Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies Author: | Biodreamer | Posted: | Dec 9, 2016 16:17 | Subject: | Re: Bricklink app (!/?) | Viewed: | 52 times | Topic: | Suggestions | |
| In Suggestions, C0lsanders_ writes:
| I've been thinking, I really think Bricklink should come up with an app (for
android and apple, obviously).
Personally, I find it very difficult to use any website on a browser on my tablet,
and a smaller screened smartphone would be no better. As such, I rarely ever
use bricklink on my tablet, just because it is so difficult. I know there is
the "mobile site", but I'm figuring that's just the same desktop site,
enhanced for mobile devices (am I wrong? Please correct if I am). I Don't
find it's better at all. It still has the upper "tabs" (Shop, community,
my BL, etc, etc) which on desktop requires a hover to use, most of the time.
On my tablet, I'm constantly using the "normal" version and using "use desktop
version", which really isn't any different or any better.
Anyway, consider other major sites (facebook, ebay, amazon, amazon seller, paypal,
gmail, how many others am I not including?) that one can visit on a browser OR
an app. All those aren't just 5% different versions of the same desktop site,
they are designed ground up for tablets/phones. I think bricklink could do very
well to come up with one. I KNOW I'd use it all the time. Heck, I've
even be willing to pay the typical .99 for it.
Has there been talk of an app in the past that I've missed, or is my idea
totally, 100% new?
Miles (C0lsanders_)
|
Bricklink webpage should support mobile phones, what I don't understand is
why they didn't make stud.io an app, so you could browse MOC instruction
in your mobile or tablet.
|
|
Author: | jennnifer | Posted: | Dec 9, 2016 13:33 | Subject: | Re: Inventory Change Request for Minifig mmf005 | Viewed: | 20 times | Topic: | Inventories Requests | |
| In Inventories Requests, Humpfry007 writes:
|
have this set in hand but only with instructions. I took some pictures and 1
from the minifig.
Greetings,
Sven Sanen
|
Thanks for posting the minifig image! I have added it to the catalog.
Jen
|
|
Author: | Humpfry007 | Posted: | Dec 9, 2016 12:41 | Subject: | Re: Inventory Change Request for Minifig mmf005 | Viewed: | 23 times | Topic: | Inventories Requests | |
| In Inventories Requests, taxan writes:
| In Inventories Requests, Humpfry007 writes:
| Please make changes to the following inventory:
* Delete 1 Part 3901 Brown Minifig, Hair Male
Comments from Submitter:
The hair of the minifig is female (No.4530) on the picture of the instructions of set 1878-1
|
That Male Minifig still are in set and .
The image of the instructions for set do show a female Minifig
But the correct Female Minifig aren't in the Catalog yet.
It need to be added (with picture) to the Catalog before a change request for
that set can be made.
Have a nice day.
taxan
|
have this set in hand but only with instructions. I took some pictures and 1
from the minifig.
Greetings,
Sven Sanen
|
|
|
Author: | Brickwilbo | Posted: | Dec 9, 2016 10:31 | Subject: | Re: Bricklink app (!/?) | Viewed: | 48 times | Topic: | Suggestions | |
| The focus should be first to get a properly working website running.
In Suggestions, C0lsanders_ writes:
| I've been thinking, I really think Bricklink should come up with an app (for
android and apple, obviously).
Personally, I find it very difficult to use any website on a browser on my tablet,
and a smaller screened smartphone would be no better. As such, I rarely ever
use bricklink on my tablet, just because it is so difficult. I know there is
the "mobile site", but I'm figuring that's just the same desktop site,
enhanced for mobile devices (am I wrong? Please correct if I am). I Don't
find it's better at all. It still has the upper "tabs" (Shop, community,
my BL, etc, etc) which on desktop requires a hover to use, most of the time.
On my tablet, I'm constantly using the "normal" version and using "use desktop
version", which really isn't any different or any better.
Anyway, consider other major sites (facebook, ebay, amazon, amazon seller, paypal,
gmail, how many others am I not including?) that one can visit on a browser OR
an app. All those aren't just 5% different versions of the same desktop site,
they are designed ground up for tablets/phones. I think bricklink could do very
well to come up with one. I KNOW I'd use it all the time. Heck, I've
even be willing to pay the typical .99 for it.
Has there been talk of an app in the past that I've missed, or is my idea
totally, 100% new?
Miles (C0lsanders_)
|
|
|
Author: | jennnifer | Posted: | Dec 9, 2016 10:30 | Subject: | Inventory Change Request for Set 6949-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 3 Part 4215a Black Panel 1 x 4 x 3 - Solid Studs (Alternate) (match ID 1)
* Change 3 Part Black 4215b Panel 1 x 4 x 3 - Hollow Studs {match ID 0 to 1}
Comments from Submitter:
Submitting correction for inventory change request. http://www.bricklink.com/messageThread.asp?ID=213819
|
|
Author: | C0lsanders_ | Posted: | Dec 9, 2016 09:47 | Subject: | Bricklink app (!/?) | Viewed: | 181 times | Topic: | Suggestions | Status: | Discarded | |
| I've been thinking, I really think Bricklink should come up with an app (for
android and apple, obviously).
Personally, I find it very difficult to use any website on a browser on my tablet,
and a smaller screened smartphone would be no better. As such, I rarely ever
use bricklink on my tablet, just because it is so difficult. I know there is
the "mobile site", but I'm figuring that's just the same desktop site,
enhanced for mobile devices (am I wrong? Please correct if I am). I Don't
find it's better at all. It still has the upper "tabs" (Shop, community,
my BL, etc, etc) which on desktop requires a hover to use, most of the time.
On my tablet, I'm constantly using the "normal" version and using "use desktop
version", which really isn't any different or any better.
Anyway, consider other major sites (facebook, ebay, amazon, amazon seller, paypal,
gmail, how many others am I not including?) that one can visit on a browser OR
an app. All those aren't just 5% different versions of the same desktop site,
they are designed ground up for tablets/phones. I think bricklink could do very
well to come up with one. I KNOW I'd use it all the time. Heck, I've
even be willing to pay the typical .99 for it.
Has there been talk of an app in the past that I've missed, or is my idea
totally, 100% new?
Miles (C0lsanders_)
|
|
Author: | Brickwilbo | Posted: | Dec 9, 2016 07:34 | Subject: | Re: Notificatio message new part in the inventory | Viewed: | 41 times | Topic: | Suggestions | |
| In Suggestions, GianniTrippi writes:
| Hi.
Is possible to improve the DataBase to send a new notification message when the
parts move from Stockroom into Inventory?
For ex: I finished brick 2 x 2 yellow... but in few days I put it in again my
inventory, I would like to comunicate it to all the users that have the brick
in their wanted list.
Is It possible?
Thanks.
Gianni.
|
Notifications are send for available l new listed parts or when parts become
available when moved from Stockroom to store.
It doesn't notify when you list new items in a Stockroom.
|
|
Author: | GianniTrippi | Posted: | Dec 9, 2016 06:46 | Subject: | Notificatio message new part in the inventory | Viewed: | 70 times | Topic: | Suggestions | Status: | Discarded | |
| Hi.
Is possible to improve the DataBase to send a new notification message when the
parts move from Stockroom into Inventory?
For ex: I finished brick 2 x 2 yellow... but in few days I put it in again my
inventory, I would like to comunicate it to all the users that have the brick
in their wanted list.
Is It possible?
Thanks.
Gianni.
|
|
Author: | axaday | Posted: | Dec 8, 2016 23:02 | Subject: | Inventory Change Request for Set 70909-1 | Viewed: | 25 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3068bpb1036 Medium Blue Tile 2 x 2 with Batcomputer Batsuit Cowl Display Pattern (Sticker) - Set 70909 (Counterpart)
* Add 1 Part 3068bpb1034 Medium Blue Tile 2 x 2 with Batcomputer Minifig Target Display Pattern (Sticker) - Set 70909 (Counterpart)
* Add 1 Part 3068bpb1035 Medium Blue Tile 2 x 2 with Batcomputer Pretzel Display Pattern (Sticker) - Set 70909 (Counterpart)
* Add 1 Part 3068bpb1033 Medium Blue Tile 2 x 2 with Batcomputer Yellow Light Display Pattern (Sticker) - Set 70909 (Counterpart)
|
|
Author: | bb53904 | Posted: | Dec 8, 2016 14:32 | Subject: | Inventory Change Request for Set 10726-1 | Viewed: | 39 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 33183 Bright Green Carrot Top (Extra)
Comments from Submitter:
Confirmed Rebrickable member's original submission with my own sealed set.
|
|
Author: | axaday | Posted: | Dec 8, 2016 11:29 | Subject: | Inventory Change Request for Set 70909-1 | Viewed: | 22 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 87079pb365 Medium Blue Tile 2 x 4 with Batcomputer Bat Playlist Status Pattern (Sticker) - Set 70909 (Counterpart)
* Add 1 Part 87079pb362 Medium Blue Tile 2 x 4 with Batcomputer Grappling Gun and Wayne Fortune Status Pattern (Sticker) - Set 70909 (Counterpart)
* Add 1 Part 87079pb361 Medium Blue Tile 2 x 4 with Batcomputer Map and GPS Pattern (Sticker) - Set 70909 (Counterpart)
* Add 1 Part 87079pb363 Medium Blue Tile 2 x 4 with Batcomputer Penguin and Duck Tank Status Pattern (Sticker) - Set 70909 (Counterpart)
* Add 1 Part 87079pb364 Medium Blue Tile 2 x 4 with Batcomputer Riptide Status Pattern (Sticker) - Set 70909 (Counterpart)
|
|
Author: | axaday | Posted: | Dec 7, 2016 22:56 | Subject: | Inventory Change Request for Set 70909-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3069bpb537 Black Tile 1 x 2 with 'EMERGENCY SHUTDOWN' over Red and White Danger Stripes Pattern (Sticker) - Set 70909 (Counterpart)
* Add 1 Part 3069bpb536 Black Tile 1 x 2 with Batcomputer Control Console Yellow Square, Blue and White Round Buttons / Lights Pattern (Sticker) - Set 70909 (Counterpart)
* Add 1 Part 3069bpb535 Black Tile 1 x 2 with Batcomputer Control Console Yellow, Blue and White Square Buttons / Lights Pattern (Sticker) - Set 70909 (Counterpart)
|
|
Author: | bricksahead | Posted: | Dec 7, 2016 19:26 | Subject: | Add link for "Reserved Lots" under tab "Shop" | Viewed: | 46 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Hi,
Over the years, I recall quite a few buyers for whom I had reserved lots asking
me how to see and order these lots.
When you go to a store, three tabs are displayed: "Shop", "Terms" and "Feedback".
Under the "Shop" tab are the following links/sub menus:
Featured All Items Newest Items Wanted List
I think it would be very helpful for a buyer if a new link/sub menu called "Reserved
Lots' was added to the above. The link should perhaps only be visible
if there are reserved lots. It should also be possible for a buyer to add all
reserved lots in one click.
The documentation describes a link "Show All Items Reserved for Me" in the left
store menu. I don't recall ever seeing such a link, but I think a link right
next to "Wanted List' would be more visible and easier to explain to a user.
http://www.bricklink.com/help.asp?helpID=253&q=Reserved+Lots
Hanne
|
|
Author: | normann1974 | Posted: | Dec 7, 2016 11:43 | Subject: | Re: Inventory Change Request for Set 10245-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
| In Inventories Requests, AlltRightBricks writes:
| Please make changes to the following inventory:
* Add 1 Part 75c18 Black Hose, Rigid 3mm D. 18L / 14.4cm (Extra)
Comments from Submitter:
Parted 4 copies of this set, and all 4 sets had 3 hoses instead of 2. The instructions only list 2, and as far as I can tell the build only uses 2.
Katie
|
There was no extra in my set - only the two needed to build the set.
|
|
Author: | ZwarteMagica | Posted: | Dec 7, 2016 04:33 | Subject: | Inventory Change Request for Set 7704-1 | Viewed: | 21 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {1 to 2} Part Dark Bluish Gray 3068bpb0562 Tile 2 x 2 with Silver 'SP' Pattern (Sticker) - Set 7704 (Counterpart)
Comments from Submitter:
See stickersheet and page 32 of the instructions
|
Author: | jennnifer | Posted: | Dec 6, 2016 17:53 | Subject: | Inventory Change Request for Set 5892-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Black {51011u Tire 17.5mm D. x 6mm with Shallow Staggered Treads (undetermined type) to 42611 Tire 17.5mm D. x 6mm with Shallow Staggered Treads}
Comments from Submitter:
Source: set in my personal collection.
|
|
Author: | taxan | Posted: | Dec 6, 2016 12:54 | Subject: | Re: Inventory Change Request for Minifig mmf005 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, Humpfry007 writes:
| Please make changes to the following inventory:
* Delete 1 Part 3901 Brown Minifig, Hair Male
Comments from Submitter:
The hair of the minifig is female (No.4530) on the picture of the instructions of set 1878-1
|
That Male Minifig still are in set and .
The image of the instructions for set do show a female Minifig
But the correct Female Minifig aren't in the Catalog yet.
It need to be added (with picture) to the Catalog before a change request for
that set can be made.
Have a nice day.
taxan
|
|
Author: | Humpfry007 | Posted: | Dec 6, 2016 09:51 | Subject: | Inventory Change Request for Minifig mmf005 | Viewed: | 42 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 3901 Brown Minifig, Hair Male
Comments from Submitter:
The hair of the minifig is female (No.4530) on the picture of the instructions of set 1878-1
|
|
Author: | mandr | Posted: | Dec 5, 2016 23:49 | Subject: | Re: Inventory Change Request for Set 5599-1 | Viewed: | 12 times | Topic: | Inventories Requests | |
| In Inventories Requests, mandr writes:
| Please make changes to the following inventory:
* Change {3 to 4} Part Red 3039 Slope 45 2 x 2
Comments from Submitter:
Currently, there are 3 red 2x2 slopes. But on page 55 to 56 of the instructions, there are 3 in Step 1, and it looks like 1 more is added in Step 2. This is a similar change to the corresponding set 5600.
|
Here is a snapshot of the relevant pages in the booklet for set 5599:
|
|
|
Author: | mandr | Posted: | Dec 5, 2016 23:45 | Subject: | Inventory Change Request for Set 5599-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {3 to 4} Part Red 3039 Slope 45 2 x 2
Comments from Submitter:
Currently, there are 3 red 2x2 slopes. But on page 55 to 56 of the instructions, there are 3 in Step 1, and it looks like 1 more is added in Step 2. This is a similar change to the corresponding set 5600.
|
|
Author: | mandr | Posted: | Dec 5, 2016 23:37 | Subject: | Re: Inventory Change Request for Set 5600-1 | Viewed: | 13 times | Topic: | Inventories Requests | |
| In Inventories Requests, mandr writes:
| Please make changes to the following inventory:
* Change {3 to 4} Part Red 3039 Slope 45 2 x 2
Comments from Submitter:
Currently, there are 3 red 2x2 slopes. But on page 58-59 of the instructions, there are 3 in Step 1, and it looks like 1 more is added in Step 2.
|
|
|
Author: | mandr | Posted: | Dec 5, 2016 23:36 | Subject: | Inventory Change Request for Set 5600-1 | Viewed: | 16 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {3 to 4} Part Red 3039 Slope 45 2 x 2
Comments from Submitter:
Currently, there are 3 red 2x2 slopes. But on page 58-59 of the instructions, there are 3 in Step 1, and it looks like 1 more is added in Step 2.
|
|
Author: | randyf | Posted: | Dec 5, 2016 11:00 | Subject: | Inventory Change Request for Set 76027-1 | Viewed: | 19 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Book 6112152 Super Heroes Comic Book, DC Comics, Gorilla Grodd & Darkseid (Batman & Superman Logo) {match ID 0 to 2}
* Change 1 Book 6112153 Super Heroes Comic Book, DC Comics, Gorilla Grodd & Darkseid (Justice League Logo) {Regular to Alternate} {match ID 0 to 2}
Comments from Submitter:
Only one of the two books comes with the set. Therefore, one has to be an alternate, and one has to be the regular.
|
|
Author: | badbob001 | Posted: | Dec 5, 2016 10:44 | Subject: | Pick multiple countries for auto-finder | Viewed: | 49 times | Topic: | Suggestions | Status: | Open | Vote: | [Yes|No] | |
| Please add an option to pick more than one country in the auto-finder feature.
I like to buy from several countries and it's limiting to be restricted to
just one. The region option is also no good since my preferred stores are not
in the same region. For example, I like to purchase from USA and Germany.
Thanks!
|
Author: | randyf | Posted: | Dec 5, 2016 09:26 | Subject: | Inventory Change Request for Set 8821-1 | Viewed: | 18 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 2 Part {Metallic Silver to Pearl Light Gray} 51342pb04 Dragon Wing 19 x 11, Yellow Trailing Edge
Comments from Submitter:
Part is definitely *NOT* Metallic Silver, since Metallic Silver parts are coated in paint. These wings are a multicolor part which are molded from two colors of plastic.
|
|
Author: | WoutR | Posted: | Dec 4, 2016 18:40 | Subject: | Re: Inventory Change Request for Set 005-1 | Viewed: | 18 times | Topic: | Inventories Requests | |
| In Inventories Requests, legoman77 writes:
| In Inventories Requests, WoutR writes:
| In Inventories Requests, viejos writes:
| In Inventories Requests, huriel writes:
| Please make changes to the following inventory:
* Add 1 Part 3004 Red Brick 1 x 2
* Add 1 Part 3003old Red Brick 2 x 2 without Inside Supports
* Add 10 Part 3001old Red Brick 2 x 4 without Cross Supports
* Add 1 Part 3004 White Brick 1 x 2
* Add 1 Part 3003old White Brick 2 x 2 without Inside Supports
* Add 10 Part 3001old White Brick 2 x 4 without Cross Supports
* Add 2 Part 3004 Yellow Brick 1 x 2
* Add 2 Part 3004 Blue Brick 1 x 2
* Add 2 Part 3004 Black Brick 1 x 2
* Add 4 Part 3004 Trans-Clear Brick 1 x 2
Comments from Submitter:
I just acquired a set, which was incomplete but with the original box. Seeing the models there, it is simply impossible to build them with the current BrickLink's inventory. I reconstructed what should be the minimal set to build all the models in the box. This is also evident from the photos which are uploaded in BrickLink, but I can provide new photos with the alternate models in the box, if needed.
Completing the box with all the pieces that I think should be in the inventory and a catalog of that time, the weight is 204 g, please update that as well.
|
For these very old sets, they often came with stock pictures that were not intended
to serve as instructions for what could be built with the set.
|
I Agree. They were inspirational models that were not directly related to the
set contents.
| Before making
any changes, please check with the submitter of this inventory who is an authority
on such matters.
It is also possible that different contents came at different times and locations
for these old sets, which were little more than parts packs. Often the BL inventory
only serves as a suggestion as to what one might find.
Russell
|
|
I had several of these sets and many matched the bricks that were in each. Here
on Peeron.com it was inventoried by someone and I varied it from the sets I had
in my possession. At the same time, Lego often substituted elements when they
ran short and they did not change building instructions.
http://peeron.com/inv/sets/005-2
John P
John P
|
I think that the first instructions were added to some sets in 1964. Not all
the sets immediately included them. I think this set was made during the transition
period. I agree with Russell that caution is needed for sets from this time period,
and depending on box images to reconstruct the set contents could lead to errors.
PS. Note that you linked to a different set:
|
|
Author: | legoman77 | Posted: | Dec 4, 2016 17:30 | Subject: | Re: Inventory Change Request for Set 005-1 | Viewed: | 32 times | Topic: | Inventories Requests | |
| In Inventories Requests, WoutR writes:
| In Inventories Requests, viejos writes:
| In Inventories Requests, huriel writes:
| Please make changes to the following inventory:
* Add 1 Part 3004 Red Brick 1 x 2
* Add 1 Part 3003old Red Brick 2 x 2 without Inside Supports
* Add 10 Part 3001old Red Brick 2 x 4 without Cross Supports
* Add 1 Part 3004 White Brick 1 x 2
* Add 1 Part 3003old White Brick 2 x 2 without Inside Supports
* Add 10 Part 3001old White Brick 2 x 4 without Cross Supports
* Add 2 Part 3004 Yellow Brick 1 x 2
* Add 2 Part 3004 Blue Brick 1 x 2
* Add 2 Part 3004 Black Brick 1 x 2
* Add 4 Part 3004 Trans-Clear Brick 1 x 2
Comments from Submitter:
I just acquired a set, which was incomplete but with the original box. Seeing the models there, it is simply impossible to build them with the current BrickLink's inventory. I reconstructed what should be the minimal set to build all the models in the box. This is also evident from the photos which are uploaded in BrickLink, but I can provide new photos with the alternate models in the box, if needed.
Completing the box with all the pieces that I think should be in the inventory and a catalog of that time, the weight is 204 g, please update that as well.
|
For these very old sets, they often came with stock pictures that were not intended
to serve as instructions for what could be built with the set.
|
I Agree. They were inspirational models that were not directly related to the
set contents.
| Before making
any changes, please check with the submitter of this inventory who is an authority
on such matters.
It is also possible that different contents came at different times and locations
for these old sets, which were little more than parts packs. Often the BL inventory
only serves as a suggestion as to what one might find.
Russell
|
|
I had several of these sets and many matched the bricks that were in each. Here
on Peeron.com it was inventoried by someone and I varied it from the sets I had
in my possession. At the same time, Lego often substituted elements when they
ran short and they did not change building instructions.
http://peeron.com/inv/sets/005-2
John P
John P
|
|
Author: | WoutR | Posted: | Dec 4, 2016 16:40 | Subject: | Re: Inventory Change Request for Set 005-1 | Viewed: | 33 times | Topic: | Inventories Requests | |
| In Inventories Requests, viejos writes:
| In Inventories Requests, huriel writes:
| Please make changes to the following inventory:
* Add 1 Part 3004 Red Brick 1 x 2
* Add 1 Part 3003old Red Brick 2 x 2 without Inside Supports
* Add 10 Part 3001old Red Brick 2 x 4 without Cross Supports
* Add 1 Part 3004 White Brick 1 x 2
* Add 1 Part 3003old White Brick 2 x 2 without Inside Supports
* Add 10 Part 3001old White Brick 2 x 4 without Cross Supports
* Add 2 Part 3004 Yellow Brick 1 x 2
* Add 2 Part 3004 Blue Brick 1 x 2
* Add 2 Part 3004 Black Brick 1 x 2
* Add 4 Part 3004 Trans-Clear Brick 1 x 2
Comments from Submitter:
I just acquired a set, which was incomplete but with the original box. Seeing the models there, it is simply impossible to build them with the current BrickLink's inventory. I reconstructed what should be the minimal set to build all the models in the box. This is also evident from the photos which are uploaded in BrickLink, but I can provide new photos with the alternate models in the box, if needed.
Completing the box with all the pieces that I think should be in the inventory and a catalog of that time, the weight is 204 g, please update that as well.
|
For these very old sets, they often came with stock pictures that were not intended
to serve as instructions for what could be built with the set.
|
I Agree. They were inspirational models that were not directly related to the
set contents.
| Before making
any changes, please check with the submitter of this inventory who is an authority
on such matters.
It is also possible that different contents came at different times and locations
for these old sets, which were little more than parts packs. Often the BL inventory
only serves as a suggestion as to what one might find.
Russell
|
|
|
Author: | huriel | Posted: | Dec 4, 2016 16:26 | Subject: | Re: Inventory Change Request for Set 005-1 | Viewed: | 28 times | Topic: | Inventories Requests | |
| Another photo, of the back of the box |
|
Author: | huriel | Posted: | Dec 4, 2016 16:24 | Subject: | Re: Inventory Change Request for Set 005-1 | Viewed: | 41 times | Topic: | Inventories Requests | |
| As anticipated, here are some photos of the box. |
|
Author: | Singidunum | Posted: | Dec 4, 2016 16:07 | Subject: | Inventory Change Request for Set 7754-1 | Viewed: | 37 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 44126pb042L Dark Green Slope, Curved 6 x 2, with Black Geometric Pattern Model Left Side (Sticker) - Set 7754 (Counterpart)
* Add 1 Part 44126pb042R Dark Green Slope, Curved 6 x 2, with Black Geometric Pattern Model Right Side (Sticker) - Set 7754 (Counterpart)
Comments from Submitter:
Counterpart (stickered) parts for the set 7754 Home One Mon Calamari Star Cruiser
|
|
Author: | therobo | Posted: | Dec 4, 2016 14:56 | Subject: | Re: Inventory Change Request for Set 7942-1 | Viewed: | 26 times | Topic: | Inventories Requests | |
| In Inventories Requests, hawkbit writes:
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {3730 Plate, Modified 2 x 2 with Towball Socket, Short, 4 Slots to 63082 Plate, Modified 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center}
Comments from Submitter:
In accordance with the building instructions on the LEGO website.
|
Both variants are already in the inventory as regular and alternate items.
|
|
Author: | calsbricks | Posted: | Dec 4, 2016 11:25 | Subject: | Please add BL part no to xml verify page | Viewed: | 70 times | Topic: | Suggestions | Status: | Implemented | |
| This is now causing some problems as it does not appear on the page after the
initial paste into the file box. Please add the BL part number to aid reconciliation.
|
Author: | bb435104 | Posted: | Dec 4, 2016 09:09 | Subject: | Inventory Change Request for Set 7942-1 | Viewed: | 29 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part Light Bluish Gray {3730 Plate, Modified 2 x 2 with Towball Socket, Short, 4 Slots to 63082 Plate, Modified 2 x 2 with Towball Socket, Short, Flattened with Holes and Axle Hole in Center}
Comments from Submitter:
In accordance with the building instructions on the LEGO website.
|
|
Author: | Peettoys | Posted: | Dec 4, 2016 08:17 | Subject: | Inventory Change Request for Set 7751-1 | Viewed: | 26 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 4150pb002b White Tile, Round 2 x 2 with SW Republic Pattern on White Background (Sticker) (Counterpart)
Comments from Submitter:
As can been seen on the left side of Ahskoka's Starfighter (instruction booklet page 75).
|
Author: | bb53904 | Posted: | Dec 2, 2016 16:41 | Subject: | Inventory Change Request for Set 10252-1 | Viewed: | 30 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
| Please make changes to the following inventory:
* Change {1 to 2} Part White 3024 Plate 1 x 1 (Extra)
Comments from Submitter:
Model built from sealed box contents. Originally thought it was unusual to find 2 spares of this part in the same bag, so triple checked.
|
Author: | therobo | Posted: | Dec 2, 2016 16:39 | Subject: | Re: Country flag ? | Viewed: | 30 times | Topic: | Suggestions | |
| In Suggestions, Brickwilbo writes:
| In Suggestions, peplu06 writes:
| Hi,
It would be nice and useful to see a small flag matching the
country between "date" and "buyer" in the "feedback" tab.
Is this something possible?
Thanks
Eric
|
Already possible to show country flags: http://www.bricklink.com/feedbackSettings.asp?viewFrom=P
|
Look at the FB tab in stores...
|
Author: | Brickwilbo | Posted: | Dec 2, 2016 16:32 | Subject: | Re: Country flag ? | Viewed: | 27 times | Topic: | Suggestions | |
| In Suggestions, peplu06 writes:
| Hi,
It would be nice and useful to see a small flag matching the
country between "date" and "buyer" in the "feedback" tab.
Is this something possible?
Thanks
Eric
|
Already possible to show country flags: http://www.bricklink.com/feedbackSettings.asp?viewFrom=P
|
Author: | Grego | Posted: | Dec 2, 2016 15:42 | Subject: | Re: Country flag ? | Viewed: | 29 times | Topic: | Suggestions | |
| In Suggestions, peplu06 writes:
| Hi,
It would be nice and useful to see a small flag matching the
country between "date" and "buyer" in the "feedback" tab.
Is this something possible?
Thanks
Eric
|
It probably won't happen.
It would clutter up the triplily redundant FB score, FB coloured brick and FB
brick order number in the block.
Newbies would get confused and want a different country's flag to be displayed
depending on BL's randomized optimization algorithm.
|
Author: | BTJ2023 | Posted: | Dec 2, 2016 14:56 | Subject: | Country flag ? | Viewed: | 137 times | Topic: | Suggestions | Status: | Discarded | |
| Hi,
It would be nice and useful to see a small flag matching the
country between "date" and "buyer" in the "feedback" tab.
Is this something possible?
Thanks
Eric
|
|
Author: | chetzler | Posted: | Dec 1, 2016 19:07 | Subject: | Re: Limit cash payments to approved postal codes | Viewed: | 37 times | Topic: | Suggestions | |
| In Suggestions, RobErNat writes:
| In Suggestions, chetzler writes:
| I just had a buyer from three states away claim that he sent cash in the mail.
|
He 'claims'...
So I suspect you didn't get it (yet) and that he's getting worried...
|
Perhaps "claims" was poor choice of words, I don't suspect anything underhanded
here. The order is less than 20 USD and he's not worried, he only sent it
two days ago (It'll probably be in the mailbox when I get home )
|
| While this seems very risky to me,
|
That would depend on 'how' it was send, sending cash requires a certain
amount of 'intelligent' wrapping so that it ain't 'obvious'
it's cash...
Bills alot of dark paper will do the trick
Coins glued with tape and between cardboard.
The latter remains a problem if it goes trough 'scanners' (for airplanes
and such)
| he did indeed select "Cash (no COD)" as a
payment type even though that option states that it is for local pickup only.
|
I even got a couple of 'international' ones, without any hastle, but
those where 'bills' only (and invisably wrapped by the buyer).
| Since there is no way to actually enforce local pickup, I didn't realize
this until after he mailed the money, frankly because I've never had anyone
do this before!
|
Don't consider it 'unique'
| I accept lots of cash payments from members of my LUG, but it
doesn't usually occur outside of that.
|
Once had someone send me a 'ton' of coins between cardboard, I suspected
him to be a minor emptying his 'piggy bank' , it arrived, I shipped,
no hastle
|
Wow, depending on how many coins, one might have to pay a large shipping fee
just to get the payment to the seller! Still beats the barter system: imagine
mailing a chicken.
|
|
Can we get BrickLink to only accept "Cash" payments on an order if that buyer's
postal code is on a seller-selected list? I don't know how postal codes
work in other countries, but in the US (and Canada to, I think) the zip code
gets more specific as you go from left to right. So for example, using wildcard
characters, I could allow cash payments from anyone in Lincoln, NE with a single
entry: 685**.
|
Sounds complicated, as BL would need to split the 'national buyers' into
thousands of states and provinces all around the world, with the option the be
able to select 'multiple' regions in 'multiple' countries (I've
had international buyers picking up orders because they only live about 100 miles
away - I'm in a small country-)
|
I don't see it as being too complicated. I have a list on which I put selected
zip codes. If a buyer selects "Cash" and his zip code is not on the list, he
is asked to choose a different payment method. BrickLink doesn't need to
be concerned with different states/provinces etc. The onus is on me, the seller,
to set up my approved zip codes list. All BL would have to do is give me a way
to use that list to validate payment methods. And of course, the whole validation
system would be optional, no seller would have to use it.
|
Deactivate 'Cash' if you don't want the hastle, people who wanna
pickup will usually send a mail anyway after seeing your address (and usually
that is *after* they already made the purchase), so just leave in a non instant
payment method (Paypal onsite 'only' would be a problem)
|
|
|
Author: | cosmicray | Posted: | Dec 1, 2016 18:54 | Subject: | Re: Limit cash payments to approved postal codes | Viewed: | 37 times | Topic: | Suggestions | |
| In Suggestions, chetzler writes:
| I just had a buyer from three states away claim that he sent cash in the mail.
While this seems very risky to me, he did indeed select "Cash (no COD)" as a
payment type even though that option states that it is for local pickup only.
Since there is no way to actually enforce local pickup, I didn't realize
this until after he mailed the money, frankly because I've never had anyone
do this before! I accept lots of cash payments from members of my LUG, but it
doesn't usually occur outside of that.
Can we get BrickLink to only accept "Cash" payments on an order if that buyer's
postal code is on a seller-selected list? I don't know how postal codes
work in other countries, but in the US (and Canada to, I think) the zip code
gets more specific as you go from left to right. So for example, using wildcard
characters, I could allow cash payments from anyone in Lincoln, NE with a single
entry: 685**.
Thoughts?
-Chris
|
Well, Cash should have been sent registered in any case. I've had a few rare
cash payments over the years, including one from Japan and another that over-paid
by enough that I had to send change in the return package.
Ray
|
|
Author: | RobErNat | Posted: | Dec 1, 2016 14:18 | Subject: | Re: Limit cash payments to approved postal codes | Viewed: | 48 times | Topic: | Suggestions | |
| In Suggestions, chetzler writes:
| I just had a buyer from three states away claim that he sent cash in the mail.
|
He 'claims'...
So I suspect you didn't get it (yet) and that he's getting worried...
| While this seems very risky to me,
|
That would depend on 'how' it was send, sending cash requires a certain
amount of 'intelligent' wrapping so that it ain't 'obvious'
it's cash...
Bills alot of dark paper will do the trick
Coins glued with tape and between cardboard.
The latter remains a problem if it goes trough 'scanners' (for airplanes
and such)
| he did indeed select "Cash (no COD)" as a
payment type even though that option states that it is for local pickup only.
|
I even got a couple of 'international' ones, without any hastle, but
those where 'bills' only (and invisably wrapped by the buyer).
| Since there is no way to actually enforce local pickup, I didn't realize
this until after he mailed the money, frankly because I've never had anyone
do this before!
|
Don't consider it 'unique'
| I accept lots of cash payments from members of my LUG, but it
doesn't usually occur outside of that.
|
Once had someone send me a 'ton' of coins between cardboard, I suspected
him to be a minor emptying his 'piggy bank' , it arrived, I shipped,
no hastle
|
Can we get BrickLink to only accept "Cash" payments on an order if that buyer's
postal code is on a seller-selected list? I don't know how postal codes
work in other countries, but in the US (and Canada to, I think) the zip code
gets more specific as you go from left to right. So for example, using wildcard
characters, I could allow cash payments from anyone in Lincoln, NE with a single
entry: 685**.
|
Sounds complicated, as BL would need to split the 'national buyers' into
thousands of states and provinces all around the world, with the option the be
able to select 'multiple' regions in 'multiple' countries (I've
had international buyers picking up orders because they only live about 100 miles
away - I'm in a small country-)
Deactivate 'Cash' if you don't want the hastle, people who wanna
pickup will usually send a mail anyway after seeing your address (and usually
that is *after* they already made the purchase), so just leave in a non instant
payment method (Paypal onsite 'only' would be a problem)
|
|
Author: | Grego | Posted: | Dec 1, 2016 12:39 | Subject: | Re: Limit cash payments to approved postal codes | Viewed: | 32 times | Topic: | Suggestions | |
| In Suggestions, chetzler writes:
| In Suggestions, qwertyboy writes:
| In Suggestions, chetzler writes:
| I just had a buyer from three states away claim that he sent cash in the mail.
While this seems very risky to me, he did indeed select "Cash (no COD)" as a
payment type even though that option states that it is for local pickup only.
Since there is no way to actually enforce local pickup, I didn't realize
this until after he mailed the money, frankly because I've never had anyone
do this before! I accept lots of cash payments from members of my LUG, but it
doesn't usually occur outside of that.
Can we get BrickLink to only accept "Cash" payments on an order if that buyer's
postal code is on a seller-selected list? I don't know how postal codes
work in other countries, but in the US (and Canada to, I think) the zip code
gets more specific as you go from left to right. So for example, using wildcard
characters, I could allow cash payments from anyone in Lincoln, NE with a single
entry: 685**.
|
I accept cash when customers pick it up, but in my shop settings I only allow
Paypal payments. If people want to pay in cash at pickup, we communicate beforehand.
This way customers can't "force" a cash payment when it is not appropriate.
So I would suggest you simply remove the cash payment option in your shop, and
maybe add a little blurb that you allow cash at pickup.
Niek.
|
I used to do it that way, but if it is a local buyer (especially someone from
my LUG) I like to know how they're going to pay because I usually give a
discount, and that discount is often a bit more generous if they're paying
with cash.
|
I go further, I make no mention of cash or even local pickup as an option, but
when asked, I almost always agree to local pickup ...cash only. Why pay PayPal
their cut when you don't need to? Buyer saves on shipping. I save on PayPal
fees, win-win.
And no mysterious cash thru the mail 😁 orders
|
|
Author: | chetzler | Posted: | Dec 1, 2016 12:29 | Subject: | Re: Limit cash payments to approved postal codes | Viewed: | 33 times | Topic: | Suggestions | |
| In Suggestions, qwertyboy writes:
| In Suggestions, chetzler writes:
| I just had a buyer from three states away claim that he sent cash in the mail.
While this seems very risky to me, he did indeed select "Cash (no COD)" as a
payment type even though that option states that it is for local pickup only.
Since there is no way to actually enforce local pickup, I didn't realize
this until after he mailed the money, frankly because I've never had anyone
do this before! I accept lots of cash payments from members of my LUG, but it
doesn't usually occur outside of that.
Can we get BrickLink to only accept "Cash" payments on an order if that buyer's
postal code is on a seller-selected list? I don't know how postal codes
work in other countries, but in the US (and Canada to, I think) the zip code
gets more specific as you go from left to right. So for example, using wildcard
characters, I could allow cash payments from anyone in Lincoln, NE with a single
entry: 685**.
|
I accept cash when customers pick it up, but in my shop settings I only allow
Paypal payments. If people want to pay in cash at pickup, we communicate beforehand.
This way customers can't "force" a cash payment when it is not appropriate.
So I would suggest you simply remove the cash payment option in your shop, and
maybe add a little blurb that you allow cash at pickup.
Niek.
|
I used to do it that way, but if it is a local buyer (especially someone from
my LUG) I like to know how they're going to pay because I usually give a
discount, and that discount is often a bit more generous if they're paying
with cash.
|
|
Author: | chetzler | Posted: | Dec 1, 2016 12:25 | Subject: | Re: Limit cash payments to approved postal codes | Viewed: | 40 times | Topic: | Suggestions | |
| In Suggestions, Brickwilbo writes:
| In Suggestions, chetzler writes:
| I just had a buyer from three states away claim that he sent cash in the mail.
While this seems very risky to me, he did indeed select "Cash (no COD)" as a
payment type even though that option states that it is for local pickup only.
Since there is no way to actually enforce local pickup, I didn't realize
this until after he mailed the money, frankly because I've never had anyone
do this before! I accept lots of cash payments from members of my LUG, but it
doesn't usually occur outside of that.
Can we get BrickLink to only accept "Cash" payments on an order if that buyer's
postal code is on a seller-selected list? I don't know how postal codes
work in other countries, but in the US (and Canada to, I think) the zip code
gets more specific as you go from left to right. So for example, using wildcard
characters, I could allow cash payments from anyone in Lincoln, NE with a single
entry: 685**.
Thoughts?
|
Why didn't you catch it at invoicing?
|
Like I said, no one had ever done this before so it wasn't even on my radar.
Of all the things I double-check before invoicing, this is one I never thought
I'd have to worry about--why would anyone risk sending cash in the mail?
|
|
Author: | qwertyboy | Posted: | Dec 1, 2016 12:08 | Subject: | Re: Limit cash payments to approved postal codes | Viewed: | 37 times | Topic: | Suggestions | |
| In Suggestions, chetzler writes:
| I just had a buyer from three states away claim that he sent cash in the mail.
While this seems very risky to me, he did indeed select "Cash (no COD)" as a
payment type even though that option states that it is for local pickup only.
Since there is no way to actually enforce local pickup, I didn't realize
this until after he mailed the money, frankly because I've never had anyone
do this before! I accept lots of cash payments from members of my LUG, but it
doesn't usually occur outside of that.
Can we get BrickLink to only accept "Cash" payments on an order if that buyer's
postal code is on a seller-selected list? I don't know how postal codes
work in other countries, but in the US (and Canada to, I think) the zip code
gets more specific as you go from left to right. So for example, using wildcard
characters, I could allow cash payments from anyone in Lincoln, NE with a single
entry: 685**.
|
I accept cash when customers pick it up, but in my shop settings I only allow
Paypal payments. If people want to pay in cash at pickup, we communicate beforehand.
This way customers can't "force" a cash payment when it is not appropriate.
So I would suggest you simply remove the cash payment option in your shop, and
maybe add a little blurb that you allow cash at pickup.
Niek.
|
|
Author: | Brickwilbo | Posted: | Dec 1, 2016 11:30 | Subject: | Re: Limit cash payments to approved postal codes | Viewed: | 33 times | Topic: | Suggestions | |
| In Suggestions, chetzler writes:
| I just had a buyer from three states away claim that he sent cash in the mail.
While this seems very risky to me, he did indeed select "Cash (no COD)" as a
payment type even though that option states that it is for local pickup only.
Since there is no way to actually enforce local pickup, I didn't realize
this until after he mailed the money, frankly because I've never had anyone
do this before! I accept lots of cash payments from members of my LUG, but it
doesn't usually occur outside of that.
Can we get BrickLink to only accept "Cash" payments on an order if that buyer's
postal code is on a seller-selected list? I don't know how postal codes
work in other countries, but in the US (and Canada to, I think) the zip code
gets more specific as you go from left to right. So for example, using wildcard
characters, I could allow cash payments from anyone in Lincoln, NE with a single
entry: 685**.
Thoughts?
|
Why didn't you catch it at invoicing?
|
|
Author: | bricksahead | Posted: | Dec 1, 2016 11:26 | Subject: | Re: Limit cash payments to approved postal codes | Viewed: | 34 times | Topic: | Suggestions | |
| In Suggestions, chetzler writes:
| I just had a buyer from three states away claim that he sent cash in the mail.
While this seems very risky to me, he did indeed select "Cash (no COD)" as a
payment type even though that option states that it is for local pickup only.
Since there is no way to actually enforce local pickup, I didn't realize
this until after he mailed the money, frankly because I've never had anyone
do this before! I accept lots of cash payments from members of my LUG, but it
doesn't usually occur outside of that.
Can we get BrickLink to only accept "Cash" payments on an order if that buyer's
postal code is on a seller-selected list? I don't know how postal codes
work in other countries, but in the US (and Canada to, I think) the zip code
gets more specific as you go from left to right. So for example, using wildcard
characters, I could allow cash payments from anyone in Lincoln, NE with a single
entry: 685**.
Thoughts?
-Chris
|
No matter what type of payment a buyer selects that buyer can still mail you
cash. All you can do is return the cash if you do not want to accept it. There
is no need to ask Bricklink to check on postal codes if you ask me. I once had
a buyer send me cash. I don't even have that kind of payment as an option.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|