* Delete 4 Part 2453 Black Brick 1 x 1 x 5 (Undetermined Type) (match ID 3)
* Delete 3 Part 3794 Yellow Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 6)
* Delete 1 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 5)
* Delete 4 Part 3794 Dark Blue Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 4)
* Change 4 Part Black 2453b Brick 1 x 1 x 5 - Solid Stud {Alternate to Regular}
* Change 4 Part Dark Blue 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 1 Part Red 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 3 Part Yellow 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 2 Part Dark Bluish Gray {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
* Change 1 Part Yellow {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
* Change 8 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove}
Comments from Submitter:
- For 2453, this set is on the tail end of the transition. I got solid stud and no one has presented evidence for open stud, so I am requesting to just throw out the undetermined.
- For the jumpers, it isn't as strong as the 2453, but the without groove listing was pretty new when the inventory was written and no one has asked to have the undetermined changed to no groove. I got grooves. We can add the no groove if someone finds it.
- For 30237, I got the older variant on each, so I will change the undetermined to the older variant. New variant has been found in yellow, but not DBG.
* Delete 4 Part 2453 Black Brick 1 x 1 x 5 (Undetermined Type) (match ID 3)
* Delete 3 Part 3794 Yellow Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 6)
* Delete 1 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 5)
* Delete 4 Part 3794 Dark Blue Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 4)
* Change 4 Part Black 2453b Brick 1 x 1 x 5 - Solid Stud {Alternate to Regular}
* Change 4 Part Dark Blue 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 1 Part Red 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 3 Part Yellow 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 2 Part Dark Bluish Gray {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
* Change 1 Part Yellow {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
* Change 8 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove}
Comments from Submitter:
- For 2453, this set is on the tail end of the transition. I got solid stud and no one has presented evidence for open stud, so I am requesting to just throw out the undetermined.
- For the jumpers, it isn't as strong as the 2453, but the without groove listing was pretty new when the inventory was written and no one has asked to have the undetermined changed to no groove. I got grooves. We can add the no groove if someone finds it.
- For 30237, I got the older variant on each, so I will change the undetermined to the older variant. New variant has been found in yellow, but not DBG.
* Delete 4 Part 2453 Black Brick 1 x 1 x 5 (Undetermined Type) (match ID 3)
* Delete 3 Part 3794 Yellow Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 6)
* Delete 1 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 5)
* Delete 4 Part 3794 Dark Blue Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 4)
* Change 4 Part Black 2453b Brick 1 x 1 x 5 - Solid Stud {Alternate to Regular}
* Change 4 Part Dark Blue 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 1 Part Red 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 3 Part Yellow 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 2 Part Dark Bluish Gray {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
* Change 1 Part Yellow {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
* Change 8 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove}
Comments from Submitter:
- For 2453, this set is on the tail end of the transition. I got solid stud and no one has presented evidence for open stud, so I am requesting to just throw out the undetermined.
- For the jumpers, it isn't as strong as the 2453, but the without groove listing was pretty new when the inventory was written and no one has asked to have the undetermined changed to no groove. I got grooves. We can add the no groove if someone finds it.
- For 30237, I got the older variant on each, so I will change the undetermined to the older variant. New variant has been found in yellow, but not DBG.
Can confirm all of these changes. Finally got around to fixing this one up.
* Delete 4 Part 2453 Black Brick 1 x 1 x 5 (Undetermined Type) (match ID 3)
* Delete 3 Part 3794 Yellow Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 6)
* Delete 1 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 5)
* Delete 4 Part 3794 Dark Blue Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 4)
* Change 4 Part Black 2453b Brick 1 x 1 x 5 - Solid Stud {Alternate to Regular}
* Change 4 Part Dark Blue 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 1 Part Red 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 3 Part Yellow 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 2 Part Dark Bluish Gray {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
* Change 1 Part Yellow {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
* Change 8 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove}
Comments from Submitter:
- For 2453, this set is on the tail end of the transition. I got solid stud and no one has presented evidence for open stud, so I am requesting to just throw out the undetermined.
- For the jumpers, it isn't as strong as the 2453, but the without groove listing was pretty new when the inventory was written and no one has asked to have the undetermined changed to no groove. I got grooves. We can add the no groove if someone finds it.
- For 30237, I got the older variant on each, so I will change the undetermined to the older variant. New variant has been found in yellow, but not DBG.
Which of the other regular/alternate parts came in your set? And can you confirm
all of the hollow stud heads?
* Delete 4 Part 2453 Black Brick 1 x 1 x 5 (Undetermined Type) (match ID 3)
* Delete 3 Part 3794 Yellow Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 6)
* Delete 1 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 5)
* Delete 4 Part 3794 Dark Blue Plate, Modified 1 x 2 with 1 Stud, Jumper (Undetermined Type) (match ID 4)
* Change 4 Part Black 2453b Brick 1 x 1 x 5 - Solid Stud {Alternate to Regular}
* Change 4 Part Dark Blue 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 1 Part Red 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 3 Part Yellow 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {Alternate to Regular}
* Change 2 Part Dark Bluish Gray {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
* Change 1 Part Yellow {30237 Brick, Modified 1 x 2 with Clip (Vertical Grip) (Undetermined Type) to 30237a Brick, Modified 1 x 2 with Split U Clip Thick (Vertical Grip)}
* Change 8 Part Dark Bluish Gray {44301 Hinge Plate 1 x 2 Locking with 1 Finger on End (Undetermined Type) to 44301b Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove}
Comments from Submitter:
- For 2453, this set is on the tail end of the transition. I got solid stud and no one has presented evidence for open stud, so I am requesting to just throw out the undetermined.
- For the jumpers, it isn't as strong as the 2453, but the without groove listing was pretty new when the inventory was written and no one has asked to have the undetermined changed to no groove. I got grooves. We can add the no groove if someone finds it.
- For 30237, I got the older variant on each, so I will change the undetermined to the older variant. New variant has been found in yellow, but not DBG.
Which of the other regular/alternate parts came in your set? And can you confirm
all of the hollow stud heads?
USA, Oklahoma
)
)
)
)
)
)
)
Germany, Niedersachsen
