Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | hazelsden  | | Posted: | Apr 20, 2014 13:06 | | Subject: | Re: Inventory Change Request for Set 30227-1 | | Viewed: | 64 times | | Topic: | Inventories Requests | |
| In Inventories Requests, jody166 writes:
| | Please make changes to the following inventory:
* Add 1 Part 11303 Dark Blue Minifig, Headgear Cap - Short Curved Bill with Seams and Hole on Top
* Add 1 Part 973pb1547c01 Dark Blue Torso Police Jacket with White Undershirt, Zippers, Gold Badge and Buckle with 'POLICE' Pattern on Back / Dark Blue Arms / Dark Bluish Gray Ha
* Add 1 Part 92590 Dark Tan Minifig, Backpack Open
* Add 1 Part 970c00 Dark Blue Hips and Legs
* Add 1 Part 970c00 Dark Bluish Gray Hips and Legs
* Add 1 Part 41334 Dark Bluish Gray Minifig, Headgear Cap, Knit
* Add 1 Part 3626cpb495 Yellow Minifig, Head Beard Stubble, Brown Eyebrows, Crooked Smile, White Pupils and Scar Pattern - Stud Recessed
* Add 1 Part 973pb1557c01 White Torso Town Prisoner Number 86753, Dark Bluish Gray Stripes, Buttons, Hairy Chest Pattern / White Arms / Yellow Hands
* Add 1 Part 97895 Yellow Minifig, Life Jacket, Center Buckle
* Add 1 Part 3626cpb810 Yellow Minifig, Head Black and Tan Eyebrows, White Pupils, Cheek Lines Pattern - Stud Recessed
Comments from Submitter:
needs whole minifigs as well
|
This Inventory Change Request is being denied/rejected because -
The parts for minifigs are not added to the set inventory. The minifig is added
to the set inventory - the minifig has its own inventory. Standards to inventory
a set and a minifig follows -
http://www.bricklink.com/help.asp?helpID=199 and http://www.bricklink.com/help.asp?helpID=200
Adding catalog items -
http://www.bricklink.com/help.asp?helpID=71
HTH
Hazel
Inv. Admin.
|
 |
| Author: | sebaman74 | | Posted: | Apr 19, 2014 23:34 | | Subject: | Re: Inventory Change Request for Set 30195-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| In Inventories Requests, starbeanie writes:
| | In Inventories Requests, sebaman74 writes:
| | Please make changes to the following inventory:
* Change {4 to 6} Part Red 4073 Plate, Round 1 x 1 Straight Side
Comments from Submitter:
This set inludes 6 Red Plates (Round 1 x 1) not 4.
The total number of pieces of this set is 53 not 51.
The source is a sealed set.
|
Correct. 2 in step 6, 2 in step 10, 2 in step 13.
http://cache.lego.com/bigdownloads/buildinginstructions/6019205.pdf
Bret
|
Thanks Bret!!!
|
|
| Author: | Nikilyn | | Posted: | Apr 19, 2014 20:58 | | Subject: | Inventory Change Request for Set 10662-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3794b Tan Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 3)
* Change 1 Part Tan 3794 Plate, Modified 1 x 2 with 1 Stud (Jumper) {match ID 0 to 3}
Comments from Submitter:
Half my sets had grooved version
|
| Author: | BLUSER_50130 | | Posted: | Apr 19, 2014 20:20 | | Subject: | Inventory Change Request for Set 30227-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Minifig cty463 Police - Jail Prisoner 86753 Prison Stripes, Dark Bluish Gray Knit Cap, Backpack, Crooked Smile
Comments from Submitter:
Also needs police figure which I have added to catalogue in request as well
|
|
| Author: | BLUSER_50130 | | Posted: | Apr 19, 2014 20:17 | | Subject: | Inventory Change Request for Set 30227-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 11303 Dark Blue Minifig, Headgear Cap - Short Curved Bill with Seams and Hole on Top
* Add 1 Part 973pb1547c01 Dark Blue Torso Police Jacket with White Undershirt, Zippers, Gold Badge and Buckle with 'POLICE' Pattern on Back / Dark Blue Arms / Dark Bluish Gray Ha
* Add 1 Part 92590 Dark Tan Minifig, Backpack Open
* Add 1 Part 970c00 Dark Blue Hips and Legs
* Add 1 Part 970c00 Dark Bluish Gray Hips and Legs
* Add 1 Part 41334 Dark Bluish Gray Minifig, Headgear Cap, Knit
* Add 1 Part 3626cpb495 Yellow Minifig, Head Beard Stubble, Brown Eyebrows, Crooked Smile, White Pupils and Scar Pattern - Stud Recessed
* Add 1 Part 973pb1557c01 White Torso Town Prisoner Number 86753, Dark Bluish Gray Stripes, Buttons, Hairy Chest Pattern / White Arms / Yellow Hands
* Add 1 Part 97895 Yellow Minifig, Life Jacket, Center Buckle
* Add 1 Part 3626cpb810 Yellow Minifig, Head Black and Tan Eyebrows, White Pupils, Cheek Lines Pattern - Stud Recessed
Comments from Submitter:
needs whole minifigs as well
|
|
| Author: | TakeAbricK | | Posted: | Apr 19, 2014 13:09 | | Subject: | Inventory Change Request for Set 10675-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part White {52035c01 Motorcycle City, Complete Assembly with Black Chassis (Short Fairing Mounts) and Light Bluish Gray Wheels to 52035c02 Motorcycle City, Complete Assembly with Black Chassis (Long Fairing Mounts) and Light Bluish Gray Wheels} (Counterpart)
Comments from Submitter:
It's the one with the Long Fairing Mounts.
|
|
| Author: | TakeAbricK | | Posted: | Apr 19, 2014 12:38 | | Subject: | Inventory Change Request for Set 41041-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3957 Reddish Brown Antenna 1 x 4 (Alternate) (match ID 2)
* Change 1 Part Reddish Brown 3957b Antenna 1 x 4 - Flat Top {match ID 0 to 2}
Comments from Submitter:
2 out of 6 have rounded Top
|
| Author: | MadAboutBricks | | Posted: | Apr 19, 2014 11:43 | | Subject: | Inventory Change Request for Set 79003-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {3 to 2} Part Reddish Brown 4073 Plate, Round 1 x 1 Straight Side (Extra)
Comments from Submitter:
Based on 4 sets parted out
|
|
| Author: | piecemeal | | Posted: | Apr 19, 2014 10:48 | | Subject: | Inventory Change Request for Set 10211-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4865b Trans-Black Panel 1 x 2 x 1 with Rounded Corners (Alternate) (match ID 19)
* Add 1 Part 3024 Dark Red Plate 1 x 1 (Extra)
* Add 2 Part 3024 Tan Plate 1 x 1 (Extra)
* Add 3 Part 3024 Dark Tan Plate 1 x 1 (Extra)
* Add 1 Part 3024 Trans-Green Plate 1 x 1 (Extra)
* Add 1 Part 3024 Trans-Yellow Plate 1 x 1 (Extra)
* Add 3 Part 3024 White Plate 1 x 1 (Extra)
* Add 2 Part 3024 Yellow Plate 1 x 1 (Extra)
* Change 1 Part Trans-Black 4865 Panel 1 x 2 x 1 {match ID 0 to 19}
|
|
| Author: | paulvdb | | Posted: | Apr 19, 2014 09:46 | | Subject: | Inventory Change Request for Set 10218-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4865b Trans-Black Panel 1 x 2 x 1 with Rounded Corners (Alternate) (match ID 31)
* Change 1 Part Trans-Black 4865 Panel 1 x 2 x 1 {match ID 0 to 31}
Comments from Submitter:
I found 4865b in sets that I am parting out.
|
| Author: | BLUSER_478021 | | Posted: | Apr 19, 2014 03:22 | | Subject: | Inventory Change Request for Set 5419-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 5 Part 3011 Yellow Duplo, Brick 2 x 4
|
| Author: | randyf | | Posted: | Apr 18, 2014 18:54 | | Subject: | Inventory Change Request for Set 10674-1 | | Viewed: | 23 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Orange 96874 Human Tool, Brick and Axle Separator {Regular to Extra}
|
| Author: | randyf | | Posted: | Apr 18, 2014 18:52 | | Subject: | Inventory Change Request for Set 30247-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part White {3070 Tile 1 x 1 (undetermined type) to 3070b Tile 1 x 1 with Groove}
* Change 1 Part White {3070 Tile 1 x 1 (undetermined type) to 3070b Tile 1 x 1 with Groove} (Extra)
|
| Author: | starbeanie | | Posted: | Apr 18, 2014 15:08 | | Subject: | Inventory Change Request for Set 979760-1 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Gear bin03 Bright Green Dacta Storage Bin Large (Alternate) (match ID 1)
* Change 1 Gear Blue bin03 Dacta Storage Bin Large {match ID 0 to 1}
Comments from Submitter:
Mine came with the bright green tub not blue.
|
|
| Author: | bb459958 | | Posted: | Apr 18, 2014 11:25 | | Subject: | Re: Price and Sale Trends | | Viewed: | 34 times | | Topic: | Suggestions | |
| In Suggestions, jamesuniverse writes:
| | In Suggestions, Stragus writes:
| | In Suggestions, Loremonger writes:
| | A useful Price Guide feature would be price and sale trends in a graph. Similar
to what you find on Swappa (see attached).
This would be especially useful for new parts and minifigs as they settle into
their natural supply-and-demand averages. It would also be helpful to have a
visual on how prices for old parts behave when new sets hit the market containing
parts that haven't been available retail for a while.
|
Would love that feature. It's possible to get the information for the past
6 months by parsing the whole price guide page (catalogPG.asp, not priceGuide.asp),
but this generates far more traffic than necessary...
Looking back 2-3 years would be interesting too.
|
More than just that. How about not purge data 7 months old..... Is it really
that big of a deal to extend to a year or two?
~JU
|
Or more...
|
|
| Author: | bb459958 | | Posted: | Apr 18, 2014 11:24 | | Subject: | Re: Price and Sale Trends | | Viewed: | 28 times | | Topic: | Suggestions | |
| In Suggestions, Loremonger writes:
| | A useful Price Guide feature would be price and sale trends in a graph. Similar
to what you find on Swappa (see attached).
This would be especially useful for new parts and minifigs as they settle into
their natural supply-and-demand averages. It would also be helpful to have a
visual on how prices for old parts behave when new sets hit the market containing
parts that haven't been available retail for a while.
Enoch
|
Voted yes. That would really be helpful for... Well, the reasons you mentioned.
|
|
| Author: | 1977_mauro | | Posted: | Apr 18, 2014 11:17 | | Subject: | Inventory Change Request for Set 10131-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4073 Trans-Neon Green Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4073 Trans-Red Plate, Round 1 x 1 Straight Side (Extra)
* Add 1 Part 4274 Light Bluish Gray Technic, Pin 1/2 (Extra)
* Change {5 to 4} Part Trans-Neon Green 4073 Plate, Round 1 x 1 Straight Side
* Change {19 to 18} Part Trans-Red 4073 Plate, Round 1 x 1 Straight Side
* Change {4 to 3} Part Light Bluish Gray 4274 Technic, Pin 1/2
|
|
| Author: | jamesuniverse | | Posted: | Apr 18, 2014 11:12 | | Subject: | Re: Price and Sale Trends | | Viewed: | 34 times | | Topic: | Suggestions | |
| In Suggestions, Stragus writes:
| | In Suggestions, Loremonger writes:
| | A useful Price Guide feature would be price and sale trends in a graph. Similar
to what you find on Swappa (see attached).
This would be especially useful for new parts and minifigs as they settle into
their natural supply-and-demand averages. It would also be helpful to have a
visual on how prices for old parts behave when new sets hit the market containing
parts that haven't been available retail for a while.
|
Would love that feature. It's possible to get the information for the past
6 months by parsing the whole price guide page (catalogPG.asp, not priceGuide.asp),
but this generates far more traffic than necessary...
Looking back 2-3 years would be interesting too.
|
More than just that. How about not purge data 7 months old..... Is it really
that big of a deal to extend to a year or two?
~JU
|
|
| Author: | bb138026 | | Posted: | Apr 18, 2014 11:10 | | Subject: | Re: Price and Sale Trends | | Viewed: | 31 times | | Topic: | Suggestions | |
| In Suggestions, Loremonger writes:
| | A useful Price Guide feature would be price and sale trends in a graph. Similar
to what you find on Swappa (see attached).
This would be especially useful for new parts and minifigs as they settle into
their natural supply-and-demand averages. It would also be helpful to have a
visual on how prices for old parts behave when new sets hit the market containing
parts that haven't been available retail for a while.
|
Would love that feature. It's possible to get the information for the past
6 months by parsing the whole price guide page (catalogPG.asp, not priceGuide.asp),
but this generates far more traffic than necessary...
Looking back 2-3 years would be interesting too.
|
|
| Author: | Loremonger | | Posted: | Apr 18, 2014 10:57 | | Subject: | Price and Sale Trends | | Viewed: | 153 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| A useful Price Guide feature would be price and sale trends in a graph. Similar
to what you find on Swappa (see attached).
This would be especially useful for new parts and minifigs as they settle into
their natural supply-and-demand averages. It would also be helpful to have a
visual on how prices for old parts behave when new sets hit the market containing
parts that haven't been available retail for a while.
Enoch
|
|
|
| Author: | starbeanie | | Posted: | Apr 18, 2014 10:39 | | Subject: | Re: Inventory Change Request for Set 21102-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| In Inventories Requests, LordSkylark writes:
| | In Inventories Requests, starbeanie writes:
| | Please make changes to the following inventory:
* Add 1 Minifig min001 Minecraft Figure Micromob Creeper (Counterpart)
* Add 1 Minifig min002 Minecraft Figure Micromob Steve (Counterpart)
|
Just wondering, why are they added as counterparts?
When parting a set, counterparts cannot be broken up automatically -- but
if they are regular minifigures then someone can simply select to keep them as
figures or to part them out. Otherwise if someone is parting them out, they have
to manually check the inventory for every figure and manually delete every single
part.
Andy
|
Because for example "Steve" there are parts for a complete one but extra's
for part of one. We can let the Invmins decide how they prefer.
Bret
|
|
| Author: | LordSkylark | | Posted: | Apr 18, 2014 10:34 | | Subject: | Re: Inventory Change Request for Set 21102-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
| In Inventories Requests, starbeanie writes:
| | Please make changes to the following inventory:
* Add 1 Minifig min001 Minecraft Figure Micromob Creeper (Counterpart)
* Add 1 Minifig min002 Minecraft Figure Micromob Steve (Counterpart)
|
Just wondering, why are they added as counterparts?
When parting a set, counterparts cannot be broken up automatically -- but
if they are regular minifigures then someone can simply select to keep them as
figures or to part them out. Otherwise if someone is parting them out, they have
to manually check the inventory for every figure and manually delete every single
part.
Andy
|
|
| Author: | starbeanie | | Posted: | Apr 18, 2014 09:39 | | Subject: | Re: Inventory Change Request for Set 21105-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| In Inventories Requests, jamesuniverse writes:
| | In Inventories Requests, starbeanie writes:
| | Please make changes to the following inventory:
* Add 1 Minifig min003 Minecraft Figure Micromob Pig (Counterpart)
* Add 1 Minifig min004 Minecraft Figure Micromob Villager (Counterpart)
* Add 1 Minifig min005 Minecraft Figure Micromob Zombie (Counterpart)
|
Thank you for doing this! I may actually part out these sets now. 
~JU
|
The http://www.bricklink.com/catalogItem.asp?M=min007 is still pending but the
rest of them have been submitted to the inventories.
|
|
| Author: | jamesuniverse | | Posted: | Apr 18, 2014 09:35 | | Subject: | Re: Inventory Change Request for Set 21105-1 | | Viewed: | 12 times | | Topic: | Inventories Requests | |
| In Inventories Requests, starbeanie writes:
| | Please make changes to the following inventory:
* Add 1 Minifig min003 Minecraft Figure Micromob Pig (Counterpart)
* Add 1 Minifig min004 Minecraft Figure Micromob Villager (Counterpart)
* Add 1 Minifig min005 Minecraft Figure Micromob Zombie (Counterpart)
|
Thank you for doing this! I may actually part out these sets now.
~JU
|
| Author: | starbeanie | | Posted: | Apr 18, 2014 09:34 | | Subject: | Inventory Change Request for Set 21106-1 | | Viewed: | 13 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Minifig min006 Minecraft Figure Micromob Ghast (Counterpart)
|
| Author: | starbeanie | | Posted: | Apr 18, 2014 09:34 | | Subject: | Inventory Change Request for Set 21105-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Minifig min003 Minecraft Figure Micromob Pig (Counterpart)
* Add 1 Minifig min004 Minecraft Figure Micromob Villager (Counterpart)
* Add 1 Minifig min005 Minecraft Figure Micromob Zombie (Counterpart)
|
| Author: | starbeanie | | Posted: | Apr 18, 2014 09:32 | | Subject: | Inventory Change Request for Set 21102-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Minifig min001 Minecraft Figure Micromob Creeper (Counterpart)
* Add 1 Minifig min002 Minecraft Figure Micromob Steve (Counterpart)
|
|
| Author: | TakeAbricK | | Posted: | Apr 18, 2014 08:29 | | Subject: | Inventory Change Request for Set 75013-1 | | Viewed: | 19 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 553c Light Bluish Gray Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (match ID 3)
* Change 2 Part Light Bluish Gray 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {Regular to Alternate} {match ID 0 to 3}
Comments from Submitter:
Opened 2 sets, both have 553c.
|
|
| Author: | TakeAbricK | | Posted: | Apr 18, 2014 08:21 | | Subject: | Inventory Change Request for Set 10675-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 3 Part 30237 White Brick, Modified 1 x 2 with Vertical Clip (match ID 1)
* Change 3 Part White 30237b Brick, Modified 1 x 2 with Vertical Clip (thick open O clip) {Regular to Alternate} {match ID 0 to 1}
Comments from Submitter:
Opened 3 Sets, all 3 have 30237.
|
| Author: | elias3 | | Posted: | Apr 18, 2014 05:42 | | Subject: | Inventory Change Request for Set 60060-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb309 Light Bluish Gray Tile 1 x 2 with 'HA60060' Pattern (Sticker) - Set 60060 (Counterpart)
|
| Author: | happygolucky | | Posted: | Apr 18, 2014 05:38 | | Subject: | Inventory Change Request for Set 79118-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 42511pb09 Blue Minifig, Utensil Skateboard with Trolley Wheel Holders with Red Apple Pattern (Sticker) (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
| Author: | starbeanie | | Posted: | Apr 17, 2014 21:34 | | Subject: | Re: Inventory Change Request for Set 30195-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| In Inventories Requests, sebaman74 writes:
| | Please make changes to the following inventory:
* Change {4 to 6} Part Red 4073 Plate, Round 1 x 1 Straight Side
Comments from Submitter:
This set inludes 6 Red Plates (Round 1 x 1) not 4.
The total number of pieces of this set is 53 not 51.
The source is a sealed set.
|
Correct. 2 in step 6, 2 in step 10, 2 in step 13.
http://cache.lego.com/bigdownloads/buildinginstructions/6019205.pdf
Bret
|
|
| Author: | sebaman74 | | Posted: | Apr 17, 2014 21:06 | | Subject: | Inventory Change Request for Set 30195-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {4 to 6} Part Red 4073 Plate, Round 1 x 1 Straight Side
Comments from Submitter:
This set inludes 6 Red Plates (Round 1 x 1) not 4.
The total number of pieces of this set is 53 not 51.
The source is a sealed set.
|
|
| Author: | BLUSER_320453 | | Posted: | Apr 17, 2014 20:57 | | Subject: | Re: Allow buyers to cancel order under IRR* | | Viewed: | 67 times | | Topic: | Suggestions | |
| In Suggestions, enig writes:
| | In Suggestions, graphite37 writes:
| | In Suggestions, Rob_and_Shelagh writes:
| | In Suggestions, enig writes:
| | *IRR - Item Removal Request
Enable buyers to cancel the order(right away) with no penalty to them, when sellers
submit IRR. Most of the time few missing pieces is not an issue, but sometimes
those few pieces may be the whole reason for the order. Buyers should not be
forced to hold up their end of the deal, if sellers are not holding up theirs.
This would also take care of the issue when sellers remove lots from the order
under their own discretion, because they dont feel like filling some of them.
Filling the more expensive lots, but cancelling the smaller ones. In other words
- flipping their buyer off..
|
Buyer does have a legal right to cancel anyway in this case. If sellers are using
NPB in this case that is wrong and Admin should look into it, sellers should
not be trying to force buyers into buying a part order. We rarely use the IRR,
instead contact the buyer if we do not have exactly what they ordered due to
a stock error and ask them if they are still happy to continue with the order
or want us to take any other action. I can't believe many sellers would do
what you are suggesting but if they do I agree that needs to be stopped.
Robert
|
I do the same. I let them know what is missing, offer refund or alternate part
and tell them to let me know if they'd prefer to cancel the order.
|
Yes. But, apparently, that's not the practice that all are following
In order to move up in the queue I had to bring his order in to compliance
with
the terms by removing lots that did not comply.
http://www.bricklink.com/message.asp?ID=812692
not only this, but I also remember seeing some other sellers' terms that
they reserve the right to remove all lots smaller than X. It was not a single
store, I have seen it a few times..
|
By placing then order and agreeing to the store terms the buyers agree to have
the lots removed at the proprietors discretion. the above cases the buyer agreed
to have the items removed.
|
|
| Author: | miltonpita | | Posted: | Apr 17, 2014 20:43 | | Subject: | Inventory Change Request for Set 60004-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3794b Black Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 5)
|
| Author: | miltonpita | | Posted: | Apr 17, 2014 20:42 | | Subject: | Inventory Change Request for Set 60004-1 | | Viewed: | 17 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3794b Red Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 4)
|
| Author: | miltonpita | | Posted: | Apr 17, 2014 20:40 | | Subject: | Inventory Change Request for Set 60004-1 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 30237 Red Brick, Modified 1 x 2 with Vertical Clip (Alternate) (match ID 3)
|
| Author: | miltonpita | | Posted: | Apr 17, 2014 14:14 | | Subject: | Inventory Change Request for Set 60004-1 | | Viewed: | 18 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 30237 Red Brick, Modified 1 x 2 with Vertical Clip (Alternate) (match ID 1)
* Add 2 Part 3794b Red Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 1)
* Add 1 Part 3794b Black Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) (Alternate) (match ID 1)
Comments from Submitter:
Authorized by Stefaan.
|
|
| Author: | miltonpita | | Posted: | Apr 17, 2014 14:07 | | Subject: | Inventory Change Request for Set 60003-1 | | Viewed: | 24 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 4085b Light Bluish Gray Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip) (Alternate) (match ID 2)
Comments from Submitter:
Authorized by Stefaan.
|
|
| Author: | elias3 | | Posted: | Apr 17, 2014 14:07 | | Subject: | Inventory Change Request for Set 60056-1 | | Viewed: | 29 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 6112pb012L Blue Brick 1 x 12 with White '24-7 SERVICE' and Phone Pattern on Left (Sticker) - Set 60056 (Counterpart)
* Add 1 Part 6112pb012R Blue Brick 1 x 12 with White '24-7 SERVICE' and Phone Pattern on Right (Sticker) - Set 60056 (Counterpart)
* Add 1 Part 57779pb010 Black Crane Arm Outside, New Wide with Pin Hole at Mid-Point with Red and White Danger Stripes Pattern on Both Sides (Sticker) - Set 60056 (Counterpart)
* Add 1 Part 30413pb041 White Panel 1 x 4 x 1 with Red and White Danger Stripes and 'PN60056' Pattern (Sticker) - Set 60056 (Counterpart)
|
|
| Author: | enig | | Posted: | Apr 17, 2014 08:08 | | Subject: | Re: Allow buyers to cancel order under IRR* | | Viewed: | 39 times | | Topic: | Suggestions | |
| In Suggestions, fosterbengoshi writes:
| | In Suggestions, MassBricks writes:
| | ... you are saying that ...
|
No, that is NOT what I am saying.
|
that is PRECISELY what you are saying
In Suggestions, fosterbengoshi writes:
| | Third, I do not believe buyers should be able to cancel an entire order if something
is missing
|
|
| Author: | ToriHada | | Posted: | Apr 17, 2014 07:52 | | Subject: | Re: Allow buyers to cancel order under IRR* | | Viewed: | 57 times | | Topic: | Suggestions | |
| In Suggestions, MassBricks writes:
| | ... you are saying that ...
|
No, that is NOT what I am saying.
| | Just in general, I think the penalty for an order cancellation is excessive.
If a buyer lets the seller know soon after the invoice is sent, I don't see
it as a big problem (unless they are abusive with it, such as holding up a large
portion of inventory).
|
I agree. But this is a different issue.
Thor
|
|
| Author: | enig | | Posted: | Apr 17, 2014 07:33 | | Subject: | Re: Allow buyers to cancel order under IRR* | | Viewed: | 66 times | | Topic: | Suggestions | |
| In Suggestions, fosterbengoshi writes:
| | I voted no. For several reasons.
First, if BRricksters is your motivation for this suggestion, you simply cannot
compare 99.9% of BrickLink's sellers to that one bad seller. The problem
is, fortunately, not as rampant as you believe. This suggestion is overkill,
unnecessary and ineffective.
|
No, bricksters is not a motivation for any of my suggestions for the site, except
maybe to stop screwing around.
If I believed that bricsters is the only store I would have not bothered with
this. I used that store merely for an example, as it was the easiest way to get
the point through.
| | Second, implementing this suggestion will not solve any problems. For one thing,
it is so easy to get around. If sellers risk losing an entire order they spent
time picking and packing merely because of one or two missing penny parts, they
just won't file an Item Removal Request.
|
I think eileenkeeney put it quite nicely:
| | In Suggestions, eileenkeeney writes:
| | First, there should be a requirement that sellers notify buyers if not shipping
everything ordered, and a requirement to use the Item Removal request.
Maybe there should be a "Seller did not follow Bricklink policy" submission,
that a seller is only allowed so many of, before a temporary loss of selling
privileges.
Then along with that add the option to Cancel order, as a response to a seller
initiated Item Removal Request.
|
|
To me, it is *extremely* frustrating when sellers write PM's with what is
missing from my orders. Most of the time I do not care about what is missing.
What I care about is to have *accurate* order details, so I can rely to that
info when I am a) editing my wanted lists and b) checking orders, as I do it
outside BL. When I have to manually address that, it means wasting *a lot* of
time, and the possibility to introduce mistakes in my lists. One or two orders
- no biggie. Dozens of orders with dozens of "corrections" that I have to make
myself - HOURS of wasted time.
I completely agree, sellers must be obliged to submit IRRs.
| | Third, I do not believe buyers should be able to cancel an entire order if something
is missing. Because, in my case at least, it is not necessary to cancel the order.
If the buyer really needs that missing item, I will order it from another seller
and have it shipped directly to the buyer at my expense. Thus, the buyer loses
nothing.
My policy with missing items is to let the buyer know as soon as I know something
is missing and then offer the buyer three choices to resolve the matter: (1)
A refund or credit for double the value of the missing item(s); (2) a coupon
for triple the amount of the missing item(s); or, if neither of those options
are acceptable to the buyer, (3) I will order the missing item(s) from another
seller and have them shipped directly to my buyer at my expense. This third option
makes the buyer whole. It makes it unnecessary for the buyer to order the item
elsewhere and pay more shipping costs. And the item can be received around the
same time his order with me is received.
If I am willing to make my buyer whole and provide him everything he ordered,
there is no reason he should be allowed to cancel his entire order with me. Particularly
if we are taking about a large order with numerous lots that I have spent time
on.
I suspect many other good sellers feel and do the same as I do. They should not
be penalized if they are able to make the buyer whole.
|
Foster.. First - how you deal with this is completely irrelevant in this
discussion. But if we follow your logic then we also do not need NRS and NSS
because you will never do any wrong to any buyer, therefore NRS or NSS
options is an overkill, unnecessary and ineffective.
Suggestion is about sellers who are not as brand spanking awesome as you are,
but about those who are not. Because right now there is nothing to stop them
from abusing their buyers, and other sellers too (this is a bit of a long shot
regarding other sellers, but put your mind to it and you should figure it out)
Third. I am first and foremost a seller, so why would I be digging my
own grave? Contrary to what you might think, I never take sides in any argument
when it comes to suggestions. I am looking at the system as a whole, and this
would apply to me just as much as to other sellers. The way it is now, sellers
have full power to do with their customers' orders whatever they want, and
the buyer is next to powerless.
| | BTW, I am aware that many European sellers are subject to the Distance Selling
Regulations which require them to accept order cancellations and returns. Fortunately,
the DSR does not apply to US sellers and there is no similar law in the USA.
Thor
|
This suggestion has nothing to do with Distance Selling Regulations. I am not
talking about buyers right to cancel any order (my personal opinion is that buyers
should not have that right). I am talking about buyer's right to cancel an
order, when seller is not willing/unable to supply the full order.
I will repeat this one again just for you. I am talking about buyer's
right to cancel an order, when seller is not willing/unable to supply the
full order.
P.S. as was noted to me in a PM... no I do not have any illusions for this, or
for just about any suggestion to be implemented in BL1 All this is for the
dev team to take a look and analyze now. So if I suggest this once BL2 turns
out, I wont get an answer "ou, ay, why havent you said anything earlier? We
need to re-code half of BL2 to implement this" 
|
|
| Author: | goshe7 | | Posted: | Apr 17, 2014 07:10 | | Subject: | Re: Suggestion: REMOVE SUGGESTIONS | | Viewed: | 57 times | | Topic: | Suggestions | |
| In Suggestions, theboyslegos writes:
| | This is a sincere suggestion and not sarcasm.
Please remove the suggestion topic from the forums. There's 850 open suggestions
with over 77,000 posts and 0 have been implemented.
|
There is a reason for that. You can debate if the reasons for 0 implementations
is valid, but the reasoning has been explained.
| | Most recently the suggestion
to remove MSRP's was discarded even though the vast majority of sellers do
not want it.
|
Majority vote never has been, and never should be, the only factor in implementing
suggestions.
| |
I've seen numerous suggestions to alter the way feedback is displayed to
better represent the members performance in the community and thus far nothing
has come of it.
I understand the desire for any company to want input from their customers, but
in this setting when input is given, but action is not taken it quickly becomes
demoralizing for the members. Eventually people realize their opinion is of
no value to ownership and they stop participating.
|
Agreed.
| | I think when a company puts
more emphasis on "market research" than they do the words coming from customers
mouths it's a recipe for degradation of the community here on bricklink.
|
BrickLink has something like 300,000 registered users. Probably 300 are active
on the forums. And probably 30 are particularly "vocal". Letting that tiny
fraction of the population that is "vocal" on the forums be your sole voice for
maintaining the community is equally dangerous.
| |
Like I said, this is a serious suggestion. I think giving people the illusion
of some decision making ability when in fact they have none will do nothing more
than hurt the site.
Matt
|
Suggestions do not equal decision making ability. Perhaps you misspoke. I wouldn't
disagree if you said the suggestions topic might give people the impression that
their opinions matter when in fact it doesn't.
|
|
| Author: | bb138026 | | Posted: | Apr 17, 2014 07:01 | | Subject: | Re: Suggestion: REMOVE SUGGESTIONS | | Viewed: | 42 times | | Topic: | Suggestions | |
| In Suggestions, theboyslegos writes:
| | Please remove the suggestion topic from the forums. There's 850 open suggestions
with over 77,000 posts and 0 have been implemented. Most recently the suggestion
to remove MSRP's was discarded even though the vast majority of sellers do
not want it.
|
It's about time people realize we have no say whatsoever in how BrickLink
is run. This isn't a community-driven website anymore. Management will work
on whatever they want, such as this MOC shop, which no one had asked for.
Perhaps we'll now see fewer endless and ultimately pointless debates in the
forum?
|
|
| Author: | jkim0222 | | Posted: | Apr 17, 2014 05:23 | | Subject: | Inventory Change Request for Set 42020-1 | | Viewed: | 36 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3707 Black Technic, Axle 8 (Extra)
* Add 1 Part 4265c Light Bluish Gray Technic Bush 1/2 Smooth (Extra)
* Add 1 Part 3673 Light Bluish Gray Technic, Pin without Friction Ridges Lengthwise (Extra)
* Add 1 Part 3713 Light Bluish Gray Technic Bush (Extra)
* Add 1 Part 6589 Tan Technic, Gear 12 Tooth Bevel (Extra)
* Add 1 Part 32002 Tan Technic, Pin 3/4 (Extra)
* Add 1 Part 50945 Black Tire 14mm D. x 6mm Solid Smooth (Extra)
* Add 1 Part 2780 Black Technic, Pin with Friction Ridges Lengthwise WITH Center Slots (Extra)
* Add 1 Part 32062 Red Technic, Axle 2 Notched (Extra)
Comments from Submitter:
Extra items after building 42020-1.
One Black Technic, Liftarm 2 x 4 L-Shape Thick (32140) was left after building the original model, but it was for the alternative model.
One Black Technic, Axle 8 (3705) and one Black Tire 14mm D. x 6mm Solid Smooth (50945) were rare extra parts.
The other 7 parts were small pins and bushes commonly found in Technic sets.
|
|
| Author: | Brick_Wizard | | Posted: | Apr 17, 2014 04:14 | | Subject: | Re: Suggestion: REMOVE SUGGESTIONS | | Viewed: | 43 times | | Topic: | Suggestions | |
| Wouldn't it be ironic if this was the first suggestion they decided to implement
in years? 
|
| Author: | Brickwilbo | | Posted: | Apr 17, 2014 03:08 | | Subject: | Re: Suggestion: REMOVE SUGGESTIONS | | Viewed: | 62 times | | Topic: | Suggestions | |
| In Suggestions, theboyslegos writes:
| | This is a sincere suggestion and not sarcasm.
Please remove the suggestion topic from the forums. There's 850 open suggestions
with over 77,000 posts and 0 have been implemented.
Matt
|
Voted no.
There are Suggestions double, already existing or help/wantlist/inventory-questions
posted as suggestions which could be removed/discarded.
I patiently wait for the upcoming suggestion-survey: http://www.bricklink.com/message.asp?ID=809302
|
|
| Author: | WoutR | | Posted: | Apr 17, 2014 02:46 | | Subject: | Re: Suggestion: REMOVE SUGGESTIONS | | Viewed: | 56 times | | Topic: | Suggestions | |
| In Suggestions, theboyslegos writes:
| | This is a sincere suggestion and not sarcasm.
Please remove the suggestion topic from the forums. There's 850 open suggestions
with over 77,000 posts and 0 have been implemented.
|
No. I like the suggestions. It is a good way for us to provide input and have
others respond to it.
Currently there is a huge backlog but I hope that much can be dealt with while
this website works towards version 3.0.
How BrickLink deals with this information is up to them. We are not a democracy,
but that does not mean we are not listened to. Even if only one out of ten suggestions
is accepted, that one might provide a very useful solution to a problem the website
management did not even realise was there before the suggestion was made.
|
|
| Author: | theboystoys | | Posted: | Apr 17, 2014 01:47 | | Subject: | Re: Suggestion: REMOVE SUGGESTIONS | | Viewed: | 54 times | | Topic: | Suggestions | |
| In Suggestions, FigBits writes:
| | In Suggestions, theboyslegos writes:
| | This is a sincere suggestion and not sarcasm.
Please remove the suggestion topic from the forums. There's 850 open suggestions
with over 77,000 posts and 0 have been implemented. Most recently the suggestion
to remove MSRP's was discarded even though the vast majority of sellers do
not want it.
I've seen numerous suggestions to alter the way feedback is displayed to
better represent the members performance in the community and thus far nothing
has come of it.
I understand the desire for any company to want input from their customers, but
in this setting when input is given, but action is not taken it quickly becomes
demoralizing for the members. Eventually people realize their opinion is of
no value to ownership and they stop participating. I think when a company puts
more emphasis on "market research" than they do the words coming from customers
mouths it's a recipe for degradation of the community here on bricklink.
Like I said, this is a serious suggestion. I think giving people the illusion
of some decision making ability when in fact they have none will do nothing more
than hurt the site.
Matt
|
I disagree.
Could there be more action on suggestions? Absolutely. Is it frustrating to see
many great suggestions that have not been implemented over the last few years?
Definitely.
But if BL tomorrow decided to delete the Suggestions topic, and posted "Hey,
all! We decided that it's better to just not let you think you have any influence
over the direction the company takes anymore." Well... that would be much much
worse.
--
Marc.
|
I know what your saying but the reality is we don't have any influence over
the direction of the company and giving people false hope is only positive until
the person realizes their opinion is irrelevant.
By the way I don't fault BL for running their business the way they see fit.
Ultimately if they make poor decisions it will decline. If they make positive
changes it will improve. But the users have no say in it, they can only decide
to either use the site or not.
Matt
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
