|
|
| | Author: | SezaR | Posted: | Dec 25, 2019 19:59 | Subject: | Inventory Change Request for Set 6351-1 | Viewed: | 28 times | Topic: | Inventories Requests (Entry) | Status: | Open | |
|
| Please make changes to the following inventory:
* Delete 1 Part 3183b White Plate, Modified 1 x 4 with Towball Socket, Long, 4 Slots (8mm Socket Length)
* Add 1 Part 3183c White Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
|
|
| | | | | |
| | | | Author: | SezaR | Posted: | Dec 25, 2019 20:01 | Subject: | Re: Inventory Change Request for Set 6351-1 | Viewed: | 16 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part 3183b White Plate, Modified 1 x 4 with Towball Socket, Long, 4 Slots (8mm Socket Length)
* Add 1 Part 3183c White Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
|
Source
https://www.brickpirate.net/forum/phpBB3/viewtopic.php?f=18&t=21547
|
|
|
| | | | | | | | | |
| | | | | | Author: | randyf | Posted: | Mar 7, 2020 14:52 | Subject: | Re: Inventory Change Request for Set 6351-1 | Viewed: | 30 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part 3183b White Plate, Modified 1 x 4 with Towball Socket, Long, 4 Slots (8mm Socket Length)
* Add 1 Part 3183c White Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
|
Source
https://www.brickpirate.net/forum/phpBB3/viewtopic.php?f=18&t=21547
|
Can you please enlighten me to exactly how can you tell from those images whether
the socket is 7mm or 8mm long?
Thanks,
Randy
|
|
| | | | | | | | | | | | | |
| | | | | | | | Author: | SezaR | Posted: | Mar 7, 2020 19:08 | Subject: | Re: Inventory Change Request for Set 6351-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part 3183b White Plate, Modified 1 x 4 with Towball Socket, Long, 4 Slots (8mm Socket Length)
* Add 1 Part 3183c White Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
|
Source
https://www.brickpirate.net/forum/phpBB3/viewtopic.php?f=18&t=21547
|
Can you please enlighten me to exactly how can you tell from those images whether
the socket is 7mm or 8mm long?
Thanks,
Randy
|
I have the two versions in my collection. From the photos, like this one
https://www.zupimages.net/up/18/43/msgc.jpg
I am 100% suer it is the 7mm long. I can take few photos of the two variations
for comparison, if that helps.
|
|
|
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | Author: | randyf | Posted: | Mar 7, 2020 20:59 | Subject: | Re: Inventory Change Request for Set 6351-1 | Viewed: | 33 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part 3183b White Plate, Modified 1 x 4 with Towball Socket, Long, 4 Slots (8mm Socket Length)
* Add 1 Part 3183c White Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
|
Source
https://www.brickpirate.net/forum/phpBB3/viewtopic.php?f=18&t=21547
|
Can you please enlighten me to exactly how can you tell from those images whether
the socket is 7mm or 8mm long?
Thanks,
Randy
|
I have the two versions in my collection. From the photos, like this one
https://www.zupimages.net/up/18/43/msgc.jpg
I am 100% suer it is the 7mm long. I can take few photos of the two variations
for comparison, if that helps.
|
How can *I* be 100% sure looking at that photo? I can't measure it, and 1mm
between versions is a very small amount. If you can set up a group of photos
that shows the 7mm version and the 8mm version built into the same arrangement
and angle as that photo, I might have more confidence in the change you are requesting.
The photos will need to be very clear, though.
Cheers,
Randy
|
|
|
| | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | Author: | SezaR | Posted: | Mar 8, 2020 00:51 | Subject: | Re: Inventory Change Request for Set 6351-1 | Viewed: | 29 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part 3183b White Plate, Modified 1 x 4 with Towball Socket, Long, 4 Slots (8mm Socket Length)
* Add 1 Part 3183c White Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
|
Source
https://www.brickpirate.net/forum/phpBB3/viewtopic.php?f=18&t=21547
|
Can you please enlighten me to exactly how can you tell from those images whether
the socket is 7mm or 8mm long?
Thanks,
Randy
|
I have the two versions in my collection. From the photos, like this one
https://www.zupimages.net/up/18/43/msgc.jpg
I am 100% suer it is the 7mm long. I can take few photos of the two variations
for comparison, if that helps.
|
How can *I* be 100% sure looking at that photo? I can't measure it, and 1mm
between versions is a very small amount. If you can set up a group of photos
that shows the 7mm version and the 8mm version built into the same arrangement
and angle as that photo, I might have more confidence in the change you are requesting.
The photos will need to be very clear, though.
|
I took some photos but I think the first photo is the best.
This part is composed of a towball socket that is attached to a 1*4 plate. Compare
the length of the slot with its distance from the "1*4 plate". For the 8mm variant,
the ratio is 3:2 but for the 7mm variant, the ratio is something around 5:1 or
4:1.
|
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | Author: | paulvdb | Posted: | Mar 8, 2020 03:20 | Subject: | Re: Inventory Change Request for Set 6351-1 | Viewed: | 25 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part 3183b White Plate, Modified 1 x 4 with Towball Socket, Long, 4 Slots (8mm Socket Length)
* Add 1 Part 3183c White Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
|
Source
https://www.brickpirate.net/forum/phpBB3/viewtopic.php?f=18&t=21547
|
Can you please enlighten me to exactly how can you tell from those images whether
the socket is 7mm or 8mm long?
Thanks,
Randy
|
I have the two versions in my collection. From the photos, like this one
https://www.zupimages.net/up/18/43/msgc.jpg
I am 100% suer it is the 7mm long. I can take few photos of the two variations
for comparison, if that helps.
|
How can *I* be 100% sure looking at that photo? I can't measure it, and 1mm
between versions is a very small amount. If you can set up a group of photos
that shows the 7mm version and the 8mm version built into the same arrangement
and angle as that photo, I might have more confidence in the change you are requesting.
The photos will need to be very clear, though.
|
I took some photos but I think the first photo is the best.
This part is composed of a towball socket that is attached to a 1*4 plate. Compare
the length of the slot with its distance from the "1*4 plate". For the 8mm variant,
the ratio is 3:2 but for the 7mm variant, the ratio is something around 5:1 or
4:1.
|
Distance between plate and slots is indeed the easiest way to verify this from
photos. This one clearly shows the c-variant. In addition to that I also have
this set in my personal collection. I just checked it and it also has the c-variant.
|
|
|
| | | | | | | | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | Author: | randyf | Posted: | Mar 8, 2020 03:57 | Subject: | Re: Inventory Change Request for Set 6351-1 | Viewed: | 31 times | Topic: | Inventories Requests | |
|
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, randyf writes:
| In Inventories Requests, SezaR writes:
| In Inventories Requests, SezaR writes:
| Please make changes to the following inventory:
* Delete 1 Part 3183b White Plate, Modified 1 x 4 with Towball Socket, Long, 4 Slots (8mm Socket Length)
* Add 1 Part 3183c White Plate, Modified 1 x 4 with Towball Socket, Short, 4 Slots (7mm Socket Length)
|
Source
https://www.brickpirate.net/forum/phpBB3/viewtopic.php?f=18&t=21547
|
Can you please enlighten me to exactly how can you tell from those images whether
the socket is 7mm or 8mm long?
Thanks,
Randy
|
I have the two versions in my collection. From the photos, like this one
https://www.zupimages.net/up/18/43/msgc.jpg
I am 100% suer it is the 7mm long. I can take few photos of the two variations
for comparison, if that helps.
|
How can *I* be 100% sure looking at that photo? I can't measure it, and 1mm
between versions is a very small amount. If you can set up a group of photos
that shows the 7mm version and the 8mm version built into the same arrangement
and angle as that photo, I might have more confidence in the change you are requesting.
The photos will need to be very clear, though.
|
I took some photos but I think the first photo is the best.
This part is composed of a towball socket that is attached to a 1*4 plate. Compare
the length of the slot with its distance from the "1*4 plate". For the 8mm variant,
the ratio is 3:2 but for the 7mm variant, the ratio is something around 5:1 or
4:1.
|
These will definitely help. Thank you!
|
|
|
|
|
|