie | | Posted: | Sep 21, 2014 23:05 | | Subject: | Re: Cart Suggestion | | Viewed: | 62 times | | Topic: | Suggestions | |
|
| In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
Except you can only pay after you have received an invoice from the seller.
|
|
| Author: | BLUSER_516094 | | Posted: | Sep 21, 2014 23:02 | | Subject: | Re: Cart Suggestion | | Viewed: | 66 times | | Topic: | Suggestions | |
|
| In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
| Author: | Brettj666 | | Posted: | Sep 21, 2014 22:32 | | Subject: | Re: Cart Suggestion | | Viewed: | 62 times | | Topic: | Suggestions | |
|
| In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
| Author: | BLUSER_516094 | | Posted: | Sep 21, 2014 22:27 | | Subject: | Cart Suggestion | | Viewed: | 210 times | | Topic: | Suggestions | | Status: | Implemented | |
|
| Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
|
| Author: | jennnifer | | Posted: | Sep 21, 2014 22:08 | | Subject: | Re: Inventory Change Request for Set 75056-16 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
|
| | |
Judging from all of your requests, it's probably better if you actually change
the item itself, instad of have an alternate. (Since it seemed as if the original
submitter did not take variants of this type into consideration.)
|
Hello,
I am sorry, but I was very careful with these variants when entering the inventory
for this set. I am not surprised either that the sets found in Europe differ
slightly then the version I opened here in the U.S. I have observed a similar
pattern for many sets recently. I realize that there are many times when it seems
that variants for items are not verified correctly, but this is not one of them.
Thank you!
Jen
|
|
| Author: | LordSkylark | | Posted: | Sep 21, 2014 21:31 | | Subject: | Re: Inventory Change Request for Set 75056-16 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, elias3 writes:
| | Please make changes to the following inventory:
* Add 1 Part 3794 Orange Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Orange 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
Judging from all of your requests, it's probably better if you actually change
the item itself, instad of have an alternate. (Since it seemed as if the original
submitter did not take variants of this type into consideration.)
|
|
| Author: | QCBricks | | Posted: | Sep 21, 2014 18:34 | | Subject: | Inventory Change Request for Set 76005-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 15332 Black Fence Spindled 1 x 4 x 2 with 4 Studs (Alternate) (match ID 8)
* Change 2 Part Black 30055 Fence Spindled 1 x 4 x 2 with 2 Studs {match ID 0 to 8}
Comments from Submitter:
Verified from several sealed sets
|
|
| Author: | happygolucky | | Posted: | Sep 21, 2014 15:41 | | Subject: | Inventory Change Request for Set 70725-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 44676pb016 Tan Flag 2 x 2 Trapezoid with Black Phoenix on Gold Background Pattern on Both Sides (Stickers) - Set 70725 (Counterpart)
* Add 2 Part x1435pb010 Light Bluish Gray Flag 5 x 6 Hexagonal with Mechanical Hinge Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 2431pb354R White Tile 1 x 4 with Black Stripe, Gold Air Intake and Spatters Pattern Model Right Side (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 2431pb354L White Tile 1 x 4 with Black Stripe, Red Asian Characters, Gold Air Intake and Spatters Pattern Model Left Side (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 3068bpb881 Dark Bluish Gray Tile 2 x 2 with 'AA' on Screen, Red and White Buttons, 'K 35', Lever and Arrows Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 3068bpb880 Dark Bluish Gray Tile 2 x 2 with Screen with '38 2138' and 4 Red Buttons Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 87079pb189 Black Tile 2 x 4 with Control Panel with Saw Blade and 'LOCK' Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 87079pb188 Dark Bluish Gray Tile 2 x 4 with Red and Black MechDragon Tongue Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 43712pb045 Dark Bluish Gray Wedge 6 x 4 Triple Curved with Riveted Metal Plates, Air Vent and Red Electricity Danger Sign Pattern (Stickers) - Set 70725 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
| Author: | john007 | | Posted: | Sep 21, 2014 12:24 | | Subject: | Inventory Change Request for Set 42029-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 6558 Blue Technic, Pin Long with Friction Ridges Lengthwise (Extra)
* Delete 1 Part 11214 Dark Bluish Gray Technic, Axle Pin 3L with Friction Ridges Lengthwise (Extra)
* Delete 1 Part 58176 White Light Cover with Internal Bar / Bionicle Barraki Eye (Extra)
* Add 1 Part 6589 Tan Technic, Gear 12 Tooth Bevel (Extra)
* Change {3 to 1} Part Red 3713 Technic Bush (Extra)
Comments from Submitter:
Extra pieces available just after building the A model, was a sealed set bought 1 month ago
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 10:27 | | Subject: | Inventory Change Request for Set 40083-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 4 Part 13971c01 Light Bluish Gray Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring with Black Tire Offset Tread - Band Around Center of Tread (13971 / 61254) (Counterpart)
* Add 4 Part 13971 Light Bluish Gray Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring (Alternate) (match ID 2)
* Change 4 Part Light Bluish Gray 56902 Wheel 18mm D. x 8mm with Fake Bolts and Shallow Spokes {match ID 0 to 2}
Comments from Submitter:
found the 13971 type in my set
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 07:21 | | Subject: | Inventory Change Request for Set 75056-16 | | Viewed: | 41 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Orange Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Orange 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:35 | | Subject: | Inventory Change Request for Set 75056-20 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Red 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:35 | | Subject: | Inventory Change Request for Set 75056-18 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Dark Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Add 1 Part 553c Light Bluish Gray Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 2)
* Change 1 Part Dark Bluish Gray 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
* Change 1 Part Light Bluish Gray 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 2}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
and for the 553 the -c type
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:34 | | Subject: | Inventory Change Request for Set 75056-10 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Dark Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:34 | | Subject: | Inventory Change Request for Set 75056-7 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 1 Part 3794 Blue Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Blue 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:34 | | Subject: | Inventory Change Request for Set 75056-2 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Add 2 Part 3794 Dark Blue Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 2 Part Dark Blue 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 20, 2014 13:08 | | Subject: | Re: Inventory Change Request for Set 41016-15 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, dmaster.hu writes:
| | Please make changes to the following inventory:
* Delete 1 Part 4589b White Cone 1 x 1 with Top Groove (Extra)
* Change {1 to 2} Part White 4589b Cone 1 x 1 with Top Groove
|
you're right 
|
|
| Author: | dmaster.hu | | Posted: | Sep 20, 2014 12:55 | | Subject: | Inventory Change Request for Set 41016-15 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 4589b White Cone 1 x 1 with Top Groove (Extra)
* Change {1 to 2} Part White 4589b Cone 1 x 1 with Top Groove
|
|
| Author: | taxan | | Posted: | Sep 20, 2014 12:32 | | Subject: | Re: Inventory Change Request for Set 75016-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, taxan writes:
| | In Inventories Requests, TakeAbricK writes:
| | In Inventories Requests, namraah writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Most of the time these parts come in a set with 1 extra.
Are you sure there's only 1, or should it be 1 regular, 1 extra?
Diana
|
From what i can see from the picture of the set and the instructions there are
2.
On at the top of the Spider and the other are used by a Minifig for a Lightsaber.
The Minifig don't have it in its inventory.
Have a nice day.
taxan
|
Change of this invetory is almost correct in the set is only one
in metalic silver color for minifig second one is extra. So
change is partial correct. One should be added as extra also in this color.
In the set they are also 2 of this part but in LBG color used in main
build. So on the top of "Spider" you see it but in LBG color.
|
BTW
in metalic silver color was only used in Star Wars sets and
when you analyse them this particular color was only use for lightsabers. Never
for any main build as I recall.
http://www.bricklink.com/catalogItemIn.asp?P=64567&colorID=67&in=A
|
Cancel my post, I was wrong (dam those online hard to read .pdf).
Your right there are 3 in the instruction, 2 LBG and 1 Metallic Silver so the
the last on should be moved to "Extra".
Have a nice day.
taxan
|
|
| Author: | Hygrotus | | Posted: | Sep 20, 2014 11:14 | | Subject: | Re: Inventory Change Request for Set 75016-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, taxan writes:
| | In Inventories Requests, TakeAbricK writes:
| | In Inventories Requests, namraah writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Most of the time these parts come in a set with 1 extra.
Are you sure there's only 1, or should it be 1 regular, 1 extra?
Diana
|
From what i can see from the picture of the set and the instructions there are
2.
On at the top of the Spider and the other are used by a Minifig for a Lightsaber.
The Minifig don't have it in its inventory.
Have a nice day.
taxan
|
Change of this invetory is almost correct in the set is only one
in metalic silver color for minifig second one is extra. So
change is partial correct. One should be added as extra also in this color.
In the set they are also 2 of this part but in LBG color used in main
build. So on the top of "Spider" you see it but in LBG color.
|
BTW
in metalic silver color was only used in Star Wars sets and
when you analyse them this particular color was only use for lightsabers. Never
for any main build as I recall.
http://www.bricklink.com/catalogItemIn.asp?P=64567&colorID=67&in=A
|
|
| Author: | Hygrotus | | Posted: | Sep 20, 2014 11:10 | | Subject: | Re: Inventory Change Request for Set 75016-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, taxan writes:
| | In Inventories Requests, TakeAbricK writes:
| | In Inventories Requests, namraah writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Most of the time these parts come in a set with 1 extra.
Are you sure there's only 1, or should it be 1 regular, 1 extra?
Diana
|
From what i can see from the picture of the set and the instructions there are
2.
On at the top of the Spider and the other are used by a Minifig for a Lightsaber.
The Minifig don't have it in its inventory.
Have a nice day.
taxan
|
Change of this invetory is almost correct in the set is only one
in metalic silver color for minifig second one is extra. So
change is partial correct. One should be added as extra also in this color.
In the set they are also 2 of this part but in LBG color used in main
build. So on the top of "Spider" you see it but in LBG color.
|
|
| Author: | TakeAbricK | | Posted: | Sep 20, 2014 04:02 | | Subject: | Re: Inventory Change Request for Set 75016-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, namraah writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Most of the time these parts come in a set with 1 extra.
Are you sure there's only 1, or should it be 1 regular, 1 extra?
Diana
|
|
| Author: | namraah | | Posted: | Sep 20, 2014 03:31 | | Subject: | Inventory Change Request for Set 75016-1 | | Viewed: | 36 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
|
| Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
USA, California
Canada, Ontario
Ireland, Cork
Belgium, Hainaut
Hungary, Budapest
Sweden, Västernorrland
Poland, w. Wielkopolskie
Netherlands, Gelderland
