Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | viejos  | | Posted: | Sep 21, 2014 23:28 | | Subject: | Re: Inventory Change Request for Set 75056-16 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
| In Inventories Requests, jennnifer writes:
| | | |
Judging from all of your requests, it's probably better if you actually change
the item itself, instad of have an alternate. (Since it seemed as if the original
submitter did not take variants of this type into consideration.)
|
Hello,
I am sorry, but I was very careful with these variants when entering the inventory
for this set. I am not surprised either that the sets found in Europe differ
slightly then the version I opened here in the U.S. I have observed a similar
pattern for many sets recently. I realize that there are many times when it seems
that variants for items are not verified correctly, but this is not one of them.
Thank you!
Jen
|
I agree about this part. I just confirmed this inventory:
and it had the grooved type of orange jumpers (with solid pin):
The white ones were these, right in the same set:
Russell
|
 |
| Author: | BLUSER_424058 | | Posted: | Sep 21, 2014 23:13 | | Subject: | Re: Cart Suggestion | | Viewed: | 52 times | | Topic: | Suggestions | |
| In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
These are multiple sellers, and you pay after an invoice, not automatically.
|
|
| Author: | starbeanie | | Posted: | Sep 21, 2014 23:05 | | Subject: | Re: Cart Suggestion | | Viewed: | 62 times | | Topic: | Suggestions | |
| In Suggestions, Neo_ writes:
| | In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
Except you can only pay after you have received an invoice from the seller.
|
|
| Author: | BLUSER_516094 | | Posted: | Sep 21, 2014 23:02 | | Subject: | Re: Cart Suggestion | | Viewed: | 66 times | | Topic: | Suggestions | |
| In Suggestions, Brettj666 writes:
| | In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
Doesn't change having to pay separately.
|
| Author: | Brettj666 | | Posted: | Sep 21, 2014 22:32 | | Subject: | Re: Cart Suggestion | | Viewed: | 62 times | | Topic: | Suggestions | |
| In Suggestions, Neo_ writes:
| | Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
After you've checked out (http://www.bricklink.com/orderPlaced.asp) or before?
|
| Author: | BLUSER_516094 | | Posted: | Sep 21, 2014 22:27 | | Subject: | Cart Suggestion | | Viewed: | 210 times | | Topic: | Suggestions | | Status: | Implemented | |
| Have one universal cart that has lists of all of the shops beneath it. Example:
eBay;s cart page. It's too hard to keep track of 30 different stores AND
pay separately.
|
|
| Author: | jennnifer | | Posted: | Sep 21, 2014 22:08 | | Subject: | Re: Inventory Change Request for Set 75056-16 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
| | |
Judging from all of your requests, it's probably better if you actually change
the item itself, instad of have an alternate. (Since it seemed as if the original
submitter did not take variants of this type into consideration.)
|
Hello,
I am sorry, but I was very careful with these variants when entering the inventory
for this set. I am not surprised either that the sets found in Europe differ
slightly then the version I opened here in the U.S. I have observed a similar
pattern for many sets recently. I realize that there are many times when it seems
that variants for items are not verified correctly, but this is not one of them.
Thank you!
Jen
|
|
| Author: | LordSkylark | | Posted: | Sep 21, 2014 21:31 | | Subject: | Re: Inventory Change Request for Set 75056-16 | | Viewed: | 33 times | | Topic: | Inventories Requests | |
| In Inventories Requests, elias3 writes:
| | Please make changes to the following inventory:
* Add 1 Part 3794 Orange Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Orange 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
Judging from all of your requests, it's probably better if you actually change
the item itself, instad of have an alternate. (Since it seemed as if the original
submitter did not take variants of this type into consideration.)
|
|
| Author: | QCBricks | | Posted: | Sep 21, 2014 18:34 | | Subject: | Inventory Change Request for Set 76005-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 15332 Black Fence Spindled 1 x 4 x 2 with 4 Studs (Alternate) (match ID 8)
* Change 2 Part Black 30055 Fence Spindled 1 x 4 x 2 with 2 Studs {match ID 0 to 8}
Comments from Submitter:
Verified from several sealed sets
|
|
| Author: | happygolucky | | Posted: | Sep 21, 2014 15:41 | | Subject: | Inventory Change Request for Set 70725-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 44676pb016 Tan Flag 2 x 2 Trapezoid with Black Phoenix on Gold Background Pattern on Both Sides (Stickers) - Set 70725 (Counterpart)
* Add 2 Part x1435pb010 Light Bluish Gray Flag 5 x 6 Hexagonal with Mechanical Hinge Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 2431pb354R White Tile 1 x 4 with Black Stripe, Gold Air Intake and Spatters Pattern Model Right Side (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 2431pb354L White Tile 1 x 4 with Black Stripe, Red Asian Characters, Gold Air Intake and Spatters Pattern Model Left Side (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 3068bpb881 Dark Bluish Gray Tile 2 x 2 with 'AA' on Screen, Red and White Buttons, 'K 35', Lever and Arrows Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 3068bpb880 Dark Bluish Gray Tile 2 x 2 with Screen with '38 2138' and 4 Red Buttons Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 87079pb189 Black Tile 2 x 4 with Control Panel with Saw Blade and 'LOCK' Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 87079pb188 Dark Bluish Gray Tile 2 x 4 with Red and Black MechDragon Tongue Pattern (Sticker) - Set 70725 (Counterpart)
* Add 1 Part 43712pb045 Dark Bluish Gray Wedge 6 x 4 Triple Curved with Riveted Metal Plates, Air Vent and Red Electricity Danger Sign Pattern (Stickers) - Set 70725 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
| Author: | john007 | | Posted: | Sep 21, 2014 12:24 | | Subject: | Inventory Change Request for Set 42029-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 6558 Blue Technic, Pin Long with Friction Ridges Lengthwise (Extra)
* Delete 1 Part 11214 Dark Bluish Gray Technic, Axle Pin 3L with Friction Ridges Lengthwise (Extra)
* Delete 1 Part 58176 White Light Cover with Internal Bar / Bionicle Barraki Eye (Extra)
* Add 1 Part 6589 Tan Technic, Gear 12 Tooth Bevel (Extra)
* Change {3 to 1} Part Red 3713 Technic Bush (Extra)
Comments from Submitter:
Extra pieces available just after building the A model, was a sealed set bought 1 month ago
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 10:27 | | Subject: | Inventory Change Request for Set 40083-1 | | Viewed: | 26 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 13971c01 Light Bluish Gray Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring with Black Tire Offset Tread - Band Around Center of Tread (13971 / 61254) (Counterpart)
* Add 4 Part 13971 Light Bluish Gray Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring (Alternate) (match ID 2)
* Change 4 Part Light Bluish Gray 56902 Wheel 18mm D. x 8mm with Fake Bolts and Shallow Spokes {match ID 0 to 2}
Comments from Submitter:
found the 13971 type in my set
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 07:21 | | Subject: | Inventory Change Request for Set 75056-16 | | Viewed: | 41 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3794 Orange Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Orange 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:35 | | Subject: | Inventory Change Request for Set 75056-20 | | Viewed: | 27 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3794 Red Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Red 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:35 | | Subject: | Inventory Change Request for Set 75056-18 | | Viewed: | 20 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3794 Dark Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Add 1 Part 553c Light Bluish Gray Brick, Round 2 x 2 Dome Top - Hollow Stud with Bottom Axle Holder x Shape + Orientation (Alternate) (match ID 2)
* Change 1 Part Dark Bluish Gray 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
* Change 1 Part Light Bluish Gray 553b Brick, Round 2 x 2 Dome Top - Blocked Open Stud with Bottom Axle Holder x Shape + Orientation {match ID 0 to 2}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
and for the 553 the -c type
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:34 | | Subject: | Inventory Change Request for Set 75056-10 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3794 Dark Bluish Gray Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Dark Bluish Gray 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:34 | | Subject: | Inventory Change Request for Set 75056-7 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3794 Blue Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 1 Part Blue 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 21, 2014 06:34 | | Subject: | Inventory Change Request for Set 75056-2 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 2 Part 3794 Dark Blue Plate, Modified 1 x 2 with 1 Stud (Jumper) (Alternate) (match ID 1)
* Change 2 Part Dark Blue 3794b Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper) {match ID 0 to 1}
Comments from Submitter:
my part-out sets came all with the 'without' version for this color in this subset
|
|
| Author: | elias3 | | Posted: | Sep 20, 2014 13:08 | | Subject: | Re: Inventory Change Request for Set 41016-15 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, dmaster.hu writes:
| | Please make changes to the following inventory:
* Delete 1 Part 4589b White Cone 1 x 1 with Top Groove (Extra)
* Change {1 to 2} Part White 4589b Cone 1 x 1 with Top Groove
|
you're right 
|
| Author: | dmaster.hu | | Posted: | Sep 20, 2014 12:55 | | Subject: | Inventory Change Request for Set 41016-15 | | Viewed: | 32 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Delete 1 Part 4589b White Cone 1 x 1 with Top Groove (Extra)
* Change {1 to 2} Part White 4589b Cone 1 x 1 with Top Groove
|
|
| Author: | taxan | | Posted: | Sep 20, 2014 12:32 | | Subject: | Re: Inventory Change Request for Set 75016-1 | | Viewed: | 17 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, taxan writes:
| | In Inventories Requests, TakeAbricK writes:
| | In Inventories Requests, namraah writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Most of the time these parts come in a set with 1 extra.
Are you sure there's only 1, or should it be 1 regular, 1 extra?
Diana
|
From what i can see from the picture of the set and the instructions there are
2.
On at the top of the Spider and the other are used by a Minifig for a Lightsaber.
The Minifig don't have it in its inventory.
Have a nice day.
taxan
|
Change of this invetory is almost correct in the set is only one
in metalic silver color for minifig second one is extra. So
change is partial correct. One should be added as extra also in this color.
In the set they are also 2 of this part but in LBG color used in main
build. So on the top of "Spider" you see it but in LBG color.
|
BTW
in metalic silver color was only used in Star Wars sets and
when you analyse them this particular color was only use for lightsabers. Never
for any main build as I recall.
http://www.bricklink.com/catalogItemIn.asp?P=64567&colorID=67&in=A
|
Cancel my post, I was wrong (dam those online hard to read .pdf).
Your right there are 3 in the instruction, 2 LBG and 1 Metallic Silver so the
the last on should be moved to "Extra".
Have a nice day.
taxan
|
|
| Author: | Hygrotus | | Posted: | Sep 20, 2014 11:14 | | Subject: | Re: Inventory Change Request for Set 75016-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Hygrotus writes:
| | In Inventories Requests, taxan writes:
| | In Inventories Requests, TakeAbricK writes:
| | In Inventories Requests, namraah writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Most of the time these parts come in a set with 1 extra.
Are you sure there's only 1, or should it be 1 regular, 1 extra?
Diana
|
From what i can see from the picture of the set and the instructions there are
2.
On at the top of the Spider and the other are used by a Minifig for a Lightsaber.
The Minifig don't have it in its inventory.
Have a nice day.
taxan
|
Change of this invetory is almost correct in the set is only one
in metalic silver color for minifig second one is extra. So
change is partial correct. One should be added as extra also in this color.
In the set they are also 2 of this part but in LBG color used in main
build. So on the top of "Spider" you see it but in LBG color.
|
BTW
in metalic silver color was only used in Star Wars sets and
when you analyse them this particular color was only use for lightsabers. Never
for any main build as I recall.
http://www.bricklink.com/catalogItemIn.asp?P=64567&colorID=67&in=A
|
|
| Author: | Hygrotus | | Posted: | Sep 20, 2014 11:10 | | Subject: | Re: Inventory Change Request for Set 75016-1 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, taxan writes:
| | In Inventories Requests, TakeAbricK writes:
| | In Inventories Requests, namraah writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Most of the time these parts come in a set with 1 extra.
Are you sure there's only 1, or should it be 1 regular, 1 extra?
Diana
|
From what i can see from the picture of the set and the instructions there are
2.
On at the top of the Spider and the other are used by a Minifig for a Lightsaber.
The Minifig don't have it in its inventory.
Have a nice day.
taxan
|
Change of this invetory is almost correct in the set is only one
in metalic silver color for minifig second one is extra. So
change is partial correct. One should be added as extra also in this color.
In the set they are also 2 of this part but in LBG color used in main
build. So on the top of "Spider" you see it but in LBG color.
|
|
| Author: | TakeAbricK | | Posted: | Sep 20, 2014 04:02 | | Subject: | Re: Inventory Change Request for Set 75016-1 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| In Inventories Requests, namraah writes:
| | Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
Most of the time these parts come in a set with 1 extra.
Are you sure there's only 1, or should it be 1 regular, 1 extra?
Diana
|
| Author: | namraah | | Posted: | Sep 20, 2014 03:31 | | Subject: | Inventory Change Request for Set 75016-1 | | Viewed: | 36 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {2 to 1} Part Metallic Silver 64567 Minifig, Weapon Lightsaber Hilt Straight
Comments from Submitter:
there is only one in this set, not two
|
|
| Author: | viejos | | Posted: | Sep 19, 2014 22:50 | | Subject: | Re: BrickLink China店铺微博推广活动诚邀您的加入 | | Viewed: | 68 times | | Topic: | Announce | |
| In 中文, cs_china writes:
| | 尊敬的卖家您好，
BrickLink（以下简称BL）的中文页BrickLink China（以下简称BLC）已经推出1个月了。感谢大家一直以来对BLC的期待和鼓励。
访问BrickLink China：http://www.bricklink.com/china/
我们开设了BLC的新浪官方微博平台：BricklinkChina，欢迎您关注我们。
我们的微博地址：http://weibo.com/u/2833298890
BrickLink China店铺微博推广活动：
如果您在店铺的Splash和Store Terms页中加入中文的店铺指南和介绍，并允许发货到中国大陆、香港、台湾、澳门和新加坡，我们会定期在微博平台免费推送您的BL店铺，让更多的中文用户看到您的商店。
我们还将在近期开设支付宝等其他中国大陆第三方支付平台交易方式，方便中国大陆地区买家的购买。
希望您能经常在讨论区的中文分区发布新的主题帖。让更多的中文用户加入到BLC的讨论中来。中文区暂不设有分区和主题，大家可以直接发布自己的讨论帖。
如果您对BL有任何宝贵意见和建议，请随时回复本帖告知我们。
BrickLink China工作团队期待您的回复！
——BrickLink China团队
客户服务与支持
|
显然，我们有一个新的讨论主持人，cs_china。欢迎登机！
http://www.bricklink.com/memberAdmins.asp
|
|
| Author: | gvbricks | | Posted: | Sep 19, 2014 17:06 | | Subject: | Inventory Change Request for Set 79007-1 | | Viewed: | 37 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 4 Part 30237b Black Brick, Modified 1 x 2 with Vertical Clip (thick open O clip) (Alternate) (match ID 1)
* Change 4 Part Black 30237 Brick, Modified 1 x 2 with Vertical Clip {match ID 0 to 1}
|
| Author: | jancg | | Posted: | Sep 19, 2014 05:11 | | Subject: | Re: Inventory Change Request for Set 4477-1 | | Viewed: | 20 times | | Topic: | Inventories Requests | |
| Again, instead of fiddling with alternate parts, I propose to add an alternate
set 4477-2 to the catalog. This would also make it easy to incorporate the alternate
instructions.
|
|
| Author: | GeekySabrina | | Posted: | Sep 19, 2014 04:52 | | Subject: | Re: Inventory Change Request for Set 4477-1 | | Viewed: | 26 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Brickwilbo writes:
| | In Inventories Requests, Brickwilbo writes:
| | In Inventories Requests, Ogdy writes:
| | Please make changes to the following inventory:
* Change {3 to 2} Part Dark Gray 3460 Plate 1 x 8
Comments from Submitter:
Need only 2 of this part in Step 10 of the instruction. Couldn't find any further usage.
Maybe there are different instructions, perhaps someone could check this.
|
The 3d is in step 17 on top.
|
|
Well, so it seems there are at least 2 different instructions.
In mine there is no such part in step 17.
Instruction has Number 4193291 (c) 2003.
|
|
|
| Author: | Brickwilbo | | Posted: | Sep 19, 2014 04:18 | | Subject: | Re: Inventory Change Request for Set 4477-1 | | Viewed: | 27 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Brickwilbo writes:
| | In Inventories Requests, Ogdy writes:
| | Please make changes to the following inventory:
* Change {3 to 2} Part Dark Gray 3460 Plate 1 x 8
Comments from Submitter:
Need only 2 of this part in Step 10 of the instruction. Couldn't find any further usage.
Maybe there are different instructions, perhaps someone could check this.
|
The 3d is in step 17 on top.
|
|
|
|
| Author: | Brickwilbo | | Posted: | Sep 19, 2014 04:16 | | Subject: | Re: Inventory Change Request for Set 4477-1 | | Viewed: | 32 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Ogdy writes:
| | Please make changes to the following inventory:
* Change {3 to 2} Part Dark Gray 3460 Plate 1 x 8
Comments from Submitter:
Need only 2 of this part in Step 10 of the instruction. Couldn't find any further usage.
Maybe there are different instructions, perhaps someone could check this.
|
The 3d is in step 17 on top.
|
|
| Author: | GeekySabrina | | Posted: | Sep 19, 2014 04:13 | | Subject: | Inventory Change Request for Set 4477-1 | | Viewed: | 46 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change {3 to 2} Part Dark Gray 3460 Plate 1 x 8
Comments from Submitter:
Need only 2 of this part in Step 10 of the instruction. Couldn't find any further usage.
Maybe there are different instructions, perhaps someone could check this.
|
| Author: | dmaster.hu | | Posted: | Sep 19, 2014 03:39 | | Subject: | Inventory Change Request for Set 6780-1 | | Viewed: | 30 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Part White {4774cU Electric, Sound Siren 9V 2 x 2 x 1 1/3 Undetermined Noise Type to 4774c02 Electric, Sound Siren 9V 2 x 2 x 1 1/3 with Two Space Noises}
|
| Author: | Miro78 | | Posted: | Sep 18, 2014 16:44 | | Subject: | Re: Inventory Change Request for Set 21107-1 | | Viewed: | 18 times | | Topic: | Inventories Requests | |
| In Inventories Requests, poskar writes:
| | Please make changes to the following inventory:
* Add 3 Minifig min008 Minecraft Figure Micromob Enderman
|
You have to also submit part deletion requests for the individual parts that
make up these minifigs, in order to keep the total parts in a set constant.
Miro
|
| Author: | poskar | | Posted: | Sep 18, 2014 16:41 | | Subject: | Inventory Change Request for Set 21107-1 | | Viewed: | 35 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 3 Minifig min008 Minecraft Figure Micromob Enderman
|
| Author: | StarBrick | | Posted: | Sep 18, 2014 15:58 | | Subject: | Re: Negative Feedback Note | | Viewed: | 56 times | | Topic: | Suggestions | |
| Thanks!
Voted YES!!!
|
| Author: | Hygrotus | | Posted: | Sep 18, 2014 15:06 | | Subject: | Inventory Change Request for Set 75052-1 | | Viewed: | 28 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Change 1 Minifig {sw548 Stormtrooper (Tatooine) with Dirt Stains, Patterned Head (Sandtrooper) (75052) to sw548a Stormtrooper (Tatooine) with Black Pauldron, Re-Breather on Back, Dirt Stains, Patterned Head (Sandtrooper) (75052)}
Comments from Submitter:
Correct minifig assembly for this set
|
|
| Author: | jennnifer | | Posted: | Sep 18, 2014 12:01 | | Subject: | Re: Inventory Change Request for Book B110 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Pippin writes:
| | This set also contains two black rubber rings that fit around Part 3736 (Technic,
Steering Pulley Large). They are distinctly different from the rubber belts (x89,
x90, etc). I cannot locate the item in the Bricklink Catalog.
|
It would be great if you could add these to the catalog. The note on this inventory
does indicate that these parts are missing.
Thanks!
Jen
|
|
| Author: | LordSkylark | | Posted: | Sep 18, 2014 10:58 | | Subject: | Re: Inventory Change Request for Book B110 | | Viewed: | 21 times | | Topic: | Inventories Requests | |
| In Inventories Requests, Pippin writes:
| | This set also contains two black rubber rings that fit around Part 3736 (Technic,
Steering Pulley Large). They are distinctly different from the rubber belts (x89,
x90, etc). I cannot locate the item in the Bricklink Catalog.
|
Feel free to add them to the catalog then.
|
| Author: | elias3 | | Posted: | Sep 18, 2014 06:01 | | Subject: | Inventory Change Request for Set 7945-1 | | Viewed: | 33 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 30000pb02 Dark Bluish Gray Brick, Modified 2 x 2 with Pins and Axle Hole with Red and White Danger Stripes Pattern (Sticker) - Set 7945 (Counterpart)
|
|
| Author: | happygolucky | | Posted: | Sep 18, 2014 05:27 | | Subject: | Inventory Change Request for Set 70727-1 | | Viewed: | 22 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 85984pb062 Red Slope 30 1 x 2 x 2/3 with Silver Oscilloscope with Sine Wave Pattern (Sticker) - Set 70727 (Counterpart)
* Add 1 Part 50950pb077L Red Slope, Curved 3 x 1 No Studs with White, Yellow and Dark Red Flame Pattern Model Left Side (Sticker) - Set 70727 (Counterpart)
* Add 1 Part 50950pb077R Red Slope, Curved 3 x 1 No Studs with White, Yellow and Dark Red Flame Pattern Model Right Side (Sticker) - Set 70727 (Counterpart)
* Add 1 Part 93606pb028 Red Slope, Curved 4 x 2 No Studs with Silver Engine Pattern (Sticker) - Set 70727 (Counterpart)
* Add 2 Part 32271pb010 Black Technic, Liftarm 1 x 9 Bent (7 - 3) Thick with Tread Plate, Black Triangle and Rectangle on Silver Background Pattern (Sticker) - Set (Counterpart)
* Add 1 Part 61071pb006 Red Technic, Panel Car Mudguard Left with White, Yellow and Dark Red Flames Pattern (Sticker) - Set 70727 (Counterpart)
* Add 1 Part 61070pb006 Red Technic, Panel Car Mudguard Right with White, Yellow and Dark Red Flames Pattern (Sticker) - Set 70727 (Counterpart)
* Add 2 Part 47753pb057 Red Wedge 4 x 4 No Top Studs with 3 Air Intakes Pattern (Sticker) - Set 70727 (Counterpart)
Comments from Submitter:
Adding stickered counterparts to inventory. Thank you.
|
|
| Author: | bb271702 | | Posted: | Sep 18, 2014 03:47 | | Subject: | Inventory Change Request for Set 8653-1 | | Viewed: | 31 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 3004pb120 Black Brick 1 x 2 with Ferrari Logo, Silver Horse Pattern on End (Sticker) - Set 8653 (Counterpart)
* Add 1 Part 32316pb008 Red Technic, Liftarm 1 x 5 Thick with Ferrari Logo Pattern (Sticker) - Set 8653 (Counterpart)
* Add 1 Part 40490pb011 Red Technic, Liftarm 1 x 9 Thick with Silver 'Ferrari' Pattern (Sticker) - Set 8653 (Counterpart)
* Add 1 Part 44350pb020 Red Technic, Panel Fairing #20 Large Long, Small Hole, Side A with 'pininfarina' Pattern (Sticker) - Set 8653 (Counterpart)
* Add 1 Part 44351pb020 Red Technic, Panel Fairing #21 Large Long, Small Hole, Side B with 'pininfarina' Pattern (Sticker) - Set 8653 (Counterpart)
Comments from Submitter:
Apart from the 3 stickered assy's, which didn't make it past scrutineering, these complete the stickered parts in this set
|
|
| Author: | Pippin | | Posted: | Sep 17, 2014 21:05 | | Subject: | Re: Inventory Change Request for Book B110 | | Viewed: | 22 times | | Topic: | Inventories Requests | |
| This set also contains two black rubber rings that fit around Part 3736 (Technic,
Steering Pulley Large). They are distinctly different from the rubber belts (x89,
x90, etc). I cannot locate the item in the Bricklink Catalog.
|
|
| Author: | Pippin | | Posted: | Sep 17, 2014 20:05 | | Subject: | Inventory Change Request for Book B110 | | Viewed: | 34 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory: [B=B110]
* Add 4 Part 3701 Dark Bluish Gray Technic, Brick 1 x 4 with Holes (Alternate) (match ID 1)
* Add 2 Part 3894 Dark Bluish Gray Technic, Brick 1 x 6 with Holes (Alternate) (match ID 2)
* Add 2 Part 3895 Dark Bluish Gray Technic, Brick 1 x 12 with Holes (Alternate) (match ID 3)
* Add 3 Part 3647 Dark Bluish Gray Technic, Gear 8 Tooth Type 1 (Alternate) (match ID 4)
* Add 2 Part 3736 Black Technic, Steering Pulley Large (Alternate) (match ID 5)
* Change 4 Part Black 3701 Technic, Brick 1 x 4 with Holes {match ID 0 to 1}
* Change 2 Part Black 3894 Technic, Brick 1 x 6 with Holes {match ID 0 to 2}
* Change 2 Part Black 3895 Technic, Brick 1 x 12 with Holes {match ID 0 to 3}
* Change 3 Part Black 3647 Technic, Gear 8 Tooth Type 1 {match ID 0 to 4}
* Change 2 Part Light Bluish Gray 3736 Technic, Steering Pulley Large {match ID 0 to 5}
Comments from Submitter:
My set - purchased in Australia - came with alternative colours for five different Technic parts.
|
|
| Author: | rtzx9r | | Posted: | Sep 17, 2014 17:07 | | Subject: | Re: Negative Feedback Note | | Viewed: | 65 times | | Topic: | Suggestions | |
| In Suggestions, DarkDragon writes:
| | That's quite wordy. I don't think people will read it.
|
A few more paragraphs Ken, and you'll be into Foster territory.
|
| Author: | Made_In_Bricks | | Posted: | Sep 17, 2014 15:33 | | Subject: | Re: Negative Feedback Note | | Viewed: | 76 times | | Topic: | Suggestions | |
| In Suggestions, DarkDragon writes:
| | That's quite wordy. I don't think people will read it.
|
I thought the first one was wordy too, this is just more wordy , but bullet
form would work thought too
Ken
|
| Author: | DarkDragon | | Posted: | Sep 17, 2014 15:12 | | Subject: | Re: Negative Feedback Note | | Viewed: | 77 times | | Topic: | Suggestions | |
| | That's quite wordy. I don't think people will read it. |
| Author: | bagelboybugle | | Posted: | Sep 17, 2014 14:59 | | Subject: | Re: BrickLink China店鋪微博推廣活動誠邀您的加入 | | Viewed: | 83 times | | Topic: | Problem | |
| In Problem, ToddMyers writes:
| | Reported cs_china as a fraud account. If this were a legit account, it should
be listed as "BrickLink Administrator" (as is done with other legitimate cs accounts).
|
I agree and there are no announcements on the issue so this thread can be unlocked
by cs team later if it is genuine
Gareth
|
|
| Author: | Made_In_Bricks | | Posted: | Sep 17, 2014 14:31 | | Subject: | Negative Feedback Note | | Viewed: | 257 times | | Topic: | Suggestions | | Status: | Open | | Vote: | [Yes|No] | |
| Was leaving feedback on a completed NPB and got this message
"You have just left a negative feedback comment. If this is due to non payment
then please go to the problem order page to see your next available options on
how you may proceed with your complaint."
This was after a NPB was completed...
I like there being a message, I just wish it was different.
I would prefer a message saying something along these lines:
And the voting for my suggestions is changing it to the following text
"You have just left a negative feedback comment. Have you contacted the buyer/seller?
If you were unable to resolve your issues please go to the problem order page
to see your next available options on how you may proceed with your complaint.
Leaving negative feedback before contacting the buyer/seller should only be
left AFTER you have attempted to resolve through the buyer/seller"
with buyer/seller being appropriately substituted for your situation.
Thanks,
Ken
|
|
| Author: | ZwarteMagica | | Posted: | Sep 17, 2014 14:20 | | Subject: | Inventory Change Request for Set 7905-1 | | Viewed: | 21 times | | Topic: | Inventories Requests (Entry) | | Status: | Open | |
| Please make changes to the following inventory:
* Add 1 Part 73090bpb01 Black Boat Weight 2 x 6 x 2 - Bottom Sealed, Dimple on Ends with White '7905' Pattern (Sticker) - Set 7905 (Alternate)
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
)
)
