* Add 1 Part 3736 Light Gray Technic, Steering Pulley Large (Extra)
* Add 6 Part 3626ap01 Yellow Minifigure, Head Standard Grin Pattern - Solid Stud (match ID 4)
* Add 2 Part 3048c Black Slope 45 2 x 1 Triple with Inside Bar
* Add 2 Part 3049b Black Slope 45 2 x 1 Double / Inverted - without Bottom Tube or Bottom Stud Holder
* Change 1 Part Black {3962a Minifigure, Utensil Radio with Compact Handle to 3962b Minifigure, Utensil Radio with Extended Handle}
* Change 3 Part Black {4085a Plate, Modified 1 x 1 with Clip Vertical - Type 1 (thin open O clip) to 4085b Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip)}
* Change 7 Part Trans-Clear {3004 Brick 1 x 2 to 3004f1 Brick 1 x 2 Transparent with 'Frosted' Horizontal Line}
* Change 4 Part Trans-Clear {3010 Brick 1 x 4 to 3010f3 Brick 1 x 4 Transparent with 'Frosted' Horizontal Lines}
* Change 4 Part Yellow {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 2 Part Black {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 6 Part Yellow 3626bp01 Minifigure, Head Standard Grin Pattern - Blocked Open Stud {Regular to Alternate} {match ID 0 to 4}
Comments from Submitter:
Okay, I think I'm done going over everything.
1-2) I didn't get pics of these before I opened the bags. I can take pics but they wouldn't mean anything more than what I say they mean at this point.
3) This one is weird. The box says there is one, but there are two. One each in 2 identical part bags.
4-5) I caught these variants in the bags.
6-7) I caught the yellow in the bag, but I didn't notice there were 2 black 2x2 in the bag until I dumped it out. It's like the yellow.
8-9) I got 5 solid stud heads and 1 blocked open.
10-11) I thought I was wrong yesterday, but I had been right which means now I was wrong. The request I made to alleviate the undetermined part stands as true. That part really is in there. But there are also these others. Which are also shown on the box.
* Add 1 Part 3736 Light Gray Technic, Steering Pulley Large (Extra)
* Add 6 Part 3626ap01 Yellow Minifigure, Head Standard Grin Pattern - Solid Stud (match ID 4)
* Add 2 Part 3048c Black Slope 45 2 x 1 Triple with Inside Bar
* Add 2 Part 3049b Black Slope 45 2 x 1 Double / Inverted - without Bottom Tube or Bottom Stud Holder
* Change 1 Part Black {3962a Minifigure, Utensil Radio with Compact Handle to 3962b Minifigure, Utensil Radio with Extended Handle}
* Change 3 Part Black {4085a Plate, Modified 1 x 1 with Clip Vertical - Type 1 (thin open O clip) to 4085b Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip)}
* Change 7 Part Trans-Clear {3004 Brick 1 x 2 to 3004f1 Brick 1 x 2 Transparent with 'Frosted' Horizontal Line}
* Change 4 Part Trans-Clear {3010 Brick 1 x 4 to 3010f3 Brick 1 x 4 Transparent with 'Frosted' Horizontal Lines}
* Change 4 Part Yellow {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 2 Part Black {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 6 Part Yellow 3626bp01 Minifigure, Head Standard Grin Pattern - Blocked Open Stud {Regular to Alternate} {match ID 0 to 4}
Comments from Submitter:
Okay, I think I'm done going over everything.
1-2) I didn't get pics of these before I opened the bags. I can take pics but they wouldn't mean anything more than what I say they mean at this point.
3) This one is weird. The box says there is one, but there are two. One each in 2 identical part bags.
4-5) I caught these variants in the bags.
6-7) I caught the yellow in the bag, but I didn't notice there were 2 black 2x2 in the bag until I dumped it out. It's like the yellow.
8-9) I got 5 solid stud heads and 1 blocked open.
10-11) I thought I was wrong yesterday, but I had been right which means now I was wrong. The request I made to alleviate the undetermined part stands as true. That part really is in there. But there are also these others. Which are also shown on the box.
* Add 1 Part 3736 Light Gray Technic, Steering Pulley Large (Extra)
* Add 6 Part 3626ap01 Yellow Minifigure, Head Standard Grin Pattern - Solid Stud (match ID 4)
* Add 2 Part 3048c Black Slope 45 2 x 1 Triple with Inside Bar
* Add 2 Part 3049b Black Slope 45 2 x 1 Double / Inverted - without Bottom Tube or Bottom Stud Holder
* Change 1 Part Black {3962a Minifigure, Utensil Radio with Compact Handle to 3962b Minifigure, Utensil Radio with Extended Handle}
* Change 3 Part Black {4085a Plate, Modified 1 x 1 with Clip Vertical - Type 1 (thin open O clip) to 4085b Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip)}
* Change 7 Part Trans-Clear {3004 Brick 1 x 2 to 3004f1 Brick 1 x 2 Transparent with 'Frosted' Horizontal Line}
* Change 4 Part Trans-Clear {3010 Brick 1 x 4 to 3010f3 Brick 1 x 4 Transparent with 'Frosted' Horizontal Lines}
* Change 4 Part Yellow {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 2 Part Black {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 6 Part Yellow 3626bp01 Minifigure, Head Standard Grin Pattern - Blocked Open Stud {Regular to Alternate} {match ID 0 to 4}
Comments from Submitter:
Okay, I think I'm done going over everything.
1-2) I didn't get pics of these before I opened the bags. I can take pics but they wouldn't mean anything more than what I say they mean at this point.
3) This one is weird. The box says there is one, but there are two. One each in 2 identical part bags.
4-5) I caught these variants in the bags.
6-7) I caught the yellow in the bag, but I didn't notice there were 2 black 2x2 in the bag until I dumped it out. It's like the yellow.
8-9) I got 5 solid stud heads and 1 blocked open.
10-11) I thought I was wrong yesterday, but I had been right which means now I was wrong. The request I made to alleviate the undetermined part stands as true. That part really is in there. But there are also these others. Which are also shown on the box.
* Add 1 Part 3736 Light Gray Technic, Steering Pulley Large (Extra)
* Add 6 Part 3626ap01 Yellow Minifigure, Head Standard Grin Pattern - Solid Stud (match ID 4)
* Add 2 Part 3048c Black Slope 45 2 x 1 Triple with Inside Bar
* Add 2 Part 3049b Black Slope 45 2 x 1 Double / Inverted - without Bottom Tube or Bottom Stud Holder
* Change 1 Part Black {3962a Minifigure, Utensil Radio with Compact Handle to 3962b Minifigure, Utensil Radio with Extended Handle}
* Change 3 Part Black {4085a Plate, Modified 1 x 1 with Clip Vertical - Type 1 (thin open O clip) to 4085b Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip)}
* Change 7 Part Trans-Clear {3004 Brick 1 x 2 to 3004f1 Brick 1 x 2 Transparent with 'Frosted' Horizontal Line}
* Change 4 Part Trans-Clear {3010 Brick 1 x 4 to 3010f3 Brick 1 x 4 Transparent with 'Frosted' Horizontal Lines}
* Change 4 Part Yellow {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 2 Part Black {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 6 Part Yellow 3626bp01 Minifigure, Head Standard Grin Pattern - Blocked Open Stud {Regular to Alternate} {match ID 0 to 4}
Comments from Submitter:
Okay, I think I'm done going over everything.
1-2) I didn't get pics of these before I opened the bags. I can take pics but they wouldn't mean anything more than what I say they mean at this point.
3) This one is weird. The box says there is one, but there are two. One each in 2 identical part bags.
4-5) I caught these variants in the bags.
6-7) I caught the yellow in the bag, but I didn't notice there were 2 black 2x2 in the bag until I dumped it out. It's like the yellow.
8-9) I got 5 solid stud heads and 1 blocked open.
10-11) I thought I was wrong yesterday, but I had been right which means now I was wrong.
I am a little bit confused. So, you are now wrong that you were right or you
were right that you are now wrong?!
P.S. I am not sure what you mean by
1-2)...
3)....
4-5)...
I am not sure the order of your requests will be preserved once you submit them
and we see them here in a message, or maybe the order is preserved?
* Add 1 Part 3736 Light Gray Technic, Steering Pulley Large (Extra)
* Add 6 Part 3626ap01 Yellow Minifigure, Head Standard Grin Pattern - Solid Stud (match ID 4)
* Add 2 Part 3048c Black Slope 45 2 x 1 Triple with Inside Bar
* Add 2 Part 3049b Black Slope 45 2 x 1 Double / Inverted - without Bottom Tube or Bottom Stud Holder
* Change 1 Part Black {3962a Minifigure, Utensil Radio with Compact Handle to 3962b Minifigure, Utensil Radio with Extended Handle}
* Change 3 Part Black {4085a Plate, Modified 1 x 1 with Clip Vertical - Type 1 (thin open O clip) to 4085b Plate, Modified 1 x 1 with Clip Vertical - Type 2 (thin U clip)}
* Change 7 Part Trans-Clear {3004 Brick 1 x 2 to 3004f1 Brick 1 x 2 Transparent with 'Frosted' Horizontal Line}
* Change 4 Part Trans-Clear {3010 Brick 1 x 4 to 3010f3 Brick 1 x 4 Transparent with 'Frosted' Horizontal Lines}
* Change 4 Part Yellow {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 2 Part Black {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 6 Part Yellow 3626bp01 Minifigure, Head Standard Grin Pattern - Blocked Open Stud {Regular to Alternate} {match ID 0 to 4}
Comments from Submitter:
Okay, I think I'm done going over everything.
1-2) I didn't get pics of these before I opened the bags. I can take pics but they wouldn't mean anything more than what I say they mean at this point.
3) This one is weird. The box says there is one, but there are two. One each in 2 identical part bags.
4-5) I caught these variants in the bags.
6-7) I caught the yellow in the bag, but I didn't notice there were 2 black 2x2 in the bag until I dumped it out. It's like the yellow.
8-9) I got 5 solid stud heads and 1 blocked open.
10-11) I thought I was wrong yesterday, but I had been right which means now I was wrong.
I am a little bit confused. So, you are now wrong that you were right or you
were right that you are now wrong?!
P.S. I am not sure what you mean by
1-2)...
3)....
4-5)...
I am not sure the order of your requests will be preserved once you submit them
and we see them here in a message, or maybe the order is preserved?
* Change 1 Part Black {3962a Minifigure, Utensil Radio with Compact Handle to 3962b Minifigure, Utensil Radio with Extended Handle}
Wouldn't it make sense to keep 3962a as regular part? 3962b definitely did't
exist in 1984.
The same goes for
* Change 4 Part Yellow {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 2 Part Black {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 1 Part Black {3962a Minifigure, Utensil Radio with Compact Handle to 3962b Minifigure, Utensil Radio with Extended Handle}
Wouldn't it make sense to keep 3962a as regular part? 3962b definitely did't
exist in 1984.
The same goes for
* Change 4 Part Yellow {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 2 Part Black {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
considering who has added the 3003old.
Regards,
Jonas
I saw "inventoried from parts list" and didn't examine the change log. Perhaps
viejos can illuminate the situation?
* Change 1 Part Black {3962a Minifigure, Utensil Radio with Compact Handle to 3962b Minifigure, Utensil Radio with Extended Handle}
Wouldn't it make sense to keep 3962a as regular part? 3962b definitely did't
exist in 1984.
The same goes for
* Change 4 Part Yellow {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 2 Part Black {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
considering who has added the 3003old.
Regards,
Jonas
Read the inventory note that is currently attached to the inventory.
* Change 1 Part Black {3962a Minifigure, Utensil Radio with Compact Handle to 3962b Minifigure, Utensil Radio with Extended Handle}
Wouldn't it make sense to keep 3962a as regular part? 3962b definitely did't
exist in 1984.
The same goes for
* Change 4 Part Yellow {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
* Change 2 Part Black {3003old Brick 2 x 2 without Inside Supports to 3003 Brick 2 x 2}
USA, Oklahoma
)
)
)
)
)
)
)
)
)
)
Canada, British Columbia
Germany, Niedersachsen
