Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | dirtydiggler  | | Posted: | Oct 30, 2014 08:51 | | Subject: | Inventory Change Request for Set 79017-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 11435pb01 Reddish Brown Eagle, Body with Beak, Eyes and Dark Brown Tail Feathers Pattern
Comments from Submitter:
Hi there,
the Eagle that comes in the "Battle of Five armies"Set #79017 is not the same as the already inventoried one! The one in the set has Dk.Brown Printings on his neck where the inventoried one is plain! The new one is a named "character" Gwaihir! Please change that!
|
 |
| Author: | yorbrick | | Posted: | Oct 30, 2014 05:18 | | Subject: | Re: MOCShop Feedback | | Viewed: | 35 times | | Topic: | Suggestions | |
| In Suggestions, Inventrious writes:
| | Okay, so I expected this to start happening soon, but I didn't expect it
to happen to me first. Someone left me four star feedback on the MOCShop because
the MOC wasn't designed well (you can view it here: http://moc.bricklink.com/pages/moc/storereviews.page?idmocstore=424058
). So I want to suggest that BrickLink posts some sorta note or something
on the Page to post feedback for orders saying that this feedback is to rate
how the order went, not what the MOC was like (and post a link to the MOC page).
Four star feedback may not be "bad", but it's not what I wanted. Thoughts?
|
A double feedback mechanism will probably work best as noted above, that is rank
the seller and rank the MOC at the same time. Although what to do if you do not
plan to build the MOC for some time?
However, rating the seller and the MOC at the same time may lead to sellers stocking
only the better MOCs. If there is a MOC that looks good but performs persistently
bad, and if sellers continually get marked down for it, then they should stop
selling it.
In "real life", would you frequent a store that someone else told you sells rubbish.
They do it very efficiently, but most of their products are junk.
|
|
| Author: | BLUSER_424058 | | Posted: | Oct 30, 2014 00:44 | | Subject: | Re: MOCShop Feedback | | Viewed: | 51 times | | Topic: | Suggestions | |
| In Suggestions, trklemm writes:
| | I would suggest a 2 part feedback. 1 to rate the seller and their service, and
another section to rate the MOC and its attributes.
Tom
In Suggestions, Inventrious writes:
| | Okay, so I expected this to start happening soon, but I didn't expect it
to happen to me first. Someone left me four star feedback on the MOCShop because
the MOC wasn't designed well (you can view it here: http://moc.bricklink.com/pages/moc/storereviews.page?idmocstore=424058
). So I want to suggest that BrickLink posts some sorta note or something
on the Page to post feedback for orders saying that this feedback is to rate
how the order went, not what the MOC was like (and post a link to the MOC page).
Four star feedback may not be "bad", but it's not what I wanted. Thoughts?
|
|
That works aswell. Easier than the way it is now.
|
|
| Author: | trklemm | | Posted: | Oct 30, 2014 00:25 | | Subject: | Re: MOCShop Feedback | | Viewed: | 37 times | | Topic: | Suggestions | |
| I would suggest a 2 part feedback. 1 to rate the seller and their service, and
another section to rate the MOC and its attributes.
Tom
In Suggestions, Inventrious writes:
| | Okay, so I expected this to start happening soon, but I didn't expect it
to happen to me first. Someone left me four star feedback on the MOCShop because
the MOC wasn't designed well (you can view it here: http://moc.bricklink.com/pages/moc/storereviews.page?idmocstore=424058
). So I want to suggest that BrickLink posts some sorta note or something
on the Page to post feedback for orders saying that this feedback is to rate
how the order went, not what the MOC was like (and post a link to the MOC page).
Four star feedback may not be "bad", but it's not what I wanted. Thoughts?
|
|
|
| Author: | viejos | | Posted: | Oct 29, 2014 22:12 | | Subject: | Inventory Change Request for Set 40183-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part Trans-Clear {3004 Brick 1 x 2 to 3065 Brick 1 x 2 without Bottom Tube}
|
| Author: | viejos | | Posted: | Oct 29, 2014 22:10 | | Subject: | Inventory Change Request for Set 40180-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 6 Part Trans-Clear {3004 Brick 1 x 2 to 3065 Brick 1 x 2 without Bottom Tube}
|
|
| Author: | Brettj666 | | Posted: | Oct 29, 2014 14:38 | | Subject: | Re: Stop Bogus Sellers | | Viewed: | 53 times | | Topic: | Suggestions | |
| In Suggestions, legogel writes:
| | In Suggestions, Rick83 writes:
| | I'm very annoyed with bogus sellers appeared in the last month in Spain,
Portugal, Gibraltar, Andorra and southern France. Bricklink administrators don't
work actively to stop this problem. There are at least 3 seller in this moment
offering rare sets with low prices. With 0 feedbacks and they just been registered.
These sellers are very suspicious.
This kind of scam are very pernicious for a good working in this marketplace,
Please stop this kind of activities.
|
As I said I've found at least 3 users in the last week, It's easy to
stop the scammers.
They work in this way:
- they are selling rare sets at a "good" price
- Don't allow or don't have a paypal account
- They have 0 Feebacks and the same day they are logged open an store
- They know which sets has a valuable price
- They are located in (Spain, Portugal, Gibraltar, Andorra and France)
- Don't reply if you ask for pictures.
I think is the same person or group of persons.
|
It's possible that it's the same group, but as an analyst, I'll tell
you if you look for patterns, I'd change methods before giving up (if I was
a scammer)
|
|
| Author: | Afinke1 | | Posted: | Oct 29, 2014 14:26 | | Subject: | Re: Stop Bogus Sellers | | Viewed: | 53 times | | Topic: | Suggestions | |
| In Suggestions, Rick83 writes:
| | I'm very annoyed with bogus sellers appeared in the last month in Spain,
Portugal, Gibraltar, Andorra and southern France. Bricklink administrators don't
work actively to stop this problem. There are at least 3 seller in this moment
offering rare sets with low prices. With 0 feedbacks and they just been registered.
These sellers are very suspicious.
This kind of scam are very pernicious for a good working in this marketplace,
Please stop this kind of activities.
|
As I said I've found at least 3 users in the last week, It's easy to
stop the scammers.
They work in this way:
- they are selling rare sets at a "good" price
- Don't allow or don't have a paypal account
- They have 0 Feebacks and the same day they are logged open an store
- They know which sets has a valuable price
- They are located in (Spain, Portugal, Gibraltar, Andorra and France)
- Don't reply if you ask for pictures.
I think is the same person or group of persons.
|
|
| Author: | Macaronis | | Posted: | Oct 29, 2014 11:20 | | Subject: | Re: Stop Bogus Sellers | | Viewed: | 49 times | | Topic: | Suggestions | |
| In Suggestions, cjgordon926 writes:
| | In Suggestions, Rick83 writes:
|
| | How would they do that?? Since everyone starts on BL with a "0" feedback score
there is no way to tell who is truly a AFOL or a scammer. They also don't
have the time or resources to monitor every item that every seller has listed
for sale in their inventory and at what price.
|
There is something that CAN BE done to prevent this. Problem is its clear over
the last Decade+ of me hinting this solution to Dan, Eric and some of the folks
here they have NO idea how to fully utilize the functionality of a DB. The Solution
is something learned in DB Analysis 101. Outside of me complaining about it I
don't understand why its such a Hard thing to do unless the Original DB was
created in such a Poor Manner there is NO way to get that info, which means someone
SHOULD clean it up and start from scratch. I had asked in the past and never
got a response so I let it go.
As far as I see it with some common sense its should be pretty obvious who the
scammers are. If you can see it, the DB can be made aware of it the same way
you visually see the Obvious scammers.
If you don't believe me, Sit back and do some of your Own analysis on what
triggers you to say hey that person is a Scammer. That info you just came up
with CAN be created in a backend Script to do it AUTOMATICALLY and told to output
a particular solution such as Lock account or email the admin. Automation isn't
hard, you just have to have a clue on what to look for.
|
|
| Author: | Brettj666 | | Posted: | Oct 29, 2014 10:39 | | Subject: | Re: Stop Bogus Sellers | | Viewed: | 66 times | | Topic: | Suggestions | |
| In Suggestions, Spudz27 writes:
| | In Suggestions, cjgordon926 writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, cjgordon926 writes:
| | In Suggestions, Rick83 writes:
| | I'm very annoyed with bogus sellers appeared in the last month in Spain,
Portugal, Gibraltar, Andorra and southern France. Bricklink administrators don't
work actively to stop this problem. There are at least 3 seller in this moment
offering rare sets with low prices. With 0 feedbacks and they just been registered.
These sellers are very suspicious.
This kind of scam are very pernicious for a good working in this marketplace,
Please stop this kind of activities.
|
How would they do that?? Since everyone starts on BL with a "0" feedback score
there is no way to tell who is truly a AFOL or a scammer. They also don't
have the time or resources to monitor every item that every seller has listed
for sale in their inventory and at what price.
I do agree that something needs to be done about the large number of scammers
that do seem to be appearing lately but the question is how??
Maybe set up a system that monitors new sellers with a feedback score of, lets
say, 25 or less and has items (or sets) at a price set below the 6 month average??
I'm not a programmer so I don't know if that would even be possible.
CJ.
|
I would say the way to go is limit the amount they can list for sale without
some due diligence of verification.
If you say "You can't list below the 6 month average", if I was a scammer,
I'd say "Ok", and list at the average or just slightly above, and then offer
free shipping.
Honestly, I'd be suspicious of anyone coming to BL on day one, setting up
a store, listing things without asking questions or taking the time to read
all the help files. Not like it's impossible, but..
|
I agree!! I've been on BL since 2007 (as a buyer) and am just now setting
up a store, I still have a ton of questions that I'm finding answers for
so I am baffled by people who can open a store and hit the ground running on
the same day that they sign up on BL!!
CJ
|
I am new here wish I had known of this site a year ago. On other sites I am a
member of (not lego related) you must have feedback of 10 before you can sell,
you also must have a certain amount of forum posts. This is to try and stop scammers
and it seems to have worked, however there is 1/10th the member base. Another
simple one is just buy from people who have 95% or better feedback.
|
A LOT of people don't know the forum exists, so (if I was in control), I
wouldn't make that a requirement, but I'd make selling on an approval
basis.
Including a phone call.
|
|
| Author: | Spudz27 | | Posted: | Oct 29, 2014 10:31 | | Subject: | Re: Stop Bogus Sellers | | Viewed: | 50 times | | Topic: | Suggestions | |
| In Suggestions, cjgordon926 writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, cjgordon926 writes:
| | In Suggestions, Rick83 writes:
| | I'm very annoyed with bogus sellers appeared in the last month in Spain,
Portugal, Gibraltar, Andorra and southern France. Bricklink administrators don't
work actively to stop this problem. There are at least 3 seller in this moment
offering rare sets with low prices. With 0 feedbacks and they just been registered.
These sellers are very suspicious.
This kind of scam are very pernicious for a good working in this marketplace,
Please stop this kind of activities.
|
How would they do that?? Since everyone starts on BL with a "0" feedback score
there is no way to tell who is truly a AFOL or a scammer. They also don't
have the time or resources to monitor every item that every seller has listed
for sale in their inventory and at what price.
I do agree that something needs to be done about the large number of scammers
that do seem to be appearing lately but the question is how??
Maybe set up a system that monitors new sellers with a feedback score of, lets
say, 25 or less and has items (or sets) at a price set below the 6 month average??
I'm not a programmer so I don't know if that would even be possible.
CJ.
|
I would say the way to go is limit the amount they can list for sale without
some due diligence of verification.
If you say "You can't list below the 6 month average", if I was a scammer,
I'd say "Ok", and list at the average or just slightly above, and then offer
free shipping.
Honestly, I'd be suspicious of anyone coming to BL on day one, setting up
a store, listing things without asking questions or taking the time to read
all the help files. Not like it's impossible, but..
|
I agree!! I've been on BL since 2007 (as a buyer) and am just now setting
up a store, I still have a ton of questions that I'm finding answers for
so I am baffled by people who can open a store and hit the ground running on
the same day that they sign up on BL!!
CJ
|
I am new here wish I had known of this site a year ago. On other sites I am a
member of (not lego related) you must have feedback of 10 before you can sell,
you also must have a certain amount of forum posts. This is to try and stop scammers
and it seems to have worked, however there is 1/10th the member base. Another
simple one is just buy from people who have 95% or better feedback.
|
|
| Author: | cjgordon926 | | Posted: | Oct 29, 2014 09:50 | | Subject: | Re: Stop Bogus Sellers | | Viewed: | 44 times | | Topic: | Suggestions | |
| In Suggestions, Brettj666 writes:
| | In Suggestions, cjgordon926 writes:
| | In Suggestions, Rick83 writes:
| | I'm very annoyed with bogus sellers appeared in the last month in Spain,
Portugal, Gibraltar, Andorra and southern France. Bricklink administrators don't
work actively to stop this problem. There are at least 3 seller in this moment
offering rare sets with low prices. With 0 feedbacks and they just been registered.
These sellers are very suspicious.
This kind of scam are very pernicious for a good working in this marketplace,
Please stop this kind of activities.
|
How would they do that?? Since everyone starts on BL with a "0" feedback score
there is no way to tell who is truly a AFOL or a scammer. They also don't
have the time or resources to monitor every item that every seller has listed
for sale in their inventory and at what price.
I do agree that something needs to be done about the large number of scammers
that do seem to be appearing lately but the question is how??
Maybe set up a system that monitors new sellers with a feedback score of, lets
say, 25 or less and has items (or sets) at a price set below the 6 month average??
I'm not a programmer so I don't know if that would even be possible.
CJ.
|
I would say the way to go is limit the amount they can list for sale without
some due diligence of verification.
If you say "You can't list below the 6 month average", if I was a scammer,
I'd say "Ok", and list at the average or just slightly above, and then offer
free shipping.
Honestly, I'd be suspicious of anyone coming to BL on day one, setting up
a store, listing things without asking questions or taking the time to read
all the help files. Not like it's impossible, but..
|
I agree!! I've been on BL since 2007 (as a buyer) and am just now setting
up a store, I still have a ton of questions that I'm finding answers for
so I am baffled by people who can open a store and hit the ground running on
the same day that they sign up on BL!!
CJ
|
|
| Author: | Brettj666 | | Posted: | Oct 29, 2014 09:44 | | Subject: | Re: Stop Bogus Sellers | | Viewed: | 53 times | | Topic: | Suggestions | |
| In Suggestions, cjgordon926 writes:
| | In Suggestions, Rick83 writes:
| | I'm very annoyed with bogus sellers appeared in the last month in Spain,
Portugal, Gibraltar, Andorra and southern France. Bricklink administrators don't
work actively to stop this problem. There are at least 3 seller in this moment
offering rare sets with low prices. With 0 feedbacks and they just been registered.
These sellers are very suspicious.
This kind of scam are very pernicious for a good working in this marketplace,
Please stop this kind of activities.
|
How would they do that?? Since everyone starts on BL with a "0" feedback score
there is no way to tell who is truly a AFOL or a scammer. They also don't
have the time or resources to monitor every item that every seller has listed
for sale in their inventory and at what price.
I do agree that something needs to be done about the large number of scammers
that do seem to be appearing lately but the question is how??
Maybe set up a system that monitors new sellers with a feedback score of, lets
say, 25 or less and has items (or sets) at a price set below the 6 month average??
I'm not a programmer so I don't know if that would even be possible.
CJ.
|
I would say the way to go is limit the amount they can list for sale without
some due diligence of verification.
If you say "You can't list below the 6 month average", if I was a scammer,
I'd say "Ok", and list at the average or just slightly above, and then offer
free shipping.
Honestly, I'd be suspicious of anyone coming to BL on day one, setting up
a store, listing things without asking questions or taking the time to read
all the help files. Not like it's impossible, but..
|
|
| Author: | StarBrick | | Posted: | Oct 29, 2014 09:33 | | Subject: | Re: Stop Bogus Sellers | | Viewed: | 49 times | | Topic: | Suggestions | |
|
Easy, follow up fast on this kind of notification. BUT: report them through HelpDesk
and NOT only in the forum. The forum gets far less attention by CS than the HelpDesk
calls!
|
|
| Author: | cjgordon926 | | Posted: | Oct 29, 2014 09:24 | | Subject: | Re: Stop Bogus Sellers | | Viewed: | 63 times | | Topic: | Suggestions | |
| In Suggestions, Rick83 writes:
| | I'm very annoyed with bogus sellers appeared in the last month in Spain,
Portugal, Gibraltar, Andorra and southern France. Bricklink administrators don't
work actively to stop this problem. There are at least 3 seller in this moment
offering rare sets with low prices. With 0 feedbacks and they just been registered.
These sellers are very suspicious.
This kind of scam are very pernicious for a good working in this marketplace,
Please stop this kind of activities.
|
How would they do that?? Since everyone starts on BL with a "0" feedback score
there is no way to tell who is truly a AFOL or a scammer. They also don't
have the time or resources to monitor every item that every seller has listed
for sale in their inventory and at what price.
I do agree that something needs to be done about the large number of scammers
that do seem to be appearing lately but the question is how??
Maybe set up a system that monitors new sellers with a feedback score of, lets
say, 25 or less and has items (or sets) at a price set below the 6 month average??
I'm not a programmer so I don't know if that would even be possible.
CJ.
|
|
| Author: | Brickwilbo | | Posted: | Oct 29, 2014 09:24 | | Subject: | Re: Stop Bogus Sellers | | Viewed: | 61 times | | Topic: | Suggestions | |
| In Suggestions, Rick83 writes:
| | I'm very annoyed with bogus sellers appeared in the last month in Spain,
Portugal, Gibraltar, Andorra and southern France. Bricklink administrators don't
work actively to stop this problem. There are at least 3 seller in this moment
offering rare sets with low prices. With 0 feedbacks and they just been registered.
These sellers are very suspicious.
This kind of scam are very pernicious for a good working in this marketplace,
Please stop this kind of activities.
|
Report them here: http://www.bricklink.com/problemMember.asp
|
|
| Author: | Galegory_bcn | | Posted: | Oct 29, 2014 09:19 | | Subject: | Stop Bogus Sellers | | Viewed: | 262 times | | Topic: | Suggestions | | Status: | Discarded | |
| I'm very annoyed with bogus sellers appeared in the last month in Spain,
Portugal, Gibraltar, Andorra and southern France. Bricklink administrators don't
work actively to stop this problem. There are at least 3 seller in this moment
offering rare sets with low prices. With 0 feedbacks and they just been registered.
These sellers are very suspicious.
This kind of scam are very pernicious for a good working in this marketplace,
Please stop this kind of activities.
|
|
| Author: | peter_heyden | | Posted: | Oct 29, 2014 07:11 | | Subject: | Inventory Change Request for Set 2022-1 | | Viewed: | 51 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 31005pb05 Red Primo Brick, Round Rattle 1 x 1 with Ladybug Pattern
* Change 1 Gear Yellow pri057 Primo Storage Elephant {match ID 0 to 1}
Comments from Submitter:
The rattle brick isn't included in this set. The elephants nose seems to have one, but that's a similar brick without the rattle, with with a rope to pull the elephant.
The elephant comes with and without bow tie. I just entered a new item (gear) for the elephant with bow tie. However I can add the item only after it is approved. I'll do that right after approval.
Please consider the lid and elephant to be catalogued as parts in stead of gears. Other Primo elements (e.g. some storage form lids) are listed as parts. In that case, it would be possible to add an assembly for the elephant plus lid, as a "Ride on elephant".
|
|
| Author: | crepundi | | Posted: | Oct 29, 2014 04:39 | | Subject: | Inventory Change Request for Set 1702-1 | | Viewed: | 48 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 3962a Black Minifig, Utensil Radio with Compact Handle
* Add 1 Part 3962b Black Minifig, Utensil Radio with Extended Handle
Comments from Submitter:
Compact handle not compatible with part 4085c (thick U-clip).
|
|
| Author: | therobo | | Posted: | Oct 28, 2014 20:59 | | Subject: | Re: Expand est. shopping cart weight description | | Viewed: | 32 times | | Topic: | Suggestions | |
| In Suggestions, bricksahead writes:
| | I just looked at an order that was placed in my store. It is correct that the
item for which there is no weight in the catalog is marked with a "?" on the
order page. In the line "Estimated Weight of Order:" there is no indication that
the displayed weight excludes the weight for that one item, and as such is invalid.
|
You need to look at the shopping cart.
Example:
My Shopping Cart contains 6 Items in 6 Lots totalling EUR 59.95
Estimated Weight of 4(bold red font) Lots in My Shopping Cart:
bold red font: 1lbs 0.58oz 470.00g
red font: (not included are 2(bold red font) lots with unknown
weight shown with ? above)
| |
In Suggestions, therobo writes:
| | In Suggestions, bricksahead writes:
| | Thank you for your suggestion! I voted yes.
Please also state in words if the displayed weight does *not* include all items
in the cart, and add parentheses around the displayed weight, and "Weight missing"
or "?" for an item that is missing a weight in the catalog.
Example of text: "Note that the shopping cart weight is valid for only 7 of 9
items in the shopping cart.
|
Already exists.
| |
In Suggestions, enig writes:
| | 1) please expand the description of the shopping cart weight, for it to be clear
that it is not the SHIPPING weight.
"Please be aware that the estimated weight may be inaccurate. Allow some weight
for packaging materials. Do not stare at this warning too long to avoid damage
to your eyesight" Or whatever.
2) please make it in bold
3) please make it in red
4) please make it 3 TIMES THE REGULAR SHIFT
5) Rename "Shopping Cart" to "My Bucket"
Dont ask me how it works, but every now and then some buyers think that I can
pack their order using 0.03 grams worth of packaging material
http://www.bricklink.com/message.asp?ID=864716
This site improvement will, literally, take only a few minutes. But will make
many sellers eternally grateful.
Thanks!
P.S. excuse my tone. Now I feel much better.
|
|
|
|
|
|
| Author: | VVV | | Posted: | Oct 28, 2014 17:50 | | Subject: | Inventory Change Request for Set 6270-1 | | Viewed: | 36 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {2 to 1} Part Black 2420 Plate 2 x 2 Corner
Comments from Submitter:
can not for find this second corner piece in the drawings
|
| Author: | kvanroon | | Posted: | Oct 28, 2014 14:21 | | Subject: | Inventory Change Request for Set 79018-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part {Trans-Light Blue to Trans-Dark Blue} 30153 Rock 1 x 1 Jewel 24 Facet
Comments from Submitter:
Found the trans-dark blue not a trans-light blue in the set I parting out.
|
|
| Author: | bricksahead | | Posted: | Oct 28, 2014 13:59 | | Subject: | Re: Expand est. shopping cart weight description | | Viewed: | 34 times | | Topic: | Suggestions | |
| I just looked at an order that was placed in my store. It is correct that the
item for which there is no weight in the catalog is marked with a "?" on the
order page. In the line "Estimated Weight of Order:" there is no indication that
the displayed weight excludes the weight for that one item, and as such is invalid.
In Suggestions, therobo writes:
| | In Suggestions, bricksahead writes:
| | Thank you for your suggestion! I voted yes.
Please also state in words if the displayed weight does *not* include all items
in the cart, and add parentheses around the displayed weight, and "Weight missing"
or "?" for an item that is missing a weight in the catalog.
Example of text: "Note that the shopping cart weight is valid for only 7 of 9
items in the shopping cart.
|
Already exists.
| |
In Suggestions, enig writes:
| | 1) please expand the description of the shopping cart weight, for it to be clear
that it is not the SHIPPING weight.
"Please be aware that the estimated weight may be inaccurate. Allow some weight
for packaging materials. Do not stare at this warning too long to avoid damage
to your eyesight" Or whatever.
2) please make it in bold
3) please make it in red
4) please make it 3 TIMES THE REGULAR SHIFT
5) Rename "Shopping Cart" to "My Bucket"
Dont ask me how it works, but every now and then some buyers think that I can
pack their order using 0.03 grams worth of packaging material
http://www.bricklink.com/message.asp?ID=864716
This site improvement will, literally, take only a few minutes. But will make
many sellers eternally grateful.
Thanks!
P.S. excuse my tone. Now I feel much better.
|
|
|
|
|
| Author: | therobo | | Posted: | Oct 28, 2014 12:08 | | Subject: | Re: Expand est. shopping cart weight description | | Viewed: | 58 times | | Topic: | Suggestions | |
| In Suggestions, bricksahead writes:
| | Thank you for your suggestion! I voted yes.
Please also state in words if the displayed weight does *not* include all items
in the cart, and add parentheses around the displayed weight, and "Weight missing"
or "?" for an item that is missing a weight in the catalog.
Example of text: "Note that the shopping cart weight is valid for only 7 of 9
items in the shopping cart.
|
Already exists.
| |
In Suggestions, enig writes:
| | 1) please expand the description of the shopping cart weight, for it to be clear
that it is not the SHIPPING weight.
"Please be aware that the estimated weight may be inaccurate. Allow some weight
for packaging materials. Do not stare at this warning too long to avoid damage
to your eyesight" Or whatever.
2) please make it in bold
3) please make it in red
4) please make it 3 TIMES THE REGULAR SHIFT
5) Rename "Shopping Cart" to "My Bucket"
Dont ask me how it works, but every now and then some buyers think that I can
pack their order using 0.03 grams worth of packaging material
http://www.bricklink.com/message.asp?ID=864716
This site improvement will, literally, take only a few minutes. But will make
many sellers eternally grateful.
Thanks!
P.S. excuse my tone. Now I feel much better.
|
|
|
|
| Author: | BLUSER_476526 | | Posted: | Oct 28, 2014 12:01 | | Subject: | Re: Expand est. shopping cart weight description | | Viewed: | 48 times | | Topic: | Suggestions | |
| In Suggestions, bricksahead writes:
| | Thank you for your suggestion! I voted yes.
Please also state in words if the displayed weight does *not* include all items
in the cart, and add parentheses around the displayed weight, and "Weight missing"
or "?" for an item that is missing a weight in the catalog.
Example of text: "Note that the shopping cart weight is valid for only 7 of 9
items in the shopping cart.
In Suggestions, enig writes:
| | 1) please expand the description of the shopping cart weight, for it to be clear
that it is not the SHIPPING weight.
"Please be aware that the estimated weight may be inaccurate. Allow some weight
for packaging materials. Do not stare at this warning too long to avoid damage
to your eyesight" Or whatever.
2) please make it in bold
3) please make it in red
4) please make it 3 TIMES THE REGULAR SHIFT
5) Rename "Shopping Cart" to "My Bucket"
Dont ask me how it works, but every now and then some buyers think that I can
pack their order using 0.03 grams worth of packaging material
http://www.bricklink.com/message.asp?ID=864716
This site improvement will, literally, take only a few minutes. But will make
many sellers eternally grateful.
Thanks!
P.S. excuse my tone. Now I feel much better.
|
|
I agree with these suggestions. I also think it should not be allowed to turn
off all the weight information by a seller. Make it obvious that there is additional
weight to any order shipped for novice buyers.
|
|
| Author: | bricksahead | | Posted: | Oct 28, 2014 11:39 | | Subject: | Re: Expand est. shopping cart weight description | | Viewed: | 51 times | | Topic: | Suggestions | |
| Thank you for your suggestion! I voted yes.
Please also state in words if the displayed weight does *not* include all items
in the cart, and add parentheses around the displayed weight, and "Weight missing"
or "?" for an item that is missing a weight in the catalog.
Example of text: "Note that the shopping cart weight is valid for only 7 of 9
items in the shopping cart.
In Suggestions, enig writes:
| | 1) please expand the description of the shopping cart weight, for it to be clear
that it is not the SHIPPING weight.
"Please be aware that the estimated weight may be inaccurate. Allow some weight
for packaging materials. Do not stare at this warning too long to avoid damage
to your eyesight" Or whatever.
2) please make it in bold
3) please make it in red
4) please make it 3 TIMES THE REGULAR SHIFT
5) Rename "Shopping Cart" to "My Bucket"
Dont ask me how it works, but every now and then some buyers think that I can
pack their order using 0.03 grams worth of packaging material
http://www.bricklink.com/message.asp?ID=864716
This site improvement will, literally, take only a few minutes. But will make
many sellers eternally grateful.
Thanks!
P.S. excuse my tone. Now I feel much better.
|
|
|
| Author: | enig | | Posted: | Oct 28, 2014 11:07 | | Subject: | Expand est. shopping cart weight description | | Viewed: | 124 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| 1) please expand the description of the shopping cart weight, for it to be clear
that it is not the SHIPPING weight.
"Please be aware that the estimated weight may be inaccurate. Allow some weight
for packaging materials. Do not stare at this warning too long to avoid damage
to your eyesight" Or whatever.
2) please make it in bold
3) please make it in red
4) please make it 3 TIMES THE REGULAR SHIFT
5) Rename "Shopping Cart" to "My Bucket"
Dont ask me how it works, but every now and then some buyers think that I can
pack their order using 0.03 grams worth of packaging material
http://www.bricklink.com/message.asp?ID=864716
This site improvement will, literally, take only a few minutes. But will make
many sellers eternally grateful.
Thanks!
P.S. excuse my tone. Now I feel much better.
|
|
| Author: | cosmicray | | Posted: | Oct 28, 2014 08:24 | | Subject: | Re: Please split PayPal by seller/buyer country | | Viewed: | 38 times | | Topic: | Suggestions | |
| In Suggestions, cosmicray writes:
| | In Suggestions, cosmicray writes:
| | In Suggestions, cosmicray writes:
| | Please make PayPal acceptance into two types (either of which the seller can
specify).
One would be 'seller accepts PayPal from buyer's country'
The other would be 'seller accepts PayPal from seller's country'
The first indicates that you accept cross-border PayPal, the second says you
do not.
This suggestion is a result of a growing number of orders that I have received,
where the buyer is physically in another country, has a US based re-shipper specified
as the buyer's address, but wants to pay with cross-border PayPal. Buyers
are using the address field to try to circumvent the country list that the seller
will ship to, when in reality the situation is more than where the seller ships
to, it is also a cross-border payment issue.
Thank you.
|
Bumping this because another order arrived today with the same issue. This buyer
has already placed one unsuccessful order with me, so now I'm stoplisting
to prevent repeats.
|
Another buyer, same problem. This buyer based in Korea, using US shipping address,
but not able to pay with US PayPal. 3 of last 6 orders all failed for this reason.
It took 3 comms and an OCR to get this buyer to respond, and then only because
I went to Google Translate to get their attention (in Korean). They responded
back in English.
|
Bumping again, because order 4794088 canceled for the same reason.
|
|
| Author: | bb309036 | | Posted: | Oct 28, 2014 07:39 | | Subject: | My Orders Settings/Sort Orders Received Items | | Viewed: | 71 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| Hi there,
MY SUGGESTION IS TO MAKE IT POSSIBLE TO SORT "PARTS", "INSTRUCTIONS", "SETS",
... INDEPENDENTLY IN "ORDERS = MY SETTINGS"
Explanation:
the parts you can buy in our store are sorted by
"Category Name, Item Name, Color Name"
in our shelves and cartons.
the insturctions and sets you can buy in our store are sorted by
"Item No"
in our binders and cartons.
I think this is obvious because:
- if you see an item you think "okay, that's a "Brick, Modified ... but I
don't know the number"
- if you see an instruction you think/see "okay, that's 1234 but I don't
know its name/description"
As far as I know it isn't possible to sort "parts" and "instructions", sets",
... independently in "Orders = My Settings"
We have chosen "Category Name, Item Name, Color Name, Comments".
Problem: if there are many instructions in a received order we could collect
them far faster if they would be sorted by "Item No" in the "Order Detail".
So my suggestion is to make it possible to sort "parts", "instructions", "sets",
... independently in "Orders = My Settings"
What do other sellers think about this problem? How do you solve it?
Warm regards,
Happy Brixx
|
|
| Author: | sonnich | | Posted: | Oct 28, 2014 03:57 | | Subject: | Comments in HTML in splash page | | Viewed: | 86 times | | Topic: | Suggestions | | Status: | Discarded | |
| at some point the splash page was limited to certain tags - and the comment was
not one of them (adding it here will make is disappear)
howevere, look at my splash and you can see my point:
http://www.bricklink.com/store.asp?p=sonnich
could the comment be added, or is there a way to have those "headers" and "out
of office" in there for my own use?
I posted this in help too
|
| Author: | LordSkylark | | Posted: | Oct 27, 2014 19:58 | | Subject: | Inventory Change Request for Set 70008-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Dark Bluish Gray {3048 Slope 45 2 x 1 Triple to 3048c Slope 45 2 x 1 Triple - with Inside Bar}
|
|
| Author: | unicron51 | | Posted: | Oct 27, 2014 14:48 | | Subject: | Inventory Change Request for Set 8733-1 | | Viewed: | 25 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 4 Part {Flat Silver to Pearl Light Gray} 111 Technic, Pin Connector 3 x 3 with Axle {Regular to Alternate}
Comments from Submitter:
This part exists in Pearl Light Grey, and this is the only set it could've come with in this color. The logical explanation is that later runs of this set had this part and the figure's mask molded in Pearl Light Grey rather than Flat Silver. I don't own the set to confirm the mask color, though.
|
| Author: | bic3 | | Posted: | Oct 27, 2014 08:26 | | Subject: | Inventory Change Request for Set 60036-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {8 to 6} Part White 3460 Plate 1 x 8
|
|
| Author: | happygolucky | | Posted: | Oct 27, 2014 05:16 | | Subject: | Inventory Change Request for Set 79115-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 87552pb021 Trans-Black Panel 1 x 2 x 2 with Side Supports - Hollow Studs with Black Pentagonal Window on Olive Green Background Pattern (Sticker) - Set 79115 (Counterpart)
* Add 1 Part 2431pb362 White Tile 1 x 4 with 'ANJ 79115' License Plate Pattern (Sticker) - Set 79115 (Counterpart)
* Add 1 Part 87079pb191 Light Bluish Gray Tile 2 x 4 with 'S' in Dark Red Square, 'WARNING', 'PRIVATE PROPERTY' and 'KEEP OUT' Pattern (Sticker) - Set 7 (Counterpart)
* Add 2 Part 6180pb077 Black Tile, Modified 4 x 6 with Studs on Edges with Scratched Yellow Hegagons on Olive Green Background Pattern (Sticker) - Set 79115 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
| Author: | happygolucky | | Posted: | Oct 27, 2014 05:12 | | Subject: | Inventory Change Request for Set 79119-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 46212pb002L Trans-Neon Green Brick 1 x 2 x 5 without Side Supports with Lime Bubbles Pattern Left (Sticker) - Set 79119 (Counterpart)
* Add 1 Part 46212pb002R Trans-Neon Green Brick 1 x 2 x 5 without Side Supports with Lime Bubbles Pattern Right (Sticker) - Set 79119 (Counterpart)
* Add 1 Part 30562pb033L Trans-Neon Green Cylinder Quarter 4 x 4 x 6 with Lime Bubbles Pattern Left (Stickers) - Set 79119 (Counterpart)
* Add 1 Part 30562pb033R Trans-Neon Green Cylinder Quarter 4 x 4 x 6 with Lime Bubbles Pattern Right (Stickers) - Set 79119 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
| Author: | Proprietor | | Posted: | Oct 26, 2014 18:56 | | Subject: | Inventory Change Request for Set 8155-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3008pb138 Red Brick 1 x 8 with Ferrari Logo and 'SF SCUDERIA FERRARI' Pattern (Sticker) - (Sets 8153/8155) (Counterpart)
|
| Author: | Proprietor | | Posted: | Oct 26, 2014 18:55 | | Subject: | Inventory Change Request for Set 8153-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3008pb138 Red Brick 1 x 8 with Ferrari Logo and 'SF SCUDERIA FERRARI' Pattern (Sticker) - (Sets 8153/8155) (Counterpart)
|
|
| Author: | randyf | | Posted: | Oct 26, 2014 18:46 | | Subject: | Re: Inventory Change Request for Set 41045-1 | | Viewed: | 23 times | | Topic: | Inventories Requests | |
| In Inventories Requests, FelipeVinhao writes:
| | Please make changes to the following inventory:
* Delete 1 Part 88704 Green Minifig, Weapon Whip Bent (Extra)
Comments from Submitter:
The extra green whip isn't added to the package. Just checked by opening a sealed set. Please note that I only opened one set.
|
http://www.bricklink.com/message.asp?ID=858664
The user in that thread is usually very accurate with their changes, so I would
think it is correct and should not be deleted.
Cheers,
Randy
|
|
| Author: | Mardosul | | Posted: | Oct 26, 2014 16:32 | | Subject: | Inventory Change Request for Set 10241-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {2 to 12} Part Dark Red 3023 Plate 1 x 2
Comments from Submitter:
Not 2 plates dark red 1 x 2 but instead 12 plates dark red 1 x 2
|
| Author: | FelipeVinhao | | Posted: | Oct 26, 2014 14:20 | | Subject: | Inventory Change Request for Set 41045-1 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 88704 Green Minifig, Weapon Whip Bent (Extra)
Comments from Submitter:
The extra green whip isn't added to the package. Just checked by opening a sealed set. Please note that I only opened one set.
|
|
| Author: | jennnifer | | Posted: | Oct 25, 2014 18:13 | | Subject: | Re: Inventory Change Request for Set 79018-1 | | Viewed: | 36 times | | Topic: | Inventories Requests | |
| In Inventories Requests, BigBBricks writes:
| | Please make changes to the following inventory:
* Delete 2 Part 98138pb024 Trans-Clear Tile, Round 1 x 1 with Octagon (Arkenstone) Pattern
* Delete 2 Part 95673 Flat Silver Minifig, Weapon Sword, Roman Gladius
Comments from Submitter:
For 594095 there are two per set, one used per directions and one extra. The way it is listed it has 1 as extra and 2 as used.
For 594265 this is only in Pearl Dk Grey, not in both colors.
Additionally, the weapons in this set are not entered correctly. For instance, only 3 swords are used per directions and 3 are extra. Same goes for the axe head.
|
Hello,
Thank you for posting this request. I have corrected the quantity of part 98138pb024.
However, the 2 Flat Silver 95673 are shown to be used in the instructions on
page 125. They are Fili's weapons. The weapons the minifigs hold in the instructions
are correctly listed in the Regular inventory. This would account for the axe
heads as well.
Thank you,
Jen
|
|
| Author: | BigBBricks | | Posted: | Oct 25, 2014 17:10 | | Subject: | Inventory Change Request for Set 79018-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 2 Part 98138pb024 Trans-Clear Tile, Round 1 x 1 with Octagon (Arkenstone) Pattern
* Delete 2 Part 95673 Flat Silver Minifig, Weapon Sword, Roman Gladius
Comments from Submitter:
For 594095 there are two per set, one used per directions and one extra. The way it is listed it has 1 as extra and 2 as used.
For 594265 this is only in Pearl Dk Grey, not in both colors.
Additionally, the weapons in this set are not entered correctly. For instance, only 3 swords are used per directions and 3 are extra. Same goes for the axe head.
|
|
| Author: | paulvdb | | Posted: | Oct 25, 2014 07:08 | | Subject: | Inventory Change Request for Set 7346-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4085b Light Bluish Gray Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (Alternate) (match ID 3)
* Change 1 Part Light Bluish Gray 4085d Plate, Modified 1 x 1 with Clip Vertical - Type 4 (thick open O clip) {match ID 0 to 3}
Comments from Submitter:
I found 4085b in some of the sets that I am parting out.
|
|
| Author: | paulvdb | | Posted: | Oct 25, 2014 03:42 | | Subject: | Inventory Change Request for Set 7346-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 6 Part 15332 White Fence Spindled 1 x 4 x 2 with 4 Studs (Alternate) (match ID 2)
* Change 6 Part White 30055 Fence Spindled 1 x 4 x 2 with 2 Studs {match ID 0 to 2}
Comments from Submitter:
I found the variant with 4 studs in some of the sets that I am parting out.
|
|
| Author: | enig | | Posted: | Oct 24, 2014 16:11 | | Subject: | Inventory Change Request for Set 8558-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 6 Part x37 Green Rubber Belt Medium (Round Cross Section) - Approx. 3 x 3 (Alternate) (match ID 2)
* Change 6 Part Bright Green x37 Rubber Belt Medium (Round Cross Section) - Approx. 3 x 3 {match ID 0 to 2}
Comments from Submitter:
sealed set contents. Thanks!
|
| Author: | rangeboy | | Posted: | Oct 23, 2014 19:49 | | Subject: | Inventory Change Request for Set 6087-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30102 Dark Gray Door 2 x 5 x 5 Swivel, Flat Base
Comments from Submitter:
Found it was this item instead.
|
| Author: | rangeboy | | Posted: | Oct 23, 2014 19:47 | | Subject: | Inventory Change Request for Set 6087-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 40249 Dark Gray Door 2 x 5 x 5 Swivel, Bracket Base
Comments from Submitter:
Found in a picture of the instructions that it wasn´t item nr 40249 in this set, but the item nr 30102. http://cache.lego.com/bigdownloads/buildinginstructions/4105780.pdf
|
|
| Author: | calsbricks | | Posted: | Oct 23, 2014 14:18 | | Subject: | Inventory Change Request for Set 7778-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 60470b Black Plate, Modified 1 x 2 with Clips Horizontal (open O clips) (Alternate)
* Add 1 Part 32064 Red Technic, Brick 1 x 2 with Axle Hole (Alternate)
Comments from Submitter:
Have parted out 2 of these today and found these to be the parts supplied by Lego.
|
|
| Author: | randyf | | Posted: | Oct 23, 2014 13:51 | | Subject: | Inventory Change Request for Set 6817-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part Black {3475 Engine, Smooth Small, 1 x 2 Side Plate (Undetermined Axle Holders Type) to 3475b Engine, Smooth Small, 1 x 2 Side Plate with Axle Holders}
Comments from Submitter:
From sealed set contents.
|
|
| Author: | randyf | | Posted: | Oct 23, 2014 13:16 | | Subject: | Re: Inventory Change Request for Set 75043-1 | | Viewed: | 34 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| | Please make changes to the following inventory:
* Add 2 Part 4150pb167 Tan Tile, Round 2 x 2 with Dark Red SW Semicircles on Tan Background Pattern (Sticker) - Set 75043 (Counterpart)
Comments from Submitter:
and accept this change http://www.bricklink.com/message.asp?ID=859855
|
Thanks Marek for getting these fixed up!
Cheers,
Randy
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
